You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-IDSL-LINE-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-IDSL-LINE-MIB by vendor Cisco

CISCO-IDSL-LINE-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-IDSL-LINE-MIB.


Vendor: Cisco
Mib: CISCO-IDSL-LINE-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- Descriptions of managed objects for ADSL DMT line interfaces.
--
-- September 1999, Patrick Gili
--
-- Copyright (c) 1999,2000 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-IDSL-LINE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    Integer32,
    Counter32,
    Gauge32,
    MODULE-IDENTITY,
    OBJECT-TYPE                         FROM SNMPv2-SMI
    TruthValue,
    VariablePointer,
    TEXTUAL-CONVENTION                  FROM SNMPv2-TC
    MODULE-COMPLIANCE,
    OBJECT-GROUP                        FROM SNMPv2-CONF
    ciscoMgmt                           FROM CISCO-SMI
    ifIndex,
    InterfaceIndex                      FROM IF-MIB
    PerfCurrentCount,
    PerfIntervalCount                   FROM PerfHist-TC-MIB
    SnmpAdminString                     FROM SNMP-FRAMEWORK-MIB
    AdslLineProfileName,
    adslLineConfProfileName             FROM ADSL-LINE-MIB
    ;

ciscoIdslLineMIB MODULE-IDENTITY
   LAST-UPDATED   "200001200036Z" -- January 20, 2000 12:36 AM
   ORGANIZATION   "Cisco Systems, Inc."
   CONTACT-INFO   "Cisco System
                   Customer Service

                   Postal: 170 W Tasman Drive
                   San Jose, CA 95134

                   Tel: +1 800 555-NETS

                   E-mail: cs-dslam@cisco.com"
    DESCRIPTION
        "This MIB module describes IDSL (ISDN Digital Line Subscriber)
        line interfaces.  The structure of this module resembles that
        of the ADSL-LINE-MIB (RFC-2662).  Observe that the tables in
        this module do not necessarily extend the tables defined by the
        ADSL-LINE-MIB.  Currently, only those tables that contain
        configuration information extend the profile tables defined by
        the ADSL-LINE-MIB.  This allows the management client to define
        xDSL configuration profiles that apply across all xDSL modems,
        independent of the technology being utilized by the modem.

        *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***

        ADSL - Asymmetric Digital Subscriber Line.

        ATM - Asynchronous Transfer Mode.
        
        BRITE - Basic Rate Interface Terminal Extender.

        CV - Coding Violation.

        DLC - Data Link Connection.

        DSL - Digital Subscriber Line.

        ES - Error Second.

        IDSL - IDSN Digital Subscriber Loop.

        ITU-C - IDSL Transceiver Unit, Central Office end.

        ITU-R - IDSL Transceiver Unit, Remote terminal end.

        LMI - Link Management Interface.

        LOF - Loss Of Frame.

        LOS - Loss Of Signal.
        
        NT - Network Terminator.

        PPP - Point-to-Point Protocol.
        
        PPPoA - PPP over ATM.

        SES - Severely Errored Second.

        *** DEFINITIONS ***

        CODING VIOLATION
            A coding violation occurs when the incoming signal exhibits
            a CRC anomaly.

        DOWNSTREAM
            The flow of data in the direction from the ITU-C to ITU-R.
                      
        ERRORED SECOND
            A second with one or more coding violations.

        LINE RATE
            The total data rate supported by a line.  Observe that the
            payload rate is equal the line rate for the earliest
            implementations of IDSL.  However, the payload rate maybe
            less than the line rate for future implementations.

        SEVERELY ERRORED SECOND
            A second with 3 or more coding violations.
                          
        UPSTREAM
            The flow of data in the direction from the ATU-R to ATU-C."
    REVISION      "200001200036Z" -- January 20, 2000 12:36 AM
    DESCRIPTION
        "Initial revision of this MIB module."
    ::= { ciscoMgmt 154 }

-- Textual Conventions

IdslPerfTimeElapsed ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "The number of seconds that have elapsed since the beginning of
        the current measurement period.  If, for some reason, such as an
        adjustment in the system's time-of-day clock, the current
        interval exceeds the maximum value, the agent will return the
        maximum value."
    SYNTAX Gauge32

IdslPerfCurrDayCount ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "A counter associated with interval performance measurements in
        a current 1-day (24 hour) measurement interval.

        The value of this counter starts at zero at the beginning of an
        interval and increases when associated events occur, until the
        end of the 1-day interval.  At that time, the agent stores the
        value of the counter in the previous 1-day history interval,
        if available, and resets the value of the counter to zero.

        In the case where the agent has no valid data available for this
        interval, the corresponding object instance is not available.
        In this case, the agent will respond with the appropriate error
        indicating that the instance does not exist; that is,
        'noSuchName' in response to a SNMPv1 get request, and
        'noSuchInstance' in response to a SNMPv2 get request."
    SYNTAX Gauge32

IdslPerfPrevDayCount ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "A counter associated with interval performance measurements
        during the most previous 1-day (24 hour) measurement interval.
        The value of this counter is equal to the current day counter
        at the end of its most recent interval.

        In the case where the agent has no valid data available for this
        interval, the corresponding object instance is not available.
        In this case, the agent will respond with the appropriate error
        indicating that the instance does not exist; that is,
        'noSuchName' in response to a SNMPv1 get request, and
        'noSuchInstance' in response to a SNMPv2 get request."
    SYNTAX Gauge32

-- MIB Object Definitions

ciscoIdslLineMIBObjects OBJECT IDENTIFIER
    ::= { ciscoIdslLineMIB 1 }

-- IDSL Line Table

cIdslLineTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CIdslLineEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains the common attributes describing both ends
        of IDSL lines supported by the system."
    ::= { ciscoIdslLineMIBObjects 1 }

cIdslLineEntry OBJECT-TYPE
    SYNTAX      CIdslLineEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A set of common attributes describing both ends of an IDSL line
        supported by the system.  There exists an entry for each ifEntry
        with an ifType of idsl(154)."
    INDEX       { ifIndex }
    ::= { cIdslLineTable 1 }

CIdslLineEntry ::= SEQUENCE {
    cIdslLineSpecific         VariablePointer,
    cIdslLineConfProfile      AdslLineProfileName,
    cIdslLineAlarmConfProfile AdslLineProfileName
}

cIdslLineSpecific OBJECT-TYPE
    SYNTAX      VariablePointer
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies an object identifier of an instance of
        an object in the MIB.  The implementation determines the
        application of this object.   For example, an implementation
        may use this object to provide a reference to the port-class
        physical entity (see the ENTITY-MIB for further details)
        corresponding to the IDSL line."
    ::= { cIdslLineEntry 1 }

cIdslLineConfProfile OBJECT-TYPE
    SYNTAX      AdslLineProfileName
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the row in the adslLineConfProfileTable
        (see the ADSL-LINE-MIB for further details), which applies for
        this IDSL line interface.

        In the case the implementation utilizes 'dynamic mode' (see
        the ADSL-LINE-MIB for further details), then the value of this
        object defaults to the name of a configuration profile
        designated by the implementation as the default configuration
        profile.

        In the case the implementation utilizes 'static mode', then the
        the value of this object is read-only."
    ::= { cIdslLineEntry 2 }

cIdslLineAlarmConfProfile OBJECT-TYPE
    SYNTAX      AdslLineProfileName
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the row in the
        adslLineAlarmConfProfileTable (see the ADSL-LINE-MIB for further
        details), which applies for this IDSL line interface.

        In the case the implementation utilizes 'dynamic mode' (see
        the ADSL-LINE-MIB for further details), then the value of this
        object defaults to the name of an alarm configuration profile
        designated by the implementation as the default alarm
        configuration profile.

        In the case the implementation utilizes 'static mode', then the
        the value of this object is read-only."
    ::= { cIdslLineEntry 3 }

-- IDSL ITU-C Physical Parameters Table

cIdslItucPhysTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CIdslItucPhysEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains physical-layer parameters for ITU-C class
        devices supported by the system."
    ::= { ciscoIdslLineMIBObjects 2 }

cIdslItucPhysEntry OBJECT-TYPE
    SYNTAX      CIdslItucPhysEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A set of physical-layer parameters for an ITU-C class device
        supported by the system.  There exists an entry for each ifEntry
        with an ifType of idsl(154)."
    INDEX       { ifIndex }
    ::= { cIdslItucPhysTable 1 }

CIdslItucPhysEntry ::= SEQUENCE {
    cIdslItucInvSerialNumber    SnmpAdminString,
    cIdslItucInvVendorId        SnmpAdminString,
    cIdslItucInvVersionNumber   SnmpAdminString,
    cIdslItucStatus             INTEGER
}

cIdslItucInvSerialNumber OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the vendor specific string that
        identifies the vendor ITU-C."
    ::= { cIdslItucPhysEntry 1 }

cIdslItucInvVendorId OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the vendor identifier assigned according
        to ANSI T1.220."
    REFERENCE
        "ANSI T1.220-1991, Coded Representation of the North American
        Telecommunication Industry Manufacturers, Suppliers, and Related
        Service Companies."
    ::= { cIdslItucPhysEntry 2 }

cIdslItucInvVersionNumber OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the vendor specific version number of
        the ITU-C."
    ::= { cIdslItucPhysEntry 3 }

cIdslItucStatus OBJECT-TYPE
    SYNTAX      INTEGER {
        loopDown(1),
        dslSync(2),
        loopUp(3),
        loopUpLmiActive(4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the state of the ITU-C transceiver:
        
        - loopDown
            The IDSL link is down, as a result of a near-end has
            detected a LOS, a LOF, has not exchanged an ACT bit
            with the downstream BRITE/NT1, or similar fault/condition.
            
        - dslSync
            The IDSL link has achieved physical layer activation with
            the first downstream entity (iether a BRITE or the NT1).
        
        - loopUp
            The IDSL link has exchanged the ACT bit with the NT1, but
            LMI signalling is not yet active.  This is the normal 
            operating state for PPP operation.
        
        - loopUpLmiActive
            The IDSL link has exchnaged the ACT bit with the NT1
            and the LMI signalling is active.  This is the normal
            operating state for frame relay operation."
    ::= { cIdslItucPhysEntry 4 }

-- IDSL ITU-R Physical Parameters Table
--    A future revision may use ciscoIdslLineMIBObjects.3 for the
--    purpose of defining the cIdslIturPhysTable, which will contain
--    physical-layer parameters for ITU-R class devices.

-- IDSL ITU-C Channel Parameters Table
--    A future revision may use ciscoIdslLineMIBObjects.4 for the
--    purpose of defining the cIdslItucChanTable, which will contain
--    channel parameters for ITU-C class devices.

-- IDSL ITU-R Channel Parameters Table
--    A future revision may use ciscoIdslLineMIBObjects.5 for the
--    purpose of defining the cIdslIturChanTable, which will contain
--    channel parameters for ITU-R class devices.

-- IDSL ITU-C Performance Data Table

cIdslItucPerfDataTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CIdslItucPerfDataEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains physical-layer statistics for ITU-C class
        devices supported by the system."
    ::= { ciscoIdslLineMIBObjects 6 }

cIdslItucPerfDataEntry OBJECT-TYPE
    SYNTAX      CIdslItucPerfDataEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A set of physical-layer statistics for an ITU-C class device
        supported by the system.  There exists an entry for each ifEntry
        with an ifType of idsl(154)."
    INDEX       { ifIndex }
    ::= { cIdslItucPerfDataTable 1 }

CIdslItucPerfDataEntry ::= SEQUENCE {
    cIdslItucPerfCVs                    Counter32,
    cIdslItucPerfESs                    Counter32,
    cIdslItucPerfSESs                   Counter32,
    cIdslItucPerfHdlcCVs                Counter32,
    cIdslItucPerfHdlcAborts             Counter32,
    cIdslItucPerfHdlcAligns             Counter32,
    cIdslItucPerfHdlcShorts             Counter32,
    cIdslItucPerfHdlcLongs              Counter32,
    cIdslItucPerfValidIntervals         INTEGER,
    cIdslItucPerfInvalidIntervals       INTEGER,
    cIdslItucPerfCurr15MinElapsed       IdslPerfTimeElapsed,
    cIdslItucPerfCurr15MinCVs           PerfCurrentCount,
    cIdslItucPerfCurr15MinESs           PerfCurrentCount,
    cIdslItucPerfCurr15MinSESs          PerfCurrentCount,
    cIdslItucPerfCurr15MinHdlcCVs       PerfCurrentCount,
    cIdslItucPerfCurr15MinHdlcAborts    PerfCurrentCount,
    cIdslItucPerfCurr15MinHdlcAligns    PerfCurrentCount,
    cIdslItucPerfCurr15MinHdlcShorts    PerfCurrentCount,
    cIdslItucPerfCurr15MinHdlcLongs     PerfCurrentCount,
    cIdslItucPerfCurr1DayElapsed        IdslPerfTimeElapsed,
    cIdslItucPerfCurr1DayCVs            IdslPerfCurrDayCount,
    cIdslItucPerfCurr1DayESs            IdslPerfCurrDayCount,
    cIdslItucPerfCurr1DaySESs           IdslPerfCurrDayCount,
    cIdslItucPerfCurr1DayHdlcCVs        IdslPerfCurrDayCount,
    cIdslItucPerfCurr1DayHdlcAborts     IdslPerfCurrDayCount,
    cIdslItucPerfCurr1DayHdlcAligns     IdslPerfCurrDayCount,
    cIdslItucPerfCurr1DayHdlcShorts     IdslPerfCurrDayCount,
    cIdslItucPerfCurr1DayHdlcLongs      IdslPerfCurrDayCount,
    cIdslItucPerfPrev1DayMoniSecs       INTEGER,
    cIdslItucPerfPrev1DayCVs            IdslPerfPrevDayCount,
    cIdslItucPerfPrev1DayESs            IdslPerfPrevDayCount,
    cIdslItucPerfPrev1DaySESs           IdslPerfPrevDayCount,
    cIdslItucPerfPrev1DayHdlcCVs        IdslPerfPrevDayCount,
    cIdslItucPerfPrev1DayHdlcAborts     IdslPerfPrevDayCount,
    cIdslItucPerfPrev1DayHdlcAligns     IdslPerfPrevDayCount,
    cIdslItucPerfPrev1DayHdlcShorts     IdslPerfPrevDayCount,
    cIdslItucPerfPrev1DayHdlcLongs      IdslPerfPrevDayCount
}

cIdslItucPerfCVs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of coding violations
        experienced by the ITU-C since agent reset."
    ::= { cIdslItucPerfDataEntry 1 }

cIdslItucPerfESs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of errored seconds
        experienced by the ITU-C since agent reset."
    ::= { cIdslItucPerfDataEntry 2 }

cIdslItucPerfSESs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of severely errored
        seconds experienced by the ITU-C since agent reset."
    ::= { cIdslItucPerfDataEntry 3 }

cIdslItucPerfHdlcCVs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC coding violations
        experienced by the ITU-C since agent reset."
    ::= { cIdslItucPerfDataEntry 4 }

cIdslItucPerfHdlcAborts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC aborts experienced
        by the ITU-C since agent reset."
    ::= { cIdslItucPerfDataEntry 5 }

cIdslItucPerfHdlcAligns OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC frames received by the
        ITU-C with a non-integral number of octets since agent reset."
    ::= { cIdslItucPerfDataEntry 6 }

cIdslItucPerfHdlcShorts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of short HDLC frames received
        by the ITU-C since agent reset.  A short HDLC frame contains
        less than 5 octets."
    ::= { cIdslItucPerfDataEntry 7 }

cIdslItucPerfHdlcLongs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of long HDLC frames received
        by the ITU-C since agent reset.  A long HDLC frame contains
        more than 1500 octets."
    ::= { cIdslItucPerfDataEntry 8 }

cIdslItucPerfValidIntervals OBJECT-TYPE
    SYNTAX      INTEGER (0..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of previous near-end performance data 15-minute
        intervals for which data was collected.  The value will be <n>
        unless the measurement was (re-)started within the last (<n>*15)
        minutes, in which case the value will be the number of complete
        15-minute intervals for which the agent has at least some data.
        In certain cases (e.g., in the case where the agent is a proxy)
        it is possible that some intervals are unavailable.  In this
        case, this interval is the maximum interval number for which
        data is available."
    ::= { cIdslItucPerfDataEntry 9 }

cIdslItucPerfInvalidIntervals OBJECT-TYPE
    SYNTAX      INTEGER (0..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of near-end performance data 15-minute intervals in
        the range from 0 to cSdslStucPerfValidIntervals for which no
        data is available. This object will typically be zero except in
        cases where the data for some intervals are not available (e.g.,
        in proxy situations)."
    ::= { cIdslItucPerfDataEntry 10 }

cIdslItucPerfCurr15MinElapsed OBJECT-TYPE
    SYNTAX      IdslPerfTimeElapsed
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of seconds that have elapsed since the beginning of
        the current measurement period.  If, for some reason, such as an
        adjustment in the system's time-of-day clock, the current
        interval exceeds the maximum value, the agent will return
        the maximum value."
    ::= { cIdslItucPerfDataEntry 11 }

cIdslItucPerfCurr15MinCVs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of coding violations 
        experienced by the ITU-C in the current 15-minute interval."
    ::= { cIdslItucPerfDataEntry 12 }

cIdslItucPerfCurr15MinESs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of errored seconds
        experienced by the ITU-C in the current 15-minute interval."
    ::= { cIdslItucPerfDataEntry 13 }

cIdslItucPerfCurr15MinSESs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of severely errored seconds
        experienced by the ITU-C in the current 15-minute interval."
    ::= { cIdslItucPerfDataEntry 14 }

cIdslItucPerfCurr15MinHdlcCVs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC coding violations 
        experienced by the ITU-C in the current 15-minute interval."
    ::= { cIdslItucPerfDataEntry 15 }

cIdslItucPerfCurr15MinHdlcAborts OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC aborts experienced
        by the ITU-C in the current 15-minute interval."
    ::= { cIdslItucPerfDataEntry 16 }

cIdslItucPerfCurr15MinHdlcAligns OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC frames received by
        the ITU-C with a non-integral number of octets in the current
        15-minute interval."
    ::= { cIdslItucPerfDataEntry 17 }

cIdslItucPerfCurr15MinHdlcShorts OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of short HDLC frames received
        by the ITU-C since agent in the current 15-minute interval.  A
        short HDLC frame contains less than 5 octets."
    ::= { cIdslItucPerfDataEntry 18 }

cIdslItucPerfCurr15MinHdlcLongs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of long HDLC frames received
        by the ITU-C since agent in the current 15-minute interval.  A
        long HDLC frame contains more than 1500 octets."
    ::= { cIdslItucPerfDataEntry 19 }

cIdslItucPerfCurr1DayElapsed OBJECT-TYPE
    SYNTAX      IdslPerfTimeElapsed
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of seconds that have elapsed since the beginning of
        the current measurement period.  If, for some reason, such as an
        adjustment in the system's time-of-day clock, the current
        interval exceeds the maximum value, the agent will return
        the maximum value."
    ::= { cIdslItucPerfDataEntry 20 }

cIdslItucPerfCurr1DayCVs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of coding violations
        experienced by the ITU-C in the current 1-day interval."
    ::= { cIdslItucPerfDataEntry 21 }

cIdslItucPerfCurr1DayESs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of errored seconds
        experienced by the ITU-C in the current 1-day interval."
    ::= { cIdslItucPerfDataEntry 22 }

cIdslItucPerfCurr1DaySESs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of severely errored seconds
        experienced by the ITU-C in the current 1-day interval."
    ::= { cIdslItucPerfDataEntry 23 }

cIdslItucPerfCurr1DayHdlcCVs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC coding violations 
        experienced by the ITU-C in the current 1-day interval."
    ::= { cIdslItucPerfDataEntry 24 }

cIdslItucPerfCurr1DayHdlcAborts OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC aborts experienced
        by the ITU-C in the current 1-day interval."
    ::= { cIdslItucPerfDataEntry 25 }

cIdslItucPerfCurr1DayHdlcAligns OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC frames received by
        the ITU-C with a non-integral number of octets in the current
        1-day interval."
    ::= { cIdslItucPerfDataEntry 26 }

cIdslItucPerfCurr1DayHdlcShorts OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of short HDLC frames received
        by the ITU-C since agent in the current 1-day interval.  A
        short HDLC frame contains less than 5 octets."
    ::= { cIdslItucPerfDataEntry 27 }

cIdslItucPerfCurr1DayHdlcLongs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of long HDLC frames received
        by the ITU-C since agent in the current 1-day interval.  A
        long HDLC frame contains more than 1500 octets."
    ::= { cIdslItucPerfDataEntry 28 }

cIdslItucPerfPrev1DayMoniSecs OBJECT-TYPE
    SYNTAX      INTEGER (0..86400)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of time in the previous 1-day interval over which
        the performance monitoring information is actually counted.
        This value will be the same as the interval duration except
        in a situation where performance monitoring data could not be
        collected for any reason."
    ::= { cIdslItucPerfDataEntry 29 }

cIdslItucPerfPrev1DayCVs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of coding violations 
        experienced by the ITU-C in the previous 1-day interval."
    ::= { cIdslItucPerfDataEntry 30 }

cIdslItucPerfPrev1DayESs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of errored seconds
        experienced by the ITU-C in the previous 1-day interval."
    ::= { cIdslItucPerfDataEntry 31 }

cIdslItucPerfPrev1DaySESs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of severely errored seconds
        experienced by the ITU-C in the previous 1-day interval."
    ::= { cIdslItucPerfDataEntry 32 }

cIdslItucPerfPrev1DayHdlcCVs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC coding violations 
        experienced by the ITU-C in the previous 1-day interval."
    ::= { cIdslItucPerfDataEntry 33 }

cIdslItucPerfPrev1DayHdlcAborts OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC aborts experienced
        by the ITU-C in the previous 1-day interval."
    ::= { cIdslItucPerfDataEntry 34 }

cIdslItucPerfPrev1DayHdlcAligns OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC frames received by
        the ITU-C with a non-integral number of octets in the previous
        1-day interval."
    ::= { cIdslItucPerfDataEntry 35 }

cIdslItucPerfPrev1DayHdlcShorts OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of long HDLC frames received
        by the ITU-C since agent in the previous 1-day interval.  A
        long HDLC frame contains more than 1500 octets."
    ::= { cIdslItucPerfDataEntry 36 }

cIdslItucPerfPrev1DayHdlcLongs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of long HDLC frames received
        by the ITU-C since agent in the previous 1-day interval.  A
        long HDLC frame contains more than 1500 octets."
    ::= { cIdslItucPerfDataEntry 37 }

-- IDSL ITU-R Performance Data Table

cIdslIturPerfDataTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CIdslIturPerfDataEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains physical-layer statistics for ITU-R class
        devices supported by the system."
    ::= { ciscoIdslLineMIBObjects 7 }

cIdslIturPerfDataEntry OBJECT-TYPE
    SYNTAX      CIdslIturPerfDataEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A set of physical-layer statistics for an ITU-R class device
        supported by the system.  There exists an entry for each ifEntry
        with an ifType of idsl(154)."
    INDEX       { ifIndex }
    ::= { cIdslIturPerfDataTable 1 }

CIdslIturPerfDataEntry ::= SEQUENCE {
    cIdslIturPerfCVs                Counter32,
    cIdslIturPerfESs                Counter32,
    cIdslIturPerfSESs               Counter32,
    cIdslIturPerfValidIntervals     INTEGER,
    cIdslIturPerfInvalidIntervals   INTEGER,
    cIdslIturPerfCurr15MinElapsed   IdslPerfTimeElapsed,
    cIdslIturPerfCurr15MinCVs       PerfCurrentCount,
    cIdslIturPerfCurr15MinESs       PerfCurrentCount,
    cIdslIturPerfCurr15MinSESs      PerfCurrentCount,
    cIdslIturPerfCurr1DayElapsed    IdslPerfTimeElapsed,
    cIdslIturPerfCurr1DayCVs        IdslPerfCurrDayCount,
    cIdslIturPerfCurr1DayESs        IdslPerfCurrDayCount,
    cIdslIturPerfCurr1DaySESs       IdslPerfCurrDayCount,
    cIdslIturPerfPrev1DayMoniSecs   INTEGER,
    cIdslIturPerfPrev1DayCVs        IdslPerfPrevDayCount,
    cIdslIturPerfPrev1DayESs        IdslPerfPrevDayCount,
    cIdslIturPerfPrev1DaySESs       IdslPerfPrevDayCount
}

cIdslIturPerfCVs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of coding violations
        experienced by the ITU-R since agent reset."
    ::= { cIdslIturPerfDataEntry 1 }

cIdslIturPerfESs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of errored seconds
        experienced by the ITU-R since agent reset."
    ::= { cIdslIturPerfDataEntry 2 }

cIdslIturPerfSESs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of severely errored
        seconds experienced by the ITU-R since agent reset."
    ::= { cIdslIturPerfDataEntry 3 }

cIdslIturPerfValidIntervals OBJECT-TYPE
    SYNTAX      INTEGER (0..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of previous near-end performance data 15-minute
        intervals for which data was collected.  The value will be <n>
        unless the measurement was (re-)started within the last (<n>*15)
        minutes, in which case the value will be the number of complete
        15-minute intervals for which the agent has at least some data.
        In certain cases (e.g., in the case where the agent is a proxy)
        it is possible that some intervals are unavailable.  In this
        case, this interval is the maximum interval number for which
        data is available."
    ::= { cIdslIturPerfDataEntry 4 }

cIdslIturPerfInvalidIntervals OBJECT-TYPE
    SYNTAX      INTEGER (0..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of near-end performance data 15-minute intervals in
        the range from 0 to cSdslStucPerfValidIntervals for which no
        data is available. This object will typically be zero except in
        cases where the data for some intervals are not available (e.g.,
        in proxy situations)."
    ::= { cIdslIturPerfDataEntry 5 }

cIdslIturPerfCurr15MinElapsed OBJECT-TYPE
    SYNTAX      IdslPerfTimeElapsed
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of seconds that have elapsed since the beginning of
        the current measurement period.  If, for some reason, such as an
        adjustment in the system's time-of-day clock, the current
        interval exceeds the maximum value, the agent will return
        the maximum value."
    ::= { cIdslIturPerfDataEntry 6 }

cIdslIturPerfCurr15MinCVs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of coding violations 
        experienced by the ITU-R in the current 15-minute interval."
    ::= { cIdslIturPerfDataEntry 7 }

cIdslIturPerfCurr15MinESs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of errored seconds
        experienced by the ITU-R in the current 15-minute interval."
    ::= { cIdslIturPerfDataEntry 8 }

cIdslIturPerfCurr15MinSESs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of severely errored seconds
        experienced by the ITU-R in the current 15-minute interval."
    ::= { cIdslIturPerfDataEntry 9 }

cIdslIturPerfCurr1DayElapsed OBJECT-TYPE
    SYNTAX      IdslPerfTimeElapsed
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of seconds that have elapsed since the beginning of
        the current measurement period.  If, for some reason, such as an
        adjustment in the system's time-of-day clock, the current
        interval exceeds the maximum value, the agent will return
        the maximum value."
    ::= { cIdslIturPerfDataEntry 10 }

cIdslIturPerfCurr1DayCVs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of coding violations
        experienced by the ITU-R in the current 1-day interval."
    ::= { cIdslIturPerfDataEntry 11 }

cIdslIturPerfCurr1DayESs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of errored seconds
        experienced by the ITU-R in the current 1-day interval."
    ::= { cIdslIturPerfDataEntry 12 }

cIdslIturPerfCurr1DaySESs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of severely errored seconds
        experienced by the ITU-R in the current 1-day interval."
    ::= { cIdslIturPerfDataEntry 13 }

cIdslIturPerfPrev1DayMoniSecs OBJECT-TYPE
    SYNTAX      INTEGER (0..86400)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of time in the previous 1-day interval over which
        the performance monitoring information is actually counted.
        This value will be the same as the interval duration except
        in a situation where performance monitoring data could not be
        collected for any reason."
    ::= { cIdslIturPerfDataEntry 14 }

cIdslIturPerfPrev1DayCVs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of coding violations 
        experienced by the ITU-R in the previous 1-day interval."
    ::= { cIdslIturPerfDataEntry 15 }

cIdslIturPerfPrev1DayESs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of errored seconds
        experienced by the ITU-R in the previous 1-day interval."
    ::= { cIdslIturPerfDataEntry 16 }

cIdslIturPerfPrev1DaySESs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of severely errored seconds
        experienced by the ITU-R in the previous 1-day interval."
    ::= { cIdslIturPerfDataEntry 17 }

-- IDSL ITU-C Performance Interval Table

cIdslItucIntervalTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CIdslItucIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains physical-layer statistics intervals for
        ITU-C class devices supported by the system."
    ::= { ciscoIdslLineMIBObjects 8 }

cIdslItucIntervalEntry OBJECT-TYPE
    SYNTAX      CIdslItucIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A 15-miute interval of physical-layer statistics for a ITU-C
        class device supported by the system.  There exists up to 96
        entries for each ifEntry with an ifType of idsl(154)."
    INDEX       { ifIndex, cIdslItucIntervalNumber }
    ::= { cIdslItucIntervalTable 1 }

CIdslItucIntervalEntry ::= SEQUENCE {
    cIdslItucIntervalNumber     INTEGER,
    cIdslItucIntervalValidData  TruthValue,
    cIdslItucIntervalCVs        PerfIntervalCount,
    cIdslItucIntervalESs        PerfIntervalCount,
    cIdslItucIntervalSESs       PerfIntervalCount,
    cIdslItucIntervalHdlcCVs    PerfIntervalCount,
    cIdslItucIntervalHdlcAborts PerfIntervalCount,
    cIdslItucIntervalHdlcAligns PerfIntervalCount,
    cIdslItucIntervalHdlcShorts PerfIntervalCount,
    cIdslItucIntervalHdlcLongs  PerfIntervalCount
}

cIdslItucIntervalNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The interval in which the statistics were collected, where the
        value of 1 represents the most recent interval, and the value of
        96 represents the interval collected 24 hours ago.  Intervals
        2..96 are optional."
    ::= { cIdslItucIntervalEntry 1 }

cIdslItucIntervalValidData OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies whether the data for this interval
        is valid."
    ::= { cIdslItucIntervalEntry 2 }

cIdslItucIntervalCVs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of coding violations 
        experienced by the ITU-C in the interval."
    ::= { cIdslItucIntervalEntry 3 }

cIdslItucIntervalESs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of errored seconds
        experienced by the ITU-C in the interval."
    ::= { cIdslItucIntervalEntry 4 }

cIdslItucIntervalSESs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of severely errored seconds
        experienced by the ITU-C in the interval."
    ::= { cIdslItucIntervalEntry 5 }

cIdslItucIntervalHdlcCVs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC coding violations 
        experienced by the ITU-C in the interval."
    ::= { cIdslItucIntervalEntry 6 }

cIdslItucIntervalHdlcAborts OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC aborts experienced
        by the ITU-C in the interval."
    ::= { cIdslItucIntervalEntry 7 }

cIdslItucIntervalHdlcAligns OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of HDLC frames received by
        the ITU-C with a non-integral number of octets in the interval."
    ::= { cIdslItucIntervalEntry 8 }

cIdslItucIntervalHdlcShorts OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of short HDLC frames received
        by the ITU-C since agent in the interval.  A short HDLC frame
        contains less than 5 octets."
    ::= { cIdslItucIntervalEntry 9 }

cIdslItucIntervalHdlcLongs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of long HDLC frames received
        by the ITU-C since agent in the interval.  A long HDLC frame
        contains more than 1500 octets."
    ::= { cIdslItucIntervalEntry 10 }

-- IDSL ITU-R Performance Interval Table

cIdslIturIntervalTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CIdslIturIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains physical-layer statistics intervals for
        ITU-R class devices supported by the system."
    ::= { ciscoIdslLineMIBObjects 9 }

cIdslIturIntervalEntry OBJECT-TYPE
    SYNTAX      CIdslIturIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A 15-miute interval of physical-layer statistics for a ITU-R
        class device supported by the system.  There exists up to 96
        entries for each ifEntry with an ifType of idsl(154)."
    INDEX       { ifIndex, cIdslIturIntervalNumber }
    ::= { cIdslIturIntervalTable 1 }

CIdslIturIntervalEntry ::= SEQUENCE {
    cIdslIturIntervalNumber     INTEGER,
    cIdslIturIntervalValidData  TruthValue,
    cIdslIturIntervalCVs        PerfIntervalCount,
    cIdslIturIntervalESs        PerfIntervalCount,
    cIdslIturIntervalSESs       PerfIntervalCount
}

cIdslIturIntervalNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The interval in which the statistics were collected, where the
        value of 1 represents the most recent interval, and the value of
        96 represents the interval collected 24 hours ago.  Intervals
        2..96 are optional."
    ::= { cIdslIturIntervalEntry 1 }

cIdslIturIntervalValidData OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies whether the data for this interval
        is valid."
    ::= { cIdslIturIntervalEntry 2 }

cIdslIturIntervalCVs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of coding violations 
        experienced by the ITU-R in the interval."
    ::= { cIdslIturIntervalEntry 3 }

cIdslIturIntervalESs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of errored seconds
        experienced by the ITU-R in the interval."
    ::= { cIdslIturIntervalEntry 4 }

cIdslIturIntervalSESs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of severely errored seconds
        experienced by the ITU-R in the interval."
    ::= { cIdslIturIntervalEntry 5 }

-- IDSL ITU-C Channel Performance Data Table
--    A future revision may use ciscoIdslLineMIBObjects.10 for the
--    purpose of defining the cIdslItucChanPerfDataTable, which will
--    contain channel related performance data maintained by ITU-C
--    class devices.

-- IDSL ITU-R Channel Performance Data Table
--    A future revision may use ciscoIdslLineMIBObjects.11 for the
--    purpose of defining the cIdslIturChanPerfDataTable, which will
--    contain channel related performance data maintained by ITU-R
--    class device.

-- IDSL ITU-C Channel Performance Interval Table
--    A future revision may use ciscoIdslLineMIBObjects.12 for the
--    purpose of defining the cIdslItucChanIntervalTable, which will
--    contain channel related interval data maintained by ITU-C class
--    device.

-- IDSL ITU-R Channel Performance Interval Table
--    A future revision may use ciscoIdslLineMIBObjects.13 for the
--    purpose of defining the cIdslIturChanIntervalTable, which will
--    contain channel related interval data maintained by ITU-R class
--    device.

-- IDSL Line Configuration Profile Table

cIdslLineConfProfileTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CIdslLineConfProfileEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table extends the adslLineConfProfileTable and contains
        IDSL line configuration information."
    ::= { ciscoIdslLineMIBObjects 14 }

cIdslLineConfProfileEntry OBJECT-TYPE
    SYNTAX      CIdslLineConfProfileEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A configuration profile containing enterprise-specific IDSL
        line configuration information."
    INDEX       { IMPLIED adslLineConfProfileName }
    ::= { cIdslLineConfProfileTable 1 }

CIdslLineConfProfileEntry ::= SEQUENCE {
    cIdslLineConfRate           INTEGER,
    cIdslLineConfProtocol       INTEGER,
    cIdslLineConfLmiProtocol    INTEGER,
    cIdslLineConfLmiNetN392     INTEGER,
    cIdslLineConfLmiNetN393     INTEGER,
    cIdslLineConfLmiNetT392     INTEGER,
    cIdslLineConfUpcIntent      INTEGER,
    cIdslLineConfBcDefault      Integer32
}

cIdslLineConfRate OBJECT-TYPE
    SYNTAX      INTEGER {
       rate144k(1),     -- 144 Kbps
       rate144kIdl(2),  -- 144 Kbps, IDL format
       rate128k(3),     -- 128 Kbps
       rate64k(4),      --  64 Kbps
       rate56k(5)       --  56 Kbps
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the desired line rate."
    ::= { cIdslLineConfProfileEntry 1 }

cIdslLineConfProtocol OBJECT-TYPE
    SYNTAX      INTEGER {
        frf(1),
        pppMuxCisco(2),
        pppMuxIetf(3),
        pppLlcIetf(4)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the layer 2 protocol to be employed
        by the line, and more specifically the encapsulation type:
        
        - frf
            Specifies the frame relay layer 2 protocol defined by
            FRF.8.  Observe that the encapsulation can be selected
            per virtual circuit.
        
        - pppMuxCisco
            Specifies the PPP using Cisco proprietary virtual circuit
            multiplexed encapsulation.

        - pppMuxIetf
            Specifies the PPP using virtual circuit multiplexed
            encapsulation defined by RFC-2364.

        - pppLlcIetf
            Specifies the PPP using the LLC (Link Layer Control)
            encapsulation defined by RFC-2364."
    REFERENCE
        "The Frame Relay Forum, Document FRF.8. Frame Relay/ATM PVC
        Service Internetworking Implementation Agreement, April 14,
        1995.
        
        IETF RFC-2364. PPP Over AAL5."
    DEFVAL      { frf }
    ::= { cIdslLineConfProfileEntry 2 }

cIdslLineConfLmiProtocol OBJECT-TYPE
    SYNTAX      INTEGER {
        noLmiConfigured(1),
        lmiRev1(2),
        ansiT1617D(3),      -- ANSI T1.617 Annex D
        ansiT1617B(4),      -- ANSI T1.617 Annex B
        itut933A(5),        -- CCITT Q933 Annex A
        ansiT1617D1994(6)   -- ANSI T1.617a-1994 Annex D
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object identifies the local inband signaling protocol."
    REFERENCE
        "ANSI T1.617-1991.  Integrated Services Digital Network (ISDN) -
        Signaling Specification for Frame Relay Bearer Service for
        Digital Subscriber Signaling System Number 1 (DSS1).
        
        ANSI T1.617-1994.  Integrated Services Digital Network (ISDN) -
        Signaling Specification for Frame Relay Bearer Service for
        Digital Subscriber Signaling System Number 1 (DSS1).
        
        ITU-T Q.933 10/95.  Integrated Services Digital Network (ISDN)
        Digital Subscriber Signaling System No. 1 (DSS 1) - Signaling
        Specifications for Frame Mode Switched and Permanent Virtual
        Connection Control and Status Monitoring."
    DEFVAL      { noLmiConfigured }
    ::= { cIdslLineConfProfileEntry 3 }

cIdslLineConfLmiNetN392 OBJECT-TYPE
    SYNTAX      INTEGER (1..10)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the interval between successive status
        enquiry messages."
    REFERENCE
        "ANSI T1.617-1991.  Integrated Services Digital Network (ISDN) -
        Signaling Specification for Frame Relay Bearer Service for
        Digital Subscriber Signaling System Number 1 (DSS1)."
    DEFVAL      { 2 }
    ::= { cIdslLineConfProfileEntry 4 }

cIdslLineConfLmiNetN393 OBJECT-TYPE
    SYNTAX      INTEGER (1..10)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the value of the network-side error
        threshold."
    REFERENCE
        "ANSI T1.617-1991.  Integrated Services Digital Network (ISDN) -
        Signaling Specification for Frame Relay Bearer Service for
        Digital Subscriber Signaling System Number 1 (DSS1)."
    DEFVAL      { 2 }
    ::= { cIdslLineConfProfileEntry 5 }

cIdslLineConfLmiNetT392 OBJECT-TYPE
    SYNTAX      INTEGER (5..30)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the value of the network-side polling
        verification timer."
    ::= { cIdslLineConfProfileEntry 6 }

cIdslLineConfUpcIntent OBJECT-TYPE
    SYNTAX      INTEGER {
        pass(1),
        tagDrop(2),
        tag(3),
        drop(4)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the default UPC (Usage Parameter Control)
        action for connections that do not explicitly specify a UPC
        action."
    DEFVAL      { pass }
    ::= { cIdslLineConfProfileEntry 7 }

cIdslLineConfBcDefault OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the default BC (Committed Burst Size)
        for connections that do not explicitly specify a BC."
    REFERENCE
        "Section 6.5.19, 'Link Layer Parameters', ANSI T1.617-1991.
        Integrated Services Digital Network (ISDN) - Signaling
        Specification for Frame Relay Bearer Service for Digital
        Subscriber Signaling System Number 1 (DSS1)."
    DEFVAL      { 0 }
    ::= { cIdslLineConfProfileEntry 8 }

-- IDSL Line Alarm Configuration Profile Table
--    A future revision may use ciscoIdslLineMIBObjects.15 for the
--    purpose of defining the cIdslLineAlarmConfProfileTable, which
--    will contain IDSL line alarm configuration information.

-- IDSL PPPoA Performance Data Table

cIdslPppoaPerfDataTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CIdslPppoaPerfDataEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains PPPoA statistics for those ITU-C class
        devices configured for PPP operation."
    ::= { ciscoIdslLineMIBObjects 16 }

cIdslPppoaPerfDataEntry OBJECT-TYPE
    SYNTAX      CIdslPppoaPerfDataEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A set of PPPoA statistics for an ITU-C class device configured
        for PPP operation.  There exists an entry for each ifEntry that
        meet the following criteria:
        
        1)  The ifEntry has an ifType of idsl(154);
        
        2)  The profile associated with the ITU-C class device specifies
            a value of 'ppp' for the cIdslLineProtocol object."
    INDEX       { ifIndex }
    ::= { cIdslPppoaPerfDataTable 1 }

CIdslPppoaPerfDataEntry ::= SEQUENCE {
    cIdslPppoaPerfRTOs                  Counter32,
    cIdslPppoaPerfCVs                   Counter32,
    cIdslPppoaPerfShorts                Counter32,
    cIdslPppoaPerfLongs                 Counter32,
    cIdslPppoaPerfDiscards              Counter32,
    cIdslPppoaPerfValidIntervals        INTEGER,
    cIdslPppoaPerfInvalidIntervals      INTEGER,
    cIdslPppoaPerfCurr15MinElapsed      IdslPerfTimeElapsed,
    cIdslPppoaPerfCurr15MinRTOs         PerfCurrentCount,
    cIdslPppoaPerfCurr15MinCVs          PerfCurrentCount,
    cIdslPppoaPerfCurr15MinShorts       PerfCurrentCount,
    cIdslPppoaPerfCurr15MinLongs        PerfCurrentCount,
    cIdslPppoaPerfCurr15MinDiscards     PerfCurrentCount,
    cIdslPppoaPerfCurr1DayElapsed       IdslPerfTimeElapsed,
    cIdslPppoaPerfCurr1DayRTOs          IdslPerfCurrDayCount,
    cIdslPppoaPerfCurr1DayCVs           IdslPerfCurrDayCount,
    cIdslPppoaPerfCurr1DayShorts        IdslPerfCurrDayCount,
    cIdslPppoaPerfCurr1DayLongs         IdslPerfCurrDayCount,
    cIdslPppoaPerfCurr1DayDiscards      IdslPerfCurrDayCount,
    cIdslPppoaPerfPrev1DayMoniSecs      INTEGER,
    cIdslPppoaPerfPrev1DayRTOs          IdslPerfPrevDayCount,
    cIdslPppoaPerfPrev1DayCVs           IdslPerfPrevDayCount,
    cIdslPppoaPerfPrev1DayShorts        IdslPerfPrevDayCount,
    cIdslPppoaPerfPrev1DayLongs         IdslPerfPrevDayCount,
    cIdslPppoaPerfPrev1DayDiscards      IdslPerfPrevDayCount
}

cIdslPppoaPerfRTOs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of frames that could not be
        completely reassembled due to a reassembly timeout before being
        transmitted over this PPP session since agent reset."
    ::= { cIdslPppoaPerfDataEntry 1 }

cIdslPppoaPerfCVs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session exhibiting a coding
        violation since agent reset."
    ::= { cIdslPppoaPerfDataEntry 2 }

cIdslPppoaPerfShorts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session containing less than
        5 octets since agent reset."
    ::= { cIdslPppoaPerfDataEntry 3 }

cIdslPppoaPerfLongs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session containing more than
        1500 octets since agent reset."
    ::= { cIdslPppoaPerfDataEntry 4 }

cIdslPppoaPerfDiscards OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the total number of frames intended for
        transmission over this PPP session that were discarded for any
        reason since agent reset."
    ::= { cIdslPppoaPerfDataEntry 5 }

cIdslPppoaPerfValidIntervals OBJECT-TYPE
    SYNTAX      INTEGER (0..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of previous near-end performance data 15-minute
        intervals for which data was collected.  The value will be <n>
        unless the measurement was (re-)started within the last (<n>*15)
        minutes, in which case the value will be the number of complete
        15-minute intervals for which the agent has at least some data.
        In certain cases (e.g., in the case where the agent is a proxy)
        it is possible that some intervals are unavailable.  In this
        case, this interval is the maximum interval number for which
        data is available."
    ::= { cIdslPppoaPerfDataEntry 6 }

cIdslPppoaPerfInvalidIntervals OBJECT-TYPE
    SYNTAX      INTEGER (0..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of near-end performance data 15-minute intervals in
        the range from 0 to cSdslStucPerfValidIntervals for which no
        data is available. This object will typically be zero except in
        cases where the data for some intervals are not available (e.g.,
        in proxy situations)."
    ::= { cIdslPppoaPerfDataEntry 7 }

cIdslPppoaPerfCurr15MinElapsed OBJECT-TYPE
    SYNTAX      IdslPerfTimeElapsed
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of seconds that have elapsed since the beginning of
        the current measurement period.  If, for some reason, such as an
        adjustment in the system's time-of-day clock, the current
        interval exceeds the maximum value, the agent will return
        the maximum value."
    ::= { cIdslPppoaPerfDataEntry 8 }

cIdslPppoaPerfCurr15MinRTOs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of frames that could not be
        completely reassembled due to a reassembly timeout before being
        transmitted over this PPP session in the current 15-minute
        interval."
    ::= { cIdslPppoaPerfDataEntry 9 }

cIdslPppoaPerfCurr15MinCVs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session exhibiting a coding
        violation in the current 15-minute interval."
    ::= { cIdslPppoaPerfDataEntry 10 }

cIdslPppoaPerfCurr15MinShorts OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session containing less than
        5 octets in the current 15-minute interval."
    ::= { cIdslPppoaPerfDataEntry 11 }

cIdslPppoaPerfCurr15MinLongs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session containing more than
        1500 octets in the current 15-minute interval."
    ::= { cIdslPppoaPerfDataEntry 12 }

cIdslPppoaPerfCurr15MinDiscards OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the total number of frames intended for
        transmission over this PPP session that were discarded for any
        reason in the current 15-minute interval."
    ::= { cIdslPppoaPerfDataEntry 13 }

cIdslPppoaPerfCurr1DayElapsed OBJECT-TYPE
    SYNTAX      IdslPerfTimeElapsed
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of seconds that have elapsed since the beginning of
        the current measurement period.  If, for some reason, such as an
        adjustment in the system's time-of-day clock, the current
        interval exceeds the maximum value, the agent will return
        the maximum value."
    ::= { cIdslPppoaPerfDataEntry 14 }

cIdslPppoaPerfCurr1DayRTOs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of frames that could not be
        completely reassembled due to a reassembly timeout before being
        transmitted over this PPP session in the current 1-day
        interval."
    ::= { cIdslPppoaPerfDataEntry 15 }

cIdslPppoaPerfCurr1DayCVs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session exhibiting a coding
        violation in the current 1-day interval."
    ::= { cIdslPppoaPerfDataEntry 16 }

cIdslPppoaPerfCurr1DayShorts OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session containing less than
        5 octets in the current 1-day interval."
    ::= { cIdslPppoaPerfDataEntry 17 }

cIdslPppoaPerfCurr1DayLongs OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session containing more than
        1500 octets in the current 1-day interval."
    ::= { cIdslPppoaPerfDataEntry 18 }

cIdslPppoaPerfCurr1DayDiscards OBJECT-TYPE
    SYNTAX      IdslPerfCurrDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the total number of frames intended for
        transmission over this PPP session that were discarded for any
        reason in the current 1-day interval."
    ::= { cIdslPppoaPerfDataEntry 19 }

cIdslPppoaPerfPrev1DayMoniSecs OBJECT-TYPE
    SYNTAX      INTEGER  (0..86400)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of time in the previous 1-day interval over which
        the performance monitoring information is actually counted.
        This value will be the same as the interval duration except
        in a situation where performance monitoring data could not be
        collected for any reason."
    ::= { cIdslPppoaPerfDataEntry 20 }

cIdslPppoaPerfPrev1DayRTOs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of frames that could not be
        completely reassembled due to a reassembly timeout before being
        transmitted over this PPP session in the previous 1-day
        interval."
    ::= { cIdslPppoaPerfDataEntry 21 }

cIdslPppoaPerfPrev1DayCVs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session exhibiting a coding
        violation in the previous 1-day interval."
    ::= { cIdslPppoaPerfDataEntry 22 }

cIdslPppoaPerfPrev1DayShorts OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session containing less than
        5 octets in the previous 1-day interval."
    ::= { cIdslPppoaPerfDataEntry 23 }

cIdslPppoaPerfPrev1DayLongs OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session containing more than
        1500 octets in the previous 1-day interval."
    ::= { cIdslPppoaPerfDataEntry 24 }

cIdslPppoaPerfPrev1DayDiscards OBJECT-TYPE
    SYNTAX      IdslPerfPrevDayCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the total number of frames intended for
        transmission over this PPP session that were discarded for any
        reason in the previous 1-day interval."
    ::= { cIdslPppoaPerfDataEntry 25 }

-- IDSL PPPoA Performance Interval Table

cIdslPppoaIntervalTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CIdslPppoaIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains PPPoA statistics intervals for those ITU-C
        class devices configured for PPP operation."
    ::= { ciscoIdslLineMIBObjects 17 }

cIdslPppoaIntervalEntry OBJECT-TYPE
    SYNTAX      CIdslPppoaIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A 15-minute interval of PPPoA statistics intervals for a ITU-C
        class device configured for PPP operation.  There exists up to
        96 entries for each ifEntry that meets the following criteria:
        
        1)  The ifEntry has an ifType of idsl(154);
        
        2)  The profile associated with the ITU-C class device specifies
            a value of 'ppp' for the cIdslLineProtocol object."
    INDEX       { ifIndex, cIdslPppoaIntervalNumber }
    ::= { cIdslPppoaIntervalTable 1 }

CIdslPppoaIntervalEntry ::= SEQUENCE {
    cIdslPppoaIntervalNumber             INTEGER,
    cIdslPppoaIntervalValidData          TruthValue,
    cIdslPppoaIntervalRTOs              PerfIntervalCount,
    cIdslPppoaIntervalCVs               PerfIntervalCount,
    cIdslPppoaIntervalShorts            PerfIntervalCount,
    cIdslPppoaIntervalLongs             PerfIntervalCount,
    cIdslPppoaIntervalDiscards          PerfIntervalCount
}

cIdslPppoaIntervalNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The interval in which the statistics were collected, where the
        value of 1 represents the most recent interval, and the value of
        96 represents the interval collected 24 hours ago.  Intervals
        2..96 are optional."
    ::= { cIdslPppoaIntervalEntry 1 }

cIdslPppoaIntervalValidData OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies whether the data for this interval
        is valid."
    ::= { cIdslPppoaIntervalEntry 2 }

cIdslPppoaIntervalRTOs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of frames that could not be
        completely reassembled due to a reassembly timeout before being
        transmitted over this PPP session in the interval."
    ::= { cIdslPppoaIntervalEntry 3 }

cIdslPppoaIntervalCVs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session exhibiting a coding
        violation in the interval."
    ::= { cIdslPppoaIntervalEntry 4 }

cIdslPppoaIntervalShorts OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session containing less than
        5 octets in the interval."
    ::= { cIdslPppoaIntervalEntry 5 }

cIdslPppoaIntervalLongs OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the number of reassembled frames intended
        for transmission over this PPP session containing more than
        1500 octets in the interval."
    ::= { cIdslPppoaIntervalEntry 6 }

cIdslPppoaIntervalDiscards OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object specifies the total number of frames intended for
        transmission over this PPP session that were discarded for any
        reason in the interval."
    ::= { cIdslPppoaIntervalEntry 7 }

-- IDSL PPPoA VC Mapping Table

cIdslPppoaMapTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CIdslPppoaMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table defines the mapping between PPP sessions and
        ATM VC."
    ::= { ciscoIdslLineMIBObjects 18 }

cIdslPppoaMapEntry OBJECT-TYPE
    SYNTAX      CIdslPppoaMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A mapping between a PPP session and an ATM VC.  There exists an
        entry for each ifEntry that meet the following criteria:
        
        1)  The ifEntry has an ifType of idsl(154);
        
        2)  The profile associated with the ITU-C class device specifies
            a value of 'ppp' for the cIdslLineProtocol object."
    INDEX       { ifIndex }
    ::= { cIdslPppoaMapTable 1 }

CIdslPppoaMapEntry ::= SEQUENCE {
    cIdslPppoaMapIfIndex    InterfaceIndex,
    cIdslPppoaMapVpi        INTEGER,
    cIdslPppoaMapVci        INTEGER
}

cIdslPppoaMapIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ifIndex associated with the pseudo-ATM interface 
        onto which the IDSL interface is being mapped."
    ::= { cIdslPppoaMapEntry 1 }

cIdslPppoaMapVpi OBJECT-TYPE
    SYNTAX      INTEGER (0..4095)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The VPI (Virtual Path Identifier) associated with the ATM
        VCL onto which the PPP session is being mapped."
    ::= { cIdslPppoaMapEntry 2 }

cIdslPppoaMapVci OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The VCI (Virtual Circuit Identifier) associated with the
        ATM VCL onto which the PPP session is being mapped."
    ::= { cIdslPppoaMapEntry 3 }

-- MIB Notification Definitions

ciscoIdslLineMIBNotificationsPrefix OBJECT IDENTIFIER
    ::= { ciscoIdslLineMIB 2 }

ciscoIdslLineMIBNotifications OBJECT IDENTIFIER
    ::= { ciscoIdslLineMIBNotificationsPrefix 0 }

-- MIB Conformance Statements

ciscoIdslLineMIBConformance OBJECT IDENTIFIER
    ::= { ciscoIdslLineMIB 3 }

ciscoIdslLineMIBCompliances OBJECT IDENTIFIER
    ::= { ciscoIdslLineMIBConformance 1 }

ciscoIdslLineMIBGroups OBJECT IDENTIFIER
    ::= { ciscoIdslLineMIBConformance 2 }

-- Compliance

ciscoIdslLineMIBCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The compliance statement for entities that implement the
        CISCO-IDSL-LINE-MIB.  Implementation of this MIB is mandatory
        for any platform that supports one or more IDSL line
        interfaces."

    MODULE -- this module
        MANDATORY-GROUPS {
            cIdslBasicGroup
        }

    GROUP       cIdslPM15MinIntervalGroup
    DESCRIPTION
        "The implementation of this group is optional."
    ::= { ciscoIdslLineMIBCompliances 1 }

-- Units of Conformance

cIdslBasicGroup OBJECT-GROUP
    OBJECTS {
        cIdslLineSpecific,
        cIdslLineConfProfile,
        cIdslLineAlarmConfProfile,
        cIdslItucInvSerialNumber,
        cIdslItucInvVendorId,
        cIdslItucInvVersionNumber,
        cIdslItucStatus,
        cIdslItucPerfCVs,
        cIdslItucPerfESs,
        cIdslItucPerfSESs,
        cIdslItucPerfHdlcCVs,
        cIdslItucPerfHdlcAborts,
        cIdslItucPerfHdlcAligns,
        cIdslItucPerfHdlcShorts,
        cIdslItucPerfHdlcLongs,
        cIdslIturPerfCVs,
        cIdslIturPerfESs,
        cIdslIturPerfSESs,
        cIdslLineConfRate,
        cIdslLineConfProtocol,
        cIdslLineConfLmiProtocol,
        cIdslLineConfLmiNetN392,
        cIdslLineConfLmiNetN393,
        cIdslLineConfLmiNetT392,
        cIdslLineConfUpcIntent,
        cIdslLineConfBcDefault,
        cIdslPppoaPerfRTOs,
        cIdslPppoaPerfCVs,
        cIdslPppoaPerfShorts,
        cIdslPppoaPerfLongs,
        cIdslPppoaPerfDiscards,
        cIdslPppoaMapIfIndex,
        cIdslPppoaMapVpi,
        cIdslPppoaMapVci
    }
    STATUS current
    DESCRIPTION
        "A collection of managed objects defining the basic operation
        of an IDSL line."
    ::= { ciscoIdslLineMIBGroups 1 }

cIdslPM15MinIntervalGroup OBJECT-GROUP
    OBJECTS {
        cIdslItucPerfValidIntervals,
        cIdslItucPerfInvalidIntervals,
        cIdslItucPerfCurr15MinElapsed,
        cIdslItucPerfCurr15MinCVs,
        cIdslItucPerfCurr15MinESs,
        cIdslItucPerfCurr15MinSESs,
        cIdslItucPerfCurr15MinHdlcCVs,
        cIdslItucPerfCurr15MinHdlcAborts,
        cIdslItucPerfCurr15MinHdlcAligns,
        cIdslItucPerfCurr15MinHdlcShorts,
        cIdslItucPerfCurr15MinHdlcLongs,
        cIdslItucPerfCurr1DayElapsed,
        cIdslItucPerfCurr1DayCVs,
        cIdslItucPerfCurr1DayESs,
        cIdslItucPerfCurr1DaySESs,
        cIdslItucPerfCurr1DayHdlcCVs,
        cIdslItucPerfCurr1DayHdlcAborts,
        cIdslItucPerfCurr1DayHdlcAligns,
        cIdslItucPerfCurr1DayHdlcShorts,
        cIdslItucPerfCurr1DayHdlcLongs,
        cIdslItucPerfPrev1DayMoniSecs,
        cIdslItucPerfPrev1DayCVs,
        cIdslItucPerfPrev1DayESs,
        cIdslItucPerfPrev1DaySESs,
        cIdslItucPerfPrev1DayHdlcCVs,
        cIdslItucPerfPrev1DayHdlcAborts,
        cIdslItucPerfPrev1DayHdlcAligns,
        cIdslItucPerfPrev1DayHdlcShorts,
        cIdslItucPerfPrev1DayHdlcLongs,
        cIdslIturPerfValidIntervals,
        cIdslIturPerfInvalidIntervals,
        cIdslIturPerfCurr15MinElapsed,
        cIdslIturPerfCurr15MinCVs,
        cIdslIturPerfCurr15MinESs,
        cIdslIturPerfCurr15MinSESs,
        cIdslIturPerfCurr1DayElapsed,
        cIdslIturPerfCurr1DayCVs,
        cIdslIturPerfCurr1DayESs,
        cIdslIturPerfCurr1DaySESs,
        cIdslIturPerfPrev1DayMoniSecs,
        cIdslIturPerfPrev1DayCVs,
        cIdslIturPerfPrev1DayESs,
        cIdslIturPerfPrev1DaySESs,
        cIdslItucIntervalNumber,
        cIdslItucIntervalValidData,
        cIdslItucIntervalCVs,
        cIdslItucIntervalESs,
        cIdslItucIntervalSESs,
        cIdslItucIntervalHdlcCVs,
        cIdslItucIntervalHdlcAborts,
        cIdslItucIntervalHdlcAligns,
        cIdslItucIntervalHdlcShorts,
        cIdslItucIntervalHdlcLongs,
        cIdslIturIntervalNumber,
        cIdslIturIntervalValidData,
        cIdslIturIntervalCVs,
        cIdslIturIntervalESs,
        cIdslIturIntervalSESs,
        cIdslPppoaPerfValidIntervals,
        cIdslPppoaPerfInvalidIntervals,
        cIdslPppoaPerfCurr15MinElapsed,
        cIdslPppoaPerfCurr15MinRTOs,
        cIdslPppoaPerfCurr15MinCVs,
        cIdslPppoaPerfCurr15MinShorts,
        cIdslPppoaPerfCurr15MinLongs,
        cIdslPppoaPerfCurr15MinDiscards,
        cIdslPppoaPerfCurr1DayElapsed,
        cIdslPppoaPerfCurr1DayRTOs,
        cIdslPppoaPerfCurr1DayCVs,
        cIdslPppoaPerfCurr1DayShorts,
        cIdslPppoaPerfCurr1DayLongs,
        cIdslPppoaPerfCurr1DayDiscards,
        cIdslPppoaPerfPrev1DayMoniSecs,
        cIdslPppoaPerfPrev1DayRTOs,
        cIdslPppoaPerfPrev1DayCVs,
        cIdslPppoaPerfPrev1DayShorts,
        cIdslPppoaPerfPrev1DayLongs,
        cIdslPppoaPerfPrev1DayDiscards,
        cIdslPppoaIntervalNumber,
        cIdslPppoaIntervalValidData,
        cIdslPppoaIntervalRTOs,
        cIdslPppoaIntervalCVs,
        cIdslPppoaIntervalShorts,
        cIdslPppoaIntervalLongs,
        cIdslPppoaIntervalDiscards
    }
    STATUS current
    DESCRIPTION
        "A collection of managed objects defining performance data
        collection capability using 15-minute intervals."
    ::= { ciscoIdslLineMIBGroups 2 }

END