Wellfleet-ATM-MIB device MIB details by Wellfleet
Wellfleet-ATM-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing Wellfleet-ATM-MIB.
| Vendor: | Wellfleet |
|---|---|
| Mib: | Wellfleet-ATM-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
Wellfleet-ATM-MIB DEFINITIONS ::= BEGIN -- Created by mdl2asn version 3.1 -- Creation date: Wed Aug 30 16:37:09 EDT 1995 IMPORTS Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfSonetGroup, wfAtmGroup, wfAtmInterfaceGroup FROM Wellfleet-COMMON-MIB; wfAtmCommonGroup OBJECT IDENTIFIER ::= { wfAtmInterfaceGroup 1 } wfAtmLinkModuleGroup OBJECT IDENTIFIER ::= { wfAtmInterfaceGroup 2 } wfAtmCellSwitchGroup OBJECT IDENTIFIER ::= { wfAtmInterfaceGroup 3 } wfAtm OBJECT IDENTIFIER ::= { wfAtmGroup 1 } wfAtmDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indication to create or delete an ATM Base record." DEFVAL { created } ::= { wfAtm 1 } wfAtmInterfaceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of ATM interfaces in the Wellfleet Router (entries in the wfAtmInterfaceTable), regardless of their current state, present on this system." ::= { wfAtm 2 } wfAtmOverallStatus OBJECT-TYPE SYNTAX INTEGER { healthy(1), interfaceanomaly(2), otheranomaly(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Overall status of ATM interfaces in the Wellfleet Router(entries in the wfAtmInterfaceTable) present on this system. Healthy indicates each configured interfaces are in the UP state. An interface anomaly is indicative of one or more of the configured interfaces being in the DOWN State. Other Anomaly is indicative of one or more ATM interfaces being in the INIT or NOT PRESENT state" DEFVAL { healthy } ::= { wfAtm 3 } wfAtmGlobalSigStkVersion OBJECT-TYPE SYNTAX INTEGER { u30(1), u31(2), sym(3), u40(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Global signalling stack Version. This value will be used to by management entities to know the global version of signalling. The intent here is to have passive placeholder. Active versions of signalling are maintained on a per ATM interface basis in wfAtmSscopEntry and wfAtmSigEntry. If this is considered of no value, please remove at your earliest convenience." DEFVAL { u30 } ::= { wfAtm 4 } wfAtmInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmInterfaceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ATM Interface Table - Router Resident The statistical and configuration parameters for an ATM Interface. There is one MIB instance of this record per Sync or HSSI line configured for ATM DXI support. The Physical ATM DXI interface is managed via this table." ::= { wfAtmGroup 2 } wfAtmInterfaceEntry OBJECT-TYPE SYNTAX WfAtmInterfaceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The attributes for a particular ATM DXI Interface" INDEX { wfAtmInterfaceLineNumber, wfAtmInterfaceLLIndex } ::= { wfAtmInterfaceTable 1 } WfAtmInterfaceEntry ::= SEQUENCE { wfAtmInterfaceDelete INTEGER, wfAtmInterfaceDisable INTEGER, wfAtmInterfaceState INTEGER, wfAtmInterfaceCircuit INTEGER, wfAtmInterfaceMaxSupportedVCs INTEGER, wfAtmInterfaceVCsInUse INTEGER, wfAtmInterfaceDescr DisplayString, wfAtmInterfaceType INTEGER, wfAtmInterfaceLastChange TimeTicks, wfAtmInterfacePlcp OBJECT IDENTIFIER, wfAtmMpeNull INTEGER, wfAtmCsNull INTEGER, wfAtmInterfaceMulticast INTEGER, wfAtmDrops Counter, wfAtmInterfaceLmiDisable INTEGER, wfAtmInterfaceLineNumber INTEGER, wfAtmInterfaceLLIndex INTEGER, wfAtmInterfaceDxiMode INTEGER, wfAtmUnknownVCPkts Counter } wfAtmInterfaceDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indication to create or delete an ATM DXI interface. This will remove ATMNET access over this interface The ATM Interface entry instance is removed from the MIB in this case." DEFVAL { created } ::= { wfAtmInterfaceEntry 1 } wfAtmInterfaceDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates when an ATM DXI interface is to be enabled or disabled. Disabling will disable ATM Access over this interface. The ATM Interface instance is NOT removed from the MIB in this case." DEFVAL { enabled } ::= { wfAtmInterfaceEntry 2 } wfAtmInterfaceState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state for this interface. The state indicates Not Present when the interface has been configured but has not been initialized. Init state indicates that the interface is in the process of being initialized by the system. Up state indicates that the interface is operating normally. Down state indicates that the ATM DXI interface is physically or logically disabled." DEFVAL { notpresent } ::= { wfAtmInterfaceEntry 3 } wfAtmInterfaceCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Wellfleet circuit number of this entry" ::= { wfAtmInterfaceEntry 4 } wfAtmInterfaceMaxSupportedVCs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of VCs allowed on this interface. Initially set by configuration system for PVCs only" DEFVAL { 512 } ::= { wfAtmInterfaceEntry 5 } wfAtmInterfaceVCsInUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of VCs that are currently configured on this interface" ::= { wfAtmInterfaceEntry 6 } wfAtmInterfaceDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "A textual string describing this ATM interface." ::= { wfAtmInterfaceEntry 7 } wfAtmInterfaceType OBJECT-TYPE SYNTAX INTEGER { other(1), ds1(2), ds3(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The transmission type used at the ATM interface." DEFVAL { other } ::= { wfAtmInterfaceEntry 8 } wfAtmInterfaceLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { wfAtmInterfaceEntry 9 } wfAtmInterfacePlcp OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the OID of the PLCP object in the MIB If no additional transmission and/or media specific information is available, this object has the value { 0 0 }. " ::= { wfAtmInterfaceEntry 10 } wfAtmMpeNull OBJECT-TYPE SYNTAX INTEGER { mpe1294(1), null(2), mpe1483(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to select Null, Multi-Protocol Encapsulation (RFC 1294) or Multi-Protocol Encapsulation (RFC 1483) layer for this Interface. Null is considered VC Based Multiplexing and is not supported for Bridging." DEFVAL { mpe1483 } ::= { wfAtmInterfaceEntry 11 } wfAtmCsNull OBJECT-TYPE SYNTAX INTEGER { aal34(1), null(2), aal5(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the type of CS_PDU encapsulation supported on the ATM DXI interface based on the ATM Forum's ATM DXI specification. This configuration is on a per Interface basis. The supported values are AAL3/4, AAL5 and Null (no CS_PDU encapsulation). Null is a propriatary configurable value when no CS_PDU encapsulation is desired." DEFVAL { aal5 } ::= { wfAtmInterfaceEntry 12 } wfAtmInterfaceMulticast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates whether the ATM service provider offers multicast service" DEFVAL { disabled } ::= { wfAtmInterfaceEntry 13 } wfAtmDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The cumulative count of packet drops on this ATM Interface." ::= { wfAtmInterfaceEntry 14 } wfAtmInterfaceLmiDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates when an LMI entry is to be enabled or disabled. Disabling will temporarily disable the ability to report CSU/DSU traps and the ability to retrieve statistical information from the CSU/DSU. The ATM LMI instance is NOT removed from the MIB in this case." DEFVAL { disabled } ::= { wfAtmInterfaceEntry 15 } wfAtmInterfaceLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmInterfaceEntry 16 } wfAtmInterfaceLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmInterfaceEntry 17 } wfAtmInterfaceDxiMode OBJECT-TYPE SYNTAX INTEGER { mode1a(1), mode1b(2), mode2(3), modep2(4) } ACCESS read-write STATUS mandatory DESCRIPTION "ATM DXI Mode. This attribute specifies the ATM DXI Mode for this interface based on the ATM Forum's ATM DXI specification. Currently supported is Modes 1a, 1b, 2 and Proprietary 2 (which is an earlier version of Mode 2)." DEFVAL { mode1a } ::= { wfAtmInterfaceEntry 18 } wfAtmUnknownVCPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of packets received with an unknown VC" ::= { wfAtmInterfaceEntry 19 } wfAtmLmiTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmLmiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ATM Local Management Interface Table - Router Resident The statistical and configuration parameters for an ATM DXI Local Management Interface. There is one LMI MIB instance per Sync or HSSI line configured for ATM DXI support. The LMI interface is managed via this table." ::= { wfAtmGroup 3 } wfAtmLmiEntry OBJECT-TYPE SYNTAX WfAtmLmiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The attributes for a particular ATM Lmi" INDEX { wfAtmLmiLineNumber, wfAtmLmiLLIndex } ::= { wfAtmLmiTable 1 } WfAtmLmiEntry ::= SEQUENCE { wfAtmLmiState INTEGER, wfAtmLmiCircuit INTEGER, wfAtmLmiNoVCErrors Counter, wfAtmLmiProxyRequests Counter, wfAtmLmiCsuDsuResponses Counter, wfAtmLmiCsuDsuTraps Counter, wfAtmLmiOtherErrors Counter, wfAtmLmiLineNumber INTEGER, wfAtmLmiLLIndex INTEGER } wfAtmLmiState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the LMI for this interface The state indicates Not Present when the LMI has been configured but has not been initialized. Init state indicates that the LMI is in the process of being initialized by the system. Up state indicates that the LMI is operating normally. Down state indicates that the LMI is physically or logically disabled." DEFVAL { notpresent } ::= { wfAtmLmiEntry 1 } wfAtmLmiCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The circuit number of this entry" ::= { wfAtmLmiEntry 2 } wfAtmLmiNoVCErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Frames dropped that couldn't be associated with the LMI VPI/VCI" ::= { wfAtmLmiEntry 3 } wfAtmLmiProxyRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SNMP Proxy Requests" ::= { wfAtmLmiEntry 4 } wfAtmLmiCsuDsuResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CSU/DSU SNMP Responses to Proxy Requests" ::= { wfAtmLmiEntry 5 } wfAtmLmiCsuDsuTraps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CSU/DSU SNMP Traps Received" ::= { wfAtmLmiEntry 6 } wfAtmLmiOtherErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames dropped to format or other errors." ::= { wfAtmLmiEntry 7 } wfAtmLmiLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmLmiEntry 8 } wfAtmLmiLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmLmiEntry 9 } wfAtmPlcpTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmPlcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM PLCP Table - CSU/DSU Resident The PLCP object reflects information about either DS1 or DS3 PLCP framing status and performance. There is one instance of this object for every ATM DS1 or DS3 UNI. The PLCP object is separated from the other ATM objects for two reasons. First, there may be ATM UNIs which use physical media other than DS1 or DS3, and thus the PLCP object may not apply to them. Second, the PLCP object may also be applied towards management of SMDS Interfaces (SIPs). This PLCP object is essentially a superset of the PLCP object described in the Internet Draft MIB for SMDS (SIPs). It contains variables of interest to some ATM service providers and customers." ::= { wfAtmGroup 4 } wfAtmPlcpEntry OBJECT-TYPE SYNTAX WfAtmPlcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per linenumber/llindex PLCP objects" INDEX { wfAtmPlcpLineNumber, wfAtmPlcpLLIndex } ::= { wfAtmPlcpTable 1 } WfAtmPlcpEntry ::= SEQUENCE { wfAtmPlcpCct INTEGER, wfAtmPlcpPhysical OBJECT IDENTIFIER, wfAtmPlcpLof INTEGER, wfAtmPlcpLofCFA INTEGER, wfAtmPlcpYellow INTEGER, wfAtmPlcpYellowCFA INTEGER, wfAtmPlcpStatus INTEGER, wfAtmPlcpSeconds Counter, wfAtmPlcpBipErrors Counter, wfAtmPlcpBipESecs Counter, wfAtmPlcpBipSESecs Counter, wfAtmPlcpFebes Counter, wfAtmPlcpFebeESecs Counter, wfAtmPlcpFebeSESecs Counter, wfAtmPlcpFrameErrors Counter, wfAtmPlcpSevereFrameErrors Counter, wfAtmPlcpSEFS Counter, wfAtmPlcpUAS Counter, wfAtmPlcpLineNumber INTEGER, wfAtmPlcpLLIndex INTEGER } wfAtmPlcpCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the DS1 or DS3 PLCP port for which this entry contains information. This corresponds to the Wellfleet circuit number" ::= { wfAtmPlcpEntry 1 } wfAtmPlcpPhysical OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the OID of the first object in the standard DS1 or DS3 MIB" ::= { wfAtmPlcpEntry 2 } wfAtmPlcpLof OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "True if Loss of Frame has been detected" DEFVAL { false } ::= { wfAtmPlcpEntry 3 } wfAtmPlcpLofCFA OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "True if Loss of Frame has been detected over the CFA time period" DEFVAL { false } ::= { wfAtmPlcpEntry 4 } wfAtmPlcpYellow OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "True if PLCP Yellow (Remote Alarm Indication) has been detected" DEFVAL { false } ::= { wfAtmPlcpEntry 5 } wfAtmPlcpYellowCFA OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "True if PLCP Yellow (Remote Alarm Indication) has been detected over the CFA time period" DEFVAL { false } ::= { wfAtmPlcpEntry 6 } wfAtmPlcpStatus OBJECT-TYPE SYNTAX INTEGER { connected(1), up(2), down(3), other(4), outofframe(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The value of this variable indicates the PLCP status as indicated by the three-bit PLCP LSS code received from the remote end. Connected is LSS code #0, linkUp is LSS code #6, and linkDown is code #3. OtherCode means that one of the other five possible code values is being received. OutOfFrame means that the PLCP is in the out of frame state, and therefore there is no code being received." DEFVAL { down } ::= { wfAtmPlcpEntry 7 } wfAtmPlcpSeconds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of seconds elapsed since event counting began or since the counters were last cleared. The implementation may optionally allow this variable to be set. If set, the set value is ignored, and this variable and all other event counters for this object are reset to zero." ::= { wfAtmPlcpEntry 8 } wfAtmPlcpBipErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of PLCP Bit Interleaved Parity (BIP) errors detected." ::= { wfAtmPlcpEntry 9 } wfAtmPlcpBipESecs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "BIP Errored Seconds. The count of seconds during which one or more BIP errors were detected." ::= { wfAtmPlcpEntry 10 } wfAtmPlcpBipSESecs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "BIP Severely Errored Seconds. The count of seconds during which five (5) or more BIP errors were detected." ::= { wfAtmPlcpEntry 11 } wfAtmPlcpFebes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of PLCP Far End Block Errors (FEBE) detected." ::= { wfAtmPlcpEntry 12 } wfAtmPlcpFebeESecs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "FEBE Errored Seconds. The count of seconds during which one or more FEBE errors were detected." ::= { wfAtmPlcpEntry 13 } wfAtmPlcpFebeSESecs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "FEBE Severely Errored Seconds. The count of seconds during which five (5) or more FEBE errors were detected." ::= { wfAtmPlcpEntry 14 } wfAtmPlcpFrameErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of PLCP Frame bit errors detected." ::= { wfAtmPlcpEntry 15 } wfAtmPlcpSevereFrameErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of PLCP Severe Frame errors (aka Out Of Frame Events) detected." ::= { wfAtmPlcpEntry 16 } wfAtmPlcpSEFS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Severely Errored Framing Seconds. The count of seconds during which one or more PLCP Severe Frame errors were detected." ::= { wfAtmPlcpEntry 17 } wfAtmPlcpUAS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Unavailable Seconds. The count of seconds during which the PLCP service was declared to be unavailable." ::= { wfAtmPlcpEntry 18 } wfAtmPlcpLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmPlcpEntry 19 } wfAtmPlcpLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmPlcpEntry 20 } wfAtmUniTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmUniEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM UNI Table - CSU/DSU Resident The ATM User Network Interface (UNI) object reflects information about a particular ATM UNI. In particular it contains information, both configuration and performance, from the 'ATM' or Cell layer of the ATM protocol hierarchy. It optionally keeps some information on a per-VPI/VCI basis. It 'points to' its associated physical layer object, for example the DS1 or DS3 PLCP object. It also 'points to' the (one or more) higher layer object(s), namely the ATM Adaptation Layer (AAL) object(s) which further process the ATM Cells. It should be noted that in the ATM UNI MIB, the receive (transmit) direction refers to data received from (transmitted to) the ATM UNI interface. ** For DL200 and DL3200 there is only one ATM UNI per DL unit ** and only one AAL object (specifically VBR) per ATM UNI. " ::= { wfAtmGroup 5 } wfAtmUniEntry OBJECT-TYPE SYNTAX WfAtmUniEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per linenumber/llindex User Network Interface (UNI) objects - wfAtmUniLineNumber and wfAtmUniLLIndex corresponds to Wellfleet linenumber/llindex number" INDEX { wfAtmUniLineNumber, wfAtmUniLLIndex } ::= { wfAtmUniTable 1 } WfAtmUniEntry ::= SEQUENCE { wfAtmUniCct INTEGER, wfAtmUniPhysical OBJECT IDENTIFIER, wfAtmUniAal OBJECT IDENTIFIER, wfAtmUniSeconds Counter, wfAtmUniLineNumber INTEGER, wfAtmUniLLIndex INTEGER } wfAtmUniCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This corresponds to the Wellfleet circuit number" ::= { wfAtmUniEntry 1 } wfAtmUniPhysical OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the OID of the first object in the standard DS1 or DS3 MIB corresponding to this ATM UNI port" ::= { wfAtmUniEntry 2 } wfAtmUniAal OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the AAL MIB corresponding to this ATM UNI port. There is only one AAL currently for the DXI application." ::= { wfAtmUniEntry 3 } wfAtmUniSeconds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of seconds elapsed since event counting began or since the counters were last cleared.The implementation may optionally allow this variable to be set.If set, the set value is ignored, and this variable and all other event counters for this object are reset to zero." ::= { wfAtmUniEntry 4 } wfAtmUniLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmUniEntry 5 } wfAtmUniLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmUniEntry 6 } wfAtmUniAtmTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmUniAtmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM UNIATM Table CSU/DSU Resident This list contains ATM Layer parameters, one entry per ATM UNI port. The counts maintained in this table are totals for the UNI, across all VPI/VCIs." ::= { wfAtmGroup 6 } wfAtmUniAtmEntry OBJECT-TYPE SYNTAX WfAtmUniAtmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per linenumber/llindex UNI ATM Layer objects - wfAtmUniAtmLineNumber and wfAtmUniAtmLLIndex corresponds to Wellfleet linenumber/llindex number" INDEX { wfAtmUniAtmLineNumber, wfAtmUniAtmLLIndex } ::= { wfAtmUniAtmTable 1 } WfAtmUniAtmEntry ::= SEQUENCE { wfAtmUniAtmCct INTEGER, wfAtmUniAtmNoBuffers Counter, wfAtmUniAtmHECs Counter, wfAtmUniAtmCHECs Counter, wfAtmUniAtmNullCells Counter, wfAtmUniAtmMisdeliveredCells Counter, wfAtmUniAtmReceives Counter, wfAtmUniAtmTransmits Counter, wfAtmUniAtmLineNumber INTEGER, wfAtmUniAtmLLIndex INTEGER } wfAtmUniAtmCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ATM UNI port for which corresponds to the Wellfleet circuit number" ::= { wfAtmUniAtmEntry 1 } wfAtmUniAtmNoBuffers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received ATM cells discarded due to the lack of available cell buffers" ::= { wfAtmUniAtmEntry 2 } wfAtmUniAtmHECs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received ATM cells discarded due to an uncorrected HEC" ::= { wfAtmUniAtmEntry 3 } wfAtmUniAtmCHECs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received ATM cells for which a HEC error was detected and corrected" ::= { wfAtmUniAtmEntry 4 } wfAtmUniAtmNullCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received Null (unassigned , empty) cells" ::= { wfAtmUniAtmEntry 5 } wfAtmUniAtmMisdeliveredCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received cells with an invalid VPI/VCI and were discarded" ::= { wfAtmUniAtmEntry 6 } wfAtmUniAtmReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Valid (non-null) ATM Cells received at this layer and passed up" ::= { wfAtmUniAtmEntry 7 } wfAtmUniAtmTransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Valid (non-null) ATM Cells transmitted at this layer and passed down to the PLCP layer" ::= { wfAtmUniAtmEntry 8 } wfAtmUniAtmLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmUniAtmEntry 9 } wfAtmUniAtmLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmUniAtmEntry 10 } wfAtmVbrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmVbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM VBR Table - CSU/DSU Resident The ATM Variable Bit Rate (VBR) object is one of several types of ATM Adaptation Layer (AAL) objects. The ATM VBR object reflects information about a VBR service carried by an ATM UNI on behalf of a DTE interface (e.g. a DXI). In particular, it contains both configuration and performance information about the Segmentation and Reassembly (SAR) sublayer and the Convergence Sublayer (CS). Each instance of the VBR object has only one corresponding DTE interface, and only one corresponding ATM UNI, although it may correspond to several VPI/VCIs within a particular ATM UNI. The VBR object optionally keeps some information on a per-VPI/VCI basis. It should be noted that in the ATM VBR MIB, the receive (transmit) direction refers to data received from (transmitted to) the ATM UNI interface. ** For DL200 and DL3200 DSUs, there is only one ATM UNI per DSU ** and only one AAL object (specifically VBR) per ATM UNI. ** For these products, the DSU does not perform the ** integrity checks for the VBR CS layer, and thus will not ** provide all variables for the VBR CS table. The Router/Host ** is expected to perform these checks and provide these variables. " ::= { wfAtmGroup 8 } wfAtmVbrEntry OBJECT-TYPE SYNTAX WfAtmVbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per linenumber/llindex VBR AAL objects - wfAtmVbrLineNumber and wfAtmVbrLLIndex corresponds to Wellfleet linenumber/llindex number" INDEX { wfAtmVbrLineNumber, wfAtmVbrLLIndex } ::= { wfAtmVbrTable 1 } WfAtmVbrEntry ::= SEQUENCE { wfAtmVbrCct INTEGER, wfAtmVbrAtmUni OBJECT IDENTIFIER, wfAtmVbrDxi OBJECT IDENTIFIER, wfAtmVbrSeconds Counter, wfAtmVbrLineNumber INTEGER, wfAtmVbrLLIndex INTEGER } wfAtmVbrCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the ATM VBR object which corresponds to the Wellfleet circuit number" ::= { wfAtmVbrEntry 1 } wfAtmVbrAtmUni OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the OID of the first object in the ATM UNI MIB corresponding to this ATM VBR-AAL" ::= { wfAtmVbrEntry 2 } wfAtmVbrDxi OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the DXI MIB corresponding to this ATM VBR-AAL. There is only one AAL currently for the DXI application." ::= { wfAtmVbrEntry 3 } wfAtmVbrSeconds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of seconds elapsed since event counting began or since the counters were last cleared. The implementation may optionally allow this variable to be set. If set, the set value is ignored, and this variable and all other event counters for this object are reset to zero." ::= { wfAtmVbrEntry 4 } wfAtmVbrLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmVbrEntry 5 } wfAtmVbrLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmVbrEntry 6 } wfAtmVbrSarTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmVbrSarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM VBR SAR Table CSU/DSU Resident This table contains ATM VBR-AAL, SAR Layer parameters, the entry per ATM VBR-AAL object. The counts maintained in this table are totals for the VBR, across all VPI/VCIs within the VBR." ::= { wfAtmGroup 9 } wfAtmVbrSarEntry OBJECT-TYPE SYNTAX WfAtmVbrSarEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per linenumber/llindex VBR AAL SAR sublayer objects - wfAtmSarLineNumber and wfAtmSarLLIndex corresponds to Wellfleet linenumber/llindex number" INDEX { wfAtmVbrSarLineNumber, wfAtmVbrSarLLIndex } ::= { wfAtmVbrSarTable 1 } WfAtmVbrSarEntry ::= SEQUENCE { wfAtmVbrSarCct INTEGER, wfAtmVbrSarAssemblyTimer INTEGER, wfAtmVbrSarCrc10Errors Counter, wfAtmVbrSarCellMidErrors Counter, wfAtmVbrSarCsPduSizeTooBigErrors Counter, wfAtmVbrSarNoBufferErrors Counter, wfAtmVbrSarComNoProcessErrors Counter, wfAtmVbrSarEomNoProcessErrors Counter, wfAtmVbrSarCellSequenceErrors Counter, wfAtmVbrSarCellLengthErrors Counter, wfAtmVbrSarBomBeforeEomErrors Counter, wfAtmVbrSarTimeouts Counter, wfAtmVbrSarLengthExceeds Counter, wfAtmVbrSarReceives Counter, wfAtmVbrSarTransmits Counter, wfAtmVbrSarLineNumber INTEGER, wfAtmVbrSarLLIndex INTEGER } wfAtmVbrSarCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "identifies the VBR_SAR object which corresponds to the Wellfleet circuit number" ::= { wfAtmVbrSarEntry 1 } wfAtmVbrSarAssemblyTimer OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum time period (milliseconds) allowed for CS_PDU assembly process to complete. This is the time between receipt of a BOM and receipt of an EOM SAR_PDU." ::= { wfAtmVbrSarEntry 2 } wfAtmVbrSarCrc10Errors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received SAR_PDUs discarded due to CRC10 error" ::= { wfAtmVbrSarEntry 3 } wfAtmVbrSarCellMidErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received SAR_PDUs discarded due to an invalid MID field value" ::= { wfAtmVbrSarEntry 4 } wfAtmVbrSarCsPduSizeTooBigErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received SAR_PDUs discarded due to CS_PDU size is too big . NOTE: This attribute needs to be moved to router based CS object." ::= { wfAtmVbrSarEntry 5 } wfAtmVbrSarNoBufferErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No CS_PDU assembly buffer space" ::= { wfAtmVbrSarEntry 6 } wfAtmVbrSarComNoProcessErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received COM SAR_PDUs discarded due to lack of an active CS_PDU assembly process" ::= { wfAtmVbrSarEntry 7 } wfAtmVbrSarEomNoProcessErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Received EOM SAR_PDUs discarded due to lack of an active CS_PDU assembly process" ::= { wfAtmVbrSarEntry 8 } wfAtmVbrSarCellSequenceErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of active CS_PDU assembly processes closed (aborted, accumulation discarded) due to detecting a SAR sequence number error in a received SAR_PDU." ::= { wfAtmVbrSarEntry 9 } wfAtmVbrSarCellLengthErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of active CS_PDU assembly processes closed (aborted, accumulation discarded) due to detecting a length field error in a received SAR_PDU." ::= { wfAtmVbrSarEntry 10 } wfAtmVbrSarBomBeforeEomErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of active CS_PDU assembly processes closed (aborted, accumulation discarded) due to receiving a new BOM or SSM SAR_PDU for the same VPI/VCI (and MID) before receiving the EOM SAR_PDU." ::= { wfAtmVbrSarEntry 11 } wfAtmVbrSarTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of active CS_PDU assembly processes closed (aborted, accumulation discarded) due to expiration of the assembly timer." ::= { wfAtmVbrSarEntry 12 } wfAtmVbrSarLengthExceeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of active CS_PDU assembly processes closed (aborted, accumulation discarded) due to receiving more SAR_PDUs (and their payloads) than will fit in the CS_PDU assembly buffer." ::= { wfAtmVbrSarEntry 13 } wfAtmVbrSarReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received SAR_PDUs (all types, i.e. BOM, COM, EOM, SSM) successfully accumulated into a CS_PDU assembly buffer." ::= { wfAtmVbrSarEntry 14 } wfAtmVbrSarTransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of SAR_PDUs (all types, i.e. BOM, COM, EOM, SSM) transmitted to the ATM layer from a CS_PDU segmentation process." ::= { wfAtmVbrSarEntry 15 } wfAtmVbrSarLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmVbrSarEntry 16 } wfAtmVbrSarLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmVbrSarEntry 17 } wfAtmVbrCsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmVbrCsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM VBR CS Table - Router Resident This table contains ATM VBR-AAL, CS Layer parameters, one entry per ATM VBR-AAL object. The counts maintained in this table are totals for the VBR, across all VPI/VCIs within the VBR." ::= { wfAtmGroup 11 } wfAtmVbrCsEntry OBJECT-TYPE SYNTAX WfAtmVbrCsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per linenumber/llindex VBR_CS objects - wfAtmVbrCsLineNumber and wfAtmVbrCsLLIndex corresponds to Wellfleet linenumber/llindex number" INDEX { wfAtmVbrCsLineNumber, wfAtmVbrCsLLIndex } ::= { wfAtmVbrCsTable 1 } WfAtmVbrCsEntry ::= SEQUENCE { wfAtmVbrCsCct INTEGER, wfAtmVbrCsBETagMismatches Counter, wfAtmVbrCsLengthMismatches Counter, wfAtmVbrCsMisdeliveredPdus Counter, wfAtmVbrCsReceives Counter, wfAtmVbrCsTransmits Counter, wfAtmVbrCsLineNumber INTEGER, wfAtmVbrCsLLIndex INTEGER } wfAtmVbrCsCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the VBR_CS object which corresponds to the Wellfleet circuit number" ::= { wfAtmVbrCsEntry 1 } wfAtmVbrCsBETagMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received CS_PDUs discarded due to a mismatch when comparing the BETag fields in the CS_PDU header and trailer." ::= { wfAtmVbrCsEntry 2 } wfAtmVbrCsLengthMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received CS_PDUs discarded due to a mismatch when comparing the CS_PDU header BASize field, the CS_PDU trailer length field and the actual length of the CS_PDU received." ::= { wfAtmVbrCsEntry 3 } wfAtmVbrCsMisdeliveredPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received SAR_PDUs discarded due to an invalid VPI/VCI detected at this layer." ::= { wfAtmVbrCsEntry 4 } wfAtmVbrCsReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the valid CS_PDUs received from the SAR layer and passed on to the next upper layer for further processing." ::= { wfAtmVbrCsEntry 5 } wfAtmVbrCsTransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of CS_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission" ::= { wfAtmVbrCsEntry 6 } wfAtmVbrCsLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmVbrCsEntry 7 } wfAtmVbrCsLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmVbrCsEntry 8 } wfAtmVbrCsVciTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmVbrCsVciEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM VBR CS_VCI Table - Router Resident This table contains ATM VBR-AAL, CS Layer parameters, one entry per ATM VPI/VCI for which information has been recorded per ATM VBR-AAL object." ::= { wfAtmGroup 12 } wfAtmVbrCsVciEntry OBJECT-TYPE SYNTAX WfAtmVbrCsVciEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per virtual circuit VBR_CS objects" INDEX { wfAtmVbrCsVciLineNumber, wfAtmVbrCsVciLLIndex, wfAtmVbrCsVciIndex } ::= { wfAtmVbrCsVciTable 1 } WfAtmVbrCsVciEntry ::= SEQUENCE { wfAtmVbrCsVciVbrCct INTEGER, wfAtmVbrCsVciIndex INTEGER, wfAtmVbrCsVciBETagMismatches Counter, wfAtmVbrCsVciLengthMismatches Counter, wfAtmVbrCsVciMisdeliveredPdus Counter, wfAtmVbrCsVciReceives Counter, wfAtmVbrCsVciTransmits Counter, wfAtmVbrCsVciOctetReceives Counter, wfAtmVbrCsVciOctetTransmits Counter, wfAtmVbrCsVciLineNumber INTEGER, wfAtmVbrCsVciLLIndex INTEGER } wfAtmVbrCsVciVbrCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the VBR_CS object which corresponds to the Wellfleet circuit number" ::= { wfAtmVbrCsVciEntry 1 } wfAtmVbrCsVciIndex OBJECT-TYPE SYNTAX INTEGER(1..8388608) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the VPI/VCI object for which this entry contains information." ::= { wfAtmVbrCsVciEntry 2 } wfAtmVbrCsVciBETagMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received CSVCI_PDUs discarded due to a mismatch when comparing the BETag fields in the CSVCI_PDU header and trailer." ::= { wfAtmVbrCsVciEntry 3 } wfAtmVbrCsVciLengthMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received CSVCI_PDUs discarded due to a mismatch when comparing the CSVCI_PDU header BASize field, the CSVCI_PDU trailer length field and the actual length of the CSVCI_PDU received." ::= { wfAtmVbrCsVciEntry 4 } wfAtmVbrCsVciMisdeliveredPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received SAR_PDUs discarded due to an invalid VPI/VCI detected at this layer." ::= { wfAtmVbrCsVciEntry 5 } wfAtmVbrCsVciReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the valid CSVCI_PDUs received from the SAR layer and passed on to the next upper layer for further processing." ::= { wfAtmVbrCsVciEntry 6 } wfAtmVbrCsVciTransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of CSVCI_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission" ::= { wfAtmVbrCsVciEntry 7 } wfAtmVbrCsVciOctetReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The octet count of the valid CSVCI_PDUs received from the SAR layer and passed on to the next upper layer for further processing." ::= { wfAtmVbrCsVciEntry 8 } wfAtmVbrCsVciOctetTransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of CSVCI_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission" ::= { wfAtmVbrCsVciEntry 9 } wfAtmVbrCsVciLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmVbrCsVciEntry 10 } wfAtmVbrCsVciLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmVbrCsVciEntry 11 } wfAtmMpeTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmMpeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM MPE Table - Router Resident This table contains ATM DXI MPE Layer parameters, one entry per ATM Circuit.The counts maintained in this table are totals for the MPE Layer, across all VPI/VCIs." ::= { wfAtmGroup 13 } wfAtmMpeEntry OBJECT-TYPE SYNTAX WfAtmMpeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per circuit MPE objects - wfAtmMpeIndex corresponds to Wellfleet circuit number" INDEX { wfAtmMpeIndex } ::= { wfAtmMpeTable 1 } WfAtmMpeEntry ::= SEQUENCE { wfAtmMpeIndex INTEGER, wfAtmMpeInvalidNlpids Counter, wfAtmMpeInvalidPids Counter, wfAtmMpeInvalidOuis Counter, wfAtmMpeMisdeliveredPdus Counter, wfAtmMpeUnsupportedControlFields Counter, wfAtmMpeInvalidSAP Counter } wfAtmMpeIndex OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the MPE object for which this entry contains information. This corresponds to the Wellfleet circuit number" ::= { wfAtmMpeEntry 1 } wfAtmMpeInvalidNlpids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received MPE_PDUs discarded due to an unknown or unsupported NLPID" ::= { wfAtmMpeEntry 2 } wfAtmMpeInvalidPids OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received MPE_PDUs discarded due to an unknown or unsupported PID" ::= { wfAtmMpeEntry 3 } wfAtmMpeInvalidOuis OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received MPE_PDUs discarded due to an unknown or unsupported OUI" ::= { wfAtmMpeEntry 4 } wfAtmMpeMisdeliveredPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received MPE_PDUs discarded due to an inactive SAP." ::= { wfAtmMpeEntry 5 } wfAtmMpeUnsupportedControlFields OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received MPE_PDUs discarded due to an unknown or unsupported Control field" ::= { wfAtmMpeEntry 6 } wfAtmMpeInvalidSAP OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The cound of received MPE_PDUs discarded due to either a bad SSAP or DSAP (RFC1483)" ::= { wfAtmMpeEntry 7 } wfAtmPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmPvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM PVC Table - Router Resident This table contains Virtual Circuit configuration and stats parameters, one entry per ATM VPI/PVC for which information has been recorded." ::= { wfAtmGroup 14 } wfAtmPvcEntry OBJECT-TYPE SYNTAX WfAtmPvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per virtual circuit objects" INDEX { wfAtmPvcLineNumber, wfAtmPvcLLIndex, wfAtmPvcVpi, wfAtmPvcVci } ::= { wfAtmPvcTable 1 } WfAtmPvcEntry ::= SEQUENCE { wfAtmPvcDelete INTEGER, wfAtmPvcCct INTEGER, wfAtmPvcVpi INTEGER, wfAtmPvcVci INTEGER, wfAtmPvcReceives Counter, wfAtmPvcTransmits Counter, wfAtmPvcOctetReceives Counter, wfAtmPvcOctetTransmits Counter, wfAtmPvcMode INTEGER, wfAtmPvcDirectAccessCct INTEGER, wfAtmPvcState INTEGER, wfAtmPvcMpeNull INTEGER, wfAtmPvcCsNull INTEGER, wfAtmPvcDisable INTEGER, wfAtmPvcDrops Counter, wfAtmPvcMulticast INTEGER, wfAtmPvcLineNumber INTEGER, wfAtmPvcLLIndex INTEGER } wfAtmPvcDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete an instance of this object. This action will result in a PVC being added or removed from service." DEFVAL { created } ::= { wfAtmPvcEntry 1 } wfAtmPvcCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the object which corresponds to the Wellfleet circuit number" ::= { wfAtmPvcEntry 2 } wfAtmPvcVpi OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The VPI associated with this PVC" ::= { wfAtmPvcEntry 3 } wfAtmPvcVci OBJECT-TYPE SYNTAX INTEGER(32..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The VCI associated with this PVC" ::= { wfAtmPvcEntry 4 } wfAtmPvcReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the valid PVC_PDUs received from the SAR layer and passed on to the next upper layer for further processing." ::= { wfAtmPvcEntry 5 } wfAtmPvcTransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of PVC_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission" ::= { wfAtmPvcEntry 6 } wfAtmPvcOctetReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The octet count of the valid PVC_PDUs received from the SAR layer and passed on to the next upper layer for further processing." ::= { wfAtmPvcEntry 7 } wfAtmPvcOctetTransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The octet count of PVC_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission" ::= { wfAtmPvcEntry 8 } wfAtmPvcMode OBJECT-TYPE SYNTAX INTEGER { groupaccess(1), hybridaccess(2), direct(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The mode of the given VC. GROUP - treats the VC as one of many vc's on a circuit. HYBRID - treats the VC as one of many vc's on a circuit for protocol traffic, but as a separate circuit for bridging. DIRECT - treats the VC as a separate circuit for all applications." DEFVAL { groupaccess } ::= { wfAtmPvcEntry 9 } wfAtmPvcDirectAccessCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Circuit number to use for this VC for hybrid or direct access routing" ::= { wfAtmPvcEntry 10 } wfAtmPvcState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the PVC. The state indicates Not Present when the PVC has been configured but has not been initialized. Init state indicates that the PVC is in the process of being initialized by the system. Up state indicates that the PVC is operating normally. Down state indicates that the PVC is disabled." DEFVAL { notpresent } ::= { wfAtmPvcEntry 11 } wfAtmPvcMpeNull OBJECT-TYPE SYNTAX INTEGER { mpe1294(1), null(2), mpe1483(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to select Null, Multi-Protocol Encapsulation (RFC 1294) or Multi-Protocol Encapsulation (RFC 1483) layer for this PVC. Null is considered VC Based Multiplexing and is not supported for Bridging." DEFVAL { mpe1483 } ::= { wfAtmPvcEntry 12 } wfAtmPvcCsNull OBJECT-TYPE SYNTAX INTEGER { aal34(1), null(2), aal5(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the type of CS_PDU encapsulation supported on the ATM DXI PVC based on the ATM Forum's ATM DXI specification. This configuration is on a per Direct VC basis. The supported values are AAL3/4, AAL5 and Null (no CS_PDU encapsulation). Null is a propriatary configurable value when no CS_PDU encapsulation is desired." DEFVAL { aal5 } ::= { wfAtmPvcEntry 13 } wfAtmPvcDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable a PVC" DEFVAL { enabled } ::= { wfAtmPvcEntry 14 } wfAtmPvcDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of packets dropped on this VC" ::= { wfAtmPvcEntry 15 } wfAtmPvcMulticast OBJECT-TYPE SYNTAX INTEGER { unicast(1), multicast(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether this VPI/VCI is used for multicast or single destination." DEFVAL { unicast } ::= { wfAtmPvcEntry 16 } wfAtmPvcLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmPvcEntry 17 } wfAtmPvcLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmPvcEntry 18 } wfAtmDxiTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmDxiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM DXI Table - An entry in this table is either resident in the Wellfleet MIB or in the Digital Link MIB via the SNMP Proxy. The Component attribute determines local or remote residency. The ATM Data Exchange Interface (DXI) object reflects information about an ATM DXI interface between an ATM DSU and a Router/Host. In particular, it contains both configuration and performance information specific to the DXI (ATM) interface. Each DXI instance typically corresponds to several (ATM) DXIADDRs. The DXI object optionally keeps some information on a per-DXIADDR basis. Each instance of the DXI object typically has only one corresponding ATM -AAL object, but the MIB has been structured so that a DXI may have more than one. It should be noted that in the DXI MIB, the receive (transmit) direction refers to data received from (transmitted to) the ATM interface. With a 23-bit DXIADDR, the range of valid DXIADDR index values is 1 thru 2**23 inclusive. Note that the 23-bit binary DXIADDR field (with values 0 thru 2**23-1) from the Frame Relay header must be incremented by one to yield the DXIADDR index for accessing the tables in the MIB. The DXIADDR consisting of all zeros (with corresponding MIB index value of 1) is reserved for the DXI Local Management Interface (LMI) with the DSU. DxiAddr ::= INTEGER (1..8388608) ** For DL200 and DL3200 DSUs, there is only one ATM DXI per DSU ** and only one AAL object (specifically VBR) per ATM DXI. ** For these products, the mapping between the DXI (Frame Relay) ** DXIADDR and the ATM VPI/VCI is fixed. The LMI DXIADDR has no ** corresponding VPI/VCI. Otherwise, the eight most significant ** bits of the DXIADDR map into the the VPI (the eight most ** significant bits of the VPI/VCI), the fifteen least ** significant bits of the DXIADDR map into the fifteen least ** significant bits of the VCI, and the most significant bit of ** the VCI is set to zero." ::= { wfAtmGroup 15 } wfAtmDxiEntry OBJECT-TYPE SYNTAX WfAtmDxiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per linenumber/llindex ATM DXI objects - wfAtmDxiLineNumber and wfAtmDxiLLIndex corresponds to Wellfleet linenumber/llindex number" INDEX { wfAtmDxiLineNumber, wfAtmDxiLLIndex, wfAtmDxiComponent } ::= { wfAtmDxiTable 1 } WfAtmDxiEntry ::= SEQUENCE { wfAtmDxiCct INTEGER, wfAtmDxiComponent INTEGER, wfAtmDxiMaxLmiPduLengthErrors Counter, wfAtmDxiSeconds Counter, wfAtmDxiDiscardedFrames Counter, wfAtmDxiAbortedFrames Counter, wfAtmDxiNonOctetAlignedFrames Counter, wfAtmDxiTooLongFrames Counter, wfAtmDxiTooShortFrames Counter, wfAtmDxiFrameChecksumErrors Counter, wfAtmDxiFrameHeaderErrors Counter, wfAtmDxiValidFrameReceives Counter, wfAtmDxiFrameTransmits Counter, wfAtmDxiLineNumber INTEGER, wfAtmDxiLLIndex INTEGER } wfAtmDxiCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the ATM DXI cct which corresponds to the Wellfleet circuit number" ::= { wfAtmDxiEntry 1 } wfAtmDxiComponent OBJECT-TYPE SYNTAX INTEGER { router(1), csudsu(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the component where the ATM DXI parameters are resident - either the router or CSU/DSU." ::= { wfAtmDxiEntry 2 } wfAtmDxiMaxLmiPduLengthErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The maximum length of an LMI PDU, measured in octets" ::= { wfAtmDxiEntry 3 } wfAtmDxiSeconds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of seconds elapsed since event counting began or since the counters were last cleared. The implementation may optionally allow this variable to be set. If set, the set value is ignored , and this variable and all other event counters for this object are reset to zero." ::= { wfAtmDxiEntry 4 } wfAtmDxiDiscardedFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of received frames discarded due to lack of buffer space." ::= { wfAtmDxiEntry 5 } wfAtmDxiAbortedFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the received frames aborted (and discarded) before the closing flag" ::= { wfAtmDxiEntry 6 } wfAtmDxiNonOctetAlignedFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the received frames discarded due to not being octet aligned." ::= { wfAtmDxiEntry 7 } wfAtmDxiTooLongFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the received frames discarded due to being longer than the maximum allowed frame length" ::= { wfAtmDxiEntry 8 } wfAtmDxiTooShortFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the received frames discarded due to being shorter than the minimum allowed frame length (less than 6 octets long)" ::= { wfAtmDxiEntry 9 } wfAtmDxiFrameChecksumErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the received frames discarded due to detected checksum error (CRC16)" ::= { wfAtmDxiEntry 10 } wfAtmDxiFrameHeaderErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the received frames discarded due to detected frame relay header errors" ::= { wfAtmDxiEntry 11 } wfAtmDxiValidFrameReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the valid frames received." ::= { wfAtmDxiEntry 12 } wfAtmDxiFrameTransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of CSVCI_PDUs received from upper layers and sent to the SAR layer for segmentation and transmission" ::= { wfAtmDxiEntry 13 } wfAtmDxiLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmDxiEntry 14 } wfAtmDxiLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmDxiEntry 15 } wfAtmDxiDxiAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmDxiDxiAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM DXI DXIADDR Table - Router and CSU/DSU Resident This table contains ATM DXI parameters, one entry per DXI DXIADDR for which information has been recorded per DXI DXIADDR Layer. Since the DXIADDR consisting of all zeros (with corresponding MIB index value of 1) is reserved for the DXI Local Management Interface (LMI) with the DSU, there is always at least one entry in the table. " ::= { wfAtmGroup 16 } wfAtmDxiDxiAddrEntry OBJECT-TYPE SYNTAX WfAtmDxiDxiAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per DXIADDR ATM DXI objects" INDEX { wfAtmDxiDxiAddrLineNumber, wfAtmDxiDxiAddrLLIndex, wfAtmDxiDxiAddrDxiComponent, wfAtmDxiDxiAddrIndex } ::= { wfAtmDxiDxiAddrTable 1 } WfAtmDxiDxiAddrEntry ::= SEQUENCE { wfAtmDxiDxiAddrDxiCct INTEGER, wfAtmDxiDxiAddrDxiComponent INTEGER, wfAtmDxiDxiAddrIndex INTEGER, wfAtmDxiDxiAddrAtmVbr OBJECT IDENTIFIER, wfAtmDxiDxiAddrVpiVci INTEGER, wfAtmDxiDxiAddrReceives Counter, wfAtmDxiDxiAddrTransmits Counter, wfAtmDxiDxiAddrLineNumber INTEGER, wfAtmDxiDxiAddrLLIndex INTEGER } wfAtmDxiDxiAddrDxiCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the Atm Dxi object for which this entry contains information. This attribute corresponds to the Wellfleet circuit number" ::= { wfAtmDxiDxiAddrEntry 1 } wfAtmDxiDxiAddrDxiComponent OBJECT-TYPE SYNTAX INTEGER { router(1), csudsu(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the component where the ATM DXI parameters are resident - either the router or CSU/DSU." ::= { wfAtmDxiDxiAddrEntry 2 } wfAtmDxiDxiAddrIndex OBJECT-TYPE SYNTAX INTEGER(1..8388608) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the DXIADDR object for which this entry contains information." ::= { wfAtmDxiDxiAddrEntry 3 } wfAtmDxiDxiAddrAtmVbr OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The object identifier of the first object in the ATM VBR-AAL MIB which corresponds to this DXIADDR of this DXI port. If there is only one ATM VBR-AAL object associated with this DXI object, then the LMI DXIADDR entry in this table will have a valid value for this variable, even though the LMI DXIADDR has no valid VPI/VCI value.'" ::= { wfAtmDxiDxiAddrEntry 4 } wfAtmDxiDxiAddrVpiVci OBJECT-TYPE SYNTAX INTEGER(1..8388608) ACCESS read-only STATUS mandatory DESCRIPTION "The VPI/VCI of the ATM UNI of the ATM VBR-AAL object which corresponds to this DXIADDR of this DXI port. For the LMI DXIADDR there is no valid VPI/VCI value." ::= { wfAtmDxiDxiAddrEntry 5 } wfAtmDxiDxiAddrReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the valid frames received from the next lower layer and passed on to the next upper layer for further processing." ::= { wfAtmDxiDxiAddrEntry 6 } wfAtmDxiDxiAddrTransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of frames received from upper layers and sent to the next lower layer for transmission" ::= { wfAtmDxiDxiAddrEntry 7 } wfAtmDxiDxiAddrLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the line number of the Wellfleet router." ::= { wfAtmDxiDxiAddrEntry 8 } wfAtmDxiDxiAddrLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer." ::= { wfAtmDxiDxiAddrEntry 9 } wfAtmInterfaceConfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains ATM local interface configuration parameters, one entry per ATM interface port, beyond those supported using the ifTable." ::= { wfAtmCommonGroup 1 } wfAtmInterfaceConfEntry OBJECT-TYPE SYNTAX WfAtmInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmInterfaceConfIndex } ::= { wfAtmInterfaceConfTable 1 } WfAtmInterfaceConfEntry ::= SEQUENCE { wfAtmInterfaceConfDelete INTEGER, wfAtmInterfaceConfIndex INTEGER, wfAtmInterfaceAdminStatus INTEGER, wfAtmInterfaceOperStatus INTEGER, wfAtmInterfaceMaxVpcs INTEGER, wfAtmInterfaceMaxVccs INTEGER, wfAtmInterfaceConfVpcs INTEGER, wfAtmInterfaceConfVccs INTEGER, wfAtmInterfaceMaxActiveVpiBits INTEGER, wfAtmInterfaceMaxActiveVciBits INTEGER, wfAtmInterfaceIlmiVpi INTEGER, wfAtmInterfaceIlmiVci INTEGER, wfAtmInterfaceAddressType INTEGER, wfAtmInterfaceCct INTEGER, wfAtmInterfaceDrops Counter, wfAtmInterfaceSigEnable INTEGER, wfAtmInterfaceDebug INTEGER, wfAtmInterfaceUseHwMacAddr INTEGER, wfAtmInterfaceHwMacOverride OCTET STRING } wfAtmInterfaceConfDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmInterfaceConfEntry 1 } wfAtmInterfaceConfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface (port) that contains the appropriate management information." ::= { wfAtmInterfaceConfEntry 2 } wfAtmInterfaceAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the desired administrative state of the Interface. The up and down states indicate that the traffic flow is enabled and disabled respectively for the VCL." DEFVAL { up } ::= { wfAtmInterfaceConfEntry 3 } wfAtmInterfaceOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current operational status of the Interface. The up and down states indicate that the Interface is currently operational, or not operational, respectively. The Init state indicates the status of the Interface is in the process of being initialized and has not yet completed. The 'Not Present' state indicates a problem with that Interface and is not able to bring the Interface up." DEFVAL { notpresent } ::= { wfAtmInterfaceConfEntry 4 } wfAtmInterfaceMaxVpcs OBJECT-TYPE SYNTAX INTEGER(1..4096) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of VPCs supported at the ATM interface." DEFVAL { 256 } ::= { wfAtmInterfaceConfEntry 5 } wfAtmInterfaceMaxVccs OBJECT-TYPE SYNTAX INTEGER(1..65536) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of VCCs supported at the ATM interface." DEFVAL { 65536 } ::= { wfAtmInterfaceConfEntry 6 } wfAtmInterfaceConfVpcs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of VPCs configured for use at the ATM interface." ::= { wfAtmInterfaceConfEntry 7 } wfAtmInterfaceConfVccs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of VCCs configured for use at the ATM interface." ::= { wfAtmInterfaceConfEntry 8 } wfAtmInterfaceMaxActiveVpiBits OBJECT-TYPE SYNTAX INTEGER(1..12) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of active VPI bits configured for use at the ATM interface." DEFVAL { 8 } ::= { wfAtmInterfaceConfEntry 9 } wfAtmInterfaceMaxActiveVciBits OBJECT-TYPE SYNTAX INTEGER(1..16) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of active VCI bits configured for use at the ATM interface." DEFVAL { 16 } ::= { wfAtmInterfaceConfEntry 10 } wfAtmInterfaceIlmiVpi OBJECT-TYPE SYNTAX INTEGER { default(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface. Subract 1 from the default! (ILMI VPI = 0)." DEFVAL { default } ::= { wfAtmInterfaceConfEntry 11 } wfAtmInterfaceIlmiVci OBJECT-TYPE SYNTAX INTEGER { default(16) } ACCESS read-write STATUS mandatory DESCRIPTION "The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface." DEFVAL { default } ::= { wfAtmInterfaceConfEntry 12 } wfAtmInterfaceAddressType OBJECT-TYPE SYNTAX INTEGER { private(1), nsape164(2), nativee164(3), other(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of ATM address configured for use at the ATM interface." ::= { wfAtmInterfaceConfEntry 13 } wfAtmInterfaceCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Wellfleet circuit number of this entry" ::= { wfAtmInterfaceConfEntry 14 } wfAtmInterfaceDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The cumulative count of packet drops on this ATM Interface above the SSCS layer." ::= { wfAtmInterfaceConfEntry 15 } wfAtmInterfaceSigEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Spawning of ATM Signalling by the Control gate is determined by this attr" DEFVAL { disabled } ::= { wfAtmInterfaceConfEntry 16 } wfAtmInterfaceDebug OBJECT-TYPE SYNTAX INTEGER { disabled(1), msgs(2), msgsIn(4), msgsOut(8), appMsgs(16), drvMsgs(32), trilMsgs(64), pvcFsm(128), svcFsm(256), oam(512), all(2147483647) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging (default) 2 - enable Signalling Layer Manager inbound and outbound messages 4 - enable CC inbound messages 8 - enable CC outbound messages 16 - enable CC<->APP messages 32 - enable CC<->DRV messages 64 - enable CC<->TRILL messages 128 - enable CC PVC Interface FSM messages 256 - enable CC PVC Interface FSM messages 4294967295 - All of the above" DEFVAL { disabled } ::= { wfAtmInterfaceConfEntry 17 } wfAtmInterfaceUseHwMacAddr OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this is enabled, then the auto-generated ESI portion of the ATM address user suffix will be supplied by the hardware driver. If disabled, it will come from wfAtmInterfaceHwMacOverride." DEFVAL { enabled } ::= { wfAtmInterfaceConfEntry 18 } wfAtmInterfaceHwMacOverride OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "If wfAtmInterfaceUseHwMacAddr is disabled, this 48-bit Mac address will replace the hardware driver's address during auto-generation of the ESI portion of the ATM address user suffix." ::= { wfAtmInterfaceConfEntry 19 } wfAtmServiceRecordTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmServiceRecordEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains ATM service record configuration parameters, one entry per ATM Wellfleet cct." ::= { wfAtmCommonGroup 2 } wfAtmServiceRecordEntry OBJECT-TYPE SYNTAX WfAtmServiceRecordEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmServiceRecordIndex, wfAtmServiceRecordCct } ::= { wfAtmServiceRecordTable 1 } WfAtmServiceRecordEntry ::= SEQUENCE { wfAtmServiceRecordDelete INTEGER, wfAtmServiceRecordEnable INTEGER, wfAtmServiceRecordIndex INTEGER, wfAtmServiceRecordCct INTEGER, wfAtmServiceRecordAalEncapsType INTEGER, wfAtmServiceRecordState INTEGER, wfAtmServiceRecordVcType INTEGER, wfAtmServiceRecordNetworkPrefix OCTET STRING, wfAtmServiceRecordUserSuffix OCTET STRING, wfAtmServiceRecordAtmAddress OCTET STRING, wfAtmServiceRecordFlag INTEGER, wfAtmServiceRecordMtu INTEGER, wfAtmServiceRecordLossPriorityPolicy INTEGER, wfAtmServiceRecordDebug INTEGER, wfAtmServiceRecordName DisplayString, wfAtmServiceRecordWanSvcRoutingMode INTEGER } wfAtmServiceRecordDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmServiceRecordEntry 1 } wfAtmServiceRecordEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable MIB instance parameter." DEFVAL { enabled } ::= { wfAtmServiceRecordEntry 2 } wfAtmServiceRecordIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface (port) that contains the appropriate port information." ::= { wfAtmServiceRecordEntry 3 } wfAtmServiceRecordCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Wellfleet circuit number of this entry" ::= { wfAtmServiceRecordEntry 4 } wfAtmServiceRecordAalEncapsType OBJECT-TYPE SYNTAX INTEGER { routedproto(1), bridged8023(2), bridged8025(3), bridged8026(4), lane8023(5), lane8025(6), llcencaps(7), frsscs(8), other(9), unknown(10), frinterwork(11), mpsencaps(12) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_SERVICEREC_ENCAPS_LLCENCAPS - RFC1483 ATM_SERVICEREC_ENCAPS_FRSSCS - RFC1294 ATM_SERVICEREC_ENCAPS_ROUTEDPROTO - NONE" DEFVAL { llcencaps } ::= { wfAtmServiceRecordEntry 5 } wfAtmServiceRecordState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), reject(4), notpresent(5), oamlost(6) } ACCESS read-only STATUS mandatory DESCRIPTION "State of Service Record" DEFVAL { notpresent } ::= { wfAtmServiceRecordEntry 6 } wfAtmServiceRecordVcType OBJECT-TYPE SYNTAX INTEGER { pvc(1), svc(2), control(3), muxedSvc(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of VC for each encapsulation. Applicable for LLC and null type encapsulation enforced from SM - aks. 'muxedSvc' indicates SVCs that can be shared between applications for encapsulations that support muxing. 'control' should not a configurable option. It is defined for consistency with wfAtmVclVcType" DEFVAL { pvc } ::= { wfAtmServiceRecordEntry 7 } wfAtmServiceRecordNetworkPrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE (13)) ACCESS read-write STATUS mandatory DESCRIPTION "ATM Address Network portion" ::= { wfAtmServiceRecordEntry 8 } wfAtmServiceRecordUserSuffix OBJECT-TYPE SYNTAX OCTET STRING (SIZE (7)) ACCESS read-write STATUS mandatory DESCRIPTION "ATM Address User portion" ::= { wfAtmServiceRecordEntry 9 } wfAtmServiceRecordAtmAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "ATM Address Complete - Inserted by Router after verification of network and user portions" ::= { wfAtmServiceRecordEntry 10 } wfAtmServiceRecordFlag OBJECT-TYPE SYNTAX INTEGER { autoaddr(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This will be used for internal purposes to have Site Manager flag specific configurations." DEFVAL { autoaddr } ::= { wfAtmServiceRecordEntry 11 } wfAtmServiceRecordMtu OBJECT-TYPE SYNTAX INTEGER(0..9188) ACCESS read-write STATUS mandatory DESCRIPTION "The size of the largest packet to be used for send/receive on all logical interfaces defined on this service record. This attribute is an alias for 'ifMtu'." ::= { wfAtmServiceRecordEntry 12 } wfAtmServiceRecordLossPriorityPolicy OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This is relevant only for Frame Relay Switch product. This indicates the policy for translating FR DE to ATM CLP on IP truks over ATM. " DEFVAL { disabled } ::= { wfAtmServiceRecordEntry 13 } wfAtmServiceRecordDebug OBJECT-TYPE SYNTAX INTEGER { disabled(1), pvcFsm(2), svcFsm(4), llcSvcMux(8), all(2147483647) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging (default) 2 - enable Service State Machine debugging 4294967295 - All of the above" DEFVAL { disabled } ::= { wfAtmServiceRecordEntry 14 } wfAtmServiceRecordName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "User name for circuit" ::= { wfAtmServiceRecordEntry 15 } wfAtmServiceRecordWanSvcRoutingMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), normal(2), dialOptimized(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This applies ONLY to WAN SVC type ATM service records. It specifies the route updates mode for the WAN SVCs." DEFVAL { disabled } ::= { wfAtmServiceRecordEntry 16 } wfAtmSVCOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmSVCOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains ATM WAN SVC configuration parameters, one entry for each remote ATM destination for which user wishes to specify some/all of the VC config parameters." ::= { wfAtmCommonGroup 13 } wfAtmSVCOptionsEntry OBJECT-TYPE SYNTAX WfAtmSVCOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmSVCOptionsCct, wfAtmSVCOptionsIndex } ::= { wfAtmSVCOptionsTable 1 } WfAtmSVCOptionsEntry ::= SEQUENCE { wfAtmSVCOptionsDelete INTEGER, wfAtmSVCOptionsDisable INTEGER, wfAtmSVCOptionsCct INTEGER, wfAtmSVCOptionsIndex INTEGER, wfAtmSVCOptionsAdjHostAtmAddr OCTET STRING, wfAtmSVCOptionsXmtPeakCellRate INTEGER, wfAtmSVCOptionsXmtSustCellRate INTEGER, wfAtmSVCOptionsRcvPeakCellRate INTEGER, wfAtmSVCOptionsRcvSustCellRate INTEGER } wfAtmSVCOptionsDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmSVCOptionsEntry 1 } wfAtmSVCOptionsDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable MIB instance parameter." DEFVAL { enabled } ::= { wfAtmSVCOptionsEntry 2 } wfAtmSVCOptionsCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit Number to which this SVC Options Entry belongs to. (Instance Id 1)" ::= { wfAtmSVCOptionsEntry 3 } wfAtmSVCOptionsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Sequential index number assigned by configuration tool (Instance Id 2)" ::= { wfAtmSVCOptionsEntry 4 } wfAtmSVCOptionsAdjHostAtmAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "ATM Address of the adjacent host to which these SVC config parameters apply." ::= { wfAtmSVCOptionsEntry 5 } wfAtmSVCOptionsXmtPeakCellRate OBJECT-TYPE SYNTAX INTEGER { default(4716) } ACCESS read-write STATUS mandatory DESCRIPTION "Forward Peak Cell Rate (in cells/sec) of the SVC to this adjacent host" DEFVAL { default } ::= { wfAtmSVCOptionsEntry 6 } wfAtmSVCOptionsXmtSustCellRate OBJECT-TYPE SYNTAX INTEGER { default(4716) } ACCESS read-write STATUS mandatory DESCRIPTION "Forward Sustainable Cell Rate (in cells/sec) of the SVC to this adjacent host" DEFVAL { default } ::= { wfAtmSVCOptionsEntry 7 } wfAtmSVCOptionsRcvPeakCellRate OBJECT-TYPE SYNTAX INTEGER { default(4716) } ACCESS read-write STATUS mandatory DESCRIPTION "Backward Peak Cell Rate (in cells/sec) of the SVC to this adjacent host" DEFVAL { default } ::= { wfAtmSVCOptionsEntry 8 } wfAtmSVCOptionsRcvSustCellRate OBJECT-TYPE SYNTAX INTEGER { default(4716) } ACCESS read-write STATUS mandatory DESCRIPTION "Backward Sustainable Cell Rate (in cells/sec) of the SVC to this adjacent host" DEFVAL { default } ::= { wfAtmSVCOptionsEntry 9 } wfAtmVclConfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmVclConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { wfAtmCommonGroup 5 } wfAtmVclConfEntry OBJECT-TYPE SYNTAX WfAtmVclConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmVclConfIndex, wfAtmVclConfVpi, wfAtmVclConfVci } ::= { wfAtmVclConfTable 1 } WfAtmVclConfEntry ::= SEQUENCE { wfAtmVclConfDelete INTEGER, wfAtmVclConfIndex INTEGER, wfAtmVclConfVpi INTEGER, wfAtmVclConfVci INTEGER, wfAtmVclAdminStatus INTEGER, wfAtmVclOperStatus INTEGER, wfAtmVclLastChange TimeTicks, wfAtmVclXmtPeakCellRate INTEGER, wfAtmVclXmtSustainableCellRate INTEGER, wfAtmVclXmtBurstSize INTEGER, wfAtmVclXmtQosClass INTEGER, wfAtmVclRcvPeakCellRate INTEGER, wfAtmVclRcvSustainableCellRate INTEGER, wfAtmVclRcvBurstSize INTEGER, wfAtmVclRcvQosClass INTEGER, wfAtmVclAalType INTEGER, wfAtmVclAalCpcsTransmitSduSize INTEGER, wfAtmVclAalCpcsReceiveSduSize INTEGER, wfAtmVclAalEncapsType INTEGER, wfAtmVclCongestionIndication INTEGER, wfAtmVclCellLossPriority INTEGER, wfAtmVclCct INTEGER, wfAtmVclDirectAccessCct INTEGER, wfAtmVclMulticast INTEGER, wfAtmVclMode INTEGER, wfAtmVclDrops Counter, wfAtmVclVcIndex INTEGER, wfAtmVclVcType INTEGER, wfAtmVclXmtTagging INTEGER, wfAtmVclRcvTagging INTEGER, wfAtmVclOamLpbkEnable INTEGER, wfAtmVclOamLpbkCellInterval INTEGER, wfAtmVclOamLpbkThreshold1 INTEGER, wfAtmVclOamLpbkThreshold2 INTEGER, wfAtmVclOamAlarmEnable INTEGER, wfAtmVclVcGroup INTEGER, wfAtmVclServiceClass INTEGER } wfAtmVclConfDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmVclConfEntry 1 } wfAtmVclConfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface (port) that contains the appropriate management information." ::= { wfAtmVclConfEntry 2 } wfAtmVclConfVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVpiBits." ::= { wfAtmVclConfEntry 3 } wfAtmVclConfVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the wfAtmInterfaceMaxActiveVciBits." ::= { wfAtmVclConfEntry 4 } wfAtmVclAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the desired administrative state of the VCL. The up and down states indicate that the traffic flow is enabled and disabled respectively for the VCL." DEFVAL { up } ::= { wfAtmVclConfEntry 5 } wfAtmVclOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4), oamlost(5), misconfig(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current operational status of the VCL. The up and down states indicate that the VCL is currently operational, or not operational, respectively. The Init state indicates the status of the VCL is in the process of being initialized and has not yet completed. The 'Not Present' state indicates a problem with that VCL and is not able to bring the VCC up. The 'misconfig' state indicates the VC is misconfigured." DEFVAL { notpresent } ::= { wfAtmVclConfEntry 6 } wfAtmVclLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of MIBII's sysUpTime at the time this VCL entered its current operational state. If the current state was entered prior to the last re-initialization of the agent then this object contains a zero value." ::= { wfAtmVclConfEntry 7 } wfAtmVclXmtPeakCellRate OBJECT-TYPE SYNTAX INTEGER { default(4716) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit (Forward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection." DEFVAL { default } ::= { wfAtmVclConfEntry 8 } wfAtmVclXmtSustainableCellRate OBJECT-TYPE SYNTAX INTEGER { default(4716) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit (Forward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average rate' is the number of cells transmitted divided by the 'duration of the connection'." DEFVAL { default } ::= { wfAtmVclConfEntry 9 } wfAtmVclXmtBurstSize OBJECT-TYPE SYNTAX INTEGER { default(40) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit (Forward) Burst Size in cells." DEFVAL { default } ::= { wfAtmVclConfEntry 10 } wfAtmVclXmtQosClass OBJECT-TYPE SYNTAX INTEGER { class0(1), class1(2), class2(3), class3(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit (Forward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0" DEFVAL { class3 } ::= { wfAtmVclConfEntry 11 } wfAtmVclRcvPeakCellRate OBJECT-TYPE SYNTAX INTEGER { default(4716) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive (Backward) Peak Cell Rate in cells/second. This specifies the upper bound on the traffic that can be submitted on an ATM connection." DEFVAL { default } ::= { wfAtmVclConfEntry 12 } wfAtmVclRcvSustainableCellRate OBJECT-TYPE SYNTAX INTEGER { default(4716) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive (Backward) Sustainable Cell Rate in cells/second. This specifies the upper bound on the conforming average rate of an ATM connection, where 'average rate' is the number of cells transmitted divided by the 'duration of the connection'." DEFVAL { default } ::= { wfAtmVclConfEntry 13 } wfAtmVclRcvBurstSize OBJECT-TYPE SYNTAX INTEGER { default(40) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive (Backward) Burst Size in cells." DEFVAL { default } ::= { wfAtmVclConfEntry 14 } wfAtmVclRcvQosClass OBJECT-TYPE SYNTAX INTEGER { class0(1), class1(2), class2(3), class3(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive (Backward) Quality of Service as specified in Appendix A, Section 4 of the ATM Forum UNI Specification, Version 3.0" DEFVAL { class3 } ::= { wfAtmVclConfEntry 15 } wfAtmVclAalType OBJECT-TYPE SYNTAX INTEGER { type1(1), type34(2), type5(3), other(4), unknown(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of AAL used on the VCL." DEFVAL { type5 } ::= { wfAtmVclConfEntry 16 } wfAtmVclAalCpcsTransmitSduSize OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum AAL CPCS SDU size in octets that is supported on the transmit direction of this VCC." DEFVAL { 4608 } ::= { wfAtmVclConfEntry 17 } wfAtmVclAalCpcsReceiveSduSize OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum AAL CPCS SDU size in octets that is supported on the receive direction of this VCC." DEFVAL { 4608 } ::= { wfAtmVclConfEntry 18 } wfAtmVclAalEncapsType OBJECT-TYPE SYNTAX INTEGER { routedproto(1), bridged8023(2), bridged8025(3), bridged8026(4), lane8023(5), lane8025(6), llcencaps(7), frsscs(8), other(9), unknown(10) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of data encapsulation used over both AAL3/4 and AAL5 SSCS layer. Currently, the only values supported are : ATM_VCLENCAPS_LLCENCAPS - RFC1483 ATM_VCLENCAPS_ROUTEDPROTO - NONE" DEFVAL { llcencaps } ::= { wfAtmVclConfEntry 19 } wfAtmVclCongestionIndication OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the Congestion Indication (CI) bit in the payload field of each ATM cell for this VCL." DEFVAL { off } ::= { wfAtmVclConfEntry 20 } wfAtmVclCellLossPriority OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), drop-preference(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the Cell Loss Priority (CLP) bit in the ATM header of each cell for this VCL. For 'drop-preference', the CLP bit will be set if the internal drop preference bit is set." DEFVAL { off } ::= { wfAtmVclConfEntry 21 } wfAtmVclCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the object which corresponds to the Wellfleet circuit number" ::= { wfAtmVclConfEntry 22 } wfAtmVclDirectAccessCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Circuit number to use for this VC for hybrid or direct access routing" ::= { wfAtmVclConfEntry 23 } wfAtmVclMulticast OBJECT-TYPE SYNTAX INTEGER { unicast(1), multicast(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether this VPI/VCI is used for multicast or single destination." DEFVAL { unicast } ::= { wfAtmVclConfEntry 24 } wfAtmVclMode OBJECT-TYPE SYNTAX INTEGER { groupaccess(1), hybridaccess(2), direct(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The mode of the given VC. GROUP - treats the VC as one of many vc's on a circuit. HYBRID - treats the VC as one of many vc's on a circuit for protocol traffic, but as a separate circuit for bridging. DIRECT - treats the VC as a separate circuit for all applications." DEFVAL { groupaccess } ::= { wfAtmVclConfEntry 25 } wfAtmVclDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of packets above the SSCS layer dropped on this VC" ::= { wfAtmVclConfEntry 26 } wfAtmVclVcIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Driver-defined VCI for quick table lookup" ::= { wfAtmVclConfEntry 27 } wfAtmVclVcType OBJECT-TYPE SYNTAX INTEGER { permanent(1), switched(2), control(3), switchedMux(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of VC can be either permanent or switched. Only permanent VCs can be modfied. switchedMux is same as switched but is included here to be consistent with wfAtmServiceRecordVcType" DEFVAL { permanent } ::= { wfAtmVclConfEntry 28 } wfAtmVclXmtTagging OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Tagging forward VC messages if peak/sustainable rates exceeded" DEFVAL { off } ::= { wfAtmVclConfEntry 29 } wfAtmVclRcvTagging OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Tagging backward VC messages if peak/sustainable rates exceeded" DEFVAL { off } ::= { wfAtmVclConfEntry 30 } wfAtmVclOamLpbkEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION " PVC OAM F5 Loopback function. " DEFVAL { disable } ::= { wfAtmVclConfEntry 31 } wfAtmVclOamLpbkCellInterval OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION " This is the time interval between two consecutive OAM loopback cells in numbers of second. " DEFVAL { 5 } ::= { wfAtmVclConfEntry 32 } wfAtmVclOamLpbkThreshold1 OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This is the number of consecutive loopback OAM cells lost before the VC connection is declared down." DEFVAL { 1 } ::= { wfAtmVclConfEntry 33 } wfAtmVclOamLpbkThreshold2 OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This is the number of consecutive loopback OAM cells received before the VC connection is declared up." DEFVAL { 2 } ::= { wfAtmVclConfEntry 34 } wfAtmVclOamAlarmEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION " PVC OAM F5 alarm function. " DEFVAL { disable } ::= { wfAtmVclConfEntry 35 } wfAtmVclVcGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The group of VCs this VC is a member of. All VCs in a given group will have the same VcGroup." ::= { wfAtmVclConfEntry 36 } wfAtmVclServiceClass OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-write STATUS mandatory DESCRIPTION "The internal service class of the traffic this VC will carry" ::= { wfAtmVclConfEntry 37 } wfAtmVclStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmVclStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { wfAtmCommonGroup 6 } wfAtmVclStatsEntry OBJECT-TYPE SYNTAX WfAtmVclStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmVclStatsIndex, wfAtmVclStatsVpi, wfAtmVclStatsVci } ::= { wfAtmVclStatsTable 1 } WfAtmVclStatsEntry ::= SEQUENCE { wfAtmVclStatsIndex INTEGER, wfAtmVclStatsVpi INTEGER, wfAtmVclStatsVci INTEGER, wfAtmVclStatsVcIndex INTEGER, wfAtmVclXmtCells OCTET STRING, wfAtmVclRcvCells OCTET STRING, wfAtmVclRcvSequenceNumErrs Counter, wfAtmVclRcvInvalidLenErrs Counter, wfAtmVclRcvMissingEomErrs Counter, wfAtmVclRcvBufferOflowErrs Counter, wfAtmVclRcvMaxLenExceedErrs Counter, wfAtmVclRcvTrailerErrs Counter, wfAtmVclRcvAbortErrs Counter, wfAtmVclRcvPacketLengthErrs Counter, wfAtmVclRcvReassemAbortErrs Counter, wfAtmVclRcvCrcErrs Counter, wfAtmVclXmtOamCells Counter, wfAtmVclRcvOamCells Counter, wfAtmVclRcvOamCrcErrs Counter } wfAtmVclStatsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface that contains the appropriate management information." ::= { wfAtmVclStatsEntry 1 } wfAtmVclStatsVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Path Identifier (VPI) value of the VCL." ::= { wfAtmVclStatsEntry 2 } wfAtmVclStatsVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Virtual Channel Identifier (VCI) value of the VCL." ::= { wfAtmVclStatsEntry 3 } wfAtmVclStatsVcIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the virtual channel connection." ::= { wfAtmVclStatsEntry 4 } wfAtmVclXmtCells OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Accumulated total of user cells transmitted for this VCL. This attribute is a 64-bit counter. Does not include OAM cells." ::= { wfAtmVclStatsEntry 5 } wfAtmVclRcvCells OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Accumulated total of user cells received for this VCL. This attribute is a 64-bit counter. Does not include OAM cells." ::= { wfAtmVclStatsEntry 6 } wfAtmVclRcvSequenceNumErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times data was being reassembled and a SAR Protocol Data Unit (PDU) was received out of order for this VCL. This count is valid only when the adaptation layer protocol is AAL 3/4." ::= { wfAtmVclStatsEntry 7 } wfAtmVclRcvInvalidLenErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmVclStatsEntry 8 } wfAtmVclRcvMissingEomErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmVclStatsEntry 9 } wfAtmVclRcvBufferOflowErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmVclStatsEntry 10 } wfAtmVclRcvMaxLenExceedErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmVclStatsEntry 11 } wfAtmVclRcvTrailerErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmVclStatsEntry 12 } wfAtmVclRcvAbortErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmVclStatsEntry 13 } wfAtmVclRcvPacketLengthErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmVclStatsEntry 14 } wfAtmVclRcvReassemAbortErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmVclStatsEntry 15 } wfAtmVclRcvCrcErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmVclStatsEntry 16 } wfAtmVclXmtOamCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of OAM cells transmitted successfully." ::= { wfAtmVclStatsEntry 17 } wfAtmVclRcvOamCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of OAM cells received successfully." ::= { wfAtmVclStatsEntry 18 } wfAtmVclRcvOamCrcErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of OAM cells received with CRC10 error." ::= { wfAtmVclStatsEntry 19 } wfAtmSigTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmSigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table includes the ATM Signalling MIB record for Q.93B" ::= { wfAtmCommonGroup 7 } wfAtmSigEntry OBJECT-TYPE SYNTAX WfAtmSigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry contains attributes needed for ATM Q.93B" INDEX { wfAtmSigLineNumber } ::= { wfAtmSigTable 1 } WfAtmSigEntry ::= SEQUENCE { wfAtmSigDelete INTEGER, wfAtmSigDisable INTEGER, wfAtmSigLineNumber INTEGER, wfAtmSigAtmCct INTEGER, wfAtmSigState INTEGER, wfAtmSigMaxServiceUsers INTEGER, wfAtmSigMaxPtPtConnections INTEGER, wfAtmSigMaxPtMultConnections INTEGER, wfAtmSigMaxPartiesInMultConnect INTEGER, wfAtmSigMaxRoutingRegistrations INTEGER, wfAtmSigMinBufferThreshold INTEGER, wfAtmSigTimerResolution INTEGER, wfAtmSigVpi INTEGER, wfAtmSigVci INTEGER, wfAtmSigStandard INTEGER, wfAtmSigInterfaceType INTEGER, wfAtmSigMinVciPtPt INTEGER, wfAtmSigMaxVciPtPt INTEGER, wfAtmSigMinVpiPtPt INTEGER, wfAtmSigMaxVpiPtPt INTEGER, wfAtmSigMinVciPtMltPt INTEGER, wfAtmSigMaxVciPtMltPt INTEGER, wfAtmSigMinVpiPtMltPt INTEGER, wfAtmSigMaxVpiPtMltPt INTEGER, wfAtmSigT303 INTEGER, wfAtmSigT308 INTEGER, wfAtmSigT309 INTEGER, wfAtmSigT310 INTEGER, wfAtmSigT313 INTEGER, wfAtmSigT316 INTEGER, wfAtmSigT316c INTEGER, wfAtmSigT322 INTEGER, wfAtmSigTDisc INTEGER, wfAtmSigT398 INTEGER, wfAtmSigT399 INTEGER, wfAtmSigNumRst INTEGER, wfAtmSigNumStat INTEGER, wfAtmSigRestart INTEGER, wfAtmSigDebug INTEGER, wfAtmSigCallsSec INTEGER, wfAtmSigT301 INTEGER, wfAtmSigT304 INTEGER, wfAtmSigT397 INTEGER } wfAtmSigDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created." DEFVAL { created } ::= { wfAtmSigEntry 1 } wfAtmSigDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter" DEFVAL { enabled } ::= { wfAtmSigEntry 2 } wfAtmSigLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value is the line number of the router." ::= { wfAtmSigEntry 3 } wfAtmSigAtmCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit number of ATM driver associated with this Q.93B instance" ::= { wfAtmSigEntry 4 } wfAtmSigState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the Q.93B entity" DEFVAL { notpresent } ::= { wfAtmSigEntry 5 } wfAtmSigMaxServiceUsers OBJECT-TYPE SYNTAX INTEGER(1..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Max number of SAPs (service access points) allowed for users to connect" DEFVAL { 20 } ::= { wfAtmSigEntry 6 } wfAtmSigMaxPtPtConnections OBJECT-TYPE SYNTAX INTEGER(1..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Max number of simultaneous point to point connections allowed per port" DEFVAL { 1000 } ::= { wfAtmSigEntry 7 } wfAtmSigMaxPtMultConnections OBJECT-TYPE SYNTAX INTEGER(1..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Max number of simultaneous point to multipt connections allowed per port" DEFVAL { 40 } ::= { wfAtmSigEntry 8 } wfAtmSigMaxPartiesInMultConnect OBJECT-TYPE SYNTAX INTEGER(1..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Max number of simultaneous parties in a point to multipoint connection" DEFVAL { 1 } ::= { wfAtmSigEntry 9 } wfAtmSigMaxRoutingRegistrations OBJECT-TYPE SYNTAX INTEGER(1..32767) ACCESS read-write STATUS mandatory DESCRIPTION "Max number of registrations / routing entries allowed per port" ::= { wfAtmSigEntry 10 } wfAtmSigMinBufferThreshold OBJECT-TYPE SYNTAX INTEGER(1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Min percentage of buffer pool that must be free to enable new calls (sub)" DEFVAL { 2 } ::= { wfAtmSigEntry 11 } wfAtmSigTimerResolution OBJECT-TYPE SYNTAX INTEGER(0..255000) ACCESS read-write STATUS mandatory DESCRIPTION "Number of system ticks elapsed between successive timer events in tenths" DEFVAL { 1024 } ::= { wfAtmSigEntry 12 } wfAtmSigVpi OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Virtual Path Identifier for the Signalling VC" ::= { wfAtmSigEntry 13 } wfAtmSigVci OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Virtual Channel Identifier for the Signalling VC" DEFVAL { 5 } ::= { wfAtmSigEntry 14 } wfAtmSigStandard OBJECT-TYPE SYNTAX INTEGER { v30(1), v31(2), v40(3), sym(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Sig Protocol Standard, Uni3.0, Uni3.1, or Trillium Symmetrical Uni (sub)" DEFVAL { v30 } ::= { wfAtmSigEntry 15 } wfAtmSigInterfaceType OBJECT-TYPE SYNTAX INTEGER { user(1), network(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Network Interface type, either USER or NETWORK side (sub)" DEFVAL { user } ::= { wfAtmSigEntry 16 } wfAtmSigMinVciPtPt OBJECT-TYPE SYNTAX INTEGER(32..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Minimum VCI number that can be associated with a Point to Point VC" DEFVAL { 32 } ::= { wfAtmSigEntry 17 } wfAtmSigMaxVciPtPt OBJECT-TYPE SYNTAX INTEGER(32..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum VCI number that can be associated with a Point to Point VC" DEFVAL { 65535 } ::= { wfAtmSigEntry 18 } wfAtmSigMinVpiPtPt OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Minimum VPI number that can be associated with a Point to Point VC" ::= { wfAtmSigEntry 19 } wfAtmSigMaxVpiPtPt OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum VPI number that can be associated with a Point to Point VC" ::= { wfAtmSigEntry 20 } wfAtmSigMinVciPtMltPt OBJECT-TYPE SYNTAX INTEGER(32..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Minimum VCI number that can be associated with a Point to Multipoint VC" DEFVAL { 32 } ::= { wfAtmSigEntry 21 } wfAtmSigMaxVciPtMltPt OBJECT-TYPE SYNTAX INTEGER(32..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum VCI number that can be associated with a Point to Multipoint VC" DEFVAL { 65535 } ::= { wfAtmSigEntry 22 } wfAtmSigMinVpiPtMltPt OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Minimum VPI number that can be associated with a Point to Multipoint VC" ::= { wfAtmSigEntry 23 } wfAtmSigMaxVpiPtMltPt OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum VPI number that can be associated with a Point to Multipoint VC" ::= { wfAtmSigEntry 24 } wfAtmSigT303 OBJECT-TYPE SYNTAX INTEGER(1..24) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Setup Sent Timer" DEFVAL { 4 } ::= { wfAtmSigEntry 25 } wfAtmSigT308 OBJECT-TYPE SYNTAX INTEGER(1..180) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Release Sent Timer" DEFVAL { 30 } ::= { wfAtmSigEntry 26 } wfAtmSigT309 OBJECT-TYPE SYNTAX INTEGER(1..540) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B - SAAL Data Link Connect Timer" DEFVAL { 10 } ::= { wfAtmSigEntry 27 } wfAtmSigT310 OBJECT-TYPE SYNTAX INTEGER(1..60) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Call Proceeding Received Timer" DEFVAL { 10 } ::= { wfAtmSigEntry 28 } wfAtmSigT313 OBJECT-TYPE SYNTAX INTEGER(1..24) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Connect Sent Timer" DEFVAL { 4 } ::= { wfAtmSigEntry 29 } wfAtmSigT316 OBJECT-TYPE SYNTAX INTEGER(1..720) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Restart Request Sent on Interface Timer" DEFVAL { 120 } ::= { wfAtmSigEntry 30 } wfAtmSigT316c OBJECT-TYPE SYNTAX INTEGER(1..720) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Restart Request Sent on Channel Timer" DEFVAL { 120 } ::= { wfAtmSigEntry 31 } wfAtmSigT322 OBJECT-TYPE SYNTAX INTEGER(1..24) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Status Enquiry Sent Timer" DEFVAL { 4 } ::= { wfAtmSigEntry 32 } wfAtmSigTDisc OBJECT-TYPE SYNTAX INTEGER(1..180) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B SAAL Data Link Disconnect Timer" DEFVAL { 4 } ::= { wfAtmSigEntry 33 } wfAtmSigT398 OBJECT-TYPE SYNTAX INTEGER(1..24) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Drop Party Sent Timer - Multipoint Connections only" DEFVAL { 4 } ::= { wfAtmSigEntry 34 } wfAtmSigT399 OBJECT-TYPE SYNTAX INTEGER(1..84) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Add Party Sent Timer - Multipoint Connections only" DEFVAL { 14 } ::= { wfAtmSigEntry 35 } wfAtmSigNumRst OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Number of restarts to be retransmitted before link considered down" DEFVAL { 3 } ::= { wfAtmSigEntry 36 } wfAtmSigNumStat OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Number of status enquiries to be retransmitted before link considered down" DEFVAL { 3 } ::= { wfAtmSigEntry 37 } wfAtmSigRestart OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B send restart when the link comes up. (sub)" DEFVAL { on } ::= { wfAtmSigEntry 38 } wfAtmSigDebug OBJECT-TYPE SYNTAX INTEGER { disabled(1), status(2), detail(4), all(2147483647) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging 2 - Signalling Status events 4294967295 - All of the above" DEFVAL { status } ::= { wfAtmSigEntry 39 } wfAtmSigCallsSec OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-write STATUS mandatory DESCRIPTION "The number of signaling messages per second allowed to flow out of the interface (call pacing). Zero turns this feature off." DEFVAL { 0 } ::= { wfAtmSigEntry 40 } wfAtmSigT301 OBJECT-TYPE SYNTAX INTEGER(180..1024) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Alert Received Timer" DEFVAL { 180 } ::= { wfAtmSigEntry 41 } wfAtmSigT304 OBJECT-TYPE SYNTAX INTEGER(30..120) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Setup Ack Received Timer" DEFVAL { 30 } ::= { wfAtmSigEntry 42 } wfAtmSigT397 OBJECT-TYPE SYNTAX INTEGER(180..1024) ACCESS read-write STATUS mandatory DESCRIPTION "Q.93B Alerting or Add Party Alterting Received Timer" DEFVAL { 180 } ::= { wfAtmSigEntry 43 } wfAtmSscopTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmSscopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table includes the ATM SSCOP MIB record for Q.SAAL" ::= { wfAtmCommonGroup 8 } wfAtmSscopEntry OBJECT-TYPE SYNTAX WfAtmSscopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry contains attributes needed for ATM Q.SAAL" INDEX { wfAtmSscopLineNumber } ::= { wfAtmSscopTable 1 } WfAtmSscopEntry ::= SEQUENCE { wfAtmSscopDelete INTEGER, wfAtmSscopDisable INTEGER, wfAtmSscopLineNumber INTEGER, wfAtmSscopAtmCct INTEGER, wfAtmSscopState INTEGER, wfAtmSscopLowThreshold INTEGER, wfAtmSscopUpThreshold INTEGER, wfAtmSscopArbitration INTEGER, wfAtmSscopPollTimer INTEGER, wfAtmSscopKeepAliveTimer INTEGER, wfAtmSscopNoResponseTimer INTEGER, wfAtmSscopConnectControlTimer INTEGER, wfAtmSscopMaxCc INTEGER, wfAtmSscopMaxPd INTEGER, wfAtmSscopMaxStat INTEGER, wfAtmSscopIdleTimer INTEGER, wfAtmSscopStandard INTEGER, wfAtmSscopDebug INTEGER } wfAtmSscopDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created." DEFVAL { created } ::= { wfAtmSscopEntry 1 } wfAtmSscopDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter" DEFVAL { enabled } ::= { wfAtmSscopEntry 2 } wfAtmSscopLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value is the line number of the router." ::= { wfAtmSscopEntry 3 } wfAtmSscopAtmCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit number of ATM driver associated with this Q.SAAL instance" ::= { wfAtmSscopEntry 4 } wfAtmSscopState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the Q.SAAL entity" DEFVAL { notpresent } ::= { wfAtmSscopEntry 5 } wfAtmSscopLowThreshold OBJECT-TYPE SYNTAX INTEGER(1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Congestion is reached when % of buffer pool goes below this threshold (sub)" DEFVAL { 2 } ::= { wfAtmSscopEntry 6 } wfAtmSscopUpThreshold OBJECT-TYPE SYNTAX INTEGER(1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Congestion is stopped when % of buffer pool goes above this threshold (sub)" DEFVAL { 2 } ::= { wfAtmSscopEntry 7 } wfAtmSscopArbitration OBJECT-TYPE SYNTAX INTEGER { passive(1), active(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines if Q.SAAL initiates link connection or waits for connect (sub)" DEFVAL { active } ::= { wfAtmSscopEntry 8 } wfAtmSscopPollTimer OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP Poll Timer. The Maximum time between transmission of a POLL PDU in tenths/sec" DEFVAL { 7 } ::= { wfAtmSscopEntry 9 } wfAtmSscopKeepAliveTimer OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP Keep Alive Timer. If no pending SD or SDP PDU's transmit a POLL PDU in tenths/sec" DEFVAL { 20 } ::= { wfAtmSscopEntry 10 } wfAtmSscopNoResponseTimer OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP No Response Timer. Max time between receipt of a STAT PDU in tenths/sec" DEFVAL { 70 } ::= { wfAtmSscopEntry 11 } wfAtmSscopConnectControlTimer OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP CC Timer. Time between xmt of BGN, END as long as ACK not received in tenths/sec" DEFVAL { 10 } ::= { wfAtmSscopEntry 12 } wfAtmSscopMaxCc OBJECT-TYPE SYNTAX INTEGER(1..20) ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP MaxCC. Maximum number of transmissions of a BGN, END or RS PDU." DEFVAL { 4 } ::= { wfAtmSscopEntry 13 } wfAtmSscopMaxPd OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP MaxPD. Maximum value of VT(PD) before transmitting POLL PDU." DEFVAL { 25 } ::= { wfAtmSscopEntry 14 } wfAtmSscopMaxStat OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP MaxSTAT. Maximum number of list elements permissible in a STAT PDU" DEFVAL { 67 } ::= { wfAtmSscopEntry 15 } wfAtmSscopIdleTimer OBJECT-TYPE SYNTAX INTEGER(1..400) ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP Idle Timer. Timer used to determine when to enter the transient connection phase. Units in tenths/second." DEFVAL { 150 } ::= { wfAtmSscopEntry 16 } wfAtmSscopStandard OBJECT-TYPE SYNTAX INTEGER { v30(1), v31(2), v40(3) } ACCESS read-write STATUS mandatory DESCRIPTION "SSCOP version switch. UNI_V30, UNI_V31 and UNI_V40 for now. Probably no more than this." DEFVAL { v30 } ::= { wfAtmSscopEntry 17 } wfAtmSscopDebug OBJECT-TYPE SYNTAX INTEGER { disabled(1), status(2), detail(4), all(2147483647) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging 2 - SSCOP Status events 4294967295 - All of the above" DEFVAL { status } ::= { wfAtmSscopEntry 18 } wfAtmIlmiTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmIlmiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table includes the ATM ILMI MIB record for UME/ILMI" ::= { wfAtmCommonGroup 9 } wfAtmIlmiEntry OBJECT-TYPE SYNTAX WfAtmIlmiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry contains attributes needed for ATM UME/ILMI" INDEX { wfAtmIlmiLineNumber } ::= { wfAtmIlmiTable 1 } WfAtmIlmiEntry ::= SEQUENCE { wfAtmIlmiDelete INTEGER, wfAtmIlmiDisable INTEGER, wfAtmIlmiLineNumber INTEGER, wfAtmIlmiAtmCct INTEGER, wfAtmIlmiState INTEGER, wfAtmIlmiLowThreshold INTEGER, wfAtmIlmiUpThreshold INTEGER, wfAtmIlmiVpi INTEGER, wfAtmIlmiVci INTEGER, wfAtmIlmiInterfaceType INTEGER, wfAtmIlmiLocalPort INTEGER, wfAtmIlmiRemotePort INTEGER, wfAtmIlmiGetTimer INTEGER, wfAtmIlmiGetRetryCnt INTEGER, wfAtmIlmiGetNextTimer INTEGER, wfAtmIlmiGetNextRetryCnt INTEGER, wfAtmIlmiSetTimer INTEGER, wfAtmIlmiSetRetryCnt INTEGER, wfAtmIlmiLocalOid OBJECT IDENTIFIER, wfAtmIlmiDebug INTEGER, wfAtmIlmiNetPrefixTimer INTEGER } wfAtmIlmiDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created." DEFVAL { created } ::= { wfAtmIlmiEntry 1 } wfAtmIlmiDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter" DEFVAL { enabled } ::= { wfAtmIlmiEntry 2 } wfAtmIlmiLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance identifier. This value is the line number of the router." ::= { wfAtmIlmiEntry 3 } wfAtmIlmiAtmCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit number of ATM driver associated with this UME/ILMI instance" ::= { wfAtmIlmiEntry 4 } wfAtmIlmiState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of the UME/ILMI entity" DEFVAL { notpresent } ::= { wfAtmIlmiEntry 5 } wfAtmIlmiLowThreshold OBJECT-TYPE SYNTAX INTEGER(1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Congestion is reached when % of buffer pool goes below this threshold (sub)" DEFVAL { 2 } ::= { wfAtmIlmiEntry 6 } wfAtmIlmiUpThreshold OBJECT-TYPE SYNTAX INTEGER(1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Congestion is stopped when % of buffer pool goes above this threshold (sub)" DEFVAL { 2 } ::= { wfAtmIlmiEntry 7 } wfAtmIlmiVpi OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Virtual Path Identifier for the UME/ILMI VC" ::= { wfAtmIlmiEntry 8 } wfAtmIlmiVci OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Virtual Channel Identifier for the UME/ILMI VC" DEFVAL { 16 } ::= { wfAtmIlmiEntry 9 } wfAtmIlmiInterfaceType OBJECT-TYPE SYNTAX INTEGER { user(1), network(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Network Interface type, either USER or NETWORK side of the UME/ILMI" DEFVAL { user } ::= { wfAtmIlmiEntry 10 } wfAtmIlmiLocalPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "AAL UME/ILMI local port identifier" ::= { wfAtmIlmiEntry 11 } wfAtmIlmiRemotePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "AAL UME/ILMI remote port identifier" ::= { wfAtmIlmiEntry 12 } wfAtmIlmiGetTimer OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "UME/ILMI Get request timer" DEFVAL { 3 } ::= { wfAtmIlmiEntry 13 } wfAtmIlmiGetRetryCnt OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Max number of retransmissions of the UME/ILMI GET request before link down" DEFVAL { 3 } ::= { wfAtmIlmiEntry 14 } wfAtmIlmiGetNextTimer OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "UME/ILMI GetNext request timer" DEFVAL { 3 } ::= { wfAtmIlmiEntry 15 } wfAtmIlmiGetNextRetryCnt OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Max number of retransmits of the UME/ILMI GETNEXT request before link down" DEFVAL { 3 } ::= { wfAtmIlmiEntry 16 } wfAtmIlmiSetTimer OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "UME/ILMI Set request timer" DEFVAL { 3 } ::= { wfAtmIlmiEntry 17 } wfAtmIlmiSetRetryCnt OBJECT-TYPE SYNTAX INTEGER(1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Max number of retransmissions of the UME/ILMI SET request before link down" DEFVAL { 3 } ::= { wfAtmIlmiEntry 18 } wfAtmIlmiLocalOid OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the OID of the first object in the standard DS1 or DS3 MIB corresponding to this ATM UNI port" ::= { wfAtmIlmiEntry 19 } wfAtmIlmiDebug OBJECT-TYPE SYNTAX INTEGER { disabled(1), status(2), detail(4), all(2147483647) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging 2 - ILMI Status events 4294967295 - All of the above" DEFVAL { status } ::= { wfAtmIlmiEntry 20 } wfAtmIlmiNetPrefixTimer OBJECT-TYPE SYNTAX INTEGER(1..120) ACCESS read-write STATUS mandatory DESCRIPTION "Time to wait for a Net prefix before restarting UME" DEFVAL { 8 } ::= { wfAtmIlmiEntry 21 } wfAtmNetPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmNetPrefixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table includes the ATM Network Address Prefix record" ::= { wfAtmCommonGroup 10 } wfAtmNetPrefixEntry OBJECT-TYPE SYNTAX WfAtmNetPrefixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry contains attributes needed for a ATM Network Address Prefix" INDEX { wfAtmNetPrefixPort, wfAtmNetPrefixPrefix } ::= { wfAtmNetPrefixTable 1 } WfAtmNetPrefixEntry ::= SEQUENCE { wfAtmNetPrefixPort INTEGER, wfAtmNetPrefixPrefix OCTET STRING, wfAtmNetPrefixStatus INTEGER } wfAtmNetPrefixPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Port which uniquely identifies the UNI (ie. InterfaceIndex or line number)" ::= { wfAtmNetPrefixEntry 1 } wfAtmNetPrefixPrefix OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Network Prefix used on this UNI" ::= { wfAtmNetPrefixEntry 2 } wfAtmNetPrefixStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of Network Prefix (being used or not being used)" DEFVAL { valid } ::= { wfAtmNetPrefixEntry 3 } wfAtmTableDebugTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmTableDebugEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is used to display the contents of internal ATM tables in the event log, for debug purposes." ::= { wfAtmCommonGroup 11 } wfAtmTableDebugEntry OBJECT-TYPE SYNTAX WfAtmTableDebugEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry contains attributes needed for debugging internal ATM tables." INDEX { wfAtmTableDebugSlot } ::= { wfAtmTableDebugTable 1 } WfAtmTableDebugEntry ::= SEQUENCE { wfAtmTableDebugDelete INTEGER, wfAtmTableDebugSlot INTEGER, wfAtmTableDebugType INTEGER } wfAtmTableDebugDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete attribute." ::= { wfAtmTableDebugEntry 1 } wfAtmTableDebugSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Slot that we want to dump ATM tables from." ::= { wfAtmTableDebugEntry 2 } wfAtmTableDebugType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Slot that we want to dump ATM tables from." ::= { wfAtmTableDebugEntry 3 } wfAtmAlcDrvTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcDrvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains line record entries for each driver responsible for the management and control of an ATM/ALC interface." ::= { wfAtmLinkModuleGroup 1 } wfAtmAlcDrvEntry OBJECT-TYPE SYNTAX WfAtmAlcDrvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmAlcSlot, wfAtmAlcPort } ::= { wfAtmAlcDrvTable 1 } WfAtmAlcDrvEntry ::= SEQUENCE { wfAtmAlcDelete INTEGER, wfAtmAlcDisable INTEGER, wfAtmAlcState INTEGER, wfAtmAlcSlot INTEGER, wfAtmAlcPort INTEGER, wfAtmAlcCct INTEGER, wfAtmAlcLineNumber INTEGER, wfAtmAlcType INTEGER, wfAtmAlcMtu INTEGER, wfAtmAlcSpeed INTEGER, wfAtmAlcLastChange TimeTicks, wfAtmAlcInterfaceStatus INTEGER, wfAtmAlcInterfaceIndex INTEGER, wfAtmAlcDpNotify INTEGER, wfAtmAlcDpNotifyTimeout INTEGER, wfAtmAlcConfControlQSize INTEGER, wfAtmAlcConfIntqSize INTEGER, wfAtmAlcConfLogqSize INTEGER, wfAtmAlcConfNumXmtQueues INTEGER, wfAtmAlcUseDebugger INTEGER, wfAtmAlcConfXmtClipSlotMax INTEGER, wfAtmAlcXmtClipSlotMax INTEGER, wfAtmAlcConfXmtClipQueueMax INTEGER, wfAtmAlcXmtClipQueueMax INTEGER, wfAtmAlcConfXmtClipQueueMin INTEGER, wfAtmAlcXmtClipQueueMin INTEGER, wfAtmAlcXmtQueueBurst INTEGER, wfAtmAlcXmtPackets Counter, wfAtmAlcXmtPacketClips Counter, wfAtmAlcXmtOctets Counter, wfAtmAlcOutQLen Gauge, wfAtmAlcRcvPackets Counter, wfAtmAlcRcvReplenMisses Counter, wfAtmAlcConfRcvBuffersMax INTEGER, wfAtmAlcRcvBuffersMax INTEGER, wfAtmAlcMadrCt INTEGER, wfAtmAlcMadr OCTET STRING, wfAtmAlcVcInactEnable INTEGER, wfAtmAlcXmtBadVcs Counter } wfAtmAlcDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmAlcDrvEntry 1 } wfAtmAlcDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable driver parameter." DEFVAL { enabled } ::= { wfAtmAlcDrvEntry 2 } wfAtmAlcState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), download(4), config(5), notpresent(20) } ACCESS read-only STATUS mandatory DESCRIPTION "Driver state parameter. This parameter does not represent the state of the physical interface!" DEFVAL { notpresent } ::= { wfAtmAlcDrvEntry 3 } wfAtmAlcSlot OBJECT-TYPE SYNTAX INTEGER(1..14) ACCESS read-only STATUS mandatory DESCRIPTION "Slot number -- instance id." ::= { wfAtmAlcDrvEntry 4 } wfAtmAlcPort OBJECT-TYPE SYNTAX INTEGER { one(1), two(2), three(3), four(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Physical port number -- instance id." ::= { wfAtmAlcDrvEntry 5 } wfAtmAlcCct OBJECT-TYPE SYNTAX INTEGER(1..1023) ACCESS read-write STATUS mandatory DESCRIPTION "Circuit number for the driver." ::= { wfAtmAlcDrvEntry 6 } wfAtmAlcLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Index value used to uniquely identify an instance of a physical ATM port. This index is generally chosen by SiteManager and shall be used as an instance identifier for ATM MIB objects." ::= { wfAtmAlcDrvEntry 7 } wfAtmAlcType OBJECT-TYPE SYNTAX INTEGER { typesonet(1), typeds3(2), type100mb(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of interface. This attribute is an alias for 'ifType." ::= { wfAtmAlcDrvEntry 8 } wfAtmAlcMtu OBJECT-TYPE SYNTAX INTEGER { default(4608) } ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest packet which can be sent/received on the interface, specified in octets. This attribute is an alias for 'ifMtu'." ::= { wfAtmAlcDrvEntry 9 } wfAtmAlcSpeed OBJECT-TYPE SYNTAX INTEGER { speed155mb(155520000), speed100mb(100000000), speed45mb(44736000) } ACCESS read-only STATUS mandatory DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. This attribute is an alias for 'ifSpeed'." ::= { wfAtmAlcDrvEntry 10 } wfAtmAlcLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundreths of a second) since the network management portion of the system was last re-initialized. This attribute is an alias for 'ifLastChange' in the MIBII System Group." ::= { wfAtmAlcDrvEntry 11 } wfAtmAlcInterfaceStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5) } ACCESS read-only STATUS mandatory DESCRIPTION "MIB-II ifOperStatus" DEFVAL { unknown } ::= { wfAtmAlcDrvEntry 12 } wfAtmAlcInterfaceIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "MIB-II interface index" ::= { wfAtmAlcDrvEntry 13 } wfAtmAlcDpNotify OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Data Path (DP) notify function. This function, when enabled, will disable the DP interface when the physical interface becomes non-operational." DEFVAL { enabled } ::= { wfAtmAlcDrvEntry 14 } wfAtmAlcDpNotifyTimeout OBJECT-TYPE SYNTAX INTEGER(0..3600) ACCESS read-write STATUS mandatory DESCRIPTION "Data Path (DP) notify function timeout period. This value specifies the number of seconds to wait before implementing the DP notify function. A timer will get set to this value when the state of the physical interface transitions from operational to non-operational when the DP notify function is enabled." DEFVAL { 3 } ::= { wfAtmAlcDrvEntry 15 } wfAtmAlcConfControlQSize OBJECT-TYPE SYNTAX INTEGER { default(10) } ACCESS read-write STATUS mandatory DESCRIPTION "Number of command elements in each of the two Host Interface control qs" DEFVAL { default } ::= { wfAtmAlcDrvEntry 16 } wfAtmAlcConfIntqSize OBJECT-TYPE SYNTAX INTEGER { default(100) } ACCESS read-write STATUS mandatory DESCRIPTION "Number of elements in the Host Interface interrupt queue" DEFVAL { default } ::= { wfAtmAlcDrvEntry 17 } wfAtmAlcConfLogqSize OBJECT-TYPE SYNTAX INTEGER { default(25) } ACCESS read-write STATUS mandatory DESCRIPTION "Number of elements in the Host Interface log queue" DEFVAL { default } ::= { wfAtmAlcDrvEntry 18 } wfAtmAlcConfNumXmtQueues OBJECT-TYPE SYNTAX INTEGER(12..29) ACCESS read-write STATUS mandatory DESCRIPTION "Number of transmit queues in the Host Interface between the Host Driver and the CoP Driver" DEFVAL { 24 } ::= { wfAtmAlcDrvEntry 19 } wfAtmAlcUseDebugger OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls a debugger which may be built into the Coprocessor image. Shipped code does not include this debugger." DEFVAL { disabled } ::= { wfAtmAlcDrvEntry 20 } wfAtmAlcConfXmtClipSlotMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of frames the slot may queue up for transmit before the Host Driver begins to clip. Setting this attribute forces the driver to use the non zero value of the attribute rather than selecting a clip point automatically." ::= { wfAtmAlcDrvEntry 21 } wfAtmAlcXmtClipSlotMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of buffers per slot beyond which the driver will clip on transmit. Set by the driver. May be forced by setting wfAtmAlcConfXmtClipSlotMax != 0" ::= { wfAtmAlcDrvEntry 22 } wfAtmAlcConfXmtClipQueueMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of frames a transmit queue may queue up before the Host Driver begins to clip. Setting this attribute forces the driver to use the non zero value of the attribute rather than selecting a clip point automatically." ::= { wfAtmAlcDrvEntry 23 } wfAtmAlcXmtClipQueueMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of buffers per transmit queue beyond which the driver will clip on transmit. Set by the driver. May be forced by setting wfAtmAlcConfXmtClipQueueMax != 0" ::= { wfAtmAlcDrvEntry 24 } wfAtmAlcConfXmtClipQueueMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of frames a transmit queue will always be permitted to queue up regardless of the current value of wfAtmOutQLen relative to wfAtmXmtClipSlotMax. Setting this attribute forces the driver to use the nonzero value of the attribute rather than selecting a clip point automatically." ::= { wfAtmAlcDrvEntry 25 } wfAtmAlcXmtClipQueueMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of buffers each transmit queue is guaranteed to get before the driver clips due to the value of wfAtmXmtClipSlotMax. Set by the driver. May be forced by setting wfAtmAlcConfXmtClipQueueMin != 0" ::= { wfAtmAlcDrvEntry 26 } wfAtmAlcXmtQueueBurst OBJECT-TYPE SYNTAX INTEGER { default(40) } ACCESS read-write STATUS mandatory DESCRIPTION "Burst count for all transmit queues in CoP. Specifies the number of buffer(ettes) the CoP will process from a transmit queue in one service opportunity. A value of 0 (zero) will cause the CoP to burst forever (i.e., until either all data is transmitted from the queue or no more buffer(ette)s are available to transmit into." DEFVAL { default } ::= { wfAtmAlcDrvEntry 27 } wfAtmAlcXmtPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of Service Data Units (SDUs) transmitted without error." ::= { wfAtmAlcDrvEntry 28 } wfAtmAlcXmtPacketClips OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of packets dropped on transmit." ::= { wfAtmAlcDrvEntry 29 } wfAtmAlcXmtOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of octets transmitted without error over the link interface. These octets are associated with user data only and not overhead or padding octets." ::= { wfAtmAlcDrvEntry 30 } wfAtmAlcOutQLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is an alias for 'ifOutQLen' in the MIBII interface group." ::= { wfAtmAlcDrvEntry 31 } wfAtmAlcRcvPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of Service Data Units (SDUs) received without error." ::= { wfAtmAlcDrvEntry 32 } wfAtmAlcRcvReplenMisses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packet buffer misses while attempting to replenish driver receive ring." ::= { wfAtmAlcDrvEntry 33 } wfAtmAlcConfRcvBuffersMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of buffers the driver will try to maintain on its receive queue. Setting this attribute forces the driver to use the non zero value of the attribute rather than selecting a buffer count automatically." ::= { wfAtmAlcDrvEntry 34 } wfAtmAlcRcvBuffersMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of buffers which the driver will attempt to maintain on the receive queue. Set by the driver. May be forced by setting wfAtmAlcConfRcvBuffersMax != 0" ::= { wfAtmAlcDrvEntry 35 } wfAtmAlcMadrCt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of PROM-based MAC addresses." ::= { wfAtmAlcDrvEntry 36 } wfAtmAlcMadr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "First MAC address in canonical format (i.e., 00-00-a2...). The number of subsequent MAC addresses is specified by wfAtmAlcMadrCt which are sequential." ::= { wfAtmAlcDrvEntry 37 } wfAtmAlcVcInactEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Inactivity timeout function. When this function is enabled, all activated VCs will be polled, at an interval specified by wfAtmAlcCopVcInactTimeout, for inactivity." DEFVAL { enable } ::= { wfAtmAlcDrvEntry 38 } wfAtmAlcXmtBadVcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of packets dropped on transmit because of an invalid VPI/VCI." ::= { wfAtmAlcDrvEntry 39 } wfAtmAlcXmtqTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcXmtqEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Object created by the Host Driver, one for each transmit queue" ::= { wfAtmLinkModuleGroup 2 } wfAtmAlcXmtqEntry OBJECT-TYPE SYNTAX WfAtmAlcXmtqEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM Transmit Queue Table" INDEX { wfAtmAlcXmtqIndex, wfAtmAlcXmtqNumber } ::= { wfAtmAlcXmtqTable 1 } WfAtmAlcXmtqEntry ::= SEQUENCE { wfAtmAlcXmtqIndex INTEGER, wfAtmAlcXmtqNumber INTEGER, wfAtmAlcXmtqState INTEGER, wfAtmAlcXmtqStickyMask INTEGER, wfAtmAlcXmtqVcs INTEGER, wfAtmAlcXmtqOutQLen Gauge, wfAtmAlcXmtqOctets Counter, wfAtmAlcXmtqPackets Counter, wfAtmAlcXmtqPacketClips Counter } wfAtmAlcXmtqIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface (port) that contains the appropriate management information." ::= { wfAtmAlcXmtqEntry 1 } wfAtmAlcXmtqNumber OBJECT-TYPE SYNTAX INTEGER(3..28) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies a particular instance of a transmit queue." ::= { wfAtmAlcXmtqEntry 2 } wfAtmAlcXmtqState OBJECT-TYPE SYNTAX INTEGER { created(1), initdone(2), msgsent(3), notpresent(20) } ACCESS read-only STATUS mandatory DESCRIPTION "State of the transmit queue." DEFVAL { notpresent } ::= { wfAtmAlcXmtqEntry 3 } wfAtmAlcXmtqStickyMask OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcXmtqEntry 4 } wfAtmAlcXmtqVcs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Virtual Connections (VCs) configured for this queue." ::= { wfAtmAlcXmtqEntry 5 } wfAtmAlcXmtqOutQLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcXmtqEntry 6 } wfAtmAlcXmtqOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcXmtqEntry 7 } wfAtmAlcXmtqPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcXmtqEntry 8 } wfAtmAlcXmtqPacketClips OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcXmtqEntry 9 } wfAtmAlcCopConfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcCopConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains basic CONFIGURATION information for the ATM/ALC CoProcessor (CoP) environment." ::= { wfAtmLinkModuleGroup 3 } wfAtmAlcCopConfEntry OBJECT-TYPE SYNTAX WfAtmAlcCopConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmAlcCopConfIndex } ::= { wfAtmAlcCopConfTable 1 } WfAtmAlcCopConfEntry ::= SEQUENCE { wfAtmAlcCopConfDelete INTEGER, wfAtmAlcCopConfIndex INTEGER, wfAtmAlcCopBufSize INTEGER, wfAtmAlcCopConfXmtBufs INTEGER, wfAtmAlcCopConfRcvBufs INTEGER, wfAtmAlcCopDmaHighWatermark INTEGER, wfAtmAlcCopDmaLowWatermark INTEGER, wfAtmAlcCopCacheControl INTEGER, wfAtmAlcCopHwModId INTEGER, wfAtmAlcCopVcInactTimeout INTEGER } wfAtmAlcCopConfDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmAlcCopConfEntry 1 } wfAtmAlcCopConfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface that contains the appropriate management information." ::= { wfAtmAlcCopConfEntry 2 } wfAtmAlcCopBufSize OBJECT-TYPE SYNTAX INTEGER(128..1024) ACCESS read-write STATUS mandatory DESCRIPTION "Size in bytes of buffer(ettes)." DEFVAL { 532 } ::= { wfAtmAlcCopConfEntry 3 } wfAtmAlcCopConfXmtBufs OBJECT-TYPE SYNTAX INTEGER(10..90) ACCESS read-write STATUS mandatory DESCRIPTION "Percentage of transmit buffers to allocate in relation to the total packet memory size." DEFVAL { 55 } ::= { wfAtmAlcCopConfEntry 4 } wfAtmAlcCopConfRcvBufs OBJECT-TYPE SYNTAX INTEGER(10..90) ACCESS read-write STATUS mandatory DESCRIPTION "Percentage of receive buffers to allocate in relation to the total packet memory size." DEFVAL { 45 } ::= { wfAtmAlcCopConfEntry 5 } wfAtmAlcCopDmaHighWatermark OBJECT-TYPE SYNTAX INTEGER(1..512) ACCESS read-write STATUS mandatory DESCRIPTION "DMA FIFO high watermark. This value determines the mark upon which the DMA controller will generate an interrupt specifying FIFO 'almost full'." DEFVAL { 32 } ::= { wfAtmAlcCopConfEntry 6 } wfAtmAlcCopDmaLowWatermark OBJECT-TYPE SYNTAX INTEGER(1..512) ACCESS read-write STATUS mandatory DESCRIPTION "DMA FIFO low watermark. This value determines the mark upon which the DMA controller will generate an interrupt specifying FIFO 'almost empty'." DEFVAL { 128 } ::= { wfAtmAlcCopConfEntry 7 } wfAtmAlcCopCacheControl OBJECT-TYPE SYNTAX INTEGER { both(1), icache(2), dcache(3), none(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines the state of the cache control register in the CoP." DEFVAL { both } ::= { wfAtmAlcCopConfEntry 8 } wfAtmAlcCopHwModId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Link module hardware identifier. Includes physical interface type." ::= { wfAtmAlcCopConfEntry 9 } wfAtmAlcCopVcInactTimeout OBJECT-TYPE SYNTAX INTEGER(60..3600) ACCESS read-write STATUS mandatory DESCRIPTION "Inactivity timeout value for all VCs on this interface in seconds. If no cells have been transmitted or received on an VC over the given timeout period then the VC will be closed." DEFVAL { 1200 } ::= { wfAtmAlcCopConfEntry 10 } wfAtmAlcCopHwTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcCopHwEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains hardware information relating to the ATM/ALC link module." ::= { wfAtmLinkModuleGroup 4 } wfAtmAlcCopHwEntry OBJECT-TYPE SYNTAX WfAtmAlcCopHwEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmAlcCopHwIndex } ::= { wfAtmAlcCopHwTable 1 } WfAtmAlcCopHwEntry ::= SEQUENCE { wfAtmAlcCopHwIndex INTEGER, wfAtmAlcCopType INTEGER, wfAtmAlcCopPktMemSize INTEGER, wfAtmAlcCopCtlMemSize INTEGER, wfAtmAlcCopInsMemSize INTEGER, wfAtmAlcCopAlcClockSpeed INTEGER, wfAtmAlcCopAlcVersion INTEGER, wfAtmAlcCopNtcVersion INTEGER, wfAtmAlcCopAtcVersion INTEGER } wfAtmAlcCopHwIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface that contains the appropriate management information." ::= { wfAtmAlcCopHwEntry 1 } wfAtmAlcCopType OBJECT-TYPE SYNTAX INTEGER { m68040(1), m68060(2) } ACCESS read-only STATUS mandatory DESCRIPTION "CoProcessor type." ::= { wfAtmAlcCopHwEntry 2 } wfAtmAlcCopPktMemSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Size, in octets, of packet memory on the link module." ::= { wfAtmAlcCopHwEntry 3 } wfAtmAlcCopCtlMemSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Size, in octets, of control memory on the link module." ::= { wfAtmAlcCopHwEntry 4 } wfAtmAlcCopInsMemSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Size, in octets, of module memory on the link module." ::= { wfAtmAlcCopHwEntry 5 } wfAtmAlcCopAlcClockSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Clock speed of the Adaptation Layer Controller (ALC) device." ::= { wfAtmAlcCopHwEntry 6 } wfAtmAlcCopAlcVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Revision of the Adaptation Layer Controller (ALC) device." ::= { wfAtmAlcCopHwEntry 7 } wfAtmAlcCopNtcVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Revision of the Network Termination Controller (NTC) device." ::= { wfAtmAlcCopHwEntry 8 } wfAtmAlcCopAtcVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Revision of the Address Translation Controller (ATC) device." ::= { wfAtmAlcCopHwEntry 9 } wfAtmAlcCopInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcCopInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains general CoP information." ::= { wfAtmLinkModuleGroup 5 } wfAtmAlcCopInfoEntry OBJECT-TYPE SYNTAX WfAtmAlcCopInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmAlcCopInfoIndex } ::= { wfAtmAlcCopInfoTable 1 } WfAtmAlcCopInfoEntry ::= SEQUENCE { wfAtmAlcCopInfoIndex INTEGER, wfAtmAlcCopState INTEGER, wfAtmAlcCopConfigState INTEGER, wfAtmAlcCopTotalBufs INTEGER, wfAtmAlcCopTotalXmtBufs INTEGER, wfAtmAlcCopTotalRcvBufs INTEGER } wfAtmAlcCopInfoIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface that contains the appropriate management information." ::= { wfAtmAlcCopInfoEntry 1 } wfAtmAlcCopState OBJECT-TYPE SYNTAX INTEGER { operational(1), nonoperational(2), init(3), config(4) } ACCESS read-only STATUS mandatory DESCRIPTION "State of the CoP driver." ::= { wfAtmAlcCopInfoEntry 2 } wfAtmAlcCopConfigState OBJECT-TYPE SYNTAX INTEGER { dma(1), sar(2), sartraf(4), sarpcrq(8), sarscrq(16), frmgen(32), frmrcv(64), frmxmt(128), frmoam(256), frmstats(512), frmcsi(1024), frmdma(2048), done(4095) } ACCESS read-only STATUS mandatory DESCRIPTION "State of the configuration process. The CoP driver performs a series of configuration events for all the major components on the link module. This state show where in the configuration process the CoP driver resides. Until done, no data will be allowed to be transmitted or received." ::= { wfAtmAlcCopInfoEntry 3 } wfAtmAlcCopTotalBufs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of buffers available for use in packet memory." ::= { wfAtmAlcCopInfoEntry 4 } wfAtmAlcCopTotalXmtBufs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of buffers allocated for transmit." ::= { wfAtmAlcCopInfoEntry 5 } wfAtmAlcCopTotalRcvBufs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of buffers allocated for receive." ::= { wfAtmAlcCopInfoEntry 6 } wfAtmAlcCopDataPathTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcCopDataPathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains CoP data path statistics such as the number of packets, buffers, and cells transmitted and received." ::= { wfAtmLinkModuleGroup 6 } wfAtmAlcCopDataPathEntry OBJECT-TYPE SYNTAX WfAtmAlcCopDataPathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmAlcCopDataPathIndex } ::= { wfAtmAlcCopDataPathTable 1 } WfAtmAlcCopDataPathEntry ::= SEQUENCE { wfAtmAlcCopDataPathIndex INTEGER, wfAtmAlcCopXmtPackets Counter, wfAtmAlcCopXmtBuffers Counter, wfAtmAlcCopXmtErrBuffers Counter, wfAtmAlcCopXmtCells OCTET STRING, wfAtmAlcCopXmtUnassCells Counter, wfAtmAlcCopXmtIdleCells Counter, wfAtmAlcCopXmtUserCells Counter, wfAtmAlcCopXmtOctets Counter, wfAtmAlcCopRcvPackets Counter, wfAtmAlcCopRcvClipPackets Counter, wfAtmAlcCopRcvBuffers Counter, wfAtmAlcCopRcvErrBuffers Counter, wfAtmAlcCopRcvClipBuffers Counter, wfAtmAlcCopRcvSarDropBuffers Counter, wfAtmAlcCopRcvCells OCTET STRING, wfAtmAlcCopRcvDropCells Counter, wfAtmAlcCopRcvUnassCells Counter, wfAtmAlcCopRcvIdleCells Counter, wfAtmAlcCopRcvUserCells Counter, wfAtmAlcCopRcvSarDropCells Counter, wfAtmAlcCopRcvOctets Counter, wfAtmAlcCopXmtOamCells Counter, wfAtmAlcCopRcvOamCells Counter, wfAtmAlcCopRcvOamCrcErrs Counter } wfAtmAlcCopDataPathIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface that contains the appropriate management information." ::= { wfAtmAlcCopDataPathEntry 1 } wfAtmAlcCopXmtPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets transferred to the link module." ::= { wfAtmAlcCopDataPathEntry 2 } wfAtmAlcCopXmtBuffers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CoP buffers used for segmentation (transmit)." ::= { wfAtmAlcCopDataPathEntry 3 } wfAtmAlcCopXmtErrBuffers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CoP transmit buffers returned in error by SAR device." ::= { wfAtmAlcCopDataPathEntry 4 } wfAtmAlcCopXmtCells OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Total number of assigned ATM layer cells transmitted at the transceiver transmit interface (T-count). This attribute is a 64-bit counter." ::= { wfAtmAlcCopDataPathEntry 5 } wfAtmAlcCopXmtUnassCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopDataPathEntry 6 } wfAtmAlcCopXmtIdleCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopDataPathEntry 7 } wfAtmAlcCopXmtUserCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopDataPathEntry 8 } wfAtmAlcCopXmtOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of octets transmitted (segmented) successfully." ::= { wfAtmAlcCopDataPathEntry 9 } wfAtmAlcCopRcvPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets completely reassembled." ::= { wfAtmAlcCopDataPathEntry 10 } wfAtmAlcCopRcvClipPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped because no host buffers available to hold the incoming data." ::= { wfAtmAlcCopDataPathEntry 11 } wfAtmAlcCopRcvBuffers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CoP buffers used for reassembly." ::= { wfAtmAlcCopDataPathEntry 12 } wfAtmAlcCopRcvErrBuffers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CoP receive buffers returned in error by SAR device." ::= { wfAtmAlcCopDataPathEntry 13 } wfAtmAlcCopRcvClipBuffers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CoP buffers dropped because no receive buffer space were available to hold the incoming data." ::= { wfAtmAlcCopDataPathEntry 14 } wfAtmAlcCopRcvSarDropBuffers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CoP buffers dropped by the SAR device." ::= { wfAtmAlcCopDataPathEntry 15 } wfAtmAlcCopRcvCells OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Total number of assigned ATM layer cells received at the transciever receive interface that have not been discarded (R-count). This attribute is a 64-bit counter." ::= { wfAtmAlcCopDataPathEntry 16 } wfAtmAlcCopRcvDropCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of cells received at the transceiver receive interface that have been discarded (D-count). The cells may have been discarded due to the following reasons: physical layer cells ATM layer cell with uncorrectable HEC error ATM layer cell which has been discarded via the discard mask protocol error" ::= { wfAtmAlcCopDataPathEntry 17 } wfAtmAlcCopRcvUnassCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopDataPathEntry 18 } wfAtmAlcCopRcvIdleCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopDataPathEntry 19 } wfAtmAlcCopRcvUserCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopDataPathEntry 20 } wfAtmAlcCopRcvSarDropCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopDataPathEntry 21 } wfAtmAlcCopRcvOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of octets received (reassembled) successfully." ::= { wfAtmAlcCopDataPathEntry 22 } wfAtmAlcCopXmtOamCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of OAM cells transmitted successfully." ::= { wfAtmAlcCopDataPathEntry 23 } wfAtmAlcCopRcvOamCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of OAM cells received successfully." ::= { wfAtmAlcCopDataPathEntry 24 } wfAtmAlcCopRcvOamCrcErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of OAM cells received with CRC10 error." ::= { wfAtmAlcCopDataPathEntry 25 } wfAtmAlcCopErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcCopErrorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains CoP error statistics." ::= { wfAtmLinkModuleGroup 7 } wfAtmAlcCopErrorEntry OBJECT-TYPE SYNTAX WfAtmAlcCopErrorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmAlcCopErrorIndex } ::= { wfAtmAlcCopErrorTable 1 } WfAtmAlcCopErrorEntry ::= SEQUENCE { wfAtmAlcCopErrorIndex INTEGER, wfAtmAlcCopHecDetects Counter, wfAtmAlcCopHecCorrects Counter, wfAtmAlcCopB2Febes Counter, wfAtmAlcCopB3Febes Counter, wfAtmAlcCopF1Febes Counter, wfAtmAlcCopF3Febes Counter, wfAtmAlcCopG1Febes Counter, wfAtmAlcCopDropIntqEvents Counter, wfAtmAlcCopDropLogqEvents Counter, wfAtmAlcCopDmaFifoOverruns Counter, wfAtmAlcCopDmaFifoUnderruns Counter, wfAtmAlcCopLossSignals Counter, wfAtmAlcCopLossFrames Counter, wfAtmAlcCopLossPointers Counter, wfAtmAlcCopOutCellDelins Counter, wfAtmAlcCopInCellDelins Counter, wfAtmAlcCopBufOverflows Counter, wfAtmAlcCopXmtQueueFulls Counter, wfAtmAlcCopXmtAtes Counter, wfAtmAlcCopRcvQueueEmptys Counter, wfAtmAlcCopRcvWriteFails Counter, wfAtmAlcCopRcvQueueFulls Counter, wfAtmAlcCopRcvAtes Counter } wfAtmAlcCopErrorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface that contains the appropriate management information." ::= { wfAtmAlcCopErrorEntry 1 } wfAtmAlcCopHecDetects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 2 } wfAtmAlcCopHecCorrects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 3 } wfAtmAlcCopB2Febes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 4 } wfAtmAlcCopB3Febes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 5 } wfAtmAlcCopF1Febes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 6 } wfAtmAlcCopF3Febes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 7 } wfAtmAlcCopG1Febes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 8 } wfAtmAlcCopDropIntqEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 9 } wfAtmAlcCopDropLogqEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 10 } wfAtmAlcCopDmaFifoOverruns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 11 } wfAtmAlcCopDmaFifoUnderruns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 12 } wfAtmAlcCopLossSignals OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of occurences of when the framer device detected loss of signal (i.e., no signal detect/no light)." ::= { wfAtmAlcCopErrorEntry 13 } wfAtmAlcCopLossFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 14 } wfAtmAlcCopLossPointers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 15 } wfAtmAlcCopOutCellDelins OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of occurences of when the framer device went out of cell delineation." ::= { wfAtmAlcCopErrorEntry 16 } wfAtmAlcCopInCellDelins OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of occurences of when the framer device went into cell delineation." ::= { wfAtmAlcCopErrorEntry 17 } wfAtmAlcCopBufOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 18 } wfAtmAlcCopXmtQueueFulls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 19 } wfAtmAlcCopXmtAtes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 20 } wfAtmAlcCopRcvQueueEmptys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 21 } wfAtmAlcCopRcvWriteFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 22 } wfAtmAlcCopRcvQueueFulls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 23 } wfAtmAlcCopRcvAtes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { wfAtmAlcCopErrorEntry 24 } wfAtmAlcSarConfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcSarConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains configuration information for the ATM/ALC SAR device." ::= { wfAtmLinkModuleGroup 8 } wfAtmAlcSarConfEntry OBJECT-TYPE SYNTAX WfAtmAlcSarConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmAlcSarConfIndex } ::= { wfAtmAlcSarConfTable 1 } WfAtmAlcSarConfEntry ::= SEQUENCE { wfAtmAlcSarConfDelete INTEGER, wfAtmAlcSarConfIndex INTEGER, wfAtmAlcSarDmaBurstLength INTEGER, wfAtmAlcSarDmaModeBw INTEGER, wfAtmAlcSarDmaModeBmode INTEGER, wfAtmAlcSarDmaModeOrder INTEGER, wfAtmAlcSarDmaModeMmode INTEGER, wfAtmAlcSarDmaModeCmode INTEGER, wfAtmAlcSarDmaModeSync INTEGER, wfAtmAlcSarControlRif INTEGER, wfAtmAlcSarControlLoop INTEGER, wfAtmAlcSarModeRtmr INTEGER, wfAtmAlcSarModeRid INTEGER, wfAtmAlcSarModeAal INTEGER, wfAtmAlcSarModeDmask INTEGER, wfAtmAlcSarModeDchain INTEGER, wfAtmAlcSarModeSmode INTEGER, wfAtmAlcSarModeBchain INTEGER, wfAtmAlcSarModeHec INTEGER, wfAtmAlcSarModeVpf INTEGER, wfAtmAlcSarModeBas INTEGER, wfAtmAlcSarModeAm INTEGER, wfAtmAlcSarModeTrtl INTEGER, wfAtmAlcSarTimeoutCtrPeriod INTEGER, wfAtmAlcSarTimeoutCtrInt INTEGER, wfAtmAlcSarMaxReceivePktLen INTEGER } wfAtmAlcSarConfDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmAlcSarConfEntry 1 } wfAtmAlcSarConfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface that contains the appropriate management information." ::= { wfAtmAlcSarConfEntry 2 } wfAtmAlcSarDmaBurstLength OBJECT-TYPE SYNTAX INTEGER(1..256) ACCESS read-write STATUS mandatory DESCRIPTION "Limits the max number of SAR DMA access cycles in a single block." DEFVAL { 1 } ::= { wfAtmAlcSarConfEntry 3 } wfAtmAlcSarDmaModeBw OBJECT-TYPE SYNTAX INTEGER { bit32(1), bit64(2) } ACCESS read-write STATUS mandatory DESCRIPTION "SAR memory interface width." DEFVAL { bit32 } ::= { wfAtmAlcSarConfEntry 4 } wfAtmAlcSarDmaModeBmode OBJECT-TYPE SYNTAX INTEGER { intel(1), motorola(2) } ACCESS read-write STATUS mandatory DESCRIPTION "SAR memory control signal mode." DEFVAL { intel } ::= { wfAtmAlcSarConfEntry 5 } wfAtmAlcSarDmaModeOrder OBJECT-TYPE SYNTAX INTEGER { bigendian(1), littleendian(2) } ACCESS read-write STATUS mandatory DESCRIPTION "SAR memory byte ordering convention." DEFVAL { bigendian } ::= { wfAtmAlcSarConfEntry 6 } wfAtmAlcSarDmaModeMmode OBJECT-TYPE SYNTAX INTEGER { system(1), ram(2) } ACCESS read-write STATUS mandatory DESCRIPTION "SAR memory mode." DEFVAL { ram } ::= { wfAtmAlcSarConfEntry 7 } wfAtmAlcSarDmaModeCmode OBJECT-TYPE SYNTAX INTEGER { standard(1), fast(2) } ACCESS read-write STATUS mandatory DESCRIPTION "SAR memory cycle time." DEFVAL { fast } ::= { wfAtmAlcSarConfEntry 8 } wfAtmAlcSarDmaModeSync OBJECT-TYPE SYNTAX INTEGER { async(1), sync(2) } ACCESS read-write STATUS mandatory DESCRIPTION "READY/DTACK signal treatment." DEFVAL { async } ::= { wfAtmAlcSarConfEntry 9 } wfAtmAlcSarControlRif OBJECT-TYPE SYNTAX INTEGER { one(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive buffer ready interrupt frequency." DEFVAL { one } ::= { wfAtmAlcSarConfEntry 10 } wfAtmAlcSarControlLoop OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Loop transmit cell stream into receive cell stream interface." DEFVAL { disabled } ::= { wfAtmAlcSarConfEntry 11 } wfAtmAlcSarModeRtmr OBJECT-TYPE SYNTAX INTEGER { notag(1), oneoctettag(2), twooctettag(3), threeoctettag(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive routing tag length." DEFVAL { notag } ::= { wfAtmAlcSarConfEntry 12 } wfAtmAlcSarModeRid OBJECT-TYPE SYNTAX INTEGER { vci(1), mid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Reassembly ID select." DEFVAL { vci } ::= { wfAtmAlcSarConfEntry 13 } wfAtmAlcSarModeAal OBJECT-TYPE SYNTAX INTEGER { set(1), clear(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Default receive status/descriptor type field setting." DEFVAL { clear } ::= { wfAtmAlcSarConfEntry 14 } wfAtmAlcSarModeDmask OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Disable transmit queue masking." DEFVAL { enabled } ::= { wfAtmAlcSarConfEntry 15 } wfAtmAlcSarModeDchain OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit cell stream daisy chain enable." DEFVAL { disabled } ::= { wfAtmAlcSarConfEntry 16 } wfAtmAlcSarModeSmode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive streaming mode enable." DEFVAL { enabled } ::= { wfAtmAlcSarConfEntry 17 } wfAtmAlcSarModeBchain OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive buffer chaining mode enable." DEFVAL { disabled } ::= { wfAtmAlcSarConfEntry 18 } wfAtmAlcSarModeHec OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Header error check operation." DEFVAL { enabled } ::= { wfAtmAlcSarConfEntry 19 } wfAtmAlcSarModeVpf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Virtual path filter enable." DEFVAL { disabled } ::= { wfAtmAlcSarConfEntry 20 } wfAtmAlcSarModeBas OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Buffer ageing support." DEFVAL { disabled } ::= { wfAtmAlcSarConfEntry 21 } wfAtmAlcSarModeAm OBJECT-TYPE SYNTAX INTEGER { trickle(1), burst(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Traffic rate averaging method." DEFVAL { trickle } ::= { wfAtmAlcSarConfEntry 22 } wfAtmAlcSarModeTrtl OBJECT-TYPE SYNTAX INTEGER { notag(1), oneoctettag(2), twooctettag(3), threeoctettag(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit routing tag length." DEFVAL { notag } ::= { wfAtmAlcSarConfEntry 23 } wfAtmAlcSarTimeoutCtrPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of DCCK clock periods required to increment the receive buffer ageing time base counter." ::= { wfAtmAlcSarConfEntry 24 } wfAtmAlcSarTimeoutCtrInt OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum time period allowed between the arrival of an incoming packet and the host servicing the receive buffer." ::= { wfAtmAlcSarConfEntry 25 } wfAtmAlcSarMaxReceivePktLen OBJECT-TYPE SYNTAX INTEGER { default(4608) } ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of bytes of incoming packet data that can be received." DEFVAL { default } ::= { wfAtmAlcSarConfEntry 26 } wfAtmAlcSarTrafficMgtTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcSarTrafficMgtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information relating to the traffic management controller in the ATM/ALC SAR device." ::= { wfAtmLinkModuleGroup 9 } wfAtmAlcSarTrafficMgtEntry OBJECT-TYPE SYNTAX WfAtmAlcSarTrafficMgtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmAlcSarTrafficMgtIndex } ::= { wfAtmAlcSarTrafficMgtTable 1 } WfAtmAlcSarTrafficMgtEntry ::= SEQUENCE { wfAtmAlcSarTrafficMgtDelete INTEGER, wfAtmAlcSarTrafficMgtIndex INTEGER, wfAtmAlcSarPeakCellRateEna INTEGER, wfAtmAlcSarAvgCellRateEna INTEGER, wfAtmAlcSarPeakCellRate INTEGER, wfAtmAlcSarAvgCellRate INTEGER, wfAtmAlcSarMaxBurstSize INTEGER } wfAtmAlcSarTrafficMgtDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmAlcSarTrafficMgtEntry 1 } wfAtmAlcSarTrafficMgtIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface that contains the appropriate management information." ::= { wfAtmAlcSarTrafficMgtEntry 2 } wfAtmAlcSarPeakCellRateEna OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable counter for SAR peak transmission rate." DEFVAL { enabled } ::= { wfAtmAlcSarTrafficMgtEntry 3 } wfAtmAlcSarAvgCellRateEna OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable counter for SAR average trasnmission rate." DEFVAL { enabled } ::= { wfAtmAlcSarTrafficMgtEntry 4 } wfAtmAlcSarPeakCellRate OBJECT-TYPE SYNTAX INTEGER { default(365566) } ACCESS read-write STATUS mandatory DESCRIPTION "Desired value for SAR total peak cell rate (cells/second)." DEFVAL { default } ::= { wfAtmAlcSarTrafficMgtEntry 5 } wfAtmAlcSarAvgCellRate OBJECT-TYPE SYNTAX INTEGER { default(365566) } ACCESS read-write STATUS mandatory DESCRIPTION "Desired value for SAR total average cell rate (cells/second)." DEFVAL { default } ::= { wfAtmAlcSarTrafficMgtEntry 6 } wfAtmAlcSarMaxBurstSize OBJECT-TYPE SYNTAX INTEGER { default(40) } ACCESS read-write STATUS mandatory DESCRIPTION "Desired value for SAR maximum burst size (cells)." DEFVAL { default } ::= { wfAtmAlcSarTrafficMgtEntry 7 } wfAtmAlcSarRateQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcSarRateQueueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information relating to the peak rate queues provided by the ATM/ALC SAR device." ::= { wfAtmLinkModuleGroup 10 } wfAtmAlcSarRateQueueEntry OBJECT-TYPE SYNTAX WfAtmAlcSarRateQueueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmAlcSarRateQueueIndex, wfAtmAlcSarRateQueueNumber } ::= { wfAtmAlcSarRateQueueTable 1 } WfAtmAlcSarRateQueueEntry ::= SEQUENCE { wfAtmAlcSarRateQueueIndex INTEGER, wfAtmAlcSarRateQueueNumber INTEGER, wfAtmAlcSarRateQueueState INTEGER, wfAtmAlcSarRateQueuePcr INTEGER, wfAtmAlcSarRateQueueVcs INTEGER, wfAtmAlcSarRateQueueDef INTEGER } wfAtmAlcSarRateQueueIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface that contains the appropriate management information." ::= { wfAtmAlcSarRateQueueEntry 1 } wfAtmAlcSarRateQueueNumber OBJECT-TYPE SYNTAX INTEGER(1..12) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies a particular instance of a rate queue." ::= { wfAtmAlcSarRateQueueEntry 2 } wfAtmAlcSarRateQueueState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Rate queue state parameter: enabled or disabled." ::= { wfAtmAlcSarRateQueueEntry 3 } wfAtmAlcSarRateQueuePcr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Peak Cell Rate (PCR) of rate queue defined in bits per second." ::= { wfAtmAlcSarRateQueueEntry 4 } wfAtmAlcSarRateQueueVcs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Virtual Connections (VCs) configured for this queue." ::= { wfAtmAlcSarRateQueueEntry 5 } wfAtmAlcSarRateQueueDef OBJECT-TYPE SYNTAX INTEGER { implicit(1), explicit(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the method by which this queue was defined: IMPLICIT means that the driver defined the queue when a VC was added; EXPLICIT means that the queue was explicitly defined by an entity other than the driver." ::= { wfAtmAlcSarRateQueueEntry 6 } wfAtmAlcFrmConfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmAlcFrmConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains configuration information for the ATM/ALC FRAMER device." ::= { wfAtmLinkModuleGroup 11 } wfAtmAlcFrmConfEntry OBJECT-TYPE SYNTAX WfAtmAlcFrmConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmAlcFrmConfIndex } ::= { wfAtmAlcFrmConfTable 1 } WfAtmAlcFrmConfEntry ::= SEQUENCE { wfAtmAlcFrmConfDelete INTEGER, wfAtmAlcFrmConfIndex INTEGER, wfAtmAlcFrmGenEnable INTEGER, wfAtmAlcFrmGenFramingMode INTEGER, wfAtmAlcFrmGenScramblerEna INTEGER, wfAtmAlcFrmGenDescrambleEna INTEGER, wfAtmAlcFrmGenLoopback INTEGER, wfAtmAlcFrmGenSyncFoundCnt INTEGER, wfAtmAlcFrmGenSyncLostCnt INTEGER, wfAtmAlcFrmRcvCellEnable INTEGER, wfAtmAlcFrmRcvOamCrcCheck INTEGER, wfAtmAlcFrmRcvOamCrcGen INTEGER, wfAtmAlcFrmRcvCellInsPrio INTEGER, wfAtmAlcFrmRcvInsertPcr INTEGER, wfAtmAlcFrmRcvGfcIgnore INTEGER, wfAtmAlcFrmRcvDescrambleCtl INTEGER, wfAtmAlcFrmRcvHecRcvMask INTEGER, wfAtmAlcFrmRcvErrCorrectEna INTEGER, wfAtmAlcFrmRcvByteAlignment INTEGER, wfAtmAlcFrmRcvCellSyncFound INTEGER, wfAtmAlcFrmRcvCellSyncLost INTEGER, wfAtmAlcFrmRcvExtUserCell INTEGER, wfAtmAlcFrmRcvExtMetaSig INTEGER, wfAtmAlcFrmRcvExtBcastSig INTEGER, wfAtmAlcFrmRcvExtPointSig INTEGER, wfAtmAlcFrmRcvExtIlmiSig INTEGER, wfAtmAlcFrmRcvExtF4F5PrfMan INTEGER, wfAtmAlcFrmRcvExtF1F3PlOam INTEGER, wfAtmAlcFrmRcvExtF4Segment INTEGER, wfAtmAlcFrmRcvExtF4EndEnd INTEGER, wfAtmAlcFrmRcvExtF5Segment INTEGER, wfAtmAlcFrmRcvExtF5EndEnd INTEGER, wfAtmAlcFrmRcvDisUserCell INTEGER, wfAtmAlcFrmRcvDisMetaSig INTEGER, wfAtmAlcFrmRcvDisBcastSig INTEGER, wfAtmAlcFrmRcvDisPointSig INTEGER, wfAtmAlcFrmRcvDisIlmiSig INTEGER, wfAtmAlcFrmRcvDisUnassCell INTEGER, wfAtmAlcFrmRcvDisF4Segment INTEGER, wfAtmAlcFrmRcvDisF4EndEnd INTEGER, wfAtmAlcFrmRcvDisF5Segment INTEGER, wfAtmAlcFrmRcvDisF5EndEnd INTEGER, wfAtmAlcFrmXmtCellEnable INTEGER, wfAtmAlcFrmXmtOamCrcCheck INTEGER, wfAtmAlcFrmXmtOamCrcGen INTEGER, wfAtmAlcFrmXmtCellInsPrio INTEGER, wfAtmAlcFrmXmtInsertPcr INTEGER, wfAtmAlcFrmXmtGfcIgnore INTEGER, wfAtmAlcFrmXmtCellDecouple INTEGER, wfAtmAlcFrmXmtScrambleCtl INTEGER, wfAtmAlcFrmXmtHecXmtMask INTEGER, wfAtmAlcFrmXmtExtUserCell INTEGER, wfAtmAlcFrmXmtExtMetaSig INTEGER, wfAtmAlcFrmXmtExtBcastSig INTEGER, wfAtmAlcFrmXmtExtPointSig INTEGER, wfAtmAlcFrmXmtExtIlmiSig INTEGER, wfAtmAlcFrmXmtExtF4F5PrfMan INTEGER, wfAtmAlcFrmXmtExtF4Segment INTEGER, wfAtmAlcFrmXmtExtF4EndEnd INTEGER, wfAtmAlcFrmXmtExtF5Segment INTEGER, wfAtmAlcFrmXmtExtF5EndEnd INTEGER, wfAtmAlcFrmXmtDisUserCell INTEGER, wfAtmAlcFrmXmtDisMetaSig INTEGER, wfAtmAlcFrmXmtDisBcastSig INTEGER, wfAtmAlcFrmXmtDisPointSig INTEGER, wfAtmAlcFrmXmtDisIlmiSig INTEGER, wfAtmAlcFrmXmtDisUnassCell INTEGER, wfAtmAlcFrmXmtDisF4Segment INTEGER, wfAtmAlcFrmXmtDisF4EndEnd INTEGER, wfAtmAlcFrmXmtDisF5Segment INTEGER, wfAtmAlcFrmXmtDisF5EndEnd INTEGER, wfAtmAlcFrmOamEnable INTEGER, wfAtmAlcFrmOamInvertBip INTEGER, wfAtmAlcFrmOamTxPathFerf INTEGER, wfAtmAlcFrmOamTxSectionFerf INTEGER, wfAtmAlcFrmOamTxPathAis INTEGER, wfAtmAlcFrmOamTxSectionAis INTEGER, wfAtmAlcFrmOamTxPathFebe INTEGER, wfAtmAlcFrmOamTxSectionFebe INTEGER, wfAtmAlcFrmStatsSwEnable INTEGER, wfAtmAlcFrmStatsMode INTEGER, wfAtmAlcFrmStatsReceive INTEGER, wfAtmAlcFrmStatsTransmit INTEGER, wfAtmAlcFrmStatsMask INTEGER, wfAtmAlcFrmStatsTimeout INTEGER, wfAtmAlcFrmStatsTimerEna INTEGER, wfAtmAlcFrmStatsOflowEna INTEGER, wfAtmAlcFrmStatsForceDma INTEGER, wfAtmAlcFrmCsiEnable INTEGER, wfAtmAlcFrmCsiLoop INTEGER, wfAtmAlcFrmCsiRcvAtcEnable INTEGER, wfAtmAlcFrmCsiRcvAte INTEGER, wfAtmAlcFrmCsiRcvClpBitOpt INTEGER, wfAtmAlcFrmCsiRcvCongBitOpt INTEGER, wfAtmAlcFrmCsiRoutingTag INTEGER, wfAtmAlcFrmCsiXmtAtcEnable INTEGER, wfAtmAlcFrmCsiXmtAte INTEGER, wfAtmAlcFrmCsiXmtClpBitOpt INTEGER, wfAtmAlcFrmCsiXmtCongBitOpt INTEGER, wfAtmAlcFrmCsiOmitHec INTEGER, wfAtmAlcFrmCsiRcvHecEnable INTEGER, wfAtmAlcFrmCsiRcvHecMask INTEGER, wfAtmAlcFrmDmaChan0Enable INTEGER, wfAtmAlcFrmDmaChan1Enable INTEGER, wfAtmAlcFrmDmaChan2Enable INTEGER, wfAtmAlcFrmDmaChan3Enable INTEGER, wfAtmAlcFrmDmaChan4Enable INTEGER, wfAtmAlcFrmDmaChan5Enable INTEGER, wfAtmAlcFrmDmaEnable INTEGER, wfAtmAlcFrmDmaStop INTEGER, wfAtmAlcFrmDmaPrioritySel INTEGER, wfAtmAlcFrmDmaFastXferMode INTEGER } wfAtmAlcFrmConfDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmAlcFrmConfEntry 1 } wfAtmAlcFrmConfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interface that contains the appropriate management information." ::= { wfAtmAlcFrmConfEntry 2 } wfAtmAlcFrmGenEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Rx/Tx framer enable." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 3 } wfAtmAlcFrmGenFramingMode OBJECT-TYPE SYNTAX INTEGER { cell(1), sdh(2), sonet(3), ds3(4), e3(5), sonetsts1(6), ds3nonplcp(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Framing (transceiver) mode." DEFVAL { sonet } ::= { wfAtmAlcFrmConfEntry 4 } wfAtmAlcFrmGenScramblerEna OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "1+x(6)+x(7) frame scrambler. Only applies to framing standards such as SONET/SDH." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 5 } wfAtmAlcFrmGenDescrambleEna OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "1+x(6)+x(7) frame descrambler. Only applies to framing standards such as SONET/SDH." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 6 } wfAtmAlcFrmGenLoopback OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit to receive framer loopback." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 7 } wfAtmAlcFrmGenSyncFoundCnt OBJECT-TYPE SYNTAX INTEGER(1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Frame sync found count." DEFVAL { 7 } ::= { wfAtmAlcFrmConfEntry 8 } wfAtmAlcFrmGenSyncLostCnt OBJECT-TYPE SYNTAX INTEGER(1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Frame sync lost count." DEFVAL { 8 } ::= { wfAtmAlcFrmConfEntry 9 } wfAtmAlcFrmRcvCellEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Cell receiver enable." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 10 } wfAtmAlcFrmRcvOamCrcCheck OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "OAM cell CRC check." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 11 } wfAtmAlcFrmRcvOamCrcGen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "OAM cell CRC generate." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 12 } wfAtmAlcFrmRcvCellInsPrio OBJECT-TYPE SYNTAX INTEGER { user(1), insert(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Cell insert priority." DEFVAL { user } ::= { wfAtmAlcFrmConfEntry 13 } wfAtmAlcFrmRcvInsertPcr OBJECT-TYPE SYNTAX INTEGER { default(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Peak cell insertion rate." DEFVAL { default } ::= { wfAtmAlcFrmConfEntry 14 } wfAtmAlcFrmRcvGfcIgnore OBJECT-TYPE SYNTAX INTEGER { vpi12(1), vpi8(2) } ACCESS read-write STATUS mandatory DESCRIPTION "GFC field ignore." DEFVAL { vpi8 } ::= { wfAtmAlcFrmConfEntry 15 } wfAtmAlcFrmRcvDescrambleCtl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Descramble control. Only applies to framing standards such as SONET/SDH." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 16 } wfAtmAlcFrmRcvHecRcvMask OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "HEC receive mask." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 17 } wfAtmAlcFrmRcvErrCorrectEna OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Error correction enable." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 18 } wfAtmAlcFrmRcvByteAlignment OBJECT-TYPE SYNTAX INTEGER { nonalign(1), align(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Byte alignment." DEFVAL { nonalign } ::= { wfAtmAlcFrmConfEntry 19 } wfAtmAlcFrmRcvCellSyncFound OBJECT-TYPE SYNTAX INTEGER(1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Cell sync found count." DEFVAL { 7 } ::= { wfAtmAlcFrmConfEntry 20 } wfAtmAlcFrmRcvCellSyncLost OBJECT-TYPE SYNTAX INTEGER(1..15) ACCESS read-write STATUS mandatory DESCRIPTION "Cell sync lost count." DEFVAL { 8 } ::= { wfAtmAlcFrmConfEntry 21 } wfAtmAlcFrmRcvExtUserCell OBJECT-TYPE SYNTAX INTEGER { disabled(1), defined(2), undefined(3), invalid(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract user defined cell." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 22 } wfAtmAlcFrmRcvExtMetaSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract meta signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 23 } wfAtmAlcFrmRcvExtBcastSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract broadcast signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 24 } wfAtmAlcFrmRcvExtPointSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract point-point signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 25 } wfAtmAlcFrmRcvExtIlmiSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract ILMI signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 26 } wfAtmAlcFrmRcvExtF4F5PrfMan OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F4/F5 performance man." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 27 } wfAtmAlcFrmRcvExtF1F3PlOam OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F1/F3 PL-OAM." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 28 } wfAtmAlcFrmRcvExtF4Segment OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F4 segment (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 29 } wfAtmAlcFrmRcvExtF4EndEnd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F4 end-end (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 30 } wfAtmAlcFrmRcvExtF5Segment OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F5 segment (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 31 } wfAtmAlcFrmRcvExtF5EndEnd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F5 end-end (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 32 } wfAtmAlcFrmRcvDisUserCell OBJECT-TYPE SYNTAX INTEGER { disabled(1), defined(2), undefined(3), invalid(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard user defined cell." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 33 } wfAtmAlcFrmRcvDisMetaSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard meta signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 34 } wfAtmAlcFrmRcvDisBcastSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard broadcast signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 35 } wfAtmAlcFrmRcvDisPointSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard point-point signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 36 } wfAtmAlcFrmRcvDisIlmiSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard ILMI signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 37 } wfAtmAlcFrmRcvDisUnassCell OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard unassigned cell." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 38 } wfAtmAlcFrmRcvDisF4Segment OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard F4 segment (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 39 } wfAtmAlcFrmRcvDisF4EndEnd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard F4 end-end (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 40 } wfAtmAlcFrmRcvDisF5Segment OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard F5 segment (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 41 } wfAtmAlcFrmRcvDisF5EndEnd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard F5 end-end (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 42 } wfAtmAlcFrmXmtCellEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Cell transmitter enable." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 43 } wfAtmAlcFrmXmtOamCrcCheck OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "OAM cell CRC check." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 44 } wfAtmAlcFrmXmtOamCrcGen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "OAM cell CRC generate." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 45 } wfAtmAlcFrmXmtCellInsPrio OBJECT-TYPE SYNTAX INTEGER { user(1), insert(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Cell insert priority." DEFVAL { user } ::= { wfAtmAlcFrmConfEntry 46 } wfAtmAlcFrmXmtInsertPcr OBJECT-TYPE SYNTAX INTEGER { default(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Peak cell insertion rate." DEFVAL { default } ::= { wfAtmAlcFrmConfEntry 47 } wfAtmAlcFrmXmtGfcIgnore OBJECT-TYPE SYNTAX INTEGER { vpi12(1), vpi8(2) } ACCESS read-write STATUS mandatory DESCRIPTION "GFC field ignore." DEFVAL { vpi8 } ::= { wfAtmAlcFrmConfEntry 48 } wfAtmAlcFrmXmtCellDecouple OBJECT-TYPE SYNTAX INTEGER { idle(1), unassign(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Cell rate decoupling." DEFVAL { unassign } ::= { wfAtmAlcFrmConfEntry 49 } wfAtmAlcFrmXmtScrambleCtl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Scramble control. Only applies to framing standards such as SONET/SDH." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 50 } wfAtmAlcFrmXmtHecXmtMask OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "HEC transmit mask." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 51 } wfAtmAlcFrmXmtExtUserCell OBJECT-TYPE SYNTAX INTEGER { disabled(1), defined(2), undefined(3), invalid(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract user defined cell." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 52 } wfAtmAlcFrmXmtExtMetaSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract meta signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 53 } wfAtmAlcFrmXmtExtBcastSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract broadcast signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 54 } wfAtmAlcFrmXmtExtPointSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract point-point signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 55 } wfAtmAlcFrmXmtExtIlmiSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract ILMI signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 56 } wfAtmAlcFrmXmtExtF4F5PrfMan OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F4/F5 performance man." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 57 } wfAtmAlcFrmXmtExtF4Segment OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F4 segment (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 58 } wfAtmAlcFrmXmtExtF4EndEnd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F4 end-end (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 59 } wfAtmAlcFrmXmtExtF5Segment OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F5 segment (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 60 } wfAtmAlcFrmXmtExtF5EndEnd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Extract F5 end-end (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 61 } wfAtmAlcFrmXmtDisUserCell OBJECT-TYPE SYNTAX INTEGER { disabled(1), defined(2), undefined(3), invalid(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard user defined cell." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 62 } wfAtmAlcFrmXmtDisMetaSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard meta signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 63 } wfAtmAlcFrmXmtDisBcastSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard broadcast signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 64 } wfAtmAlcFrmXmtDisPointSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard point-point signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 65 } wfAtmAlcFrmXmtDisIlmiSig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard ILMI signalling." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 66 } wfAtmAlcFrmXmtDisUnassCell OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard unassigned cell." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 67 } wfAtmAlcFrmXmtDisF4Segment OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard F4 segment (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 68 } wfAtmAlcFrmXmtDisF4EndEnd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard F4 end-end (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 69 } wfAtmAlcFrmXmtDisF5Segment OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard F5 segment (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 70 } wfAtmAlcFrmXmtDisF5EndEnd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard F5 end-end (FM and AD)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 71 } wfAtmAlcFrmOamEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "OAM controller enable." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 72 } wfAtmAlcFrmOamInvertBip OBJECT-TYPE SYNTAX INTEGER { normal(1), invert(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Invert BIP." DEFVAL { normal } ::= { wfAtmAlcFrmConfEntry 73 } wfAtmAlcFrmOamTxPathFerf OBJECT-TYPE SYNTAX INTEGER { clear(1), auto(2), set(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Tx path FERF." DEFVAL { clear } ::= { wfAtmAlcFrmConfEntry 74 } wfAtmAlcFrmOamTxSectionFerf OBJECT-TYPE SYNTAX INTEGER { clear(1), auto(2), set(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Tx section FERF." DEFVAL { clear } ::= { wfAtmAlcFrmConfEntry 75 } wfAtmAlcFrmOamTxPathAis OBJECT-TYPE SYNTAX INTEGER { clear(1), set(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Tx path AIS." DEFVAL { clear } ::= { wfAtmAlcFrmConfEntry 76 } wfAtmAlcFrmOamTxSectionAis OBJECT-TYPE SYNTAX INTEGER { clear(1), set(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Tx section AIS." DEFVAL { clear } ::= { wfAtmAlcFrmConfEntry 77 } wfAtmAlcFrmOamTxPathFebe OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Tx path FEBE (B3)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 78 } wfAtmAlcFrmOamTxSectionFebe OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Tx section FEBE (B3)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 79 } wfAtmAlcFrmStatsSwEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Switch statistics handler." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 80 } wfAtmAlcFrmStatsMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), header(2), header16(3), header32(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Statistics controller mode." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 81 } wfAtmAlcFrmStatsReceive OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive user statistics." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 82 } wfAtmAlcFrmStatsTransmit OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit statistics." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 83 } wfAtmAlcFrmStatsMask OBJECT-TYPE SYNTAX INTEGER { disabled(1), hmask(2), invalid(3), lmask(4) } ACCESS read-write STATUS mandatory DESCRIPTION "VP/VC filter mask." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 84 } wfAtmAlcFrmStatsTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Statistics DMA transfer timeout." ::= { wfAtmAlcFrmConfEntry 85 } wfAtmAlcFrmStatsTimerEna OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Timer enable (DMA)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 86 } wfAtmAlcFrmStatsOflowEna OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Overflow enable (DMA)." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 87 } wfAtmAlcFrmStatsForceDma OBJECT-TYPE SYNTAX INTEGER { other(1), dma(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Force DMA transfer." DEFVAL { other } ::= { wfAtmAlcFrmConfEntry 88 } wfAtmAlcFrmCsiEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Cell stream enable." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 89 } wfAtmAlcFrmCsiLoop OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "CSI rx/tx loopback." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 90 } wfAtmAlcFrmCsiRcvAtcEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Receive ATC enable." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 91 } wfAtmAlcFrmCsiRcvAte OBJECT-TYPE SYNTAX INTEGER { discard(1), forward(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Address translation error (receive)." DEFVAL { discard } ::= { wfAtmAlcFrmConfEntry 92 } wfAtmAlcFrmCsiRcvClpBitOpt OBJECT-TYPE SYNTAX INTEGER { header(1), xlat(2), force0(3), force1(4) } ACCESS read-write STATUS mandatory DESCRIPTION "CLP bit option (receive)." DEFVAL { header } ::= { wfAtmAlcFrmConfEntry 93 } wfAtmAlcFrmCsiRcvCongBitOpt OBJECT-TYPE SYNTAX INTEGER { header(1), xlat(2), force0(3), force1(4) } ACCESS read-write STATUS mandatory DESCRIPTION "PLT congestion bit option (receive)." DEFVAL { header } ::= { wfAtmAlcFrmConfEntry 94 } wfAtmAlcFrmCsiRoutingTag OBJECT-TYPE SYNTAX INTEGER { tag0(1), tag1(2), tag2(3), tag3(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Routing tag byte size." DEFVAL { tag0 } ::= { wfAtmAlcFrmConfEntry 95 } wfAtmAlcFrmCsiXmtAtcEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Transmit ATC enable." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 96 } wfAtmAlcFrmCsiXmtAte OBJECT-TYPE SYNTAX INTEGER { discard(1), forward(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Address translation error (transmit)." DEFVAL { discard } ::= { wfAtmAlcFrmConfEntry 97 } wfAtmAlcFrmCsiXmtClpBitOpt OBJECT-TYPE SYNTAX INTEGER { header(1), xlat(2), force0(3), force1(4) } ACCESS read-write STATUS mandatory DESCRIPTION "CLP bit option (transmit)." DEFVAL { header } ::= { wfAtmAlcFrmConfEntry 98 } wfAtmAlcFrmCsiXmtCongBitOpt OBJECT-TYPE SYNTAX INTEGER { header(1), xlat(2), force0(3), force1(4) } ACCESS read-write STATUS mandatory DESCRIPTION "PLT congestion bit option (transmit)." DEFVAL { header } ::= { wfAtmAlcFrmConfEntry 99 } wfAtmAlcFrmCsiOmitHec OBJECT-TYPE SYNTAX INTEGER { cell53byte(1), cell52byte(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Omit HEC byte on transmit." DEFVAL { cell53byte } ::= { wfAtmAlcFrmConfEntry 100 } wfAtmAlcFrmCsiRcvHecEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "HEC generator enable." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 101 } wfAtmAlcFrmCsiRcvHecMask OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "ASCI rx path HEC mask." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 102 } wfAtmAlcFrmDmaChan0Enable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DMA channel 0 enable." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 103 } wfAtmAlcFrmDmaChan1Enable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DMA channel 1 enable." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 104 } wfAtmAlcFrmDmaChan2Enable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DMA channel 2 enable." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 105 } wfAtmAlcFrmDmaChan3Enable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DMA channel 3 enable." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 106 } wfAtmAlcFrmDmaChan4Enable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DMA channel 4 enable." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 107 } wfAtmAlcFrmDmaChan5Enable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DMA channel 5 enable." DEFVAL { disabled } ::= { wfAtmAlcFrmConfEntry 108 } wfAtmAlcFrmDmaEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DMA controller enable." DEFVAL { enabled } ::= { wfAtmAlcFrmConfEntry 109 } wfAtmAlcFrmDmaStop OBJECT-TYPE SYNTAX INTEGER { notstopped(1), stopped(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DMA stop." DEFVAL { notstopped } ::= { wfAtmAlcFrmConfEntry 110 } wfAtmAlcFrmDmaPrioritySel OBJECT-TYPE SYNTAX INTEGER { chan0prio(1), chan5prio(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Priority select." DEFVAL { chan0prio } ::= { wfAtmAlcFrmConfEntry 111 } wfAtmAlcFrmDmaFastXferMode OBJECT-TYPE SYNTAX INTEGER { descdma(1), fastdma(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Fast transfer mode." DEFVAL { descdma } ::= { wfAtmAlcFrmConfEntry 112 } wfAtmizerCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmizerCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ARE ATMizer Configuration Record" ::= { wfAtmCellSwitchGroup 1 } wfAtmizerCfgEntry OBJECT-TYPE SYNTAX WfAtmizerCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a Transmit/Receive pair of ATMizers" INDEX { wfAtmizerCfgSlot } ::= { wfAtmizerCfgTable 1 } WfAtmizerCfgEntry ::= SEQUENCE { wfAtmizerCfgSlot INTEGER, wfAtmizerCfgMaxVcl INTEGER, wfAtmizerCfgCurrVcl INTEGER, wfAtmizerCfgRxQueueLenMax INTEGER, wfAtmizerCfgRxQueueTmoMax INTEGER, wfAtmizerCfgRxBuffersMax INTEGER, wfAtmizerCfgRxPagesMax INTEGER, wfAtmizerCfgTxBuffersMax INTEGER, wfAtmizerCfgTxPagesMax INTEGER, wfAtmizerCfgTxPercentRsrcs INTEGER, wfAtmizerCfgHeartbeatPeriod INTEGER, wfAtmizerRxBuffersMax INTEGER, wfAtmizerRxPagesMax INTEGER, wfAtmizerTxBuffersMax INTEGER, wfAtmizerTxPagesMax INTEGER, wfAtmizerTxPercentRsrcs INTEGER, wfAtmizerTxPerVcClipEnable INTEGER, wfAtmizerCfgTxVcBuffersMax INTEGER, wfAtmizerTxVcBuffersMax INTEGER } wfAtmizerCfgSlot OBJECT-TYPE SYNTAX INTEGER(1..14) ACCESS read-only STATUS mandatory DESCRIPTION "Slot number -- instance id." ::= { wfAtmizerCfgEntry 1 } wfAtmizerCfgMaxVcl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum size of a Virtual Channel Links (VCLs) which can be supported by the ATMizers." ::= { wfAtmizerCfgEntry 2 } wfAtmizerCfgCurrVcl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of Virtual Channel Links (VCLs) currently active on the slot." ::= { wfAtmizerCfgEntry 3 } wfAtmizerCfgRxQueueLenMax OBJECT-TYPE SYNTAX INTEGER { default(150) } ACCESS read-write STATUS mandatory DESCRIPTION "The maximum size of a receive buffer list which will be delivered by the RX ATMizer to the driver." DEFVAL { default } ::= { wfAtmizerCfgEntry 4 } wfAtmizerCfgRxQueueTmoMax OBJECT-TYPE SYNTAX INTEGER { default(100) } ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of idle time (in microseconds) the RX ATMizer will wait before delivering its queue of receive buffers to the driver." DEFVAL { default } ::= { wfAtmizerCfgEntry 5 } wfAtmizerCfgRxBuffersMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of receive buffers which the RX ATMizer can own before encountering a lack of resources. This is a configurable option and does not indicate the true value." ::= { wfAtmizerCfgEntry 6 } wfAtmizerCfgRxPagesMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of additional physical pages which the RX ATMizer can own before encountering a lack of resources. This is a configurable option and does not indicate the true value." ::= { wfAtmizerCfgEntry 7 } wfAtmizerCfgTxBuffersMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of transmit buffers which the TX ATMizer can own before it begins clipping. This is a configurable option and does not indicate the true value." ::= { wfAtmizerCfgEntry 8 } wfAtmizerCfgTxPagesMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of additional physical pages which the TX ATMizer can own before encountering a lack of resources. This is a configurable option and does not indicate the true value." ::= { wfAtmizerCfgEntry 9 } wfAtmizerCfgTxPercentRsrcs OBJECT-TYPE SYNTAX INTEGER { default(50) } ACCESS read-write STATUS mandatory DESCRIPTION "The maximum percentage of transmit buffers which the transmit driver can hold before it begins clipping. This is a configurable option and does not indicate the true value." DEFVAL { default } ::= { wfAtmizerCfgEntry 10 } wfAtmizerCfgHeartbeatPeriod OBJECT-TYPE SYNTAX INTEGER { default(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The timer period, in seconds, which defines how often heartbeat messages are sent to the ATMizers." DEFVAL { default } ::= { wfAtmizerCfgEntry 11 } wfAtmizerRxBuffersMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of receive buffers which the RX ATMizer can own before encountering a lack of resources. This value indicates the true value of the Rx buffers available." ::= { wfAtmizerCfgEntry 12 } wfAtmizerRxPagesMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of additional physical pages which the RX ATMizer can own before encountering a lack of resources. This value indicates the true value of the Rx Pages available." ::= { wfAtmizerCfgEntry 13 } wfAtmizerTxBuffersMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of transmit buffers which the TX ATMizer can own before it begins clipping. This value indicates the true value of the Tx buffers available." ::= { wfAtmizerCfgEntry 14 } wfAtmizerTxPagesMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of additional physical pages which the TX ATMizer can own before encountering a lack of resources. This value indicates the true value of the Tx pagess available." ::= { wfAtmizerCfgEntry 15 } wfAtmizerTxPercentRsrcs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum percentage of transmit buffers which the transmit driver can hold before it begins clipping." ::= { wfAtmizerCfgEntry 16 } wfAtmizerTxPerVcClipEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable Transmit per-VC buffer clipping threshold" DEFVAL { disable } ::= { wfAtmizerCfgEntry 17 } wfAtmizerCfgTxVcBuffersMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of buffers which the TX ATMizer can queue for a particular virtual connection before clipping. This is a configurable option and does not indicate the true value." ::= { wfAtmizerCfgEntry 18 } wfAtmizerTxVcBuffersMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of buffers which the TX ATMizer can queue for a particular virtual connection before clipping." ::= { wfAtmizerCfgEntry 19 } wfAtmizerDrvCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmizerDrvCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ATMizer Line Driver Configuration Record" ::= { wfAtmCellSwitchGroup 2 } wfAtmizerDrvCfgEntry OBJECT-TYPE SYNTAX WfAtmizerDrvCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular driver" INDEX { wfAtmizerDrvCfgSlot, wfAtmizerDrvCfgPort } ::= { wfAtmizerDrvCfgTable 1 } WfAtmizerDrvCfgEntry ::= SEQUENCE { wfAtmizerDrvCfgDelete INTEGER, wfAtmizerDrvCfgEnable INTEGER, wfAtmizerDrvCfgState INTEGER, wfAtmizerDrvCfgSlot INTEGER, wfAtmizerDrvCfgPort INTEGER, wfAtmizerDrvCfgCct INTEGER, wfAtmizerDrvCfgLineNumber INTEGER, wfAtmizerDrvCfgType INTEGER, wfAtmizerDrvCfgMtu INTEGER, wfAtmizerDrvCfgSpeed INTEGER, wfAtmizerDrvCfgDpNotify INTEGER, wfAtmizerDrvCfgDpNotifyTimeout INTEGER, wfAtmizerDrvCfgVcInactEnable INTEGER, wfAtmizerDrvCfgVcInactTimeout INTEGER, wfAtmizerDrvCfgMadrCt INTEGER, wfAtmizerDrvCfgMadr OCTET STRING, wfAtmizerDrvCfgFramingMode INTEGER, wfAtmizerDrvCfgClkSource INTEGER, wfAtmizerDrvCfgLogLevel INTEGER, wfAtmizerDrvCfgDsx3SendCode INTEGER, wfAtmizerDrvCfgDsx3LoopbackConfig INTEGER, wfAtmizerDrvCfgDs3Scrambling INTEGER, wfAtmizerDrvCfgDs3LineBuildOut INTEGER, wfAtmizerDrvCfgModule INTEGER, wfAtmizerFramingMode INTEGER, wfAtmizerDrvCfgIwfCct INTEGER, wfAtmizerDrvCfgCcType INTEGER, wfAtmizerDrvCfgMaxVcls INTEGER, wfAtmizerDrvCfgCurrVcls INTEGER, wfAtmizerDrvCfgScrSum INTEGER } wfAtmizerDrvCfgDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmizerDrvCfgEntry 1 } wfAtmizerDrvCfgEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable driver parameter." DEFVAL { enable } ::= { wfAtmizerDrvCfgEntry 2 } wfAtmizerDrvCfgState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(20) } ACCESS read-only STATUS mandatory DESCRIPTION "Driver state parameter. This parameter does not represent the state of the physical interface!" DEFVAL { notpresent } ::= { wfAtmizerDrvCfgEntry 3 } wfAtmizerDrvCfgSlot OBJECT-TYPE SYNTAX INTEGER(1..14) ACCESS read-only STATUS mandatory DESCRIPTION "Slot number -- instance id." ::= { wfAtmizerDrvCfgEntry 4 } wfAtmizerDrvCfgPort OBJECT-TYPE SYNTAX INTEGER { one(1), two(2), three(3), four(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Physical port number -- instance id." ::= { wfAtmizerDrvCfgEntry 5 } wfAtmizerDrvCfgCct OBJECT-TYPE SYNTAX INTEGER(1..1023) ACCESS read-write STATUS mandatory DESCRIPTION "Circuit number for the driver." ::= { wfAtmizerDrvCfgEntry 6 } wfAtmizerDrvCfgLineNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The LineNumber is an Index value used to uniquely identify an instance of a physical ATM port. This value shall be used as an instance identifier for ATM MIB objects." ::= { wfAtmizerDrvCfgEntry 7 } wfAtmizerDrvCfgType OBJECT-TYPE SYNTAX INTEGER { sonet(1), ds3(2), e3(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of interface. This attribute is an alias for 'ifType." ::= { wfAtmizerDrvCfgEntry 8 } wfAtmizerDrvCfgMtu OBJECT-TYPE SYNTAX INTEGER(0..9188) ACCESS read-write STATUS mandatory DESCRIPTION "The size of the largest packet which can be sent/received on the interface, specified in octets. This attribute is an alias for 'ifMtu'." DEFVAL { 4608 } ::= { wfAtmizerDrvCfgEntry 9 } wfAtmizerDrvCfgSpeed OBJECT-TYPE SYNTAX INTEGER { speed622mb(622080000), speed155mb(155520000), speed140mb(140000000), speed100mb(100000000), speed45mb(44736000), speed35mb(34368000) } ACCESS read-only STATUS mandatory DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. This attribute is an alias for 'ifSpeed'." ::= { wfAtmizerDrvCfgEntry 10 } wfAtmizerDrvCfgDpNotify OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Data Path (DP) notify function. This function, when enabled, will disable the DP interface when the physical interface becomes non-operational." DEFVAL { enable } ::= { wfAtmizerDrvCfgEntry 11 } wfAtmizerDrvCfgDpNotifyTimeout OBJECT-TYPE SYNTAX INTEGER(0..3600) ACCESS read-write STATUS mandatory DESCRIPTION "Data Path (DP) notify function timeout period. This value specifies the number of seconds to wait before implementing the DP notify function. A timer will get set to this value when the state of the physical interface transitions from operational to non-operational when the DP notify function is enabled." DEFVAL { 1 } ::= { wfAtmizerDrvCfgEntry 12 } wfAtmizerDrvCfgVcInactEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Inactivity timeout value for all SVCs on this interface in seconds. If no cells have been transmitted or received on an SVC over the given timeout period then the SVC will be closed. If this value is set to zero, then the SVCs inactivity timer will be disabled for this interface." DEFVAL { enable } ::= { wfAtmizerDrvCfgEntry 13 } wfAtmizerDrvCfgVcInactTimeout OBJECT-TYPE SYNTAX INTEGER(60..3600) ACCESS read-write STATUS mandatory DESCRIPTION "Inactivity timeout value for all SVCs on this interface in seconds. If no cells have been transmitted or received on an SVC over the given timeout period then the SVC will be closed." DEFVAL { 1200 } ::= { wfAtmizerDrvCfgEntry 14 } wfAtmizerDrvCfgMadrCt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of PROM-based MAC addresses." ::= { wfAtmizerDrvCfgEntry 15 } wfAtmizerDrvCfgMadr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "First MAC address in canonical format (i.e., 00-00-a2...). The number of subsequent MAC addresses is specified by wfAtmizerDrvCfgMadrCt which are sequential." ::= { wfAtmizerDrvCfgEntry 16 } wfAtmizerDrvCfgFramingMode OBJECT-TYPE SYNTAX INTEGER { sdh(1), sonet(2), cbit(3), m23(4), g751(5), g832(6), cbitnofallback(7), clearchannel(8) } ACCESS read-write STATUS mandatory DESCRIPTION "The framing (transceiver) mode for the physical interface" DEFVAL { sonet } ::= { wfAtmizerDrvCfgEntry 17 } wfAtmizerDrvCfgClkSource OBJECT-TYPE SYNTAX INTEGER { intrn(1), extrn(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Source of the physical interface clocking signal, either internal or external." DEFVAL { intrn } ::= { wfAtmizerDrvCfgEntry 18 } wfAtmizerDrvCfgLogLevel OBJECT-TYPE SYNTAX INTEGER { atmcdbg(1), atmcdb2(2), vcmsg(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Bit mask which controls the amount of logging done by the ATM driver. If a bit in the mask is set, it enables logging of an event class. If a bit is cleared, it disables logging of an event class. ----------------------------------- | | ----------------------------------- 31 0 bit 0 - Link Module Coprocessor debug events bit 1 - VC setup/teardown events" ::= { wfAtmizerDrvCfgEntry 19 } wfAtmizerDrvCfgDsx3SendCode OBJECT-TYPE SYNTAX INTEGER { none(1), line(2), payload(3), reset(4), loop(5), pattern(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates what type of code is being sent across DS3/E3 interface by the device. (These are optional for E3 interfaces.) The values mean: ATM_DSX3_SEND_CODE_NONE : Sending looped or normal data. ATM_DSX3_SEND_CODE_LINE : Sending a request for line loopback. ATM_DSX3_SEND_CODE_PAYLOAD : Sending a request for a payload loopback. (i.e., all Ds1/E1s in a DS3/E3 frame) ATM_DSX3_SEND_CODE_RESET : Sending a loopback deactivation request. ATM_DSX3_SEND_CODE_DS1_LOOP: Requesting to loopback a particular DS1/E1 within a DS3/E3 frame. ATM_DSX3_SEND_TEST_PATTERN : Sending a test pattern." DEFVAL { none } ::= { wfAtmizerDrvCfgEntry 20 } wfAtmizerDrvCfgDsx3LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { none(1), payload(2), line(3), other(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents the loopback configuration of the DS3/E3 interface. Ther values mean: ATM_DSX3_LOOPBACK_NONE : Not in the loopback state/ A device that is not capable of performing a loopback on the interface shall always return this as it's value. ATM_DSX3_LOOPBACK_PAYLOAD : The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. ATM_DSX3_LOOPBACK_LINE : The received signal at this interface does not go through the device (minimum penetration) but is looped back out. ATM_DSX3_LOOPBACK_OTHER : Loopback's that are not defined here." DEFVAL { none } ::= { wfAtmizerDrvCfgEntry 21 } wfAtmizerDrvCfgDs3Scrambling OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents if scrambling is turned on or off" DEFVAL { on } ::= { wfAtmizerDrvCfgEntry 22 } wfAtmizerDrvCfgDs3LineBuildOut OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents the Line Build Out for the DS3 short and long cables. " DEFVAL { short } ::= { wfAtmizerDrvCfgEntry 23 } wfAtmizerDrvCfgModule OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Module number for ASN type platforms. For non-ASN platforms this attribute will not be used." ::= { wfAtmizerDrvCfgEntry 24 } wfAtmizerFramingMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The actual framing (transceiver) mode for the physical interface" ::= { wfAtmizerDrvCfgEntry 25 } wfAtmizerDrvCfgIwfCct OBJECT-TYPE SYNTAX INTEGER(1..1023) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents the circuit number assotiated with FR/ATM Interworking Service record. " ::= { wfAtmizerDrvCfgEntry 26 } wfAtmizerDrvCfgCcType OBJECT-TYPE SYNTAX INTEGER{ none(1), mplsMlm(2), atmCc(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Which one is the Call Control module, ATM or MPLS?" DEFVAL {none} ::= { wfAtmizerDrvCfgEntry 27 } wfAtmizerDrvCfgMaxVcls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of Virtual Channel Links (VCLs) that are supported at the ATM driver interface." ::= { wfAtmizerDrvCfgEntry 28 } wfAtmizerDrvCfgCurrVcls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of Virtual Channel Links (VCLs) currently active." ::= { wfAtmizerDrvCfgEntry 29 } wfAtmizerDrvCfgScrSum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total sum of all VC Sustainable Cell Rates (SCR). Used for Call Admission Control (CAC)." ::= { wfAtmizerDrvCfgEntry 30 } wfAtmizerIntfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmizerIntfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ARE Line Driver Statistics Record" ::= { wfAtmCellSwitchGroup 3 } wfAtmizerIntfStatsEntry OBJECT-TYPE SYNTAX WfAtmizerIntfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular driver" INDEX { wfAtmizerIntfSlot, wfAtmizerIntfPort } ::= { wfAtmizerIntfStatsTable 1 } WfAtmizerIntfStatsEntry ::= SEQUENCE { wfAtmizerIntfSlot INTEGER, wfAtmizerIntfPort INTEGER, wfAtmizerIntfLastChange TimeTicks, wfAtmizerIntfOutQLen Gauge, wfAtmizerIntfStatus INTEGER, wfAtmizerIntfIndex INTEGER, wfAtmizerIntfOcdEvents Counter, wfAtmizerIntfTcAlarmState INTEGER, wfAtmizerIntfRxPacketsOkWrap Counter, wfAtmizerIntfRxPacketsOk Counter, wfAtmizerIntfRxCellsOkWrap Counter, wfAtmizerIntfRxCellsOk Counter, wfAtmizerIntfRxOamCount Counter, wfAtmizerIntfRxFlowCtrlCount Counter, wfAtmizerIntfRxInvalidHeaders Counter, wfAtmizerIntfRxOverSizedSDUs Counter, wfAtmizerIntfRxCrcErrors Counter, wfAtmizerIntfRxCrc10Errors Counter, wfAtmizerIntfRxLackBufCredits Counter, wfAtmizerIntfRxLackPageCredits Counter, wfAtmizerIntfRxLackBufResc Counter, wfAtmizerIntfRxLackPageResc Counter, wfAtmizerIntfTxPacketsOkWrap Counter, wfAtmizerIntfTxPacketsOk Counter, wfAtmizerIntfTxCellsOkWrap Counter, wfAtmizerIntfTxCellsOk Counter, wfAtmizerIntfTxOamCount Counter, wfAtmizerIntfTxFlowCtrlCount Counter, wfAtmizerIntfTxBadVcs Counter, wfAtmizerIntfTxOverSizedSDUs Counter, wfAtmizerIntfTxLackBufCredits Counter, wfAtmizerIntfTxLackPageCredits Counter, wfAtmizerIntfTxDrvClipCount Counter, wfAtmizerIntfHecDetectedCount Counter, wfAtmizerIntfHecCorrectedCount Counter, wfAtmizerIntfRxOctets Counter, wfAtmizerIntfTxOctets Counter } wfAtmizerIntfSlot OBJECT-TYPE SYNTAX INTEGER(1..14) ACCESS read-only STATUS mandatory DESCRIPTION "Slot number -- instance id." ::= { wfAtmizerIntfStatsEntry 1 } wfAtmizerIntfPort OBJECT-TYPE SYNTAX INTEGER { one(1), two(2), three(3), four(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Physical port number -- instance id." ::= { wfAtmizerIntfStatsEntry 2 } wfAtmizerIntfLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundreths of a second) since the network management portion of the system was last re-initialized. This attribute is an alias for 'ifLastChange' in the MIBII System Group." ::= { wfAtmizerIntfStatsEntry 3 } wfAtmizerIntfOutQLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is an alias for 'ifOutQLen' in the MIBII interface group." ::= { wfAtmizerIntfStatsEntry 4 } wfAtmizerIntfStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5) } ACCESS read-only STATUS mandatory DESCRIPTION "MIB-II ifOperStatus" DEFVAL { unknown } ::= { wfAtmizerIntfStatsEntry 5 } wfAtmizerIntfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "MIB-II interface index" ::= { wfAtmizerIntfStatsEntry 6 } wfAtmizerIntfOcdEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the Out of Cell Delineation (OCD) events occur. If seven consecutive ATM cells have Header Error Control (HEC) violations, an OCD event occurs. A high number of OCD events may indicate a problem with the TC sublayer." ::= { wfAtmizerIntfStatsEntry 7 } wfAtmizerIntfTcAlarmState OBJECT-TYPE SYNTAX INTEGER { alarm(1), failure(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is an alarm present for the TC sublayer. The value ATM_LCD_FAILURE indicates that a Loss of Cell Delineation (LCD) failure state has been declared for the TC sublayer. Transition from failure to the ATM_NO_ALARM state occurs when six consecutive ATM cells are received with valid HEC, followed by about 10 seconds of acceptable working signal." ::= { wfAtmizerIntfStatsEntry 8 } wfAtmizerIntfRxPacketsOkWrap OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the wfAtmizerIntfRxPacketsOk counter has wrapped." ::= { wfAtmizerIntfStatsEntry 9 } wfAtmizerIntfRxPacketsOk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Service Data Units (SDUs) received without error." ::= { wfAtmizerIntfStatsEntry 10 } wfAtmizerIntfRxCellsOkWrap OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the wfAtmizerIntfRxCellsOk counter has wrapped." ::= { wfAtmizerIntfStatsEntry 11 } wfAtmizerIntfRxCellsOk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of reassembled Service Data Unit (SDU) cells received without error." ::= { wfAtmizerIntfStatsEntry 12 } wfAtmizerIntfRxOamCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of F4/F5 OAM Cells received on this interface." ::= { wfAtmizerIntfStatsEntry 13 } wfAtmizerIntfRxFlowCtrlCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Flow Control OAM Cells received on this interface." ::= { wfAtmizerIntfStatsEntry 14 } wfAtmizerIntfRxInvalidHeaders OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of receive cells dropped because of bad header fields (invalid VPI/VCI, non-zero GFC, bad PTI field)." ::= { wfAtmizerIntfStatsEntry 15 } wfAtmizerIntfRxOverSizedSDUs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of receive packets dropped because the reassembled SDU was greater than the MTU for this interface." ::= { wfAtmizerIntfStatsEntry 16 } wfAtmizerIntfRxCrcErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received cells dropped because of an invalid CRC." ::= { wfAtmizerIntfStatsEntry 17 } wfAtmizerIntfRxCrc10Errors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM cells dropped because of an invalid CRC-10." ::= { wfAtmizerIntfStatsEntry 18 } wfAtmizerIntfRxLackBufCredits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets lost on this interface because no receive buffer space was available to the receiver for incoming data." ::= { wfAtmizerIntfStatsEntry 19 } wfAtmizerIntfRxLackPageCredits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets lost on this interface because no physical pages were available to the receiver for incoming data." ::= { wfAtmizerIntfStatsEntry 20 } wfAtmizerIntfRxLackBufResc OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets lost on this interface because there were no free system buffers available." ::= { wfAtmizerIntfStatsEntry 21 } wfAtmizerIntfRxLackPageResc OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets lost on this interface because there were no free system pages available." ::= { wfAtmizerIntfStatsEntry 22 } wfAtmizerIntfTxPacketsOkWrap OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the wfAtmizerIntfTxPacketsOk counter has wrapped." ::= { wfAtmizerIntfStatsEntry 23 } wfAtmizerIntfTxPacketsOk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Service Data Units (SDUs) transmitted without error." ::= { wfAtmizerIntfStatsEntry 24 } wfAtmizerIntfTxCellsOkWrap OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the wfAtmizerIntfTxCellsOk counter has wrapped." ::= { wfAtmizerIntfStatsEntry 25 } wfAtmizerIntfTxCellsOk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of segmented Service Data Unit (SDU) cells transmitted without error." ::= { wfAtmizerIntfStatsEntry 26 } wfAtmizerIntfTxOamCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of F4/F5 OAM Cells transmitted on this interface." ::= { wfAtmizerIntfStatsEntry 27 } wfAtmizerIntfTxFlowCtrlCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Flow Control OAM Cells transmitted on this interface." ::= { wfAtmizerIntfStatsEntry 28 } wfAtmizerIntfTxBadVcs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of packets dropped on transmit because of an invalid VPI/VCI." ::= { wfAtmizerIntfStatsEntry 29 } wfAtmizerIntfTxOverSizedSDUs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of transmit packets dropped because their SDU size was greater than the MTU for this interface." ::= { wfAtmizerIntfStatsEntry 30 } wfAtmizerIntfTxLackBufCredits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of transmit packets lost on this interface because no buffer space was available to the transmitter for outgoing data." ::= { wfAtmizerIntfStatsEntry 31 } wfAtmizerIntfTxLackPageCredits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of transmit packets lost on this interface because no physical pages were available to the transmitter for outgoing data." ::= { wfAtmizerIntfStatsEntry 32 } wfAtmizerIntfTxDrvClipCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of transmit packets lost on this interface because no buffer space was available to the host transmit driver for outgoing data." ::= { wfAtmizerIntfStatsEntry 33 } wfAtmizerIntfHecDetectedCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of uncorrectable HEC errors detected on this interface." ::= { wfAtmizerIntfStatsEntry 34 } wfAtmizerIntfHecCorrectedCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of correctable HEC errors detected on this interface." ::= { wfAtmizerIntfStatsEntry 35 } wfAtmizerIntfRxOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of octets received successfully. Note: May not be supported on all ATM-based platforms." ::= { wfAtmizerIntfStatsEntry 36 } wfAtmizerIntfTxOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of octets transmitted successfully. Note: May not be supported on all ATM-based platforms." ::= { wfAtmizerIntfStatsEntry 37 } wfAtmizerVclStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmizerVclStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Virtual Channel Statistics Record" ::= { wfAtmCellSwitchGroup 4 } wfAtmizerVclStatsEntry OBJECT-TYPE SYNTAX WfAtmizerVclStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular virtual channel" INDEX { wfAtmizerVclIndex, wfAtmizerVclVpi, wfAtmizerVclVci } ::= { wfAtmizerVclStatsTable 1 } WfAtmizerVclStatsEntry ::= SEQUENCE { wfAtmizerVclIndex INTEGER, wfAtmizerVclVpi INTEGER, wfAtmizerVclVci INTEGER, wfAtmizerVclRxPacketsOkWrap Counter, wfAtmizerVclRxPacketsOk Counter, wfAtmizerVclRxCellsOkWrap Counter, wfAtmizerVclRxCellsOk Counter, wfAtmizerVclRxOamCount Counter, wfAtmizerVclRxFlowCtrlCount Counter, wfAtmizerVclRxInvalidHeaders Counter, wfAtmizerVclRxOverSizedSDUs Counter, wfAtmizerVclRxCrcErrors Counter, wfAtmizerVclRxCrc10Errors Counter, wfAtmizerVclRxLackBufCredits Counter, wfAtmizerVclRxLackPageCredits Counter, wfAtmizerVclRxLackBufResc Counter, wfAtmizerVclRxLackPageResc Counter, wfAtmizerVclTxPacketsOkWrap Counter, wfAtmizerVclTxPacketsOk Counter, wfAtmizerVclTxCellsOkWrap Counter, wfAtmizerVclTxCellsOk Counter, wfAtmizerVclTxOamCount Counter, wfAtmizerVclTxFlowCtrlCount Counter, wfAtmizerVclTxOverSizedSDUs Counter, wfAtmizerVclTxLackBufCredits Counter, wfAtmizerVclTxLackPageCredits Counter, wfAtmizerVclRxOctets Counter, wfAtmizerVclTxOctets Counter, wfAtmizerVclTxClipFrames Counter } wfAtmizerVclIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance id - Index number of this physical interface." ::= { wfAtmizerVclStatsEntry 1 } wfAtmizerVclVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance id - Virtual Path Id for this VCL." ::= { wfAtmizerVclStatsEntry 2 } wfAtmizerVclVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Instance id - Virtual Channel Id for this VCL." ::= { wfAtmizerVclStatsEntry 3 } wfAtmizerVclRxPacketsOkWrap OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the wfAtmizerVclRxPacketsOk has wrapped." ::= { wfAtmizerVclStatsEntry 4 } wfAtmizerVclRxPacketsOk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets received on this VCL." ::= { wfAtmizerVclStatsEntry 5 } wfAtmizerVclRxCellsOkWrap OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the wfAtmizerVclRxCellsOk has wrapped." ::= { wfAtmizerVclStatsEntry 6 } wfAtmizerVclRxCellsOk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells received on this VCL." ::= { wfAtmizerVclStatsEntry 7 } wfAtmizerVclRxOamCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM cells received on this VCL." ::= { wfAtmizerVclStatsEntry 8 } wfAtmizerVclRxFlowCtrlCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Flow Control cells received on this VCL." ::= { wfAtmizerVclStatsEntry 9 } wfAtmizerVclRxInvalidHeaders OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of receive cells dropped because of an invalid ATM header." ::= { wfAtmizerVclStatsEntry 10 } wfAtmizerVclRxOverSizedSDUs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of receive packets dropped on this VCL because the reassembled SDU was greater than the MTU for this interface." ::= { wfAtmizerVclStatsEntry 11 } wfAtmizerVclRxCrcErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received cells dropped on this VCL because of an invalid CRC." ::= { wfAtmizerVclStatsEntry 12 } wfAtmizerVclRxCrc10Errors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM cells dropped on this VCL because of an invalid CRC-10." ::= { wfAtmizerVclStatsEntry 13 } wfAtmizerVclRxLackBufCredits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets lost on this VCL because no receive buffer space was available to the receiver for incoming data." ::= { wfAtmizerVclStatsEntry 14 } wfAtmizerVclRxLackPageCredits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets lost on this VCL because no physical pages were available to the receiver for incoming data." ::= { wfAtmizerVclStatsEntry 15 } wfAtmizerVclRxLackBufResc OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets lost on this VCL because there were no free system buffers available." ::= { wfAtmizerVclStatsEntry 16 } wfAtmizerVclRxLackPageResc OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets lost on this VCL because there were no free system pages available." ::= { wfAtmizerVclStatsEntry 17 } wfAtmizerVclTxPacketsOkWrap OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the wfAtmizerVclTxPacketsOk has wrapped." ::= { wfAtmizerVclStatsEntry 18 } wfAtmizerVclTxPacketsOk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets transmitted on this VCL." ::= { wfAtmizerVclStatsEntry 19 } wfAtmizerVclTxCellsOkWrap OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the wfAtmizerVclTxCellsOk has wrapped." ::= { wfAtmizerVclStatsEntry 20 } wfAtmizerVclTxCellsOk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of cells transmitted on this VCL." ::= { wfAtmizerVclStatsEntry 21 } wfAtmizerVclTxOamCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of OAM cells transmitted on this VCL." ::= { wfAtmizerVclStatsEntry 22 } wfAtmizerVclTxFlowCtrlCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Flow Control cells received on this VCL." ::= { wfAtmizerVclStatsEntry 23 } wfAtmizerVclTxOverSizedSDUs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of transmit packets dropped on this VCL because their SDU size was greater than the MTU for this interface." ::= { wfAtmizerVclStatsEntry 24 } wfAtmizerVclTxLackBufCredits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of transmit packets lost on this VCL because no buffer space was available to the transmitter for outgoing data." ::= { wfAtmizerVclStatsEntry 25 } wfAtmizerVclTxLackPageCredits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of transmit packets lost on this VCL because no physical pages were available to the transmitter for outgoing data." ::= { wfAtmizerVclStatsEntry 26 } wfAtmizerVclRxOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of octets received successfully. Note: May not be supported on all ATM-based platforms." ::= { wfAtmizerVclStatsEntry 27 } wfAtmizerVclTxOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of octets transmitted successfully. Note: May not be supported on all ATM-based platforms." ::= { wfAtmizerVclStatsEntry 28 } wfAtmizerVclTxClipFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames clipped (dropped) due to transmit congestion. Note: May not be supported on all ATM-based platforms." ::= { wfAtmizerVclStatsEntry 29 } wfAtmizerDebugTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmizerDebugEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ARE ATMizer Debug Record" ::= { wfAtmCellSwitchGroup 5 } wfAtmizerDebugEntry OBJECT-TYPE SYNTAX WfAtmizerDebugEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a Transmit/Receive pair of ATMizers" INDEX { wfAtmizerDebugSlot } ::= { wfAtmizerDebugTable 1 } WfAtmizerDebugEntry ::= SEQUENCE { wfAtmizerDebugSlot INTEGER, wfAtmizerDebugCmd INTEGER, wfAtmizerDebugCmdSize INTEGER, wfAtmizerDebugParam1 INTEGER, wfAtmizerDebugParam2 INTEGER, wfAtmizerDebugParam3 INTEGER, wfAtmizerDebugParam4 INTEGER, wfAtmizerDebugParam5 INTEGER, wfAtmizerDebugParam6 INTEGER, wfAtmizerDebugParam7 INTEGER, wfAtmizerDebugParam8 INTEGER, wfAtmizerDebugParam9 INTEGER, wfAtmizerDebugParam10 INTEGER, wfAtmizerDebugRxDone INTEGER, wfAtmizerDebugRxValue OCTET STRING, wfAtmizerDebugTxDone INTEGER, wfAtmizerDebugTxValue OCTET STRING } wfAtmizerDebugSlot OBJECT-TYPE SYNTAX INTEGER(1..14) ACCESS read-only STATUS mandatory DESCRIPTION "Slot number -- instance id." ::= { wfAtmizerDebugEntry 1 } wfAtmizerDebugCmd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Debug command to be issued to ATMizers." ::= { wfAtmizerDebugEntry 2 } wfAtmizerDebugCmdSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of parameters to the debug command." ::= { wfAtmizerDebugEntry 3 } wfAtmizerDebugParam1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The first parameter to the ATMizer debug command." ::= { wfAtmizerDebugEntry 4 } wfAtmizerDebugParam2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The second parameter to the ATMizer debug command." ::= { wfAtmizerDebugEntry 5 } wfAtmizerDebugParam3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The third parameter to the ATMizer debug command." ::= { wfAtmizerDebugEntry 6 } wfAtmizerDebugParam4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The fourth parameter to the ATMizer debug command." ::= { wfAtmizerDebugEntry 7 } wfAtmizerDebugParam5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The fifth parameter to the ATMizer debug command." ::= { wfAtmizerDebugEntry 8 } wfAtmizerDebugParam6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The sixth parameter to the ATMizer debug command." ::= { wfAtmizerDebugEntry 9 } wfAtmizerDebugParam7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The seventh parameter to the ATMizer debug command." ::= { wfAtmizerDebugEntry 10 } wfAtmizerDebugParam8 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The eighth parameter to the ATMizer debug command." ::= { wfAtmizerDebugEntry 11 } wfAtmizerDebugParam9 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The nineth parameter to the ATMizer debug command." ::= { wfAtmizerDebugEntry 12 } wfAtmizerDebugParam10 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The tenth parameter to the ATMizer debug command." ::= { wfAtmizerDebugEntry 13 } wfAtmizerDebugRxDone OBJECT-TYPE SYNTAX INTEGER { inprog(1), done(2), err(16) } ACCESS read-write STATUS mandatory DESCRIPTION "Completion flag indicating that the RX ATMizer has completed the debug command and the result is available in wfAtmizerDebugRxValue." DEFVAL { inprog } ::= { wfAtmizerDebugEntry 14 } wfAtmizerDebugRxValue OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The result of the RX ATMizer debug operation." ::= { wfAtmizerDebugEntry 15 } wfAtmizerDebugTxDone OBJECT-TYPE SYNTAX INTEGER { inprog(1), done(2), err(16) } ACCESS read-write STATUS mandatory DESCRIPTION "Completion flag indicating that the TX ATMizer has completed the debug command and the result is available in wfAtmizerDebugTxValue." DEFVAL { inprog } ::= { wfAtmizerDebugEntry 16 } wfAtmizerDebugTxValue OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The result of the TX ATMizer debug operation." ::= { wfAtmizerDebugEntry 17 } wfSonetMediumTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetMediumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET medium table" ::= { wfSonetGroup 1 } wfSonetMediumEntry OBJECT-TYPE SYNTAX WfSonetMediumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the medium table" INDEX { wfSonetMediumIndex } ::= { wfSonetMediumTable 1 } WfSonetMediumEntry ::= SEQUENCE { wfSonetMediumIndex INTEGER, wfSonetMediumType INTEGER, wfSonetMediumTimeElapsed INTEGER, wfSonetMediumValidIntervals INTEGER, wfSonetMediumLineCoding INTEGER, wfSonetMediumLineType INTEGER, wfSonetMediumCircuitIdentifier DisplayString } wfSonetMediumIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetMediumEntry 1 } wfSonetMediumType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable identifies whether a SONET or a SDH signal is used across this interface." ::= { wfSonetMediumEntry 2 } wfSonetMediumTimeElapsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error-measurement period." ::= { wfSonetMediumEntry 3 } wfSonetMediumValidIntervals OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous intervals for which valid data has been stored." ::= { wfSonetMediumEntry 4 } wfSonetMediumLineCoding OBJECT-TYPE SYNTAX INTEGER { other(1), b3zs(2), cmi(3), nrz(4), rz(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable describes the line coding for this interface." DEFVAL { nrz } ::= { wfSonetMediumEntry 5 } wfSonetMediumLineType OBJECT-TYPE SYNTAX INTEGER { other(1), shortsinglemode(2), longsinglemode(3), multimode(4), coax(5), utp(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable describes the line type for this interface." DEFVAL { shortsinglemode } ::= { wfSonetMediumEntry 6 } wfSonetMediumCircuitIdentifier OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the transmission vendor's circuit identifier." ::= { wfSonetMediumEntry 7 } wfSonetSectionCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetSectionCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET section current table" ::= { wfSonetGroup 2 } wfSonetSectionCurrentEntry OBJECT-TYPE SYNTAX WfSonetSectionCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Section current table" INDEX { wfSonetSectionCurrentIndex } ::= { wfSonetSectionCurrentTable 1 } WfSonetSectionCurrentEntry ::= SEQUENCE { wfSonetSectionCurrentIndex INTEGER, wfSonetSectionCurrentStatus INTEGER, wfSonetSectionCurrentESs Gauge, wfSonetSectionCurrentSESs Gauge, wfSonetSectionCurrentSEFSs Gauge, wfSonetSectionCurrentCVs Gauge } wfSonetSectionCurrentIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetSectionCurrentEntry 1 } wfSonetSectionCurrentStatus OBJECT-TYPE SYNTAX INTEGER { nodefect(1), los(2), lof(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable is a bitmask indicating the status of the interface." DEFVAL { nodefect } ::= { wfSonetSectionCurrentEntry 2 } wfSonetSectionCurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the current 15 minute interval." ::= { wfSonetSectionCurrentEntry 3 } wfSonetSectionCurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the current 15 minute interval." ::= { wfSonetSectionCurrentEntry 4 } wfSonetSectionCurrentSEFSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the current 15 minute interval." ::= { wfSonetSectionCurrentEntry 5 } wfSonetSectionCurrentCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in the current 15 minute interval." ::= { wfSonetSectionCurrentEntry 6 } wfSonetSectionIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetSectionIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET section interval table" ::= { wfSonetGroup 3 } wfSonetSectionIntervalEntry OBJECT-TYPE SYNTAX WfSonetSectionIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Section Interval table" INDEX { wfSonetSectionIntervalIndex, wfSonetSectionIntervalNumber } ::= { wfSonetSectionIntervalTable 1 } WfSonetSectionIntervalEntry ::= SEQUENCE { wfSonetSectionIntervalIndex INTEGER, wfSonetSectionIntervalNumber INTEGER, wfSonetSectionIntervalESs Gauge, wfSonetSectionIntervalSESs Gauge, wfSonetSectionIntervalSEFSs Gauge, wfSonetSectionIntervalCVs Gauge } wfSonetSectionIntervalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetSectionIntervalEntry 1 } wfSonetSectionIntervalNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { wfSonetSectionIntervalEntry 2 } wfSonetSectionIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15 minute interval." ::= { wfSonetSectionIntervalEntry 3 } wfSonetSectionIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15 minute interval." ::= { wfSonetSectionIntervalEntry 4 } wfSonetSectionIntervalSEFSs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15 minute interval." ::= { wfSonetSectionIntervalEntry 5 } wfSonetSectionIntervalCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15 minute interval." ::= { wfSonetSectionIntervalEntry 6 } wfSonetLineCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetLineCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET line current table" ::= { wfSonetGroup 4 } wfSonetLineCurrentEntry OBJECT-TYPE SYNTAX WfSonetLineCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Line current table" INDEX { wfSonetLineCurrentIndex } ::= { wfSonetLineCurrentTable 1 } WfSonetLineCurrentEntry ::= SEQUENCE { wfSonetLineCurrentIndex INTEGER, wfSonetLineCurrentStatus INTEGER, wfSonetLineCurrentESs Gauge, wfSonetLineCurrentSESs Gauge, wfSonetLineCurrentCVs Gauge, wfSonetLineCurrentUASs Gauge } wfSonetLineCurrentIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetLineCurrentEntry 1 } wfSonetLineCurrentStatus OBJECT-TYPE SYNTAX INTEGER { nodefect(1), ais(2), rdi(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable is a bitmask indicating the status of the interface." DEFVAL { nodefect } ::= { wfSonetLineCurrentEntry 2 } wfSonetLineCurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval." ::= { wfSonetLineCurrentEntry 3 } wfSonetLineCurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval." ::= { wfSonetLineCurrentEntry 4 } wfSonetLineCurrentCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in the current 15 minute interval." ::= { wfSonetLineCurrentEntry 5 } wfSonetLineCurrentUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in the current 15 minute interval." ::= { wfSonetLineCurrentEntry 6 } wfSonetLineIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetLineIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET line interval table" ::= { wfSonetGroup 5 } wfSonetLineIntervalEntry OBJECT-TYPE SYNTAX WfSonetLineIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Line Interval table" INDEX { wfSonetLineIntervalIndex, wfSonetLineIntervalNumber } ::= { wfSonetLineIntervalTable 1 } WfSonetLineIntervalEntry ::= SEQUENCE { wfSonetLineIntervalIndex INTEGER, wfSonetLineIntervalNumber INTEGER, wfSonetLineIntervalESs Gauge, wfSonetLineIntervalSESs Gauge, wfSonetLineIntervalCVs Gauge, wfSonetLineIntervalUASs Gauge } wfSonetLineIntervalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetLineIntervalEntry 1 } wfSonetLineIntervalNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { wfSonetLineIntervalEntry 2 } wfSonetLineIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15 minute interval." ::= { wfSonetLineIntervalEntry 3 } wfSonetLineIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15 minute interval." ::= { wfSonetLineIntervalEntry 4 } wfSonetLineIntervalCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15 minute interval." ::= { wfSonetLineIntervalEntry 5 } wfSonetLineIntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15 minute interval." ::= { wfSonetLineIntervalEntry 6 } wfSonetFarEndLineCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetFarEndLineCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET far end line current table" ::= { wfSonetGroup 6 } wfSonetFarEndLineCurrentEntry OBJECT-TYPE SYNTAX WfSonetFarEndLineCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the FarEndLine current table" INDEX { wfSonetFarEndLineCurrentIndex } ::= { wfSonetFarEndLineCurrentTable 1 } WfSonetFarEndLineCurrentEntry ::= SEQUENCE { wfSonetFarEndLineCurrentIndex INTEGER, wfSonetFarEndLineCurrentESs Gauge, wfSonetFarEndLineCurrentSESs Gauge, wfSonetFarEndLineCurrentCVs Gauge, wfSonetFarEndLineCurrentUASs Gauge } wfSonetFarEndLineCurrentIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetFarEndLineCurrentEntry 1 } wfSonetFarEndLineCurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval." ::= { wfSonetFarEndLineCurrentEntry 2 } wfSonetFarEndLineCurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval." ::= { wfSonetFarEndLineCurrentEntry 3 } wfSonetFarEndLineCurrentCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval." ::= { wfSonetFarEndLineCurrentEntry 4 } wfSonetFarEndLineCurrentUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval." ::= { wfSonetFarEndLineCurrentEntry 5 } wfSonetFarEndLineIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetFarEndLineIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET far end line interval table" ::= { wfSonetGroup 7 } wfSonetFarEndLineIntervalEntry OBJECT-TYPE SYNTAX WfSonetFarEndLineIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the FarEndLine Interval table" INDEX { wfSonetFarEndLineIntervalIndex, wfSonetFarEndLineIntervalNumber } ::= { wfSonetFarEndLineIntervalTable 1 } WfSonetFarEndLineIntervalEntry ::= SEQUENCE { wfSonetFarEndLineIntervalIndex INTEGER, wfSonetFarEndLineIntervalNumber INTEGER, wfSonetFarEndLineIntervalESs Gauge, wfSonetFarEndLineIntervalSESs Gauge, wfSonetFarEndLineIntervalCVs Gauge, wfSonetFarEndLineIntervalUASs Gauge } wfSonetFarEndLineIntervalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetFarEndLineIntervalEntry 1 } wfSonetFarEndLineIntervalNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { wfSonetFarEndLineIntervalEntry 2 } wfSonetFarEndLineIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval." ::= { wfSonetFarEndLineIntervalEntry 3 } wfSonetFarEndLineIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval." ::= { wfSonetFarEndLineIntervalEntry 4 } wfSonetFarEndLineIntervalCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval." ::= { wfSonetFarEndLineIntervalEntry 5 } wfSonetFarEndLineIntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Medium/Section/Line in the current 15 minute interval." ::= { wfSonetFarEndLineIntervalEntry 6 } wfSonetPathCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetPathCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET path current table" ::= { wfSonetGroup 8 } wfSonetPathCurrentEntry OBJECT-TYPE SYNTAX WfSonetPathCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Path current table" INDEX { wfSonetPathCurrentIndex } ::= { wfSonetPathCurrentTable 1 } WfSonetPathCurrentEntry ::= SEQUENCE { wfSonetPathCurrentIndex INTEGER, wfSonetPathCurrentWidth INTEGER, wfSonetPathCurrentStatus INTEGER, wfSonetPathCurrentESs Gauge, wfSonetPathCurrentSESs Gauge, wfSonetPathCurrentCVs Gauge, wfSonetPathCurrentUASs Gauge } wfSonetPathCurrentIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetPathCurrentEntry 1 } wfSonetPathCurrentWidth OBJECT-TYPE SYNTAX INTEGER { sts1(1), sts3cstm1(2), sts12cstm4(3), sts24c(4), sts48cstm16(5) } ACCESS read-only STATUS mandatory DESCRIPTION "A value that indicates the type of the SONET/SDH Path." DEFVAL { sts3cstm1 } ::= { wfSonetPathCurrentEntry 2 } wfSonetPathCurrentStatus OBJECT-TYPE SYNTAX INTEGER { nodefect(1), stslop(2), stsais(4), stsrdi(8), unequipped(16), siglabelmis(32) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable is a bitmask indicating the status of the interface." DEFVAL { nodefect } ::= { wfSonetPathCurrentEntry 3 } wfSonetPathCurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval." ::= { wfSonetPathCurrentEntry 4 } wfSonetPathCurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval." ::= { wfSonetPathCurrentEntry 5 } wfSonetPathCurrentCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval." ::= { wfSonetPathCurrentEntry 6 } wfSonetPathCurrentUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Path in the current 15 minute interval." ::= { wfSonetPathCurrentEntry 7 } wfSonetPathIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetPathIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET path interval table" ::= { wfSonetGroup 9 } wfSonetPathIntervalEntry OBJECT-TYPE SYNTAX WfSonetPathIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Path Interval table" INDEX { wfSonetPathIntervalIndex, wfSonetPathIntervalNumber } ::= { wfSonetPathIntervalTable 1 } WfSonetPathIntervalEntry ::= SEQUENCE { wfSonetPathIntervalIndex INTEGER, wfSonetPathIntervalNumber INTEGER, wfSonetPathIntervalESs Gauge, wfSonetPathIntervalSESs Gauge, wfSonetPathIntervalCVs Gauge, wfSonetPathIntervalUASs Gauge } wfSonetPathIntervalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetPathIntervalEntry 1 } wfSonetPathIntervalNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { wfSonetPathIntervalEntry 2 } wfSonetPathIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in a particular 15 minute interval." ::= { wfSonetPathIntervalEntry 3 } wfSonetPathIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in a particular 15 minute interval." ::= { wfSonetPathIntervalEntry 4 } wfSonetPathIntervalCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in a particular 15 minute interval." ::= { wfSonetPathIntervalEntry 5 } wfSonetPathIntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Path in a particular 15 minute interval." ::= { wfSonetPathIntervalEntry 6 } wfSonetFarEndPathCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetFarEndPathCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET far end path current table" ::= { wfSonetGroup 10 } wfSonetFarEndPathCurrentEntry OBJECT-TYPE SYNTAX WfSonetFarEndPathCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Far End Path current table" INDEX { wfSonetFarEndPathCurrentIndex } ::= { wfSonetFarEndPathCurrentTable 1 } WfSonetFarEndPathCurrentEntry ::= SEQUENCE { wfSonetFarEndPathCurrentIndex INTEGER, wfSonetFarEndPathCurrentESs Gauge, wfSonetFarEndPathCurrentSESs Gauge, wfSonetFarEndPathCurrentCVs Gauge, wfSonetFarEndPathCurrentUASs Gauge } wfSonetFarEndPathCurrentIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetFarEndPathCurrentEntry 1 } wfSonetFarEndPathCurrentESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval." ::= { wfSonetFarEndPathCurrentEntry 2 } wfSonetFarEndPathCurrentSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval." ::= { wfSonetFarEndPathCurrentEntry 3 } wfSonetFarEndPathCurrentCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval." ::= { wfSonetFarEndPathCurrentEntry 4 } wfSonetFarEndPathCurrentUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path in the current 15 minute interval." ::= { wfSonetFarEndPathCurrentEntry 5 } wfSonetFarEndPathIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSonetFarEndPathIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET far end path interval table" ::= { wfSonetGroup 11 } wfSonetFarEndPathIntervalEntry OBJECT-TYPE SYNTAX WfSonetFarEndPathIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Far End Path Interval table" INDEX { wfSonetFarEndPathIntervalIndex, wfSonetFarEndPathIntervalNumber } ::= { wfSonetFarEndPathIntervalTable 1 } WfSonetFarEndPathIntervalEntry ::= SEQUENCE { wfSonetFarEndPathIntervalIndex INTEGER, wfSonetFarEndPathIntervalNumber INTEGER, wfSonetFarEndPathIntervalESs Gauge, wfSonetFarEndPathIntervalSESs Gauge, wfSonetFarEndPathIntervalCVs Gauge, wfSonetFarEndPathIntervalUASs Gauge } wfSonetFarEndPathIntervalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfSonetFarEndPathIntervalEntry 1 } wfSonetFarEndPathIntervalNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { wfSonetFarEndPathIntervalEntry 2 } wfSonetFarEndPathIntervalESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Path in a particular 15 minute interval." ::= { wfSonetFarEndPathIntervalEntry 3 } wfSonetFarEndPathIntervalSESs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path in a particular 15 minute interval." ::= { wfSonetFarEndPathIntervalEntry 4 } wfSonetFarEndPathIntervalCVs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Coding Violations encountered by a SONET/SDH Path in a particular 15 minute interval." ::= { wfSonetFarEndPathIntervalEntry 5 } wfSonetFarEndPathIntervalUASs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path in a particular 15 minute interval." ::= { wfSonetFarEndPathIntervalEntry 6 } wfAtmVcGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmVcGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains VC grouping configuration paramters, one entry per VC group." ::= { wfAtmCommonGroup 12 } wfAtmVcGroupEntry OBJECT-TYPE SYNTAX WfAtmVcGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmVcGroupCct, wfAtmVcGroupIndex } ::= { wfAtmVcGroupTable 1 } WfAtmVcGroupEntry ::= SEQUENCE { wfAtmVcGroupDelete INTEGER, wfAtmVcGroupCct INTEGER, wfAtmVcGroupIndex INTEGER, wfAtmVcGroupName DisplayString } wfAtmVcGroupDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { create } ::= { wfAtmVcGroupEntry 1 } wfAtmVcGroupCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The circuit number that this VC group is configured for." ::= { wfAtmVcGroupEntry 2 } wfAtmVcGroupIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the VC group on a given circuit" ::= { wfAtmVcGroupEntry 3 } wfAtmVcGroupName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name for the VC group" ::= { wfAtmVcGroupEntry 4 } END -- Wellfleet-ATM-MIB