You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Stratacom > CISCO-WAN-SVC-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-WAN-SVC-MIB by vendor Stratacom

CISCO-WAN-SVC-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-WAN-SVC-MIB.


Vendor: Stratacom
Mib: CISCO-WAN-SVC-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- ciscoWanSvcMIB -  SVC MIB
--
-- April 2000, Wendy Cheng
--
-- Copyright (c) 1999-2003 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-WAN-SVC-MIB DEFINITIONS ::= BEGIN
 
IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    Counter32, Integer32
                        FROM SNMPv2-SMI
    DisplayString,
    RowStatus,
    TimeStamp,
    TruthValue,
    TEXTUAL-CONVENTION
                        FROM SNMPv2-TC
    MODULE-COMPLIANCE,
    OBJECT-GROUP
                        FROM SNMPv2-CONF
    ifIndex,
    InterfaceIndex
                        FROM IF-MIB
    PnniNodeId, PnniPortId
                        FROM PNNI-MIB
    AtmAddress, NetPrefix
                        FROM ATM-FORUM-TC-MIB
    CiscoWanNsapAtmAddress 
                        FROM CISCO-WAN-ATM-CONN-MIB 
    stratacom 
                        FROM CISCOWAN-SMI;
 
ciscoWANSvcMIB MODULE-IDENTITY
    LAST-UPDATED "200303100000Z"
    ORGANIZATION "Cisco System, Inc"
    CONTACT-INFO "Cisco Systems Customer Service
                Postal: 170 W Tasman Drive
                        San Jose, CA 95143
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-wanatm@cisco.com"
    DESCRIPTION
        "The MIB modules describe an ATM network service 
         on a BPX-SES or a MGX ATM switch. This MIB module 
         provides configuring, provisioning, as well as status 
         gathering for ATM services.

         Abbreviation used:

             ABR -- Available Bit Rate
             AINI -- ATM Inter-Network Interface
             ATM -- Asynchronous Transfer Mode
             BGN -- Begin
             BW  -- Bandwidth
             CBR -- Constant Bit Rate
             ENNI -- Enhanced Network to Network Interface
                  Note: The 'ENNI' term used here indicating 
                  'enhanced' or 'friendly' NNI for linking 
                  two networks of CISCO AutoRoute or PNNI 
                  switches.  The XPVCs and XPVPs are 
                  provisioned across them.  Functionality 
                  includes changing segment OAM cell handling 
                  so that these cells flow over 'end-to-end 
                  OAM segment' loops for the provisioned 
                  length of the XPVC or XPVP, i.e.  the 
                  'segment' comprises the two or three 
                  segments between the user ports. Also 
                  implemented at ENNIs is an LMI 
                  functionality that enables 
                  auto-discovery of the ENNIs.
             ER  -- Error Recovery
             GAT -- Generic Application Transport
             IE -- Information Element
             IISP -- Interim Inter-Switch Signaling Protocol
             ILMI -- Interim Local Management Interface
             MD  -- Management Data
             PNNI -- Private Network-Network Interface
             RS  -- Resynchronization
             REJ -- Rejection
             SD  -- Sequence Data
             SDP -- Sequence Data with Poll
             SPVC -- Soft Permanent Virtual Circuit
             SSCOP -- Service Specific Connection Oriented Protocol
             SVC -- Switched Virtual Circuit
             UBR -- Unspecified Bit Rate
             UD  -- Unit Data
             UNI -- User-Network Interface
             USTAT -- Unsolicited STAT
             VBR -- Variable Bit Rate"

       REVISION    "200303100000Z"
       DESCRIPTION
           "a) Modified to have characters/line to be less than 72
               and add range for Integer32.
            b) Modified to use cwspConfigGrp3 in 
               ciscoWANSvcMIBCompliance3.
           "

       REVISION    "200209160000Z"
       DESCRIPTION
           "a) Added 'cwspSpvcAddress' to cwspConfigTable."

       REVISION    "200203010000Z"
       DESCRIPTION
           "a) Added 'cwspRoutingPriority' object in cwspConfigTable.
            b) The DEFVAL clause for 'cwspUniVersion' and 
               'cwspNniVersion' is changed to 'unsupported(7)' from 
               'uni31'. The DESCRIPTION is modified for these 
               objects."

       REVISION    "200107190000Z"
       DESCRIPTION
           "The change is to back out previous revision. The 
            requirement was changed."

       REVISION    "200107060000Z"
       DESCRIPTION
           "The change is to use 'unsupoerted(7)' as default for both 
            'cwspUniVersion' and 'cwspNniVersion'. 

            DESCRIPTION modified for both variables as well."

       REVISION    "200106060000Z"
       DESCRIPTION
           "The change is to add 'self(9)' enumeration to 
            'cwspUniVersion'. This value is used to indicate 
            a voice port."

       REVISION    "200105100000Z"
       DESCRIPTION
           "The changes are as follows:
            (1) Add one mib variable 'cwspConnTraceLastNode'. 
            (2) Add 'unsupported(7)'to 'cwspNniVersion' variable. 
            (3) Add additional comments in DESCRIPTION of 
                'cwspNniVersion' and 'cwspUniVersion' variables. 
            (4) Corrected spelling error." 

       REVISION    "200010200000Z"
       DESCRIPTION
           "The changes are as follows:
            (1) Description for 'ENNI' is added.
            (2) cwspNniVersion -- enumeration enni(4) and 
                aini(5) are added.
            (3) cwspOperNniSigVersion -- enumeration aini(5) 
                is added."

       REVISION    "200009010000Z"
       DESCRIPTION
           "The changes are as follows:
            (1) The default value of cwspMinSvccVci is changed to 35.
            (2) The lower range of cwspMaxSvccVci changed to 35." 

       REVISION    "200008030000Z"
       DESCRIPTION
           "Importing symbol stratacom from CISCOWAN-SMI
            instead from BASIS-MIB."
   
       REVISION    "200006150000Z"
       DESCRIPTION
           "The changes are as follows.
            (1) The lower bound and upper bound of the following 
                MIB objects has been changed from 0 to 1 and from 
                100 to 200 respectively.

                (i)   cwspUtilFactorCbr
                (ii)  cwspUtilFactorRtVbr
                (iii) cwspUtilFactorNrtVbr
                (iv)  cwspUtilFactorAbr
                (v)   cwspUtilFactorUbr
            (2) The lower bound of cwspMinSvccVci object has been 
                changed from 32 to 0."
       REVISION     "200004010000Z"
       DESCRIPTION
           "This is the initial version of this MIB module."
       ::= { stratacom 140 } 

ciscoWANSvcMIBObjects   OBJECT IDENTIFIER 
                            ::= { ciscoWANSvcMIB 1 }
ciscoWANSvcInfo         OBJECT IDENTIFIER 
                            ::= { ciscoWANSvcMIBObjects 1 }
ciscoWANSvcPort         OBJECT IDENTIFIER 
                            ::= { ciscoWANSvcMIBObjects 2 }
ciscoWANPnniRouting     OBJECT IDENTIFIER 
                            ::= { ciscoWANSvcMIBObjects 3 }
ciscoWANSpvc            OBJECT IDENTIFIER 
                            ::= { ciscoWANSvcMIBObjects 4 }

cwspConfig      OBJECT IDENTIFIER ::= { ciscoWANSvcPort 1 }
cwspCacConfig   OBJECT IDENTIFIER ::= { ciscoWANSvcPort 2 }
cwspSigConfig   OBJECT IDENTIFIER ::= { ciscoWANSvcPort 3 }
cwspSscopConfig OBJECT IDENTIFIER ::= { ciscoWANSvcPort 4 }
cwspCallStats   OBJECT IDENTIFIER ::= { ciscoWANSvcPort 5 }
cwspSigStats    OBJECT IDENTIFIER ::= { ciscoWANSvcPort 6 }
cwspSscopStats  OBJECT IDENTIFIER ::= { ciscoWANSvcPort 7 }
cwspCall        OBJECT IDENTIFIER ::= { ciscoWANSvcPort 8 }
cwspAbrCall     OBJECT IDENTIFIER ::= { ciscoWANSvcPort 9 }
cwspPrefix      OBJECT IDENTIFIER ::= { ciscoWANSvcPort 10 }
cwspAddress     OBJECT IDENTIFIER ::= { ciscoWANSvcPort 11 }
cwspRegAddress  OBJECT IDENTIFIER ::= { ciscoWANSvcPort 12 }
cwspLoad        OBJECT IDENTIFIER ::= { ciscoWANSvcPort 13 }
cwspConnTrace   OBJECT IDENTIFIER ::= { ciscoWANSvcPort 14 }
cwspOperation   OBJECT IDENTIFIER ::= { ciscoWANSvcPort 15 }

-- TEXTUAL CONVENTIONS USED IN THIS MIB
 
CwspSpvcState ::= TEXTUAL-CONVENTION
    STATUS  current
    DESCRIPTION
        "Defines possible failures at an endpoint.
         The following are implemented: 
             genSpvcErr(1) -- General SPVC error, 
             sRecvSetupConfmMismatch(12) 
                 -- Connection ATM Conformance type 
                 -- mismatch with master at slave endpoint.
             sRecvSetupServMismatch(13)
                 -- Connection Service type mismatch with 
                 -- master at slave endpoint.
             sRecvSetupTrafParmMismatch(14),
                 -- Traffic parameters mismatch with master
                 -- at slave endpoint.  
             masterSpvcAutoDelete(15)
                 -- Controller auto deleting provisioned 
                 -- master SPVC.
         and slaveSpvcAutoDelete(16)
                 -- Controller auto deleting provisioned
                 -- slave SPVC." 

    SYNTAX  INTEGER {
        genSpvcErr(1),
        mPvcDelFail(2),
        sPvcDelFail(3),
        mRelPendHalfTmout(4),
        mInstlPvcFail(5),
        sInstlPvcFail(6),
        mRecmtPvcFail(7),
        sRecmtPvcFail(8),
        mCmtHalfFail(9),
        sCmtHalfFail(10),
        mInstlXconnFail(11),
        sRecvSetupConfmMismatch(12),
        sRecvSetupServMismatch(13),
        sRecvSetupTrafParmMismatch(14),
        masterSpvcAutoDelete(15),
        slaveSpvcAutoDelete(16)
    }

CwspControllerState ::= TEXTUAL-CONVENTION 
    STATUS  current
    DESCRIPTION
        "Defines possible state for the pnni
         controller."   
    SYNTAX  INTEGER {
        ready(1),
        unavilable(2)
    }

-- the system group

-- svc information group
cwsSwRevision OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "PNNI network controller software revision number."
    ::= { ciscoWANSvcInfo 1 }

cwsControllerStatus OBJECT-TYPE
    SYNTAX      CwspControllerState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The administrative status for the pnni active 
         controller."
    ::= { ciscoWANSvcInfo 6 }

cwspPnniStndbyControllerStatus OBJECT-TYPE
    SYNTAX      CwspControllerState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The administrative status for the standby controller."
    ::= { ciscoWANSvcInfo 7 }

cwspPnniControllerStatus OBJECT-TYPE
    SYNTAX      INTEGER { 
                    active(1),
                    stndby(2),
                    unavailable(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The administrative status of the pnni controller.
         Note: this object is only used in the trap varbind, 
         snmp get operation is meaningless." 
    ::= { ciscoWANSvcInfo 8 }

cwspPnniControllerPhySlot OBJECT-TYPE
    SYNTAX      Integer32(1..16) 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The pnni controller physical location 
         for MGX or BPX-SES. Note: this object 
         is only used in the trap varbind, snmp 
         get operation is meaningless." 
    ::= { ciscoWANSvcInfo 9 }

-- the port SSCOP configuration table
cwspSscopTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspSscopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table specifies SSCOP (Layer 2) 
         configuration parameters."
    ::= { cwspSscopConfig 1 }
 
cwspSscopEntry OBJECT-TYPE
    SYNTAX      CwspSscopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION     
        "An entry in the SSCOP configuration table. 
         Each entry indexed by the ifIndex of a port."
    INDEX { ifIndex }
    ::= { cwspSscopTable 1 }
 
CwspSscopEntry ::= SEQUENCE {
    cwspSscopTmrCC          Integer32,
    cwspSscopTmrKeepAlive   Integer32,
    cwspSscopTmrNoResp      Integer32,
    cwspSscopTmrPoll        Integer32,
    cwspSscopTmtIdle        Integer32,
    cwspSscopMaxCC          Integer32,
    cwspSscopMaxPD          Integer32,
    cwspSscopMaxSTAT        Integer32   
    }

cwspSscopTmrCC OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object contains the value for Connection 
         control timer."
    DEFVAL { 1 }
    ::= { cwspSscopEntry 1 }
 
cwspSscopTmrKeepAlive OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object contains the value for keep 
         alive timer "
    DEFVAL { 5 }
    ::= { cwspSscopEntry 2 }
 
cwspSscopTmrNoResp OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object contains the value for no 
         response timer."
    DEFVAL { 30 } 
    ::= { cwspSscopEntry 3 }

cwspSscopTmrPoll OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object contains the value for poll timer."
    DEFVAL { 1 }
    ::= { cwspSscopEntry 4 }
 
cwspSscopTmtIdle OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object contains the value for idle timer."
    DEFVAL { 10 }
    ::= { cwspSscopEntry 5 }
 
cwspSscopMaxCC OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object contains the upper limit for the number  
        of transmissions of a BGN, END, ER or RS PDU."
    DEFVAL { 10 }
    ::= { cwspSscopEntry 6 }
 
cwspSscopMaxPD OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object contains an upper limit for a counter 
        which counts the number of SD PDUs transmitted between 
        transmissions of POLL PDUs or the number of SD PDUs 
        transmitted before the transmission of the first POLL 
        PDU after POLL timer became active."
    DEFVAL { 10 }
    ::= { cwspSscopEntry 7 }
 
cwspSscopMaxSTAT OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object contains an upper limit for 
        the number of list elements placed in a 
        STAT PDU."
    DEFVAL { 67 }
    ::= { cwspSscopEntry 8 }
 
-- the port SSCOP statistics
cwspSscopStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspSscopStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains SSCOP (Layer 2) statistics 
        counters."
    ::= { cwspSscopStats 1 }
 
cwspSscopStatsEntry OBJECT-TYPE
    SYNTAX      CwspSscopStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION     
        "An entry contains SSCOP (Layer 2) statistics."
    INDEX { ifIndex }
    ::= { cwspSscopStatsTable 1 }
 
CwspSscopStatsEntry ::= SEQUENCE {
    cwspSscopCounterReset   INTEGER,
    cwspSscopIgnoredPduRcv  Counter32,
    cwspSscopBgnRcv         Counter32,
    cwspSscopBgakRcv        Counter32,
    cwspSscopEndRcv         Counter32,
    cwspSscopEndakRcv       Counter32,
    cwspSscopRsRcv          Counter32,
    cwspSscopRsakRcv        Counter32,
    cwspSscopBgrejRcv       Counter32,
    cwspSscopSdRcv          Counter32,
    cwspSscopSdpRcv         Counter32,
    cwspSscopPollRcv        Counter32,
    cwspSscopStatRcv        Counter32,
    cwspSscopUstatRcv       Counter32,
    cwspSscopUdRcv          Counter32,
    cwspSscopMdRcv          Counter32,
    cwspSscopErakRcv        Counter32,
    cwspSscopBgnXmt         Counter32,
    cwspSscopBgakXmt        Counter32,
    cwspSscopEndXmt         Counter32,
    cwspSscopEndakXmt       Counter32,
    cwspSscopRsXmt          Counter32,
    cwspSscopRsakXmt        Counter32,
    cwspSscopBgrejXmt       Counter32,
    cwspSscopSdXmt          Counter32,
    cwspSscopSdpXmt         Counter32,
    cwspSscopPollXmt        Counter32,
    cwspSscopStatXmt        Counter32,
    cwspSscopUstatXmt       Counter32,
    cwspSscopUdXmt          Counter32,
    cwspSscopMdXmt          Counter32,
    cwspSscopErakXmt        Counter32
    }   
 
cwspSscopCounterReset OBJECT-TYPE
    SYNTAX      INTEGER { 
                    noop(1), 
                    reset(2) 
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies whether the SSCOP
        statistics collected for this interface 
        needs to be reset."
    DEFVAL { noop }
    ::= { cwspSscopStatsEntry 1 }
 
cwspSscopIgnoredPduRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        PDUs that are received but ignored due to 
        incorrect size, invalid PDU, unknown PDU 
        type." 
    ::= { cwspSscopStatsEntry 2 }
 
cwspSscopBgnRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        BGN PDUs received at this interface."
    ::= { cwspSscopStatsEntry 3 }
 
cwspSscopBgakRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        BGN ACK PDUs received at this interface."
    ::= { cwspSscopStatsEntry 4 }

cwspSscopEndRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        END PDUs received at this interface."
    ::= { cwspSscopStatsEntry 5 }
 
cwspSscopEndakRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        END ACK PDUs received at this interface."
    ::= { cwspSscopStatsEntry 6 }
 
cwspSscopRsRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        RS(Resync) PDUs received at this interface."
    ::= { cwspSscopStatsEntry 7 }
 
cwspSscopRsakRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        RS(Resync) ACK PDUs received at this interface."
    ::= { cwspSscopStatsEntry 8 }
 
cwspSscopBgrejRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        BGN REJ PDUs received at this interface."
    ::= { cwspSscopStatsEntry 9 }
 
cwspSscopSdRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP
        SD (Sequenced Data) PDUs received at 
        this interface."
    ::= { cwspSscopStatsEntry 10 }
 
cwspSscopSdpRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        SDP (Sequenced Data with Poll) PDUs received
        at this interface."
    ::= { cwspSscopStatsEntry 11 }
 
cwspSscopPollRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        POLL PDUs received at this interface."
    ::= { cwspSscopStatsEntry 12 }
 
cwspSscopStatRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        STAT PDUs received at this interface."
    ::= { cwspSscopStatsEntry 13 }
 
cwspSscopUstatRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        USTAT (Unsolicited STAT) PDUs received 
        at this interface."
    ::= { cwspSscopStatsEntry 14 }
 
cwspSscopUdRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        UD (Unit data) PDUs received at this 
        interface."
    ::= { cwspSscopStatsEntry 15 }
 
cwspSscopMdRcv OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object stores the number of SSCOP 
        MD (Management data) PDUs received 
        at this interface."
    ::= { cwspSscopStatsEntry 16 }
 
cwspSscopErakRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        ER ACK (error recovery ack) PDUs received 
        at this interface."
    ::= { cwspSscopStatsEntry 17 }
 
cwspSscopBgnXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP
        BGN PDUs transmitted over this interface."
    ::= { cwspSscopStatsEntry 18 }
 
cwspSscopBgakXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        BGN ACK PDUs transmitted on this interface."
    ::= { cwspSscopStatsEntry 19 }
 
cwspSscopEndXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        END PDUs transmitted on this interface."
    ::= { cwspSscopStatsEntry 20 }
 
cwspSscopEndakXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        END ACK PDUs transmitted on this interface."
    ::= { cwspSscopStatsEntry 21 }
 
cwspSscopRsXmt  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        RS (Resync) PDUs transmitted over this 
        interface."
    ::= { cwspSscopStatsEntry 22 }
 
cwspSscopRsakXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        RS (Resync) ACK PDUs transmitted over 
        this interface."
    ::= { cwspSscopStatsEntry 23 }
 
cwspSscopBgrejXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "This object stores the number of SSCOP 
    BGN REJ PDUs transmitted over this interface."
    ::= { cwspSscopStatsEntry 24 }
 
cwspSscopSdXmt  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "This object stores the number of SSCOP 
    SD transmitted over this interface."
    ::= { cwspSscopStatsEntry 25 }
 
cwspSscopSdpXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "This object stores the number of SSCOP 
    SDP PDUs transmitted over this interface."
    ::= { cwspSscopStatsEntry 26 }
 
cwspSscopPollXmt OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
    "This object stores the number of SSCOP 
    POLL PDUs transmitted over this interface."
    ::= { cwspSscopStatsEntry 27 }
 
cwspSscopStatXmt OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
    "This object stores the number of SSCOP 
    STAT PDUs transmitted over this interface."
    ::= { cwspSscopStatsEntry 28 }
 
cwspSscopUstatXmt   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        USTAT PDUs transmitted over this interface."
    ::= { cwspSscopStatsEntry 29 }
 
cwspSscopUdXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        UD PDUs transmitted over this interface."
    ::= { cwspSscopStatsEntry 30 }
 
cwspSscopMdXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        MD PDUs transmitted over this interface."
    ::= { cwspSscopStatsEntry 31 }
 
cwspSscopErakXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object stores the number of SSCOP 
        ER(error recovery) ACK PDUs transmitted 
        over this interface."
    ::= { cwspSscopStatsEntry 32 }

-- the port signaling configuration table
cwspSigConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspSigConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table specifies signaling
        configuration parameters."
    ::= { cwspSigConfig 1 }
 
cwspSigConfigEntry OBJECT-TYPE
    SYNTAX      CwspSigConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION     
        "An entry in the signaling configuration 
        table. Each entry indexed by the ifIndex of         
        a port."
    INDEX { ifIndex }
    ::= { cwspSigConfigTable 1 }
 
CwspSigConfigEntry ::= SEQUENCE {
    cwspSigCfgT301  Integer32,
    cwspSigCfgT303  Integer32,
    cwspSigCfgT308  Integer32,  
    cwspSigCfgT310  Integer32,       
    cwspSigCfgT316  Integer32,
    cwspSigCfgT317  Integer32,    
    cwspSigCfgT322  Integer32,       
    cwspSigCfgT397  Integer32,    
    cwspSigCfgT398  Integer32,       
    cwspSigCfgT399  Integer32       
    }

cwspSigCfgT301  OBJECT-TYPE
    SYNTAX      Integer32 (150..240)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timer started when ALERT message received 
        at Call Received State. Normally, timer is 
        stopped when CONNECT message is
        received. Clear call at first expiry."
    DEFVAL { 180 }
    ::= { cwspSigConfigEntry 1 }

cwspSigCfgT303  OBJECT-TYPE
    SYNTAX      Integer32 (4..8)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timer started when SETUP message sent at 
        Call Present State. Normally, timer is 
        stopped when ALERT, CONNECT, RELEASE
        COMPLETE or CALL PROCEEDING message is 
        received. Resend SETUP message and restart 
        the timer at first expiry; Clear network
        connection and enter NULL state at second 
        expiry."
    DEFVAL { 4 }
    ::= { cwspSigConfigEntry 2 }
 
cwspSigCfgT308 OBJECT-TYPE
    SYNTAX      Integer32 (20..45)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timer started when RELEASE message sent at
        Release Indication State. Normally, timer is        
        stopped when RELEASE COMPLETE or RELEASE 
        message is received. Resend RELEASE and 
        restart the timer at first expiry; Release 
        call reference and enter NULL state at
        second expiry."
    DEFVAL { 30 }
    ::= { cwspSigConfigEntry 3 }
 
cwspSigCfgT310 OBJECT-TYPE
    SYNTAX      Integer32(10..120)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timer started when CALL PROCEEDING message 
        received at Incoming Call Proceeding State. 
        Normally, timer is stopped when ALERT,
        CONNECT or RELEASE message is received. 
        Clear call at first expiry. Range from 10 to
        20 seconds for UNI 3.0/3.1 with default
        of 10; 30 to 120 seconds for UNI 4.0 with 
        default of 30, default number can be 10 or
        30, 10 is used."
    DEFVAL { 10 }
    ::= { cwspSigConfigEntry 4 }
 
cwspSigCfgT316 OBJECT-TYPE
    SYNTAX      Integer32 (90..300)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timer started when RESTART message sent 
        Restart Request State. Normally, timer is 
        stopped when RESTART ACK message is
        received. RESTART may be sent multiple times
        in both first or second expiry."
    DEFVAL { 90 }
    ::= { cwspSigConfigEntry 5 }
 
cwspSigCfgT317 OBJECT-TYPE
    SYNTAX      Integer32 (60..300)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timer started when RESTART message received 
        at Restart State. Normally, timer is stopped when
        Internal clearing of call references happen. 
        Maintenance notification at first expiry.
        The value of this timer should be less 
        than T316."
    DEFVAL { 60 }
    ::= { cwspSigConfigEntry 6 }
 
cwspSigCfgT322 OBJECT-TYPE
    SYNTAX      Integer32 (4..20)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timer started when STATUS ENQUIRY message 
        sent at any call state. Normally, timer is
        stopped when STATUS RELEASE or
        RELEASE COMPLETE message is received. 
        STATUS ENQUIREY message may be resent several
        times in both first or second expiry."
    DEFVAL { 4 }
    ::= { cwspSigConfigEntry 7 }
 
cwspSigCfgT397 OBJECT-TYPE
    SYNTAX      Integer32 (180..240)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timer started when ALERTING or PARTY ALERTING 
        message received in point-to-multipoint call. 
        Normally timer is stopped when ADD
        PARTY ACK message is received. Clear party at 
        first expiry."
    DEFVAL { 180 }
    ::= { cwspSigConfigEntry 8 }

cwspSigCfgT398 OBJECT-TYPE
    SYNTAX      Integer32 (4..20)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timer is started when DROP PARTY message sent at Drop Party
         Initiated State. Normally, timer is stopped when DROP PARTY
         ACK or RELEASE message is received. Send DROP PARTY ACK or
         RELEASE at first expiry."
    DEFVAL     { 4 }
    ::= { cwspSigConfigEntry 9 }

cwspSigCfgT399  OBJECT-TYPE
    SYNTAX      Integer32(14..124)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timer is started when ADD PARTY message sent at 
        Add Party Initiated State. Normally, timer is 
        stopped when ADD PARTY ACK, ADD PARTY REJ or RELEASE 
        message is received. Clear the party and enter NULL Party
        State at first expiry. Range from 14 to 28 seconds for 
        UNI 3.0/3.1 with default of 14; 34
        to 124 seconds for UNI 4.0 with default of 34,
        default can be 14 or 34, 14 is used."
    DEFVAL { 14 }
    ::= { cwspSigConfigEntry 10 }


-- the port signaling statistics
cwspSigStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspSigStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains signaling statistics counters"
    ::= { cwspSigStats 1 }
 
cwspSigStatsEntry OBJECT-TYPE
    SYNTAX      CwspSigStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry contains signaling statistics."
    INDEX { ifIndex }
    ::= { cwspSigStatsTable 1 }
 
CwspSigStatsEntry ::= SEQUENCE {
    cwspSigCounterReset INTEGER,
    cwspCallProcRcv     Counter32,
    cwspConnectRcv      Counter32,
    cwspConnectAckRcv   Counter32,
    cwspSetupRcv        Counter32,
    cwspReleaseRcv      Counter32,
    cwspReleaseComplRcv Counter32,
    cwspRestartRcv      Counter32,
    cwspRestartAckRcv   Counter32,
    cwspStatusRcv       Counter32,
    cwspStatusEnqRcv    Counter32,
    cwspNotifyRcv       Counter32,
    cwspAlertRcv        Counter32,
    cwspProgressRcv     Counter32,
    cwspAddPtyRcv       Counter32,
    cwspAddPtyAckRcv    Counter32,
    cwspAddPtyRejRcv    Counter32,
    cwspDropPtyRcv      Counter32,
    cwspIncorrectMsgRcv Counter32,
    cwspTimerExpiries   Counter32,
    cwspLastCause       Counter32,
    cwspLastDiagnostic  Integer32,
    cwspCallProcXmt     Counter32,
    cwspConnectXmt      Counter32,
    cwspConnectAckXmt   Counter32,
    cwspSetupXmt        Counter32,
    cwspReleaseXmt      Counter32,
    cwspReleaseComplXmt Counter32,
    cwspRestartXmt      Counter32,
    cwspRestartAckXmt   Counter32,
    cwspStatusXmt       Counter32,
    cwspStatusEnqXmt    Counter32,
    cwspNotifyXmt       Counter32,
    cwspAlertXmt        Counter32,
    cwspProgressXmt     Counter32,
    cwspAddPtyXmt       Counter32,
    cwspAddPtyAckXmt    Counter32,
    cwspAddPtyRejXmt    Counter32,
    cwspDropPtyXmt      Counter32,
    cwspSscopStatus     INTEGER
}

cwspSigCounterReset OBJECT-TYPE
    SYNTAX      INTEGER { 
                    noop(1), -- none of following 
                    reset(2) -- resetting
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Writing a 2 to this object resets the all Sig counters."
    DEFVAL { noop }
    ::= { cwspSigStatsEntry 1 }
 
cwspCallProcRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of CALL PROCEEDING messages received 
        on this interface."
    ::= { cwspSigStatsEntry 2 }
 
cwspConnectRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of CONNECT messages received 
        on this interface."
    ::= { cwspSigStatsEntry 3 }
 
cwspConnectAckRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of CONNECT ACK messages received 
        on this interface."
    ::= { cwspSigStatsEntry 4 }
 
cwspSetupRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of SETUP messages received 
        on this interface."
    ::= { cwspSigStatsEntry 5 }

cwspReleaseRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of RELEASE messages received 
        on this interface."
    ::= { cwspSigStatsEntry 6 }
 
cwspReleaseComplRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of RELEASE COMPLETE messages received
        on this interface."
    ::= { cwspSigStatsEntry 7 }
 
cwspRestartRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of RESTART messages received 
        on this interface."
    ::= { cwspSigStatsEntry 8 }
 
cwspRestartAckRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of RESTART ACK messages received 
        on this interface."
    ::= { cwspSigStatsEntry 9 }
 
cwspStatusRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of STATUS messages received 
        on this interface."
    ::= { cwspSigStatsEntry 10 }
 
cwspStatusEnqRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of STATUS ENQUIRY messages received 
        on this interface."
    ::= { cwspSigStatsEntry 11 }
 
cwspNotifyRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of NOTIFY messages received on this interface."
    ::= { cwspSigStatsEntry 12 }
 
cwspAlertRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of ALERT messages received on this interface."
    ::= { cwspSigStatsEntry 13 }
 
cwspProgressRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of PROGRESS messages received on this interface."
    ::= { cwspSigStatsEntry 14 }
 
cwspAddPtyRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of ADD PARTY messages received on this interface."
    ::= { cwspSigStatsEntry 15 }
 
cwspAddPtyAckRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of ADD PARTY ACK messages received 
        on this interface."
    ::= { cwspSigStatsEntry 16 }

cwspAddPtyRejRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of ADD PARTY REJECT messages received 
        on this interface."
    ::= { cwspSigStatsEntry 17 }
 
cwspDropPtyRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of DROP PARTY messages received on this interface."
    ::= { cwspSigStatsEntry 18 }
 
cwspIncorrectMsgRcv OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of Incorrect messages received on this interface."
    ::= { cwspSigStatsEntry 20 }
 
cwspTimerExpiries OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of timeouts occurred on this interface."
    ::= { cwspSigStatsEntry 21 }
 
cwspLastCause OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "to indicate the last cause of release or cranckback."
    ::= { cwspSigStatsEntry 22 }
 
cwspLastDiagnostic OBJECT-TYPE
    SYNTAX      Integer32(-2147483648..214743647) 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "to indicate the last diagnostic of release or cranckback."
    ::= { cwspSigStatsEntry 23 }
 
cwspCallProcXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of CALL PROCEEDING messages transmitted from this
         interface."
    ::= { cwspSigStatsEntry 24 }
 
cwspConnectXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of CONNECT messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 25 }
 
cwspConnectAckXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of CONNECT ACK messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 26 }
 
cwspSetupXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of SETUP messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 27 }
 
cwspReleaseXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of RELEASE messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 28 }
 
cwspReleaseComplXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of RELEASE COMPLETE messages transmitted from this
        interface."
    ::= { cwspSigStatsEntry 29 }
 
cwspRestartXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of RESTART messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 30 }
 
cwspRestartAckXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of RESTART ACK messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 31 }
 
cwspStatusXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of STATUS messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 32 }
 
cwspStatusEnqXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of STATUS ENQUIRY messages transmitted from this
        interface."
    ::= { cwspSigStatsEntry 33 }
 
cwspNotifyXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of NOTIFY messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 34 }
 
cwspAlertXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of ALERT messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 35 }
 
cwspProgressXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of PROGRESS messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 36 }

cwspAddPtyXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of ADD PARTY messages transmitted from this 
        interface."
    ::= { cwspSigStatsEntry 37 }
 
cwspAddPtyAckXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of ADD PARTY ACK messages transmitted from this
        interface."
    ::= { cwspSigStatsEntry 38 }
 
cwspAddPtyRejXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of ADD PARTY REJECT messages transmitted from this
        interface."
    ::= { cwspSigStatsEntry 39 }
 
cwspDropPtyXmt OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of DROP PARTY messages transmitted 
        from this interface."
    ::= { cwspSigStatsEntry 40 }
 
cwspSscopStatus OBJECT-TYPE
    SYNTAX      INTEGER { 
                    up(1), -- sscop link is established
                    down(2) -- sscop link is tailed
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Sscop link status on an NNI interface, 
        object is meaningful along with 
        ciscoWANSscopLinkChange trap."
    ::= { cwspSigStatsEntry 42 }

-- the interface configuration table
cwspConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Interface configuration table collects 
        attributes that affect the operation of the 
        controller interface. There is a single row
        for each interface that the managed system 
        is expected to be added or managed."
    ::= { cwspConfig 1 }
 
cwspConfigEntry OBJECT-TYPE
    SYNTAX      CwspConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        " An entry in the interface configuration table containing
        information about an interface"
    INDEX { ifIndex }
    ::= { cwspConfigTable 1 }
 
CwspConfigEntry ::= SEQUENCE {
    cwspAdminStatus         INTEGER,
    cwspOperStatus          INTEGER,
    cwspSvcBlocked          TruthValue,
    cwspSpvcBlocked         TruthValue,
    cwspIlmiAddrRegEnable   TruthValue,
    cwspIlmiAutoConfEnable  TruthValue,
    cwspIlmiServRegEnable   TruthValue,
    cwspPhyIdentifier       DisplayString,
    cwspSignallingVpi       Integer32,
    cwspSignallingVci       Integer32,
    cwspRoutingVpi          Integer32,
    cwspRoutingVci          Integer32,
    cwspMaxVpiBits          Integer32,
    cwspMaxVciBits          Integer32,
    cwspUniVersion          INTEGER,
    cwspNniVersion          INTEGER,
    cwspUniType             INTEGER,
    cwspSide                INTEGER,
    cwspMaxP2pCalls         Integer32,
    cwspMaxP2mpRoots        Integer32,
    cwspMaxP2mpLeafs        Integer32,
    cwspMinSvccVpi          Integer32,
    cwspMaxSvccVpi          Integer32,
    cwspMinSvccVci          Integer32,
    cwspMaxSvccVci          Integer32,
    cwspMinSvpcVpi          Integer32,
    cwspMaxSvpcVpi          Integer32,
    cwspEnhancedIisp        TruthValue,
    cwspConfigTableRowStatus   RowStatus,
    cwspAddrPlanSupported   INTEGER,
    cwspIlmiSecureLink      TruthValue,
    cwspIlmiAttachmentPoint TruthValue,
    cwspIlmiLocalAttrStd    TruthValue,
    cwspIlmiUCSMEnable      TruthValue,
    cwspRoutingPriority     Integer32,
    cwspSpvcAddress         CiscoWanNsapAtmAddress 
}
 
cwspAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER { 
                    inService(1),
                    outService(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The administrative status of the interface. 
        inService (1) means that the interface is
        operational while outService (2) indicates 
        that the interface is put out of service by 
        the administrator."
    DEFVAL { outService }
    ::= { cwspConfigEntry 1 }
 
cwspOperStatus OBJECT-TYPE
    SYNTAX     INTEGER { 
                    ok(1), 
                    failed(2), 
                    other(3) 
               }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION     
        "The operational state of the interface. This status 
        is derived from the physical state of the interface. 
        failed (2) indicates that the interface has failed. 
        ok (1) indicates that the interface is in
        operational status, while other (3) denotes that  
        the interface is in an unknown state."
    ::= { cwspConfigEntry 2 }
 
cwspSvcBlocked OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates whether Switches virtual connections are
        allowed through this interface."
    DEFVAL { false }
    ::= { cwspConfigEntry 3 }
 
cwspSpvcBlocked OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates whether soft permanent virtual 
        connections are allowed through this interface."
    DEFVAL { false }
    ::= { cwspConfigEntry 4 }
 
cwspIlmiAddrRegEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates whether ILMI address registration is 
        enabled or disabled."
    DEFVAL { true }
    ::= { cwspConfigEntry 5 }
 
cwspIlmiAutoConfEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates whether auto-configuration of the 
        interface is turned on or off. If 
        auto-configuration is enabled, then the interface
        comes up using the ILMI auto-configuration."
    DEFVAL { true }
    ::= { cwspConfigEntry 6 }

cwspIlmiServRegEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates whether service registry is 
        enabled or disabled on the interface."
    DEFVAL { true }
    ::= { cwspConfigEntry 7 }
  
cwspPhyIdentifier OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the physical identification of the interface.  
        Mandatory when the port is provisioned for the 
        first time through SNMP."
    ::= { cwspConfigEntry 8 }
 
cwspSignallingVpi OBJECT-TYPE
    SYNTAX      Integer32 (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Denotes the Signaling VPI used on the interface."
    DEFVAL { 0 }
    ::= { cwspConfigEntry 9 }

cwspSignallingVci OBJECT-TYPE
    SYNTAX        Integer32 (0..65535)
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
        "Indicates the signaling VCI used on the 
        interface, acceptable value is 32-65535,
        and 5 being the default."
    DEFVAL  { 5 }
    ::= { cwspConfigEntry 10 }

cwspRoutingVpi  OBJECT-TYPE
    SYNTAX      Integer32 (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the VPI used for PNNI lowest level RCC."
    DEFVAL { 0 }
    ::= { cwspConfigEntry 11 }
 
cwspRoutingVci  OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the VCI used for the PNNI lowest 
        level RCC, acceptable value is 32-65535, and 
        18 being the default."
    DEFVAL { 18 }
    ::= { cwspConfigEntry 12 }
 
cwspMaxVpiBits  OBJECT-TYPE
    SYNTAX      Integer32 (0..12)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of active VPI bits on this 
        ATM Interface. For virtual interfaces (i.e. Virtual 
        Path Connections used by PNNI), this value has 
        no meaning and is set to zero."
    ::= { cwspConfigEntry 13 }

cwspMaxVciBits  OBJECT-TYPE
    SYNTAX      Integer32 (0..16)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of active VCI bits 
        on this ATM Interface."
    ::= { cwspConfigEntry 14 }
 
cwspUniVersion OBJECT-TYPE
    SYNTAX     INTEGER {
                   uni20(1),
                   uni30(2),
                   uni31(3),
                   uni40(4),
                   ituDss2(5),
                   frf4(6),
                   unsupported(7),
                   ip(8),
                   self(9)
               }
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "An indication of the latest version of the ATM Forum UNI
        Signaling Specification that is supported on this ATM
        Interface.  If this value is not present, a version of the
        UNI earlier than 3.1 is supported.

        The value of 'self(9)' indicates this entry is a voice port.

        If the peer IME's value of this object is the same as, or
        later than the local IME's value, then the version 
        corresponding to the local IME's value should be attempted.   
        Otherwise, if the peer IME's value of this object is earlier, 
        and supported locally, then the local IME should attempt the
        version corresponding to the peer IME's value. Otherwise,
        compatibility of the two IMEs  cannot be assumed."
    DEFVAL { unsupported }
    ::= { cwspConfigEntry 15 }
 
cwspNniVersion OBJECT-TYPE
    SYNTAX     INTEGER {
                   iisp30(1),
                   iisp31(2),
                   pnni10(3),
                   enni(4),
                   aini(5),
                   unsupported(7)
               }
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "An indication of the latest version of the ATM Forum
        PNNI Signaling Specification that is supported on this
        ATM Interface. Note that the PNNI routing version is not
        determined through ILMI.
        If the peer IME's value of this object is the same as,
        or later than the local IME's value, then the version
        corresponding to the local IME's value should be
        attempted.  Otherwise, if the peer IME's value of this
        object is earlier, and supported locally, then the
        local IME should attempt the version corresponding to
        the peer IME's value.  Otherwise, compatibility of the
        two IMEs cannot be assumed."
    DEFVAL { unsupported }
    ::= { cwspConfigEntry 16 }
 
cwspUniType     OBJECT-TYPE
    SYNTAX      INTEGER { public(1), private(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The type of the ATM device, either public or private."
    DEFVAL { private }
    ::= { cwspConfigEntry 17 }
 
cwspSide        OBJECT-TYPE
    SYNTAX      INTEGER { user(1), network(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object determines the type of the ATM device. This
        object is used in automatic ATM Interface-Type determination
        procedure such that a correct operational ATM Interface-type
        can be determined. An ATM End System shall take the value of
        user(1), and an ATM network node shall take the value of 
        node(2)."
    DEFVAL { network }
    ::= { cwspConfigEntry 18 }
 
cwspMaxP2pCalls OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the maximum number of point to 
        point calls (including VCs and VPs allowed 
        on the interface."
    DEFVAL { 10000 }
    ::= { cwspConfigEntry 19 }

cwspMaxP2mpRoots OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the maximum number of root VCs 
        (for point-to-multipoint) allowed on the interface."
    DEFVAL { 1000 }
    ::= { cwspConfigEntry 20 }


cwspMaxP2mpLeafs OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the maximum number of leaf VCs 
        (for point-to-multipoint) allowed on the interface."
    DEFVAL { 4095 }
    ::= { cwspConfigEntry 21 }

cwspMinSvccVpi OBJECT-TYPE
    SYNTAX      Integer32 (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the minimum SVCC VPI configured on 
        the interface."
    DEFVAL { 0 }
    ::= { cwspConfigEntry 22 }

cwspMaxSvccVpi OBJECT-TYPE
    SYNTAX      Integer32 (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the maximum SVCC VPI configured on 
        the interface."
    DEFVAL { 4095 }
    ::= { cwspConfigEntry 23 }

cwspMinSvccVci OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the minimum SVCC VCI configured on 
        the interface."
    DEFVAL { 35 }
    ::= { cwspConfigEntry 24 }

cwspMaxSvccVci OBJECT-TYPE
    SYNTAX      Integer32 (35..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the maximum SVCC VCI configured on 
        the interface."
    DEFVAL { 65535 }
    ::= { cwspConfigEntry 25 }

cwspMinSvpcVpi OBJECT-TYPE
    SYNTAX      Integer32 (1..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the minimum SVPC VPI configured on 
        the interface."
    DEFVAL { 1 }
    ::= { cwspConfigEntry 26 }

cwspMaxSvpcVpi  OBJECT-TYPE
    SYNTAX      Integer32 (1..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the maximum SVPC VPI configured on 
        the interface."
    DEFVAL { 4095 }
    ::= { cwspConfigEntry 27 }

cwspEnhancedIisp OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates whether the enhanced features for IISP 
        are enabled or disabled."
    DEFVAL { false }
    ::= { cwspConfigEntry 28 }

cwspConfigTableRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "Used to create and delete the Interface. However, only
         createAndGo, destroy, active and notInService are supported.
         NMS should only use createAndGo to create a row and destroy to
         delete a row. The managed device will either return active or
         notInService for a row status." 
    ::= { cwspConfigEntry 29 }

cwspAddrPlanSupported OBJECT-TYPE
    SYNTAX      INTEGER { both(1), aesa(2), e164(3) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The ATM address plan supported on an interface. This can 
             only be modified if interface is public UNI. For all other
             interfaces, the value is aesa."
    DEFVAL { aesa }
    ::= { cwspConfigEntry 30 }

cwspIlmiSecureLink OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates whether ILMI Secure Link Protocol is enabled or
        disabled. When secure link protocol is enabled, loss in ILMI
        connectivity is treated as loss of attachment point which 
        results in all SVCs/SVPs being released on the interface."
    DEFVAL { true }
    ::= { cwspConfigEntry 31 }

cwspIlmiAttachmentPoint OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates whether detection of loss of attachment 
        procedures are enabled on this interface. When set 
        to true, then standard ILMI procedures are employed 
        to detect loss of attachment point. If set to false, 
        then ILMI protocol on the interface does not detect 
        the loss of attachment." 
    DEFVAL { true }
    ::= { cwspConfigEntry 32 }
 
cwspIlmiLocalAttrStd OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates whether on modification of local attributes, 
        procedures as recommended by ILMI 4.0 specification 
        are followed or cisco proprietery procedures are 
        followed. When set to true, the standard ILMI procedures 
        are followed."
    DEFVAL { true }
    ::= { cwspConfigEntry 33 }
 
cwspIlmiUCSMEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates whether ILMI user connection status monitoring 
        is enabled or disabled."
    DEFVAL { true }
    ::= { cwspConfigEntry 34 }

cwspRoutingPriority OBJECT-TYPE
    SYNTAX          Integer32(1..15)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object is the routing priority to be assigned 
        to connections which enter the network from this 
        ingress interface, but does not carry the routing
        priority signaling in the SETUP message. SETUP 
        message. A default routing priority of 8 is used if 
        this object is not configured. A routing priority 1 
        is the highest priority for a user connection. 
        A connection tagged with a routing priority of 1 
        is derouted ahead of connections tagged with other 
        priority values."
    DEFVAL { 8 }
    ::= { cwspConfigEntry 35 }

cwspSpvcAddress OBJECT-TYPE
    SYNTAX      CiscoWanNsapAtmAddress  
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object identifies the internal NSAP assigned 
        to a port by the switch. 
           a) The format is that of 13-byte node prefix and
              7-byte port number. 
           b) When the switch's node prefix is modified,
              the node prefix part of this variable is also
              changed accordingly. Note: the switch's node
              prefix cannot be changed if there are 
              connections on the switch.
           c) The port number can be physical port identifier
              or the ifIndex of this port." 
        ::= { cwspConfigEntry 36 } 
 
-- the port call statistics table
cwspCallStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspCallStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This Table contains objects showing the Statistics for 
        SVC/SPVC calls on a given interface."
    ::= { cwspCallStats 1 }
 
cwspCallStatsEntry OBJECT-TYPE
    SYNTAX      CwspCallStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry contains SVC/SPVC call statistics"
    INDEX { ifIndex }
    ::= { cwspCallStatsTable 1 }
 
CwspCallStatsEntry ::= SEQUENCE {
    cwspCountReset       INTEGER,
    cwspInCallAttempts   Counter32,
    cwspInCallEstabs     Counter32,
    cwspInCallFailures   Counter32,
    cwspInFilterFailures Counter32,
    cwspInRouteFailures  Counter32,
    cwspInResrcFailures  Counter32,
    cwspInTimerFailures  Counter32,
    cwspInCrankbacks     Counter32,
    cwspOutCallAttempts  Counter32,
    cwspOutCallEstabs    Counter32,
    cwspOutCallFailures  Counter32,
    cwspOutFilterFailures Counter32,
    cwspOutRouteFailures Counter32,
    cwspOutResrcFailures Counter32,
    cwspOutTimerFailures Counter32,
    cwspOutCrankbacks    Counter32
    }

cwspCountReset  OBJECT-TYPE
    SYNTAX      INTEGER {
                    noop(1), -- none of following
                    reset(2) -- resetting
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Writing a 2 to this object resets all counters."
    DEFVAL { noop }
    ::= { cwspCallStatsEntry 1 }
 
cwspInCallAttempts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of incoming Signaling messages 
       (Setup and Add Party) received by the switching node on this 
       interface for Call establishment."
    ::= { cwspCallStatsEntry 2 }

cwspInCallEstabs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of incoming Signaling Messages 
       (Connect and Add Party Ack) received by the switching node on 
       this interface which marks that a call has been successfully 
       established."
    ::= { cwspCallStatsEntry 3 }
 
cwspInCallFailures OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the total number of incoming Point-to-Point
        (p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC call attempts 
        failed on this interface." 
    ::= { cwspCallStatsEntry 4 }
 
cwspInFilterFailures OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of incoming Point-to-Point(p2p) 
        and Point-to-MultiPoint(p2mp) SVC/SPVC call attempts which 
        failed due to address filtering on this interface."
    ::= { cwspCallStatsEntry 5 }
 
cwspInRouteFailures OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of incoming Point-to-Point(p2p) 
        and Point-to-MulitPoint(p2mp) SVC/SPVC call attempts on this
        interface which failed because there was no route to the 
        destination available."
    ::= { cwspCallStatsEntry 6 }
 
cwspInResrcFailures OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of incoming Point-to-Point(p2p) 
        and Point-to-MulitPoint(p2mp) SVC/SPVC call attempts on this
        interface which failed because there were not enough resources 
        as requested in the parameters of the call."
    ::= { cwspCallStatsEntry 7 }
 
cwspInTimerFailures OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object shows the number of signaling timers timed out for
       incoming Point-to-Point(p2p) and Point-to-MultiPoint(p2mp) 
       SVC/SPVC calls on this interface."
    ::= { cwspCallStatsEntry 8 }
 
cwspInCrankbacks OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object shows the number of Crankback IEs received on this
       interface for incoming Point-to-Point(p2p) and 
       Point-to-MultiPoint (p2mp) SVC/SPVC call attempts."
       ::= { cwspCallStatsEntry 9 }

cwspOutCallAttempts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of outgoing Signaling messages
        (Setup and Add Party) on this interface for Call
        establishment."
    ::= { cwspCallStatsEntry 10 }
 
cwspOutCallEstabs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of outgoing Signaling messages
        (Connect and Add Party Ack) which mark the call being
        established on this interface"
    ::= { cwspCallStatsEntry 11 }
 
cwspOutCallFailures OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the total number of outgoing Signaling 
        messages for Point-to-Point and Point-to-MultiPoint call 
        establishment on this interface which failed." 
    ::= { cwspCallStatsEntry 12 }
 
cwspOutFilterFailures OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of outgoing Signaling messages
        for call establishment on this interface which failed the 
        address filtering."
    ::= { cwspCallStatsEntry 13 }
 
cwspOutRouteFailures OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of outgoing Signaling messages
        for call establishment on this interface which failed because
        the route was not available."
    ::= { cwspCallStatsEntry 14 }
 
cwspOutResrcFailures OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of outgoing Signaling messages
        for call establishment on this interface which failed because
        the resource requested was not available."
    ::= { cwspCallStatsEntry 15 }
 
cwspOutTimerFailures OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of Signaling timers timed-out on
        this interface for outgoing signaling messages."
    ::= { cwspCallStatsEntry 16 }
 
cwspOutCrankbacks OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the number of Crankback IEs being sent on
        this interface for outgoing signaling Release messages. This 
        is generated on the node which generates the Crankback
        IEs."
    ::= { cwspCallStatsEntry 17 }
 
-- the port prefix table
cwspPrefixTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspPrefixEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A table specifying the network prefix(es)
        used for ILMI address registration."
    ::= { cwspPrefix 1 }
 
cwspPrefixEntry OBJECT-TYPE
    SYNTAX      CwspPrefixEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Information about a single network prefix contained
       in the prefix table."
    INDEX { ifIndex, cwspNetPrefix }
    ::= { cwspPrefixTable 1 }
 
CwspPrefixEntry ::= SEQUENCE {
    cwspNetPrefix       NetPrefix,
    cwspPrefixRowStatus RowStatus
    }

cwspNetPrefix OBJECT-TYPE
    SYNTAX      NetPrefix
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The network prefix specified for use in ILMI address
       registration."
    ::= { cwspPrefixEntry 1 }

cwspPrefixRowStatus    OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
       "Used to create, delete, activate and de-activate
       network prefixes used in ILMI address registration."
    ::= { cwspPrefixEntry 2 }

-- the port address table
cwspAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Interface ATM Address Table. This table contains all the
        attributes necessary to determine what the PNNI entity believes
        is reachable in terms of ATM End System Addresses and to
        determine which nodes are advertising this reachability. This
        table is also used to configure static routes to reachable
        addresses.  Entries in this table can be created/deleted by
        setting the intfAddressRowStatus object to appropriate values.
        Existing entries in this table cannot be modified. Entries in 
        this table can also be created/deleted through the command 
        provided by the CLI."
    ::= { cwspAddress 1 }
 
cwspAddressEntry OBJECT-TYPE
    SYNTAX      CwspAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION     
        "An entry in the table, containing information about a
        reachable address."
    INDEX { ifIndex, cwspAtmAddress, cwspAddrLen }
    ::= { cwspAddressTable 1 }
 
CwspAddressEntry ::= SEQUENCE {
    cwspAtmAddress      AtmAddress,
    cwspAddrLen         INTEGER,
    cwspAddrType        INTEGER,
    cwspAddrProto       INTEGER,
    cwspAddrPlan        INTEGER,
    cwspAddrScope       INTEGER,
    cwspAddrRedistribute TruthValue,
    cwspAddressRowStatus RowStatus
    }
 
cwspAtmAddress OBJECT-TYPE
    SYNTAX      AtmAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the ATM End System Address."
    ::= { cwspAddressEntry 1 }
 
cwspAddrLen     OBJECT-TYPE
    SYNTAX      INTEGER (0..160)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The address length in bits to be applied to the ATM End 
         System Address."
    ::= { cwspAddressEntry 2 }

cwspAddrType    OBJECT-TYPE
    SYNTAX      INTEGER { internal(1), exterior(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The type of reachability from the advertising node to the
        address. This variable indicates either this ATM address
        ('internal') is a reachable ATM destination that is directly
        attached to the logical node advertising this address or an 
        ATM address('exterior') that can be reached through a PNNI 
        routing domain but which is not located in that routing 
        domain."
    REFERENCE
        "ATM Forum PNNI 1.0 Section 5.8.1.3"
    DEFVAL  { exterior }
    ::= { cwspAddressEntry 3 }

cwspAddrProto   OBJECT-TYPE
    SYNTAX      INTEGER { local(1), static(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The routing mechanism via which the connectivity from the
        advertising node to the reachable address was learned. A 
        'local' address indicates this address is automatically
        advertised. A 'static' address is not automatically
        advertised. By setting 'cwspAddrRedistribute' variable
        (see below) to 'true' will force a 'static' address
        to be advertised." 
    DEFVAL  { local }
    ::= { cwspAddressEntry 4 }

cwspAddrPlan    OBJECT-TYPE
    SYNTAX      INTEGER { e164(1), nsap(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The address plan. For NSAP address, the first byte of the 
        address automatically implies one of the three NSAP address 
        plans: NSAP E.164, NSAP DCC or NSAP ICD."
    DEFVAL  { nsap }
    ::= { cwspAddressEntry 5 }

cwspAddrScope   OBJECT-TYPE
    SYNTAX      INTEGER (0..104)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The PNNI scope of advertisement (i.e. level of PNNI hierarchy)
        of the reachability from the advertising node to the address."
    DEFVAL  { 0 }
    ::= { cwspAddressEntry 6 }

cwspAddrRedistribute    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Whether or not the reachable address specified by this entry 
        is to be advertised by the local node into its PNNI routing 
        domain. This object is only meaningful if the routing mechanism
        (cwspAddrProto) is static."
    DEFVAL { false }
    ::= { cwspAddressEntry 7 }

cwspAddressRowStatus    OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "To create or delete a reachable address. Note that 
        NMS should use CreateAndGo to create a row and Destroy
        to delete a row. The managed device will return 
        active or notInService as row status."
    ::= { cwspAddressEntry 8 }


-- the UNI port registered address
cwspRegAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspRegAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains a list of ATM addresses that can
        be used for calls to and from a given interface by a
        switch or service.  The ATM addresses are registered by
        the endsystem via ILMI.  ILMI registered addresses
        cannot be deleted using this table. This table only
        applies to switches and network services."
    ::= { cwspRegAddress 1 }
 
cwspRegAddressEntry OBJECT-TYPE
    SYNTAX      CwspRegAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the ATM Interface Registered Address
        table."
    INDEX { ifIndex, cwspRegAtmAddress }
    ::= { cwspRegAddressTable 1 }
 
CwspRegAddressEntry ::= SEQUENCE {
    cwspRegAtmAddress         AtmAddress,
    cwspRegAddressOrgSscope   INTEGER
    }
 
cwspRegAtmAddress OBJECT-TYPE
    SYNTAX      AtmAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An address registered for a given switch or service
        interface."
    ::= { cwspRegAddressEntry 1 }
 
cwspRegAddressOrgSscope OBJECT-TYPE
    SYNTAX      INTEGER { localNetwork(1), global(15) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object indicates the organizational scope for
        the referenced address.  The information of the
        referenced address shall not be distributed outside
        the indicated scope.

        The default values for organizational scope are
        localNetwork(1) for ATM group addresses, and
        global(15) for individual addresses."
    DEFVAL  { global }
    ::= { cwspRegAddressEntry 2 }

-- the port CAC configuration Table
cwspCacConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspCacConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table specifying the CAC(Connection Admission Control)
        information for each interface."
    ::= { cwspCacConfig 1 }
 
cwspCacConfigEntry OBJECT-TYPE
    SYNTAX      CwspCacConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An entry contains CAC information." 
    INDEX { ifIndex }
    ::= { cwspCacConfigTable 1 }
 
CwspCacConfigEntry ::= SEQUENCE {
    cwspUtilFactorCbr     Integer32,
    cwspUtilFactorRtVbr   Integer32,
    cwspUtilFactorNrtVbr  Integer32,
    cwspUtilFactorAbr     Integer32,
    cwspUtilFactorUbr     Integer32,
    cwspMaxBwCbr          Integer32,
    cwspMaxBwRtVbr        Integer32,
    cwspMaxBwNrtVbr       Integer32,
    cwspMaxBwAbr          Integer32,
    cwspMaxBwUbr          Integer32,
    cwspMinBwCbr          Integer32,
    cwspMinBwRtVbr        Integer32,
    cwspMinBwNrtVbr       Integer32,
    cwspMinBwAbr          Integer32,
    cwspMinBwUbr          Integer32,
    cwspMaxVcCbr          Integer32,
    cwspMaxVcRtVbr        Integer32,
    cwspMaxVcNrtVbr       Integer32,
    cwspMaxVcAbr          Integer32,
    cwspMaxVcUbr          Integer32,
    cwspMinVcCbr          Integer32,
    cwspMinVcRtVbr        Integer32,
    cwspMinVcNrtVbr       Integer32,
    cwspMinVcAbr          Integer32,
    cwspMinVcUbr          Integer32,
    cwspMaxVcBwCbr        Integer32,
    cwspMaxVcBwRtVbr      Integer32,
    cwspMaxVcBwNrtVbr     Integer32,
    cwspMaxVcBwAbr        Integer32,
    cwspMaxVcBwUbr        Integer32,
    cwspDefaultCdvtCbr    Integer32,
    cwspDefaultCdvtRtVbr  Integer32,
    cwspDefaultCdvtNrtVbr Integer32,
    cwspDefaultCdvtAbr    Integer32,
    cwspDefaultCdvtUbr    Integer32,
    cwspDefaultMbsRtVbr   Integer32,
    cwspDefaultMbsNrtVbr  Integer32
    }
 
cwspUtilFactorCbr OBJECT-TYPE
    SYNTAX      Integer32 (1..200)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the booking factor for CBR service."
    DEFVAL { 100 }
    ::= { cwspCacConfigEntry 1 }
 
cwspUtilFactorRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (1..200)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the booking factor for real time VBR service"
    DEFVAL { 100 }
    ::= { cwspCacConfigEntry 2 }
 
cwspUtilFactorNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (1..200)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the booking factor for non-real time VBR service "
    DEFVAL { 100 }
    ::= { cwspCacConfigEntry 3 }
 
cwspUtilFactorAbr OBJECT-TYPE
    SYNTAX      Integer32 (1..200)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the booking factor for ABR service"
    DEFVAL { 100 }
    ::= { cwspCacConfigEntry 4 }
 
cwspUtilFactorUbr OBJECT-TYPE
    SYNTAX        Integer32 (1..200)
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This is the booking factor for UBR service."
    DEFVAL { 100 }
    ::= { cwspCacConfigEntry 5 }
 
cwspMaxBwCbr    OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum bandwidth for CBR service in percentage.

        The value of this variable is interpreted in the format of
        xxx.xxxx. For example a value of 750000 is interpreted
        as 75.0000%."
    DEFVAL { 1000000 }
    ::= { cwspCacConfigEntry 6 }
 
cwspMaxBwRtVbr OBJECT-TYPE
    SYNTAX     Integer32 (0..1000000)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This is the maximum bandwidth for real time VBR service in 
        percentage.

        The value of this variable is interpreted in the format of
        xxx.xxxx. For example a value of 750000 is interpreted 
        as 75.0000%."
    DEFVAL { 1000000 }
    ::= { cwspCacConfigEntry 7 }
 
cwspMaxBwNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum bandwidth for non-real time VBR service 
        in percentage.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For  example a value of 750000 is interpreted
        as 75.0000%."
    DEFVAL { 1000000 }
    ::= { cwspCacConfigEntry 8 }
 
cwspMaxBwAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum bandwidth for ABR service in percentage.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted 
        as 75.0000%."
    DEFVAL { 1000000 }
    ::= { cwspCacConfigEntry 9 }
 
cwspMaxBwUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum bandwidth for UBR service in percentage.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted
        as 75.0000%."
    DEFVAL { 1000000 }
    ::= { cwspCacConfigEntry 10 }
 
cwspMinBwCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the minimum bandwidth for CBR service in percentage.
        The total values of cwspMinBwCbr, cwspMinBwRtVbr, 
        cwspMinBwNrtVbr,  cwspMinBwAbr and cwspMinBwUbr can not exceed
        1000000, i.e. 100%.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted 
        as 75.0000%."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 11 }
 
cwspMinBwRtVbr  OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the minimum bandwidth for real time VBR service in 
        percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, 
        cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 
        1000000, i.e. 100%.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted 
        as 75.0000%."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 12 }
 
cwspMinBwNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the minimum bandwidth for non-real time VBR service 
        in percentage.
        The total values of cwspMinBwCbr, cwspMinBwRtVbr, 
        cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 
        1000000, i.e. 100%.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted
        as 75.0000%."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 13 }
 
cwspMinBwAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the minimum bandwidth for ABR service in percentage.
        The total values of cwspMinBwCbr, cwspMinBwRtVbr, 
        cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 
        1000000, i.e. 100%.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted 
        as 75.0000%."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 14 }
 
cwspMinBwUbr OBJECT-TYPE
    SYNTAX      Integer32(0..1000000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is the minimum bandwidth for UBR service in percentage. 
        The value  for this variable is always 0."
    ::= { cwspCacConfigEntry 15 }

cwspMaxVcCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum number of VCs for CBR service in 
        percentage.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted
        as 75.0000%. "
    DEFVAL { 1000000 }
    ::= { cwspCacConfigEntry 16 }
 
cwspMaxVcRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum number of VCs for real time VBR service 
        in percentage.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For  example a value of 750000 is interpreted
        as 75.0000%."
    DEFVAL { 1000000 }
    ::= { cwspCacConfigEntry 17 }
 
cwspMaxVcNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum number of VCs for non-real time VBR 
        service in percentage.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted
        as 75.0000%."
    DEFVAL { 1000000 }
    ::= { cwspCacConfigEntry 18 }
 
cwspMaxVcAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum number of VCs for ABR service in 
        percentage.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted
        as 75.0000%. "
    DEFVAL { 1000000 }
    ::= { cwspCacConfigEntry 19 }
 
cwspMaxVcUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum number of VCs for UBR service in 
        percentage.

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted
        as 75.0000%."
    DEFVAL { 1000000 }
    ::= { cwspCacConfigEntry 20 }

cwspMinVcCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the minimum number of VCs for CBR service in 
        percentage.

        The values of cwspMinVcCbr, cwspMinVcRtVbr, 
        cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 
        1000000, i.e. 100%.

        This variable is interpreted in the format of xxx.xxxx. For
        example a value of 750000 is interpreted as 75.0000%."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 21 }
 
cwspMinVcRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS      read-write
    STATUS      current
    DESCRIPTION
        "This is the minimum number of VCs for real time VBR service 
        in percentage.

        The values of cwspMinVcCbr, cwspMinVcRtVbr, 
        cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 
        1000000, i.e. 100%.
 

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted 
        as 75.0000%."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 22 }
 
cwspMinVcNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the minimum number of VCs for non-real time VBR 
        service in percentage.

        The values of cwspMinVcCbr, cwspMinVcRtVbr, 
        cwspMinVcNrtVbr,cwspMinVcAbr and cwspMinVcUbr can not exceed
        1000000, i.e. 100%.
 

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted 
        as 75.0000%."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 23 }
 
cwspMinVcAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the minimum number of VCs for ABR service in 
        percentage.

        The values of cwspMinVcCbr, cwspMinVcRtVbr, 
        cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 
        1000000, i.e. 100%.
 

        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted
        as 75.0000%."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 24 }
 
cwspMinVcUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS      read-write
    STATUS      current
    DESCRIPTION
        "This is the minimum number of VCs for UBR service in 
        percentage.

        The values of cwspMinVcCbr, cwspMinVcRtVbr, 
        cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 
        1000000, i.e. 100%.
 
        The value of this variable is interpreted in the format of 
        xxx.xxxx. For example a value of 750000 is interpreted
        as 75.0000%."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 25 }

cwspMaxVcBwCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum bandwidth allowed for a VC for real time 
        CBR service.

        The value is in the unit of cells per second."          
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 26 }
 
cwspMaxVcBwRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum bandwidth allowed for a VC for real time 
        VBR service.

        The value is in the unit of cells per second."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 27 }
 
cwspMaxVcBwNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum bandwidth allowed for a VC for non-real 
        time VBR service.

        The value is in the unit of cells per second."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 28 }
 
cwspMaxVcBwAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum bandwidth allowed for a VC for ABR 
        service.

        The value is in the unit of cells per second. "
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 29 }
 
cwspMaxVcBwUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the maximum bandwidth allowed for UBR service.

        The value is in the unit of cells per second."
    DEFVAL { 0 }
    ::= { cwspCacConfigEntry 30 }

cwspDefaultCdvtCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the default CDVT for CBR service."
    DEFVAL { 1024 }
    ::= { cwspCacConfigEntry 31 }
 
cwspDefaultCdvtRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the default CDVT real time VBR service."
    DEFVAL { 1024 }
    ::= { cwspCacConfigEntry 32 }
 
cwspDefaultCdvtNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the default CDVT non-real time VBR service."
    DEFVAL { 1024 }
    ::= { cwspCacConfigEntry 33 }
 
cwspDefaultCdvtAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the default CDVT for ABR service."
    DEFVAL { 1024 }
    ::= { cwspCacConfigEntry 34 }
 
cwspDefaultCdvtUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the default CDVT for UBR service."
    DEFVAL { 1024 }
    ::= { cwspCacConfigEntry 35 }

cwspDefaultMbsRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the default MBS real time VBR service."
    DEFVAL { 1024 }
    ::= { cwspCacConfigEntry 36 }
 
cwspDefaultMbsNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the default MBS non-real time VBR service."
    DEFVAL { 1024 }
    ::= { cwspCacConfigEntry 37 }
 
-- the port loading table
cwspLoadTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspLoadEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table specifying the load information for each
        interface."
    ::= { cwspLoad 1 }
 
cwspLoadEntry OBJECT-TYPE
    SYNTAX      CwspLoadEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry contains the load information."
    INDEX { ifIndex }
    ::= { cwspLoadTable 1 }
 
CwspLoadEntry ::= SEQUENCE {
    cwspLoadBwTotal     Integer32,
    cwspLoadMaxBwCbr    Integer32,
    cwspLoadMaxBwRtVbr  Integer32,
    cwspLoadMaxBwNrtVbr Integer32,
    cwspLoadMaxBwAbr    Integer32,
    cwspLoadMaxBwUbr    Integer32,
    cwspLoadBwAvail     Integer32,
    cwspLoadAvlBwCbr    Integer32,
    cwspLoadAvlBwRtVbr  Integer32,
    cwspLoadAvlBwNrtVbr Integer32,
    cwspLoadAvlBwAbr    Integer32,
    cwspLoadAvlBwUbr    Integer32,
    cwspLoadVcAvail     Integer32,
    cwspLoadAvlVcCbr    Integer32,
    cwspLoadAvlVcRtVbr  Integer32,
    cwspLoadAvlVcNrtVbr Integer32,
    cwspLoadAvlVcAbr    Integer32,
    cwspLoadAvlVcUbr    Integer32,
    cwspLoadCtdCbr      Integer32,
    cwspLoadCtdRtVbr    Integer32,
    cwspLoadCtdNrtVbr   Integer32,
    cwspLoadCtdAbr      Integer32,
    cwspLoadCtdUbr      Integer32,
    cwspLoadCdvCbr      Integer32,
    cwspLoadCdvRtVbr    Integer32,
    cwspLoadCdvNrtVbr   Integer32,
    cwspLoadCdvAbr      Integer32,
    cwspLoadCdvUbr      Integer32,
    cwspLoadClr0Cbr     Integer32,
    cwspLoadClr0RtVbr   Integer32,
    cwspLoadClr0NrtVbr  Integer32,
    cwspLoadClr0Abr     Integer32,
    cwspLoadClr0Ubr     Integer32,
    cwspLoadClr01Cbr    Integer32,
    cwspLoadClr01RtVbr  Integer32,
    cwspLoadClr01NrtVbr Integer32,
    cwspLoadClr01Abr    Integer32,
    cwspLoadClr01Ubr    Integer32,
    cwspLoadMinGurCrCbr Integer32,
    cwspLoadMinGurCrRtVbr  Integer32,
    cwspLoadMinGurCrNrtVbr Integer32,
    cwspLoadMinGurCrAbr Integer32,
    cwspLoadMinGurCrUbr Integer32
    }

cwspLoadBwTotal OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total bandwidth of the interface."
    ::= { cwspLoadEntry 1 }
 
cwspLoadMaxBwCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Maximum bandwith for CBR service."
    ::= { cwspLoadEntry 2 }
 
cwspLoadMaxBwRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum bandwith for real time VBR service."
    ::= { cwspLoadEntry 3 }
 
cwspLoadMaxBwNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum bandwith for non-real time VBR service."
    ::= { cwspLoadEntry 4 }
 
cwspLoadMaxBwAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum bandwith for ABR service."
    ::= { cwspLoadEntry 5 }
 
cwspLoadMaxBwUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The maximum bandwith for UBR service."
    ::= { cwspLoadEntry 6 }
 
cwspLoadBwAvail OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total available bandwidth of the interface."
    ::= { cwspLoadEntry 7 }

cwspLoadAvlBwCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The available bandwith for CBR service."
    ::= { cwspLoadEntry 8 }
 
cwspLoadAvlBwRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The available bandwith for real time VBR service."
    ::= { cwspLoadEntry 9 }
 
cwspLoadAvlBwNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The available bandwith for non-real time VBR service."
    ::= { cwspLoadEntry 10 }
 
cwspLoadAvlBwAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The available bandwith for ABR service."
    ::= { cwspLoadEntry 11 }
 
cwspLoadAvlBwUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The available bandwith for UBR service."
    ::= { cwspLoadEntry 12 }
 
cwspLoadVcAvail OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of available VCs of the interface."
    ::= { cwspLoadEntry 13 }
 
cwspLoadAvlVcCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The number of VCs used by CBR service."
    ::= { cwspLoadEntry 14 }
 
cwspLoadAvlVcRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of VCs used by real time VBR service."
    ::= { cwspLoadEntry 15 }
 
cwspLoadAvlVcNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of VCs used by non-real time VBR service."
    ::= { cwspLoadEntry 16 }
 
cwspLoadAvlVcAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of VCs used by ABR service."
    ::= { cwspLoadEntry 17 }
 
cwspLoadAvlVcUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The number of VCs used by UBR service."
    ::= { cwspLoadEntry 18 }
 
cwspLoadCtdCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The cell transfer delay of CBR service."
    ::= { cwspLoadEntry 19 }
 
cwspLoadCtdRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell transfer delay of real time VBR service."
    ::= { cwspLoadEntry 20 }
 
cwspLoadCtdNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell transfer delay of non-real time VBR service."
    ::= { cwspLoadEntry 21 }
 
cwspLoadCtdAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell transfer delay of ABR service." 
    ::= { cwspLoadEntry 22 }
 
cwspLoadCtdUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The cell transfer delay of UBR service."
    ::= { cwspLoadEntry 23 }
 
cwspLoadCdvCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The cell delay variation of CBR service."
    ::= { cwspLoadEntry 24 }
 
cwspLoadCdvRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell delay variation of real time VBR service."
    ::= { cwspLoadEntry 25 }
 
cwspLoadCdvNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell delay variation of non-real time VBR service."
    ::= { cwspLoadEntry 26 }
 
cwspLoadCdvAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell delay variation of ABR service."
    ::= { cwspLoadEntry 27 }
 
cwspLoadCdvUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The cell delay variation of UBR service."
    ::= { cwspLoadEntry 28 }
 
cwspLoadClr0Cbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The cell loss ratio-0 of CBR service, -1 implies N/A."
    ::= { cwspLoadEntry 29 }
 
cwspLoadClr0RtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell loss ratio-0 of real time VBR service, -1 implies 
        N/A."
    ::= { cwspLoadEntry 30 }
 
cwspLoadClr0NrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell loss ratio-0 of non-real time VBR service, -1 
        implies N/A."
    ::= { cwspLoadEntry 31 }
 
cwspLoadClr0Abr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell loss ratio-0 of ABR service, -1 implies N/A."
    ::= { cwspLoadEntry 32 }
 
cwspLoadClr0Ubr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The cell loss ratio-0 of UBR service, -1 implies N/A."
    ::= { cwspLoadEntry 33 }
 
cwspLoadClr01Cbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The cell loss ratio-1 of CBR service, -1 implies N/A."
    ::= { cwspLoadEntry 34 }
 
cwspLoadClr01RtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell loss ratio-1 of real time VBR service, -1 implies 
        N/A."
    ::= { cwspLoadEntry 35 }
 
cwspLoadClr01NrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell loss ratio-1 of non-real time VBR service, -1 
        implies N/A."
    ::= { cwspLoadEntry 36 }
 
cwspLoadClr01Abr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cell loss ratio-1 of ABR service, -1 implies N/A."
    ::= { cwspLoadEntry 37 }
 
cwspLoadClr01Ubr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The cell loss ratio-1 of UBR service, -1 implies N/A."
    ::= { cwspLoadEntry 38 }
 
cwspLoadMinGurCrCbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " The minimum guaranteed cell rate capacity of CBR
        service."
    ::= { cwspLoadEntry 39 }
 
cwspLoadMinGurCrRtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum guaranteed cell rate capacity of real time VBR
        service."
    ::= { cwspLoadEntry 40 }
 
cwspLoadMinGurCrNrtVbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum guaranteed cell rate capacity of non-real time 
        VBR service."
    ::= { cwspLoadEntry 41 }
 
cwspLoadMinGurCrAbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum guaranteed cell rate capacity of ABR
        service."
    ::= { cwspLoadEntry 42 }
 
cwspLoadMinGurCrUbr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current

    DESCRIPTION
        "The minimum guaranteed cell rate capacity of UBR
        service."
    ::= { cwspLoadEntry 43 }
 

-- the port call table
cwspCallTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspCallEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This Table contains the objects which show parameters 
        associated with a Point-to-Point(p2p) or Point-to-MultiPoint 
        (p2mp) SVC/SPVC call."
    ::= { cwspCall 1 }
 
cwspCallEntry OBJECT-TYPE
    SYNTAX      CwspCallEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION     
        "This object shows the multiple key index to get the Call
        record information. The key comprise of Interface Index,
        VPI/VCI value and Call Reference Value for the call."
    INDEX { ifIndex, cwspCallVpi, 
            cwspCallVci, cwspCallLeafReference }
    ::= { cwspCallTable 1 }
 
CwspCallEntry ::= SEQUENCE {
    cwspCallVpi             Integer32,
    cwspCallVci             Integer32,
    cwspCallLeafReference   Integer32,
    cwspCallCallRef         Integer32,
    cwspCallCallingAddress  AtmAddress,
    cwspCallCalledAddress   AtmAddress,
    cwspCallCallingSubAddr  AtmAddress,
    cwspCallCalledSubAddr   AtmAddress,
    cwspCallOtherIntfIndex  Integer32,
    cwspCallOtherIntfVpi    Integer32,
    cwspCallOtherIntfVci    Integer32,
    cwspCallOtherIntfCallRef Integer32,
    cwspCallType            INTEGER,
    cwspCallStartTime       TimeStamp,
    cwspCallBearerClass     INTEGER,
    cwspCallServiceCategory INTEGER,
    cwspCallCastType        INTEGER,
    cwspCallClipSusceptibility INTEGER,
    cwspCallFwdConformance  INTEGER,
    cwspCallFwdPcr          Integer32,
    cwspCallFwdScr          Integer32,
    cwspCallFwdMbs          Integer32,
    cwspCallFwdCdvt         Integer32,
    cwspCallFwdFrameDiscard INTEGER,
    cwspCallBwdConformance  INTEGER,
    cwspCallBwdPcr          Integer32,
    cwspCallBwdScr          Integer32,
    cwspCallBwdMbs          Integer32,
    cwspCallBwdCdvt         Integer32,
    cwspCallBwdFrameDiscard INTEGER,
    cwspCallMaxCtd          Integer32,
    cwspCallMaxFwdCdv       Integer32,
    cwspCallMaxFwdClr       Integer32,
    cwspCallMaxBwdCdv       Integer32,
    cwspCallMaxBwdClr       Integer32
    }
 
cwspCallVpi OBJECT-TYPE
    SYNTAX      Integer32 (0..4095)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object shows the VPI value of the call on this 
        interface."
    ::= { cwspCallEntry 1 }
 
cwspCallVci OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object shows The VCI value of the call on this interface.
         The value should be in the range of 32-65535 (0=SPVP)."
    ::= { cwspCallEntry 2 }
 
cwspCallLeafReference OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object shows the value of the Leaf Reference
         (EndPointReference) of the Call on this interface."
    ::= { cwspCallEntry 3 }
 
cwspCallCallRef OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Call Reference value of the call on 
         this interface."
    ::= { cwspCallEntry 4 }
 
cwspCallCallingAddress OBJECT-TYPE
    SYNTAX      AtmAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Calling Party Address of the call."
    ::= { cwspCallEntry 5 }
 
cwspCallCalledAddress OBJECT-TYPE
    SYNTAX      AtmAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Called Party Address of the call."
    ::= { cwspCallEntry 6 }
 
cwspCallCallingSubAddr OBJECT-TYPE
    SYNTAX      AtmAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Calling Party Subaddress of the
        call."
    ::= { cwspCallEntry 7 }
 
cwspCallCalledSubAddr OBJECT-TYPE
    SYNTAX      AtmAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Called Party Subaddress of the
        call."
    ::= { cwspCallEntry 8 }
 
cwspCallOtherIntfIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Other Interface of the call. Generally,
         this would be the outgoing/egress interface for the call."
    ::= { cwspCallEntry 9 }
 
cwspCallOtherIntfVpi OBJECT-TYPE
    SYNTAX      Integer32 (0..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the VPI of the call on the partner 
        interface."
    ::= { cwspCallEntry 10 }
 
cwspCallOtherIntfVci OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows The VCI of the call on the partner o
        interface.
        The value should be in the range of 32-65535 (0=SPVP)."
    ::= { cwspCallEntry 11 }
 
cwspCallOtherIntfCallRef OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Call Reference of the call on the 
        partner interface."
    ::= { cwspCallEntry 12 }
 
cwspCallType OBJECT-TYPE
    SYNTAX      INTEGER { svc(1), spvc(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Call Type for the call on this 
        interface.
        The call type could be SVC or SPVC."
    ::= { cwspCallEntry 13 }
 
cwspCallStartTime OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the start time of the call. This is the
         timestamp when the Setup Message (or Add Party Message) was
         first received on this interface."
    ::= { cwspCallEntry 14 }
 
cwspCallBearerClass OBJECT-TYPE
    SYNTAX      INTEGER { 
                    bcobA(1),
                    bcobC(2),
                    bcobX(3),
                    vp(4)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Bearer Class of the Call. It could be
        BcobA, BcobC, BcobX or VP Service"
    ::= { cwspCallEntry 15 }
 
cwspCallServiceCategory OBJECT-TYPE
    SYNTAX      INTEGER { 
                    cbr(1),
                    rtVbr(2),
                    nrtVbr(3),
                    abr(4),
                    ubr(5) 
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the service category of the call, which can
        be CBR, rtVBR, nrtVBR, ABR or UBR"
    ::= { cwspCallEntry 16 }
 
cwspCallCastType OBJECT-TYPE
    SYNTAX      INTEGER { 
                    p2p(1),
                    p2mp(2),
                    mp2p(3) 
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Cast Type of the call, which can be a 
        Point-to-Point (p2p), Point-to-MultiPoint (p2mp) or 
        MultiPoint-to-Point (mp2p) call."
    ::= { cwspCallEntry 17 }
 
cwspCallClipSusceptibility OBJECT-TYPE
    SYNTAX      INTEGER { yes(1), no(2) }
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "This object shows Susceptibility to Clipping. It can be
        susceptible or not susceptible."
    ::= { cwspCallEntry 18 }
 
cwspCallFwdConformance OBJECT-TYPE
    SYNTAX      INTEGER { 
                    cbr1(1), 
                    cbr2(2), 
                    cbr3(3),
                    vbr1(4), 
                    vbr2(5), 
                    vbr3(6),
                    abr(7),  
                    ubr1(8), 
                    ubr2(9) 
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the conformance of the call to the traffic
         sets in the forward direction. It can be CBR.1, CBR.2, CBR.3,
         VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in
         ATMF Traffic Management 4.0 specification."
    ::= { cwspCallEntry 19 }
 
cwspCallFwdPcr  OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object shows the Peak Cell Rate(pcr) in the forward 
        direction of the call."
    ::= { cwspCallEntry 20 }
 
cwspCallFwdScr  OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Sustainable Cell Rate(scr) in the 
        forward  direction of the call."
    ::= { cwspCallEntry 21 }
 
cwspCallFwdMbs OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Maximum Burst Size(mbs) of the call 
        in the forward direction."
    ::= { cwspCallEntry 22 }
 
cwspCallFwdCdvt OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Cell Delay Variation Tolerance(cdvt) 
        in the forward direction for the call, for PCR and SCR."
    ::= { cwspCallEntry 23 }
 
cwspCallFwdFrameDiscard OBJECT-TYPE
    SYNTAX      INTEGER { yes(1), no(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows if the Frame Discard is enabled or disabled
        in the forward direction for the call"
    ::= { cwspCallEntry 24 }
 
cwspCallBwdConformance OBJECT-TYPE
    SYNTAX      INTEGER { 
                    cbr1(1), 
                    cbr2(2), 
                    cbr3(3),
                    vbr1(4), 
                    vbr2(5), 
                    vbr3(6),
                    abr(7),  
                    ubr1(8), 
                    ubr2(9)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the conformance of the call to the traffic
        sets in the backward direction. It can be CBR.1, CBR.2, CBR.3,
        VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in
        ATMF Traffic Management 4.0 specification."
    ::= { cwspCallEntry 25 }
 
cwspCallBwdPcr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Peak Cell Rate in the backward direction
        of the call."
    ::= { cwspCallEntry 26 }
 
cwspCallBwdScr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Sustainable Cell Rate in the backward
        direction of the call."
    ::= { cwspCallEntry 27 }
 
cwspCallBwdMbs OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Maximum Burst Size of the call in the
        backward direction."
    ::= { cwspCallEntry 28 }
 
cwspCallBwdCdvt OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Cell Delay Variation Tolerance in the
        backward direction for the call, for PCR and SCR."
    ::= { cwspCallEntry 29 }
 
cwspCallBwdFrameDiscard OBJECT-TYPE
    SYNTAX      INTEGER { yes(1), no(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows if the Frame Discard is enabled or disabled
        in the backward direction for the call."
    ::= { cwspCallEntry 30 }
 
cwspCallMaxCtd OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Maximum Cell Transfer Delay for the call
        on this interface."
    ::= { cwspCallEntry 31 }
 
cwspCallMaxFwdCdv OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Maximum Cell Delay Variation in the
        forward direction for this call on this interface."
    ::= { cwspCallEntry 32 }
 
cwspCallMaxFwdClr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Maximum Cell Loss Ratio in the forward
        direction for this call on this interface."
    ::= { cwspCallEntry 33 }
 
cwspCallMaxBwdCdv OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Maximum Cell Delay Variation in the
        backward direction for this call on this interface."
    ::= { cwspCallEntry 34 }

cwspCallMaxBwdClr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Maximum Cell Loss Ratio in the backward
        direction for this call on this interface."
    ::= { cwspCallEntry 35 }
 
-- the port ABR call table
cwspAbrCallTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspAbrCallEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains information for ABR calls on an 
        interface."
    ::= { cwspAbrCall 1 }
 
cwspAbrCallEntry OBJECT-TYPE
    SYNTAX      CwspAbrCallEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION     
        "An entry in the table, containing information about an ABR 
        call."
    INDEX { ifIndex, cwspAbrCallVpi,
            cwspAbrCallVci }
    ::= { cwspAbrCallTable 1 }
 
CwspAbrCallEntry ::= SEQUENCE {
    cwspAbrCallVpi             Integer32,
    cwspAbrCallVci             Integer32,
    cwspAbrCallCallRef         Integer32,
    cwspAbrCallClgAddress      AtmAddress,
    cwspAbrCallCldAddress      AtmAddress,
    cwspAbrCallClgSubAddr      AtmAddress,
    cwspAbrCallCldSubAddr      AtmAddress,
    cwspAbrCallOtherIntfIndex  Integer32,
    cwspAbrCallOtherIntfVpi    Integer32,
    cwspAbrCallOtherIntfVci    Integer32,
    cwspAbrCallOtherIntfCallRef Integer32,
    cwspAbrCallType            INTEGER,
    cwspAbrCallStartTime       TimeStamp,
    cwspAbrCallBearerClass     INTEGER,
    cwspAbrCallServiceCategory INTEGER,
    cwspAbrCallCastType        INTEGER,
    cwspAbrCallClipSusceptibility INTEGER,
    cwspAbrCallFwdConformance  INTEGER,
    cwspAbrCallFwdPcr          Integer32,
    cwspAbrCallFwdMcr          Integer32,
    cwspAbrCallFwdIcr          Integer32,
    cwspAbrCallFwdRif          INTEGER,
    cwspAbrCallFwdRdf          INTEGER,
    cwspAbrCallFwdTbe          Integer32,
    cwspAbrCallFwdNrm          INTEGER,
    cwspAbrCallFwdTrm          INTEGER,
    cwspAbrCallFwdAdtf         Integer32,
    cwspAbrCallFwdCdf          INTEGER,
    cwspAbrCallFwdFrameDiscard INTEGER,
    cwspAbrCallBwdPcr          Integer32,
    cwspAbrCallBwdMcr          Integer32,
    cwspAbrCallBwdIcr          Integer32,
    cwspAbrCallBwdRif          INTEGER,
    cwspAbrCallBwdRdf          INTEGER,
    cwspAbrCallBwdTbe          Integer32,
    cwspAbrCallBwdNrm          INTEGER,
    cwspAbrCallBwdTrm          INTEGER,
    cwspAbrCallBwdAdtf         Integer32,
    cwspAbrCallBwdCdf          INTEGER,
    cwspAbrCallBwdFrameDiscard INTEGER,
    cwspAbrCallFrtt            Integer32,
    cwspAbrCallMaxCtd          Integer32,
    cwspAbrCallMaxFwdCdv       Integer32,
    cwspAbrCallMaxFwdClr       Integer32,
    cwspAbrCallMaxBwdCdv       Integer32,
    cwspAbrCallMaxBwdClr       Integer32
    }

cwspAbrCallVpi OBJECT-TYPE
    SYNTAX      Integer32 (0..4095)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The VPI value of the ABR call on this interface."
    ::= { cwspAbrCallEntry 1 }
 
cwspAbrCallVci OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The VCI value of the ABR call on this interface.
         The value should be in the range of 32-65535 (0=SPVP)."
    ::= { cwspAbrCallEntry 2 }
 
cwspAbrCallCallRef OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Call Reference value of the ABR call on this interface."
    ::= { cwspAbrCallEntry 3 }
 
cwspAbrCallClgAddress OBJECT-TYPE
    SYNTAX      AtmAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Calling Party Address of the ABR call."
    ::= { cwspAbrCallEntry 4 }
 
cwspAbrCallCldAddress OBJECT-TYPE
    SYNTAX      AtmAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Called Party Address of the ABR call."
    ::= { cwspAbrCallEntry 5 }
 
cwspAbrCallClgSubAddr OBJECT-TYPE
    SYNTAX      AtmAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Calling Party Subaddress of the ABR call."
    ::= { cwspAbrCallEntry 6 } 

cwspAbrCallCldSubAddr OBJECT-TYPE 
    SYNTAX      AtmAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Called Party Subaddress of the ABR call."
    ::= { cwspAbrCallEntry 7 }
 
cwspAbrCallOtherIntfIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Other Interface ID of the ABR call.  Generally this
         would be the outgoing/egress interface for the call."
    ::= { cwspAbrCallEntry 8 }
 
cwspAbrCallOtherIntfVpi OBJECT-TYPE
    SYNTAX      Integer32 (0..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The VPI value of the ABR call on the partner interface."
    ::= { cwspAbrCallEntry 9 }
 
cwspAbrCallOtherIntfVci OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The VCI value of the ABR call on the partner interface.
         The value should be in the range of 32-65535 (0=SPVP)."
    ::= { cwspAbrCallEntry 10 }

cwspAbrCallOtherIntfCallRef OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Call Reference of the ABR call on the partner interface."
    ::= { cwspAbrCallEntry 11 }
 
cwspAbrCallType OBJECT-TYPE
    SYNTAX      INTEGER { svc(1), spvc(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Call Type for the ABR call on this interface.  The call
         type could be SVC or SPVC."
    ::= { cwspAbrCallEntry 12 }
 
cwspAbrCallStartTime OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The start time of the ABR call.  This is the timestamp when
         the Setup Message (or Add Party Message) was first received
         on this interface."
    ::= { cwspAbrCallEntry 13 }
 
cwspAbrCallBearerClass OBJECT-TYPE
    SYNTAX      INTEGER { 
                    bcobA(1),
                    bcobC(2),
                    bcobX(3),
                    vp(4) 
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Bearer Class of the ABR call.  It could be BCOB-A,
         BCOB-C, BCOB-X or VP Service."
    ::= { cwspAbrCallEntry 14 }
 
cwspAbrCallServiceCategory OBJECT-TYPE
    SYNTAX      INTEGER { abr(4) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Service Category of the ABR call, which is ABR."
    ::= { cwspAbrCallEntry 15 }
 
cwspAbrCallCastType OBJECT-TYPE
    SYNTAX      INTEGER { p2p(1) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Cast Type of the ABR call, which can only be 
        Point-to-Point(p2p) call."
    ::= { cwspAbrCallEntry 16 }
 
cwspAbrCallClipSusceptibility OBJECT-TYPE
    SYNTAX      INTEGER { yes(1), no(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Susceptibility to Clipping.  It can be susceptible or 
        not susceptible."
    ::= { cwspAbrCallEntry 17 }
 
cwspAbrCallFwdConformance OBJECT-TYPE
    SYNTAX      INTEGER { abr(7) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Conformance of the ABR call to the traffic sets in the
        forward direction.  It can only be ABR as defined in ATMF
        Traffic Management 4.0 specification."
    ::= { cwspAbrCallEntry 18 }
 
cwspAbrCallFwdPcr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Peak Cell Rate for the ABR call in the forward direction."
    ::= { cwspAbrCallEntry 19 }
 
cwspAbrCallFwdMcr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Minimum Cell Rate for the ABR call in the forward 
        direction."
    ::= { cwspAbrCallEntry 20 }
 
cwspAbrCallFwdIcr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Initial Cell Rate for the ABR call in the forward 
        direction.
        This is the rate at which the source starts, both initially
        and after an idle period.  The value must not be larger than
        PCR, and is usually lower."
    ::= { cwspAbrCallEntry 21 }

cwspAbrCallFwdRif OBJECT-TYPE
    SYNTAX      INTEGER {
                    rifOneOver32768(1),
                    rifOneOver16384(2),
                    rifOneOver8192(3),
                    rifOneOver4096(4),
                    rifOneOver2048(5),
                    rifOneOver1024(6),
                    rifOneOver512(7),
                    rifOneOver256(8),
                    rifOneOver128(9),
                    rifOneOver64(10),
                    rifOneOver32(11),
                    rifOneOver16(12),
                    rifOneOver8(13),
                    rifOneOver4(14),
                    rifOneOver2(15),
                    rifOne(16)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Rate Increase Factor for the ABR call in the forward
        direction. This controls the rate at which the rate increases,
        when a backward RM-cell is received with CI=0 and NI=0.
        Larger values lead to faster rate increase. The default
        value is rifOneOver16(12)."
    ::= { cwspAbrCallEntry 22 }
 
cwspAbrCallFwdRdf OBJECT-TYPE
    SYNTAX      INTEGER {
                    rdfOneOver32768(1),
                    rdfOneOver16384(2),
                    rdfOneOver8192(3),
                    rdfOneOver4096(4),
                    rdfOneOver2048(5),
                    rdfOneOver1024(6),
                    rdfOneOver512(7),
                    rdfOneOver256(8),
                    rdfOneOver128(9),
                    rdfOneOver64(10),
                    rdfOneOver32(11),
                    rdfOneOver16(12),
                    rdfOneOver8(13),
                    rdfOneOver4(14),
                    rdfOneOver2(15),
                    rdfOne(16)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Rate Decrease Factor for the ABR call in the forward 
        direction. This controls the rate decrease which occurs
        when backward RM-cells with CI=1, are received. Larger
        values lead to faster rate decrease. The default value
        is rdfOneOver16(12)."
    ::= { cwspAbrCallEntry 23 }
 
cwspAbrCallFwdTbe OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Transient Buffer Exposure for the ABR call in the forward
        direction. This is the negotiated number of cells that the
        network would like to limit the source to sending during
        setup periods, before the first RM-cell returns."
    ::= { cwspAbrCallEntry 24 }
 
cwspAbrCallFwdNrm OBJECT-TYPE
    SYNTAX      INTEGER { 
                    nrm2(1),
                    nrm4(2),
                    nrm8(3),
                    nrm16(4),
                    nrm32(5),
                    nrm64(6),
                    nrm128(7),
                    nrm256(8)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Maximum Number of Cells a source may send for each
        forward RM-cell in the forward direction for the ABR call. 
        The default value is nrm32(5)."
    ::= { cwspAbrCallEntry 25 }
 
cwspAbrCallFwdTrm OBJECT-TYPE
    SYNTAX      INTEGER {
                    trm0point78125(1),
                    trm1point5625(2),
                    trm3point125(3),
                    trm6point25(4),
                    trm12point5(5),
                    trm25(6),
                    trm50(7),
                    trm100(8)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Upper Bound on the time between forward RM-cells in the 
        forward direction for the ABR call."
    ::= { cwspAbrCallEntry 26 }
 
cwspAbrCallFwdAdtf OBJECT-TYPE
    SYNTAX      Integer32 (1..1023)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR 
        call in the forward direction. This is the time permitted 
        between sending RM-cells before the rate is decreased to ICR.
        Range is 10 ms to 10.23 seconds. The unit is 10 msecs. For
        example, the default value of 50 corresponds to a time factor
        of 500 ms. Larger values allow a source to retain its current
        rate longer, during periods of relative inactivity.  The
        default is 50 (0.5 seconds)."
    ::= { cwspAbrCallEntry 27 }
 
cwspAbrCallFwdCdf OBJECT-TYPE
    SYNTAX      INTEGER {
                    cdf0(1),
                    cdfOneOver64(2),
                    cdfOneOver32(3),
                    cdfOneOver16(4),
                    cdfOneOver8(5),
                    cdfOneOver4(6),
                    cdfOneOver2(7),
                    cdfOne(8)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Cutoff Decrease Factor for the ABR call in the forward
         direction.  This controls the decrease in Allowed Cell Rate
         (ACR) associated with missing RM-cell count (CRM).  Larger
         values result in faster rate decrease.  The default value
         is cdfOneOver16(4)."
    ::= { cwspAbrCallEntry 28 }
 
cwspAbrCallFwdFrameDiscard OBJECT-TYPE
    SYNTAX      INTEGER { yes(1), no(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Whether Frame Discard is enabled or disabled in the forward
        direction for the ABR call."
    ::= { cwspAbrCallEntry 29 }
 
cwspAbrCallBwdPcr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Peak Cell Rate for the ABR call in the backward 
        direction."
    ::= { cwspAbrCallEntry 30 }
 
cwspAbrCallBwdMcr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Minimum Cell Rate for the ABR call in the backward 
        direction."
    ::= { cwspAbrCallEntry 31 }
 
cwspAbrCallBwdIcr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Initial Cell Rate for the ABR call in the backward 
        direction.
        This is the rate at which the source starts, both initially
        and after an idle period.  The value must not be larger than
        PCR, and is usually lower."
    ::= { cwspAbrCallEntry 32 }

cwspAbrCallBwdRif OBJECT-TYPE
    SYNTAX      INTEGER {
                    rifOneOver32768(1),
                    rifOneOver16384(2),
                    rifOneOver8192(3),
                    rifOneOver4096(4),
                    rifOneOver2048(5),
                    rifOneOver1024(6),
                    rifOneOver512(7),
                    rifOneOver256(8),
                    rifOneOver128(9),
                    rifOneOver64(10),
                    rifOneOver32(11),
                    rifOneOver16(12),
                    rifOneOver8(13),
                    rifOneOver4(14),
                    rifOneOver2(15),
                    rifOne(16)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Rate Increase Factor for the ABR call in the backward
         direction. This controls the rate at which the rate increases,
         when a forward RM-cell is received with CI=0 and NI=0.
         Larger values lead to faster rate increase. The default
         value is rifOneOver16(12)."
    ::= { cwspAbrCallEntry 33 }
 
cwspAbrCallBwdRdf OBJECT-TYPE
    SYNTAX      INTEGER {
                    rdfOneOver32768(1),
                    rdfOneOver16384(2),
                    rdfOneOver8192(3),
                    rdfOneOver4096(4),
                    rdfOneOver2048(5),
                    rdfOneOver1024(6),
                    rdfOneOver512(7),
                    rdfOneOver256(8),
                    rdfOneOver128(9),
                    rdfOneOver64(10),
                    rdfOneOver32(11),
                    rdfOneOver16(12),
                    rdfOneOver8(13),
                    rdfOneOver4(14),
                    rdfOneOver2(15),
                    rdfOne(16)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Rate Decrease Factor for the ABR call in the backward 
        direction. This controls the rate decrease which occurs
        when forward RM-cells with CI=1, are received. Larger
        values lead to faster rate decrease. The default value
        is rdfOneOver16(12)."
    ::= { cwspAbrCallEntry 34 }
 
cwspAbrCallBwdTbe OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Transient Buffer Exposure for the ABR call in the backward
        direction. This is the negotiated number of cells that the
        network would like to limit the source to sending during
        setup periods, before the first RM-cell returns."
    ::= { cwspAbrCallEntry 35 }
 
cwspAbrCallBwdNrm OBJECT-TYPE
    SYNTAX      INTEGER { 
                    nrm2(1),
                    nrm4(2),
                    nrm8(3),
                    nrm16(4),
                    nrm32(5),
                    nrm64(6),
                    nrm128(7),
                    nrm256(8)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Maximum Number of Cells a source may send for each forward
        RM-cell in the backward direction for the ABR call. The default
        value is nrm32(5)."
    ::= { cwspAbrCallEntry 36 }
 
cwspAbrCallBwdTrm OBJECT-TYPE
    SYNTAX      INTEGER {
                    trm0point78125(1),
                    trm1point5625(2),
                    trm3point125(3),
                    trm6point25(4),
                    trm12point5(5),
                    trm25(6),
                    trm50(7),
                    trm100(8)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Upper Bound on the time between forward RM-cells in the 
        backward direction for the ABR call."
    ::= { cwspAbrCallEntry 37 }
 
cwspAbrCallBwdAdtf OBJECT-TYPE
    SYNTAX      Integer32 (1..1023)
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR 
        call in the backward direction. This is the time permitted 
        between sending RM-cells before the rate is decreased to ICR.
        Range is 10 ms to 10.23 seconds. The unit is 10 msecs. For
        example, the default value of 50 corresponds to a time factor
        of 500 ms. Larger values allow a source to retain its current
        rate longer, during periods of relative inactivity. The
        default is 50 (0.5 seconds)."
    ::= { cwspAbrCallEntry 38 }
 
cwspAbrCallBwdCdf OBJECT-TYPE
    SYNTAX      INTEGER {
                    cdf0(1),
                    cdfOneOver64(2),
                    cdfOneOver32(3),
                    cdfOneOver16(4),
                    cdfOneOver8(5),
                    cdfOneOver4(6),
                    cdfOneOver2(7),
                    cdfOne(8)
                }
    MAX-ACCESS      read-only
    STATUS      current
    DESCRIPTION
        "The Cutoff Decrease Factor for the ABR call in the backward
        direction.  This controls the decrease in Allowed Cell Rate
        (ACR) associated with missing RM-cell count (CRM).  Larger
        values result in faster rate decrease.  The default value
        is cdfOneOver16(4)."
    ::= { cwspAbrCallEntry 39 }
 
cwspAbrCallBwdFrameDiscard OBJECT-TYPE
    SYNTAX      INTEGER { yes(1), no(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Whether Frame Discard is enabled or disabled in the backward
        direction for the ABR call."
    ::= { cwspAbrCallEntry 40 }
 
cwspAbrCallFrtt OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Fixed Round-Trip Time for the ABR call.  This is the sum
        of the fixed and propagation delays from the source to the
        furthest destination and back."
    ::= { cwspAbrCallEntry 41 }
 
cwspAbrCallMaxCtd OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Maximum Cell Transfer Delay for the ABR call on this 
        interface."
    ::= { cwspAbrCallEntry 42 }
 
cwspAbrCallMaxFwdCdv OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Maximum Cell Delay Variation in the forward direction
        for the ABR call on this interface."
    ::= { cwspAbrCallEntry 43 }
 
cwspAbrCallMaxFwdClr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Maximum Cell Loss Ratio in the forward direction for
        the ABR call on this interface."
    ::= { cwspAbrCallEntry 44 }
 
cwspAbrCallMaxBwdCdv OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Maximum Cell Delay Variation in the backward direction
        for the ABR call on this interface."
    ::= { cwspAbrCallEntry 45 }
 
cwspAbrCallMaxBwdClr OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Maximum Cell Loss Ratio in the backward direction for
         the ABR call on this interface."
    ::= { cwspAbrCallEntry 46 }


-- the following cswpConnTrace group is used to trace SVC 
-- connection in the pnni network. The NMS can fire up the 
-- action providing that the connection is active.
 
-- the port connection trace group
cwspConnTraceAvail   OBJECT-TYPE
    SYNTAX      Integer32(1..100)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object tells the number of calls can be traced 
        concurrently.

        Depending on the system resource, this object may vary sometime
        to time.

        NMS should query this object to ensure there is system resource
        available before creating a row in the cwspConnTraceCntlTable."
    ::= { cwspConnTrace 1 }
 
cwspConnTraceNextIndex   OBJECT-TYPE
    SYNTAX      Integer32(1..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "When creating a row in the cwspConnTraceCntlTable, NMS should
        query this object to obtain the index value to be used for row
        creation."
    ::= { cwspConnTrace 2 }


-- the port connection trace control table
cwspConnTraceCntlTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspConnTraceCntlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This Table contains the objects which control the creation of
        connection trace for the existing SVC call. "
    ::= { cwspConnTrace 3 }
 
 
cwspConnTraceCntlEntry OBJECT-TYPE
    SYNTAX      CwspConnTraceCntlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION     
        "This object controls the connection trace creation.
        NMS needs to acquire the next index available to create
        a row.  In addition, NMS needs to provide all read-create
        objects in the same pdu with RowStatus to be CreateAndGo."
    INDEX { cwspConnTraceIndex }
    ::= { cwspConnTraceCntlTable 1 }
 
CwspConnTraceCntlEntry ::= SEQUENCE {
    cwspConnTraceIndex       Integer32,
    cwspConnTraceifIndex     InterfaceIndex,
    cwspConnTraceSrcVpi      Integer32,
    cwspConnTraceSrcVci      Integer32,
    cwspConnTraceType        INTEGER,
    cwspConnTraceCallRef     Integer32,
    cwspConnTraceLeafRef     Integer32,
    cwspConnTraceDestVpi     Integer32,
    cwspConnTraceDestVci     Integer32,
    cwspConnTraceDestCallRef   Integer32,
    cwspConnTraceResultStatus  INTEGER,
    cwspConnTraceQueryStatus   RowStatus
}


cwspConnTraceIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Index to a row of connection trace."  
    ::= { cwspConnTraceCntlEntry 1 }
 
cwspConnTraceifIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The 'ifIndex' indicates the port to a trace connection."
    ::= { cwspConnTraceCntlEntry 2 }
 
 
cwspConnTraceSrcVpi OBJECT-TYPE
    SYNTAX      Integer32 (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object shows the VPI value of the starting point on
       this interface."
    ::= { cwspConnTraceCntlEntry 3 }
 
cwspConnTraceSrcVci OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object shows The VCI value of the starting point on
       this interface.
       The value should be in the range of 32-65535 (0=SPVP)."
    ::= { cwspConnTraceCntlEntry 4 }
 
cwspConnTraceType OBJECT-TYPE
    SYNTAX      INTEGER { p2p(1), p2mp(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Setting this object to either p2p or p2mp to specify 
       tracing a p2p or p2mp connection."
    ::= { cwspConnTraceCntlEntry 5 }
 
cwspConnTraceCallRef OBJECT-TYPE
    SYNTAX      Integer32(0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object shows the Call Reference value of the call on
       this interface."
    ::= { cwspConnTraceCntlEntry 6 }
 
cwspConnTraceLeafRef    OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object shows the value of the Leaf Reference
       (EndPointReference) of the Call on this interface, 
       this value is  used to support p2mp call trace.  
       For p2p call, this value should be set as 0 by NMS."
    ::= { cwspConnTraceCntlEntry 7 }
 
 
cwspConnTraceDestVpi OBJECT-TYPE
    SYNTAX      Integer32(0..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object shows the endpoint VPI value of the call on
       this interface."
    ::= { cwspConnTraceCntlEntry 8 }
 
cwspConnTraceDestVci OBJECT-TYPE
    SYNTAX      Integer32(0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object shows the endpoint VCI value of the call on
       this interface."
    ::= { cwspConnTraceCntlEntry 9 }

cwspConnTraceDestCallRef OBJECT-TYPE
    SYNTAX      Integer32(0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object shows the endpoint call reference on
       this interface."
    ::= { cwspConnTraceCntlEntry 10 }

cwspConnTraceResultStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    traceInProgress(1),
                    traceCompleted(2),
                    traceIncompleted(3),
                    traceExceededLength(4),
                    traceContRefused(5),
                    traceLackResource(6)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object shows the result of tracing the call.  
       NMS should get positive result (i.e. traceCompleted) for 
       this attribute before query the cwspConnTraceTable."
    ::= { cwspConnTraceCntlEntry 11 }
 
 
cwspConnTraceQueryStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object used to manage rows in this table. However, 
       only CreateAndGo, NotInService, Active, and Destroy are 
       start up the trace. To remove a row, NMS set this value 
       to Destroy.
       The managed device will either return Active or 
       NotInService."
    ::= { cwspConnTraceCntlEntry 12 }
 
-- the port connection data table
cwspConnTraceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspConnTraceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table contains the objects which show the traversed 
       node information in the existing SVC call. "
    ::= { cwspConnTrace 4 }
 
cwspConnTraceEntry OBJECT-TYPE
    SYNTAX      CwspConnTraceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION     
       "A conceptual row of the cwspConnTraceTable used to return
       information about all the nodes belongs to the connection
       which search criteria is corresponding to instance of the
       cwspConnTraceCntlTable. "
    INDEX { cwspConnTraceIndex, cwspConnTraceDataIndex }
    ::= { cwspConnTraceTable 1 }
 
CwspConnTraceEntry ::= SEQUENCE {
    cwspConnTraceDataIndex       Integer32,
    cwspConnTraceNodeId          PnniNodeId,
    cwspConnTraceEgressPortId    PnniPortId,
    cwspConnTraceEgressVpi       Integer32,
    cwspConnTraceEgressVci       Integer32,
    cwspConnTraceEgressCallRef   Integer32,
    cwspConnTraceEgressPhyPortId OCTET STRING,
    cwspConnTraceLastNode        TruthValue
    }
 
 
cwspConnTraceDataIndex OBJECT-TYPE
    SYNTAX      Integer32(1..100)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Along with cwspConnTraceIndex, this object specified an 
       unique entry in the cwspConnTraceTable."
    ::= { cwspConnTraceEntry 1 }
 
cwspConnTraceNodeId OBJECT-TYPE
    SYNTAX      PnniNodeId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This octet string represents 22 bytes nodeId in the 
        traced connection."
    ::= { cwspConnTraceEntry 2 }
 
cwspConnTraceEgressPortId OBJECT-TYPE
    SYNTAX      PnniPortId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object represents 4 bytes logical port ID of the
        traversed node.
        When 0 is specified, the destination node for the trace is 
        reached."
    ::= { cwspConnTraceEntry 3 }
  
cwspConnTraceEgressVpi OBJECT-TYPE
    SYNTAX      Integer32(0..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Egress port's VPI value for the traced
        connection."
    ::= { cwspConnTraceEntry 4 }
 
 
cwspConnTraceEgressVci OBJECT-TYPE
    SYNTAX      Integer32(0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Egress port's VCI value for the traced
        connection"
    ::= { cwspConnTraceEntry 5 }
 
 
cwspConnTraceEgressCallRef OBJECT-TYPE
    SYNTAX      Integer32(0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Egress port's call reference."
    ::= { cwspConnTraceEntry 6 }
 
cwspConnTraceEgressPhyPortId OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(8))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object shows the Egress port's physical port Identifier
        for the traversed node; if this object is 0 meaning that the
        destination node for the traced connection has been reached. 
        the meaning for the bytes are:
        first byte -- flag (used by CLI to decode the rest of bytes )
        2nd  byte -- shelf
        3rd & 4th bytes -- slot
        5th  byte -- subslot
        6th & 7th bytes -- port
        8th  byte -- subport
        "
    ::= { cwspConnTraceEntry 7 }

cwspConnTraceLastNode OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This value indicates if this entry contains the information
         about the last node where this trace ends. 

         If it is the last node, this value is 'true(1)' or 
         it is 'false(2)'. "
    ::= { cwspConnTraceEntry 8 }
 

-- the PNNI routing group
-- This group is created for PNNI notifications (traps) to use

ciscoWANPnniLinkStatus OBJECT-TYPE
    SYNTAX      INTEGER { 
                    in2win(1),   -- in 2-Way Inside state
                    out2win(2),  -- out of 2-Way Inside
                    in2wout(3),  -- in 2-Way Outside state
                    out2wout(4), -- out of 2-Way Outside
                    inCout(5),   -- in Common Outside state
                    outCout(6) } -- out of Common Outside
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the status of a link has changed:
            1 - the link entered the 2-Way Inside state,
            2 - the link exit the 2-Way Inside state,
            3 - the link entered the 2-Way Outside state,
            4 - the link exit the 2-Way Outside state.
            5 - the link entered the Common Outside state, or
            6 - the link exit the Common Outside state and entered
                the 1-Way Outside state."
    ::= { ciscoWANPnniRouting 1 }

ciscoWANPnniPglStatus OBJECT-TYPE
    SYNTAX      INTEGER { ok(1), hung(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the status of PGL process has changed:
            1 - the PGL exit the hung-election state, or
            2 - the PGL entered the hung-election state."
    ::= { ciscoWANPnniRouting 2 }

ciscoWANPnniReachability OBJECT-TYPE
    SYNTAX      INTEGER { ok(1), fail(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used in conjunction with
        ciscoWANPnniRemoteNodeId to indicate the
        reachability of the RemoteNode has changed:
            1 - RemoteNode became reachable, or
            2 - RemoteNode became unreachable."
    ::= { ciscoWANPnniRouting 3 }

ciscoWANPnniRemoteNodeId OBJECT-TYPE
    SYNTAX     PnniNodeId
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Indicates the node identifier of a remote node.
        If the remote node ID is unknown, this attribute
        is set to all zeros."
    ::= { ciscoWANPnniRouting 4 }

ciscoWANPnniPortId OBJECT-TYPE
    SYNTAX     PnniPortId
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The port identifier of the port." 
    ::= { ciscoWANPnniRouting 5 }

-- the interface operation table
cwspOperationTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwspOperationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Interface operation table contains the runtime
        negotiated values between platform, PNNI controller
        and peer on an interface"
    ::= { cwspOperation 1 }
 
cwspOperationEntry OBJECT-TYPE
    SYNTAX      CwspOperationEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the interface operation table containing
         negotiated values of an interface"
    INDEX { ifIndex }
    ::= { cwspOperationTable 1 }
 
CwspOperationEntry ::= SEQUENCE {
    cwspOperIlmiEnable  TruthValue,
    cwspOperIfcType     INTEGER,
    cwspOperIfcSide     INTEGER,
    cwspOperMaxVPCs     Integer32,
    cwspOperMaxVCCs     Integer32,
    cwspOperMaxVpiBits  Integer32,
    cwspOperMaxVciBits  Integer32,
    cwspOperUniType     INTEGER,
    cwspOperUniVersion  INTEGER,
    cwspOperDeviceType  INTEGER,
    cwspOperIlmiVersion INTEGER,
    cwspOperNniSigVersion INTEGER,
    cwspOperMaxSvpcVpi  Integer32,
    cwspOperMinSvpcVpi  Integer32,
    cwspOperMaxSvccVpi  Integer32,
    cwspOperMinSvccVpi  Integer32,
    cwspOperMaxSvccVci  Integer32,
    cwspOperMinSvccVci  Integer32,
    cwspOperAddrPlanSupported INTEGER
}
 
cwspOperIlmiEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The operational state of ILMI."
    ::= { cwspOperationEntry 1 }
cwspOperIfcType OBJECT-TYPE
    SYNTAX      INTEGER { 
                    publicUni(1),
                    privateUni(2),
                    iisp(3),
                    pnni(4),
                    aini(5),
                    enni(6)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The interface type of an interface
            publicUni -- Public User-Network Interface
            privateUni -- Private User-Network Interface
            iisp -- Interim Inter-Switch Signaling Protocol
            pnni -- Private Network-Network Interface
            aini -- ATM Inter-Network Interface
            enni -- Enhanced Network-Network Interface, a cisco
                    proprietary interfac type."
    ::= { cwspOperationEntry 2 }
 
cwspOperIfcSide OBJECT-TYPE
    SYNTAX      INTEGER { 
                    userSide(1),
                    networkSide(2),
                    symmetric(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IME type of the ATM device which is concluded from 
        automatic interface type determination procedure."
    REFERENCE
        "ATM Forum ILMI 4.0 Section 8.3.4.1"
    ::= { cwspOperationEntry 3 }
 
cwspOperMaxVPCs OBJECT-TYPE
    SYNTAX      Integer32(0..4096)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of switched and permanent VPCs supported
        on this ATM interface"
    ::= { cwspOperationEntry 4 }
 
cwspOperMaxVCCs OBJECT-TYPE
    SYNTAX      Integer32(0..65536)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of switched and permanent VCCs supported
        on this ATM interface"
    ::= { cwspOperationEntry 5 }
 
cwspOperMaxVpiBits OBJECT-TYPE
    SYNTAX      Integer32(0..12)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of active VPI bits on this ATM interface."
    ::= { cwspOperationEntry 6 }
 
cwspOperMaxVciBits OBJECT-TYPE
    SYNTAX      Integer32(0..16)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of active VCI bits on this ATM interface."
    ::= { cwspOperationEntry 7 }
 
cwspOperUniType OBJECT-TYPE
    SYNTAX      INTEGER {
                    public(1),
                    private(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The type of the ATM device, either public or private."
    ::= { cwspOperationEntry 8 }
 
cwspOperUniVersion OBJECT-TYPE
    SYNTAX      INTEGER { 
                    version2point0(1),
                    version3poing0(2),
                    version3poing1(3),
                    version4poing0(4),
                    unsupported(5)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An indication of the latest version of the ATM Forum UNI
        Signaling Specification that is supported on this ATM
        Interface.  If this value is not present, a version of the
        UNI earlier than 3.1 is supported.
 
        If the peer IME's value of this object is the same as,
        or later than the local IME's value, then the version
        corresponding to the local IME's value should be
        attempted.  Otherwise, if the peer IME's value of this
        object is earlier, and supported locally, then the
        local IME should attempt the version corresponding to
        the peer IME's value.  Otherwise, compatibility of the
        two IMEs cannot be assumed."
    ::= { cwspOperationEntry 9 }
 
cwspOperDeviceType OBJECT-TYPE
    SYNTAX      INTEGER { 
                    user(1),
                    node(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object determines the type of the ATM device. This
        object is used in automatic ATM Interface-Type determination
        procedure such that a correct operational ATM
        Interface-type can be determined. An ATM End System
        shall take the value of user(1), and an ATM network
        node shall take the value of node(2)."
    ::= { cwspOperationEntry 10 }
 
cwspOperIlmiVersion OBJECT-TYPE
    SYNTAX      INTEGER {
                    unsupported(1),
                    version4point0(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An indication of the latest version of the ATM Forum
        ILMI Specification that is supported on this ATM Interface.
 
        If the peer IME's value of this object is the same as,
        or later than the local IME's value, then the version
        corresponding to the local IME's value should be
        attempted.  Otherwise, if the peer IME's value of this
        object is earlier, and supported locally, then the
        local IME should attempt the version corresponding to
        the peer IME's value.  Otherwise, compatibility of the
        two IMEs cannot be assumed.
 
        If this object is not present, a version of the ILMI earlier
        than 4.0 is supported."
    ::= { cwspOperationEntry 11 }
 
cwspOperNniSigVersion OBJECT-TYPE
    SYNTAX      INTEGER {
                    unsupported(1),
                    iisp(2),
                    pnniVersion1point0(3),
                    enni(4),
                    aini(5) 
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An indication of the latest version of the ATM Forum
        PNNI Signaling Specification that is supported on this
        ATM Interface. Note that the PNNI routing version is not
        determined through ILMI.
 
        If the peer IME's value of this object is the same as,
        or later than the local IME's value, then the version
        corresponding to the local IME's value should be
        attempted.  Otherwise, if the peer IME's value of this
        object is earlier, and supported locally, then the
        local IME should attempt the version corresponding to
        the peer IME's value.  Otherwise, compatibility of the
        two IMEs cannot be assumed.

        Note that 'enni' is not a signaling protocol." 
    ::= { cwspOperationEntry 12 }
 
cwspOperMaxSvpcVpi OBJECT-TYPE
    SYNTAX      Integer32(1..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum switched VPC VPI."
    ::= { cwspOperationEntry 13 }
 
cwspOperMinSvpcVpi OBJECT-TYPE
    SYNTAX      Integer32(1..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum switched VPC VPI."
    ::= { cwspOperationEntry 14 }
 
cwspOperMaxSvccVpi OBJECT-TYPE
    SYNTAX      Integer32(0..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum switched VCC VPI."
    ::= { cwspOperationEntry 15 }
 
cwspOperMinSvccVpi OBJECT-TYPE
    SYNTAX      Integer32(0..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum switched VCC VPI."
    ::= { cwspOperationEntry 16 }
 
cwspOperMaxSvccVci OBJECT-TYPE
    SYNTAX      Integer32(35..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum switched VCC VCI."
    ::= { cwspOperationEntry 17 }
 
cwspOperMinSvccVci OBJECT-TYPE
    SYNTAX      Integer32(0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum switched VCC VCI."
    ::= { cwspOperationEntry 18 }
 
cwspOperAddrPlanSupported OBJECT-TYPE
    SYNTAX      INTEGER {
                    both(1),
                    aesa(2),
                    e164(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ATM address plan supported on a public UNI. For all other
        interfaces, the value is aesa."
    ::= { cwspOperationEntry 19 }

-- cwspOperFailReason is used in Notifications

cwspOperFailReason  OBJECT-TYPE
    SYNTAX    INTEGER { 
                  ilmiDown(1),
                  portDown(2),
                  vsiOperDown(3),
                  vccfailure(4),
                  neighIpChanged(5),
                  vsiRemove(6),
                  vsiAdminDown(7) 
              }
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
        "Defined SVC port failures.  
        Note: this object is used as trap varbind only.
        The NMS applications should not issue SNMP get,
        get-next for this object."
    ::= { cwspOperation 2 }
 

ciscoWANSpvcFailReason       OBJECT-TYPE
    SYNTAX      CwspSpvcState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Defines SPVC manager failures. Refer description
        in the textual convention.
        Note:  this object is for Supporting Varbinds used only
        in trap definitions. The NMS applications should not
        depend on the implementation of this object. The
        SNMP Requests(GET,GET-NEXT) is not valid for
        this object."
    ::= { ciscoWANSpvc 1 }

--  scalar object for spvc.
 
cwspSpvcNodePrefix     OBJECT-TYPE
    SYNTAX     OCTET STRING(SIZE(13)) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Spvc node prefix for the pnni controller. This
        node prefix identifies an SPVC node in the network."
    ::= { ciscoWANSpvc 2 }
-- Conformance

ciscoWANSvcMIBConformance  OBJECT IDENTIFIER 
                               ::= { ciscoWANSvcMIB 3 }
ciscoWANSvcMIBCompliances  OBJECT IDENTIFIER 
                               ::= { ciscoWANSvcMIBConformance 1 }
ciscoWANSvcMIBGroups       OBJECT IDENTIFIER 
                               ::= { ciscoWANSvcMIBConformance 2 }

-- Compliance

ciscoWANSvcMIBCompliance  MODULE-COMPLIANCE
    STATUS  deprecated -- replaced by ciscoWANSvcMIBCompliance2
    DESCRIPTION 
        "The compliance statement for entities that support
        the Cisco SVC MIB.
        "
    MODULE  -- compliance to this module
        MANDATORY-GROUPS  {
            cwsInfoGrp,
            cwspConfigGrp,
            cwspCacConfigGrp,
            cwspCallStatsGrp,
            cwspSigStatsGrp,
            cwspCallGrp,
            cwspAbrCallGrp,
            cwspPrefixGrp,
            cwspLoadGrp,
            cwspAddressGrp,
            cwspConnTraceGrp,
            cwspOperationGrp
        }
 
        GROUP   cwspSigConfigGrp
        DESCRIPTION
            "The signaling config group is optional."
 
        GROUP   cwspSscopConfigGrp
        DESCRIPTION
            "The sscop config group is optional."
 
        GROUP   cwspSscopStatsGrp
        DESCRIPTION
            "The sscop stat group is optional."
 
        GROUP   cwspRegAddressGrp
        DESCRIPTION
            "The registered atm address group is optional."
 
        GROUP   cwspRoutingGrp
        DESCRIPTION
            "The PNNI routing group is optional."
        
        GROUP   cwspSpvcGrp
        DESCRIPTION
            "The Spvc group is optional."

        OBJECT cwspSpvcNodePrefix
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write Access is not permitted now until future
            release."

        OBJECT cwspMaxP2pCalls
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write Access is not permitted now until future
            release."
    ::= { ciscoWANSvcMIBCompliances 1 }

ciscoWANSvcMIBCompliance2  MODULE-COMPLIANCE
    STATUS  deprecated -- replaced by ciscoWANSvcMIBCompliance3 
    DESCRIPTION
        "The compliance statement for entities that support
        the Cisco SVC MIB.
        "
    MODULE  -- compliance to this module
        MANDATORY-GROUPS  {
            cwsInfoGrp,
            cwspConfigGrp,
            cwspCacConfigGrp,
            cwspCallStatsGrp,
            cwspSigStatsGrp,
            cwspCallGrp,
            cwspAbrCallGrp,
            cwspPrefixGrp,
            cwspLoadGrp,
            cwspAddressGrp,
            cwspConnTraceGrp2,
            cwspOperationGrp
        }

        GROUP   cwspSigConfigGrp
        DESCRIPTION
            "The signaling config group is optional."

        GROUP   cwspSscopConfigGrp
        DESCRIPTION
            "The sscop config group is optional."

        GROUP   cwspSscopStatsGrp
        DESCRIPTION
            "The sscop stat group is optional."

        GROUP   cwspRegAddressGrp
        DESCRIPTION
            "The registered atm address group is optional."

        GROUP   cwspRoutingGrp
        DESCRIPTION
            "The PNNI routing group is optional."

        GROUP   cwspSpvcGrp
        DESCRIPTION
            "The Spvc group is optional."

        OBJECT cwspSpvcNodePrefix
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write Access is not permitted now until future
            release."

        OBJECT cwspMaxP2pCalls
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write Access is not permitted now until future
            release."
    ::= { ciscoWANSvcMIBCompliances 2 }


ciscoWANSvcMIBCompliance3  MODULE-COMPLIANCE
    STATUS  current 
    DESCRIPTION
        "The compliance statement for entities that support
        the Cisco SVC MIB.
        "
    MODULE  -- compliance to this module
    MANDATORY-GROUPS  {
        cwsInfoGrp,
        cwspConfigGrp3,
        cwspCacConfigGrp,
        cwspCallStatsGrp,
        cwspSigStatsGrp,
        cwspCallGrp,
        cwspAbrCallGrp,
        cwspPrefixGrp,
        cwspLoadGrp,
        cwspAddressGrp,
        cwspConnTraceGrp2,
        cwspOperationGrp
    }

    GROUP   cwspSigConfigGrp
    DESCRIPTION
        "The signaling config group is optional."

    GROUP   cwspSscopConfigGrp
    DESCRIPTION
        "The sscop config group is optional."

    GROUP   cwspSscopStatsGrp
    DESCRIPTION
        "The sscop stat group is optional."

    GROUP   cwspRegAddressGrp
    DESCRIPTION
        "The registered atm address group is optional."

    GROUP   cwspRoutingGrp
    DESCRIPTION
        "The PNNI routing group is optional."

    GROUP   cwspSpvcGrp
    DESCRIPTION
        "The Spvc group is optional."

    OBJECT cwspSpvcNodePrefix
    MIN-ACCESS  read-only
    DESCRIPTION
        "Write Access is not permitted now until future release"

    OBJECT cwspMaxP2pCalls
    MIN-ACCESS  read-only
    DESCRIPTION
        "Write Access is not permitted now until future release"

    ::= { ciscoWANSvcMIBCompliances 3 }


-- Units of Conformance
cwsInfoGrp  OBJECT-GROUP
    OBJECTS  {
        cwsSwRevision,
        cwsControllerStatus,
        cwspPnniStndbyControllerStatus,
        cwspPnniControllerStatus,
        cwspPnniControllerPhySlot
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing device level information."
    ::= { ciscoWANSvcMIBGroups 1 }

cwspConfigGrp  OBJECT-GROUP 
    OBJECTS  {
        cwspAdminStatus,
        cwspOperStatus,
        cwspSvcBlocked,
        cwspSpvcBlocked,
        cwspIlmiAddrRegEnable,
        cwspIlmiAutoConfEnable,
        cwspIlmiServRegEnable,
        cwspPhyIdentifier,
        cwspSignallingVpi,
        cwspSignallingVci,
        cwspRoutingVpi,
        cwspRoutingVci,
        cwspMaxVpiBits,
        cwspMaxVciBits,
        cwspUniVersion,
        cwspNniVersion,
        cwspUniType,
        cwspSide,
        cwspMaxP2pCalls,
        cwspMaxP2mpRoots,
        cwspMaxP2mpLeafs,
        cwspMinSvccVpi,
        cwspMaxSvccVpi,
        cwspMinSvccVci,
        cwspMaxSvccVci,
        cwspMinSvpcVpi,
        cwspMaxSvpcVpi,
        cwspEnhancedIisp,
        cwspConfigTableRowStatus,
        cwspAddrPlanSupported
    }
    STATUS deprecated -- replace by cwspConfigGrp2 
    DESCRIPTION
        "A collection of objects providing information about
        the controller interface operation and associated 
        parameters."
    ::= { ciscoWANSvcMIBGroups 2 }
 
cwspCacConfigGrp  OBJECT-GROUP
    OBJECTS  {
        cwspUtilFactorCbr,
        cwspUtilFactorRtVbr,
        cwspUtilFactorNrtVbr,
        cwspUtilFactorAbr,
        cwspUtilFactorUbr,
        cwspMaxBwCbr,
        cwspMaxBwRtVbr,
        cwspMaxBwNrtVbr,
        cwspMaxBwAbr,
        cwspMaxBwUbr,
        cwspMinBwCbr,
        cwspMinBwRtVbr,
        cwspMinBwNrtVbr,
        cwspMinBwAbr,
        cwspMinBwUbr,
        cwspMaxVcCbr,
        cwspMaxVcRtVbr,
        cwspMaxVcNrtVbr,
        cwspMaxVcAbr,
        cwspMaxVcUbr,
        cwspMinVcCbr,
        cwspMinVcRtVbr,
        cwspMinVcNrtVbr,
        cwspMinVcAbr,
        cwspMinVcUbr,
        cwspMaxVcBwCbr,
        cwspMaxVcBwRtVbr,
        cwspMaxVcBwNrtVbr,
        cwspMaxVcBwAbr,
        cwspMaxVcBwUbr,
        cwspDefaultCdvtCbr,
        cwspDefaultCdvtRtVbr,
        cwspDefaultCdvtNrtVbr,
        cwspDefaultCdvtAbr,
        cwspDefaultCdvtUbr,
        cwspDefaultMbsRtVbr,
        cwspDefaultMbsNrtVbr
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
                 CAC information of a interface."
    ::= { ciscoWANSvcMIBGroups 3 }
 
cwspCallStatsGrp  OBJECT-GROUP
    OBJECTS  {
        cwspCountReset,
        cwspInCallAttempts,
        cwspInCallEstabs,
        cwspInCallFailures,
        cwspInFilterFailures,
        cwspInRouteFailures,
        cwspInResrcFailures,
        cwspInTimerFailures,
        cwspInCrankbacks,
        cwspOutCallAttempts,
        cwspOutCallEstabs,
        cwspOutCallFailures,
        cwspOutFilterFailures,
        cwspOutRouteFailures,
        cwspOutResrcFailures,
        cwspOutTimerFailures,
        cwspOutCrankbacks
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        call statistics of a interface."
    ::= { ciscoWANSvcMIBGroups 4 }
 
cwspSigStatsGrp  OBJECT-GROUP
    OBJECTS  {
        cwspSigCounterReset,
        cwspCallProcRcv,
        cwspConnectRcv,
        cwspConnectAckRcv,
        cwspSetupRcv,
        cwspReleaseRcv,
        cwspReleaseComplRcv,
        cwspRestartRcv,
        cwspRestartAckRcv,
        cwspStatusRcv,
        cwspStatusEnqRcv,
        cwspNotifyRcv,
        cwspAlertRcv,
        cwspProgressRcv,
        cwspAddPtyRcv,
        cwspAddPtyAckRcv,
        cwspAddPtyRejRcv,
        cwspDropPtyRcv,
        cwspIncorrectMsgRcv,
        cwspTimerExpiries,
        cwspLastCause,
        cwspLastDiagnostic,
        cwspCallProcXmt,
        cwspConnectXmt,
        cwspConnectAckXmt,
        cwspSetupXmt,
        cwspReleaseXmt,
        cwspReleaseComplXmt,
        cwspRestartXmt,
        cwspRestartAckXmt,
        cwspStatusXmt,
        cwspStatusEnqXmt,
        cwspNotifyXmt,
        cwspAlertXmt,
        cwspProgressXmt,
        cwspAddPtyXmt,
        cwspAddPtyAckXmt,
        cwspAddPtyRejXmt,
        cwspDropPtyXmt,
        cwspSscopStatus
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        signaling statistics."
    ::= { ciscoWANSvcMIBGroups 5 }
 
cwspCallGrp  OBJECT-GROUP
    OBJECTS  {
        cwspCallCallRef,
        cwspCallCallingAddress,
        cwspCallCalledAddress,
        cwspCallCallingSubAddr,
        cwspCallCalledSubAddr,
        cwspCallOtherIntfIndex,
        cwspCallOtherIntfVpi,
        cwspCallOtherIntfVci,
        cwspCallOtherIntfCallRef,
        cwspCallType,
        cwspCallStartTime,
        cwspCallBearerClass,
        cwspCallServiceCategory,
        cwspCallCastType,
        cwspCallClipSusceptibility,
        cwspCallFwdConformance,
        cwspCallFwdPcr,
        cwspCallFwdScr,
        cwspCallFwdMbs,
        cwspCallFwdCdvt,
        cwspCallFwdFrameDiscard,
        cwspCallBwdConformance,
        cwspCallBwdPcr,
        cwspCallBwdScr,
        cwspCallBwdMbs,
        cwspCallBwdCdvt,
        cwspCallBwdFrameDiscard,
        cwspCallMaxCtd,
        cwspCallMaxFwdCdv,
        cwspCallMaxFwdClr,
        cwspCallMaxBwdCdv,
        cwspCallMaxBwdClr
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        the p2p or p2mp SVC/SPVC calls and associated parameters."
    ::= { ciscoWANSvcMIBGroups 6 }
 
cwspAbrCallGrp  OBJECT-GROUP
    OBJECTS  {
        cwspAbrCallCallRef,
        cwspAbrCallClgAddress,
        cwspAbrCallCldAddress,
        cwspAbrCallClgSubAddr,
        cwspAbrCallCldSubAddr,
        cwspAbrCallOtherIntfIndex,
        cwspAbrCallOtherIntfVpi,
        cwspAbrCallOtherIntfVci,
        cwspAbrCallOtherIntfCallRef,
        cwspAbrCallType,
        cwspAbrCallStartTime,
        cwspAbrCallBearerClass,
        cwspAbrCallServiceCategory,
        cwspAbrCallCastType,
        cwspAbrCallClipSusceptibility,
        cwspAbrCallFwdConformance,
        cwspAbrCallFwdPcr,
        cwspAbrCallFwdMcr,
        cwspAbrCallFwdIcr,
        cwspAbrCallFwdRif,
        cwspAbrCallFwdRdf,
        cwspAbrCallFwdTbe,
        cwspAbrCallFwdNrm,
        cwspAbrCallFwdTrm,
        cwspAbrCallFwdAdtf,
        cwspAbrCallFwdCdf,
        cwspAbrCallFwdFrameDiscard,
        cwspAbrCallBwdPcr,
        cwspAbrCallBwdMcr,
        cwspAbrCallBwdIcr,
        cwspAbrCallBwdRif,
        cwspAbrCallBwdRdf,
        cwspAbrCallBwdTbe,
        cwspAbrCallBwdNrm,
        cwspAbrCallBwdTrm,
        cwspAbrCallBwdAdtf,
        cwspAbrCallBwdCdf,
        cwspAbrCallBwdFrameDiscard,
        cwspAbrCallFrtt,
        cwspAbrCallMaxCtd,
        cwspAbrCallMaxFwdCdv,
        cwspAbrCallMaxFwdClr,
        cwspAbrCallMaxBwdCdv,
        cwspAbrCallMaxBwdClr
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        ABR calls and associated parameters of a interface."
    ::= { ciscoWANSvcMIBGroups 7 }
 
cwspPrefixGrp  OBJECT-GROUP
    OBJECTS  {
        cwspPrefixRowStatus
    }
    STATUS  current
    DESCRIPTION
       "A table specifying the network prefix(es)
       used for ILMI address registration."
    ::= { ciscoWANSvcMIBGroups 8 }
 
cwspLoadGrp  OBJECT-GROUP
    OBJECTS  {
        cwspLoadBwTotal,
        cwspLoadMaxBwCbr,
        cwspLoadMaxBwRtVbr,
        cwspLoadMaxBwNrtVbr,
        cwspLoadMaxBwAbr,
        cwspLoadMaxBwUbr,
        cwspLoadBwAvail,
        cwspLoadAvlBwCbr,
        cwspLoadAvlBwRtVbr,
        cwspLoadAvlBwNrtVbr,
        cwspLoadAvlBwAbr,
        cwspLoadAvlBwUbr,
        cwspLoadVcAvail,
        cwspLoadAvlVcCbr,
        cwspLoadAvlVcRtVbr,
        cwspLoadAvlVcNrtVbr,
        cwspLoadAvlVcAbr,
        cwspLoadAvlVcUbr,
        cwspLoadCtdCbr,
        cwspLoadCtdRtVbr,
        cwspLoadCtdNrtVbr,
        cwspLoadCtdAbr,
        cwspLoadCtdUbr,
        cwspLoadCdvCbr,
        cwspLoadCdvRtVbr,
        cwspLoadCdvNrtVbr,
        cwspLoadCdvAbr,
        cwspLoadCdvUbr,
        cwspLoadClr0Cbr,
        cwspLoadClr0RtVbr,
        cwspLoadClr0NrtVbr,
        cwspLoadClr0Abr,
        cwspLoadClr0Ubr,
        cwspLoadClr01Cbr,
        cwspLoadClr01RtVbr,
        cwspLoadClr01NrtVbr,
        cwspLoadClr01Abr,
        cwspLoadClr01Ubr,
        cwspLoadMinGurCrCbr,
        cwspLoadMinGurCrRtVbr,
        cwspLoadMinGurCrNrtVbr,
        cwspLoadMinGurCrAbr,
        cwspLoadMinGurCrUbr
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        load information and associated parameters of a interface."
    ::= { ciscoWANSvcMIBGroups 9 }
 
cwspAddressGrp  OBJECT-GROUP
    OBJECTS  {
        cwspAddrType,
        cwspAddrProto,
        cwspAddrPlan,
        cwspAddrScope,
        cwspAddrRedistribute,
        cwspAddressRowStatus
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        ATM End System Addresses."
    ::= { ciscoWANSvcMIBGroups 10 }
 
cwspSigConfigGrp  OBJECT-GROUP
    OBJECTS  {
        cwspSigCfgT301,
        cwspSigCfgT303,
        cwspSigCfgT308,
        cwspSigCfgT310,
        cwspSigCfgT316,
        cwspSigCfgT317,
        cwspSigCfgT322,
        cwspSigCfgT397,
        cwspSigCfgT398,
        cwspSigCfgT399
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        signaling configuration and associated parameters."
    ::= { ciscoWANSvcMIBGroups 11 }
 
cwspSscopConfigGrp  OBJECT-GROUP
    OBJECTS  {
        cwspSscopTmrCC,
        cwspSscopTmrKeepAlive,
        cwspSscopTmrNoResp,
        cwspSscopTmrPoll,
        cwspSscopTmtIdle,
        cwspSscopMaxCC,
        cwspSscopMaxPD,
        cwspSscopMaxSTAT
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        SSCOP configuration and associated parameters."
    ::= { ciscoWANSvcMIBGroups 12 }
 
cwspSscopStatsGrp  OBJECT-GROUP
    OBJECTS  {
        cwspSscopCounterReset,
        cwspSscopIgnoredPduRcv,
        cwspSscopBgnRcv,
        cwspSscopBgakRcv,
        cwspSscopEndRcv,
        cwspSscopEndakRcv,
        cwspSscopRsRcv,
        cwspSscopRsakRcv,
        cwspSscopBgrejRcv,
        cwspSscopSdRcv,
        cwspSscopSdpRcv,
        cwspSscopPollRcv,
        cwspSscopStatRcv,
        cwspSscopUstatRcv,
        cwspSscopUdRcv,
        cwspSscopMdRcv,
        cwspSscopErakRcv,
        cwspSscopBgnXmt,
        cwspSscopBgakXmt,
        cwspSscopEndXmt,        
        cwspSscopEndakXmt,
        cwspSscopRsXmt,
        cwspSscopRsakXmt,
        cwspSscopBgrejXmt,
        cwspSscopSdXmt,
        cwspSscopSdpXmt,
        cwspSscopPollXmt,
        cwspSscopStatXmt,
        cwspSscopUstatXmt,
        cwspSscopUdXmt,
        cwspSscopMdXmt,
        cwspSscopErakXmt
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        SSCOP statistics."
    ::= { ciscoWANSvcMIBGroups 13 }
 
cwspRegAddressGrp  OBJECT-GROUP
    OBJECTS  {
        cwspRegAtmAddress,
        cwspRegAddressOrgSscope
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        registed ATM address."
    ::= { ciscoWANSvcMIBGroups 14 }
 
cwspRoutingGrp  OBJECT-GROUP
    OBJECTS  {
        ciscoWANPnniLinkStatus,
        ciscoWANPnniPglStatus,
        ciscoWANPnniReachability,
        ciscoWANPnniRemoteNodeId,
        ciscoWANPnniPortId
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        PNNI topology."
    ::= { ciscoWANSvcMIBGroups 15 }

cwspConnTraceGrp  OBJECT-GROUP
    OBJECTS  {
        cwspConnTraceAvail,
        cwspConnTraceNextIndex,
        cwspConnTraceifIndex,
        cwspConnTraceSrcVpi,
        cwspConnTraceSrcVci,
        cwspConnTraceType,
        cwspConnTraceCallRef,
        cwspConnTraceLeafRef,
        cwspConnTraceDestVpi,
        cwspConnTraceDestVci,
        cwspConnTraceDestCallRef,
        cwspConnTraceResultStatus,
        cwspConnTraceQueryStatus,
        cwspConnTraceNodeId,
        cwspConnTraceEgressPortId,
        cwspConnTraceEgressVpi,
        cwspConnTraceEgressVci,
        cwspConnTraceEgressCallRef,
        cwspConnTraceEgressPhyPortId
    }
    STATUS deprecated -- replaced by cwspConnTraceGrp2 
    DESCRIPTION
        "A collection of objects providing trace information about
        SVC/PNNI connnection."
    ::= { ciscoWANSvcMIBGroups 16 }

cwspOperationGrp OBJECT-GROUP
    OBJECTS  {
        cwspOperIlmiEnable,
        cwspOperIfcType,
        cwspOperIfcSide,
        cwspOperMaxVPCs,
        cwspOperMaxVCCs,
        cwspOperMaxVpiBits,
        cwspOperMaxVciBits,
        cwspOperUniType,
        cwspOperUniVersion,
        cwspOperDeviceType,
        cwspOperIlmiVersion,
        cwspOperNniSigVersion,
        cwspOperMaxSvpcVpi,
        cwspOperMinSvpcVpi,
        cwspOperMaxSvccVpi,
        cwspOperMinSvccVpi,
        cwspOperMaxSvccVci,
        cwspOperMinSvccVci,
        cwspOperFailReason,
        cwspOperAddrPlanSupported,
        cwspIlmiSecureLink,
        cwspIlmiAttachmentPoint,
        cwspIlmiLocalAttrStd,
        cwspIlmiUCSMEnable
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
         runtime negotiated values between platform, PNNI
         controller and peer on an interface."
    ::= { ciscoWANSvcMIBGroups 17 }

cwspSpvcGrp  OBJECT-GROUP
    OBJECTS  {
        ciscoWANSpvcFailReason,
        cwspSpvcNodePrefix
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing spvc related 
        information in pnni controller."
    ::= { ciscoWANSvcMIBGroups 18 }

cwspConnTraceGrp2  OBJECT-GROUP
    OBJECTS  {
        cwspConnTraceAvail,
        cwspConnTraceNextIndex,
        cwspConnTraceifIndex,
        cwspConnTraceSrcVpi,
        cwspConnTraceSrcVci,
        cwspConnTraceType,
        cwspConnTraceCallRef,
        cwspConnTraceLeafRef,
        cwspConnTraceDestVpi,
        cwspConnTraceDestVci,
        cwspConnTraceDestCallRef,
        cwspConnTraceResultStatus,
        cwspConnTraceQueryStatus,
        cwspConnTraceNodeId,
        cwspConnTraceEgressPortId,
        cwspConnTraceEgressVpi,
        cwspConnTraceEgressVci,
        cwspConnTraceEgressCallRef,
        cwspConnTraceEgressPhyPortId,
        cwspConnTraceLastNode
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing trace information about
        SVC/PNNI connnection."
    ::= { ciscoWANSvcMIBGroups 19 }

cwspConfigGrp2  OBJECT-GROUP
    OBJECTS  {
        cwspAdminStatus,
        cwspOperStatus,
        cwspSvcBlocked,
        cwspSpvcBlocked,
        cwspIlmiAddrRegEnable,
        cwspIlmiAutoConfEnable,
        cwspIlmiServRegEnable,
        cwspPhyIdentifier,
        cwspSignallingVpi,
        cwspSignallingVci,
        cwspRoutingVpi,
        cwspRoutingVci,
        cwspMaxVpiBits,
        cwspMaxVciBits,
        cwspUniVersion,
        cwspNniVersion,
        cwspUniType,
        cwspSide,
        cwspMaxP2pCalls,
        cwspMaxP2mpRoots,
        cwspMaxP2mpLeafs,
        cwspMinSvccVpi,
        cwspMaxSvccVpi,
        cwspMinSvccVci,
        cwspMaxSvccVci,
        cwspMinSvpcVpi,
        cwspMaxSvpcVpi,
        cwspEnhancedIisp,
        cwspConfigTableRowStatus,
        cwspAddrPlanSupported,
        cwspIlmiSecureLink,
        cwspIlmiAttachmentPoint,
        cwspIlmiLocalAttrStd,
        cwspIlmiUCSMEnable,
        cwspRoutingPriority
    }
    STATUS deprecated -- replaced by cwspConfigGrp3  
    DESCRIPTION
        "A collection of objects providing information about
        the controller interface operation and associated parameters."
    ::= { ciscoWANSvcMIBGroups 20 }

cwspConfigGrp3  OBJECT-GROUP
    OBJECTS  {
        cwspAdminStatus,
        cwspOperStatus,
        cwspSvcBlocked,
        cwspSpvcBlocked,
        cwspIlmiAddrRegEnable,
        cwspIlmiAutoConfEnable,
        cwspIlmiServRegEnable,
        cwspPhyIdentifier,
        cwspSignallingVpi,
        cwspSignallingVci,
        cwspRoutingVpi,
        cwspRoutingVci,
        cwspMaxVpiBits,
        cwspMaxVciBits,
        cwspUniVersion,
        cwspNniVersion,
        cwspUniType,
        cwspSide,
        cwspMaxP2pCalls,
        cwspMaxP2mpRoots,
        cwspMaxP2mpLeafs,
        cwspMinSvccVpi,
        cwspMaxSvccVpi,
        cwspMinSvccVci,
        cwspMaxSvccVci,
        cwspMinSvpcVpi,
        cwspMaxSvpcVpi,
        cwspEnhancedIisp,
        cwspConfigTableRowStatus,
        cwspAddrPlanSupported,
        cwspIlmiSecureLink,
        cwspIlmiAttachmentPoint,
        cwspIlmiLocalAttrStd,
        cwspIlmiUCSMEnable,
        cwspRoutingPriority,
        cwspSpvcAddress
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        the controller interface operation and associated parameters."
    ::= { ciscoWANSvcMIBGroups 21 }

END