ALTIGA-SSH-STATS-MIB device MIB details by Altiga Networks Inc

ALTIGA-SSH-STATS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ALTIGA-SSH-STATS-MIB.

Vendor:	Altiga Networks Inc
Mib:	ALTIGA-SSH-STATS-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *------------------------------------------------------------------
-- * ALTIGA-SSH-STATS-MIB.my:  Altiga SSH Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-SSH-STATS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Unsigned32, IpAddress,
          Integer32, TimeTicks
         FROM SNMPv2-SMI
      DisplayString
         FROM SNMPv2-TC
      EncryptionAlgorithm
              FROM ALTIGA-SESSION-STATS-MIB
      OBJECT-GROUP, MODULE-COMPLIANCE
         FROM SNMPv2-CONF
      alStatsSsh, alSshGroup
         FROM ALTIGA-MIB
      alSshMibModule
         FROM ALTIGA-GLOBAL-REG;

   altigaSshStatsMibModule MODULE-IDENTITY
      LAST-UPDATED   "200209051300Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Altiga SSH Statistics MIB models counters and objects that are
          of management interest for SSH.
         
          Acronyms
          The following acronyms are used in this document:

            MIB:        Management Information Base

            SSH:        Secure Shell

         "

        REVISION "200209051300Z"
        DESCRIPTION
                "Added module compliance."

        REVISION "200207100000Z"
        DESCRIPTION
                "Updated with new header"

      ::= { alSshMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

alStatsSshGlobal  OBJECT IDENTIFIER ::= { alStatsSsh 1 }

alSshStatsOctetsSent    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of octets sent."
   ::= { alStatsSshGlobal 1 }

alSshStatsOctetsRcvd    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of octets received."
   ::= { alStatsSshGlobal 2 }

alSshStatsPacketsSent      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of packets."
   ::= { alStatsSshGlobal 3 }

alSshStatsPacketsRcvd      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of packets received."
   ::= { alStatsSshGlobal 4 }

alSshStatsTotalSessions    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The total number of SSH sessions established."
   ::= { alStatsSshGlobal 5 }

alSshStatsActiveSessions   OBJECT-TYPE
   SYNTAX         Gauge32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of active sessions."
   ::= { alStatsSshGlobal 6 }

alSshStatsMaxSessions      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The maximum number of active sessions that existed at one any time."
   ::= { alStatsSshGlobal 7 }


alSshStatsSessionTable     OBJECT-TYPE
   SYNTAX         SEQUENCE OF AlSshStatsSessionEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "List of active HTTP sessions."
   ::= { alStatsSsh 2 }

alSshStatsSessionEntry        OBJECT-TYPE
   SYNTAX         AlSshStatsSessionEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "An entry in the alSshStatsSessionTable."
   INDEX       { alSshStatsSessionIndex }
   ::= { alSshStatsSessionTable 1 }

AlSshStatsSessionEntry ::= SEQUENCE {
   alSshStatsSessionIndex           Integer32,
   alSshStatsSessionName            DisplayString,
   alSshStatsSessionIpAddr          IpAddress,
   alSshStatsSessionPort            Unsigned32,
   alSshStatsSessionStartTime       TimeTicks,
   alSshStatsSessionLoginTime       Unsigned32,
   alSshStatsSessionEncr            EncryptionAlgorithm,
   alSshStatsSessionOctetsSent      Counter32,
   alSshStatsSessionOctetsRcvd      Counter32,
   alSshStatsSessionPacketsSent     Counter32,
   alSshStatsSessionPacketsRcvd     Counter32
}

alSshStatsSessionIndex     OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Index of this session."
   ::= { alSshStatsSessionEntry 1 }
   
alSshStatsSessionName      OBJECT-TYPE
   SYNTAX         DisplayString
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Name of the administrator using this session."
   ::= { alSshStatsSessionEntry 2 }
   
alSshStatsSessionIpAddr OBJECT-TYPE
   SYNTAX         IpAddress
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Remote IP address of this session.."
   ::= { alSshStatsSessionEntry 3 }
   
alSshStatsSessionPort      OBJECT-TYPE
   SYNTAX         Unsigned32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Remote IP port address of this session.."
   ::= { alSshStatsSessionEntry 4 }
   
alSshStatsSessionStartTime OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Login time of this session."
   ::= { alSshStatsSessionEntry 5 }
   
alSshStatsSessionLoginTime OBJECT-TYPE
   SYNTAX         Unsigned32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "time_t value of the concentrator at the start of this session."
   ::= { alSshStatsSessionEntry 6 }
   
alSshStatsSessionEncr      OBJECT-TYPE
   SYNTAX         EncryptionAlgorithm
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The type of encryption algorithm used for this session."
   ::= { alSshStatsSessionEntry 7 }
   
alSshStatsSessionOctetsSent   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Number of octets sent during this session."
   ::= { alSshStatsSessionEntry 8 }
   
alSshStatsSessionOctetsRcvd   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Number of octets received during this session."
   ::= { alSshStatsSessionEntry 9 }
   
alSshStatsSessionPacketsSent  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Number of packets sent during this session."
   ::= { alSshStatsSessionEntry 10 }
   
alSshStatsSessionPacketsRcvd  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Number of packets received during this session."
   ::= { alSshStatsSessionEntry 11 }
   
altigaSshStatsMibConformance OBJECT IDENTIFIER ::= { altigaSshStatsMibModule 1 }
altigaSshStatsMibCompliances OBJECT IDENTIFIER ::= { altigaSshStatsMibConformance 1 }

altigaSshStatsMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which 
       implement the Altiga SSH Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      altigaSshStatsGroup
   }
   ::= { altigaSshStatsMibCompliances 1 }

altigaSshStatsGroup OBJECT-GROUP
   OBJECTS
   {
      alSshStatsOctetsSent,
      alSshStatsOctetsRcvd,
      alSshStatsPacketsSent,
      alSshStatsPacketsRcvd,
      alSshStatsTotalSessions,
      alSshStatsActiveSessions,
      alSshStatsMaxSessions,
      alSshStatsSessionIndex,
      alSshStatsSessionName,
      alSshStatsSessionIpAddr,
      alSshStatsSessionPort,
      alSshStatsSessionStartTime,
      alSshStatsSessionLoginTime,
      alSshStatsSessionEncr,
      alSshStatsSessionOctetsSent,
      alSshStatsSessionOctetsRcvd,
      alSshStatsSessionPacketsSent,
      alSshStatsSessionPacketsRcvd
   }
   STATUS   current
   DESCRIPTION
          "The objects for SSH statistics."
   ::= { alSshGroup 2 }

END