You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Enterasys Networks > ENTERASYS-SYSLOG-CLIENT-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

ENTERASYS-SYSLOG-CLIENT-MIB by vendor Enterasys Networks

ENTERASYS-SYSLOG-CLIENT-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing ENTERASYS-SYSLOG-CLIENT-MIB.


Vendor: Enterasys Networks
Mib: ENTERASYS-SYSLOG-CLIENT-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
ENTERASYS-SYSLOG-CLIENT-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
              Unsigned32, Counter32, Gauge32
              FROM SNMPv2-SMI
    RowStatus, TEXTUAL-CONVENTION, TimeStamp
              FROM SNMPv2-TC
    InetAddressType, InetAddress
              FROM INET-ADDRESS-MIB
    MODULE-COMPLIANCE, OBJECT-GROUP
              FROM SNMPv2-CONF
    SnmpAdminString
              FROM SNMP-FRAMEWORK-MIB
    etsysModules
              FROM ENTERASYS-MIB-NAMES;

etsysSyslogClientMIB  MODULE-IDENTITY
    LAST-UPDATED "200311061515Z"  -- Thu Nov  6 15:15 GMT 2003
    ORGANIZATION "Enterasys Networks"
    CONTACT-INFO
        "Postal:  Enterasys Networks
                  50 Minuteman Rd.
                  Andover, MA 01810-1008
                  USA
         Phone:   +1 978 684 1000
         E-mail:  support@enterasys.com
         WWW:     http://www.enterasys.com"

    DESCRIPTION
        "This MIB module defines a portion of the SNMP enterprise 
         MIBs under the Enterasys enterprise OID pertaining to the 
         configuration of the generation of Syslog compatible
         diagnostic messages for Enterasys products."

    REVISION    "200311061515Z"  -- Thu Nov  6 15:15 GMT 2003
    DESCRIPTION
        "Corrected the postal code in the CONTACT-INFO clause."

    REVISION "200307311419Z"  -- Thu Jul 31 14:19 GMT 2003
    DESCRIPTION
        "Augmented etsysSyslogClientControl to support the option 
         of logging to non-volatile memory, added a DEFVAL clause
         to etsysSyslogClientControl, and added an object,
         etsysSyslogApplicationAllowedServers, to control which
         syslog servers will be sent messages on a per application
         basis."

    REVISION "200112031955Z"  -- Mon Dec  3 19:55 GMT 2001
    DESCRIPTION
        "Removed the import of BITS from SNMPv2-SMI."

    REVISION "200108080000Z"
    DESCRIPTION
        "The initial version of this MIB module."

    ::= { etsysModules 14 }

-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------

SyslogUdpPort  ::=  TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The UDP port number the client is using to send requests
         to this server.  514 is the IANA assigned port number for
         syslog."
    SYNTAX      Unsigned32

SyslogFacility  ::=  TEXTUAL-CONVENTION
    STATUS  current
    DESCRIPTION
        "This textual convention maps out to the facilities
         available for syslog messages."
    SYNTAX  INTEGER {
                      local0(16),
                      local1(17),
                      local2(18),
                      local3(19),
                      local4(20),
                      local5(21),
                      local6(22),
                      local7(23)
                    }

SyslogSeverity  ::=  TEXTUAL-CONVENTION
    STATUS  current
    DESCRIPTION
        "This textual convention maps out to the severity levels
         of syslog messages.  The syslog protocol uses the values
         0 (emergency), to 7 (debug)."
    SYNTAX  INTEGER {
                      emergency(1),
                      alert(2),
                      critical(3),
                      error(4),
                      warning(5),
                      notice(6),
                      info(7),
                      debug(8)
                    }


-- -------------------------------------------------------------
-- etsysSyslogClientMIB  groupings
-- -------------------------------------------------------------

etsysSyslogClient          OBJECT IDENTIFIER 
                      ::= { etsysSyslogClientMIB 1 }

etsysSyslogServer          OBJECT IDENTIFIER 
                      ::= { etsysSyslogClientMIB 2 }

etsysSyslogApplication     OBJECT IDENTIFIER 
                      ::= { etsysSyslogClientMIB 3 }

-- -------------------------------------------------------------
-- etsysSyslogClient group           
-- -------------------------------------------------------------

etsysSyslogClientMessages OBJECT-TYPE
    SYNTAX      Counter32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of messages successfully delivered to
         the upstream side of the syslog client software
         for processing."
    ::= { etsysSyslogClient 1 }

etsysSyslogClientMessagesDropped OBJECT-TYPE
    SYNTAX      Counter32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of messages unable to be queued to
         the downstream side of the syslog client software
         for transmitting."
    ::= { etsysSyslogClient 2 }

etsysSyslogClientLastMessageTime OBJECT-TYPE
    SYNTAX      TimeStamp 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The sysUpTime of the last attempt, successful or
         otherwise, to queue a message to the downstream
         side of the syslog client software."
    ::= { etsysSyslogClient 3 }

etsysSyslogClientControl OBJECT-TYPE
    SYNTAX      BITS  {
        etsysSyslogClientControlConsoleLogging(0),
                                -- Log messages to the console.
        etsysSyslogClientControlPersistentLogging(1)
                                -- Log messages to non-volatile store.
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "A list of attributes to control the operation of the
         syslog client."
    DEFVAL { { etsysSyslogClientControlConsoleLogging } }
    ::= { etsysSyslogClient 4 }

-- -------------------------------------------------------------
-- etsysSyslogServer table group
-- -------------------------------------------------------------

etsysSyslogServerMaxEntries OBJECT-TYPE
    SYNTAX      Unsigned32 (1..8)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of entries allowed in the
         etsysSyslogServerTable."
    ::= { etsysSyslogServer 1 }

etsysSyslogServerNumEntries OBJECT-TYPE
    SYNTAX      Gauge32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of entries currently in the
         etsysSyslogServerTable."
    ::= { etsysSyslogServer 2 }

etsysSyslogServerTableNextAvailableIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..8)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the numerically lowest available 
         index within this entity, which may be used for the
         value of etsysSyslogServerIndex in the creation of a
         new entry in the etsysSyslogServerTable.

         An index is considered available if the index value
         falls within the range of 1 to 8 and is not being used
         to index an existing entry in the etsysSyslogServerTable
         contained within this entity.

         A value of zero indicates that all of the entries in the
         etsysSyslogServerTable are currently in use.

         This value should only be considered a guideline for 
         management creation of etsysSyslogServerEntries, there
         is no requirement on management to create entries based
         upon this index value."
    ::= { etsysSyslogServer 3 }

-- -------------------------------------------------------------
-- etsysSyslogServer Table
-- -------------------------------------------------------------

etsysSyslogServerTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF EtsysSyslogServerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing Syslog server information."
    ::= { etsysSyslogServer 4 }

etsysSyslogServerEntry OBJECT-TYPE
    SYNTAX      EtsysSyslogServerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines the information to generate syslog messages to
         an aggregating agent or server.

         Entries within this table with an access level of read-
         create MUST be considered non-volatile and MUST be
         maintained across entity resets."
    INDEX  { etsysSyslogServerIndex }
    ::= { etsysSyslogServerTable 1 }

EtsysSyslogServerEntry ::=
    SEQUENCE {
        etsysSyslogServerIndex   
             Unsigned32,
        etsysSyslogServerDescription   
             SnmpAdminString,
        etsysSyslogServerAddressType   
             InetAddressType,
        etsysSyslogServerAddress   
             InetAddress,
        etsysSyslogServerUdpPort
             SyslogUdpPort,
        etsysSyslogServerFacility
             SyslogFacility,
        etsysSyslogServerSeverity
             SyslogSeverity,
        etsysSyslogServerMessagesIgnored
             Counter32,
        etsysSyslogServerRowStatus      
             RowStatus
    }

etsysSyslogServerIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..8)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A unique arbitrary identifier for this syslog server."
    ::= { etsysSyslogServerEntry 1 }

etsysSyslogServerDescription OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(1..64))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Administratively assigned textual description of this 
         syslog server."
    ::= { etsysSyslogServerEntry 2 }

etsysSyslogServerAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The type of Internet address by which the Syslog
         server is specified in etsysSyslogServerAddress.

         Not all address types may be supported."
    ::= { etsysSyslogServerEntry 3 }

etsysSyslogServerAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The Internet address for the Syslog message server.

         The use of DNS domain names is discouraged, and agent
         support for them is optional.  Deciding when, and how
         often, to resolve them is an issue.  Not resolving them
         often enough means you might lose synchronization with
         the associated entry in the DNS server, and resolving
         them too often might leave you without access to the
         Syslog server during critical network events."
    ::= { etsysSyslogServerEntry 4 }

etsysSyslogServerUdpPort OBJECT-TYPE
    SYNTAX      SyslogUdpPort
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The UDP port number the client is using to send requests
         to this server.

         If an entity only supports sending messages using a
         single UDP port to all servers then this may optionally
         be implemented read-only, in which case the current
         value of etsysSyslogServerDefaultUdpPort will be used."
    ::= { etsysSyslogServerEntry 5 }

etsysSyslogServerFacility OBJECT-TYPE
    SYNTAX      SyslogFacility
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The syslog facility (local0-local7) that will be encoded
         in messages sent to this server.

         If an entity only supports encoding a single facility in
         all messages to all servers then this may optionally be
         implemented read-only, in which case the current value of
         etsysSyslogServerDefaultFacility will be used."
    ::= { etsysSyslogServerEntry 6 }

etsysSyslogServerSeverity OBJECT-TYPE
    SYNTAX      SyslogSeverity
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum severity level of the messages that should
         be forwarded to the syslog server.  The higher the level,
         the lower the severity.

         If an entity only supports filtering based on a single
         severity level for all servers then this may optionally
         be implemented read-only, in which case the current value
         of etsysSyslogServerDefaultSeverity will be used."
    ::= { etsysSyslogServerEntry 7 }

etsysSyslogServerMessagesIgnored OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is a count of messages not sent to this server
         because the severity level of the message was above
         etsysSyslogServerSeverity, the higher the level,
         the lower the severity."
    ::= { etsysSyslogServerEntry 8 }

etsysSyslogServerRowStatus OBJECT-TYPE
    SYNTAX      RowStatus 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object allows for the dynamic creation and deletion
         of entries within the etsysSyslogServerTable as well as
         the activation and deactivation of these entries.

         When this object's value is set to notInService(2) this
         server will not be sent any messages, nor will any of its
         counters be incremented.

         The agent should not delete a row, except in the case of
         the loss of persistent storage.

         Refer to the RowStatus convention for further details on 
         the behavior of this object."
    REFERENCE
        "RFC2579 (Textual Conventions for SMIv2)"
    ::= { etsysSyslogServerEntry 9 }

-- -------------------------------------------------------------
-- The Syslog Server Defaults
-- -------------------------------------------------------------

etsysSyslogServerDefaultUdpPort OBJECT-TYPE
    SYNTAX      SyslogUdpPort
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The default UDP port number that the managed entity is
         using to send syslog messages.

         This value will be used as the default value for
         etsysSyslogServerUdpPort when creating rows in the
         etsysSyslogServerTable and either:

         1.)  no value is specified for etsysSyslogServerUdpPort, or

         2.)  etsysSyslogServerUdpPort is implemented read-only. 

         If etsysSyslogServerUdpPort is implemented read-only,
         and this value is changed, it should affect the UDP
         port that is used to send syslog messages to all
         servers as soon as it is practical.

         This parameter value is maintained across system reboots."
    DEFVAL  { 514 }
    ::= { etsysSyslogServer 5 }

etsysSyslogServerDefaultFacility OBJECT-TYPE
    SYNTAX      SyslogFacility
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The default syslog facility (local0-local7) that will be
         encoded in syslog messages.

         This value will be used as the default value for
         etsysSyslogServerFacility when creating rows in the
         etsysSyslogServerTable and either:

         1.)  no value is specified for etsysSyslogServerFacility, or

         2.)  etsysSyslogServerFacility is implemented read-only. 

         If etsysSyslogServerFacility is implemented read-only,
         and this value is changed, it should affect the syslog
         facility that is encoded in all syslog messages as soon
         as it is practical.

         This parameter value is maintained across system reboots."
    DEFVAL  { local7 }
    ::= { etsysSyslogServer 6 }

etsysSyslogServerDefaultSeverity OBJECT-TYPE
    SYNTAX      SyslogSeverity
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The default syslog message severity level that will be used
         to filter all syslog messages.

         This value will be used as the default value for
         etsysSyslogServerSeverity when creating rows in the
         etsysSyslogServerTable and either:

         1.)  no value is specified for etsysSyslogServerSeverity, or

         2.)  etsysSyslogServerSeverity is implemented read-only. 

         The higher the severity level, the less critical it is.

         If etsysSyslogServerSeverity is implemented read-only,
         and this value is changed, it should affect the syslog
         message severity level that will be used to filter all
         syslog messages as soon as it is practical.

         This parameter value is maintained across system reboots."
    DEFVAL  { error }
    ::= { etsysSyslogServer 7 }

-- -------------------------------------------------------------
-- etsysSyslogApplication group            
-- -------------------------------------------------------------

etsysSyslogApplicationTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF EtsysSyslogApplicationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "This is a table of applications on the managed entity
          that provide individual control over the severity level
          of the messages that they will generate."
    ::= { etsysSyslogApplication 1 }

etsysSyslogApplicationEntry OBJECT-TYPE
    SYNTAX      EtsysSyslogApplicationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An individual application that provides that ability
         to control the messages that it generates based on a
         severity level.

         MUST be considered non-volatile and MUST be maintained
         across entity resets."
    INDEX    { etsysSyslogApplicationIndex }
    ::= { etsysSyslogApplicationTable 1 }

EtsysSyslogApplicationEntry ::=
    SEQUENCE {
        etsysSyslogApplicationIndex
             Unsigned32,
        etsysSyslogApplicationDescription   
             SnmpAdminString,
        etsysSyslogApplicationMnemonic   
             SnmpAdminString,
        etsysSyslogApplicationSeverity   
             SyslogSeverity,
        etsysSyslogApplicationAllowedServers 
             BITS
    }

etsysSyslogApplicationIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A unique arbitrary identifier for this application."
    ::= { etsysSyslogApplicationEntry 1 }

etsysSyslogApplicationDescription OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(1..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Textual description of this application, assigned by
         the managed entity."
    ::= { etsysSyslogApplicationEntry 2 }

etsysSyslogApplicationMnemonic OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(1..8))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An abbreviation of the textual description for this
         application, assigned by the managed entity.

         i.e. 'STP' for 'Spanning Tree Protocol', etc.

         This provides a mapping between the textual descriptions
         and the mnemonics used in the syslog messages."
    ::= { etsysSyslogApplicationEntry 3 }

etsysSyslogApplicationSeverity OBJECT-TYPE
    SYNTAX      SyslogSeverity
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum severity level of the messages from this
         application that should be forwarded to the syslog
         client software for processing.

         The higher the severity level, the more verbose the
         messages."
    DEFVAL  { error }
    ::= { etsysSyslogApplicationEntry 4 }

etsysSyslogApplicationAllowedServers OBJECT-TYPE
    SYNTAX      BITS  {
        etsysSyslogServerIndex1(0),
        etsysSyslogServerIndex2(1),
        etsysSyslogServerIndex3(2),
        etsysSyslogServerIndex4(3),
        etsysSyslogServerIndex5(4),
        etsysSyslogServerIndex6(5),
        etsysSyslogServerIndex7(6),
        etsysSyslogServerIndex8(7)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "A list of syslog servers that will be forwarded messages logged
         by this application.  Bits in this list correspond to rows in
         the etsysSyslogServerTable. Bit positions that are set, but for
         which the corresponding etsysSyslogServerRowStatus object is
         not active, will be ignored."
    DEFVAL  { { etsysSyslogServerIndex1, etsysSyslogServerIndex2,
                etsysSyslogServerIndex3, etsysSyslogServerIndex4,
                etsysSyslogServerIndex5, etsysSyslogServerIndex6,
                etsysSyslogServerIndex7, etsysSyslogServerIndex8 } }
    ::= { etsysSyslogApplicationEntry 5 }


-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------

etsysSyslogClientConformance OBJECT IDENTIFIER 
                          ::= { etsysSyslogClientMIB 4 }

etsysSyslogClientGroups OBJECT IDENTIFIER 
                          ::= { etsysSyslogClientConformance 1 }

etsysSyslogClientCompliances OBJECT IDENTIFIER 
                          ::= { etsysSyslogClientConformance 2 }


-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------

etsysSyslogClientGroup OBJECT-GROUP
    OBJECTS {
                etsysSyslogClientMessages,
                etsysSyslogClientMessagesDropped,
                etsysSyslogClientLastMessageTime,
                etsysSyslogClientControl
            }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing syslog message
         statistics."
    ::= { etsysSyslogClientGroups 1 }

etsysSyslogServerGroup OBJECT-GROUP
    OBJECTS {
                etsysSyslogServerMaxEntries,
                etsysSyslogServerNumEntries,
                etsysSyslogServerTableNextAvailableIndex,
                etsysSyslogServerDescription,
                etsysSyslogServerAddressType,
                etsysSyslogServerAddress,
                etsysSyslogServerUdpPort,
                etsysSyslogServerFacility,
                etsysSyslogServerSeverity,
                etsysSyslogServerMessagesIgnored,
                etsysSyslogServerRowStatus
            }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing descriptions of
         syslog servers for sending system messages to."
    ::= { etsysSyslogClientGroups 2 }

etsysSyslogApplicationGroup OBJECT-GROUP
    OBJECTS {
                etsysSyslogApplicationDescription,
                etsysSyslogApplicationMnemonic,
                etsysSyslogApplicationSeverity,
                etsysSyslogApplicationAllowedServers
            }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing a mechanism to
         control the severity level of the messages individual
         application may generate."
    ::= { etsysSyslogClientGroups 3 }

etsysSyslogServerDefaultsGroup OBJECT-GROUP
    OBJECTS {
                etsysSyslogServerDefaultUdpPort,
                etsysSyslogServerDefaultFacility,
                etsysSyslogServerDefaultSeverity
            }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing default values for
         the syslog servers that can optionally be overridden
         on a per server basis with etsysSyslogServerFacility,
         etsysSyslogServerSeverity, or etsysSyslogServerUdpPort."
    ::= { etsysSyslogClientGroups 4 }


-- -------------------------------------------------------------
-- compliance statements
-- -------------------------------------------------------------

etsysSyslogClientCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for devices that support sending
         system messages to a syslog server."
    MODULE -- this module
    MANDATORY-GROUPS {
        etsysSyslogClientGroup,
        etsysSyslogServerGroup,
        etsysSyslogServerDefaultsGroup
    }

    GROUP       etsysSyslogApplicationGroup
    DESCRIPTION
        "The etsysSyslogApplication group is mandatory only for
         agents which support configuring the severity level of
         the messages that individual applications may generate."

    OBJECT      etsysSyslogClientControl
    MIN-ACCESS  read-only
    DESCRIPTION
        "Write access is not required for implementations that
         do not support configuring BOTH console AND persistent
         logging.  Implementations may choose to support only
         a subset of the client controls.  Sets which attempt
         to modify unsupported controls should fail."

    OBJECT      etsysSyslogServerUdpPort
    MIN-ACCESS  read-only
    DESCRIPTION
        "Write access is not required for implementations that
         do not support configuring the UDP port number on a
         per server basis."

    OBJECT      etsysSyslogServerFacility
    MIN-ACCESS  read-only
    DESCRIPTION
        "Write access is not required for implementations that
         do not support configuring the syslog facility on a
         per server basis."

    OBJECT      etsysSyslogServerSeverity
    MIN-ACCESS  read-only
    DESCRIPTION
        "Write access is not required for implementations that
         do not support configuring the message severity level
         on a per server basis."

    OBJECT      etsysSyslogServerDefaultUdpPort
    MIN-ACCESS  read-only
    DESCRIPTION
        "Write access is not required for implementations that
         do not support configuring the UDP port number at all,
         or do not want to support a configurable default.
         Hopefully, it is only the later."

    OBJECT      etsysSyslogServerDefaultFacility
    MIN-ACCESS  read-only
    DESCRIPTION
        "Write access is not required for implementations that
         do not support configuring the syslog facility at all,
         or do not want to support a configurable default.
         Hopefully, it is only the later."

    OBJECT      etsysSyslogServerDefaultSeverity
    MIN-ACCESS  read-only
    DESCRIPTION
        "Write access is not required for implementations that
         do not support configuring the syslog facility at all,
         or do not want to support a configurable default.
         Hopefully, it is only the later."

    OBJECT      etsysSyslogApplicationAllowedServers
    MIN-ACCESS  read-only
    DESCRIPTION
        "Write access is not required for implementations that
         do not support configuring the syslog facility at all,
         or do not support specification of allowable servers
         per application."                    

    ::= { etsysSyslogClientCompliances 1 }

END