ALTIGA-HARDWARE-STATS-MIB device MIB details by Altiga Networks Inc

ALTIGA-HARDWARE-STATS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ALTIGA-HARDWARE-STATS-MIB.

Vendor:	Altiga Networks Inc
Mib:	ALTIGA-HARDWARE-STATS-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *------------------------------------------------------------------
-- * ALTIGA-HARDWARE-STATS-MIB.my:  Altiga Hardware Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002, 2003 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-HARDWARE-STATS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter32, 
      TimeTicks, Unsigned32
         FROM SNMPv2-SMI
      DisplayString, TruthValue, TEXTUAL-CONVENTION
         FROM SNMPv2-TC
      OBJECT-GROUP, MODULE-COMPLIANCE
         FROM SNMPv2-CONF
      alStatsHardware, alHardwareGroup
         FROM ALTIGA-MIB
      alHardwareMibModule
         FROM ALTIGA-GLOBAL-REG;

      altigaHardwareStatsMibModule MODULE-IDENTITY
         LAST-UPDATED   "200303271300Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Altiga Hardware Statistics MIB models counters and objects that
          are of management interest for the hardware.
         
          Acronyms
          The following acronyms are used in this document:

            CPU:        Central Processing Unit

            MB:         Megabyte

            MIB:        Management Information Base

            PS:         Power Supply

            RPM:        Revolutions Per Minute

            SEP:        Scalable Encryption Processor

            WAN:        Wide Area Network

         "

        REVISION "200303271300Z"
        DESCRIPTION
           "Added new emun to ConcentratorCard."

        REVISION "200209051300Z"
        DESCRIPTION
           "Added module compliance."

        REVISION "200207100000Z"
        DESCRIPTION
           "Updated with new header"

      ::= { alHardwareMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

ConcentratorCard     ::= TEXTUAL-CONVENTION
   STATUS         current
   DESCRIPTION
      "Concentrator Card Type."
   SYNTAX         INTEGER {
                     none(1),
                     sep(2),
                     dualT1Wan(3),
                     sepE(4)
                  }

ConcentratorType     ::= TEXTUAL-CONVENTION
   STATUS         current
   DESCRIPTION
      "Concentrator Type indicates the chassis type."
   SYNTAX         INTEGER {
                     cxx(1), -- VPN3015 through VPN3080
                     c5(2),  -- VPN3005
                     c1(3)   -- VPN3002
                  }

alStatsHardwareGlobal   OBJECT IDENTIFIER ::= { alStatsHardware 1 }

-- Current Settings and Alarms

alHardwareCpuVoltage    OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current CPU voltage in centivolts."
   ::= { alStatsHardwareGlobal 1 }

alHardwareCpuVoltageAlarm  OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for CPU voltage.  This alarm will fired when the CPU
       voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 2 }

alHardwareCpuVoltageCount  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for CPU voltage."
   ::= { alStatsHardwareGlobal 3 }

alHardwareCpuVoltageTime   OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for CPU
       voltage."
   ::= { alStatsHardwareGlobal 4 }

alHardwarePs1Voltage3v     OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 3V voltage of Power Supply 1 in centivolts."
   ::= { alStatsHardwareGlobal 5 }

alHardwarePs1Voltage3vAlarm   OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for PS1 3v voltage.  This alarm will fired when the
       3v power supply 1 voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 6 }

alHardwarePs1Voltage3vCount   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for PS1 3v voltage."
   ::= { alStatsHardwareGlobal 7 }

alHardwarePs1Voltage3vTime OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for PS1 
       3v voltage."
   ::= { alStatsHardwareGlobal 8 }

alHardwarePs1Voltage5v     OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 5V voltage of Power Supply 1 in centivolts."
   ::= { alStatsHardwareGlobal 9 }

alHardwarePs1Voltage5vAlarm   OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for PS1 5v voltage.  This alarm will fired when the
       5v power supply 1 voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 10 }

alHardwarePs1Voltage5vCount   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for PS1 5v voltage."
   ::= { alStatsHardwareGlobal 11 }

alHardwarePs1Voltage5vTime OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for PS1
       5v voltage."
   ::= { alStatsHardwareGlobal 12 }

alHardwarePs2Voltage3v     OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 3V voltage of Power Supply 2 in centivolts."
   ::= { alStatsHardwareGlobal 13 }

alHardwarePs2Voltage3vAlarm   OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for PS2 3v voltage.  This alarm will fired when the
       3v power supply 2 voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 14 }

alHardwarePs2Voltage3vCount   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for PS2 3v voltage."
   ::= { alStatsHardwareGlobal 15 }

alHardwarePs2Voltage3vTime OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for PS2
       3v voltage."
   ::= { alStatsHardwareGlobal 16 }

alHardwarePs2Voltage5v     OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 5V voltage of Power Supply 2 in centivolts."
   ::= { alStatsHardwareGlobal 17 }

alHardwarePs2Voltage5vAlarm   OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for PS2 5v voltage.  This alarm will fired when the
       5v power supply 2 voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 18 }

alHardwarePs2Voltage5vCount   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for PS2 5v voltage."
   ::= { alStatsHardwareGlobal 19 }

alHardwarePs2Voltage5vTime OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for PS2
       5v voltage."
   ::= { alStatsHardwareGlobal 20 }

alHardwareBoardVoltage3v   OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 3V voltage of the mainboard in centivolts."
   ::= { alStatsHardwareGlobal 21 }

alHardwareBoardVoltage3vAlarm OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for the mainboard 3v voltage.  This alarm will fired
       when the 3v mainboard voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 22 }

alHardwareBoardVoltage3vCount OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for the mainboard 3v voltage."
   ::= { alStatsHardwareGlobal 23 }

alHardwareBoardVoltage3vTime  OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for the
       mainboard 3v voltage."
   ::= { alStatsHardwareGlobal 24 }

alHardwareBoardVoltage5v   OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 5V voltage of the mainboard in centivolts."
   ::= { alStatsHardwareGlobal 25 }

alHardwareBoardVoltage5vAlarm OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for the mainboard 5v voltage.  This alarm will fired
       when the 5v mainboard voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 26 }

alHardwareBoardVoltage5vCount OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for the mainboard 5v voltage."
   ::= { alStatsHardwareGlobal 27 }

alHardwareBoardVoltage5vTime  OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for the
       mainboard 5v voltage."
   ::= { alStatsHardwareGlobal 28 }

alHardwareCpuTemp    OBJECT-TYPE
   SYNTAX         Integer32 (-40..120)
   UNITS          "degrees Celsius"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current CPU temperature in degrees C."
   ::= { alStatsHardwareGlobal 29 }

alHardwareCpuTempAlarm     OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for the CPU temperature.  This alarm will fired
       when the CPU temperature is detected out of configured range."
   ::= { alStatsHardwareGlobal 30 }

alHardwareCpuTempCount     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for the CPU temperature."
   ::= { alStatsHardwareGlobal 31 }

alHardwareCpuTempTime      OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for the
       CPU temperature."
   ::= { alStatsHardwareGlobal 32 }

alHardwareCageTemp      OBJECT-TYPE
   SYNTAX         Integer32 (-40..120)
   UNITS          "degrees Celsius"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current cage temperature in degrees C."
   ::= { alStatsHardwareGlobal 33 }

alHardwareCageTempAlarm    OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for the cage temperature.  This alarm will fired
       when the cage temperature is detected out of configured range."
   ::= { alStatsHardwareGlobal 34 }

alHardwareCageTempCount    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for the cage temperature."
   ::= { alStatsHardwareGlobal 35 }

alHardwareCageTempTime     OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for the
       cage temperature."
   ::= { alStatsHardwareGlobal 36 }

alHardwareFan1Rpm    OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "RPM"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current speed of fan 1 in RPM."
   ::= { alStatsHardwareGlobal 37 }

alHardwareFan1RpmAlarm     OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for fan 1 RPM.  This alarm will fired when fan 1 RPM
       is detected out of configured range."
   ::= { alStatsHardwareGlobal 38 }

alHardwareFan1RpmCount     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for fan 1 RPM."
   ::= { alStatsHardwareGlobal 39 }

alHardwareFan1RpmTime      OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for
       fan 1 RPM."
   ::= { alStatsHardwareGlobal 40 }

alHardwareFan2Rpm    OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "RPM"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current speed of fan 2 in RPM."
   ::= { alStatsHardwareGlobal 41 }

alHardwareFan2RpmAlarm     OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for fan 2 RPM.  This alarm will fired when fan 2 RPM
       is detected out of configured range."
   ::= { alStatsHardwareGlobal 42 }

alHardwareFan2RpmCount     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for fan 2 RPM."
   ::= { alStatsHardwareGlobal 43 }

alHardwareFan2RpmTime      OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for
       fan 2 RPM."
   ::= { alStatsHardwareGlobal 44 }

alHardwareFan3Rpm    OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "RPM"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current speed of fan 3 in RPM."
   ::= { alStatsHardwareGlobal 45 }

alHardwareFan3RpmAlarm     OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for fan 3 RPM.  This alarm will fired when fan 3 RPM
       is detected out of configured range."
   ::= { alStatsHardwareGlobal 46 }

alHardwareFan3RpmCount     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for fan 3 RPM."
   ::= { alStatsHardwareGlobal 47 }

alHardwareFan3RpmTime      OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for
       fan 3 RPM."
   ::= { alStatsHardwareGlobal 48 }

-- List of Current Hardware

alHardwarePs1Type    OBJECT-TYPE
   SYNTAX         INTEGER {
                     none(1), -- no power supply detected in slot
                     ac(2)    -- AC power supply detected in slot
                  }
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of power supply for Power Supply slot 1."
   ::= { alStatsHardwareGlobal 49 }

alHardwarePs2Type    OBJECT-TYPE
   SYNTAX         INTEGER {
                     none(1), -- no power supply detected in slot
                     ac(2)    -- AC power supply detected in slot
                  }
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of power supply for Power Supply slot 2."
   ::= { alStatsHardwareGlobal 50 }

alHardwareSlot1Card     OBJECT-TYPE
   SYNTAX         ConcentratorCard
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of card in slot 1."
   ::= { alStatsHardwareGlobal 51 }

alHardwareSlot2Card     OBJECT-TYPE
   SYNTAX         ConcentratorCard
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of card in slot 2."
   ::= { alStatsHardwareGlobal 52 }

alHardwareSlot3Card     OBJECT-TYPE
   SYNTAX         ConcentratorCard
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of card in slot 3."
   ::= { alStatsHardwareGlobal 53 }

alHardwareSlot4Card     OBJECT-TYPE
   SYNTAX         ConcentratorCard
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of card in slot 4."
   ::= { alStatsHardwareGlobal 54 }

alHardwareSlot1Operational OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The operational status of card in slot 1."
   ::= { alStatsHardwareGlobal 55 }

alHardwareSlot2Operational OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The operational status of card in slot 2."
   ::= { alStatsHardwareGlobal 56 }

alHardwareSlot3Operational OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The operational status of card in slot 3."
   ::= { alStatsHardwareGlobal 57 }

alHardwareSlot4Operational OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The operational status of card in slot 4."
   ::= { alStatsHardwareGlobal 58 }

alHardwareRamSize    OBJECT-TYPE
   SYNTAX         Unsigned32
   UNITS          "MB"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The amount of memory, in MB on the concentrator."
   ::= { alStatsHardwareGlobal 59 }

alHardwareChassis    OBJECT-TYPE
   SYNTAX         ConcentratorType
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of VPN Concentrator this is."
   ::= { alStatsHardwareGlobal 60 }

alHardwareCpuVoltageNominal   OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The nominal CPU voltage in centivolts for the concentrator."
   ::= { alStatsHardwareGlobal 61 }

alHardwareClientEthPrivSwitch OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Whether or not the 3002 Hardware Client has an Ethernet Switch for
       the private interface."
   ::= { alStatsHardwareGlobal 62 }

alHardwareSerialNumber     OBJECT-TYPE
   SYNTAX         DisplayString
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Unit serial number."
   ::= { alStatsHardwareGlobal 63 }

altigaHardwareStatsMibConformance OBJECT IDENTIFIER
   ::= { altigaHardwareStatsMibModule 1 }

altigaHardwareStatsMibCompliances OBJECT IDENTIFIER
   ::= { altigaHardwareStatsMibConformance 1 }

altigaHardwareStatsMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which 
       implement the Altiga Hardware Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      altigaHardwareStatsGroup
   }
   ::= { altigaHardwareStatsMibCompliances 1 }

altigaHardwareStatsGroup OBJECT-GROUP
   OBJECTS
   {
      alHardwareCpuVoltage,
      alHardwareCpuVoltageAlarm,
      alHardwareCpuVoltageCount,
      alHardwareCpuVoltageTime,
      alHardwarePs1Voltage3v,
      alHardwarePs1Voltage3vAlarm,
      alHardwarePs1Voltage3vCount,
      alHardwarePs1Voltage3vTime,
      alHardwarePs1Voltage5v,
      alHardwarePs1Voltage5vAlarm,
      alHardwarePs1Voltage5vCount,
      alHardwarePs1Voltage5vTime,
      alHardwarePs2Voltage3v,
      alHardwarePs2Voltage3vAlarm,
      alHardwarePs2Voltage3vCount,
      alHardwarePs2Voltage3vTime,
      alHardwarePs2Voltage5v,
      alHardwarePs2Voltage5vAlarm,
      alHardwarePs2Voltage5vCount,
      alHardwarePs2Voltage5vTime,
      alHardwareBoardVoltage3v,
      alHardwareBoardVoltage3vAlarm,
      alHardwareBoardVoltage3vCount,
      alHardwareBoardVoltage3vTime,
      alHardwareBoardVoltage5v,
      alHardwareBoardVoltage5vAlarm,
      alHardwareBoardVoltage5vCount,
      alHardwareBoardVoltage5vTime,
      alHardwareCpuTemp,
      alHardwareCpuTempAlarm,
      alHardwareCpuTempCount,
      alHardwareCpuTempTime,
      alHardwareCageTemp,
      alHardwareCageTempAlarm,
      alHardwareCageTempCount,
      alHardwareCageTempTime,
      alHardwareFan1Rpm,
      alHardwareFan1RpmAlarm,
      alHardwareFan1RpmCount,
      alHardwareFan1RpmTime,
      alHardwareFan2Rpm,
      alHardwareFan2RpmAlarm,
      alHardwareFan2RpmCount,
      alHardwareFan2RpmTime,
      alHardwareFan3Rpm,
      alHardwareFan3RpmAlarm,
      alHardwareFan3RpmCount,
      alHardwareFan3RpmTime,
      alHardwarePs1Type,
      alHardwarePs2Type,
      alHardwareSlot1Card,
      alHardwareSlot2Card,
      alHardwareSlot3Card,
      alHardwareSlot4Card,
      alHardwareSlot1Operational,
      alHardwareSlot2Operational,
      alHardwareSlot3Operational,
      alHardwareSlot4Operational,
      alHardwareRamSize,
      alHardwareChassis,
      alHardwareCpuVoltageNominal,
      alHardwareClientEthPrivSwitch,
      alHardwareSerialNumber
   }
   STATUS   current
   DESCRIPTION
      "The objects for Hardware statistics."
   ::= { alHardwareGroup 2 }

END