| chassisId |
.1.3.6.1.4.1.43.7.1.1.1 |
|
The unique identifier assigned to this
station during manufacturing.
|
| chassisType |
.1.3.6.1.4.1.43.7.1.1.2 |
|
The type of the LinkBuilder 3GH
chassis.
|
| chassisRevision |
.1.3.6.1.4.1.43.7.1.1.3 |
|
The revision number of this chassis.
|
| chassisName |
.1.3.6.1.4.1.43.7.1.1.4 |
|
The text string describing this
chassis.
|
| chassisNameAbbrev |
.1.3.6.1.4.1.43.7.1.1.5 |
|
The text string describing the generic
name for this chassis.
|
| chassisManufacturer |
.1.3.6.1.4.1.43.7.1.1.6 |
|
The text string describing the
manufacturer of this chassis.
|
| chassisSlotCount |
.1.3.6.1.4.1.43.7.1.1.7 |
|
The number of slots in this chassis.
|
| chassisBuildTime |
.1.3.6.1.4.1.43.7.1.1.8 |
|
The build time of the LinkBuilder 3GH
system software.
|
| chassisSoftwareRevision |
.1.3.6.1.4.1.43.7.1.1.9 |
|
The revision number of the
LinkBuilder 3GH system software.
|
| chassisControlPanelColumns |
.1.3.6.1.4.1.43.7.1.1.10 |
|
The number of columns in the control
panel display.
|
| chassisControlPanelLines |
.1.3.6.1.4.1.43.7.1.1.11 |
|
The number of lines in the control
panel display.
|
| chassisControlPanelText |
.1.3.6.1.4.1.43.7.1.1.12 |
|
The text currently displayed in the
control panel display.
|
| chassisAction |
.1.3.6.1.4.1.43.7.1.1.13 |
|
This object, when read, always returns
the value other (1). The result of
setting this object to each acceptable
value is:
reset: resets the LinkBuilder
3GH system.
|
| slotEntry |
.1.3.6.1.4.1.43.7.1.2.1.1 |
|
A slot entry contains information
common to a specified slot within a
LinkBuilder 3GH system.
|
| smmEntry |
.1.3.6.1.4.1.43.7.1.3.1.1 |
|
An SMM entry contains information
common to a single System Management
Module (SMM) within a LinkBuilder 3GH
system.
|
| fbcmEntry |
.1.3.6.1.4.1.43.7.1.4.1.1 |
|
An FBCM entry contains information
common to a single FDDI Backbone
Connectivity Module (FBCM) within a
LinkBuilder 3GH system.
|
| fcmEntry |
.1.3.6.1.4.1.43.7.1.5.1.1 |
|
An FCM entry contains information
common to a single FDDI Concentrator
Module (FCM) within a LinkBuilder 3GH
system.
|
| portEntry |
.1.3.6.1.4.1.43.7.1.6.1.1 |
|
A port entry contains information
common to a particular port located on
a particular board within the
LinkBuilder 3GH system.
|
| elmEntry |
.1.3.6.1.4.1.43.7.1.7.1.1 |
|
An ELM entry contains information
common to a single Ethernet LAN Module
(ELM) within a LinkBuilder 3GH system.
|
| elmFddiMACEntry |
.1.3.6.1.4.1.43.7.1.8.1.1 |
|
An ELM FDDI MAC entry contains
information common to an FDDI MAC
located on an ELM within a
LinkBuilder 3GH system.
|
| elmEthernetPortEntry |
.1.3.6.1.4.1.43.7.1.9.1.1 |
|
An ELM Ethernet LAN port entry contains
information common to an Ethernet port
located on an Ethernet LAN Module (ELM)
within a LinkBuilder 3GH system.
|
| elmEthernetMACAddressEntry |
.1.3.6.1.4.1.43.7.1.10.1.1 |
|
A collection of information describing
a remote Ethernet MAC detected to be
attached to an Ethernet LAN port.
|
| lbSystemId |
.1.3.6.1.4.1.43.7.1.11.1 |
|
The unique identifier assigned to this system
during manufacturing.
|
| lbSystemType |
.1.3.6.1.4.1.43.7.1.11.2 |
|
The type of the LinkBuilder system.
|
| lbSystemName |
.1.3.6.1.4.1.43.7.1.11.3 |
|
The text string describing this system.
|
| lbSystemManufacturer |
.1.3.6.1.4.1.43.7.1.11.4 |
|
The text string describing the manufacturer of
this system.
|
| lbSystemBackplaneRevision |
.1.3.6.1.4.1.43.7.1.11.5 |
|
The revision level of the system backplane.
Bits 6 and 7 indicate the artwork revision.
Bits 0 through 5 indicate the rework level.
|
| lbSystemSlotCount |
.1.3.6.1.4.1.43.7.1.11.6 |
|
The number of slots in the system.
|
| lbSystemMemorySize |
.1.3.6.1.4.1.43.7.1.11.7 |
|
The amount of memory (RAM), in bytes, present
on the system processor board.
|
| lbSystemFlashMemorySize |
.1.3.6.1.4.1.43.7.1.11.8 |
|
The amount of flash memory, in bytes, present
on the system processor board.
|
| lbSystemNvMemorySize |
.1.3.6.1.4.1.43.7.1.11.9 |
|
The amount of non-volatile memory, in bytes,
present on the system processor board.
|
| lbSystemSoftwareRevision |
.1.3.6.1.4.1.43.7.1.11.10 |
|
The revision number of the LinkBuilder system software.
Each byte indicates the following:
byte 0: major release number.
byte 1: minor release number.
byte 2: update number.
byte 3:
bits 7-6: release type.
bits 5-0: supplemental identifier.
|
| lbSystemBuildTime |
.1.3.6.1.4.1.43.7.1.11.11 |
|
The build time of the system software.
|
| lbSystemControlPanelHardwareRevision |
.1.3.6.1.4.1.43.7.1.11.12 |
|
An 8-bit value specifying the revision level of
the control panel hardware.
|
| lbSystemControlPanelSoftwareRevision |
.1.3.6.1.4.1.43.7.1.11.13 |
|
An 8-bit value specifying the revision level of
the control panel software.
|
| lbSystemControlPanelLines |
.1.3.6.1.4.1.43.7.1.11.14 |
|
The number of lines in the control panel
display.
|
| lbSystemControlPanelColumns |
.1.3.6.1.4.1.43.7.1.11.15 |
|
The number of columns in the control panel
display.
|
| lbSystemControlPanelText |
.1.3.6.1.4.1.43.7.1.11.16 |
|
The currently displayed text in the control panel
display.
|
| lbSystemFddiMacCount |
.1.3.6.1.4.1.43.7.1.11.17 |
|
The number of FDDI MAC's present in the system.
|
| lbSystemFddiPortCount |
.1.3.6.1.4.1.43.7.1.11.18 |
|
The number of FDDI ports present in the system.
|
| lbSystemEthernetPortCount |
.1.3.6.1.4.1.43.7.1.11.19 |
|
The number of ethernet ports present in the system.
|
| lbSystemExpressFunctionCount |
.1.3.6.1.4.1.43.7.1.11.20 |
|
The number of Ethernet Express functions present in
the system. Curently this value is equal to the number
of Express boards present in the system.
|
| lbSystemExpressFddiPortCount |
.1.3.6.1.4.1.43.7.1.11.21 |
|
The number of Ethernet Express FDDI ports present
in the system.
|
| lbSystemExpressEthernetPortCount |
.1.3.6.1.4.1.43.7.1.11.22 |
|
The number of Ethernet Express ethernet ports
present in the system.
|
| lbSystemPowerSupplyCount |
.1.3.6.1.4.1.43.7.1.11.23 |
|
The number of power supply units present in the system.
|
| lbSystemAction |
.1.3.6.1.4.1.43.7.1.11.24 |
|
This object, when read, always returns the value other (1).
The behavior of setting this object to each of the
acceptable values is as follows:
reset: resets the LinkBuilder system.
|
| lbSystemBridgeFunctionCount |
.1.3.6.1.4.1.43.7.1.11.25 |
|
The number of bridge functions present in
the system. Curently this value is equal to the sum of
the number of Express and Switching modules in the system.
|
| lbSystemSmtProxyTimeoutBase |
.1.3.6.1.4.1.43.7.1.11.26 |
|
The initial timeout value, in seconds, before the SMT
proxy attempts to backoff and retry. Since the SMT proxy
will attempt three retries before determining that the
proxied station is not answering, with the timeout
doubling for each retry, the total time for a request to
time out is equal to seven times the base timeout value.
|
| lbSystemSmtProxyEvents |
.1.3.6.1.4.1.43.7.1.11.27 |
|
This object determines if the SMT proxy will generate
traps for SMT events occuring at other stations. If
enabled, the SMT proxy will generate traps for all SMT
events, those that occur locally, and those that occur
at other stations. If disabled, the SMT proxy will only
generate traps for events which occur locally. The
default value for this object is enabled(1).
|
| lbSlotEntry |
.1.3.6.1.4.1.43.7.1.12.1.1 |
|
A slot entry contains information common to a given
slot within a LinkBuilder system.
|
| lbFddiMacEntry |
.1.3.6.1.4.1.43.7.1.13.1.1 |
|
An FDDI MAC entry contains information common to a
particular FDDI MAC within the system.
|
| lbEthernetPortEntry |
.1.3.6.1.4.1.43.7.1.14.1.1 |
|
An ethernet port entry contains information common to a
particular ethernet port within the system.
|
| lbFddiPortEntry |
.1.3.6.1.4.1.43.7.1.15.1.1 |
|
A Port entry contains information common to a
particular FDDI port in the system.
|
| lbExpressEntry |
.1.3.6.1.4.1.43.7.1.16.1.1 |
|
An Express entry contains information common to a
particular Express function in a given system.
|
| lbExpressFddiPortEntry |
.1.3.6.1.4.1.43.7.1.17.1.1 |
|
A Port entry contains information for a particular
Express FDDI port in a given system.
|
| lbExpressEthernetPortEntry |
.1.3.6.1.4.1.43.7.1.18.1.1 |
|
An Expres ethernet port entry contains information
common to a particular Express ethernet port located
in the system.
|
| lbExpressEthernetPortAddressEntry |
.1.3.6.1.4.1.43.7.1.19.1.1 |
|
An entry contains information describing a remote Ethernet
MAC detected to be attached to an Express port.
|
| lbPowerSupplyEntry |
.1.3.6.1.4.1.43.7.1.20.1.1 |
|
A power supply entry contains information common for
a particular power supply unit in the system.
|
| lbBridgeEntry |
.1.3.6.1.4.1.43.7.1.21.1.1 |
|
A bridge entry contains information common to a
particular bridge function in a given system.
|
| lbBridgePortEntry |
.1.3.6.1.4.1.43.7.1.21.2.1 |
|
A Port entry contains information for a particular
bridge port in a given system.
|
| lbBridgePortForwardedToEntry |
.1.3.6.1.4.1.43.7.1.21.3.1 |
|
A bridge port forwarded-to entry contains information on the
count of frames forwarded from the receiving port indicated
by the corresponding lbBridgePortForwardedToReceivePortIndex,
to the destination port indicated by the corresponding
lbBridgePortForwardedToDstPortIndex. Note that no entries
exist which are indexed with the same values for both the
lbBridgePortForwardedToReceivePortIndex and the
lbBridgePortForwardedToDstPortIndex objects.
|
| lbBridgePortFilteredToEntry |
.1.3.6.1.4.1.43.7.1.21.4.1 |
|
A bridge port filtered-to entry contains information on the
count of frames filtered from the receiving port indicated
by the corresponding lbBridgePortFilteredToReceivePortIndex,
to the destination port indicated by the corresponding
lbBridgePortFilteredToDstPortIndex. Note that no entries
exist which are indexed with the same values for both the
lbBridgePortFilteredToReceivePortIndex and the
lbBridgePortFilteredToDstPortIndex objects.
|
| lbBridgePortAddressEntry |
.1.3.6.1.4.1.43.7.1.21.5.1 |
|
An bridge port address entry contains information about
particular bridge port address in a given system.
|
| lbTrapEnterpriseTableEntry |
.1.3.6.1.4.1.43.7.1.22.1.1 |
|
Information relating a specific trap enterprise OID with
a trap enterprise index.
|
| lbTrapDestTableEntry |
.1.3.6.1.4.1.43.7.1.23.1.1 |
|
Information relating a trap with a destination address
to which the trap will be sent when it is generated.
|
| slotIndex |
.1.3.6.1.4.1.43.7.1.2.1.1.1 |
|
The physical slot number of this slot
within the LinkBuilder 3GH chassis.
|
| slotBoardType |
.1.3.6.1.4.1.43.7.1.2.1.1.2 |
|
The type of board residing in this
slot.
|
| slotBoardRevision |
.1.3.6.1.4.1.43.7.1.2.1.1.3 |
|
The revision number of the board in
this slot.
|
| slotBoardStatus |
.1.3.6.1.4.1.43.7.1.2.1.1.4 |
|
The status of the board in this slot.
|
| slotBoardName |
.1.3.6.1.4.1.43.7.1.2.1.1.5 |
|
The text string describing this board
type.
|
| slotBoardNameAbbrev |
.1.3.6.1.4.1.43.7.1.2.1.1.6 |
|
The abbreviation describing this board
type.
|
| slotBoardAction |
.1.3.6.1.4.1.43.7.1.2.1.1.7 |
|
This object, when read, always returns
the value other (1). The result of
setting this object to each acceptable
value is:
runDiagnostics: runs the board's
offline diagnostics.
|
| smmSlotIndex |
.1.3.6.1.4.1.43.7.1.3.1.1.1 |
|
The physical slot number of this slot
within the LinkBuilder 3GH chassis.
|
| smmEthernetPortCount |
.1.3.6.1.4.1.43.7.1.3.1.1.2 |
|
The number of Ethernet ports on this
board.
|
| smmBaseEthernetPortIndex |
.1.3.6.1.4.1.43.7.1.3.1.1.3 |
|
The system-wide index for the first
Ethernet port on this board.
|
| fbcmSlotIndex |
.1.3.6.1.4.1.43.7.1.4.1.1.1 |
|
The physical slot number of this slot
within the LinkBuilder 3GH chassis.
|
| fbcmMACCount |
.1.3.6.1.4.1.43.7.1.4.1.1.2 |
|
The number of FDDI MACs present on
this board.
|
| fbcmBaseMACIndex |
.1.3.6.1.4.1.43.7.1.4.1.1.3 |
|
The system-wide index of the first FDDI
MAC on this board. Additional MACs on
this board will have consecutively
increasing MAC indices following
this index.
|
| fbcmPortCount |
.1.3.6.1.4.1.43.7.1.4.1.1.4 |
|
The number of FDDI ports present on
this board.
|
| fbcmBasePortIndex |
.1.3.6.1.4.1.43.7.1.4.1.1.5 |
|
The system-wide index of the first FDDI
port on this board. Additional ports on
this board will have consecutively
increasing port indices following
this index.
|
| fcmSlotIndex |
.1.3.6.1.4.1.43.7.1.5.1.1.1 |
|
The physical slot number of this slot
within the LinkBuilder 3GH chassis.
|
| fcmPortCount |
.1.3.6.1.4.1.43.7.1.5.1.1.2 |
|
The number of FDDI ports present on
this board.
|
| fcmBasePortIndex |
.1.3.6.1.4.1.43.7.1.5.1.1.3 |
|
The system-wide index of the first
FDDI port on this board. Additional
ports on this board will have
consecutively increasing port indices
following this index.
|
| portSlotIndex |
.1.3.6.1.4.1.43.7.1.6.1.1.1 |
|
The physical slot number of this slot
within the LinkBuilder 3GH chassis.
|
| portIndex |
.1.3.6.1.4.1.43.7.1.6.1.1.2 |
|
The index of the port on a particular
slot.
|
| portLabel |
.1.3.6.1.4.1.43.7.1.6.1.1.3 |
|
An ASCII text string describing this
port.
|
| elmSlotIndex |
.1.3.6.1.4.1.43.7.1.7.1.1.1 |
|
The physical slot number of this slot
within the LinkBuilder 3GH chassis.
|
| elmFddiMACCount |
.1.3.6.1.4.1.43.7.1.7.1.1.2 |
|
The number of FDDI MACs present on
this board.
|
| elmBaseFddiMACIndex |
.1.3.6.1.4.1.43.7.1.7.1.1.3 |
|
The system-wide index of the first
FDDI MAC on this board. Additional ports
on this board will have consecutively
increasing port indices following
this index.
|
| elmEthernetPortCount |
.1.3.6.1.4.1.43.7.1.7.1.1.4 |
|
The number of Ethernet ports present
on this board.
|
| elmBaseEthernetPortIndex |
.1.3.6.1.4.1.43.7.1.7.1.1.5 |
|
The system-wide index of the first
Ethernet port on this board. Additional
ports on this board will have
consecutively increasing port indices
following this index.
|
| elmAddressThreshold |
.1.3.6.1.4.1.43.7.1.7.1.1.6 |
|
A reporting threshold for the total
number of Ethernet addresses known for
this board. When the threshold is
reached, the event elmAddress-
ThresholdEvent is generated.
|
| elmFddiSlotIndex |
.1.3.6.1.4.1.43.7.1.8.1.1.1 |
|
The physical slot number of
this board.
|
| elmFddiMACIndex |
.1.3.6.1.4.1.43.7.1.8.1.1.2 |
|
A unique value for each FDDI MAC
on this board.
|
| elmFddiMACForwardedCts |
.1.3.6.1.4.1.43.7.1.8.1.1.3 |
|
A counter indicating the number of
frames forwarded by a MAC from an
Ethernet port to the FDDI network.
|
| elmFddiMACDroppedCts |
.1.3.6.1.4.1.43.7.1.8.1.1.4 |
|
A counter indicating the number of
frames that were dropped by a MAC
due to local resource limitation or
unknown destination MAC address.
|
| elmEthernetPortSlotIndex |
.1.3.6.1.4.1.43.7.1.9.1.1.1 |
|
The physical slot number of the slot
containing this port within the
LinkBuilder 3GH chassis.
|
| elmEthernetPortIndex |
.1.3.6.1.4.1.43.7.1.9.1.1.2 |
|
The index of the port on a particular
ELM board. This index ranges from 1 to
elmEthernetPortCount.
|
| elmEthernetPortLabel |
.1.3.6.1.4.1.43.7.1.9.1.1.3 |
|
An ASCII text string describing this
Ethernet port.
|
| elmEthernetPortForwardedCts |
.1.3.6.1.4.1.43.7.1.9.1.1.4 |
|
A counter indicating the number of
frames forwarded from this Ethernet
port onto the FDDI network.
|
| elmEthernetPortDroppedCts |
.1.3.6.1.4.1.43.7.1.9.1.1.5 |
|
A counter indicating the numer of
frames received on this port that were
dropped because the destination MAC
address was determined to be on the
same Ethernet segment as the source
MAC address.
|
| elmEthernetPortUTurnCts |
.1.3.6.1.4.1.43.7.1.9.1.1.6 |
|
A counter indicating the number of
frames received on this Ethernet port
and directed to another Ethernet port.
|
| elmEthernetPortState |
.1.3.6.1.4.1.43.7.1.9.1.1.7 |
|
The state of the Ethernet LAN port.
This value can be set to enable or
disable the Ethernet LAN port.
|
| elmEthernetPortAction |
.1.3.6.1.4.1.43.7.1.9.1.1.8 |
|
This object, when read, always returns
the value other (1). The result of
setting this object to each acceptable
value is:
freezeAddress: causes all the
learned dynamic addresses to be
converted into static addresses.
flushAddress: causes all the
addresses to be flushed from a
port's address list.
flushDynamicAddress: causes all
a port's dynamic addresses
to be flushed from the port's
address list.
|
| elmEthernetMACAddressSlotIndex |
.1.3.6.1.4.1.43.7.1.10.1.1.1 |
|
The physical slot number of the slot
containing this ELM within the
within th LinkBuilder 3GH chassis.
|
| elmEthernetMACAddressPortIndex |
.1.3.6.1.4.1.43.7.1.10.1.1.2 |
|
The port index of this address entry
within the table. This index ranges
from 1 to elmEthernetPortCount.
|
| elmEthernetMACAddressIndex |
.1.3.6.1.4.1.43.7.1.10.1.1.3 |
|
The index of this address entry
within the table.
|
| elmEthernetMACAddressType |
.1.3.6.1.4.1.43.7.1.10.1.1.4 |
|
This object, when read, always returns
the value other (1). Setting this object
to invalid (2) removes the corresponding
address entry from the table.
|
| elmEthernetMACAddressRemoteAddress |
.1.3.6.1.4.1.43.7.1.10.1.1.5 |
|
The remote MAC address detected on this
Ethernet LAN port.
|
| elmEthernetMACAddressIsStatic |
.1.3.6.1.4.1.43.7.1.10.1.1.6 |
|
A value indicating whether this MAC
address was statically configured or
dynamically learned on this port.
|
| elmEthernetMACAddressStaticPort |
.1.3.6.1.4.1.43.7.1.10.1.1.7 |
|
If the object elmEthernetMACAddress-
IsStatic has value isStatic(1), this
object indicates the port for which
this MAC address was statically
configured.
|
| elmEthernetMACAddressAge |
.1.3.6.1.4.1.43.7.1.10.1.1.8 |
|
This object indicates the time elapsed
since this MAC address was added to this
port's address table.
|
| lbSlotIndex |
.1.3.6.1.4.1.43.7.1.12.1.1.1 |
|
The physical slot number of this slot within the
system.
|
| lbSlotBoardType |
.1.3.6.1.4.1.43.7.1.12.1.1.2 |
|
The type of board residing in this slot.
|
| lbSlotBoardRevision |
.1.3.6.1.4.1.43.7.1.12.1.1.3 |
|
The revision number of the board in this slot.
|
| lbSlotBoardStatus |
.1.3.6.1.4.1.43.7.1.12.1.1.4 |
|
The status of the board in this slot.
|
| lbSlotBoardName |
.1.3.6.1.4.1.43.7.1.12.1.1.5 |
|
The text string describing this board.
|
| lbSlotBoardNameAbbrev |
.1.3.6.1.4.1.43.7.1.12.1.1.6 |
|
The abbreviation used to describe this board.
|
| lbSlotFddiMacCount |
.1.3.6.1.4.1.43.7.1.12.1.1.7 |
|
The number of FDDI MAC's present in this slot.
|
| lbSlotFddiMacBaseIndex |
.1.3.6.1.4.1.43.7.1.12.1.1.8 |
|
The index of the first FDDI MAC in this slot.
|
| lbSlotFddiPortCount |
.1.3.6.1.4.1.43.7.1.12.1.1.9 |
|
The number of FDDI ports present in this slot.
|
| lbSlotFddiPortBaseIndex |
.1.3.6.1.4.1.43.7.1.12.1.1.10 |
|
The index of the first FDDI port in this slot.
|
| lbSlotEthernetPortCount |
.1.3.6.1.4.1.43.7.1.12.1.1.11 |
|
The number of ethernet ports present in this slot.
|
| lbSlotEthernetPortBaseIndex |
.1.3.6.1.4.1.43.7.1.12.1.1.12 |
|
The index of the first ethernet port in this slot.
|
| lbSlotExpressFunctionCount |
.1.3.6.1.4.1.43.7.1.12.1.1.13 |
|
The number of Express functions present in this slot.
|
| lbSlotExpressFunctionBaseIndex |
.1.3.6.1.4.1.43.7.1.12.1.1.14 |
|
The index of the first Express function in this slot.
|
| lbSlotExpressFddiPortCount |
.1.3.6.1.4.1.43.7.1.12.1.1.15 |
|
The number of Express FDDI ports present in this slot.
|
| lbSlotExpressFddiPortBaseIndex |
.1.3.6.1.4.1.43.7.1.12.1.1.16 |
|
The index of the first Express FDDI port in this slot.
|
| lbSlotExpressEthernetPortCount |
.1.3.6.1.4.1.43.7.1.12.1.1.17 |
|
The number of Express ethernet ports present
in this slot.
|
| lbSlotExpressEthernetPortBaseIndex |
.1.3.6.1.4.1.43.7.1.12.1.1.18 |
|
The index of the first Express ethernet port
in this slot.
|
| lbSlotBoardAction |
.1.3.6.1.4.1.43.7.1.12.1.1.19 |
|
This object, when read, always returns the
value other (1). The behavior of setting this object
to each of the acceptable values is as follows:
runDiagnostics: runs the board's offline diagnostics.
|
| lbSlotBridgeFunctionCount |
.1.3.6.1.4.1.43.7.1.12.1.1.20 |
|
The number of bridge functions present in this slot.
|
| lbSlotBridgeFunctionBaseIndex |
.1.3.6.1.4.1.43.7.1.12.1.1.21 |
|
The index of the first bridge function in this slot.
|
| lbFddiMacIndex |
.1.3.6.1.4.1.43.7.1.13.1.1.1 |
|
A unique value for each FDDI MAC in the system.
The MAC identified by a particular value of this
index is the same MAC as identified by the same
value of ifIndex.
|
| lbFddiMacSlotIndex |
.1.3.6.1.4.1.43.7.1.13.1.1.2 |
|
The slot number corresponding to the physical location
of this MAC.
|
| lbFddiMacLocalIndex |
.1.3.6.1.4.1.43.7.1.13.1.1.3 |
|
The index of this MAC relative to the slot on which it
is physically present.
|
| lbFddiMacByteReceiveRate |
.1.3.6.1.4.1.43.7.1.13.1.1.4 |
|
The average number of bytes received per second by this
MAC during the most recent sampling period.
|
| lbFddiMacPeakByteReceiveRate |
.1.3.6.1.4.1.43.7.1.13.1.1.5 |
|
The peak value of lbFddiMacByteReceiveRate for
this MAC since the system was last initialized.
|
| lbFddiMacFrameReceiveRate |
.1.3.6.1.4.1.43.7.1.13.1.1.6 |
|
The average number of frames received per second by this
MAC during the most recent sampling period.
|
| lbFddiMacPeakFrameReceiveRate |
.1.3.6.1.4.1.43.7.1.13.1.1.7 |
|
The peak value of lbFddiMacFrameReceiveRate for
this MAC since the system was last initialized.
|
| lbFddiMacByteTransmitRate |
.1.3.6.1.4.1.43.7.1.13.1.1.8 |
|
The average number of bytes transmitted per second by
this MAC during the most recent sampling period.
|
| lbFddiMacPeakByteTransmitRate |
.1.3.6.1.4.1.43.7.1.13.1.1.9 |
|
The peak value of lbFddiMacByteTransmitRate for
this MAC since the system was last initialized.
|
| lbFddiMacFrameTransmitRate |
.1.3.6.1.4.1.43.7.1.13.1.1.10 |
|
The average number of frames transmitted per second by
this MAC during the most recent sampling period.
|
| lbFddiMacPeakFrameTransmitRate |
.1.3.6.1.4.1.43.7.1.13.1.1.11 |
|
The peak value of lbFddiMacFrameTransmitRate for
this MAC since the system was last initialized.
|
| lbFddiMacReceiveMulticastThreshold |
.1.3.6.1.4.1.43.7.1.13.1.1.12 |
|
The maximum number of multicast frames per second
that can be received in the sample interval. The
sample interval is one second. The default value
for this object is zero which implies an infinite rate.
|
| lbFddiMacBeaconHistory |
.1.3.6.1.4.1.43.7.1.13.1.1.13 |
|
This object gives a history of the most recent beacon
information received on this MAC. It can contain up to
a maximum of eight records. Each record is of the form:
source MAC: 6 bytes
beacon data length: 2 bytes.
beacon data: 0-16 bytes.
|
| lbEthernetPortIndex |
.1.3.6.1.4.1.43.7.1.14.1.1.1 |
|
A unique value for each ethernet port in the system.
The port identified by a particular value of this
index is the same port as identified by the same
value of ifIndex.
|
| lbEthernetPortSlotIndex |
.1.3.6.1.4.1.43.7.1.14.1.1.2 |
|
The slot number corresponding to the physical location
of this port.
|
| lbEthernetPortLocalIndex |
.1.3.6.1.4.1.43.7.1.14.1.1.3 |
|
The index of this port relative to the slot on which it
is physically present.
|
| lbEthernetPortLabel |
.1.3.6.1.4.1.43.7.1.14.1.1.4 |
|
An ASCII text string describing this port.
|
| lbEthernetPortChipsetType |
.1.3.6.1.4.1.43.7.1.14.1.1.5 |
|
The type of chipset used to implement this port.
|
| lbEthernetPortLinkStatus |
.1.3.6.1.4.1.43.7.1.14.1.1.6 |
|
The current value of the link status for this port.
|
| lbEthernetPortByteReceiveRate |
.1.3.6.1.4.1.43.7.1.14.1.1.7 |
|
The average number of bytes received per second by this
port during the most recent sampling period.
|
| lbEthernetPortPeakByteReceiveRate |
.1.3.6.1.4.1.43.7.1.14.1.1.8 |
|
The peak value of lbEthernetPortByteReceiveRate for
this port since the system was last initialized.
|
| lbEthernetPortFrameReceiveRate |
.1.3.6.1.4.1.43.7.1.14.1.1.9 |
|
The average number of frames received per second by this
port during the most recent sampling period.
|
| lbEthernetPortPeakFrameReceiveRate |
.1.3.6.1.4.1.43.7.1.14.1.1.10 |
|
The peak value of lbEthernetPortFrameReceiveRate for
this port since the system was last initialized.
|
| lbEthernetPortByteTransmitRate |
.1.3.6.1.4.1.43.7.1.14.1.1.11 |
|
The average number of bytes transmitted per second by
this port during the most recent sampling period.
|
| lbEthernetPortPeakByteTransmitRate |
.1.3.6.1.4.1.43.7.1.14.1.1.12 |
|
The peak value of lbEthernetPortByteTransmitRate for
this port since the system was last initialized.
|
| lbEthernetPortFrameTransmitRate |
.1.3.6.1.4.1.43.7.1.14.1.1.13 |
|
The average number of frames transmitted per second by
this port during the most recent sampling period.
|
| lbEthernetPortPeakFrameTransmitRate |
.1.3.6.1.4.1.43.7.1.14.1.1.14 |
|
The peak value of lbEthernetPortFrameTransmitRate for
this port since the system was last initialized.
|
| lbEthernetPortReceiveMulticastThreshold |
.1.3.6.1.4.1.43.7.1.14.1.1.15 |
|
The maximum number of multicast frames per second
that can be received in the sample interval. The
sample interval is one second. The default value
for this object is zero which implies an infinite rate.
|
| lbEthernetPortType |
.1.3.6.1.4.1.43.7.1.14.1.1.16 |
|
Specific description of this port's type.
|
| lbFddiPortIndex |
.1.3.6.1.4.1.43.7.1.15.1.1.1 |
|
A unique value for each FDDI port in the system.
It's value ranges between 1 and the value of
lbSystemFddiPortCount.
|
| lbFddiPortSlotIndex |
.1.3.6.1.4.1.43.7.1.15.1.1.2 |
|
The slot number corresponding to the physical location
of this port.
|
| lbFddiPortLocalIndex |
.1.3.6.1.4.1.43.7.1.15.1.1.3 |
|
The index of this port relative to the slot on which it
is physically present.
|
| lbFddiPortLabel |
.1.3.6.1.4.1.43.7.1.15.1.1.4 |
|
An ASCII text string describing this port.
|
| lbExpressIndex |
.1.3.6.1.4.1.43.7.1.16.1.1.1 |
|
A unique value for each Express function in the system.
It's value ranges between 1 and the value of
lbSystemExpressFunctionCount.
|
| lbExpressSlotIndex |
.1.3.6.1.4.1.43.7.1.16.1.1.2 |
|
The slot number corresponding to the physical location
of this function.
|
| lbExpressLocalIndex |
.1.3.6.1.4.1.43.7.1.16.1.1.3 |
|
The index of this function relative to the slot on which it
is physically present.
|
| lbExpressAddressThreshold |
.1.3.6.1.4.1.43.7.1.16.1.1.4 |
|
A reporting threshold for the total number of Ethernet
Addresses known for this board. When this threshold
is reached, the event lbEemAddressThresholdEvent is
generated.
|
| lbExpressFddiPortIndex |
.1.3.6.1.4.1.43.7.1.17.1.1.1 |
|
A unique value for each Express port in the system.
It's value ranges between 1 and the value of
lbSystemExpressFddiPortCount.
|
| lbExpressFddiPortSlotIndex |
.1.3.6.1.4.1.43.7.1.17.1.1.2 |
|
The slot number corresponding to the physical location
of this port.
|
| lbExpressFddiPortLocalIndex |
.1.3.6.1.4.1.43.7.1.17.1.1.3 |
|
The index of this port relative to the slot on which it
is physically present.
|
| lbExpressFddiPortForwardedCts |
.1.3.6.1.4.1.43.7.1.17.1.1.4 |
|
The number of frames forwarded by this MAC from
an ethernet port to the FDDI network.
|
| lbExpressFddiPortDroppedCts |
.1.3.6.1.4.1.43.7.1.17.1.1.5 |
|
The number of frames received by this MAC that
were not forwarded.
|
| lbExpressEthernetPortIndex |
.1.3.6.1.4.1.43.7.1.18.1.1.1 |
|
A unique value for each Express ethernet port in the
system. It's value ranges between 1 and the value of
lbSystemExpressEthernetPortCount.
|
| lbExpressEthernetPortSlotIndex |
.1.3.6.1.4.1.43.7.1.18.1.1.2 |
|
The slot number corresponding to the physical location
of this port.
|
| lbExpressEthernetPortLocalIndex |
.1.3.6.1.4.1.43.7.1.18.1.1.3 |
|
The index of this port relative to the slot on which it
is physically present.
|
| lbExpressEthernetPortForwardedCts |
.1.3.6.1.4.1.43.7.1.18.1.1.4 |
|
The number of frames forwarded from this ethernet
port to the FDDI network.
|
| lbExpressEthernetPortDroppedCts |
.1.3.6.1.4.1.43.7.1.18.1.1.5 |
|
The number of frames received by this ethernet
port that were not forwarded or u-turned.
|
| lbExpressEthernetPortUTurnCts |
.1.3.6.1.4.1.43.7.1.18.1.1.6 |
|
The number of frames received by this ethernet
port that were directed to another ethernet port.
|
| lbExpressEthernetPortAction |
.1.3.6.1.4.1.43.7.1.18.1.1.7 |
|
This object, when read, always returns the value other (1).
The behavior of setting this object to each of the
acceptable values is as follows:
freezeAddress: causes all the learned dynamic addresses
to be converted into static addresses.
flushAddress: causes all the addresses to be flushed
from a port's address list.
flushDynamicAddress:
causes all the port's dynamic addresses
to be flushed from a port's address list.
|
| lbExpressEthernetPortAddressPortIndex |
.1.3.6.1.4.1.43.7.1.19.1.1.1 |
|
A unique value for each Express ethernet port in the
system. It's value ranges between 1 and the value of
lbSystemExpressEthernetPortCount.
|
| lbExpressEthernetPortAddressIndex |
.1.3.6.1.4.1.43.7.1.19.1.1.2 |
|
The index of this address entry within the address table.
|
| lbExpressEthernetPortAddressSlotIndex |
.1.3.6.1.4.1.43.7.1.19.1.1.3 |
|
The slot number corresponding to the physical location
of this port.
|
| lbExpressEthernetPortAddressType |
.1.3.6.1.4.1.43.7.1.19.1.1.4 |
|
This object, when read, always returns the value other (1).
Setting this object to invalid (2) will remove the
corresponding address entry from the table.
|
| lbExpressEthernetPortAddressRemoteAddress |
.1.3.6.1.4.1.43.7.1.19.1.1.5 |
|
The remote MAC address detected on this port.
|
| lbExpressEthernetPortAddressIsStatic |
.1.3.6.1.4.1.43.7.1.19.1.1.6 |
|
A value indicating whether this MAC address was statically
configured or was dynamically learned on this port.
|
| lbExpressEthernetPortAddressStaticPort |
.1.3.6.1.4.1.43.7.1.19.1.1.7 |
|
If the object lbExpressEthernetPortAddressIsStatic has
value isStatic(1), this object indicates the port for
which this MAC address was statically configured.
|
| lbExpressEthernetPortAddressAge |
.1.3.6.1.4.1.43.7.1.19.1.1.8 |
|
This object indicates the time, in seconds, elapsed since
this MAC address was added to this port's address table.
|
| lbPowerSupplyIndex |
.1.3.6.1.4.1.43.7.1.20.1.1.1 |
|
A unique value for each power supply in the system.
It's value ranges between 1 and the value of
lbSystemPowerSupplyCount.
|
| lbPowerSupplyLocation |
.1.3.6.1.4.1.43.7.1.20.1.1.2 |
|
The physical slot in which this power supply unit
resides in the system.
|
| lbPowerSupplyStatus |
.1.3.6.1.4.1.43.7.1.20.1.1.3 |
|
The status of the power supply. A value of 0 indicates
a working unit. A non-zero value represents a bit mask of
the possible failure types. Each set bit indicates the
following failure type:
bit0: systemAcFailure
bit1: systemPlus5Failure
bit2: systemPlus12Failure
bit3: systemOverTemperatureFailure.
|
| lbPowerSupplyFailureType |
.1.3.6.1.4.1.43.7.1.20.1.1.4 |
|
This object is sent in the varlist when the
lbPowerSupplyFailureEvent trap is generated. It
indicates the particular failure type that caused
this trap to be generated.
|
| lbPowerSupplyLastFailure |
.1.3.6.1.4.1.43.7.1.20.1.1.5 |
|
This object represents the most recent power
supply failure type. If no failure has occured,
the value of this object is none. This object is
included in the varlist when the lbPowerSupplyFailureEvent
trap is generated. It indicates the failure type that
caused the trap to be generated.
|
| lbBridgeIndex |
.1.3.6.1.4.1.43.7.1.21.1.1.1 |
|
A unique value for each bridge function in the system.
It's value ranges between 1 and the value of
lbSystemBridgeFunctionCount.
|
| lbBridgeBaseSlotIndex |
.1.3.6.1.4.1.43.7.1.21.1.1.2 |
|
The slot number of the lowest numbered slot which
contains a physical port that this bridge function
controls.
|
| lbBridgePortCount |
.1.3.6.1.4.1.43.7.1.21.1.1.3 |
|
The number of ports that this bridge function controls.
|
| lbBridgeAddressTableSize |
.1.3.6.1.4.1.43.7.1.21.1.1.4 |
|
The size of the address table for this bridge function.
|
| lbBridgeAddressThreshold |
.1.3.6.1.4.1.43.7.1.21.1.1.5 |
|
A reporting threshold for the total number of
addresses known for this board. When this threshold
is reached, the event lbBridgeAddressThresholdEvent is
generated. The range of valid values for setting this
object is between 1 and the value reported by
lbBridgeAddressTableSize + 1 (Note that this range
applies to values issued in set requests. The current
value may be outside this range, for example if the value
of lbBridgeMode is changed). Setting this object to one
greater than the address table size disables the generation
of lbBridgeAddressThresholdEvents since the limit will
never be reached.
|
| lbBridgeMode |
.1.3.6.1.4.1.43.7.1.21.1.1.6 |
|
The operational mode of this bridge function. Note that
bridges which report notSupported(3) will not support sets
of this object, and that the value notSupported(3) is not
a valid value for a set operation.
|
| lbBridgeLocalIndex |
.1.3.6.1.4.1.43.7.1.21.1.1.7 |
|
The index of this bridge function relative to the slot
on which it is physically present.
|
| lbBridgePortBridgeIndex |
.1.3.6.1.4.1.43.7.1.21.2.1.1 |
|
A unique value for each bridge function in the system.
It's value ranges between 1 and the value of
lbSystemBridgeFunctionCount.
|
| lbBridgePortIndex |
.1.3.6.1.4.1.43.7.1.21.2.1.2 |
|
A unique value for each bridge port controlled by a given
bridge function. It's value ranges between 1 and the
value of lbBridgePortCount for the bridge function
which this entry references.
|
| lbBridgePortSlotIndex |
.1.3.6.1.4.1.43.7.1.21.2.1.3 |
|
The slot number corresponding to the physical location
of this port.
|
| lbBridgePortLocalIndex |
.1.3.6.1.4.1.43.7.1.21.2.1.4 |
|
The index of this port relative to the slot on which it
is physically present and its port type. For example
FDDI ports in a slot are identified with local indices from
1 to the number of FDDI ports in that slot, and the Ethernet
ports in the same slot are identified with local indices from
1 to the number of Ethernet ports in that slot.
|
| lbBridgePortType |
.1.3.6.1.4.1.43.7.1.21.2.1.5 |
|
The type of this port.
|
| lbBridgePortIpFragmentationEnabled |
.1.3.6.1.4.1.43.7.1.21.2.1.6 |
|
A flag indicating whether or not IP fragmentation is
enabled on this bridge port. Note that bridges which
report notSupported(3) will not support sets of this
object, and that the value notSupported(3) is not
a valid value for a set operation.
|
| lbBridgePortReceiveMulticastLimit |
.1.3.6.1.4.1.43.7.1.21.2.1.7 |
|
The maximum number of multicast frames per second
that can be received in the sample interval. The
sample interval is four seconds. The default value
for this object is zero which implies an infinite rate.
|
| lbBridgePortAddressAction |
.1.3.6.1.4.1.43.7.1.21.2.1.8 |
|
This object, when read, always returns the value other (1).
The behavior of setting this object to each of the
acceptable values is as follows:
freezeAddress: causes all the learned dynamic addresses
to be converted into static addresses.
flushAddress: causes all the addresses to be flushed
from the port's address list.
flushDynamicAddress:
causes all dynamic addresses to be
flushed from the port's address list.
|
| lbBridgePortTotalForwardedCts |
.1.3.6.1.4.1.43.7.1.21.2.1.9 |
|
The total number of frames forwarded from this port to
all other ports of this bridge. Note that the total forwarded
count is NOT equal to the receive count minus the discard
count, as a single received multicast/broadcast frame can
be forwarded to multiple bridge ports. Also frames which
are 'flooded' because of unknown destination addresses
account for multiple forwarding as well. The total
forwarding count is the instantaneous sumation of the
'forwarded to' counts to all other ports of the bridge.
|
| lbBridgePortManagementFramesReceived |
.1.3.6.1.4.1.43.7.1.21.2.1.10 |
|
The number of bridge management frames received by this
port.
|
| lbBridgePortTotalDiscards |
.1.3.6.1.4.1.43.7.1.21.2.1.11 |
|
The total number of frames discarded by this port.
|
| lbBridgePortReceiveBlockedDiscards |
.1.3.6.1.4.1.43.7.1.21.2.1.12 |
|
The number of frames discarded by this port because the
the receiving bridge port was not in the 'forwarding'
state.
|
| lbBridgePortReceiveMulticastLimitExceededs |
.1.3.6.1.4.1.43.7.1.21.2.1.13 |
|
The number of multicast/broadcast frames discarded by
this port because the lbBridgePortReceiveMulticastLimit
was exceeded.
|
| lbBridgePortReceiveSecurityDiscards |
.1.3.6.1.4.1.43.7.1.21.2.1.14 |
|
The number of frames discarded by this port because they
contained source addresses which were statically configured
on another bridge port. A statically configured address
(station), which is not allowed to move, appears to have
moved.
|
| lbBridgePortReceiveUnknownDiscards |
.1.3.6.1.4.1.43.7.1.21.2.1.15 |
|
The number of frames discarded by this port because the
destination address was unknown. Note that this counter
is only valid for FDDI ports, and only when the bridge is an
EEM, or an ESM operating in express mode.
|
| lbBridgePortReceiveOtherDiscards |
.1.3.6.1.4.1.43.7.1.21.2.1.16 |
|
The number of frames discarded by this port because they
contained either invalid (group) source addresses or
source addresses belonging to this bridge (indicative of
network loops).
|
| lbBridgePortReceiveErrorDiscards |
.1.3.6.1.4.1.43.7.1.21.2.1.17 |
|
The number of frames discarded by this port because of
internal bridge system errors (e.g., hardware and
software address table discrepencies).
|
| lbBridgePortSameSegmentDiscards |
.1.3.6.1.4.1.43.7.1.21.2.1.18 |
|
The number of frames discarded by this port because the
destination address is known on the same network segment
as the source address, i.e., the frame does not need to
be bridged.
|
| lbBridgePortTransmitBlockedDiscards |
.1.3.6.1.4.1.43.7.1.21.2.1.19 |
|
The number of frames discarded by this port because the
the transmitting bridge port was not in the 'forwarding'
state.
|
| lbBridgePortTotalFiltered |
.1.3.6.1.4.1.43.7.1.21.2.1.20 |
|
The total number of frames discarded by this port due to
user defined filters.
|
| lbBridgePortReceiveUnicastFiltered |
.1.3.6.1.4.1.43.7.1.21.2.1.21 |
|
The number of frames discarded by this port due to user
defined receive path filters.
|
| lbBridgePortReceiveMulticastFiltered |
.1.3.6.1.4.1.43.7.1.21.2.1.22 |
|
The number of frames discarded by this port due to user
defined receive multicast path filters.
|
| lbBridgePortTransmitUnicastFiltered |
.1.3.6.1.4.1.43.7.1.21.2.1.23 |
|
The number of frames discarded by this port due to user
defined transmit path filters.
|
| lbBridgePortTransmitMulticastFiltered |
.1.3.6.1.4.1.43.7.1.21.2.1.24 |
|
The number of frames discarded by this port due to user
defined transmit multicast path filters.
|
| lbBridgePortReceiveMulticastLimitExceededCount |
.1.3.6.1.4.1.43.7.1.21.2.1.25 |
|
The number of times the lbBridgePortReceiveMulticastLimit was
exceeded.
|
| lbBridgePortForwardedToBridgeIndex |
.1.3.6.1.4.1.43.7.1.21.3.1.1 |
|
A unique value for each bridge function in the system.
It's value ranges between 1 and the value of
lbSystemBridgeFunctionCount.
|
| lbBridgePortForwardedToReceivePortIndex |
.1.3.6.1.4.1.43.7.1.21.3.1.2 |
|
A unique value for each bridge port controlled by a given
bridge function. It's value ranges between 1 and the
value of lbBridgePortCount for the bridge function
which this entry references. This port index refers to the
receiving port which is forwarding frames.
|
| lbBridgePortForwardedToDstPortIndex |
.1.3.6.1.4.1.43.7.1.21.3.1.3 |
|
A unique value for each bridge port controlled by a given
bridge function. It's value ranges between 1 and the
value of lbBridgePortCount for the bridge function
which this entry references. This port index refers to
the destination port to which frames are being forwarded.
|
| lbBridgePortForwardedToCount |
.1.3.6.1.4.1.43.7.1.21.3.1.4 |
|
The count of frames forwarded from the receiving port to
the destination port.
|
| lbBridgePortFilteredToBridgeIndex |
.1.3.6.1.4.1.43.7.1.21.4.1.1 |
|
A unique value for each bridge function in the system.
It's value ranges between 1 and the value of
lbSystemBridgeFunctionCount.
|
| lbBridgePortFilteredToReceivePortIndex |
.1.3.6.1.4.1.43.7.1.21.4.1.2 |
|
A unique value for each bridge port controlled by a given
bridge function. It's value ranges between 1 and the
value of lbBridgePortCount for the bridge function
which this entry references. This port index refers to the
receiving port which is filtering frames.
|
| lbBridgePortFilteredToDstPortIndex |
.1.3.6.1.4.1.43.7.1.21.4.1.3 |
|
A unique value for each bridge port controlled by a given
bridge function. It's value ranges between 1 and the
value of lbBridgePortCount for the bridge function
which this entry references. This port index refers to
the destination port to which frames are being filtered.
|
| lbBridgePortFilteredToCount |
.1.3.6.1.4.1.43.7.1.21.4.1.4 |
|
The count of frames filtered from the receiving port to
the destination port.
|
| lbBridgePortAddressBridgeIndex |
.1.3.6.1.4.1.43.7.1.21.5.1.1 |
|
A unique value for each bridge function in the system.
It's value ranges between 1 and the value of
lbSystemBridgeFunctionCount.
|
| lbBridgePortAddressPortIndex |
.1.3.6.1.4.1.43.7.1.21.5.1.2 |
|
A unique value for each bridge port controlled by a given
bridge function. It's value ranges between 1 and the
value of lbBridgePortCount for the bridge function
which this entry references.
|
| lbBridgePortAddressIndex |
.1.3.6.1.4.1.43.7.1.21.5.1.3 |
|
The index of this address entry within the bridge address
table.
|
| lbBridgePortAddressRemoteAddress |
.1.3.6.1.4.1.43.7.1.21.5.1.4 |
|
The remote MAC address detected on the port corresponding
to this entry. Setting this object attempts to create a
new entry in the table. Since the value of
lbBridgePortAddressIndex is determined automatically internal
to the bridge, a set is only successful if the index value
specified for lbBridgePortAddressIndex is zero. A get-next
using the values of lbBridgePortAddressBridgeIndex and
lbBridgePortAddressPortIndex can be used to determine the
address index assigned to the newly added address entry.
|
| lbBridgePortAddressType |
.1.3.6.1.4.1.43.7.1.21.5.1.5 |
|
This object, when read, always returns the value other (1).
Setting this object to invalid (2) will remove the
corresponding address entry from the table.
|
| lbBridgePortAddressIsStatic |
.1.3.6.1.4.1.43.7.1.21.5.1.6 |
|
A value indicating whether this MAC address was statically
configured or was dynamically learned.
|
| lbBridgePortAddressStaticPort |
.1.3.6.1.4.1.43.7.1.21.5.1.7 |
|
If the object lbBridgePortAddressIsStatic has
value isStatic(1), this object indicates the local port
index (as reported by lbBridgePortLocalIndex) for
which this MAC address was statically configured. If
the object lbBridgePortAddressIsStatic has the value
isDynamic(2), the value of this object is 0.
|
| lbBridgePortAddressAge |
.1.3.6.1.4.1.43.7.1.21.5.1.8 |
|
This object indicates the time, in seconds, elapsed since
a packet containing this address as a source was last seen
on the port corresponding to this entry.
|
| lbTrapEnterpriseIndex |
.1.3.6.1.4.1.43.7.1.22.1.1.1 |
|
A unique index corresponding to a particular enterprise
OID under which traps are defined. This value of this
object corresponding to a particular enterprise OID will
remain constant accross system resets.
|
| lbTrapEnterpriseOID |
.1.3.6.1.4.1.43.7.1.22.1.1.2 |
|
An enterpise OID under which traps are defined.
|
| lbTrapDestAddr |
.1.3.6.1.4.1.43.7.1.23.1.1.1 |
|
The network address to which the trap identified by
this entry is to be transmitted.
|
| lbTrapDestEnterpriseIndex |
.1.3.6.1.4.1.43.7.1.23.1.1.2 |
|
The enterprise index of the enterprise identified in this
entry. The value of this object is the same as the
lbTrapEnterpriseIndex value for a given enterprise.
|
| lbTrapNumber |
.1.3.6.1.4.1.43.7.1.23.1.1.3 |
|
The number of the trap within the corresponding
enterprise for this entry.
|
| lbTrapEntryStatus |
.1.3.6.1.4.1.43.7.1.23.1.1.4 |
|
The status of the trap destination table entry. Setting
this object to valid has the effect of attempting to add
the row corresponding to the instance specified. If the
instance already exists, the set is successful (with no
new entry added). If the instance specified is invalid,
the set fails, otherwise the set succeeds and results in
a new entry being added to the table. Setting this object
to invalid has the effect of removing the corresponding
entry from the table.
|
