ALTIGA-IP-STATS-MIB device MIB details by Altiga Networks Inc

ALTIGA-IP-STATS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ALTIGA-IP-STATS-MIB.

Vendor:	Altiga Networks Inc
Mib:	ALTIGA-IP-STATS-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *------------------------------------------------------------------
-- * ALTIGA-IP-STATS-MIB.my:  Altiga IP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-IP-STATS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Integer32
         FROM SNMPv2-SMI
      OBJECT-GROUP, MODULE-COMPLIANCE
         FROM SNMPv2-CONF
      alStatsIp, alIpGroup
         FROM ALTIGA-MIB
      alIpMibModule
         FROM ALTIGA-GLOBAL-REG;

   altigaIpStatsMibModule MODULE-IDENTITY
      LAST-UPDATED   "200209051300Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Altiga IP Statistics MIB models counters and objects that are
          of management interest for IP.
         
          Acronyms
          The following acronyms are used in this document:

            IP:         Internet Protocol

            LAN:        Local-Area Network 

            MIB:        Management Information Base

         "

        REVISION "200209051300Z"
        DESCRIPTION
                "Added module compliance."

        REVISION "200207100000Z"
        DESCRIPTION
                "Updated with new header"

      ::= { alIpMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

alStatsIpGlobal   OBJECT IDENTIFIER ::= { alStatsIp 1 }

alIpInterfaceStatsTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF AlIpInterfaceStatsEntry
   MAX-ACCESS  not-accessible  
   STATUS      current
   DESCRIPTION
      "IP Interface Statistics table."
   ::= { alStatsIpGlobal 1 }

alIpInterfaceStatsEntry OBJECT-TYPE
   SYNTAX      AlIpInterfaceStatsEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
      "An entry in the alIpInterfaceStatsTable."
   INDEX    { alIpInterfaceStatsIndex }
   ::= { alIpInterfaceStatsTable 1 }

AlIpInterfaceStatsEntry ::= SEQUENCE {
   alIpInterfaceStatsIndex         Integer32,
   alIpInterfaceStatsCurrentDuplex INTEGER
}

alIpInterfaceStatsIndex    OBJECT-TYPE
   SYNTAX         Integer32(0..2147483647)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The ifIndex of this row."
   ::= { alIpInterfaceStatsEntry 1 }

alIpInterfaceStatsCurrentDuplex     OBJECT-TYPE
   SYNTAX         INTEGER {
                     full(2),
                     half(3)
                  }
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current LAN duplex mode for this interface."
   ::= { alIpInterfaceStatsEntry 2 }

altigaIpStatsMibConformance OBJECT IDENTIFIER ::= { altigaIpStatsMibModule 1 }
altigaIpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaIpStatsMibConformance 1 }

altigaIpStatsMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which 
       implement the Altiga IP Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      altigaIpStatsGroup
   }
   ::= { altigaIpStatsMibCompliances 1 }

altigaIpStatsGroup OBJECT-GROUP
   OBJECTS
   {
      alIpInterfaceStatsIndex,
                alIpInterfaceStatsCurrentDuplex
   }
   STATUS   current
   DESCRIPTION
          "The objects for Ip Statistics."
   ::= { alIpGroup 2 }

END