AD | Application | AWS | Azure | Cloud | Database | Enterprise | Environmental | Event Log | File System | Infra | IoT | IT Service | Linux | Network/System | Performance | Protocol | SaaS | Security | Service Level | SNMP | Storage | VMware | VoIP | Web | Wireless

Crumbtrail

MonitorTools.com » Technical documentation » SNMP » MIB » Stratacom » CISCO-WAN-BBIF-ILMI-MIB

CISCO-WAN-BBIF-ILMI-MIB device MIB details by Stratacom

CISCO-WAN-BBIF-ILMI-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-WAN-BBIF-ILMI-MIB.


Vendor: Stratacom
Mib: CISCO-WAN-BBIF-ILMI-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools) 
-- *****************************************************************
-- CISCO-WAN-BBIF-ILMI-MIB: ILMI(Integrated Local Management Interface)
--  MIB for broad band Interface in MGX82xx series products.
--
-- December 2002, Subra Hegde
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-WAN-BBIF-ILMI-MIB DEFINITIONS ::= BEGIN
IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE, 
        Integer32,
        Counter32       FROM    SNMPv2-SMI
        MODULE-COMPLIANCE,
        OBJECT-GROUP    FROM    SNMPv2-CONF
        AtmIlmiNetworkPrefix 
                        FROM   ATM-TC-MIB
        bbIfCnf, 
        bbIfCnt         FROM    BASIS-MIB
        ciscoWan        FROM    CISCOWAN-SMI;

ciscoWanBbifIlmiMIB MODULE-IDENTITY
        LAST-UPDATED    "200212200000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                        Tel: +1 800 553-NETS

                E-mail: cs-wanatm@cisco.com"
    DESCRIPTION
        "The MIB module for ILMI configuration and 
        ILMI statistics for broad band interface ports
        in PXM1 service module. PXM1 service module is supported
        in MGX82xx series products.
        The broadband interface referred to in this mib is for
        ATM logical ports."

    REVISION    "200212200000Z"
    DESCRIPTION
        "Initial version of the MIB.

        The content of this MIB was originally available
        in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
        The applicable objects from CISCO-WAN-AXIPOP-MIB
        are defined using SMIv2 in this MIB. Also the
        descriptions of some of the objects have been 
        modified."
    ::= { ciscoWan 33 }


bbIfCnfSigILMIGrp       OBJECT IDENTIFIER ::= { bbIfCnf 2}
bbIfCntSigILMIGrp       OBJECT IDENTIFIER ::= { bbIfCnt 2}

-- **********************************************************************
--
-- bbIfCnfSigILMI group
-- Port configurable signalling parameters,
-- when the logical interface is used as a UNI port
--
-- **********************************************************************

bbIfCnfSigILMIGrpTable    OBJECT-TYPE
    SYNTAX       SEQUENCE OF BbIfCnfSigILMIGrpEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "This table contains ILMI configuration parameters
        for a broadband interface."
    ::= { bbIfCnfSigILMIGrp 1 }

bbIfCnfSigILMIGrpEntry    OBJECT-TYPE
    SYNTAX     BbIfCnfSigILMIGrpEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry for a boradband interface used as a UNI port. 
        Each entry contains ILMI configuration parameters and
        variables for a broadband interface."
    INDEX    { bbIfSigPortNum }
    ::= { bbIfCnfSigILMIGrpTable 1 }

BbIfCnfSigILMIGrpEntry ::=
    SEQUENCE {
        bbIfSigPortNum                Integer32,
        bbIfIlmiEnable                INTEGER,
        bbIfSignallingProtocolType    INTEGER, 
        bbIfSignallingVpi             Integer32, 
        bbIfSignallingVci             Integer32, 
        bbIfAddrPrefix                AtmIlmiNetworkPrefix,
        bbIfCustomerId                Integer32,
        bbIfProtocolRevNo             Integer32,
        bbIfIlmiTrapEnable            INTEGER,
        bbIfMinTrapInterval           Integer32,
        bbIfKeepAlivePollingEnable    INTEGER,
        bbIfErrorThresholdN491        Integer32,
        bbIfEventThresholdN492        Integer32,
        bbIfPollingIntervalT491       INTEGER,
        bbIfMinEnquiryIntervalT493    Integer32,
        bbIfAddrRegEnable             INTEGER
    }


bbIfSigPortNum OBJECT-TYPE
    SYNTAX     Integer32 (1..32)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION 
        "This object refers to the broadband interface.
        The value for this object is same as value specified
       in bbIfNum object from bbIfCnfGrpTable."
    REFERENCE
        "CISCO-WAN-BBIF-PORT-MIB"
    ::= { bbIfCnfSigILMIGrpEntry 1 }

bbIfIlmiEnable OBJECT-TYPE
    SYNTAX  INTEGER {
        disable (1),
        enable  (2)
    }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The logical interface is a generic entity, it can 
        be used as either a virtual trunk, or user port with 
        UNI support. 

        This variable is provided to enable/disable ILMI.

        ILMI should only be enabled on 'user ports' and not on
        'virtual trunks'
            1 - disable
            2 - enable"
    DEFVAL { disable }
    ::= { bbIfCnfSigILMIGrpEntry 2}

bbIfSignallingProtocolType  OBJECT-TYPE
    SYNTAX    INTEGER {
        other        (1),
        noSignalling (2),
        iLMI         (3)
    }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This will set the signalling protocol
         other(1)        : other
         noSignalling(2) : noSignalling
         iLMI(3)         : ILMI"
    ::= { bbIfCnfSigILMIGrpEntry 3}

bbIfSignallingVpi   OBJECT-TYPE
    SYNTAX     Integer32 (0..4095 )
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object specifies the VPI on which signalling
        cells received."
    ::= { bbIfCnfSigILMIGrpEntry 4}

bbIfSignallingVci   OBJECT-TYPE
    SYNTAX     Integer32 (0..'ffff'h )
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object specifies the VPI on which signalling
        cells received."
    ::= { bbIfCnfSigILMIGrpEntry 5}

bbIfAddrPrefix    OBJECT-TYPE
    SYNTAX     AtmIlmiNetworkPrefix   
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Network Prefix for the ATM address."
    ::= { bbIfCnfSigILMIGrpEntry 6}

bbIfCustomerId    OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This represents the customer Id."
    ::= { bbIfCnfSigILMIGrpEntry 7}
                     
bbIfProtocolRevNo    OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object represents the protocol revision number."
    ::= { bbIfCnfSigILMIGrpEntry 8}
                     
bbIfIlmiTrapEnable OBJECT-TYPE
    SYNTAX    INTEGER {
        disable (1),
        enable  (2)
    } 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object is used for enabling/disabling
        the sending of ILMI traps."
    ::= { bbIfCnfSigILMIGrpEntry 9}
                     
bbIfMinTrapInterval    OBJECT-TYPE
    SYNTAX     Integer32 (1..10)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object specifies the minimum throttling
        period of notification generation. The notificaton
        events should be suppressed by the agent until the
        current throttling period expires."
    ::= { bbIfCnfSigILMIGrpEntry 10}
                     
bbIfKeepAlivePollingEnable    OBJECT-TYPE
    SYNTAX    INTEGER {
        disable (1),
        enable  (2)
    } 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Enable/disable Keep Alive Polling."
    ::= { bbIfCnfSigILMIGrpEntry 11}
                     
bbIfErrorThresholdN491    OBJECT-TYPE
    SYNTAX     Integer32 (1..10)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object specifies Error Threshold (N491) value.
        The number of keep alive polls that must fail within
        a window of N491 polls, before the port is placed
       in the failed state. This attribute is applicable only
       when bbIfSignallingProtocolType set to iLMI(3)."
    ::= { bbIfCnfSigILMIGrpEntry 12}
                     
bbIfEventThresholdN492    OBJECT-TYPE
    SYNTAX     Integer32 (1..10)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION 
        "This object specifies Error Threshold (N492) value.
        The number of keep alive polls that must fail within
        a window of N492 polls, before the port is placed
       in the failed state. This attribute is applicable only
       when bbIfSignallingProtocolType set to iLMI(3)."
    ::= { bbIfCnfSigILMIGrpEntry 13}
                     
bbIfPollingIntervalT491    OBJECT-TYPE
    SYNTAX    INTEGER {
        v1(5),
        v2(10),
        v3(15),
        v4(20),
        v5(25),
        v6(30),
        v7(35),
        v8(40),
        v9(45),
        v10(50),
        v11(55),
        v12(60)
        }
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object specifies Polling Interval (T491) value.
        The T491 value is the number of seconds between
        each keep alive poll transmitted by port.
        This attribute is applicable only
        when bbIfSignallingProtocolType set to iLMI(3)."
    ::= { bbIfCnfSigILMIGrpEntry 14}
                     
bbIfMinEnquiryIntervalT493    OBJECT-TYPE
    SYNTAX     Integer32 (1..20)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object specifies minimum Enquiry Interval(T493)
        value. The T493 value is the number of seconds between
        each keep alive poll transmitted by port.
        This attribute is applicable only when 
        bbIfSignallingProtocolType set to iLMI(3)."
    ::= { bbIfCnfSigILMIGrpEntry 15}
                     
bbIfAddrRegEnable OBJECT-TYPE
    SYNTAX  INTEGER {
        disable (1),
        enable  (2)
    }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Enable/disable ILMI Address Registration."
    DEFVAL { disable }
    ::= { bbIfCnfSigILMIGrpEntry 16}
   
 
-- **********************************************************************
--
-- bbIfCntSigILMI group
-- ILMI and signalling counts, when the logical interface is
-- used as a UNI port
--
-- **********************************************************************

bbIfCntSigILMIGrpTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF BbIfCntSigILMIGrpEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
            "This table contains statistics related to
            ILMI."
	::= { bbIfCntSigILMIGrp 1 }

bbIfCntSigILMIGrpEntry      OBJECT-TYPE
	SYNTAX     BbIfCntSigILMIGrpEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
            "An entry for a boradband  interface used as a UNI port."
	INDEX  { sigCntBbIfNum }
    ::= { bbIfCntSigILMIGrpTable 1 }
 
BbIfCntSigILMIGrpEntry ::=
    SEQUENCE {
        sigCntBbIfNum                 Integer32,
        bbIfSnmpPduReceived           Counter32,
        bbIfGetRequestReceived        Counter32,
        bbIfGetNextRequestReceived    Counter32,
        bbIfSetRequestReceived        Counter32,
        bbIfTrapReceived              Counter32,
        bbIfGetResponseReceived       Counter32,
        bbIfGetResponseTransmitted    Counter32,
        bbIfGetRequestTransmitted     Counter32,
        bbIfTrapTransmitted           Counter32,
        bbIfInvalidPDUReceived        Counter32,
        bbIfAsn1ParseError            Counter32,
        bbIfNoSuchNameError           Counter32,
        bbIfTooBigError               Counter32,
        bbIfSigCntClrButton           INTEGER
    }

sigCntBbIfNum OBJECT-TYPE
    SYNTAX     Integer32 (1..32)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object refers to the broadband interface.
        The value for this object is same as value specified
        in bbIfSigPortNum object from bbIfCnfSigILMIGrpTable."
    ::= { bbIfCntSigILMIGrpEntry 1}

bbIfSnmpPduReceived OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
            "The number of snmp packets received on this 
            logical interface."
	::= { bbIfCntSigILMIGrpEntry 2 }

bbIfGetRequestReceived  OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
            "The number of get request messages received."
	::= { bbIfCntSigILMIGrpEntry 3 }

bbIfGetNextRequestReceived  OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
            "The number of get-next messages received."
	::= { bbIfCntSigILMIGrpEntry 4 }

bbIfSetRequestReceived  OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
            "The number of set messages received."
	::= { bbIfCntSigILMIGrpEntry 5 }

bbIfTrapReceived  OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
	    "The number of traps received."
	::= { bbIfCntSigILMIGrpEntry 6 }

bbIfGetResponseReceived OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
            "The number of Keep Alive response messages received."
	::= { bbIfCntSigILMIGrpEntry 7 }

bbIfGetResponseTransmitted  OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
            "The number of response messages transmitted."
	::= { bbIfCntSigILMIGrpEntry 8 }

bbIfGetRequestTransmitted   OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
            "The number of Keep Alive get request messages transmitted."
	::= { bbIfCntSigILMIGrpEntry 9 }

bbIfTrapTransmitted     OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
            "The number of trap messages transmitted."
	::= { bbIfCntSigILMIGrpEntry 10 }

bbIfInvalidPDUReceived  OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
	    "The number of invalid PDUs received."
	::= { bbIfCntSigILMIGrpEntry 11 }

bbIfAsn1ParseError OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
            "The number of parse errors on ASN.1."
	::= { bbIfCntSigILMIGrpEntry 12 }

bbIfNoSuchNameError     OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
            "The number of errors for name not present."
	::= { bbIfCntSigILMIGrpEntry 13 }

bbIfTooBigError     OBJECT-TYPE
	SYNTAX     Counter32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
	    "The number of messages received with len > 484."
	::= { bbIfCntSigILMIGrpEntry 14 }

bbIfSigCntClrButton OBJECT-TYPE
    SYNTAX  INTEGER {
		noAction      (1),
		resetCounters (2)
    }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Writing a value of 2 resets all the counters
        from bbIfCntSigILMIGrpTable."
    ::= { bbIfCntSigILMIGrpEntry 15 }
 
-- conformance information

cwbIlmiMIBConformance  OBJECT IDENTIFIER ::= { ciscoWanBbifIlmiMIB 2 }

cwbIlmiMIBGroups       OBJECT IDENTIFIER ::= { cwbIlmiMIBConformance 1 }

cwbIlmiMIBCompliances  OBJECT IDENTIFIER ::= { cwbIlmiMIBConformance 2 }

-- compliance statements

cwbIlmiCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for objects related
        to SRM MIB."
    MODULE  -- this module
    MANDATORY-GROUPS {
        cwbIlmiConfGroup,
        cwbIlmiStatsGroup
    }

    OBJECT bbIfCustomerId
    MIN-ACCESS read-only
    DESCRIPTION
        "For INS(Intelligent Network Server) read-write
        needs to be supported."

    OBJECT bbIfProtocolRevNo
    MIN-ACCESS read-only
    DESCRIPTION
        "For INS(Intelligent Network Server) read-write
        needs to be supported."
    ::= { cwbIlmiMIBCompliances 1 }

cwbIlmiConfGroup OBJECT-GROUP
    OBJECTS {
        bbIfSigPortNum,
        bbIfIlmiEnable,
        bbIfSignallingProtocolType,
        bbIfSignallingVpi,
        bbIfSignallingVci,
        bbIfAddrPrefix,
        bbIfCustomerId,
        bbIfProtocolRevNo,
        bbIfIlmiTrapEnable,
        bbIfMinTrapInterval,
        bbIfKeepAlivePollingEnable,
        bbIfErrorThresholdN491,
        bbIfEventThresholdN492,
        bbIfPollingIntervalT491,
        bbIfMinEnquiryIntervalT493,
        bbIfAddrRegEnable
      }
      STATUS current
      DESCRIPTION
          "The collection of objects which are used for
          configuring ILMI on broad band interface ports."
      ::= { cwbIlmiMIBGroups 1 }

cwbIlmiStatsGroup OBJECT-GROUP
    OBJECTS {
        sigCntBbIfNum,
        bbIfSnmpPduReceived,
        bbIfGetRequestReceived,
        bbIfGetNextRequestReceived,
        bbIfSetRequestReceived,
        bbIfTrapReceived,
        bbIfGetResponseReceived,
        bbIfGetResponseTransmitted,
        bbIfGetRequestTransmitted,
        bbIfTrapTransmitted,
        bbIfInvalidPDUReceived,
        bbIfAsn1ParseError,
        bbIfNoSuchNameError,
        bbIfTooBigError,
        bbIfSigCntClrButton
      }
      STATUS current
      DESCRIPTION
          "The collection of objects containing 
          the ILMI statistics on broad band interface ports."
      ::= { cwbIlmiMIBGroups 2 }

END