ALTIGA-PPPOE-STATS-MIB.mib object view, vendor Altiga-Networks-Inc
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file ALTIGA-PPPOE-STATS-MIB and use it to monitor vendor specific OID's.
ALTIGA-PPPOE-STATS-MIB file content
Object view of ALTIGA-PPPOE-STATS-MIB:
Scalar Object |
alPPPoEStatsActiveSessions |
.1.3.6.1.4.1.3076.2.1.2.40.1.1 |
The number of active sessions on the interface
(currently should max at 1).
|
alPPPoEStatsTotalSessions |
.1.3.6.1.4.1.3076.2.1.2.40.1.2 |
Total Sessions since last reset.
|
alPPPoEStatsMaxSessions |
.1.3.6.1.4.1.3076.2.1.2.40.1.3 |
Peak number of sessions since last reset.
|
alPPPoEStatsIfEntry |
.1.3.6.1.4.1.3076.2.1.2.40.2.1 |
Contains the PPPoE entries for the status
binding table.
|
Tabular Object |
alPPPoEStatsIfIndex |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.1 |
The interface index for PPPoE status binding table.
|
alPPPoEStatsIfPADTRx |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.2 |
Number of PADT received.
|
alPPPoEStatsIfPADTTx |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.3 |
Number of PADT transmitted.
|
alPPPoEStatsIfGenericErrorsRx |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.4 |
Number of Generic Errors Received.
|
alPPPoEStatsIfMalformedPacketsRx |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.5 |
Number of back packets received.
|
alPPPoEStatsIfPADITimeouts |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.6 |
Number of times timedout waiting for a PADO.
|
alPPPoEStatsIfPADRTimeouts |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.7 |
Number of times timed out waiting for a PADS.
|
alPPPoEStatsIfMultPADORx |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.8 |
Number of times we received more than 1 PADO.
|
alPPPoEStatsIfSessionID |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.9 |
Session ID given by the AC.
|
alPPPoEStatsIfPeerAddr |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.10 |
MAC address of the remote AC.
|
alPPPoEStatsIfSessionState |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.11 |
State that the session is in.
|
alPPPoEStatsIfVersion |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.12 |
Version as given in the PPPoE RFC.
|
alPPPoEStatsIfType |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.13 |
Type as given in the PPPoE RFC.
|
alPPPoEStatsIfConnectTime |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.14 |
Time_t of when the session was established.
|
alPPPoEStatsIfDuration |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.15 |
Number of seconds since the session was
established.
|
alPPPoEStatsIfPeerName |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.16 |
UTF-8 string of the AC name.
|
alPPPoEStatsIfACCookie |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.17 |
Binary sequence representing the AC cookie given in
negotiations.
|
alPPPoEStatsIfHostUnique |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.18 |
Binary sequence representing the value we assigned the PADI.
|
alPPPoEStatsIfRelaySessID |
.1.3.6.1.4.1.3076.2.1.2.40.2.1.19 |
12 octets representing the Relay session if one exists.
|
Table |
alPPPoEStatsIfTable |
.1.3.6.1.4.1.3076.2.1.2.40.2 |
Contains the PPPoE binding entries for stats.
|
Object Identifier |
altigaPPPoEStatsMibModule |
.1.3.6.1.4.1.3076.1.1.45.2 |
The Altiga PPPoE Statistics MIB models counters and objects that are
of management interest for PPPoE.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
PADI: PPPoE Active Discovery Initiation
PADO: PPPoE Active Discovery Offer
PADS: PPPoE Active Discovery Session-confirmation
PADT: PPPoE Active Discovery Terminate
PPPoE: Point-to-Point Protocol over Ethernet
|
alStatsPPPoEGlobal |
.1.3.6.1.4.1.3076.2.1.2.40.1 |
altigaPPPoEStatsMibConformance |
.1.3.6.1.4.1.3076.1.1.45.2.1 |
altigaPPPoEStatsMibCompliances |
.1.3.6.1.4.1.3076.1.1.45.2.1.1 |
Group |
altigaPPPoEStatsGroup |
.1.3.6.1.4.1.3076.2.1.1.1.40.2 |
The objects for PPPoE Statistics.
|