| lbOptSMTIndex |
.1.3.6.1.4.1.43.7.2.1.1.1.1 |
|
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.
|
| lbOptSMTManufacturerOUI |
.1.3.6.1.4.1.43.7.2.1.1.1.2 |
|
The three octets of manufacturer data which make
up the manufacturerOUI component.
|
| lbOptSMTManufacturerData |
.1.3.6.1.4.1.43.7.2.1.1.1.3 |
|
The 29 octets of manufacturer data which make up the
manufacturerData component.
|
| lbOptSMTHoldState |
.1.3.6.1.4.1.43.7.2.1.1.1.4 |
|
This variable indicates the current state of the
Hold function. The value 'not-holding' is the
default and initial value. The value must be set
to 'not-holding' as part of Active_Actions and
when the conditions causing 'holding-prm' or
'holding-sec' are no longer true. The value
'holding-prm' must be set when the condition
(notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail
| TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is
satisfied in state PC8:ACTIVE for the A Port. The
value 'holding-sec' must be set when the condition
(notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail
| TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is
satisfied in state PC8:ACTIVE for the B Port.
|
| lbOptSMTSetCount |
.1.3.6.1.4.1.43.7.2.1.1.1.5 |
|
This variable is composed of a count incremented
in response to a Set operation on the MIB, and the
time of the change, however only the count is
reported here (refer to ANSI SMT 8.4.1).
|
| lbOptSMTLastSetStationId |
.1.3.6.1.4.1.43.7.2.1.1.1.6 |
|
The Station ID of the station that effected the last
change in the FDDI MIB.
|
| lbOptMACBridgeFunctionSMTIndex |
.1.3.6.1.4.1.43.7.2.2.1.1.1 |
|
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.
|
| lbOptMACBridgeFunctionMACIndex |
.1.3.6.1.4.1.43.7.2.2.1.1.2 |
|
Index variable for uniquely identifying the MAC
object instances.
|
| lbOptMACBridgeFunctions |
.1.3.6.1.4.1.43.7.2.2.1.1.3 |
|
Indicates the MAC's optional bridging functions.
The Value -1 is used to indicate that bridging is
not supported by this MAC.
The value is a sum. This value initially takes
the value zero, then for each function present, 2
raised to a power is added to the sum. The powers
are according to the following table:
Function Power
tb 0 -- Transparent bridging active
sr 1 -- Src routing active
srt 2 -- Src routing transparent active
|
| lbOptMACTPriSMTIndex |
.1.3.6.1.4.1.43.7.2.2.2.1.1 |
|
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.
|
| lbOptMACTPriMACIndex |
.1.3.6.1.4.1.43.7.2.2.2.1.2 |
|
Index variable for uniquely identifying the MAC
object instances.
|
| lbOptMACTPri0 |
.1.3.6.1.4.1.43.7.2.2.2.1.3 |
|
This attribute is an unsigned twos-complement T_pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
|
| lbOptMACTPri1 |
.1.3.6.1.4.1.43.7.2.2.2.1.4 |
|
This attribute is an unsigned twos-complement T_pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
|
| lbOptMACTPri2 |
.1.3.6.1.4.1.43.7.2.2.2.1.5 |
|
This attribute is an unsigned twos-complement T_pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
|
| lbOptMACTPri3 |
.1.3.6.1.4.1.43.7.2.2.2.1.6 |
|
This attribute is an unsigned twos-complement T_pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
|
| lbOptMACTPri4 |
.1.3.6.1.4.1.43.7.2.2.2.1.7 |
|
This attribute is an unsigned twos-complement T_pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
|
| lbOptMACTPri5 |
.1.3.6.1.4.1.43.7.2.2.2.1.8 |
|
This attribute is an unsigned twos-complement T_pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
|
| lbOptMACTPri6 |
.1.3.6.1.4.1.43.7.2.2.2.1.9 |
|
This attribute is an unsigned twos-complement T_pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
|
| lbOptPATHRingSMTIndex |
.1.3.6.1.4.1.43.7.2.3.1.1.1 |
|
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.
|
| lbOptPATHRingPATHIndex |
.1.3.6.1.4.1.43.7.2.3.1.1.2 |
|
Index variable for uniquely identifying the
primary, secondary and local PATH object
instances. Local PATH object instances are
represented with integer values 3 to 255.
|
| lbOptPATHRingLatency |
.1.3.6.1.4.1.43.7.2.3.1.1.3 |
|
Gives the total accumulated latency of the ring
associated with this path. May be measured directly
by the station or calculated by a management station.
Values of this object are reported in 1 ns units.
|
| lbOptPATHTraceStatus |
.1.3.6.1.4.1.43.7.2.3.1.1.4 |
|
This attribute indicates the current trace status of
the path.
The value is a sum which represents all of the trace
status information which applies. This value initially
takes the value zero, then for each condition which
applies, 2 raised to a power is added to the sum. the
powers are according to the following table:
TraceStatus Power
traceinitiated 0
tracepropragated 1
traceterminated 2
tracetimeout 3
|
| lbOptPATHT-Rmode |
.1.3.6.1.4.1.43.7.2.3.1.1.5 |
|
Used by RMT to limit the duration of restricted dialogs
on a path. This object is reported in 1 ns units.
|
| lbOptPATHSbaSMTIndex |
.1.3.6.1.4.1.43.7.2.3.2.1.1 |
|
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.
|
| lbOptPATHSbaPATHIndex |
.1.3.6.1.4.1.43.7.2.3.2.1.2 |
|
Index variable for uniquely identifying the
primary, secondary and local PATH object
instances. Local PATH object instances are
represented with integer values 3 to 255.
|
| lbOptPATHSbaPayload |
.1.3.6.1.4.1.43.7.2.3.2.1.3 |
|
The payload portion of the Synchronous Bandwidth
Allocation for thi path. This value represents the
maximum number of bytes of data allocated for
transmission per 125 microseconds.
|
| lbOptPATHSbaOverhead |
.1.3.6.1.4.1.43.7.2.3.2.1.4 |
|
The overhead portion of the Synchronous Bandwith
Allocation for this path. This value repersents the
maximum number of bytes overhead (token capture, frame
header, etc.) used pre negotiated Target Token Rotation
Time (T_neg).
|
| lbOptPATHSbaAvailable |
.1.3.6.1.4.1.43.7.2.3.2.1.5 |
|
This value is the maximum Synchronous Bandwith available
for a path in bytes per second.
|
| lbOptPORTSMTIndex |
.1.3.6.1.4.1.43.7.2.4.1.1.1 |
|
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.
|
| lbOptPORTIndex |
.1.3.6.1.4.1.43.7.2.4.1.1.2 |
|
Index variable for uniquely identifying the PORT
object instances.
|
| lbOptPORTMACLoopTime |
.1.3.6.1.4.1.43.7.2.4.1.1.3 |
|
This attribute controls the value used for T_Next(9)
(see 9.4.4.2.3). This object is reported in 1 ns
units.
|
| lbOptPORTEBErrorCt |
.1.3.6.1.4.1.43.7.2.4.1.1.4 |
|
A count that should as closely as possible match the
times an Elasticity Buffer Error has occurred while in
active line state.
|
| lbOptPORTLSSMTIndex |
.1.3.6.1.4.1.43.7.2.4.2.1.1 |
|
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.
|
| lbOptPORTLSPORTIndex |
.1.3.6.1.4.1.43.7.2.4.2.1.2 |
|
Index variable for uniquely identifying the PORT
object instances.
|
| lbOptPORTMaintLS |
.1.3.6.1.4.1.43.7.2.4.2.1.3 |
|
The PORT Maintenance Line State specifies the line state
(Maint_LS) to be transmitted when the PCM state machine
for the port is in state PC9 Maint.
|
| lbOptPORTPCLS |
.1.3.6.1.4.1.43.7.2.4.2.1.4 |
|
This attribute indicates the line state (PC_LS) received
by the port.
|
| lbOptSMTHoldCondition |
1 |
|
Generated when fddiSMTHoldState (fddimibSMTHoldState)
assumes the state holding-prm or holding-sec. This
notification is a Condition in the Status Report
Protocol (see 7.2.7 and 8.3).
|
| lbOptSMTPeerWrapCondition |
2 |
|
This condition is active when fddiSMTPeerWrapFlag
(fddimibSMTPeerWrapFlag) is set. This notification is
a Condition in the Status Report Protocol (see 7.2.7
and 8.3).
|
| lbOptMACDuplicateAddressCondition |
3 |
|
This condition is active when either fddiMACDA-Flag
(fddimibMACDaFlag) or fddiMACUNDA-Flag
(fddimibMACUnaDaFlag) is set. This event is handled
as a Condition in the Status Report Protocol (see 7.2.7
and 8.3).
|
| lbOptMACFrameErrorCondition |
4 |
|
Generated when the fddiMACFrameErrorRatio
(fddimibMACFrameErrorRatio) is greater than or equal
to fddiMACFrameErrorThreshold
(fddimibMACFrameErrorThreshold). This event is handled
as a Condition in the Status Report Protocol (see 7.2.7
and 8.3).
|
| lbOptMACNotCopiedCondition |
5 |
|
Generated when the fddiMACNotCopiedRatio
(fddimibMACNotCopiedRatio) is greater than or equal to
the fddiMACNotCopiedThreshold (lbOptMACNotCopiedThreshold).
This event is handled as a Condition in the Status Report
Protocol (see 7.2.7 and 8.3).
|
| lbOptMACNeighborChangeEvent |
6 |
|
Generated when a change in a MAC's upstream neighbor
address or downstream neighbor address is detected.
(see 7.2.7 and 8.3).
|
| lbOptMACPathChangeEvent |
7 |
|
This event is generated when the value of the
fddiMACCurrentPath (fddimibMACCurrentPath) changes.
This event shall be supressed if the value changes
from isolated to local or local to isolated (see
7.2.7 and 8.3).
|
| lbOptPORTLerCondition |
8 |
|
This condition becomes active when the value of
fddiPORTLer-Estimate (fddimibPORTLerEstimate)
is less than or equal to fddiPORTLer-Alarm
(fddimibPORTLerAlarm). This will be reported
with the Status Report Frames (SRF) (see 7.2.7
and 8.3).
|
| lbOptPORTUndesiredConnAttemptEvent |
9 |
|
Generated when an undesired connection attempt has
been made (see 5.2.4, 7.2.7, and 8.3).
|
| lbOptPORTEBErrorCondition |
10 |
|
Generated when the Elasticity Buffer Error-Ct
(lbOptPORTEBErrorCt) increments. This is handled
as a condition in the Status Report Protocol. It
is generated when an increment occurs in the
station's sampling period (see 7.2.7 and 8.3).
|
| lbOptPORTPathChangeEvent |
11 |
|
This event is generated when the value of the
fddiPORTCurrentPath (lbOptPORTCurrentPath)
changes. This event shall be surpressed if the
value changes from isolated to local or local
to isolated (see 7.2.7 and 8.3).
|
