A3COM-AUDL-r1-MIB.mib object view, vendor 3Com
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file A3COM-AUDL-r1-MIB and use it to monitor vendor specific OID's.
A3COM-AUDL-r1-MIB file content
Object view of A3COM-AUDL-r1-MIB:
| Scalar Object |
| a3ComAudlControlAuditTrail |
.1.3.6.1.4.1.43.2.29.1.1 |
|
This parameter enables/disables the log message AuditTrail
category which logs the AuditTrail messages. A default
value of 2 means no AuditTrail.
|
| a3ComAudlControlConfig |
.1.3.6.1.4.1.43.2.29.1.2 |
|
This parameter enables/disables the log message COnfig
category which logs the SET/SETD/ADD/DELETE commands and
other commands such as SysPassWord, SU, Login, Listen etc.
The default value of 2 means no COnfig.
|
| a3ComAudlControlMessages |
.1.3.6.1.4.1.43.2.29.1.3 |
|
This parameter enables/disables the log message MEssages
category which log System Message and Dial History. The
default value of 2 means no MEssages.
|
| a3ComAudlControlSecurity |
.1.3.6.1.4.1.43.2.29.1.4 |
|
This parameter enables/disables the log message SEcurity
category which logs faulted set privilege, failed login and
invalid community string. The default 2 means no SEcurity.
|
| a3ComAudlLogServerAddr |
.1.3.6.1.4.1.43.2.29.2.1 |
|
This is the IP address of a log server which has syslog
daemon active with proper syslog configuration.
|
| a3ComAudlPriorityLevel |
.1.3.6.1.4.1.43.2.29.2.2 |
|
The level is used with facility to format a priority
which used as a tag in log message before sending it
to syslog daemon. It also controls the log sending
operation, a log message with higher Level will be
be sent together with what has been in Audit Log
buffer, to a LogServerAddr immediately.
|
| a3ComAudlMaxLog |
.1.3.6.1.4.1.43.2.29.2.3 |
|
It decides the maximum number of log commands/messages
could accumulate in Audit Log buffer before sending to
a LogServerAddr. Value 1 means send each log without
buffering.
|
| a3ComAudlIdleTime |
.1.3.6.1.4.1.43.2.29.2.4 |
|
This controls the idle time in minute till sending
Audit log buffer if it has data. Value of 0 means
this idle time is disabled.
|
| Object Identifier |
| a3Com |
.1.3.6.1.4.1.43 |
| brouterMIB |
.1.3.6.1.4.1.43.2 |
| a3ComAuditLog |
.1.3.6.1.4.1.43.2.29 |
| a3ComAudlControl |
.1.3.6.1.4.1.43.2.29.1 |
| a3ComAudlConfig |
.1.3.6.1.4.1.43.2.29.2 |
