CISCO-ATM-CAPABILITY device MIB details by Cisco

CISCO-ATM-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-ATM-CAPABILITY.

Vendor:	Cisco
Mib:	CISCO-ATM-CAPABILITY  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- ciscoAtmCapabilities MIB
--
-- AGENT-CAPABILITIES mib for ATM-MIB 
--
-- June 2002, Subra Hegde
--
-- Copyright(c) 2002 by Cisco Systems, Inc.
--
-- *****************************************************************

CISCO-ATM-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;   

ciscoAtmCapability MODULE-IDENTITY
        LAST-UPDATED    "200206120000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                        Tel: +1 800 553-NETS

                E-mail: cs-wanatm@cisco.com"
        DESCRIPTION
                "The Agent Capabilities for ATM-MIB."
        REVISION "200206120000Z"
        DESCRIPTION
                "Initial Version of the MIB module."
        ::= { ciscoAgentCapability 9999 }

ciscoAtmCapabilityV2R00 AGENT-CAPABILITIES

PRODUCT-RELEASE "MGX8850 Release 2.00,
                BPX SES Release 1.00."
STATUS          current
DESCRIPTION     "ATM MIB Capabilities"

SUPPORTS ATM-MIB
INCLUDES { atmInterfaceConfGroup2 }

VARIATION   atmInterfaceMaxVpcs
ACCESS      not-implemented
DESCRIPTION "Not supported."

VARIATION   atmInterfaceMaxVccs
ACCESS      not-implemented
DESCRIPTION "Not supported."

VARIATION   atmInterfaceConfVpcs
ACCESS      not-implemented
DESCRIPTION "Not supported."

VARIATION   atmInterfaceConfVccs
ACCESS      not-implemented
DESCRIPTION "Not supported."

VARIATION   atmInterfaceMaxActiveVpiBits
ACCESS      not-implemented
DESCRIPTION "Not supported."

VARIATION   atmInterfaceMaxActiveVciBits
ACCESS      not-implemented
DESCRIPTION "Not supported."

VARIATION   atmInterfaceIlmiVpi
ACCESS      not-implemented
DESCRIPTION "Not supported."

VARIATION   atmInterfaceIlmiVci
ACCESS      not-implemented
DESCRIPTION "Not supported."

VARIATION   atmInterfaceMyNeighborIpAddress
ACCESS      read-only
DESCRIPTION "Write access is not supported."

VARIATION   atmInterfaceMyNeighborIfName
ACCESS      read-only
DESCRIPTION "Write access is not supported."

VARIATION   atmInterfaceCurrentMaxVpiBits
ACCESS      not-implemented
DESCRIPTION "Not supported."

VARIATION   atmInterfaceCurrentMaxVciBits
ACCESS      not-implemented
DESCRIPTION "Not supported."

VARIATION   atmInterfaceSubscrAddress
ACCESS      not-implemented
DESCRIPTION "Not supported."

    ::= { ciscoAtmCapability 1 }

END