ALTIGA-PPTP-STATS-MIB device MIB details by Altiga Networks Inc

ALTIGA-PPTP-STATS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ALTIGA-PPTP-STATS-MIB.

Vendor:	Altiga Networks Inc
Mib:	ALTIGA-PPTP-STATS-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *------------------------------------------------------------------
-- * ALTIGA-PPTP-STATS-MIB.my:  Altiga PPTP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-PPTP-STATS-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32, Gauge32
      FROM SNMPv2-SMI
   RowStatus, DisplayString, TruthValue
      FROM SNMPv2-TC
   OBJECT-GROUP, MODULE-COMPLIANCE
      FROM SNMPv2-CONF
   alStatsPptp, alPptpGroup
      FROM ALTIGA-MIB
   alPptpMibModule
      FROM ALTIGA-GLOBAL-REG;

   altigaPptpStatsMibModule MODULE-IDENTITY
      LAST-UPDATED   "200209051300Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Altiga PPTP Statistics MIB models counters and objects that are
          of management interest for PPTP tunnels.
         
          Acronyms
          The following acronyms are used in this document:

            MIB:        Management Information Base

            PPTP:       Point-to-Point Tunneling Protocol

         "

        REVISION "200209051300Z"
        DESCRIPTION
                "Added module compliance."

        REVISION "200207100000Z"
        DESCRIPTION
                "Updated with new header"

      ::= { alPptpMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

alStatsPptpGlobal OBJECT IDENTIFIER ::= { alStatsPptp 1 }

alPptpStatsLocalProtVers   OBJECT-TYPE
   SYNTAX         OCTET STRING (SIZE(2))
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "This object describes the protocol version and
                revision of the local implementation. The
                first octet contains the protocol version. The
                second octet contains the protocol revision."
   ::= { alStatsPptpGlobal 1 }

alPptpStatsLocalFraming    OBJECT-TYPE
   SYNTAX         Integer32 (0..3)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "A set of bits indicating the PPTP framing capabilities
      of this system."
   ::= { alStatsPptpGlobal 2 }

alPptpStatsLocalBearer     OBJECT-TYPE
   SYNTAX         Integer32 (0..3)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "A set of bits indicating the PPTP bearer capabilities
      of this system."
   ::= { alStatsPptpGlobal 3 }

alPptpStatsLocalFirmwareRev     OBJECT-TYPE
        SYNTAX             OCTET STRING(SIZE(2))
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object defines the local firmware revision."
        ::= { alStatsPptpGlobal 4 }

alPptpStatsTotalTunnels    OBJECT-TYPE
   SYNTAX         Gauge32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "This object returns the total number of tunnels,
      including those that did not reach the established
      state."
   ::= { alStatsPptpGlobal 5 }

alPptpStatsActiveTunnels   OBJECT-TYPE
   SYNTAX         Gauge32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "This object returns the number of tunnels that
                are currently active."
   ::= { alStatsPptpGlobal 6 }

alPptpStatsMaxTunnels      OBJECT-TYPE
   SYNTAX         Gauge32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The maximum number of simultaneously active PPTP tunnels
           since the system was booted."
   ::= { alStatsPptpGlobal 7 }

alPptpStatsTotalSessions   OBJECT-TYPE
   SYNTAX         Gauge32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "This object returns the total number of sessions,
      including those that did not reach the established
      state."
   ::= { alStatsPptpGlobal 8 }

alPptpStatsActiveSessions  OBJECT-TYPE
   SYNTAX         Gauge32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "This object returns the number of sessions that
                are currently active."
   ::= { alStatsPptpGlobal 9 }

alPptpStatsMaxSessions     OBJECT-TYPE
   SYNTAX         Gauge32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The maximum number of simultaneously active PPTP sessions
           since the system was booted."
   ::= { alStatsPptpGlobal 10 }

alPptpStatsControlRecvOctets     OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
                "This object returns the number of control channel
                 octets received."
        ::= { alStatsPptpGlobal 11 }

alPptpStatsControlRecvPackets    OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the number of control packets
                received."
        ::= { alStatsPptpGlobal 12 }

alPptpStatsControlRecvDiscards   OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the number of control packets
                received that were discarded."
        ::= { alStatsPptpGlobal 13 }

alPptpStatsControlSendOctets     OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the number of control channel
                octets that were transmitted to tunnel endpoints."
        ::= { alStatsPptpGlobal 14 }

alPptpStatsControlSendPackets    OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the number of control packets
                that were transmitted to tunnel endpoints."
        ::= { alStatsPptpGlobal 15 }

alPptpStatsPayloadRecvOctets     OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the number of payload channel
                octets that were received."
        ::= { alStatsPptpGlobal 16 }

alPptpStatsPayloadRecvPackets    OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the number of payload packets
                that were received."
        ::= { alStatsPptpGlobal 17 }

alPptpStatsPayloadRecvDiscards  OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the number of received payload
                packets that were discarded."
        ::= { alStatsPptpGlobal 18 }

alPptpStatsPayloadSendOctets     OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the number of payload channel
                octets that were transmitted to tunnel peers."
        ::= { alStatsPptpGlobal 19 }

alPptpStatsPayloadSendPackets    OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the number of payload packets
                that were transmitted to tunnel peers."
        ::= { alStatsPptpGlobal 20 }

alPptpStatsTunnelTable     OBJECT-TYPE
   SYNTAX         SEQUENCE OF AlPptpStatsTunnelEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "The PPTP tunnel status and statistics table."
   ::= { alStatsPptp 2 }

alPptpStatsTunnelEntry     OBJECT-TYPE
   SYNTAX         AlPptpStatsTunnelEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "An entry in the alPptpStatsTunnelTable."
   INDEX    { alPptpStatsTunnelPeerIpAddr }
   ::= { alPptpStatsTunnelTable 1 }

AlPptpStatsTunnelEntry ::= SEQUENCE {
   alPptpStatsTunnelRowStatus       RowStatus,
   alPptpStatsTunnelPeerIpAddr      IpAddress,
   alPptpStatsTunnelDatastreamId    Integer32,
   alPptpStatsTunnelLocalIpAddr     IpAddress,
   alPptpStatsTunnelPeerHostName    DisplayString,
   alPptpStatsTunnelPeerVendorName  DisplayString,
   alPptpStatsTunnelPeerFirmwareRev OCTET STRING,
   alPptpStatsTunnelPeerProtVers    OCTET STRING,
   alPptpStatsTunnelPeerFramingCap  Integer32,
   alPptpStatsTunnelPeerBearerCap   Integer32,
   alPptpStatsTunnelPeerMaxChan     Integer32,
   alPptpStatsTunnelActiveSessions  Counter32
}

alPptpStatsTunnelRowStatus OBJECT-TYPE
   SYNTAX         RowStatus
   MAX-ACCESS     read-write
   STATUS         current
   DESCRIPTION
          "The status of this row. Used to terminate the tunnel,
      cannot be used to create a tunnel."
   ::= { alPptpStatsTunnelEntry 1 }

alPptpStatsTunnelPeerIpAddr   OBJECT-TYPE
   SYNTAX         IpAddress
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The peer's IP address for this tunnel."
   ::= { alPptpStatsTunnelEntry 2 }

alPptpStatsTunnelDatastreamId OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The IP-GRE datastream ID of this tunnel."
   ::= { alPptpStatsTunnelEntry 3 }

alPptpStatsTunnelLocalIpAddr  OBJECT-TYPE
   SYNTAX         IpAddress
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The local IP address for this tunnel."
   ::= { alPptpStatsTunnelEntry 4 }

alPptpStatsTunnelPeerHostName OBJECT-TYPE
   SYNTAX         DisplayString
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The peer's host name, as indicated by the peer in a
      Start-Control-Connection packet."
   ::= { alPptpStatsTunnelEntry 5 }

alPptpStatsTunnelPeerVendorName  OBJECT-TYPE
   SYNTAX         DisplayString
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The peer's vendor name, as indicated by the peer in a
      Start-Control-Connection packet."
   ::= { alPptpStatsTunnelEntry 6 }

alPptpStatsTunnelPeerFirmwareRev  OBJECT-TYPE
        SYNTAX             OCTET STRING (SIZE(2))
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object contains the tunnel peer's firmware
                revision number. If the tunnel is idle this object
                should maintain its value from the last time it
                was connected."
        ::= { alPptpStatsTunnelEntry 7 }

alPptpStatsTunnelPeerProtVers OBJECT-TYPE
   SYNTAX         OCTET STRING (SIZE(2))
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "This object describes the protocol version and
                revision of the tunnel peers implementation. The
                first octet contains the protocol version. The
                second octet contains the protocol revision."
   ::= { alPptpStatsTunnelEntry 8 }

alPptpStatsTunnelPeerFramingCap  OBJECT-TYPE
   SYNTAX         Integer32 (0..3)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "This object describes the Framing Capabilities of
                the tunnel peer. If the tunnel is idle this object
                should maintain its value from the last time it was
                connected."
   ::= { alPptpStatsTunnelEntry 9 }

alPptpStatsTunnelPeerBearerCap   OBJECT-TYPE
   SYNTAX         Integer32 (0..3)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "This object describes the Bearer Capabilities of
                the tunnel peer. If the tunnel is idle this object
                should maintain its value from the last time it was
                connected."
   ::= { alPptpStatsTunnelEntry 10 }

alPptpStatsTunnelPeerMaxChan  OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The peer's maximum channels value, as indicated by 
      the peer in a Start-Control-Connection packet."
   ::= { alPptpStatsTunnelEntry 11 }

alPptpStatsTunnelActiveSessions  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "This object contains the total number of sessions
                for this tunnel."
   ::= { alPptpStatsTunnelEntry 12 }

alPptpStatsSessionTable    OBJECT-TYPE
   SYNTAX         SEQUENCE OF AlPptpStatsSessionEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "List of active sessions within tunnels."
   ::= { alStatsPptp 3 }

alPptpStatsSessionEntry    OBJECT-TYPE
   SYNTAX         AlPptpStatsSessionEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "An entry in the alPptpStatsSessionTable."
   INDEX       { alPptpStatsSessionDatastreamId }
   ::= { alPptpStatsSessionTable 1 }

AlPptpStatsSessionEntry ::= SEQUENCE {
   alPptpStatsSessionRowStatus         RowStatus,
   alPptpStatsSessionDatastreamId      Integer32,
   alPptpStatsSessionLocalCallId       Integer32,
   alPptpStatsSessionPeerCallId        Integer32,
   alPptpStatsSessionUserName          DisplayString,
   alPptpStatsSessionSerial            Integer32,
   alPptpStatsSessionMinimumSpeed      Integer32,
   alPptpStatsSessionMaximumSpeed      Integer32,
   alPptpStatsSessionConnectSpeed      Integer32,
   alPptpStatsSessionBearerType        INTEGER,
   alPptpStatsSessionFramingType       INTEGER,
   alPptpStatsSessionPhysicalChannel   Integer32,
   alPptpStatsSessionLocalWindowSize   Integer32,
   alPptpStatsSessionPeerWindowSize    Integer32,
   alPptpStatsSessionLocalPpd          Integer32,
   alPptpStatsSessionPeerPpd           Integer32,
   alPptpStatsSessionRecvOctets        Counter32,
   alPptpStatsSessionRecvPackets       Counter32,
   alPptpStatsSessionRecvDiscards      Counter32,
   alPptpStatsSessionRecvZLB           Counter32,
   alPptpStatsSessionSendOctets        Counter32,
   alPptpStatsSessionSendPackets       Counter32,
   alPptpStatsSessionSendZLB           Counter32,
   alPptpStatsSessionAckTimeouts       Counter32,
   alPptpStatsSessionLocalFlowOff      TruthValue,
   alPptpStatsSessionPeerFlowOff       TruthValue,
   alPptpStatsSessionOutOfWindow       Counter32,
   alPptpStatsSessionOutOfSequence     Counter32,
   alPptpStatsSessionTunnelPeerIpAddr  IpAddress
}

alPptpStatsSessionRowStatus   OBJECT-TYPE
   SYNTAX         RowStatus
   MAX-ACCESS     read-write
   STATUS         current
   DESCRIPTION
          "The status of this row. Used to terminate the session,
      cannot be used to create a Session."
   ::= { alPptpStatsSessionEntry 1 }

alPptpStatsSessionDatastreamId   OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The GRE-PPP datastream ID of this tunnel, used as the
           index for this row."
   ::= { alPptpStatsSessionEntry 2 }

alPptpStatsSessionLocalCallId OBJECT-TYPE
   SYNTAX         Integer32 (0..65535)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The local call ID within the tunnel of the session 
      represented by this row."
   ::= { alPptpStatsSessionEntry 3 }

alPptpStatsSessionPeerCallId  OBJECT-TYPE
   SYNTAX         Integer32 (0..65535)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The peer call ID within the tunnel of the session
      represented by this row."
   ::= { alPptpStatsSessionEntry 4 }

alPptpStatsSessionUserName    OBJECT-TYPE
        SYNTAX             DisplayString
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object identifies the peer session name on
                this interface. This is typically the login name
                of the remote user. If the user name is unknown to
                the local tunnel peer then this object will contain
                a null string."
        ::= { alPptpStatsSessionEntry 5 }

alPptpStatsSessionSerial   OBJECT-TYPE
   SYNTAX         Integer32 (0..65535)
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The call serial number within the tunnel of the session
      represented by this row."
   ::= { alPptpStatsSessionEntry 6 }

alPptpStatsSessionMinimumSpeed   OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The lowest acceptable line speed (in bits/second) 
      for this session, as indicated in the Call-Request 
      packet."
   ::= { alPptpStatsSessionEntry 7 }

alPptpStatsSessionMaximumSpeed   OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The highest acceptable line speed (in bits/second) 
      for this session, as indicated in the Call-Request 
      packet."
   ::= { alPptpStatsSessionEntry 8 }

alPptpStatsSessionConnectSpeed   OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The actual line speed (in bits/second) for this session."
   ::= { alPptpStatsSessionEntry 9 }

alPptpStatsSessionBearerType  OBJECT-TYPE
   SYNTAX         INTEGER {
               analog (1),
               digital (2),
               any (3)
            }
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "A value indicating the bearer capability required for
      this session."
   ::= { alPptpStatsSessionEntry 10 }

alPptpStatsSessionFramingType OBJECT-TYPE
   SYNTAX         INTEGER {
               asynchronous (1),
               synchronous (2),
               either (3)
            }
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "A value indicating the framing capability required for
      this session."
   ::= { alPptpStatsSessionEntry 11 }

alPptpStatsSessionPhysicalChannel   OBJECT-TYPE
   SYNTAX            Integer32
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION
          "The physical channel number used for this session."
   ::= { alPptpStatsSessionEntry 12 }

alPptpStatsSessionLocalWindowSize   OBJECT-TYPE
   SYNTAX            Integer32
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION
          "The number of received data packets this system will
      buffer for this session, as indicated in the setup packets
      for this session."
   ::= { alPptpStatsSessionEntry 13 }

alPptpStatsSessionPeerWindowSize OBJECT-TYPE
   SYNTAX            Integer32
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION
          "The number of received data packets the peer will
      buffer for this session, as indicated in the setup packets
      for this session."
   ::= { alPptpStatsSessionEntry 14 }

alPptpStatsSessionLocalPpd OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "A measure of the packet processing delay that might be
      imposed on data sent to this system, in units of 1/10
      seconds."
   ::= { alPptpStatsSessionEntry 15 }

alPptpStatsSessionPeerPpd  OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "A measure of the packet processing delay that might be
      imposed on data sent to the peer, in units of 1/10
      seconds."
   ::= { alPptpStatsSessionEntry 16 }

alPptpStatsSessionRecvOctets     OBJECT-TYPE
        SYNTAX                Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the total number payload octets
                received for this session."
        ::= { alPptpStatsSessionEntry 17 }

alPptpStatsSessionRecvPackets    OBJECT-TYPE
        SYNTAX                Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the total number of payload packets
                received for this session."
        ::= { alPptpStatsSessionEntry 18 }

alPptpStatsSessionRecvDiscards   OBJECT-TYPE
        SYNTAX                Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the total number of payload packets
                received that were discarded for this session."
        ::= { alPptpStatsSessionEntry 19 }

alPptpStatsSessionRecvZLB     OBJECT-TYPE
        SYNTAX                Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the total number of Zero Length
                Body acknowlegement payload packets received for
                this session."
        ::= { alPptpStatsSessionEntry 20 }

alPptpStatsSessionSendOctets     OBJECT-TYPE
        SYNTAX                Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the total number of payload octets
                transmitted for this session."
        ::= { alPptpStatsSessionEntry 21 }

alPptpStatsSessionSendPackets    OBJECT-TYPE
        SYNTAX                Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the total number of payload packets
                transmitted for this session."
        ::= { alPptpStatsSessionEntry 22 }

alPptpStatsSessionSendZLB  OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the total number of Zero
                Length Body acknowledgement packets transmitted
                for this session."
        ::= { alPptpStatsSessionEntry 23 }

alPptpStatsSessionAckTimeouts    OBJECT-TYPE
        SYNTAX             Counter32
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "This object returns the total number of
                acknowledgement timeouts seen on payload
                packets for this session."
        ::= { alPptpStatsSessionEntry 24 }

alPptpStatsSessionLocalFlowOff  OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Indicates whether the session is in a locally flowed-off
      state because the number of outstanding unacknowledged
      packets received from the peer is equal to the local
      window size."
   ::= { alPptpStatsSessionEntry 25 }

alPptpStatsSessionPeerFlowOff OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Indicates whether the session peer is in a flowed-off
      state because the number of outstanding unacknowledged
      packets sent to the peer is equal to the peer's window 
      size."
   ::= { alPptpStatsSessionEntry 26 }

alPptpStatsSessionOutOfWindow OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of data packets received from the peer which
      were received outside of the offered receive window."
   ::= { alPptpStatsSessionEntry 27 }

alPptpStatsSessionOutOfSequence     OBJECT-TYPE
   SYNTAX            Counter32
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION
          "The number of data packets that were not received in the
                correct order (as per the sequence number)."
   ::= { alPptpStatsSessionEntry 28 }

alPptpStatsSessionTunnelPeerIpAddr  OBJECT-TYPE
   SYNTAX            IpAddress
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION
          "The peer's IP address for the tunnel over which this session
      is established."
   ::= { alPptpStatsSessionEntry 29 }

altigaPptpStatsMibConformance OBJECT IDENTIFIER ::= { altigaPptpStatsMibModule 1 }
altigaPptpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaPptpStatsMibConformance 1 }

altigaPptpStatsMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which 
       implement the Altiga PPTP Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      altigaPptpStatsGroup
   }
   ::= { altigaPptpStatsMibCompliances 1 }

altigaPptpStatsGroup OBJECT-GROUP
   OBJECTS
   {
      alPptpStatsLocalProtVers,
      alPptpStatsLocalFraming,
      alPptpStatsLocalBearer,
      alPptpStatsLocalFirmwareRev,
      alPptpStatsTotalTunnels,
      alPptpStatsActiveTunnels,
      alPptpStatsMaxTunnels,
      alPptpStatsTotalSessions,
      alPptpStatsActiveSessions,
      alPptpStatsMaxSessions,
      alPptpStatsControlRecvOctets,
      alPptpStatsControlRecvPackets,
      alPptpStatsControlRecvDiscards,
      alPptpStatsControlSendOctets,
      alPptpStatsControlSendPackets,
      alPptpStatsPayloadRecvOctets,
      alPptpStatsPayloadRecvPackets,
      alPptpStatsPayloadRecvDiscards,
      alPptpStatsPayloadSendOctets,
      alPptpStatsPayloadSendPackets,
      alPptpStatsTunnelRowStatus,
      alPptpStatsTunnelDatastreamId,
      alPptpStatsTunnelLocalIpAddr,
      alPptpStatsTunnelPeerIpAddr,
      alPptpStatsTunnelPeerHostName,
      alPptpStatsTunnelPeerVendorName,
      alPptpStatsTunnelPeerFirmwareRev,
      alPptpStatsTunnelPeerProtVers,
      alPptpStatsTunnelPeerFramingCap,
      alPptpStatsTunnelPeerBearerCap,
      alPptpStatsTunnelPeerMaxChan,
      alPptpStatsTunnelActiveSessions,
      alPptpStatsSessionRowStatus,
      alPptpStatsSessionDatastreamId,
      alPptpStatsSessionLocalCallId,
      alPptpStatsSessionPeerCallId,
      alPptpStatsSessionUserName,
      alPptpStatsSessionSerial,
      alPptpStatsSessionMinimumSpeed,
      alPptpStatsSessionMaximumSpeed,
      alPptpStatsSessionConnectSpeed,
      alPptpStatsSessionBearerType,
      alPptpStatsSessionFramingType,
      alPptpStatsSessionPhysicalChannel,
      alPptpStatsSessionLocalWindowSize,
      alPptpStatsSessionPeerWindowSize,
      alPptpStatsSessionLocalPpd,
      alPptpStatsSessionPeerPpd,
      alPptpStatsSessionRecvOctets,
      alPptpStatsSessionRecvPackets,
      alPptpStatsSessionRecvDiscards,
      alPptpStatsSessionRecvZLB,
      alPptpStatsSessionSendOctets,
      alPptpStatsSessionSendPackets,
      alPptpStatsSessionSendZLB,
      alPptpStatsSessionAckTimeouts,
      alPptpStatsSessionLocalFlowOff,
      alPptpStatsSessionPeerFlowOff,
      alPptpStatsSessionOutOfWindow,
      alPptpStatsSessionOutOfSequence,
      alPptpStatsSessionTunnelPeerIpAddr
   }
   STATUS   current
   DESCRIPTION
          "The objects for PPTP statistics."
   ::= { alPptpGroup 2 }

END