ALTIGA-BMGT-STATS-MIB device MIB details by Altiga Networks Inc

ALTIGA-BMGT-STATS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ALTIGA-BMGT-STATS-MIB.

Vendor:	Altiga Networks Inc
Mib:	ALTIGA-BMGT-STATS-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *------------------------------------------------------------------
-- * ALTIGA-BMGT-STATS-MIB.my:  Altiga Bandwidth Limiting/Guarantee and Policy Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-BMGT-STATS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32
         FROM SNMPv2-SMI
      RowStatus
         FROM SNMPv2-TC
      OBJECT-GROUP, MODULE-COMPLIANCE
         FROM SNMPv2-CONF
      alBwMgmtGroup, alStatsBwMgmt
         FROM ALTIGA-MIB
      alBwMgmtMibModule
         FROM ALTIGA-GLOBAL-REG;

   altigaBwMgmMibModule MODULE-IDENTITY
      LAST-UPDATED   "200209051300Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Altiga Bandwidth Limiting/Guarantee and Policy Statistics MIB
          models counters and objects that are of management interest for bandwidth
          management.
         
          Acronyms
          The following acronyms are used in this document:

            BW:         Bandwidth

            MIB:        Management Information Base

         "

        REVISION "200209051300Z"
        DESCRIPTION
                "Added module compliance."

        REVISION "200207100000Z"
        DESCRIPTION
                "Updated with new header"

      ::= { alBwMgmtMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

alBwMgmtStatsGlobal OBJECT IDENTIFIER ::= { alStatsBwMgmt 1 }

-- Any global stuff here...

alBwMgmtStatTable OBJECT-TYPE
   SYNTAX     SEQUENCE OF AlBwMgmtStatEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
      "A table of BW Management status entries."
   ::= { alStatsBwMgmt 2 }

alBwMgmtStatEntry OBJECT-TYPE
   SYNTAX     AlBwMgmtStatEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
      "A collection of bandwidth mgmt status objects on this 
       interface."
   INDEX      { alBwMgmtStatIntfId }
   ::= { alBwMgmtStatTable 1 }

AlBwMgmtStatEntry ::= 
SEQUENCE {
   alBwMgmtStatRowStatus               RowStatus,
   alBwMgmtStatIntfId                  INTEGER,
   alBwMgmtStatGrpId                   INTEGER,
   alBwMgmtStatInConformedRate         Unsigned32,
   alBwMgmtStatInDroppedRate           Unsigned32,
   alBwMgmtStatInConformedBytes        Counter32,
   alBwMgmtStatInDroppedBytes          Counter32,
   alBwMgmtStatOutConformedRate        Unsigned32,
   alBwMgmtStatOutDroppedRate          Unsigned32,
   alBwMgmtStatOutConformedBytes       Counter32,
   alBwMgmtStatOutDroppedBytes         Counter32
}

alBwMgmtStatRowStatus OBJECT-TYPE
   SYNTAX     RowStatus
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "The status of this row."
   ::= { alBwMgmtStatEntry 1 }

alBwMgmtStatIntfId OBJECT-TYPE
   SYNTAX     INTEGER (1..3)
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "BwPolicy identifier used as the index of this row."
   ::= { alBwMgmtStatEntry 2 }
        
alBwMgmtStatGrpId OBJECT-TYPE
   SYNTAX     INTEGER (0..100000)
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "BwPolicy identifier used as the index of this row."
   ::= { alBwMgmtStatEntry 3 }
        
alBwMgmtStatInConformedRate OBJECT-TYPE
   SYNTAX     Unsigned32
   UNITS      "kbytes"
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "The counter of packets permitted by this rate limit."
   ::= { alBwMgmtStatEntry 4 }

alBwMgmtStatInDroppedRate OBJECT-TYPE
   SYNTAX     Unsigned32
   UNITS      "kbytes"
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "The counter of packets which exceeded this rate limit."
   ::= { alBwMgmtStatEntry 5 }

alBwMgmtStatInConformedBytes OBJECT-TYPE
   SYNTAX     Counter32
   UNITS      "bytes"
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "The counter of bytes which exceeded this rate limit."
   ::= { alBwMgmtStatEntry 6 }

alBwMgmtStatInDroppedBytes OBJECT-TYPE
   SYNTAX     Counter32
   UNITS      "bytes"
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "The counter of bytes which exceeded this rate limit."
   ::= { alBwMgmtStatEntry 7 }


alBwMgmtStatOutConformedRate OBJECT-TYPE
   SYNTAX     Unsigned32
   UNITS      "kbytes"
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "The counter of packets permitted by this rate limit."
   ::= { alBwMgmtStatEntry 8 }

alBwMgmtStatOutDroppedRate OBJECT-TYPE
   SYNTAX     Unsigned32
   UNITS      "kbytes"
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "The counter of packets which exceeded this rate limit."
   ::= { alBwMgmtStatEntry 9 }

alBwMgmtStatOutConformedBytes OBJECT-TYPE
   SYNTAX     Counter32
   UNITS      "bytes"
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "The counter of bytes which exceeded this rate limit."
   ::= { alBwMgmtStatEntry 10 }

alBwMgmtStatOutDroppedBytes OBJECT-TYPE
   SYNTAX     Counter32
   UNITS      "bytes"
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "The counter of bytes which exceeded this rate limit."
   ::= { alBwMgmtStatEntry 11 }

altigaBwMgmMibConformance OBJECT IDENTIFIER ::= { altigaBwMgmMibModule 1 }
altigaBwMgmMibCompliances OBJECT IDENTIFIER ::= { altigaBwMgmMibConformance 1 }

altigaBwMgmMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which 
       implement the Bandwidth Limiting/Guarantee and Policy Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      alBwMgmtStatsGroup
   }
   ::= { altigaBwMgmMibCompliances 1 }

alBwMgmtStatsGroup OBJECT-GROUP
   OBJECTS {
      alBwMgmtStatRowStatus,
      alBwMgmtStatIntfId,
      alBwMgmtStatGrpId,
      alBwMgmtStatInConformedRate,
      alBwMgmtStatInDroppedRate,
      alBwMgmtStatInConformedBytes,
      alBwMgmtStatInDroppedBytes,
      alBwMgmtStatOutConformedRate,
      alBwMgmtStatOutDroppedRate,
      alBwMgmtStatOutConformedBytes,
      alBwMgmtStatOutDroppedBytes
   }
   STATUS     current
   DESCRIPTION
      "A collection of objects providing BW Management monitoring."
   ::= { alBwMgmtGroup 2 }

END