CABH-CDP-MIB device MIB details by Cable Television Laboratories Inc
CABH-CDP-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CABH-CDP-MIB.
| Vendor: | Cable Television Laboratories Inc |
|---|---|
| Mib: | CABH-CDP-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
CABH-CDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI MacAddress, TruthValue, DateAndTime, RowStatus FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF InetAddressType, InetAddress FROM INET-ADDRESS-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB clabProjCableHome FROM CLAB-DEF-MIB; --================================================================= -- -- History: -- -- Date Modified by Reason -- 04/05/02 Issued I01 -- 09/20/02 Issued I02 -- 10/25/02 IETF I-D revisions -- 04/11/03 Issued I03 -- --================================================================= cabhCdpMib MODULE-IDENTITY LAST-UPDATED "200304110000Z" -- April 11, 2003 ORGANIZATION "CableLabs Broadband Access Department" CONTACT-INFO "Kevin Luehrs Postal: Cable Television Laboratories, Inc. 400 Centennial Parkway Louisville, Colorado 80027-1266 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 E-mail: k.luehrs@cablelabs.com" DESCRIPTION "This MIB module supplies the basic management objects for the CableHome DHCP Portal (CDP) portion of the PS database. Acknowledgements: Roy Spitzer - Consultant to CableLabs Mike Mannette - Consultant to CableLabs Randy Dunton - Intel Dmitrii Loukianov - Intel Itay Sherman - Texas Instruments Chris Zacker - Broadcom Rick Vetter - Consultant to CableLabs John Bevilacqua - YAS" ::= { clabProjCableHome 4 } cabhCdpObjects OBJECT IDENTIFIER ::= { cabhCdpMib 1 } cabhCdpBase OBJECT IDENTIFIER ::= { cabhCdpObjects 1 } cabhCdpAddr OBJECT IDENTIFIER ::= { cabhCdpObjects 2 } cabhCdpServer OBJECT IDENTIFIER ::= { cabhCdpObjects 3 } -- -- The following group describes the base objects in the Cable Home -- DHCP Portal. The rest of this group deals addresses defined on -- the LAN side. -- cabhCdpSetToFactory OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Reading this object always returns false(2). When the cabhCdpSetToFactory object is set to true(1), the PS must take the following actions: 1. Clear all cabhCdpLanAddrEntries in the CDP LAN Address Table. 2. The CDS must offer the factory default DHCP options at the next lease renewal time. 3. Reset the following objects to their factory default values: cabhCdpLanTransThreshold, cabhCdpLanTransAction, cabhCdpWanDataIpAddrCount, cabhCdpLanPoolStartType, cabhCdpLanPoolStart, cabhCdpLanPoolEndType, cabhCdpLanPoolEnd, cabhCdpServerNetworkNumberType, cabhCdpServerNetworkNumber, cabhCdpServerSubnetMaskType, cabhCdpServerSubnetMask, cabhCdpServerTimeOffset, cabhCdpServerRouterType, cabhCdpServerRouter, cabhCdpServerDnsAddressType, cabhCdpServerDnsAddress, cabhCdpServerSyslogAddressType, cabhCdpServerSyslogAddress, cabhCdpServerDomainName, cabhCdpServerTTL, cabhCdpServerInterfaceMTU, cabhCdpServerVendorSpecific, cabhCdpServerLeaseTime, cabhCdpServerDhcpAddressType, cabhCdpServerDhcpAddress, cabhCdpServerCommitStatus" ::= { cabhCdpBase 1 } cabhCdpLanTransCurCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of active leases in the cabhCdpLanAddrTable (the number of row entries in the table that have a cabhCdpLanAddrMethod value of reservationActive(2) or dynamicActive (4)). This count does not include expired leases or reservations not associated with a current lease." ::= { cabhCdpBase 2 } cabhCdpLanTransThreshold OBJECT-TYPE SYNTAX INTEGER (0..65533) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold number of LAN-Trans IP addresses allocated or assigned above which the PS generates an alarm condition. Whenever an attempt is made to allocate a LAN-Trans IP address when cabhCdpLanTransCurCount is greater than or equal to cabhCdpLanTransThreshold, an event is generated. A value of 0 indicates that the CDP sets the threshold at the highest number of addresses in the LAN address pool." DEFVAL {0 } ::= { cabhCdpBase 3 } cabhCdpLanTransAction OBJECT-TYPE SYNTAX INTEGER { normal (1), noAssignment (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action taken when the CDS assigns a LAN-Trans address and the number of LAN-Trans addresses assigned (cabhCdpLanTransCurCount) is greater than the threshold (cabhCdpLanTransThreshold) The actions are as follows: normal - assign a LAN-Trans IP address as would normally occur if the threshold was not exceeded. noAssignment - do not assign a LAN-Trans IP address." DEFVAL { normal } ::= { cabhCdpBase 4 } cabhCdpWanDataIpAddrCount OBJECT-TYPE SYNTAX INTEGER ( 0..63 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the number of WAN-Data IP addresses the PS's CDC must attempt to acquire via DHCP." DEFVAL {0 } ::= { cabhCdpBase 5 } -- -- CDP Address Management Tables -- --==================================================================== -- -- cabhCdpLanAddrTable (CDP LAN Address Table) -- -- The cabhCdpLanAddrTable contains the DHCP parameters -- for each IP address served to the LAN-Trans realm. -- -- This table contains a list of entries for the LAN side CDP -- parameters. These parameters can be set -- either by the CDP or by the cable operator through the CMP. -- --========================================================================= cabhCdpLanAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF CabhCdpLanAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a list of LAN-Trans realm parameters. This table has one row entry for each allocated LAN-Trans IP address. Each row must have at least a valid cabhCdpLanAddrMethod, a cabhCdpLanAddrIpType, a unique cabhCdpLanAddrIp, and a unique cabhCdpLanAddrClientId value. Static/Manual address assignment: To create a new DHCP address reservation, the NMS creates a row with: an index comprised of a new cabhCdpLanAddrIp and its cabhCdpLanAddrIpType, a new unique cabhCdpLanAddrClientID, (an empty LeaseCreateTime and empty LeaseExpireTime,) and a cabhCdpLanDataAddrRowStatus of createAndGo(4). If the syntax and values of the new row - indicating a reservation - are valid, the PS must set cabhCdpLanAddrMethod to reservationInactive(1) and cabhCdpLanDataAddrRowStatus to active(1). When the PS grants a lease for a reserved IP, it must set the cabhCdpLanAddrMethod object for that row to reservationActive(2). When a lease for a reserved IP expires, the PS must set the corresponding row's cabhCdpLanAddrMethod object to reservationInactive(1). For row entries that represent lease reservations - rows in which the cabhCdpLanAddrMethod object has a value of either reservationInactive(1) or reservationActive(2) - the cabhCdpLanAddrIpType, cabhCdpLanAddrIp, cabhCdpLanAddrClientID, cabhCdpLanAddrMethod, and cabhCdpLanAddrHostName object values must persist across PS reboots. Dynamic address assignment: When the PS grants a lease for a non-reserved IP, it must set the cabhCdpLanAddrMethod object for that row to dynamicActive(4). When a lease for a non-reserved IP expires, the PS must set the corresponding row's cabhCdpLanAddrMethod object to dynamicInactive(3). The PS must create new row entries using cabhCdpLanAddrIp values that are unique to this table. If all cabhCdpLanAddrIp values in the range defined by cabhCdpLanPoolStart and cabhCdpLanPoolEnd are in use in this table, the PS may overwrite the cabhCdpLanAddrClientId of a row that has a cabhCdpLanAddrMethod object with a value of dynamicInactive(3) with a new cabhCdpLanAddrClientId value and use that cabhCdpLanAddrIp as part of a new lease. For row entries that represent active leases - rows in which the cabhCdpLanAddrMethod object has a value of dynamicActive(4) - the cabhCdpLanAddrIpType, cabhCdpLanAddrIp, cabhCdpLanAddrClientID, cabhCdpLanAddrMethod, and cabhCdpLanAddrHostName object values must persist across PS reboots." ::= { cabhCdpAddr 1 } cabhCdpLanAddrEntry OBJECT-TYPE SYNTAX CabhCdpLanAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of general parameters pertaining to LAN-Trans IP address reservations and leases." INDEX { cabhCdpLanAddrIpType, cabhCdpLanAddrIp } ::= { cabhCdpLanAddrTable 1 } CabhCdpLanAddrEntry ::= SEQUENCE { cabhCdpLanAddrIpType InetAddressType, cabhCdpLanAddrIp InetAddress, cabhCdpLanAddrClientID MacAddress, cabhCdpLanAddrLeaseCreateTime DateAndTime, cabhCdpLanAddrLeaseExpireTime DateAndTime, cabhCdpLanAddrMethod INTEGER, cabhCdpLanAddrHostName SnmpAdminString, cabhCdpLanAddrRowStatus RowStatus } cabhCdpLanAddrIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of IP address assigned to the LAN IP Device in the LAN-Trans Realm." ::= { cabhCdpLanAddrEntry 1 } cabhCdpLanAddrIp OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address assigned to the LAN IP Device. This parameter is entered by the CDP when the CDS grants a lease to a LAN IP Device in the LAN-Trans realm and creates a row in this table. Alternatively, this parameter can be entered by the NMS through the CMP, when the NMS creates a new DHCP address reservation. Each cabhCdpLanAddrIp in the table must fall within the range of IPs defined inclusively by cabhCdpLanPoolStart and cabhCdpLanPoolEnd. The PS must return an inconsistentValue error if the NMS attempts to create a row entry with a cabhCdpLanAddrIP value that falls outside of this range or is not unique from all existing cabhCdpLanAddrIP entries in this table. The address type of this object is specified by cabhCdpLanAddrIpType." ::= { cabhCdpLanAddrEntry 2 } cabhCdpLanAddrClientID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The client's (i.e., LAN IP Device's) hardware address as indicated in the chaddr field of its DHCP REQUEST message. There is a one-to-one relationship between the hardware address and the LAN IP Device. This parameter is entered by the PS (CDP) when the CDS grants a lease to a LAN IP Device in the LAN-Trans realm and creates a row in this table. Alternatively this parameter can be created by the NMS through the CMP, when the NMS creates a new DHCP address reservation by accessing the cabhCdpLanDataAddrRowStatus object with an index comprised of a unique cabhCdpLanAddrIp and creating a row with a unique cabhCdpLanAddrClientID." ::= { cabhCdpLanAddrEntry 3 } cabhCdpLanAddrLeaseCreateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the date and time that the LAN-Trans lease was created (if it has not yet been renewed) or last renewed." ::= { cabhCdpLanAddrEntry 4 } cabhCdpLanAddrLeaseExpireTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the date and time that the LAN-trans lease expired or will expire." ::= { cabhCdpLanAddrEntry 5 } cabhCdpLanAddrMethod OBJECT-TYPE SYNTAX INTEGER { reservationInactive (1), reservationActive (2), dynamicInactive (3), dynamicActive (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The IP allocation method indicated by this row. reservationInactive(1) indicates a reserved IP that has not yet been leased or that has an expired lease. reservationActive(2) indicates a reserved IP that has an active lease. dynamicInactive(3) indicates an IP that was once dynamically assigned to a LAN-Trans device but currently has an expired lease. dynamicActive(4) indicates an IP that was dynamically assigned to a LAN-Trans device that has a current lease." ::= { cabhCdpLanAddrEntry 6 } cabhCdpLanAddrHostName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Host Name of the LAN IP address, based on DCHP option 12." ::= { cabhCdpLanAddrEntry 7 } cabhCdpLanAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus interlock for creation and deletion of row entries. The PS must not allow the NMS to set RowStatus to notInService(2). The PS must assign a RowStatus of notInService(2) to any new row entry created with a non-unique, cabhCdpLanAddrClientID value. The PS must assign a RowStatus of notReady(3) to any new row entry created without a cabhCdpLanAddrClientID. The PS will prevent modification of this table's columns and return an inconsistentValue error, if the NMS attempts to make such modifications while the RowStatus is active(1)." ::= { cabhCdpLanAddrEntry 8 } --======================================================================== -- -- cabhCdpWanDataAddrTable (CDP WAN-Data Address Table) -- -- The cabhCdpWanDataAddrTable contains the configuration or DHCP -- parameters for each IP address mapping per WAN-Data IP Address. -- --========================================================================= cabhCdpWanDataAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF CabhCdpWanDataAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains WAN-Data address realm information." ::= { cabhCdpAddr 2 } cabhCdpWanDataAddrEntry OBJECT-TYPE SYNTAX CabhCdpWanDataAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of general parameter for CDP WAN-Data address realm." INDEX { cabhCdpWanDataAddrIndex } ::= { cabhCdpWanDataAddrTable 1 } CabhCdpWanDataAddrEntry ::= SEQUENCE { cabhCdpWanDataAddrIndex INTEGER, cabhCdpWanDataAddrClientId OCTET STRING, cabhCdpWanDataAddrIpType InetAddressType, cabhCdpWanDataAddrIp InetAddress, cabhCdpWanDataAddrRenewalTime Integer32, cabhCdpWanDataAddrRowStatus RowStatus } cabhCdpWanDataAddrIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index into table." ::= { cabhCdpWanDataAddrEntry 1 } cabhCdpWanDataAddrClientId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "A unique WAN-Data ClientID used when attempting the acquire a WAN-Data IP Address via DHCP." ::= { cabhCdpWanDataAddrEntry 2 } cabhCdpWanDataAddrIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type assigned on the WAN-Data side." DEFVAL { ipv4 } ::= { cabhCdpWanDataAddrEntry 3 } cabhCdpWanDataAddrIp OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address assigned on the WAN-Data side." ::= { cabhCdpWanDataAddrEntry 4 } cabhCdpWanDataAddrRenewalTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time remaining before the lease expires. This is based on DHCP Option 51." ::= { cabhCdpWanDataAddrEntry 5 } cabhCdpWanDataAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus interlock for creation and deletion of row entries. Any writable object in a row can be modified at any time while the row is active(1). The PS must assign a RowStatus of notInService(2) to any new row entry created with a cabhCdpWanDataAddrClientId that is not unique within this table." ::= { cabhCdpWanDataAddrEntry 6 } --=================================================================== -- -- cabhCdpWanDnsServerTable (CDP WAN DNS Server Table) -- -- The cabhCdpWanDnsServerTable is a table of 3 cable network -- and Internet DNS Servers. -- --=================================================================== cabhCdpWanDnsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF CabhCdpWanDnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IP addresses of cable network and Internet DNS servers, in the order of preference in which the PS's CNP will query them, when it cannot resolve a DNS query using local information. Entries in this table are updated with the information contained in DHCP Option 6, received during both the WAN-Man and WAN-Data IP acquisition processes." ::= { cabhCdpAddr 3 } cabhCdpWanDnsServerEntry OBJECT-TYPE SYNTAX CabhCdpWanDnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of cable network and Internet DNS servers." INDEX { cabhCdpWanDnsServerOrder } ::= { cabhCdpWanDnsServerTable 1 } CabhCdpWanDnsServerEntry ::= SEQUENCE { cabhCdpWanDnsServerOrder INTEGER, cabhCdpWanDnsServerIpType InetAddressType, cabhCdpWanDnsServerIp InetAddress } cabhCdpWanDnsServerOrder OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), tertiary(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The order of preference for cable network and Internet DNS servers, as listed in DHCP option 6 (Domain Server). Any time the CDC receives valid IP address information within DHCP Option 6, as part of lease acquisition or renewal of a WAN-Man or WAN-Data IP, it must update this information into this table. As entries in DHCP Option 6 are listed in order of preference the highest priority entry in DHCP Option 6 must correspond to the row with a cabhCdpWanDnsServerOrder with a value of 1. If DHCP Option 6 contains 2 valid IP addresses, the PS must update the rows with cabhCdpWanDnsServerOrder values of 1 and 2. If DHCP Option 6 contains 3 valid IP addresses, the PS must update rows with cabhCdpWanDnsServerOrder values of 1, 2, and 3. Any DNS server information included in DHCP Option 6 beyond primary, secondary and tertiary will not be represented in this table." ::= { cabhCdpWanDnsServerEntry 1 } cabhCdpWanDnsServerIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter indicates the IP address type of a WAN DNS server." DEFVAL { ipv4 } ::= { cabhCdpWanDnsServerEntry 2 } cabhCdpWanDnsServerIp OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter indicates the IP address of a WAN DNS server. The type of this address is specified by cabhCdpWanDnsServerIpType." ::= { cabhCdpWanDnsServerEntry 3 } -- -- DHCP Server Side (CDS) Option Values for the LAN-Trans realm -- cabhCdpLanPoolStartType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Address type of the start of range LAN Trans IP Addresses." DEFVAL { ipv4 } ::= { cabhCdpServer 1 } cabhCdpLanPoolStart OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The start of range LAN Trans IP Addresses." DEFVAL { 'c0a8000a'h } -- 192.168.0.10 -- 192.168.0.0 is the network number -- 192.168.0.255 is broadcast -- address and 192.168.0.1 -- is reserved for the router ::= { cabhCdpServer 2 } cabhCdpLanPoolEndType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Address type of the end of range LAN Trans IP Addresses." DEFVAL { ipv4 } ::= { cabhCdpServer 3 } cabhCdpLanPoolEnd OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The end of range for LAN-Trans IP Addresses." DEFVAL { 'c0a800fe'h } -- 192.168.0.254 ::= { cabhCdpServer 4 } cabhCdpServerNetworkNumberType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address type of the LAN-Trans network number." DEFVAL { ipv4 } ::= { cabhCdpServer 5 } cabhCdpServerNetworkNumber OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The LAN-Trans network number." DEFVAL { 'c0a80000'h } ::= { cabhCdpServer 6 } cabhCdpServerSubnetMaskType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Type of LAN-Trans Subnet Mask." DEFVAL { ipv4 } ::= { cabhCdpServer 7 } cabhCdpServerSubnetMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Option value 1 - Value of LAN-Trans Subnet Mask." DEFVAL { 'ffffff00'h } -- 255.255.255.0 ::= { cabhCdpServer 8 } cabhCdpServerTimeOffset OBJECT-TYPE SYNTAX Integer32 (-86400..86400) -- 0 to 24 hours (in seconds) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Option value 2 - Value of LAN-Trans Time Offset from Coordinated Universal Time (UTC)." DEFVAL { 0 } -- UTC ::= { cabhCdpServer 9 } cabhCdpServerRouterType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Type of Address, Router for the LAN-Trans address realm." DEFVAL { ipv4 } ::= { cabhCdpServer 10 } cabhCdpServerRouter OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Option value 3 - Router for the LAN-Trans address realm." DEFVAL { 'c0a80001'h } -- 192.168.0.1 ::= { cabhCdpServer 11 } cabhCdpServerDnsAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Type of IP Addresses of the LAN-Trans address realm DNS servers." DEFVAL { ipv4 } ::= { cabhCdpServer 12 } cabhCdpServerDnsAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Addresses of the LAN-Trans address realm DNS servers. As a default there is only one DNS server and it is the address specified in Option Value 3 - cabhCdpServerRouter. Only one address is specified." DEFVAL { 'c0a80001'h } -- 192.168.0.1 ::= { cabhCdpServer 13 } cabhCdpServerSyslogAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The Type of IP Address of the LAN-Trans SYSLOG servers." DEFVAL { ipv4 } ::= { cabhCdpServer 14 } cabhCdpServerSyslogAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Addresses of the LAN-Trans SYSLOG servers. As a default there are no SYSLOG Servers. The factory defaults contains the indication of no Syslog Server value equals (0.0.0.0)." DEFVAL { '00000000'h } -- 0.0.0.0 ::= { cabhCdpServer 15 } cabhCdpServerDomainName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Option value 15 - Domain name of LAN-Trans address realm." DEFVAL {""} ::= { cabhCdpServer 16 } cabhCdpServerTTL OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Option value 23 - LAN-Trans Time to Live." DEFVAL { 64 } ::= { cabhCdpServer 17 } cabhCdpServerInterfaceMTU OBJECT-TYPE SYNTAX Integer32 (0 | 68..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "Option value 26 - LAN-Trans Interface MTU. If the value of this object is 0, the PS must not include this option in its DHCP Offer or DHCP Ack messages to LAN IP Devices." DEFVAL { 0 } ::= { cabhCdpServer 18 } cabhCdpServerVendorSpecific OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Option value 43 - Vendor Specific Options." DEFVAL { ''h } ::= { cabhCdpServer 19 } cabhCdpServerLeaseTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Option value 51 –Lease Time for LAN IP Devices in the LAN-Trans realm (seconds)." DEFVAL { 3600 } ::= { cabhCdpServer 20 } cabhCdpServerDhcpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Option value 54 - Type of LAN-Trans DHCP server IP address." DEFVAL { ipv4 } ::= { cabhCdpServer 21 } cabhCdpServerDhcpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Option value 54 - LAN-Trans DHCP server IP address. It defaults to the router address as specified in cabhCdpServerRouter. Alternatively a vendor may want to separate CDS address from router address." DEFVAL { 'c0a80001'h } -- 192.168.0.1 ::= { cabhCdpServer 22 } cabhCdpServerControl OBJECT-TYPE SYNTAX INTEGER { restoreConfig(1), commitConfig (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The control for the CDS (DHCP Server) configuration. All changes to the cabhCdpServer mib objects are reflected when reading the value of the mib objects; however, those changes are NOT applied to the running configuration of the CDS until they are successfully committed via use of the cabhCdpServerControl object. If changes are made to the cabhCdpServer mib objects which are not yet successfully committed to the CDS, the cabhCdpServerControl object can be used to rollback all changes to the last valid CDS configuration and discard all intermediate changes. restoreConfig - Setting cabhCdpServerControl to this value will cause any changes to the cabhCdpServer objects not yet committed be reset to the values from the current running configuration of the CDS. commitConfig – Setting cabhCdpServerControl to this value will cause the CDS to validate and apply the valid cabhCdpServer mib settings to its running configuration. The cabhCdpServerCommitStatus object will detail the status of this operation." DEFVAL { restoreConfig } ::= { cabhCdpServer 23 } cabhCdpServerCommitStatus OBJECT-TYPE SYNTAX INTEGER { commitSucceeded (1), commitNeeded (2), commitFailed (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of committing the current cabhCdpServer mib object values to the running configuration of the CDS (DHCP Server). commitSucceeded - indicates the current cabhCdpServer mib object values are valid and have been successfully committed to the running configuration of the CDS. commitNeeded - indicates that the value of one or more objects in cabhCdpServer mib group have been changed but not yet committed to the running configuration of the CDS. commitFailed – indicates the PS was unable to commit the cabhCdpServer mib object values to the running configuration of the CDS due to conflicts in those values." DEFVAL { commitSucceeded } ::= { cabhCdpServer 24 } -- -- notification group is for future extension. -- cabhCdpNotification OBJECT IDENTIFIER ::= { cabhCdpMib 2 0 } cabhCdpConformance OBJECT IDENTIFIER ::= { cabhCdpMib 3 } cabhCdpCompliances OBJECT IDENTIFIER ::= { cabhCdpConformance 1 } cabhCdpGroups OBJECT IDENTIFIER ::= { cabhCdpConformance 2 } -- -- Notification Group -- -- compliance statements cabhCdpBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that implement MTA feature." MODULE --cabhCdpMib -- unconditionally mandatory groups MANDATORY-GROUPS { cabhCdpGroup } ::= { cabhCdpCompliances 3 } cabhCdpGroup OBJECT-GROUP OBJECTS { cabhCdpSetToFactory, cabhCdpLanTransCurCount, cabhCdpLanTransThreshold, cabhCdpLanTransAction, cabhCdpWanDataIpAddrCount, cabhCdpLanAddrClientID, cabhCdpLanAddrLeaseCreateTime, cabhCdpLanAddrLeaseExpireTime, cabhCdpLanAddrMethod, cabhCdpLanAddrHostName, cabhCdpLanAddrRowStatus, cabhCdpWanDataAddrClientId, cabhCdpWanDataAddrIpType, cabhCdpWanDataAddrIp, cabhCdpWanDataAddrRenewalTime, cabhCdpWanDataAddrRowStatus, cabhCdpWanDnsServerIpType, cabhCdpWanDnsServerIp, cabhCdpLanPoolStartType, cabhCdpLanPoolStart, cabhCdpLanPoolEndType, cabhCdpLanPoolEnd, cabhCdpServerNetworkNumberType, cabhCdpServerNetworkNumber, cabhCdpServerSubnetMaskType, cabhCdpServerSubnetMask, cabhCdpServerTimeOffset, cabhCdpServerRouterType, cabhCdpServerRouter, cabhCdpServerDnsAddressType, cabhCdpServerDnsAddress, cabhCdpServerSyslogAddressType, cabhCdpServerSyslogAddress, cabhCdpServerDomainName, cabhCdpServerTTL, cabhCdpServerInterfaceMTU, cabhCdpServerVendorSpecific, cabhCdpServerLeaseTime, cabhCdpServerDhcpAddressType, cabhCdpServerDhcpAddress, cabhCdpServerControl, cabhCdpServerCommitStatus } STATUS current DESCRIPTION "Group of objects for CableHome CDP MIB." ::= { cabhCdpGroups 1 } END