You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-SYS-INFO-LOG-CAPABILITY
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-SYS-INFO-LOG-CAPABILITY by vendor Cisco

CISCO-SYS-INFO-LOG-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-SYS-INFO-LOG-CAPABILITY.


Vendor: Cisco
Mib: CISCO-SYS-INFO-LOG-CAPABILITY  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-SYS-INFO-LOG-CAPABILITY.my:
-- Cisco CISCO-SYS-INFO-LOG-MIB AGENT-CAPABILITIES
--
-- July 2003, Binh Le
--
-- Copyright (c) 2003 by Cisco Systesms, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-SYS-INFO-LOG-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, Unsigned32
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        SnmpAdminString
                FROM SNMP-FRAMEWORK-MIB
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoSysInfoLogCapability MODULE-IDENTITY
        LAST-UPDATED    "200308010000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 West Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-lan-switch-snmp@cisco.com"
        DESCRIPTION
                "The capabilities description of
                 CISCO-SYS-INFO-LOG-MIB."

        REVISION        "200308010000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoAgentCapability 321 }

ciscoSysInfoLogCapCatOSV08R0101 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "Cisco CatOS 8.1(1)."
    STATUS               current
    DESCRIPTION          "CISCO-SYS-INFO-LOG-MIB capabilities."

    SUPPORTS             CISCO-SYS-INFO-LOG-MIB
        INCLUDES         { csilGlobalConfigGroup, csilServerConfigGroup,
                           csilCommandConfigGroup,
                           csilNotifControlGroup,
                           csilLoggingFailNotifGroup }

        VARIATION        csilMaxServerAllowed
            SYNTAX       Unsigned32(1)
            DESCRIPTION  "Only support one logging server."

        VARIATION        csilServerAddressType
            SYNTAX       INTEGER { ipv4(1) }
            DESCRIPTION  "Only support IPv4 addresses."

        VARIATION        csilServerProfileIndex
            SYNTAX       Unsigned32(1)
            DESCRIPTION  "Only support one profile on a server."

        VARIATION        csilServerLoggingFileName
            SYNTAX       SnmpAdminString (SIZE (1..64))
            DESCRIPTION  "Only support file name not exceed 64
                          characters."

        VARIATION        csilServerRcpUserName
            SYNTAX       SnmpAdminString (SIZE (1..40))
            DESCRIPTION  "Only support user name not exceed 40
                          characters."

        VARIATION        csilServerInterval
            SYNTAX       Unsigned32 (1..64800)
            DESCRIPTION  "Only support the maximum interval of 45 days."

        VARIATION        csilServerRowStatus
            SYNTAX       INTEGER {active(1)}
            DESCRIPTION  "Only support the value active(1)."

        VARIATION        csilMaxCommandPerProfile
            SYNTAX       Unsigned32(15)
            DESCRIPTION  "Only support maximum 15 commands per profile."

        VARIATION        csilCommandString
            SYNTAX       SnmpAdminString (SIZE (1..48))
            DESCRIPTION  "Only support commands not exceed 48 
                          characters."

    ::= { ciscoSysInfoLogCapability 1 }

END