OLD-CISCO-DECNET-MIB device MIB details by Cisco
OLD-CISCO-DECNET-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing OLD-CISCO-DECNET-MIB.
| Vendor: | Cisco |
|---|---|
| Mib: | OLD-CISCO-DECNET-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- OLD-CISCO-DECNET-MIB.my: Old Cisco DECnet MIB file -- -- Copyright (c) 1994 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- OLD-CISCO-DECNET-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 ifIndex FROM RFC1213-MIB temporary FROM CISCO-SMI; tmpdecnet OBJECT IDENTIFIER ::= { temporary 1 } -- Temporary DECNET Section -- This group is present in all router based products. dnForward OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of DECNET packets forwarded." ::= { tmpdecnet 1 } dnReceived OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of total DECNET packets received." ::= { tmpdecnet 2 } dnFormaterr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of DECNET packets received with header errors." ::= { tmpdecnet 3 } dnNotgateway OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received while not routing." ::= { tmpdecnet 4 } dnNotimp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of unknown control packets received." ::= { tmpdecnet 5 } dnHellos OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Hellos received." ::= { tmpdecnet 6 } dnBadhello OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of received bad Hellos." ::= { tmpdecnet 7 } dnNotlong OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of received packets not in long format." ::= { tmpdecnet 8 } dnDatas OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of received data packets." ::= { tmpdecnet 9 } dnBigaddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of too large addresses." ::= { tmpdecnet 10 } dnNoroute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped due to no route present." ::= { tmpdecnet 11 } dnNoencap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped due to output encapsulation failure." ::= { tmpdecnet 12 } dnLevel1s OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Level 1 routing packets received." ::= { tmpdecnet 13 } dnBadlevel1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bad Level 1 routing packets received." ::= { tmpdecnet 14 } dnToomanyhops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received which visited too many nodes." ::= { tmpdecnet 15 } dnHellosent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Hellos output." ::= { tmpdecnet 16 } dnLevel1sent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Level 1 routing packets sent." ::= { tmpdecnet 17 } dnNomemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of memory requests denied." ::= { tmpdecnet 18 } dnOtherhello OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Hellos received from another area." ::= { tmpdecnet 19 } dnOtherlevel1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Level 1 routing packets received from another area." ::= { tmpdecnet 20 } dnLevel2s OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Level 2 routing packets received." ::= { tmpdecnet 21 } dnLevel2sent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Level 2 routing packets sent." ::= { tmpdecnet 22 } dnNovector OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of missing routing vectors." ::= { tmpdecnet 23 } dnOtherlevel2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of received Level 2 routing packets from another area." ::= { tmpdecnet 24 } dnNoaccess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped due to access control failure." ::= { tmpdecnet 25 } dnAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF DnAreaTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DECNET area routing table" ::= { tmpdecnet 26 } dnAreaTableEntry OBJECT-TYPE SYNTAX DnAreaTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DECNET area routing table" INDEX { dnArea } ::= { dnAreaTable 1 } DnAreaTableEntry ::= SEQUENCE { dnArea INTEGER, dnACost INTEGER, dnAHop INTEGER, dnAIfIndex INTEGER, dnANextHop OCTET STRING, dnAAge INTEGER, dnAPrio INTEGER } -- The following section describes the components of the -- table. dnArea OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "DECNet area from the area table." ::= { dnAreaTableEntry 1 } dnACost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cost of area in the area table." ::= { dnAreaTableEntry 2 } dnAHop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of hops to area in the area table." ::= { dnAreaTableEntry 3 } dnAIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of interface to the next hop address to the area. 0 denotes self." ::= { dnAreaTableEntry 4 } dnANextHop OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Next hop DECNet address." ::= { dnAreaTableEntry 5 } dnAAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Age in seconds of area route." ::= { dnAreaTableEntry 6 } dnAPrio OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority of next hop router for area route." ::= { dnAreaTableEntry 7 } -- End of table dnHostTable OBJECT-TYPE SYNTAX SEQUENCE OF DnHostTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DECNET routing table" ::= { tmpdecnet 27 } dnHostTableEntry OBJECT-TYPE SYNTAX DnHostTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DECNET routing table" INDEX { dnHIdx1, dnHIdx2 } ::= { dnHostTable 1 } DnHostTableEntry ::= SEQUENCE { dnHost INTEGER, dnHCost INTEGER, dnHHop INTEGER, dnHIfIndex INTEGER, dnHNextHop OCTET STRING, dnHAge INTEGER, dnHPrio INTEGER, dnHIdx1 INTEGER, dnHIdx2 INTEGER } -- The following section describes the components of the -- table. dnHost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "DECNet node address from the routing table." ::= { dnHostTableEntry 1 } dnHCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cost of path to node in the routing table." ::= { dnHostTableEntry 2 } dnHHop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of hops to node in the routing table." ::= { dnHostTableEntry 3 } dnHIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of interface to the next hop address to the node. 0 denotes self." ::= { dnHostTableEntry 4 } dnHNextHop OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Next hop DECNet address." ::= { dnHostTableEntry 5 } dnHAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Age in seconds of route to node." ::= { dnHostTableEntry 6 } dnHPrio OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority of next hop router for node." ::= { dnHostTableEntry 7 } dnHIdx1 OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "table index 1." ::= { dnHostTableEntry 8 } dnHIdx2 OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "table index 2." ::= { dnHostTableEntry 9 } -- End of table dnIfTable OBJECT-TYPE SYNTAX SEQUENCE OF DnIfTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DECNET interface table" ::= { tmpdecnet 28 } dnIfTableEntry OBJECT-TYPE SYNTAX DnIfTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DECNET interface table" INDEX { ifIndex } ::= { dnIfTable 1 } DnIfTableEntry ::= SEQUENCE { dnIfCost INTEGER } -- The following section describes the components of the -- table. dnIfCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cost of this interface." ::= { dnIfTableEntry 1 } -- End of table END