You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-ATM-CONN-INFO-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-ATM-CONN-INFO-MIB by vendor Cisco

CISCO-ATM-CONN-INFO-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-ATM-CONN-INFO-MIB.


Vendor: Cisco
Mib: CISCO-ATM-CONN-INFO-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-ATM-CONN-INFO-MIB
--
-- April 2003, Rashmi Purandare
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-ATM-CONN-INFO-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Gauge32,
    Unsigned32                  FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP                FROM SNMPv2-CONF
    ifIndex                     FROM IF-MIB
    ciscoMgmt                   FROM CISCO-SMI
    TEXTUAL-CONVENTION          FROM SNMPv2-TC;

ciscoAtmConnInfoMIB MODULE-IDENTITY
         LAST-UPDATED    "200306160000Z"
         ORGANIZATION    "Cisco Systems, Inc."
         CONTACT-INFO
                 "       Cisco Systems
                         Customer Service

                 Postal: 170 W Tasman Drive
                         San Jose, CA  95134
                         USA

                         Tel: +1 800 553-NETS

                 E-mail: cs-wanatm@cisco.com"
         DESCRIPTION
                 "The MIB module for providing the parameters 
                  configured on an ATM interface.
                  Terminologies used:
                  SVC  : Switched Virtual Channel
                  SPVC : Soft Permanent Virtual Circuit
                  SPVP : Soft Permanent Virtual Path
                  SVPC : Switched Virtual Path Connection
                  DAX  : Connection with endpoints on the same 
                         ATM switch
                  P2p  : Point-to-point connection
                  P2mp : Point-to-multi-point connection
                  Root : The root of point-to-multipoint connection,
                         which is associated with a VPI/VCI
                  Leaf : Usually one point-to-multipoint connection
                         consists of one root and one or more leaves. 
                         Leaf is the branch point for point 
                         to multipoint connection that is 
                         associated with a VPI/VCI
                  Party: One or more party is associated with each 
                         leaf, all parties are associated with 
                         the same VPI/VCI that its leaf belongs to
                  
                  Source           Via Node           Destination
                  -------          -------            -------
                 A|     |B        C|     |D          E|     |F
                --+-----+----------+-----+------------+-----+--
                  |     |          |     |            |     |     
                  -------          -------            -------
                  Each active connection has two terminating 
                  endpoints. 
                  In the above diagram, Endpoints A and F are 
                  terminating.
                  Of these the master endpoint of the connection 
                  initiates the routing of the call and is 
                  considered the calling party. The slave endpoint
                  is the called party which receives calls and is 
                  the destination of a call.
                  Any endpoints that are created either on Via nodes 
                  or on the node with the terminating endpoint in 
                  order to have a complete connections between 
                  endpoints A and F are said to be intermediate 
                  endpoints. In the above diagram, endpoints B, C, 
                  D and E are intermediate endpoints.
                  "
         REVISION        "200306160000Z"
         DESCRIPTION
                 "Initial version of the MIB."
         ::= { ciscoMgmt 9999 }

caciMIBNotifications     OBJECT IDENTIFIER ::= { ciscoAtmConnInfoMIB 0 }
caciMIBObjects    OBJECT IDENTIFIER ::= { ciscoAtmConnInfoMIB 1 }

-- conn statistics
caciAtmConnInfo             OBJECT IDENTIFIER ::= { caciMIBObjects 1 }
caciIfInfo                  OBJECT IDENTIFIER ::= { caciAtmConnInfo 1 }
caciP2pConns                OBJECT IDENTIFIER ::= { caciAtmConnInfo 2 }
caciP2pEndpoints            OBJECT IDENTIFIER ::= { caciAtmConnInfo 3 }
caciP2pIntEndpoints         OBJECT IDENTIFIER ::= { caciAtmConnInfo 4 }
caciP2mpConns               OBJECT IDENTIFIER ::= { caciAtmConnInfo 5 }
caciGeneric                 OBJECT IDENTIFIER ::= { caciAtmConnInfo 6 }

-- Textual conventions

CaciGeneralConnEPCategory::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "General category for connection or endpoint types 
         supported on the switch.
         caciP2p    : Point to point connection
         caciP2mpR  : Point to multi point root connection
         caciP2mpL  : Point to multi point leaf connection
         caciP2mpPty: Point to multi point party connection"
    SYNTAX INTEGER {
               caciP2p(1),
               caciP2mpR(2),
               caciP2mpL(3),
               caciP2mpPty(4)
              }

CaciP2pConnCategory::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The connection category.
         caciP2pSvcc : Point to point Svc connection
         caciP2pSvpc : Point to point Svpc connection
         caciP2pSpvcD: Point to point Spvc DAX connection
         caciP2pSpvpD: Point to point Spvp DAX connection
         caciP2pSpvcR: Point to point SPVC Routed connection
         caciP2pSpvpR: Point to point Spvp Routed connection"
    SYNTAX INTEGER {
               caciP2pSvcc(1),
               caciP2pSvpc(2),
               caciP2pSpvcD(3),
               caciP2pSpvpD(4),
               caciP2pSpvcR(5),
               caciP2pSpvpR(6)
              }

CaciP2pEndpointCategory::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The terminating endpoint category.
        caciP2pSpvcRPEP : Point to point Spvc 
                          Routed Persistent endpoint
        caciP2pSpvcRNPEP: Point to point Spvc 
                          Routed Non-persistent endpoint
        caciP2pSpvpRPEP : Point to point Spvp 
                          Routed Persistent endpoint
        caciP2pSpvpRNPEP: Point to point Spvp 
                          Routed Non-persistent endpoint
        caciP2pSpvcDEP  : Point to point Spvc 
                          DAX endpoint
        caciP2pSpvpDEP  : Point to point Spvp 
                          DAX endpoint"
    SYNTAX INTEGER {
            caciP2pSpvcRPEP(1),
            caciP2pSpvcRNPEP(2),
            caciP2pSpvpRPEP(3),
            caciP2pSpvpRNPEP(4),
            caciP2pSpvcDEP(5),
            caciP2pSpvpDEP(6)
    }

CaciP2pIntEndpointCategory::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The intermediate endpoint category.
         caciP2pSvccIntEP : Point to point Svc 
                            intermediate endpoint
         caciP2pSvpcIntEP : Point to point Svpc 
                            intermediate endpoint
         caciP2pSpvcRIntEP: Point to point Spvc Routed 
                            intermediate endpoint
         caciP2pSpvpRIntEP: Point to point Spvp Routed 
                            intermediate endpoint"
    SYNTAX INTEGER {
               caciP2pSvccIntEP(1),
               caciP2pSvpcIntEP(2),
               caciP2pSpvcRIntEP(3),
               caciP2pSpvpRIntEP(4)
              }

CaciP2mpConnCategory::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The point to multipoint connection category.
         caciP2mpSvcRoot  : Point to multipoint Svc 
                            root connection
         caciP2mpSvcLeaf  : Point to multipoint Svc 
                            leaf connection
         caciP2mpSvcParty : Point to multipoint Svc 
                            party connection
         caciP2mpSvpcRoot : Point to multipoint Svpc 
                            root connection
         caciP2mpSvpcLeaf : Point to multipoint Svpc 
                            leaf connection
         caciP2mpSvpcParty: Point to multipoint Svpc 
                            party connection
         caciP2mpSpvcP    : Point to multipoint Spvc
                            persistent connection
         caciP2mpSpvcNP   : Point to multipoint Spvc
                            non-persistent connection
         caciP2mpSpvcAct  : Point to multipoint Spvc
                            Active connection
         caciP2mpSpvpP    : Point to multipoint Spvp
                            persistent connection
         caciP2mpSpvpNP   : Point to multipoint Spvp
                            non-persistent connection
         caciP2mpSpvpAct  : Point to multipoint Spvp
                            active connection
         caciP2mpSpvcPaP  : Point to multipoint Spvc
                            party persistent connection
         caciP2mpSpvcPaAct: Point to multipoint Spvc
                            party active connection
         caciP2mpSpvpPaP  : Point to multipoint Spvp
                            party persistent connection
         caciP2mpSpvpPaAct: Point to multipoint Spvp 
                            party active connection"
    SYNTAX INTEGER {
               caciP2mpSvcRoot(1),
               caciP2mpSvcLeaf(2),
               caciP2mpSvcParty(3),
               caciP2mpSvpcRoot(4),
               caciP2mpSvpcLeaf(5),
               caciP2mpSvpcParty(6),
               caciP2mpSpvcP(7),
               caciP2mpSpvcNP(8),
               caciP2mpSpvcAct(9),
               caciP2mpSpvpP(10),
               caciP2mpSpvpNP(11),
               caciP2mpSpvpAct(12),
               caciP2mpSpvcPaP(13),
               caciP2mpSpvcPaAct(14),
               caciP2mpSpvpPaP(15),
               caciP2mpSpvpPaAct(16)
              }

CaciATMEndpointCategory::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The connection category.
         caciTotalSpvc   : Total SPVC endpoints configured 
                           on the ATM switch
         caciP2pTotalInt : Total intermediate endpoints
                           configured on the ATM switch
         caciTotalMaster : Total master endpoints configured
                           on the ATM switch
         caciTotalSlave  : Total slave endpoints configured
                           on the ATM switch"
    SYNTAX INTEGER {
               caciTotalSpvc(1),
               caciP2pTotalInt(2),
               caciTotalMaster(3),
               caciTotalSlave(4)
              }

-- Node related scalars

-- Total connections

caciP2pTotalConfConns OBJECT-TYPE
         SYNTAX     Unsigned32
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
                "This object specifies the total point to point
                 connections that are configured on this ATM switch."
         ::= { caciGeneric 1 }

caciP2pMaxPossibleConns OBJECT-TYPE
         SYNTAX     Unsigned32
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
                "This object specifies the upper limit of the 
                 point to point and point to multipoint 
                 connections that are allowed to be configured
                 on this ATM switch."
         ::= { caciGeneric 2 }

--Total endpoints

caciMaxPossibleEndpoints OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object specifies the upper limit of all the 
         possible endpoints that are allowed to be 
         configured on this ATM switch."
    ::= { caciGeneric 3 }
 
-- Summary of switch endpoints

caciGenericEndpointTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CaciGenericEndpointEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The table contains number of connection per 
         CaciATMEndpointCategory."
    ::= { caciGeneric 4 }

caciGenericEndpointEntry OBJECT-TYPE
    SYNTAX     CaciGenericEndpointEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the table specifying the number 
         of connections for the corresponding 
         CaciATMEndpointCategory."
    INDEX { caciATMEndpointCategory }
    ::= { caciGenericEndpointTable 1 }

CaciGenericEndpointEntry ::=
    SEQUENCE {
        caciATMEndpointCategory   CaciATMEndpointCategory,
        caciTotalEndpoints        Gauge32
    }

caciATMEndpointCategory    OBJECT-TYPE
    SYNTAX     CaciATMEndpointCategory
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Endpoint category corresponding to 
         CaciATMEndpointCategory."
    ::= { caciGenericEndpointEntry 1 }

caciTotalEndpoints    OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of endpoints of 
         caciATMEndpointCategory configured 
         on this ATM switch."
    ::= { caciGenericEndpointEntry 2 }

-- Interface Connections Statistics table

caciConnInfoTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CaciConnInfoEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The Connection Statistics table. 
         This table has the number of connections per interface."
    ::= { caciIfInfo 1 }

caciConnInfoEntry OBJECT-TYPE
    SYNTAX     CaciConnInfoEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the caciConnInfoTable. 
         Each entry in ifTable with ifType 
         values: atm(37), atmLogical(80) or atmVirtual(149) 
         has an associated entry in this table."
    INDEX { ifIndex, caciGeneralConnEPCategory }
    ::= { caciConnInfoTable 1 }

CaciConnInfoEntry ::=
    SEQUENCE {
        caciGeneralConnEPCategory CaciGeneralConnEPCategory,
        caciNumUsedConns          Gauge32
    }

caciGeneralConnEPCategory OBJECT-TYPE
    SYNTAX     CaciGeneralConnEPCategory
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The general connection or endpoint category
         on this ATM switch."
    ::= { caciConnInfoEntry 1 }

caciNumUsedConns OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object specifies the total number of used 
         connections of type caciGeneralConnEPCategory 
         on this interface."
    ::= { caciConnInfoEntry 2 }


-- Summary of total P2p connections 
caciP2pConnTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CaciP2pConnEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The table contains number of connection per 
         CaciP2pConnCategory."
    ::= { caciP2pConns 1}

caciP2pConnEntry OBJECT-TYPE
    SYNTAX     CaciP2pConnEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the table specifying the number 
         of connections for the corresponding CaciP2pConnCategory."
    INDEX { caciP2pConnectionCategory }
    ::= { caciP2pConnTable 1 }

CaciP2pConnEntry ::=
    SEQUENCE {
        caciP2pConnectionCategory   CaciP2pConnCategory,
        caciP2pTotalConns           Gauge32
    }

caciP2pConnectionCategory  OBJECT-TYPE
    SYNTAX     CaciP2pConnCategory
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The connection category."
    ::= { caciP2pConnEntry 1 }

caciP2pTotalConns OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of P2p connections of type 
         CaciP2pConnCategory configured on this ATM switch."
    ::= { caciP2pConnEntry 2 }

-- Summary of total P2p Endpoints

caciP2pEndpointTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CaciP2pEndpointEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "The table contains number of endpoints per 
         CaciP2pEndpointCategory."
    ::= { caciP2pEndpoints 1}

caciP2pEndpointEntry OBJECT-TYPE
    SYNTAX     CaciP2pEndpointEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the table specifying the number 
         of endpoints for the corresponding 
         CaciP2pEndpointCategory."
    INDEX { caciP2pEndptCategory }
    ::= { caciP2pEndpointTable 1 }

CaciP2pEndpointEntry ::=
    SEQUENCE {
        caciP2pEndptCategory      CaciP2pEndpointCategory,
        caciP2pTotalConfEndpoints Gauge32
    }

caciP2pEndptCategory OBJECT-TYPE
    SYNTAX     CaciP2pEndpointCategory
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The point to point endpoint category."
    ::= { caciP2pEndpointEntry 1 }

caciP2pTotalConfEndpoints OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of total P2p enpoints of type 
         CaciP2pEndpointCategory configured on this ATM switch."
    ::= { caciP2pEndpointEntry 2 }

-- Summary of Total Active SVC/SPVC P2p intermediate endpoints

caciP2pIntEndpointTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CaciP2pIntEndpointEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The table contains number of endpoints per 
         CaciP2pIntEndpointCategory."
    ::= { caciP2pIntEndpoints 1}

caciP2pIntEndpointEntry OBJECT-TYPE
    SYNTAX     CaciP2pIntEndpointEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the table specifying the number 
         of endpoints for the corresponding 
         CaciP2pIntEndpointCategory."
    INDEX { caciP2pIntEndptCategory }
    ::= { caciP2pIntEndpointTable 1 }

CaciP2pIntEndpointEntry ::=
    SEQUENCE {
        caciP2pIntEndptCategory   CaciP2pIntEndpointCategory,
        caciP2pTotalIntEndpoints  Gauge32
    }

caciP2pIntEndptCategory    OBJECT-TYPE
    SYNTAX     CaciP2pIntEndpointCategory
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The point to point intermediate endpoint category."
    ::= { caciP2pIntEndpointEntry 1 }

caciP2pTotalIntEndpoints   OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of P2p intermediate enpoints of type 
         CaciP2pIntEndpointCategory present on this ATM switch."
    ::= { caciP2pIntEndpointEntry 2 }

-- Summary of point to multipoint connections

caciP2mpConnTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF CaciP2mpConnEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The table contains number of connection per 
         CaciP2mpConnCategory."
    ::= { caciP2mpConns 1 }

caciP2mpConnEntry OBJECT-TYPE
    SYNTAX     CaciP2mpConnEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the table specifying the number 
         of connections for the corresponding 
         CaciP2mpConnCategory."
    INDEX { caciP2mpConnectionCategory }
    ::= { caciP2mpConnTable 1 }

CaciP2mpConnEntry ::=
    SEQUENCE {
        caciP2mpConnectionCategory   CaciP2mpConnCategory,
        caciP2mpTotalConfConns       Gauge32
    }

caciP2mpConnectionCategory OBJECT-TYPE
    SYNTAX     CaciP2mpConnCategory
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The point to multi point connection category."
    ::= { caciP2mpConnEntry 1 }

caciP2mpTotalConfConns OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of P2mp connections of type 
         CaciP2mpConnCategory configured on this ATM switch."
    ::= { caciP2mpConnEntry 2 }


-- Notifications
-- There are no notifications for this module

-- conformance information

ciscoAtmConnInfoMIBConformance OBJECT IDENTIFIER ::= 
                               { ciscoAtmConnInfoMIB 2 }
ciscoAtmConnInfoMIBCompliances OBJECT IDENTIFIER ::=
                               { ciscoAtmConnInfoMIBConformance 1 }
ciscoAtmConnInfoMIBGroups      OBJECT IDENTIFIER ::=
                               { ciscoAtmConnInfoMIBConformance 2 } 

ciscoAtmConnInfoMIBCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
       "The Compliance statement for ciscoAtm management group."
        MODULE -- this module
        MANDATORY-GROUPS { ciscoConnInfoConfMIBGroup,
                           ciscoTotalConnsMIBGroup,
                           ciscoTotalEndpointsMIBGroup
                         }
        GROUP ciscoP2pConnsMIBGroup
        DESCRIPTION
            "Required if P2p connections are supported"

        GROUP ciscoP2pEndpointsMIBGroup
        DESCRIPTION
            "Required if P2p connections are supported"

        GROUP ciscoP2pIntEndpointsMIBGroup
        DESCRIPTION
            "Required if P2p connections are supported"

        GROUP ciscoP2mpConnsMIBGroup
        DESCRIPTION
            "Required if P2mp connections are supported"

   ::= { ciscoAtmConnInfoMIBCompliances 1 }

-- units of conformance
ciscoConnInfoConfMIBGroup  OBJECT-GROUP
   OBJECTS {
            caciNumUsedConns
          }
        STATUS current
        DESCRIPTION
            "Objects used for representing connection 
             statistical details about an interface."
        ::= { ciscoAtmConnInfoMIBGroups 1 }

ciscoP2pConnsMIBGroup OBJECT-GROUP
    OBJECTS {
             caciP2pTotalConns
            }
    STATUS current
    DESCRIPTION
        "Objects used for representing the point to point 
         connections of a particular CaP2pConnCategory."
    ::= { ciscoAtmConnInfoMIBGroups 2 }

ciscoP2pEndpointsMIBGroup OBJECT-GROUP
    OBJECTS {
             caciP2pTotalConfEndpoints
            }
    STATUS current
    DESCRIPTION
        "Objects used for representing the point to point 
         endpoints of a particular CaP2pEndpointCategory."
    ::= { ciscoAtmConnInfoMIBGroups 3 }

ciscoP2pIntEndpointsMIBGroup OBJECT-GROUP
    OBJECTS {
             caciP2pTotalIntEndpoints
            }
    STATUS current
    DESCRIPTION
        "Objects used for representing the point to point 
         intermediate endpoints of a particular 
         CaP2pIntEndpointCategory."
    ::= { ciscoAtmConnInfoMIBGroups 4 }

ciscoP2mpConnsMIBGroup OBJECT-GROUP
    OBJECTS {
             caciP2mpTotalConfConns
            }
    STATUS current
    DESCRIPTION
        "Objects used for representing the point to multi point 
         connections of a particular CaP2mpConnCategory."
    ::= { ciscoAtmConnInfoMIBGroups 5 }

ciscoTotalConnsMIBGroup OBJECT-GROUP
    OBJECTS {
             caciP2pTotalConfConns,
             caciP2pMaxPossibleConns
            }
    STATUS current
    DESCRIPTION
        "Objects used for representing the total connections
         on the ATM switch."
    ::= { ciscoAtmConnInfoMIBGroups 6 }

ciscoTotalEndpointsMIBGroup OBJECT-GROUP
    OBJECTS {
             caciMaxPossibleEndpoints,
             caciTotalEndpoints
            }
    STATUS current
    DESCRIPTION
        "Objects used for representing the total endpoints 
         on the ATM switch."
    ::= { ciscoAtmConnInfoMIBGroups 7 }

END