| portSelGrpIndex |
.1.3.6.1.4.1.9.10.16.1.1.1.1.1 |
|
An arbitrary and unique index for this portSelGrpEntry. If
portSelGrpTable entries are recreated by the agent after a
restart, then the portSelGrpIndex value must be retained
across a restart as well.
|
| portSelGrpDescr |
.1.3.6.1.4.1.9.10.16.1.1.1.1.2 |
|
An administratively-assigned descriptive label for this
portSelGrp entry.
|
| portSelGrpCreateTime |
.1.3.6.1.4.1.9.10.16.1.1.1.1.3 |
|
The value of sysUpTime when this portSelGrp entry was
activated. This can be used by the management station to
ensure that the table has not been deleted and recreated
between polls.
|
| portSelGrpOwner |
.1.3.6.1.4.1.9.10.16.1.1.1.1.4 |
|
The entity that configured this entry and is therefore
using the resources assigned to it.
|
| portSelGrpStatus |
.1.3.6.1.4.1.9.10.16.1.1.1.1.5 |
|
The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. No objects
are required to be written prior to the row being set to
active(1). However, all portSelTable entries which are to
be included in collections on behalf of this
portSelectGroup, must be completely configured and activated
before this object is set to active(1), since the associated
instances of portSelStatus cannot be modified once this
object has been set to active(1).
If this object is not equal to active(1), all associated
data collections shall be deleted (e.g., any associated
collections in the atmStats, atmHostTable or
atmMatrixSDTable).
Note that associated portSelTable and any configured
collection control entries (e.g., atmHostControlTable) are
not deleted when this entry leaves the active state.
|
| portSelCollectGroup |
.1.3.6.1.4.1.9.10.16.1.1.2.1.1 |
|
This object identifies the associated instance of
portSelGrpIndex, which indicates the portSelectGroup to
which this port is assigned.
This object may not be modified if the associated instance
of portSelStatus is equal to active(1).
|
| portSelCreateTime |
.1.3.6.1.4.1.9.10.16.1.1.2.1.2 |
|
The value of sysUpTime when this entry was activated. This
can be used by the management station to ensure that the
table has not been deleted and recreated between polls.
|
| portSelOwner |
.1.3.6.1.4.1.9.10.16.1.1.2.1.3 |
|
The entity that configured this entry and is therefore
using the resources assigned to it.
|
| portSelStatus |
.1.3.6.1.4.1.9.10.16.1.1.2.1.4 |
|
The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
Specifically, an appropriate value for the
portSelCollectGroup object must be set before this object
may be set to active(1). An agent may wish to allow
portSelTable entries to exist which reference non-existent
portSelGrpTable entries, in order to reduce row creation
order dependencies.
All portSelTable entries which are to be included in a
particular collection (as indicated by the
portSelCollectGroup object), should be completely configured
and activated before the associated portSelGrpStatus object
is set to active(1). Configuration of a portSelectGroup
cannot be modified once collections on its behalf have been
started.
This object may not be modified if the associated
portSelGroupStatus in in the active(1) state, indicated by a
portSelGrpIndex value identical to the value of the
portSelCollectGroup object in this entry.
|
| atmStatsControlDropEvents |
.1.3.6.1.4.1.9.10.16.1.2.1.1.1 |
|
The total number of events in which cells which should have
been counted in the associated atmStatsEntry, but were
dropped by the probe due to lack of resources. Note that
this number is not necessarily the number of cells or calls
dropped; it is just the number of times this condition has
been detected.
|
| atmStatsControlOwner |
.1.3.6.1.4.1.9.10.16.1.2.1.1.2 |
|
The entity that configured this entry and is therefore
using the resources assigned to it.
|
| atmStatsControlStatus |
.1.3.6.1.4.1.9.10.16.1.2.1.1.3 |
|
The status of this atmStatsControlEntry.
This control entry may be created and destroyed
independently of the associated portSelGrpEntry, however its
associated atmStatsTable can exist only when the
portSelGrpEntry controlling this collection is active.
If this object is not equal to active(1), all associated
entries in the atmStatsTable shall be deleted.
|
| atmStatsSClass |
.1.3.6.1.4.1.9.10.16.1.2.2.1.1 |
|
The quality of service classification for this entry. See
the ServiceClass textual convention for details and specific
class-of-service values.
|
| atmStatsCreateTime |
.1.3.6.1.4.1.9.10.16.1.2.2.1.2 |
|
The value of sysUpTime when this entry was created. This
can be used by the management station to ensure that the
entry has not been deleted and recreated between polls.
|
| atmStatsCells |
.1.3.6.1.4.1.9.10.16.1.2.2.1.3 |
|
The total number of error-free cells detected on all ATM
connections on behalf of this portSelectGroup collection.
Note that a particular cell may only cause this counter to
increment once, even if multiple criteria is met for
inclusion in this portSelectGroup.
|
| atmStatsCellsRollovers |
.1.3.6.1.4.1.9.10.16.1.2.2.1.4 |
|
The number of times that the associated instance of the
atmStatsCells object has transitioned from the value 2^^32-1
to zero.
|
| atmStatsHCCells |
.1.3.6.1.4.1.9.10.16.1.2.2.1.5 |
|
The high capacity version of the atmStatsCells object.
|
| atmStatsNumCallAttempts |
.1.3.6.1.4.1.9.10.16.1.2.2.1.6 |
|
The number of call attempts detected on all signalled ATM
connections on behalf of this portSelectGroup collection. A
probe should increment this counter each time a connection
setup attempt (identified with this portSelectGroup) is
detected. For point-to-multipoint connections, this counter
is incremented once per counted connection, regardless of
the number of leafs identified in the connection.
|
| atmStatsNumCalls |
.1.3.6.1.4.1.9.10.16.1.2.2.1.7 |
|
The number of successfully established calls detected on
all signalled ATM connections on behalf of this
portSelectGroup collection. Note that this value includes
successfully established calls that are currently in
progress. A probe should increment this counter each time a
valid connection (identified with this portSelectGroup) is
successfully established. For point-to-multipoint ATM
connections, this counter is incremented once per counted
connection, regardless of the number of leafs identified in
the connection. Note that when a point-to-point connection
setup enters on one port and leaves on another port in the
same port select group, it is counted only once.
|
| atmStatsConnTime |
.1.3.6.1.4.1.9.10.16.1.2.2.1.8 |
|
The elapsed time of all calls identified by the associated
instance of the atmStatsNumCallAttempts object. Note that
point-to-multipoint calls are counted only once, regardless
of the number of leafs participating in the call.
|
| atmHostControlInserts |
.1.3.6.1.4.1.9.10.16.1.3.1.1.1 |
|
The number of times an atmHost entry has been inserted into
the atmHost table. If an entry is inserted, then deleted,
and then inserted, this counter will be incremented by 2.
To allow for efficient implementation strategies, agents may
delay updating this object for short periods of time. For
example, an implementation strategy may allow internal data
structures to differ from those visible via SNMP for short
periods of time. This counter may reflect the internal data
structures for those short periods of time.
Note that the table size can be determined by subtracting
atmHostControlDeletes from atmHostControlInserts.
|
| atmHostControlDeletes |
.1.3.6.1.4.1.9.10.16.1.3.1.1.2 |
|
The number of times an atmHost entry has been deleted from
the atmHost table (for any reason). If an entry is deleted,
then inserted, and then deleted, this counter will be
incremented by 2.
To allow for efficient implementation strategies, agents may
delay updating this object for short periods of time. For
example, an implementation strategy may allow internal data
structures to differ from those visible via SNMP for short
periods of time. This counter may reflect the internal data
structures for those short periods of time.
Note that the table size can be determined by subtracting
atmHostControlDeletes from atmHostControlInserts.
|
| atmHostControlMaxDesiredEntries |
.1.3.6.1.4.1.9.10.16.1.3.1.1.3 |
|
The maximum number of entries that are desired in the
atmHostTable on behalf of this control entry. The probe will
not create more than this number of associated entries in
the table, but may choose to create fewer entries in this
table for any reason including the lack of resources.
If this value is set to -1, the probe may create any number
of entries in this table.
If the associated instance of atmHostControlStatus object is
equal to active(1), this object may not be modified.
|
| atmHostControlPriority |
.1.3.6.1.4.1.9.10.16.1.3.1.1.4 |
|
The priority this collection should be given to retain
resources, in the event the probe must reclaim some
resources in order to add new entries to an existing atmHost
collection or add new collections of other types.
If the associated instance of atmHostControlStatus object is
equal to active(1), this object may not be modified.
|
| atmHostControlAddrCollectScope |
.1.3.6.1.4.1.9.10.16.1.3.1.1.5 |
|
This object controls the granularity of address collection
in atmHostTable entries created on behalf of this control
entry, according to the rules specified by the
AddressCollectScope textual convention.
If the associated instance of atmHostControlStatus object is
equal to active(1), this object may not be modified.
|
| atmHostControlDropEvents |
.1.3.6.1.4.1.9.10.16.1.3.1.1.6 |
|
The total number of events in which cells which should have
been counted in the associated atmHostEntry, but were
dropped by the probe due to lack of resources. Note that
this number is not necessarily the number of cells or calls
dropped; it is just the number of times this condition has
been detected.
|
| atmHostControlOwner |
.1.3.6.1.4.1.9.10.16.1.3.1.1.7 |
|
The entity that configured this entry and is therefore
using the resources assigned to it.
|
| atmHostControlStatus |
.1.3.6.1.4.1.9.10.16.1.3.1.1.8 |
|
The status of this atmHostControlEntry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
Specifically, appropriate values for the associated
instances of atmHostControlMaxDesiredEntries,
atmHostControlPriority, and atmHostControlAddrCollectScope
must be set before this object may be set to active(1).
This control entry may be created and destroyed
independently of the associated portSelGrpEntry, however its
associated atmHostTable can exist only when the
portSelGrpEntry controlling this collection is active.
If this object is not equal to active(1), all associated
entries in the atmHostTable shall be deleted.
|
| atmHostAddress |
.1.3.6.1.4.1.9.10.16.1.3.2.1.1 |
|
The ATM address for this atmHostEntry.
This is represented as an octet string with specific
semantics and length as identified by the AtmAddr textual
convention.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table.
|
| atmHostSClass |
.1.3.6.1.4.1.9.10.16.1.3.2.1.2 |
|
The quality of service classification for this entry. See
the ServiceClass textual convention for details and specific
class-of-service values.
|
| atmHostCreateTime |
.1.3.6.1.4.1.9.10.16.1.3.2.1.3 |
|
The value of sysUpTime when this entry was activated. This
can be used by the management station to ensure that the
entry has not been deleted and recreated between polls.
|
| atmHostInCells |
.1.3.6.1.4.1.9.10.16.1.3.2.1.4 |
|
The number of error-free cells detected on ATM connections
associated with this portSelectGroup, in which this ATM
address was identified as the receiver address, or one of
the leaf addresses on a point-to-multipoint ATM connection.
|
| atmHostInCellsRollovers |
.1.3.6.1.4.1.9.10.16.1.3.2.1.5 |
|
The number of times that the associated instance of the
atmHostInCells object has transitioned from the value
2^^32-1 to zero.
|
| atmHostInHCCells |
.1.3.6.1.4.1.9.10.16.1.3.2.1.6 |
|
The high capacity version of the atmHostInCells object.
|
| atmHostOutCells |
.1.3.6.1.4.1.9.10.16.1.3.2.1.7 |
|
The number of error-free cells detected on ATM connections
associated with this portSelectGroup, in which this ATM
address was identified as the sender address.
|
| atmHostOutCellsRollovers |
.1.3.6.1.4.1.9.10.16.1.3.2.1.8 |
|
The number of times that the associated instance of the
atmHostOutCells object has transitioned from the value
2^^32-1 to zero.
|
| atmHostOutHCCells |
.1.3.6.1.4.1.9.10.16.1.3.2.1.9 |
|
The high capacity version of the atmHostOutCells object.
|
| atmHostInNumCallAttempts |
.1.3.6.1.4.1.9.10.16.1.3.2.1.10 |
|
The number of calls detected on ATM connections associated
with this entry, in which the associated endpoint address
was identified as the Called Party in an signalled ATM
connection establishment attempt.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection attempt is detected in which this ATM host is
identified as the Called Party, or one of the leaf addresses
for point-to-multipoint ATM connections.
|
| atmHostInNumCalls |
.1.3.6.1.4.1.9.10.16.1.3.2.1.11 |
|
The number of successfully established calls detected on
ATM connections associated with this entry, in which the
associated endpoint address was identified as the Called
Party address.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection is successfully established in which this ATM
host is identified as the Called Party address, or one of
the leaf addresses for point-to-multipoint ATM connections.
|
| atmHostOutNumCallAttempts |
.1.3.6.1.4.1.9.10.16.1.3.2.1.12 |
|
The number of calls detected on ATM connections associated
with this entry, in which the associated endpoint address
was identified as the Calling Party in an signalled ATM
connection establishment attempt.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection attempt is detected in which this ATM host is
identified as the Calling Party.
Note that for point-to-multipoint ATM connections, this
counter is incremented only once per call, regardless of the
number of leafs established at setup time or the number of
leaf-initiated-join attempts since the call was
established.
|
| atmHostOutNumCalls |
.1.3.6.1.4.1.9.10.16.1.3.2.1.13 |
|
The number of successfully established calls detected on
ATM connections associated with this entry, in which the
associated endpoint address was identified as the Calling
Party address.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection is successfully established in which this ATM
host is identified as the Calling Party address.
|
| atmHostInConnTime |
.1.3.6.1.4.1.9.10.16.1.3.2.1.14 |
|
The elapsed time of all calls identified by the associated
instance of atmHostInNumCallAttempts.
|
| atmHostOutConnTime |
.1.3.6.1.4.1.9.10.16.1.3.2.1.15 |
|
The elapsed time of all calls identified by the associated
instance of atmHostOutNumCallAttempts.
|
| atmMatrixControlInserts |
.1.3.6.1.4.1.9.10.16.1.4.1.1.1 |
|
The number of times an atmMatrix entry has been inserted
into the atmMatrix table. If an entry is inserted, then
deleted, and then inserted, this counter will be incremented
by 2. The addition of a conversation into both the
atmMatrixSDTable and atmMatrixDSTable shall be counted as
two insertions (even though every addition into one table
must be accompanied by an insertion into the other).
To allow for efficient implementation strategies, agents may
delay updating this object for short periods of time. For
example, an implementation strategy may allow internal data
structures to differ from those visible via SNMP for short
periods of time. This counter may reflect the internal data
structures for those short periods of time.
Note that the table size can be determined by subtracting
atmMatrixControlDeletes from atmMatrixControlInserts, and
dividing the result by two.
|
| atmMatrixControlDeletes |
.1.3.6.1.4.1.9.10.16.1.4.1.1.2 |
|
The number of times an atmMatrix entry has been deleted
from the atmMatrix table (for any reason). If an entry is
deleted, then inserted, and then deleted, this counter will
be incremented by 2. The deletion of a conversation from
both the atmMatrixSDTable and atmMatrixDSTable shall be
counted as two deletions (even though every deletion from
one table must be accompanied by a deletion from the other).
To allow for efficient implementation strategies, agents may
delay updating this object for short periods of time. For
example, an implementation strategy may allow internal data
structures to differ from those visible via SNMP for short
periods of time. This counter may reflect the internal data
structures for those short periods of time.
Note that the table size can be determined by subtracting
atmMatrixControlDeletes from atmMatrixControlInserts, and
dividing the result by two.
|
| atmMatrixControlMaxDesiredEntries |
.1.3.6.1.4.1.9.10.16.1.4.1.1.3 |
|
The maximum number of entries that are desired in the
atmMatrixTable on behalf of this control entry. The probe
will not create more than this number of associated entries
in the table, but may choose to create fewer entries in this
table for any reason including the lack of resources.
If this value is set to -1, the probe may create any number
of entries in this table.
If the associated instance of atmMatrixControlStatus object
is equal to active(1), this object may not be modified.
|
| atmMatrixControlPriority |
.1.3.6.1.4.1.9.10.16.1.4.1.1.4 |
|
The priority this collection should be given to retain
resources, in the event the probe must reclaim some
resources in order to add new entries to an existing
atmMatrix collection or add new collections of other types.
If the associated instance of atmMatrixControlStatus object
is equal to active(1), this object may not be modified.
|
| atmMatrixControlAddrCollectScope |
.1.3.6.1.4.1.9.10.16.1.4.1.1.5 |
|
This object controls the granularity of address collection
in atmMatrixSDTable and atmMatrixDSTable entries created on
behalf of this control entry, according to the rules
specified by the AddressCollectScope textual convention.
If the associated instance of atmMatrixControlStatus object
is equal to active(1), this object may not be modified.
|
| atmMatrixControlDropEvents |
.1.3.6.1.4.1.9.10.16.1.4.1.1.6 |
|
The total number of events in which cells which should have
been counted in the associated atmMatrixSDEntry and
atmMatrixDSEntry, but were dropped by the probe due to lack
of resources. Note that this number is not necessarily the
number of cells or calls dropped; it is just the number of
times this condition has been detected.
|
| atmMatrixControlOwner |
.1.3.6.1.4.1.9.10.16.1.4.1.1.7 |
|
The entity that configured this entry and is therefore
using the resources assigned to it.
|
| atmMatrixControlStatus |
.1.3.6.1.4.1.9.10.16.1.4.1.1.8 |
|
The status of this atmMatrixControlEntry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
Specifically, the associated instances of
atmMatrixControlMaxDesiredEntries, atmMatrixControlPriority,
and atmMatrixControlAddrCollectScope objects must be set to
appropriate values before this object may be set to
active(1).
This control entry may be created and destroyed
independently of the associated portSelGrpEntry, however its
associated atmMatrixSDTable and atmMatrixDSTable can exist
only when the portSelGrpEntry controlling this collection is
active.
If this object is not equal to active(1), all associated
entries in the atmMatrixSDTable and atmMatrixDSTable shall
be deleted.
|
| atmMatrixSDSrcAddress |
.1.3.6.1.4.1.9.10.16.1.4.2.1.1 |
|
The transmitting endpoint ATM address for this
atmMatrixSDEntry.
This is represented as an octet string with specific
semantics and length as identified by the AtmAddr textual
convention.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table.
|
| atmMatrixSDDstAddress |
.1.3.6.1.4.1.9.10.16.1.4.2.1.2 |
|
The destination endpoint ATM address for this
atmMatrixSDEntry.
This is represented as an octet string with specific
semantics and length as identified by the AtmAddr textual
convention.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table.
|
| atmMatrixSDSClass |
.1.3.6.1.4.1.9.10.16.1.4.2.1.3 |
|
The quality of service classification for this entry. See
the ServiceClass textual convention for details and specific
class-of-service values.
|
| atmMatrixSDCreateTime |
.1.3.6.1.4.1.9.10.16.1.4.2.1.4 |
|
The value of sysUpTime when this entry was activated. This
can be used by the management station to ensure that the
entry has not been deleted and recreated between polls.
|
| atmMatrixSDCells |
.1.3.6.1.4.1.9.10.16.1.4.2.1.5 |
|
The number of error-free cells detected on connections in
which these ATM addresses were identified as the
transmitting and receiving endpoint addresses.
Note that for point-to-multipoint connections, an entry is
created for each root-to-leaf address-pair that exists, and
each cell sent from the root on a point-to-multipoint ATM
connection is counted once in each distinct matrix entry.
|
| atmMatrixSDCellsRollovers |
.1.3.6.1.4.1.9.10.16.1.4.2.1.6 |
|
The number of times that the associated instance of the
atmMatrixSDCells object has transitioned from the value
2^^32-1 to zero.
|
| atmMatrixSDHCCells |
.1.3.6.1.4.1.9.10.16.1.4.2.1.7 |
|
The high capacity version of the atmMatrixSDCells object.
|
| atmMatrixSDNumCallAttempts |
.1.3.6.1.4.1.9.10.16.1.4.2.1.8 |
|
The number of SVC call setup attempts detected on ATM
connections within the specified portSelectGroup, in which
the indicated atmMatrixSDSrcAddress endpoint address was
identified as the Calling Party and the indicated
atmMatrixSDDstAddress was identified as the Called Party.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection attempt is detected in which these ATM addresses
are identified as the calling and called parties.
|
| atmMatrixSDNumCalls |
.1.3.6.1.4.1.9.10.16.1.4.2.1.9 |
|
The number of successful SVC call setups detected on ATM
connections within the specified portSelectGroup, in which
the indicated atmMatrixSDSrcAddress endpoint address was
identified as the Calling Party and the indicated
atmMatrixSDDstAddress was identified as the Called Party.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
valid connection is established in which these ATM addresses
are identified as the calling and called parties.
|
| atmMatrixSDConnTime |
.1.3.6.1.4.1.9.10.16.1.4.2.1.10 |
|
The elapsed time of all calls identified by the associated
instance of atmMatrixSDNumCallAttempts.
|
| atmMatrixDSDstAddress |
.1.3.6.1.4.1.9.10.16.1.4.3.1.2 |
|
The destination endpoint ATM address for this
atmMatrixDSEntry.
This is represented as an octet string with specific
semantics and length as identified by the AtmAddr textual
convention.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table.
|
| atmMatrixDSSrcAddress |
.1.3.6.1.4.1.9.10.16.1.4.3.1.1 |
|
The transmitting endpoint ATM address for this
atmMatrixDSEntry.
This is represented as an octet string with specific
semantics and length as identified by the AtmAddr textual
convention.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table.
|
| atmMatrixDSSClass |
.1.3.6.1.4.1.9.10.16.1.4.3.1.3 |
|
The quality of service classification for this entry. See
the ServiceClass textual convention for details and specific
class-of-service values.
|
| atmMatrixDSCreateTime |
.1.3.6.1.4.1.9.10.16.1.4.3.1.4 |
|
The value of sysUpTime when this entry was activated. This
can be used by the management station to ensure that the
entry has not been deleted and recreated between polls.
|
| atmMatrixDSCells |
.1.3.6.1.4.1.9.10.16.1.4.3.1.5 |
|
The number of error-free cells detected on ATM connections
in which these ATM addresses were identified as the
transmitting and receiving endpoint addresses.
Note that for point-to-multipoint connections, an entry is
created for each root-to-leaf address-pair that exists, and
each cell sent from the root on a point-to-multipoint ATM
connection is counted once in each distinct matrix entry.
|
| atmMatrixDSCellsRollovers |
.1.3.6.1.4.1.9.10.16.1.4.3.1.6 |
|
The number of times that the associated instance of the
atmMatrixDSCells object has transitioned from the value
2^^32-1 to zero.
|
| atmMatrixDSHCCells |
.1.3.6.1.4.1.9.10.16.1.4.3.1.7 |
|
The high capacity version of the atmMatrixDSCells object.
|
| atmMatrixDSNumCallAttempts |
.1.3.6.1.4.1.9.10.16.1.4.3.1.8 |
|
The number of SVC call setup attempts detected on ATM
connections within the specified portSelectGroup, in which
the indicated atmMatrixDSSrcAddress endpoint address was
identified as the Calling Party and the indicated
atmMatrixDSDstAddress was identified as the Called Party.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection attempt is detected in which these ATM addresses
are identified as the calling and called parties.
|
| atmMatrixDSNumCalls |
.1.3.6.1.4.1.9.10.16.1.4.3.1.9 |
|
The number of successful SVC call setups detected on ATM
connections within the specified portSelectGroup, in which
the indicated atmMatrixDSSrcAddress endpoint address was
identified as the Calling Party and the indicated
atmMatrixDSDstAddress was identified as the Called Party.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
valid connection is established in which these ATM addresses
are identified as the calling and called parties.
|
| atmMatrixDSConnTime |
.1.3.6.1.4.1.9.10.16.1.4.3.1.10 |
|
The elapsed time of all calls identified by the associated
instance of atmMatrixDSNumCallAttempts.
|
| atmMatrixTopNControlIndex |
.1.3.6.1.4.1.9.10.16.1.4.4.1.1 |
|
An index that is used to uniquely identify an entry in the
atmMatrixTopNControlTable. Each such entry defines one top
N report prepared on behalf of one atmMatrix entry, which
must exist before this entry may be created.
|
| atmMatrixTopNControlRateBase |
.1.3.6.1.4.1.9.10.16.1.4.4.1.2 |
|
The variable for each atmMatrix entry that the
atmMatrixTopNEntries are sorted by.
This object may not be modified if the associated
atmMatrixTopNControlStatus object is equal to active(1).
|
| atmMatrixTopNControlSClass |
.1.3.6.1.4.1.9.10.16.1.4.4.1.3 |
|
The service class for which this topN control entry is
collecting information in associated atmMatrixTopN reports.
This object may not be modified if the associated
atmMatrixTopNControlStatus object is equal to active(1).
|
| atmMatrixTopNControlTimeRemaining |
.1.3.6.1.4.1.9.10.16.1.4.4.1.4 |
|
The number of seconds left in the report currently being
collected. When this object is modified by the management
station, a new collection is started, possibly aborting a
currently running report. The new value is used as the
requested duration of this report, and is immediately loaded
into the associated atmMatrixTopNControlDuration object.
When the report finishes, the probe will automatically start
another collection with the same initial value of
atmMatrixTopNControlTimeRemaining. Thus the management
station may simply read the resulting reports repeatedly,
checking the startTime and duration each time to ensure that
a report was not missed or that the report parameters were
not changed.
While the value of this object is non-zero, it decrements by
one per second until it reaches zero. At the time that this
object decrements to zero, the report is made accessible in
the atmMatrixTopNTable, overwriting any report that may be
there.
When this object is modified by the management station, any
associated entries in the atmMatrixTopNTable shall be
deleted.
|
| atmMatrixTopNControlGeneratedReports |
.1.3.6.1.4.1.9.10.16.1.4.4.1.5 |
|
The number of reports that have been generated by this
entry.
|
| atmMatrixTopNControlDuration |
.1.3.6.1.4.1.9.10.16.1.4.4.1.6 |
|
The number of seconds that this report has collected during
the last sampling interval.
When the associated atmMatrixTopNControlTimeRemaining object
is set, this object shall be set by the probe to the same
value and shall not be modified until the next time the
atmMatrixTopNControlTimeRemaining is set.
This value shall be zero if no reports have been requested
for this atmMatrixTopNControlEntry.
|
| atmMatrixTopNControlRequestedSize |
.1.3.6.1.4.1.9.10.16.1.4.4.1.7 |
|
The maximum number of host entries requested for this
report.
When this object is created or modified, the probe should
set atmMatrixTopNControlGrantedSize as closely to this
object as is possible for the particular probe
implementation and available resources.
|
| atmMatrixTopNControlGrantedSize |
.1.3.6.1.4.1.9.10.16.1.4.4.1.8 |
|
The maximum number of host entries in this report.
When the associated atmMatrixTopNControlRequestedSize object
is created or modified, the probe should set this object as
closely to the requested value as is possible for the
particular implementation and available resources. The probe
must not lower this value except as a result of a set to the
associated atmMatrixTopNControlRequestedSize object.
For example, if the value of atmMatrixTopNControlRateBase is
equal to atmMatrixTopNCells(1), when the next topN report is
generated, host entries with the highest value of
atmMatrixSDCells shall be placed in this table in decreasing
order of this rate until there is no more room or until
there are no more matrix entries. Each atmMatrixSDCells
value is copied to the associated atmMatrixTopNRate object.
It is an implementation-specific matter how entries with the
same value are sorted. It is also an implementation-
specific matter as to whether or not zero-valued entries are
available.
|
| atmMatrixTopNControlStartTime |
.1.3.6.1.4.1.9.10.16.1.4.4.1.9 |
|
The value of sysUpTime when this top N report was last
started. In other words, this is the time that the
associated atmMatrixTopNControlTimeRemaining object was
modified to start the requested report or the time the
report was last automatically (re)started.
This object may be used by the management station to
determine if a report was missed or not.
|
| atmMatrixTopNControlOwner |
.1.3.6.1.4.1.9.10.16.1.4.4.1.10 |
|
The entity that configured this entry and is therefore
using the resources assigned to it.
|
| atmMatrixTopNControlStatus |
.1.3.6.1.4.1.9.10.16.1.4.4.1.11 |
|
The status of this atmMatrixTopNControlEntry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
If this object is not equal to active(1), all associated
entries in the atmMatrixTopNTable shall be deleted by the
agent.
|
| atmMatrixTopNIndex |
.1.3.6.1.4.1.9.10.16.1.4.5.1.1 |
|
An index that uniquely identifies an entry in the
atmMatrixTopNTable among those in the same report. This
index is between 1 and N, where N is the number of entries
in this report.
Each conversation in the selected atmMatrixSDTable, for the
report interval, is ranked in descending order of the metric
identified by the atmMatrixTopNRate object.
For example, if the value of atmMatrixTopNControlRateBase is
equal to atmMatrixTopNCells(1), increasing values of
atmMatrixTopNIndex shall be assigned to entries with
decreasing delta values of atmMatrixSDCells (for the report
interval), until index N is assigned or there are no more
atmMatrixSDEntries.
|
| atmMatrixTopNSrcAddress |
.1.3.6.1.4.1.9.10.16.1.4.5.1.2 |
|
The ATM endpoint address identified as the source of the
traffic measured in this report.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table.
|
| atmMatrixTopNDstAddress |
.1.3.6.1.4.1.9.10.16.1.4.5.1.3 |
|
The ATM endpoint address identified as the destination of
the traffic measured in this report.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table.
|
| atmMatrixTopNRate |
.1.3.6.1.4.1.9.10.16.1.4.5.1.4 |
|
The value of the ranked metric for this conversation, for
this report.
If the associated value of atmMatrixTopNRateBase is equal to
atmMatrixTopNCells(1), then this object is assigned the
delta value of the atmMatrixSDCells object during this
report interval.
If the associated value of atmMatrixTopNRateBase is equal to
atmMatrixTopNNumCallAttempts(2), then this object is
assigned the delta value of the atmMatrixSDNumCallAttempts
object during this report interval.
If the associated value of atmMatrixTopNRateBase is equal to
atmMatrixTopNNumCalls(3), then this object is assigned the
delta value of the atmMatrixSDNumCalls object during this
report interval.
If the associated value of atmMatrixTopNRateBase is equal to
atmMatrixTopNConnTime(4), then this object is assigned the
delta value of the atmMatrixSDConnTime object during this
report interval.
|
| atmMatrixTopNReverseRate |
.1.3.6.1.4.1.9.10.16.1.4.5.1.5 |
|
The value of the associated metric for this conversation,
and for this report, but for the reverse direction.
For example, if the associated value of
atmMatrixTopNRateBase is equal to atmMatrixTopNCells(1),
then this object contains the atmMatrixSDCells delta cell
rate for the reverse direction traffic (i.e., destination to
source traffic).
|
