CISCO-RF-CAPABILITY device MIB details by Cisco

CISCO-RF-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-RF-CAPABILITY.

Vendor:	Cisco
Mib:	CISCO-RF-CAPABILITY  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-RF-CAPABILITY.my:  CISCO-RF-MIB AGENT-CAPABILITIES
--
-- January 2001, Timothy Kurnik
--
-- Copyright (c) 2001-2003 by cisco Systems, Inc.
-- All rights reserved.
-- 
-- *****************************************************************
--

CISCO-RF-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY
            FROM SNMPv2-SMI
    AGENT-CAPABILITIES
            FROM SNMPv2-CONF
    ciscoAgentCapability
            FROM CISCO-SMI;

ciscoRFCapability MODULE-IDENTITY
    LAST-UPDATED "200308200000Z"
    ORGANIZATION "Cisco Systems, Inc."
    CONTACT-INFO
        "Cisco Systems Customer Service
         Postal: 170 West Tasman Drive
                 San Jose, CA 95134
                 USA
         Tel: +1 800 553-NETS

         E-mail: cs-rf-mib@cisco.com
        "
    DESCRIPTION
        "Added agent Capabilities for CISCO-RF-MIB shipped as part of
         the Cisco IOS 12.1 release.
        "
    REVISION     "200308200000Z"
    DESCRIPTION
        "Added ciscoRFCapabilityV12R0111bEXCat6k,
         ciscoRFCapabilityV12R0113ECat6k, and
         ciscoRFCapabilityCatOSV8R0101Cat6K."

    REVISION     "200101041000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoAgentCapability 999 }

ciscoRFCapabilityV12R01 AGENT-CAPABILITIES

    PRODUCT-RELEASE     "Cisco IOS 12.1"
    STATUS              current
    DESCRIPTION         "Cisco RF MIB capabilities"

    SUPPORTS            CISCO-RF-MIB
    INCLUDES            {
                         ciscoRFStatusGroup,
                         ciscoRFConfigGroup,
                         ciscoRFNotifGroup
                        }

    ::= { ciscoRFCapability 1 }

ciscoRFCapabilityV12R0111bEXCat6k AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco IOS 12.1(11bEX) on Catalyst 6000/6500
                         and Cisco 7600 series devices."
    STATUS              current
    DESCRIPTION         "CISCO-RF-MIB capabilities."

    SUPPORTS            CISCO-RF-MIB
        INCLUDES        { ciscoRFStatusGroup,
                          ciscoRFConfigGroup,
                          ciscoRFNotifGroup,
                          ciscoRFStatusRFModeCapsGroup }

        VARIATION       cRFStatusLastSwactReasonCode
            SYNTAX      INTEGER { unsupported(1) }
            DESCRIPTION "Only support unsupported(1)."

        VARIATION       cRFCfgRedundancyMode
            SYNTAX      INTEGER { coldStandbyRedundant(6),
                                  warmStandbyRedundant(7) }
            DESCRIPTION "Only support coldStandbyRedundant(6),
                        warmStandbyRedundant(7)."

    ::= { ciscoRFCapability 2 }

ciscoRFCapabilityV12R0113ECat6k AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco IOS 12.1(13E) on Catalyst 6000/6500
                         and Cisco 7600 series devices."
    STATUS              current
    DESCRIPTION         "CISCO-RF-MIB capabilities."

    SUPPORTS            CISCO-RF-MIB
        INCLUDES        { ciscoRFNotifGroup,
                          ciscoRFConfigGroupRev1,
                          ciscoRFStatusGroupRev1,
                          ciscoRFHistoryGroup,
                          ciscoRFStatusRFModeCapsGroup }

        VARIATION       cRFStatusLastSwactReasonCode
            SYNTAX      INTEGER { unsupported(1) }
            DESCRIPTION "Only support unsupported(1)."

        VARIATION       cRFCfgRedundancyMode
            SYNTAX      INTEGER { coldStandbyRedundant(6),
                                  warmStandbyRedundant(7) }
            DESCRIPTION "Only support coldStandbyRedundant(6),
                        warmStandbyRedundant(7)."

        VARIATION       cRFHistoryColdStarts
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

    ::= { ciscoRFCapability 3 }

ciscoRFCapabilityCatOSV8R0101Cat6K AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.1(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices."
    STATUS              current
    DESCRIPTION         "CISCO-RF-MIB capabilities."

    SUPPORTS            CISCO-RF-MIB
        INCLUDES        { ciscoRFNotifGroup,
                          ciscoRFConfigGroupRev1,
                          ciscoRFStatusGroupRev1,
                          ciscoRFHistoryGroup,
                          ciscoRFStatusRFModeCapsGroup }

        VARIATION       cRFStatusUnitState
            SYNTAX      INTEGER { disabled(2), initialization(3),
                                  negotiation(4), active(14) }
            DESCRIPTION "Only support disabled(2), initialization(3),
                        negotiation(4), active(14)."

        VARIATION       cRFStatusPeerUnitState
            SYNTAX      INTEGER { standbyCold(5),
                                  standbyColdConfig(6),
                                  standbyColdFileSys(7),
                                  standbyColdBulk(8),
                                  standbyHot(9) }
            DESCRIPTION "Only support standbyCold(5),
                        standbyColdConfig(6), standbyColdFileSys(7),
                        standbyColdBulk(8), standbyHot(9)."

        VARIATION       cRFStatusLastSwactReasonCode
            SYNTAX      INTEGER { none(2),
                                  userInitiated(4),
                                  activeUnitFailed(6),
                                  activeUnitRemoved(7) }
            DESCRIPTION "Only support none(2), userInitiated(4),
                        activeUnitFailed(6), activeUnitRemoved(7)."

        VARIATION       cRFCfgKeepaliveThresh
            ACCESS      read-only
            DESCRIPTION "Only support read access."

        VARIATION       cRFCfgKeepaliveThreshMin
            SYNTAX      INTEGER (6)
            DESCRIPTION "Returns only 6."

        VARIATION       cRFCfgKeepaliveThreshMax
            SYNTAX      INTEGER (6)
            DESCRIPTION "Returns only 6."

        VARIATION       cRFCfgKeepaliveTimer
            ACCESS      read-only
            DESCRIPTION "Only support read access."

        VARIATION       cRFCfgKeepaliveTimerMin
            SYNTAX      INTEGER (10000)
            DESCRIPTION "Returns only 10000."

        VARIATION       cRFCfgKeepaliveTimerMax
            SYNTAX      INTEGER (10000)
            DESCRIPTION "Returns only 10000."

        VARIATION       cRFCfgNotifTimer
            ACCESS      read-only
            DESCRIPTION "Only support read access."

        VARIATION       cRFCfgAdminAction
            SYNTAX      INTEGER { noAction(0), reloadPeer(1),

                                  reloadShelf(2), switchActivity(3) }
            DESCRIPTION "Only support noAction(0), reloadPeer(1),
                        reloadShelf(2), switchActivity(3)."

        VARIATION       cRFCfgMaintenanceMode
            SYNTAX      INTEGER { false(2) }
            DESCRIPTION "Only support false(2)."

        VARIATION       cRFCfgRedundancyMode
            SYNTAX      INTEGER { warmStandbyRedundant(7),
                                  hotStandbyRedundant(8) }
            DESCRIPTION "Only support warmStandbyRedundant(7),
                        hotStandbyRedundant(8)."

        VARIATION       cRFHistoryTableMaxLength
            ACCESS      read-only
            DESCRIPTION "Only support read access."

    ::= { ciscoRFCapability 4 }

END