CISCO-ATM-SWITCH-FR-IWF-MIB device MIB details by Cisco

CISCO-ATM-SWITCH-FR-IWF-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-ATM-SWITCH-FR-IWF-MIB.
Vendor:	Cisco
Mib:	CISCO-ATM-SWITCH-FR-IWF-MIB [download] [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-ATM-SWITCH-FR-IWF-MIB
--
-- Sept 1998, Vasmi Abidi
--
-- Copyright (c) 1998, 1999, 2001 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************


CISCO-ATM-SWITCH-FR-IWF-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, 
    Integer32, Counter32              		  FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, RowStatus, TimeStamp,
        TruthValue                                FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP               FROM SNMPv2-CONF
    ciscoMgmt                                     FROM CISCO-SMI
    Unsigned32                                    FROM CISCO-TC
    AtmTrafficDescrParamIndex                     FROM ATM-MIB
    ifIndex, InterfaceIndex                       FROM IF-MIB;


ciscoAtmSwitchFrIwfMIB MODULE-IDENTITY
    LAST-UPDATED "200105200000Z"
    ORGANIZATION "Cisco Systems"
    CONTACT-INFO "
                  Cisco Systems, Inc.
                  170 West Tasman Drive,
                  San Jose CA 95134-1706.
                  Phone: +1 408 526 5260
                  Email: cs-atm@cisco.com"
    DESCRIPTION
            "A MIB module for managing Frame Relay to ATM interworking
            connections, and Frame Relay to Frame Relay switched
            connections via an ATM switching fabric, on a Cisco ATM 
            switch."

    REVISION        "200105200000Z"
    DESCRIPTION
            "Added objects casfVcSignalStandardCalledIe,
            casfConfIfCledSpvcDeModeDef, 
            casfConfIfCledSpvcClpModeDef."

    REVISION        "200002290000Z"
    DESCRIPTION
            "New UPC values of 'tag' and 'drop' were added for IDSL 
            support."

    REVISION        "9807090000Z"
    DESCRIPTION
            "Initial version."
    ::= { ciscoMgmt 112 } 


ciscoAtmSwitchFrIwfMIBObjects  OBJECT IDENTIFIER ::= 
	{ ciscoAtmSwitchFrIwfMIB 1 }

casfFrTraffic      OBJECT IDENTIFIER ::= 
	{ ciscoAtmSwitchFrIwfMIBObjects 1 }

casfFrVC           OBJECT IDENTIFIER ::= 
	{ ciscoAtmSwitchFrIwfMIBObjects 2 }

casfFrInterface    OBJECT IDENTIFIER ::= 
	{ ciscoAtmSwitchFrIwfMIBObjects 3 }

casfFrCounts       OBJECT IDENTIFIER ::= 
	{ ciscoAtmSwitchFrIwfMIBObjects 4 }

casfMapping       OBJECT IDENTIFIER ::= 
	{ ciscoAtmSwitchFrIwfMIBObjects 5 }

-- Textual Conventions

CasfTrafficDescrRow ::=	TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "Identifies an index into the casfTrafficDescrTable. The
             value 0 signifies that no row has been identified." 
    SYNTAX     Unsigned32 (1..2147483647) 


DlciValue ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "A numerical value identifying a Data Link Connection
            Identifier (DLCI) for a Frame Relay connection. The valid
            range of values depends on the format of the address field
            used, as described in ITU Recommendation Q.922. When a
            2-octet address field is used, the value ranges from 0 to
            1023."
    REFERENCE
	    "ITU Recommendation Q.922, ISDN Data Link Layer
            Specification For Frame Mode Bearer Services."   		
    SYNTAX     Integer32 (0..4194303)

ConnectionKind ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "The kind of connection, distinguished by the use of call
             control."
    SYNTAX     INTEGER {
			pvc(1),
			svcIncoming(2),
			svcOutgoing(3),
                        spvcInitiator(4),
                        spvcTarget(5)
                        }

-- Copied from ATM-TC-MIB draft
AtmAddr ::= TEXTUAL-CONVENTION
	DISPLAY-HINT "1x"
        STATUS  current
        DESCRIPTION
                "An ATM address. The semantics are implied by the
                length. The address types are: - no address (0 octets)
                - E.164 (8 octets) - NSAP (20 octets) In addition,
                when subaddresses are used the AtmAddr may represent
                the concatenation of address and subaddress. The
                associated address types are: - E.164, E.164 (16
                octets) - E.164, NSAP (28 octets) - NSAP, NSAP (40
                octets) Address lengths other than defined in this
                definition imply address types defined elsewhere.
                Note: The E.164 address is encoded in BCD format."
         SYNTAX   OCTET STRING (SIZE(0..40))


-- Modeling a Frame Relay to ATM interworking connection on an ATM switch:
--
--
--            +___________________________+
--            |	ATM SWITCH                |
--	      |			          |
--	      |			          |
--           F|  P	  Switch Fabric	  |T
--     _______O===O=======================O_______ ATM
--    Frame   |			          |
--    Relay   |			          |
--	      |			          |
--	      +___________________________+
--
--
-- Consider two ports 'F' and 'T' on a switch.
-- Suppose 'F' is a frame relay port, connected to a frame relay network or 
-- DTE, and 'T' is an ATM port that is connected to an ATM network or DTE.
-- In this model, the cross-connect between a Frame Relay leg (i.e. DLCI) on
-- port F and an ATM leg (i.e., VPI/VCI) on port 'T' is represented using 
-- another ATM port 'P' that is internal to the switch.  
-- To create a FR-ATM interworking pvc connection,
--	(1) Create a Frame relay connection leg on port F, using the table
--          casfVcEndptTable.
--          The agent will create a corresponding ATM connection leg on
--          the internal ATM port P. The mapping from the FR leg to the 
--          ATM leg on the internal ATM port is created in the casfFAMapTable.
--          The reverse mapping appears in the casfAFMapTable.
--     (2) Create the ATM connection leg on port T, and the cross-connect 
--         between P and T using the usual ATM MIBS, e.g., the AToM MIB.
-- 
-- To create a FR-ATM interworking soft VC connection, initiated from port F,
--      (1) Create a Frame Relay connection leg on port F, using the
--          casfVcEndptTable, also specify the value of the ATM Address
--          of the soft VC target, and the DLCI value to
--          be used at the target. The agent will initiate a soft VC
--          setup, and will also create a corresponding ATM connection
--          leg on the internal ATM port P. The mapping from the FR
--          leg to the ATM leg on the internal ATM port is created in
--          the casfFAMapTable.  The reverse mapping appears in the
--          casfAFMapTable.
--
--      (2) Soft VC parameters, such as the retry interval, can be set
--          on the internal ATM leg.



 -- Frame Relay Traffic Descriptor Table

 casfTrafficDescrTable OBJECT-TYPE 
	SYNTAX  	SEQUENCE OF CasfTrafficDescrEntry 
        MAX-ACCESS  	not-accessible 
        STATUS  	current 
        DESCRIPTION 
               	"This table contains a set of self-consistent Frame
               	 Relay traffic parameters. It is intended to be used to
               	 create Frame Relay to ATM interworking connections,
               	 hence a ATM traffic service category is also included.

	  	 An entry in this table is associated with an
               	 equivalent entry in the ATM traffic descriptor table
               	 (atmTrafficDescrParamTable); the mapping is given by
               	 the object casfTrafficDescrAtmIndex. The agent will
               	 not permit deletion of the associated
               	 atmTrafficDescrEntry while the Frame Relay Traffic 
                 Descriptor entry exists.

		 When creating an entry in this table, if the value of
	         casfTrafficDescrAtmIndex is specified, the following
	         cases are possible:
		 (a) if no corresponding row exists in
	         atmTrafficDescrParamTable, the agent will create such
	         a row with the given index value.
		 (b) if a corresponding row does exist in
	         atmTrafficDescrParamTable, the agent compares the
	         parameter values in casfTrafficDescrEntry and the
	         corresponding atmTrafficDescrParamEntry. If the two
	         entries are not equivalent, an error is returned, and
	         row creation fails.

		 When creating an entry in this table, if the value of
	         casfTrafficDescrAtmIndex is not specified, the agent
	         will assign a value to this object so that it refers
	         to an equivalent entry in the
	         atmTrafficDescrParamTable. If such an equivalent
	         entry does not already exist, the agent will create
	         one.

		 The agent creates rows in this table for use with
		 signaled connections. These are called 'transient'
		 rows - they disappear when the connection is torn
		 down, and are not saved in non-volatile memory. By
		 convention, transient rows usually use high-numbered
		 index values.

		 Entries can be deleted by setting the row status to
	         destroy(6). The agent denies the request if the row
	         is in use by existing connections."
     	::= { casfFrTraffic 1 }

 casfTrafficDescrEntry OBJECT-TYPE
     	SYNTAX  	CasfTrafficDescrEntry 
     	MAX-ACCESS  	not-accessible
     	STATUS  	current
     	DESCRIPTION
       		"Describes a traffic descriptor that is used by Frame
	      	Relay connections."
     	INDEX { casfTrafficDescrIndex }
     	::= { casfTrafficDescrTable 1 }

 CasfTrafficDescrEntry ::=
     SEQUENCE {
	 casfTrafficDescrIndex
	     CasfTrafficDescrRow,
	 casfTrafficDescrCIR
	     Unsigned32,
	 casfTrafficDescrBc
	     Unsigned32,
	 casfTrafficDescrBe
	     Unsigned32,
         casfTrafficDescrPIR
	     Unsigned32,
         casfTrafficDescrServCategory
             INTEGER,
	 casfTrafficDescrAtmIndex
	     AtmTrafficDescrParamIndex,
         casfTrafficDescrRowStatus
             RowStatus
     }

 casfTrafficDescrIndex OBJECT-TYPE 
	SYNTAX  	CasfTrafficDescrRow 
        MAX-ACCESS  	not-accessible 
        STATUS  	current 
        DESCRIPTION 
                "Uniquely identifies a row in this table."
        	::= { casfTrafficDescrEntry 1 } 

 casfTrafficDescrCIR OBJECT-TYPE 
	SYNTAX  	Unsigned32 
	UNITS   	"bits/sec"
        MAX-ACCESS  	read-create 
        STATUS  	current 
        DESCRIPTION 
                "The value of the Committed Information Rate (CIR) parameter."
        ::= { casfTrafficDescrEntry 2 } 

 casfTrafficDescrBc OBJECT-TYPE 
	SYNTAX  	Unsigned32
	UNITS 		"bits" 
        MAX-ACCESS  	read-create 
        STATUS  	current 
        DESCRIPTION 
                "The value of the Committed Burst Size (Bc) parameter."
        ::= { casfTrafficDescrEntry 3 } 

 casfTrafficDescrBe OBJECT-TYPE 
	SYNTAX  	Unsigned32
	UNITS 		"bits" 
        MAX-ACCESS  	read-create 
        STATUS  	current 
        DESCRIPTION 
                "The value of the Excess Burst Size (Be) parameter."
        ::= { casfTrafficDescrEntry 4 } 

 casfTrafficDescrPIR OBJECT-TYPE 
	SYNTAX  	Unsigned32 
	UNITS 		"bits/sec"
        MAX-ACCESS  	read-create 
        STATUS  	current 
        DESCRIPTION 
                "The value of the Peak Information Rate (PIR) parameter."
        ::= { casfTrafficDescrEntry 5 } 

 casfTrafficDescrServCategory OBJECT-TYPE 
	SYNTAX  	INTEGER {
			 vbrNrt(1), -- non real-time variable bit rate
			 abr(2),    -- available bit rate
 			 ubr(3),    -- unspecified bit rate
			 vbrRt(4)   -- real-time variable bit rate
		        }
        MAX-ACCESS  	read-create 
        STATUS  	current 
        DESCRIPTION 
                "The service category, as defined for ATM."
	REFERENCE
	        "ATM Forum Traffic Management Specification,
                 Version 4.0, af-tm-0056.000, June 1996."
        ::= { casfTrafficDescrEntry 6 } 

 casfTrafficDescrAtmIndex OBJECT-TYPE 
	SYNTAX  	AtmTrafficDescrParamIndex
        MAX-ACCESS  	read-create 
        STATUS  	current 
        DESCRIPTION 
                "The index of the equivalent entry in the
                 atmTrafficDescrParamTable."
        ::= { casfTrafficDescrEntry 7 } 


 casfTrafficDescrRowStatus OBJECT-TYPE 
	SYNTAX  	RowStatus
        MAX-ACCESS  	read-create 
        STATUS  	current 
        DESCRIPTION 
                "Used to create, delete and modify this row.
		 None of the columnar values (other than this one) can be 
		 modified while the row is active."
        ::= { casfTrafficDescrEntry 8 } 


 -- Configuring Connections
 -- Note: Here the term "end-point" does not indicate the termination
 -- of a connection. Rather, we are using the terminology of RFC
 -- 1604. In this context, each PVC segment has two end-points, which
 -- are connected together through the switch. An end-point is
 -- identified by a UNI/NNI logical port index value and a DLCI value.


 casfVcEndptTable OBJECT-TYPE 
	SYNTAX  	SEQUENCE OF CasfVcEndptEntry 
        MAX-ACCESS  	not-accessible 
        STATUS  	current 
        DESCRIPTION 
                "This table contains information about Frame Relay
                 end-points of FR-ATM interworking connections on the
                 switch. When an entry is created in this table, the
                 agent creates a corresponding entry in the
                 atmVclTable of ATM-MIB, to represent the
                 configuration on the internal ATM port. The mapping
                 between an entry in this table, and the corresponding
                 entry in the atmVclTable is shown in the
                 casfFAMapTable and the casfAFMapTable.

		 Entries can be created or deleted in this table by an
	         NMS using the casfVcEndptRowStatus object. 
	
		 To create a PVC connection end-point, the value of
	         casfVcEndptConnKind must be 'pvc'.

		 To create a soft VC initiator end-point, set the value of
	         casfVcEndptConnKind to 'spvcInitiator', and specify
	         the value of casfVcEndptSpvcRemoteAddr and
	         casfVcEndptSpvcRemoteType. 

		 If the value of casfVcEndptSpvcRemoteType is
	         'frameRelay', you must also specify the value of
	         casfVcEndptSpvcRemoteDlci. Activating the conceptual
	         row will then cause the agent to attempt to establish
	         a connection to the remote frame relay interface.

                 If the value of casfVcEndptSpvcRemoteType is 'atm',
	         you must specify the values of
	         casfVcEndptSpvcRemoteVpi and
	         casfVcEndptSpvcRemoteVci. Activating the conceptual row
	         will then cause the agent to attempt to establish a
	         connection to the remote ATM interface.

		 The agent creates an entry in this table when an
	         incoming signaling request causes a soft VC
	         connection to be established with a local frame relay
	         interface as the destination. The value of
	         casfVcEndptConnKind in this case will be
	         'spvcTarget'.  Such entries cannot be modified or
	         deleted by network management. They will be deleted
	         when the connection is removed by signaling."
      	::= { casfFrVC 1 } 


 casfVcEndptEntry OBJECT-TYPE
     	SYNTAX  	CasfVcEndptEntry
     	MAX-ACCESS  	not-accessible
     	STATUS  	current
     	DESCRIPTION
        	"Models a bidirectional Frame Relay VC end-point. The
              	ifIndex identifies an ifTable entry for a Frame Relay 
	      	interface on this device."
     	INDEX { ifIndex, casfVcEndptDlci  }
     	::= { casfVcEndptTable 1 }

 CasfVcEndptEntry ::=
     SEQUENCE {
	 casfVcEndptDlci
	     DlciValue,
	 casfVcEndptRxTrafficDescrRow
	     CasfTrafficDescrRow,
	 casfVcEndptTxTrafficDescrRow
	     CasfTrafficDescrRow,
	 casfVcEndptRxNegTrafficDescrRow
	     CasfTrafficDescrRow,
	 casfVcEndptTxNegTrafficDescrRow
	     CasfTrafficDescrRow,
 	 casfVcEndptConnKind
	     ConnectionKind,
	 casfVcEndptIwfType
	     INTEGER,
	 casfVcEndptClpMode
	     INTEGER,
	 casfVcEndptDeMode
	     INTEGER,
	 casfVcEndptEfciMode
	     INTEGER,
	 casfVcEndptUpcMode
	     INTEGER,
 	 casfVcEndptSpvcRemoteAddr
	     AtmAddr,
 	 casfVcEndptSpvcRemoteType
	     INTEGER,
 	 casfVcEndptSpvcRemoteDlci
	     DlciValue,
 	 casfVcEndptSpvcRemoteVpi
	     INTEGER,
 	 casfVcEndptSpvcRemoteVci
	     INTEGER,
         casfVcEndptCreationTime
	     TimeStamp,
	 casfVcEndptRcvdSigStatus
	     INTEGER,
         casfVcEndptRowStatus
             RowStatus,
         casfVcSignalStandardCalledIe
	     TruthValue
     }

 casfVcEndptDlci OBJECT-TYPE 
 	SYNTAX  	DlciValue
 	MAX-ACCESS  	not-accessible 
 	STATUS  	current 
 	DESCRIPTION 
         	"The value of the Data Link Connection Identifier (DLCI)
           	which identifies this connection end-point."
 	::= { casfVcEndptEntry 1 } 

 casfVcEndptRxTrafficDescrRow OBJECT-TYPE 
 	SYNTAX  	CasfTrafficDescrRow
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
	         "Identifies the entry in the casfTrafficDescrTable
	         which applies to the receive direction at this
	         connection end-point.

		 For connections that negotiate traffic parameters
	         through signaling (e.g. ABR connections), this object
	         points to the desired traffic parameters, while the
	         object casfVcEndptRxNegTrafficDescrRow points to the
	         negotiated traffic parameters, for the receive direction."
 	::= { casfVcEndptEntry 2 } 


 casfVcEndptTxTrafficDescrRow OBJECT-TYPE 
 	SYNTAX  	CasfTrafficDescrRow
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"Identifies the entry in the casfTrafficDescrTable
	         which applies to the transmit direction at this
	         connection end-point.

		 For connections that negotiate traffic parameters
	         through signaling (e.g. ABR connections), this object
	         points to the desired traffic parameters, while the
	         object casfVcEndptTxNegTrafficDescrRow points to the
	         negotiated traffic parameter, for the transmit direction."
 	::= { casfVcEndptEntry 3 } 

  casfVcEndptRxNegTrafficDescrRow OBJECT-TYPE 
  	SYNTAX  	CasfTrafficDescrRow
  	MAX-ACCESS  	read-only 
  	STATUS  	current 
  	DESCRIPTION 
          	"Identifies the entry in the casfTrafficDescrTable
	         which contains negotiated traffic parameters applied
	         to the receive direction of this connection
	         end-point.  

		 This object is not instantiated if this
	         is not the calling side of a soft VC, or if there is
	         no traffic negotiation."
  	::= { casfVcEndptEntry 4 } 
 
 
  casfVcEndptTxNegTrafficDescrRow OBJECT-TYPE 
 	SYNTAX  	CasfTrafficDescrRow
  	MAX-ACCESS  	read-only 
  	STATUS  	current 
  	DESCRIPTION 
          	"Identifies the entry in the casfTrafficDescrTable
	         which contains negotiated traffic parameters applied
	         to the transmit direction of this connection
	         endpoint.

	   	 This object is not instantiated if this is not the
	         calling side of a soft VC, or if there is no traffic
	         negotiation."
  	::= { casfVcEndptEntry 5 } 

 casfVcEndptConnKind  OBJECT-TYPE 
 	SYNTAX  	ConnectionKind	
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"The connection kind. The value can be set prior to
         	the row becoming 'active'.

	  	To create a pvc connection endpoint, set this value to
	         pvc(1).

	  	To create a soft VC connection endpoint, set this
	         value to spvcInitiator(4), and specify the value of
	         casfVcEndptSpvcRemoteAddr.

	  	The values svcIncoming(2), svcOutgoing(3), and
	         spvcTarget(5) can not be written."
	DEFVAL { pvc }
 	::= { casfVcEndptEntry 6 } 

 casfVcEndptIwfType  OBJECT-TYPE 
 	SYNTAX  	INTEGER {
		  	network(1), -- as in FRF.5
		  	serviceTransparent(2), -- as in FRF.8
		  	serviceTranslation(3), -- as in FRF.8
			rfc1973(4) -- PPP in Frame Relay
	         	}
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"The type of the interworking function. The value can
         	be set prior to the row becoming 'active'."
 	::= { casfVcEndptEntry 7 } 

 casfVcEndptClpMode  OBJECT-TYPE 
 	SYNTAX  	INTEGER {
		  	clpIfDe(1), -- Mode 1 of FRF.5, FRF.8
   		  	clpIsZero(2), -- Mode 2 of FRF.5, FRF.8
	          	clpIsOne(3)   -- Mode 2 of FRF.5, FRF.8
	         	}
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"Specifies how to map from Discard Eligibility (DE)
	         bit on the Frame Relay side to Congestion Loss
	         Priority (CLP) bit on the ATM side.

	  	 For network interworking, clpIfDe(1) corresponds to
	         Mode 1 as defined in FRF.5, section
	         4.4.1. clpIsZero(2) and clpIsOne(3) correspond to
	         Mode 2 as defined in FRF.5, section 4.4.1.
 
	  	 For service interworking, clpIfDe(1) corresponds to
	         Mode 1 as defined in FRF.8, section
	         4.2.1. clpIsZero(2) and clpIsOne(3) correspond to
	         Mode 2 as defined in FRF.8, section 4.2.1."
 	::= { casfVcEndptEntry 8 } 

 casfVcEndptDeMode  OBJECT-TYPE 
 	SYNTAX  	INTEGER {
		  	deIfClpOrFrsscsDe(1),
		  	deIfFrsscsDe(2),
                  	deIfClp(3),
   		  	deIsZero(4),
	          	deIsOne(5)
	         	}
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"Specifies how to map from Congestion Loss Priority
	         (CLP) bit on the ATM side to Discard Eligibility (DE)
	         bit on the Frame Relay side.

		See the Frame Relay Forum specifications FRF.5 and
		 FRF.8 for definitions of Mode 1 and Mode 2.

	  	For network interworking, the valid values are:
		  deIfClpOrFrsscsDe(1) -- Mode 1 of FRF.5 section 4.4.2
		  deIfFrsscsDe(2) -- Mode 2 of FRF.5 section 4.4.2

	  	For service interworking, the valid values are:
		  deIfClp(3) -- Mode 1 of FRF.8 section 4.2.2
		  deIsZero(4) and deIsOne(5) -- Mode 2 of FRF.8 section 4.2.2
	 	"
 	::= { casfVcEndptEntry 9 } 

 casfVcEndptEfciMode  OBJECT-TYPE 
 	SYNTAX  	INTEGER {
		  	efciIfFecn(1),
   		  	efciIsZero(2)
	         	}
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"Specifies how to map from FECN field in the Frame
	         Relay PDU to the EFCI field in ATM cells, in case of
	         service interworking. This object does not apply to
	         network interworking.

	  	 efciIfFecn(1) and efciIsZero(2) correspond to Mode 1
	         and Mode 2 (as defined in FRF.8, section 4.3.1.1),
	         respectively."
 	::= { casfVcEndptEntry 10 } 

 casfVcEndptUpcMode  OBJECT-TYPE 
 	SYNTAX  	INTEGER {
		  	pass(1),
		  	tagDrop(2),
		  	tag(3),
		  	drop(4)
	         	}
	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"Specifies the action taken by Usage Parameter Control
	         (UPC) at the ingress port."
 	::= { casfVcEndptEntry 11 } 

 casfVcEndptSpvcRemoteAddr  OBJECT-TYPE 
 	SYNTAX  	AtmAddr
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"The ATM address of the remote end of the soft VC.
         	The value can be set prior to the row becoming
         	'active', and if the value of casfVcEndptConnKind is
         	spvcInitiator(4). The agent will return an
         	inconsistentValue error on sets if the value of
         	casfVcEndptConnKind is other than spvcInitiator(4).

	  	If the value of casfVcEndptConnKind spvcTarget(5), this
	        object is initialized by the agent.

	  	This object is instantiated only if the value of
	        casfVcEndptConnKind is spvcInitiator(4) or
	        spvcTarget(5)."
 	::= { casfVcEndptEntry 12 } 


 casfVcEndptSpvcRemoteType  OBJECT-TYPE 
 	SYNTAX   	INTEGER {
			other(1),
			frameRelay(2),
			atm(3)
		  	}
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
	  	"The type of the remote end of the soft VC. 

	   	This object is instantiated only if the value of
         	casfVcEndptConnKind is spvcInitiator(4) or
         	spvcTarget(5). The agent will return an
         	inconsistentValue error on sets if the value of
         	casfVcEndptConnKind is other than spvcInitiator(4) or
         	spvcTarget(5)."
 	::= { casfVcEndptEntry 13 } 

 casfVcEndptSpvcRemoteDlci  OBJECT-TYPE 
 	SYNTAX  	DlciValue
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"The DLCI value to be used at the remote end of the
         	soft VC.  The value can be set prior to the row
         	becoming 'active', and if the value of
         	casfVcEndptConnKind is spvcInitiator(4), and the value
         	of casfVcEndptSpvcRemoteType is frameRelay(2).

	  	The object is instantiated only if the value of
         	casfVcEndptSpvcRemoteType is frameRelay(2). The agent
         	will return an inconsistentValue error on sets if the
         	value of casfVcEndptSpvcRemoteType is other than 
                frameRelay(2)."
 	::= { casfVcEndptEntry 14 } 

 casfVcEndptSpvcRemoteVpi  OBJECT-TYPE 
 	SYNTAX  	INTEGER (0..255)
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"The VPI value to be used at the remote end of the
         	soft VC.  The value can be set prior to the row
         	becoming 'active', and if the value of
         	casfVcEndptConnKind is spvcInitiator(4), and the value
         	of casfVcEndptSpvcRemoteType is atm(3).

	  	The object is instantiated only if the value of
         	casfVcEndptSpvcRemoteType is atm(3). The agent will
         	return an inconsistentValue error on sets if the value
         	of casfVcEndptSpvcRemoteType is other than atm(3)."
 	::= { casfVcEndptEntry 15 } 

 casfVcEndptSpvcRemoteVci  OBJECT-TYPE 
 	SYNTAX  	INTEGER (0..65535)
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"The VCI value to be used at the remote end of the
         	soft VC.  The value can be set prior to the row
         	becoming 'active', and if the value of
         	casfVcEndptConnKind is spvcInitiator(4), and the value
         	of casfVcEndptSpvcRemoteType is atm(3).

	  	The object is instantiated only if the value of
         	casfVcEndptSpvcRemoteType is atm(3). The agent will
         	return an inconsistentValue error on sets if the value
         	of casfVcEndptSpvcRemoteType is other than atm(3)."
 	::= { casfVcEndptEntry 16 } 

 casfVcEndptCreationTime  OBJECT-TYPE 
 	SYNTAX  	TimeStamp
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The time when this row was created."
 	::= { casfVcEndptEntry 17 } 

 casfVcEndptRcvdSigStatus  OBJECT-TYPE 
 	SYNTAX  	INTEGER {
			deleted(1),
			active(2),
			inactive(3),
			none(4)
	       		}
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The value of this object identifies the PVC status
	         received via the local in-channel signaling
	         procedures for this PVC end-point. This object is
	         only pertinent for interfaces that perform the
	         bidirectional procedures. For user-to-network network
	         side procedures, the value of this object should be
	         none(4)."
 	REFERENCE
         	" Q.933 Annex A.
        	This object is a copy of frPVCEndptRcvdSigStatus from RFC1604."
 	::= { casfVcEndptEntry 18 } 


 casfVcEndptRowStatus  OBJECT-TYPE 
 	SYNTAX  	RowStatus
 	MAX-ACCESS  	read-create 
 	STATUS  	current 
 	DESCRIPTION 
         	"Used to create, modify or delete this row."
 	::= { casfVcEndptEntry 19 } 

 casfVcSignalStandardCalledIe  OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
          	"Specifies whether or not to signal the standard (from 
          	the ATM-Forum PNNI Soft PVC Addendum) format of the 
          	Called Soft PVC IE, as opposed to the proprietary 
          	encoding we have used for the network-interworking 
          	case to a frame-relay destination."
 	REFERENCE
         	" ATM Forum specification AF-CS-0127.000 for
         	standard encoding of Soft PVC IE."
	DEFVAL { false }
        ::= { casfVcEndptEntry 20 }

 -- LMI at a Frame Relay Interface

 casfFrLmiTable OBJECT-TYPE
      	SYNTAX   	SEQUENCE OF CasfFrLmiEntry
      	MAX-ACCESS   	not-accessible
      	STATUS   	current
      	DESCRIPTION
          	"This table contains frame relay Local Management
	     	Interface (LMI) parameters and counters.

	     	There is one entry for each frame relay
	     	interface. Entries come and go in this table as frame
	     	relay interfaces are created and deleted in the device." 
      	::= { casfFrInterface 1 }

 casfFrLmiEntry OBJECT-TYPE
      	SYNTAX   	CasfFrLmiEntry
      	MAX-ACCESS   	not-accessible
      	STATUS  	current
      	DESCRIPTION
            	"Frame relay LMI objects for a particular frame relay
	     	interface, which is identified by the ifIndex value in
	     	the INDEX clause."
      	INDEX { ifIndex }
      	::= { casfFrLmiTable 1 }

 CasfFrLmiEntry ::=
 	SEQUENCE {
		casfFrLmiProtocol	INTEGER,
		casfFrLmiType            INTEGER,
		casfFrLmiUserN391        INTEGER,
		casfFrLmiUserN392        INTEGER,
		casfFrLmiUserN393        INTEGER,
		casfFrLmiUserT391        INTEGER,
		casfFrLmiNetN392         INTEGER,
		casfFrLmiNetN393         INTEGER,
		casfFrLmiNetT392         INTEGER,

		casfFrLmiEnquiryIns		Counter32,
		casfFrLmiEnquiryOuts		Counter32,
		casfFrLmiStatusIns		Counter32,
		casfFrLmiStatusOuts		Counter32,
		casfFrLmiStatusTimeouts		Counter32,
		casfFrLmiStatusEnqTimeouts	Counter32
         }

 casfFrLmiProtocol OBJECT-TYPE
	SYNTAX 		INTEGER {
                 	none(1),
                 	lmi(2),
                 	ansiT1617D(3),  -- ANSI T1.617 Annex D
                 	ansiT1617B(4),  -- ANSI T1.617 Annex B
		 	ccittQ933A(5)
             		}
     	MAX-ACCESS   	read-write
        STATUS   	current
        DESCRIPTION
           	"Identifies the Local In-Channel Signaling Protocol
                 that is used for this frame relay port."
       	::= { casfFrLmiEntry 1 }

 casfFrLmiType OBJECT-TYPE
	SYNTAX 		INTEGER {
			dte(1),
			dce(2),
			nni(3)
			}
	MAX-ACCESS 	read-write
	STATUS		current
	DESCRIPTION
		"Identifies the Local In-Channel Signaling Procedure
		that is used for this frame relay port. A dte performs
		only user-side procedures. A dce performs only
		network-side procedures. An nni performs bidirectional
		procedures."
	::= { casfFrLmiEntry 2 }

 casfFrLmiUserN391 OBJECT-TYPE
	SYNTAX   	INTEGER (1..255)
        MAX-ACCESS   	read-write
        STATUS   	current
        DESCRIPTION
                "Number of status enquiry intervals  that  pass
                before  issuance  of a full status enquiry mes-
                sage."
        REFERENCE
               "Draft American National  Standard  T1.617-1991,
               Section D.7 Counter N391."
        DEFVAL { 6 }
        ::= { casfFrLmiEntry 3 }


 casfFrLmiUserN392 OBJECT-TYPE
	SYNTAX   	INTEGER (1..10)
        MAX-ACCESS   	read-write
        STATUS   	current
        DESCRIPTION
           	"The maximum number of unanswered Status Enquiries the
          	device shall accept before declaring the interface
          	down."
      	REFERENCE
               "Draft American National  Standard  T1.617-1991,
               Section D.5.1 Counter N392."
      	DEFVAL { 3 }
      	::= { casfFrLmiEntry 4 }

 casfFrLmiUserN393 OBJECT-TYPE
   	SYNTAX   	INTEGER (1..10)
        MAX-ACCESS   	read-write
        STATUS   	current
        DESCRIPTION
          	"The number of status polling intervals over which the
          	error threshold is counted.  For example, if within
          	N393 number of events the device receives N392 number
          	of errors, the interface is marked as down."
     	REFERENCE
               "Draft American National  Standard  T1.617-1991,
               Section D.5.2 Counter N393."
       	DEFVAL { 4 }
      	::= { casfFrLmiEntry 5 }


 casfFrLmiUserT391 OBJECT-TYPE
     	SYNTAX   	INTEGER (5..30)
        UNITS    	"seconds" 
        MAX-ACCESS   	read-write
        STATUS  	current
        DESCRIPTION
          	"The number of seconds between successive status
          	enquiry messages."
     	REFERENCE
               "Draft American National  Standard  T1.617-1991,
               Section D.7 Timer T391."
        DEFVAL { 10 }
        ::= { casfFrLmiEntry 6 }

 casfFrLmiNetN392 OBJECT-TYPE
    	SYNTAX   	INTEGER (1..10)
        MAX-ACCESS   	read-write
        STATUS  	current
        DESCRIPTION
        	"The value of the network-side  error threshold
		for this frame relay port."
       	REFERENCE
               "Draft American National  Standard  T1.617-1991,
               Section D.7 Timer N392."
      	DEFVAL { 3 }
        	::= { casfFrLmiEntry 7 }

 casfFrLmiNetN393 OBJECT-TYPE
    	SYNTAX   	INTEGER (0..10)
        MAX-ACCESS   	read-write
        STATUS  	current
        DESCRIPTION
         	"The value of the network-side monitored events count
         	for this frame relay port. If, within N393 number of
         	events, the network-side receives N392 number of
         	errors, the interface is marked as down."
      	REFERENCE
               "Draft American National  Standard  T1.617-1991,
               Section D.7 Timer N393."
        DEFVAL { 3 }
        ::= { casfFrLmiEntry 8 }

 casfFrLmiNetT392 OBJECT-TYPE
     	SYNTAX   	INTEGER (5..30)
	UNITS    	"seconds"
        MAX-ACCESS   	read-write
        STATUS  	current
        DESCRIPTION
        	"The value of the network-side  polling verification
		timer for this frame relay port."
       	REFERENCE
               "Draft American National  Standard  T1.617-1991,
               Section D.7 Timer T392."
        DEFVAL { 15 }
        ::= { casfFrLmiEntry 9 }


 casfFrLmiEnquiryIns OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"messages"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of Status Enquiry messages received."
	::= { casfFrLmiEntry 10 }

 casfFrLmiEnquiryOuts OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"messages"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of Status Enquiry messages sent."
	::= { casfFrLmiEntry 11 }

 casfFrLmiStatusIns OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"messages"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of Status messages received."
	::= { casfFrLmiEntry 12 }

 casfFrLmiStatusOuts OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"messages"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of Status messages sent."
	::= { casfFrLmiEntry 13 }

 casfFrLmiStatusTimeouts OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of times when timeout occurred on waiting
		for Status message"
	::= { casfFrLmiEntry 14 }

 casfFrLmiStatusEnqTimeouts OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of times when timeout occurred on waiting
		for Status Enquiry message"
	::= { casfFrLmiEntry 15 }



 -- Configuration at a Frame Relay interface

 casfConfIfTable OBJECT-TYPE 
	SYNTAX  	SEQUENCE OF CasfConfIfEntry 
        MAX-ACCESS  	not-accessible 
        STATUS  	current 
        DESCRIPTION 
        	"Contains an entry for each Frame Relay interface that
	         supports FR-ATM interworking connections. An entry
	         contains interworking related parameters for the interface."
      	::= { casfFrInterface 2 } 


 casfConfIfEntry OBJECT-TYPE
     	SYNTAX  	CasfConfIfEntry
     	MAX-ACCESS  	not-accessible
     	STATUS  	current
     	DESCRIPTION
         	"Configuration parameters for interworking at a 
	      	Frame Relay interface."
     	INDEX { ifIndex }
     	::= { casfConfIfTable 1 }

 CasfConfIfEntry ::=
   	SEQUENCE {
	 	casfConfIfAtmAddress    AtmAddr,
	 	casfConfIfUpcIntent	INTEGER,
	 	casfConfIfBcDefault	Integer32,
	 	casfConfIfCledSpvcDeModeDef INTEGER,
	 	casfConfIfCledSpvcClpModeDef INTEGER
     	}

 casfConfIfAtmAddress  OBJECT-TYPE 
 	SYNTAX  	AtmAddr
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The ATM Address that identifies this interface. This
	         address can be used to setup soft VC's to this
	         interface over an ATM network."
 	::= { casfConfIfEntry 1 } 

 casfConfIfUpcIntent  OBJECT-TYPE
        SYNTAX  	INTEGER {
                  	pass(1),
                  	tagDrop(2),
                  	tag(3),
                  	drop(4)
                 	}
        MAX-ACCESS  	read-write
        STATUS  	current
        DESCRIPTION
         	"Specifies the default Usage Parameter Control (UPC)
	         action to use at this interface for connections that
	         do not explicitly specify a UPC action."
 	::= { casfConfIfEntry 2 }

 casfConfIfBcDefault  OBJECT-TYPE
        SYNTAX  	Integer32 (0..32768)
        UNITS 		"bits"
        MAX-ACCESS  	read-write
        STATUS  	current
        DESCRIPTION
         	"Specifies the default Committed Burst Size (Bc) value
	         to use at this interface for connections that do not
	         explicitly specify the value of Bc."
 	::= { casfConfIfEntry 3 }

 casfConfIfCledSpvcDeModeDef  OBJECT-TYPE
        SYNTAX          INTEGER {
                         deIfClpOrFrsscsDe(1),
                         deIfFrsscsDe(2)
                        }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          	"Specifies the default mapping from Congestion Loss 
          	Priority (CLP) bit on the ATM side to Discard 
          	Eligibility (DE) bit on the Frame Relay side. This 
          	is used when receiving a soft PVC Setup using the 
          	standard encoding of the called Soft PVC IE. 
          	Otherwise a proprietary encoding provides this 
          	information."
 	REFERENCE
         	" ATM Forum specification AF-CS-0127.000 for
         	standard encoding of Soft PVC IE."
        DEFVAL { deIfClpOrFrsscsDe }
        ::= { casfConfIfEntry 4 }

 casfConfIfCledSpvcClpModeDef  OBJECT-TYPE
        SYNTAX          INTEGER {
                        clpIfDe(1), -- Mode 1 of FRF.5, FRF.8
                        clpIfIsZero(2), -- Mode 2 of FRF.5, FRF.8
                        clpIfIsOne(3)   -- Mode 2 of FRF.5, FRF.8
                        }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          	"Specifies the default mapping from Discard Eligibility 
          	(DE) bit on the Frame Relay side to Congestion Loss 
          	Priority (CLP) bit on the ATM side.This is used when 
          	receiving a soft PVC Setup using the standard encoding 
          	of the called Soft PVC IE. Otherwise a proprietary 
          	encoding provides this information."
 	REFERENCE
         	" ATM Forum specification AF-CS-0127.000 for
         	standard encoding of Soft PVC IE."
        DEFVAL { clpIfDe }
        ::= { casfConfIfEntry 5 }


 -- Per-connection Counters at a Frame Relay end-point


 casfVcCountTable OBJECT-TYPE
      	SYNTAX   	SEQUENCE OF CasfVcCountEntry
        MAX-ACCESS   	not-accessible
        STATUS   	current
        DESCRIPTION
        	"A table containing counters at Frame Relay connection
		 end-points. Entries in this table are created and
		 deleted whenever corresponding entries in the
		 casfVcEndptTable are created and deleted."
	::= { casfFrCounts 1 }

 casfVcCountEntry OBJECT-TYPE
	SYNTAX   	CasfVcCountEntry
        MAX-ACCESS   	not-accessible
        STATUS   	current
        DESCRIPTION
        	"Counters at a Frame Relay connection end-point, which
                 is identified by the ifIndex of the Frame Relay
                 interface and the DLCI number."
      	INDEX { ifIndex, casfVcEndptDlci }
        ::= { casfVcCountTable 1 }


 CasfVcCountEntry ::=
 	SEQUENCE {
                casfVcCountReceivedFrames	Counter32,
                casfVcCountReceivedOctets	Counter32,
        	casfVcCountReceivedFECNs	Counter32,
                casfVcCountReceivedBECNs	Counter32,
        	casfVcCountReceivedDEs		Counter32,
	        casfVcCountInDiscards		Counter32,
	        casfVcCountOutDiscards		Counter32,
                casfVcCountSentFrames		Counter32,
                casfVcCountSentOctets		Counter32,
        	casfVcCountSentFECNs		Counter32,
        	casfVcCountSentBECNs		Counter32,
        	casfVcCountSentDEs		Counter32,
        	casfVcCountTaggedFECNs		Counter32,
        	casfVcCountTaggedBECNs		Counter32,
        	casfVcCountTaggedDEs		Counter32
         }
 
 casfVcCountReceivedFrames OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames received."
	::= { casfVcCountEntry 1 }

 casfVcCountReceivedOctets OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"octets"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of octets received. This counter counts octets from
	     	the beginning of the frame relay header field to the
	     	end of user data."
	::= { casfVcCountEntry 2 }


 casfVcCountReceivedFECNs OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames received from the network
                 with the FECN (Forward Explicit Congestion
		Notification) bit set."
	::= { casfVcCountEntry 3 }

 casfVcCountReceivedBECNs OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames received from the network
                 with the BECN (Backward Explicit Network Congestion)
		bit set."
	::= { casfVcCountEntry 4 }

 casfVcCountReceivedDEs OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames received with the Discard
		Eligibility (DE) bit set."
	::= { casfVcCountEntry 5 }

 casfVcCountInDiscards OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames received that were discarded at
                 ingress. Possible reasons are policing, congestion."
	::= { casfVcCountEntry 6 }

 casfVcCountOutDiscards OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames that were to be transmitted but were
		discarded. Possible reasons are policing, lack of buffers."
	::= { casfVcCountEntry 7 }


 casfVcCountSentFrames OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames sent."
	::= { casfVcCountEntry 8 }

 casfVcCountSentOctets OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"octets"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of octets sent. This counter counts octets from
	     	the beginning of the frame relay header field to the
	     	end of user data."
	::= { casfVcCountEntry 9 }

 casfVcCountSentFECNs OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames that were sent with the FECN bit set."
	::= { casfVcCountEntry 10 }

 casfVcCountSentBECNs OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames sent with the BECN bit set."
	::= { casfVcCountEntry 11 }

 casfVcCountSentDEs OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames sent with the DE bit set."
	::= { casfVcCountEntry 12 }


 casfVcCountTaggedFECNs OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames for which the switch set the FECN bit."
	::= { casfVcCountEntry 13 }

 casfVcCountTaggedBECNs OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames for which the switch set the BECN bit."
	::= { casfVcCountEntry 14 }

 casfVcCountTaggedDEs OBJECT-TYPE
	SYNTAX 		Counter32
	UNITS		"frames"
	MAX-ACCESS 	read-only
	STATUS		current
	DESCRIPTION
		"Number of frames for which the switch set the DE bit."
	::= { casfVcCountEntry 15 }


 -- per-connection counters relevant to FR-ATM interworking 

 casfVcIwfCountTable OBJECT-TYPE 
	SYNTAX  	SEQUENCE OF CasfVcIwfCountEntry 
        MAX-ACCESS  	not-accessible 
        STATUS  	current 
        DESCRIPTION 
                "This table contains counters at the Frame Relay
	     	endpoint of FR-ATM interworking connections. There is
	     	an entry in this table corresponding to each entry in
	     	casfVcEndptTable."
              ::= { casfFrCounts 2 } 


 casfVcIwfCountEntry OBJECT-TYPE
     SYNTAX  	CasfVcIwfCountEntry
     MAX-ACCESS not-accessible
     STATUS  	current
     DESCRIPTION
             "A set of counters at the Frame Relay endpoint of a
              FR-ATM interworking connection."
     INDEX { ifIndex, casfVcEndptDlci  }
     ::= { casfVcIwfCountTable 1 }

 CasfVcIwfCountEntry ::=
     SEQUENCE {
	 casfVcIwfCountInUnknownProts 		Counter32,
	 casfVcIwfCountOutUnknownProts     	Counter32,
	 casfVcIwfCountReassemblyTimeouts     	Counter32,
	 casfVcIwfCountLengthErrors	     	Counter32,
	 casfVcIwfCountCrcErrors     		Counter32,
	 casfVcIwfCountTotalDiscardFrames    	Counter32
     }


 casfVcIwfCountInUnknownProts  OBJECT-TYPE 
 	SYNTAX  	Counter32
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"Frames received with unknown protocol.  This event is
	         counted only for connections with service
	         interworking in translation mode. For other types of
	         connections, this count will remain at zero."
 	::= { casfVcIwfCountEntry 1 } 

 casfVcIwfCountOutUnknownProts  OBJECT-TYPE 
 	SYNTAX  	Counter32
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"Outbound frames that were not transmitted because
	         they contained an unknown protocol.  This event is
	         counted only for connections with service
	         interworking in translation mode. For other types of
	         connections, this count will remain at zero."
 	::= { casfVcIwfCountEntry 2 } 

 casfVcIwfCountReassemblyTimeouts  OBJECT-TYPE 
 	SYNTAX  	Counter32
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The number of frames which could not be completely
	         reassembled due to a reassembly timeout, and were
	         thus discarded before being transmitted on this
	         connection."
 	::= { casfVcIwfCountEntry 3 } 

 casfVcIwfCountLengthErrors  OBJECT-TYPE 
 	SYNTAX  	Counter32
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The number of reassembled frames intended to be
	         transmitted on this connection for which the AAL5 PDU
	         trailer length fields did not match the actual PDU
	         length, and were thus discarded."
 	::= { casfVcIwfCountEntry 4 } 

 casfVcIwfCountCrcErrors  OBJECT-TYPE 
 	SYNTAX  	Counter32
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The number of reassembled frames intended to be
	         transmitted on this connection for which the AAL5 PDU
	         had CRC errors, and were thus discarded."
 	::= { casfVcIwfCountEntry 5 } 

 casfVcIwfCountTotalDiscardFrames  OBJECT-TYPE 
 	SYNTAX  	Counter32
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The number of frames intended to be transmitted on
	         this connection that were discarded due to any reason
	         including those described in other objects in this
	         table (e.g., frames that were discarded because
	         insufficient buffer space was available for
	         reassembling the frame)."
 	::= { casfVcIwfCountEntry 6 } 


 -- Mapping from a Frame Relay connection end-point to an ATM VCL

 casfFAMapTable OBJECT-TYPE 
	SYNTAX  	SEQUENCE OF CasfFAMapEntry 
        MAX-ACCESS  	not-accessible 
        STATUS  	current 
        DESCRIPTION 
                "This table provides mapping from a DLCI on a Frame
                 Relay interface to a VPI/VCI on an internal ATM
                 interface."
       	::= { casfMapping 1 } 

 casfFAMapEntry OBJECT-TYPE
     	SYNTAX  	CasfFAMapEntry
     	MAX-ACCESS  	not-accessible
     	STATUS  	current
     	DESCRIPTION
             "Given the ifIndex of a frame relay interface, and a DLCI on
	      that interface, this entry provides the ifIndex and
              VPI/VCI on the corresponding internal atm interface."
     	INDEX { ifIndex, casfFAMapDlci }
     	::= { casfFAMapTable 1 }

 CasfFAMapEntry ::=
     SEQUENCE {
	 casfFAMapDlci	     		DlciValue,
         casfFAMapInternalAtmInterface   InterfaceIndex,
         casfFAMapInternalAtmVpi         INTEGER,
         casfFAMapInternalAtmVci         INTEGER
     }

 casfFAMapDlci OBJECT-TYPE 
 	SYNTAX  	DlciValue
 	MAX-ACCESS  	not-accessible 
 	STATUS  	current 
 	DESCRIPTION 
         	"The DLCI value."
 	::= { casfFAMapEntry 1 } 

 casfFAMapInternalAtmInterface OBJECT-TYPE 
 	SYNTAX  	InterfaceIndex
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The ifIndex of the internal ATM interface to which
	         this DLCI is mapped."
 	::= { casfFAMapEntry 2 } 

 casfFAMapInternalAtmVpi OBJECT-TYPE 
 	SYNTAX  	INTEGER (0..255) 
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The VPI value to which this DLCI is mapped."
 	::= { casfFAMapEntry 3 } 

 casfFAMapInternalAtmVci OBJECT-TYPE 
 	SYNTAX  	INTEGER (0..65535)
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The VCI value to which this DLCI is mapped."
 	::= { casfFAMapEntry 4 } 


 -- Mapping from an ATM VCL to a Frame Relay connection end-point
 
 casfAFMapTable OBJECT-TYPE 
	SYNTAX  	SEQUENCE OF CasfAFMapEntry 
        MAX-ACCESS  	not-accessible 
        STATUS  	current 
        DESCRIPTION 
                "This table provides mapping from an atmVclEntry on an
		 internal ATM internal to a casfVcEndptEntry on a  
		 Frame Relay interface."
        ::= { casfMapping 2 } 

 casfAFMapEntry OBJECT-TYPE
     	SYNTAX  	CasfAFMapEntry
     	MAX-ACCESS  	not-accessible
     	STATUS  	current
     	DESCRIPTION
         	"Given the ifIndex of an internal ATM interface, and
	        VPI/VCI, provides the ifIndex of a Frame Relay
	        interface and DLCI, if such mapping exists.
 
                The value of ifType for an internal ATM interface is
	     	propVirtual(53). For every such interface on the
	     	switch, this table contains an entry for each virtual
	     	channel link (VCL) that maps to a frame relay
	     	connection. Entries in this table come and go as the
	     	corresponding frame relay connections come and go."
     	INDEX { ifIndex, casfAFMapAtmVpi, casfAFMapAtmVci }
     	::= { casfAFMapTable 1 }

 CasfAFMapEntry ::=
     SEQUENCE {
         casfAFMapAtmVpi   	INTEGER,
         casfAFMapAtmVci        INTEGER,
         casfAFMapFrIndex       InterfaceIndex,
	 casfAFMapFrDlci     	DlciValue
     }

 casfAFMapAtmVpi OBJECT-TYPE 
 	SYNTAX  	INTEGER (0..255)
 	MAX-ACCESS  	not-accessible 
 	STATUS  	current 
 	DESCRIPTION 
         	"The VPI value of the Virtual Channel Link (VCL) on
	     	the ATM interface."
 	::= { casfAFMapEntry 1 } 

 casfAFMapAtmVci OBJECT-TYPE 
 	SYNTAX  	INTEGER (0..65535)
 	MAX-ACCESS  	not-accessible 
 	STATUS  	current 
 	DESCRIPTION 
         	"The VCI value of the Virtual Channel Link (VCL) on
	     	the ATM interface."
 	::= { casfAFMapEntry 2 } 

 casfAFMapFrIndex OBJECT-TYPE 
 	SYNTAX  	InterfaceIndex
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The ifIndex of the frame relay interface that this
	         VCL maps to."
 	::= { casfAFMapEntry 3 } 

 casfAFMapFrDlci OBJECT-TYPE 
 	SYNTAX 		DlciValue
 	MAX-ACCESS  	read-only 
 	STATUS  	current 
 	DESCRIPTION 
         	"The DLCI on the frame relay interface that this VCL maps to."
 	::= { casfAFMapEntry 4 } 


ciscoAtmSFrIwfMIBConformance OBJECT IDENTIFIER ::= 
	{ ciscoAtmSwitchFrIwfMIB 3 }
ciscoAtmSFrIwfMIBCompliances OBJECT IDENTIFIER ::= 
	{ ciscoAtmSFrIwfMIBConformance 1 }
ciscoAtmSFrIwfMIBGroups      OBJECT IDENTIFIER ::= 
	{ ciscoAtmSFrIwfMIBConformance 2 }


-- Conformance

ciscoAtmSFrIwfMIBCompliance MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION
                "The compliance statement for entities which implement
                the Cisco Atm Switch FR IWF MIB."
        MODULE        -- this module
                MANDATORY-GROUPS { 
	ciscoAtmSFrIwfConfConnGroup,
	ciscoAtmSFrIwfLmiGroup,
	ciscoAtmSFrIwfConfIfGroup,
	ciscoAtmSFrIwfVcStatsGroup,
	ciscoAtmSFrIwfVcIwStatsGroup,
	ciscoAtmSFrIwfMappingGroup
	}
        ::= { ciscoAtmSFrIwfMIBCompliances 1 }

-- Units of Conformance

ciscoAtmSFrIwfConfConnGroup OBJECT-GROUP
    OBJECTS { 	casfTrafficDescrCIR,
		casfTrafficDescrBc,
	 	casfTrafficDescrBe,
         	casfTrafficDescrPIR,
         	casfTrafficDescrServCategory,
	 	casfTrafficDescrAtmIndex,
         	casfTrafficDescrRowStatus,
	 	casfVcEndptRxTrafficDescrRow,
	 	casfVcEndptTxTrafficDescrRow,
	 	casfVcEndptRxNegTrafficDescrRow,
	 	casfVcEndptTxNegTrafficDescrRow,
 	 	casfVcEndptConnKind,
	 	casfVcEndptIwfType,
	 	casfVcEndptClpMode,
	 	casfVcEndptDeMode,
	 	casfVcEndptEfciMode,
	 	casfVcEndptUpcMode,
         	casfVcEndptCreationTime,
	 	casfVcEndptRcvdSigStatus,
 	 	casfVcEndptSpvcRemoteAddr,
 	 	casfVcEndptSpvcRemoteType,
 	 	casfVcEndptSpvcRemoteDlci,
 	 	casfVcEndptSpvcRemoteVpi,
 	 	casfVcEndptSpvcRemoteVci,
         	casfVcEndptRowStatus,
         	casfVcSignalStandardCalledIe
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which allow configuration of
         FR-ATM connections on an ATM switch."
        ::= { ciscoAtmSFrIwfMIBGroups 1 }

ciscoAtmSFrIwfLmiGroup OBJECT-GROUP
    OBJECTS { 
		casfFrLmiProtocol,
		casfFrLmiType,
		casfFrLmiUserN391,
		casfFrLmiUserN392,
		casfFrLmiUserN393,
		casfFrLmiUserT391,
		casfFrLmiNetN392,
		casfFrLmiNetN393,
		casfFrLmiNetT392,
		casfFrLmiEnquiryIns,
		casfFrLmiEnquiryOuts,
		casfFrLmiStatusIns,
		casfFrLmiStatusOuts,
		casfFrLmiStatusTimeouts,
		casfFrLmiStatusEnqTimeouts
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects for configuring and monitoring LMI
             on an FR interface."
        ::= { ciscoAtmSFrIwfMIBGroups 2 }


ciscoAtmSFrIwfConfIfGroup OBJECT-GROUP
    OBJECTS { 	casfConfIfAtmAddress,
	 	casfConfIfUpcIntent,
	 	casfConfIfBcDefault,
	 	casfConfIfCledSpvcDeModeDef,
	 	casfConfIfCledSpvcClpModeDef
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects which allow configuration of
         interworking related parameters on an FR interface."
        ::= { ciscoAtmSFrIwfMIBGroups 3 }

ciscoAtmSFrIwfVcStatsGroup OBJECT-GROUP
    OBJECTS { 	casfVcCountReceivedFrames,
               	casfVcCountReceivedOctets,
               	casfVcCountReceivedFECNs,
                casfVcCountReceivedBECNs,
                casfVcCountReceivedDEs,
                casfVcCountInDiscards,
                casfVcCountOutDiscards,
		casfVcCountSentFrames,
		casfVcCountSentOctets,
	        casfVcCountSentFECNs,
	        casfVcCountSentBECNs,
	        casfVcCountSentDEs,
	        casfVcCountTaggedFECNs,
	        casfVcCountTaggedBECNs,
	        casfVcCountTaggedDEs
            }
    STATUS  current
    DESCRIPTION
            "A collection of counters at FR VC end-points."
        ::= { ciscoAtmSFrIwfMIBGroups 4 }

ciscoAtmSFrIwfVcIwStatsGroup OBJECT-GROUP
    OBJECTS { 	casfVcIwfCountInUnknownProts,
	 	casfVcIwfCountOutUnknownProts,
	 	casfVcIwfCountReassemblyTimeouts,
	 	casfVcIwfCountLengthErrors,
	 	casfVcIwfCountCrcErrors,
	 	casfVcIwfCountTotalDiscardFrames	
            }
    STATUS  current
    DESCRIPTION
            "A collection of counters related to FR-ATM interworking
             at FR VC end-points."
        ::= { ciscoAtmSFrIwfMIBGroups 5 }

ciscoAtmSFrIwfMappingGroup OBJECT-GROUP
    OBJECTS {	casfFAMapInternalAtmInterface,
         	casfFAMapInternalAtmVpi,
         	casfFAMapInternalAtmVci,
         	casfAFMapFrIndex,
	 	casfAFMapFrDlci
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects that describe the mapping from a
             FR connection end-point to an ATM VCL, and vice versa."
        ::= { ciscoAtmSFrIwfMIBGroups 6 }

END
ActiveXperts Network Monitor 2024

Crumbtrail

CISCO-ATM-SWITCH-FR-IWF-MIB device MIB details by Cisco

CISCO-ATM-SWITCH-FR-IWF-MIB file content
