CISCO-ATM-CELL-LAYER-MIB device MIB details by Cisco

CISCO-ATM-CELL-LAYER-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-ATM-CELL-LAYER-MIB.

Vendor:	Cisco
Mib:	CISCO-ATM-CELL-LAYER-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- ciscoAtmCellLayer MIB
--
-- March 1999, Shilpa Kale
--
-- May 2000, Prashant Desai
--
-- April 2002, Sundar Ramamoorthy, Prasanna Mucharikar
--
-- Copyright (c) 1998, 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
 
CISCO-ATM-CELL-LAYER-MIB DEFINITIONS ::= BEGIN
IMPORTS
      MODULE-IDENTITY, 
      Counter32,
      Counter64,
      Integer32,
      OBJECT-TYPE, 
      Gauge32,
      Unsigned32      FROM SNMPv2-SMI
      MODULE-COMPLIANCE,
      OBJECT-GROUP    FROM SNMPv2-CONF
      TruthValue      FROM SNMPv2-TC
      ifIndex         FROM IF-MIB 
      ciscoMgmt       FROM CISCO-SMI;

ciscoAtmCellLayerMIB MODULE-IDENTITY
    LAST-UPDATED  "200206280000Z"
    ORGANIZATION  "Cisco Systems, Inc."
    CONTACT-INFO
                  "Cisco Systems
                   Customer Service
    
          Postal : 170 W Tasman Drive
                   San Jose, CA  95134
                   USA
             Tel : +1 800 553-NETS
          E-mail : cs-wanatm@cisco.com"
    DESCRIPTION
       "The MIB module to describe ATM cell layer objects and statistics
        of a physical line."

    REVISION "200206280000Z"
    DESCRIPTION
        "1. Added following objects to caclStatsTable, as 
            upper 32-bits for 64-bit wide counters:
            caclHighInRcvCLP0Cells, caclHighInRcvCLP1Cells,
            caclHighInValidOAMCells, caclHighInVpiVciErrCells,
            caclHighInXmtCLP0Cells, caclHighInXmtCLP1Cells,
            caclHighInHecErrDiscCells, caclHighInHecErrCorrectedCells,
            caclHighOutXmtCLP0Cells, caclHighOutXmtCLP1Cells,
            caclHighOutValidOAMCells, caclHighOutRcvCLP0Cells,
            caclHighOutRcvCLP1Cells.
         2. Added caclXStatsTable which contains 64-bits wide
            counters.
         3. Added following objects to caclIntervalStatsTable, as 
            upper 32-bits for 64-bit wide counters:
            caclHighIntervalInRcvCLP0Cells, 
            caclHighIntervalInRcvCLP1Cells,
            caclHighIntervalInVpiVciErrCells,
            caclHighIntervalInXmtCLP0Cells,
            caclHighIntervalInXmtCLP1Cells,
            caclHighIntervalInHecErrDiscCells,
            caclHighIntervalInHecErrCorrCells,
            caclHighIntervalOutXmtCLP0Cells,
            caclHighIntervalOutXmtCLP1Cells,
            caclHighIntervalOutVpiVciErrCells,
            caclHighIntervalOutRcvCLP0Cells,
            caclHighIntervalOutRcvCLP1Cells.
         4. Added caclXIntervalStatsTable which contains 64-bits 
            wide counters.
         5. Changed IMPORT for Unsigned32 to SNMPv2-SMI, instead 
            of CISCO-TC."

    REVISION "200005020000Z"
    DESCRIPTION
       "Changes made to this MIB module are as follows
        
        (1) Added interval statistic table. 

        (2) Corrected some of the typographical errors in description of 
            certain published objects."
    REVISION      "9905030000Z"
    DESCRIPTION
            "The initial version of this MIB module."
::= { ciscoMgmt 133 }

ciscoAtmCellLayerMIBObjects    OBJECT IDENTIFIER ::= { ciscoAtmCellLayerMIB 1}
caclConfig              OBJECT IDENTIFIER ::= { ciscoAtmCellLayerMIBObjects 1}
caclStats               OBJECT IDENTIFIER ::= { ciscoAtmCellLayerMIBObjects 2}

-- ---------------------------------------------------------------------
--
-- Atm Cell Layer Config Group
--
-- ---------------------------------------------------------------------
caclConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF CaclConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
       "The  Atm cell layer configuration table. 
        An entry in this table is automatically created for each entry 
        in the ifTable which has an ifType of atm(37), and which is
        layered on top of a SONET,DS3 or DS1 interface on the ATM switch."
     ::= { caclConfig 1 }

caclConfigEntry OBJECT-TYPE
    SYNTAX CaclConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
       "An entry in the caclConfigTable. The table is indexed by the 
        ifIndex of the atm(37) interface."
    INDEX   { ifIndex }
     ::= { caclConfigTable 1 }

CaclConfigEntry ::=
    SEQUENCE {
             caclNullCellHeader             OCTET STRING,
             caclNullCellPayload            Unsigned32,
             caclHecCosetEnable             TruthValue,
             caclPayloadScramblingEnable    TruthValue,
             caclTimeElapsed                INTEGER,
             caclValidIntervals             INTEGER,
             caclInvalidIntervals           INTEGER     
             } 
 
caclNullCellHeader OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(4)) 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "The first four bytes of the ATM header to be used for
        Null cells. Generally, idle cells are inserted into a cell
        stream as a mechanism for rate adaptation between the ATM 
        data link layer and the physical layer. The header fields:
        Generic flow control,Payload type and Cell Loss Priority can 
        be specified in the value of this object. It applies to both
        transmitted as well as received cells."
    REFERENCE
       "ITU-T Recomendation I.432"   
    ::= { caclConfigEntry 1 }

caclNullCellPayload OBJECT-TYPE
    SYNTAX  Unsigned32  (0..255)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "Null cell Payload definition. The idle cell
        information field can be specified in this object. It applies
        to both transmitted as well as received cells.
        The default value is 0x6A."
    REFERENCE
       "ITU-T Recomendation I.432"   
    DEFVAL { '6A'h }
    ::= { caclConfigEntry 2 }

caclHecCosetEnable OBJECT-TYPE
    SYNTAX  TruthValue  
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "If enabled, the algorithm of Coset Polynomial Addition is applied
        to do header error check calculations. 
        It applies to transmitted as well as received cells."
    REFERENCE
       "ITU-T Recomendation I.432"   
    DEFVAL { true }
    ::= { caclConfigEntry 3 }

caclPayloadScramblingEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "An indication of whether Payload Scrambling is enabled."
    REFERENCE
       "ITU-T Recomendation I.432"
    DEFVAL { true }
    ::= { caclConfigEntry 4 }

caclTimeElapsed OBJECT-TYPE
    SYNTAX  INTEGER (0..899)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "The number of seconds that have elapsed since the
        beginning of the near end current error-
        measurement period.  If, for some reason, such as
        an adjustment in the system's time-of-day clock,
        the current interval exceeds the maximum value,
        the agent will return the maximum value."
    ::= { caclConfigEntry 5 }

caclValidIntervals OBJECT-TYPE
    SYNTAX  INTEGER (0..96)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "The number of previous near end intervals for
        which data was collected.  The value will be
        96 unless the interface was brought online within
        the last 24 hours, in which case the value will be
        the number of complete 15 minute near end
        intervals since the interface has been online.  In
        the case where the agent is a proxy, it is
        possible that some intervals are unavailable.  In
        this case, this interval is the maximum interval
        number for which data is available."
    ::= { caclConfigEntry 6 }

caclInvalidIntervals OBJECT-TYPE        
     SYNTAX  INTEGER (0..96)
     MAX-ACCESS  read-only
     STATUS  current
     DESCRIPTION
        "The number of near end intervals in the range from 0 to
         caclValidIntervals for which no data is
         available.  This object will typically be zero
         except in cases where the data for some intervals
         are not available (e.g., in proxy situations)."
    ::= { caclConfigEntry 7 }

-- --------------------------------------------------------------------
--
--      ATM Cell layer statistics Group
--
-- --------------------------------------------------------------------

caclStatsTable OBJECT-TYPE
       SYNTAX  SEQUENCE OF CaclStatsEntry
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION 
          "The ATM Cell layer stats table is for the cell layer over 
           a physical line. There is an entry for each SONET, DS3 or DS1 
           line. The table maintains objects that apply to ATM 
           end-systems, as well as objects that apply only to ATM switches.
           In all the following descriptions of objects,
           CLP-0 means Cell Loss Priority = 0, and
           CLP-1 means Cell Loss Priority = 1.
           ATM cells with CLP=0 have a higher priority in regard to cell
           loss than ATM cells with CLP=1.  Therefore, during resource
           congestions, CLP=1 cells are dropped before any CLP=0 cell is
           dropped.
           Ingress direction means coming from network to the switch.
           Egress direction means going from switch to the network."
   ::= { caclStats 1 }
 
caclStatsEntry  OBJECT-TYPE
        SYNTAX CaclStatsEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION 
           "An entry for the ATM Cell layer statistics for a physical 
            line. These are realtime statistics which are collected per
            cell layer over a physical line. Entries are created 
            automatically for each line.
            The table is indexed by the ifIndex value of the
            atm(37) interface."
        INDEX   { ifIndex}
        ::= { caclStatsTable 1 }        
 
CaclStatsEntry ::=
SEQUENCE {
       caclInRcvCLP0Cells            Counter32,
       caclInRcvCLP1Cells            Counter32,
       caclInValidOAMCells           Counter32,
       caclInErrOAMCells             Counter32,
       caclInGfcCells                Counter32,
       caclInVpiVciErrCells          Counter32,
       caclInLastUnknVpi             Integer32,
       caclInLastUnknVci             Integer32,
       caclInXmtCLP0Cells            Counter32,
       caclInXmtCLP1Cells            Counter32,
       caclInValidRMCells            Counter32,
       caclInRcvIdleCells            Counter32,
       caclInHecErrDiscCells         Counter32,
       caclInHecErrCorrectedCells    Counter32,
       caclInUpcCLP0DiscCells        Counter32,
       caclInUpcTotalDiscCells       Counter32,
       caclInUpcTotalNonCompCells    Counter32,
       caclOutXmtCLP0Cells           Counter32,
       caclOutXmtCLP1Cells           Counter32,
       caclOutValidOAMCells          Counter32,
       caclOutErrOAMCells            Counter32,
       caclOutVpiVciErrCells         Counter32,
       caclOutRcvCLP0Cells           Counter32,
       caclOutRcvCLP1Cells           Counter32,
       caclOutRcvValidRMCells        Counter32,
       caclOutRcvIdleCells           Counter32,
       caclHInRcvCLP0Cells           Counter64,
       caclHInRcvCLP1Cells           Counter64,
       caclHOutXmtCLP0Cells          Counter64,
       caclHOutXmtCLP1Cells          Counter64,
       caclHighInRcvCLP0Cells        Counter32,
       caclHighInRcvCLP1Cells        Counter32,
       caclHighInValidOAMCells       Counter32,
       caclHighInVpiVciErrCells      Counter32,
       caclHighInXmtCLP0Cells        Counter32,         
       caclHighInXmtCLP1Cells        Counter32,         
       caclHighInHecErrDiscCells     Counter32,
       caclHighInHecErrCorrectedCells Counter32,
       caclHighOutXmtCLP0Cells       Counter32,
       caclHighOutXmtCLP1Cells       Counter32,
       caclHighOutValidOAMCells      Counter32,
       caclHighOutRcvCLP0Cells       Counter32,                
       caclHighOutRcvCLP1Cells       Counter32  
      }
 
caclInRcvCLP0Cells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of cells received on the interface with
           CLP0 bit set."
       ::= {caclStatsEntry 1 }
 
caclInRcvCLP1Cells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of cells received on the interface with
           CLP1 bit set."
       ::= {caclStatsEntry 2 }
                
caclInValidOAMCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of valid Operation and Maintainance(OAM) cells 
           received  on the interface."
       ::= {caclStatsEntry 3 }

caclInErrOAMCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of errored OAM cells received on the interface."
       ::= {caclStatsEntry 4 }
 
caclInGfcCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of non-zero GFC  cells received on the interface."
       ::= {caclStatsEntry 5 }
 
caclInVpiVciErrCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of cells received from the interface 
           with unknown Vpi/Vci values."
       ::= { caclStatsEntry 6 }
 
caclInLastUnknVpi  OBJECT-TYPE
       SYNTAX Integer32 (0..4095) 
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The last unknown Vpi value. This object is valid only
           if 'caclInVpiVciErrCells' is non-zero." 
       ::= { caclStatsEntry 7 }
 
 
caclInLastUnknVci  OBJECT-TYPE
       SYNTAX Integer32 (0..65535) 
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The last unknown Vci value. This object is valid only
           if 'caclInVpiVciErrCells' is non-zero." 
       ::= { caclStatsEntry 8 }
 
caclInXmtCLP0Cells   OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of CLP0 cells received from the interface
            and transmitted to the switch fabric."
        ::= {caclStatsEntry 9 }
        
caclInXmtCLP1Cells   OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of CLP1 cells received from the interface
            and transmitted to the switch fabric."
        ::= {caclStatsEntry 10 }
                
caclInValidRMCells    OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of Valid RM cells received from the interface."
        ::= {caclStatsEntry 11 }
               
caclInRcvIdleCells     OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of idle cells received from the interface."
        ::= {caclStatsEntry 12 }
                
caclInHecErrDiscCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "Header Error Check (HEC) calculation is used to provide error
           detection and correction from the ATM cell header. This object
           is the number of received cells which were discarded because
           they had HEC errors."
       ::= { caclStatsEntry 13 }
 
caclInHecErrCorrectedCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of received cells which had HEC errors
           that were corrected."
       ::= { caclStatsEntry  14 }
 
caclInUpcCLP0DiscCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "In order to allocate resources fairly among different users, 
           networks police traffic at resource access points.  The traffic
           enforcement or policing taken at a UNI is called Usage Parameter
           Control (UPC). This is the counter associated with the number
           of CLP0 cells discarded due to policing."
       ::= { caclStatsEntry 15 }
 
caclInUpcTotalDiscCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The total number of cells(CLP0+1) discarded due to policing."
       ::= { caclStatsEntry 16 }
 
caclInUpcTotalNonCompCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of non-compliant cells (cells that are not compliant
           to a specific traffic profile) discarded due to policing."
       ::= { caclStatsEntry 17 }
 
caclOutXmtCLP0Cells   OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of CLP0 cells transmitted to interface."
       ::= { caclStatsEntry 18 }
 
caclOutXmtCLP1Cells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of CLP1 cells transmitted to interface."
       ::= { caclStatsEntry 19 }
 
 
caclOutValidOAMCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of Operartion and Maintainance(OAM) cells received 
           by the interface from the switch fabric."
       ::= {caclStatsEntry 20 }
 
caclOutErrOAMCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of errored OAM cells received by the interface 
           from the switch fabric."
       ::= {caclStatsEntry 21 }
 
caclOutVpiVciErrCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of cells with unknown vpi vci value in
           received by the interface from the switch fabric."
       ::= {caclStatsEntry 22 }
 
caclOutRcvCLP0Cells     OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of CLP0 cells received by the interface
            from the switch fabric." 
        ::= {caclStatsEntry 23 }
                
caclOutRcvCLP1Cells   OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only   
        STATUS  current
        DESCRIPTION
           "The number of CLP1 cells received by the interface
            from the switch fabric."
        ::= {caclStatsEntry 24 }
                
caclOutRcvValidRMCells  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of Valid RM cells received by the interface
            from the switch fabric."
        ::= {caclStatsEntry 25 }
    
caclOutRcvIdleCells     OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "The number of idle cells received by the interface
        from the switch fabric."
    ::= {caclStatsEntry 26 }
    
caclHInRcvCLP0Cells  OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64-bit version of caclInRcvCLP0Cells."
       ::= {caclStatsEntry 27 }
 
caclHInRcvCLP1Cells  OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64-bit version of caclnRcvCLP1Cells."
       ::= {caclStatsEntry 28 }
  
caclHOutXmtCLP0Cells    OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The 64-bit version of caclOutXmtCLP0Cells."
        ::= {caclStatsEntry 29 }
                
caclHOutXmtCLP1Cells   OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only   
        STATUS  current
        DESCRIPTION
           "The 64-bit version of caclOutXmtCLP1Cells."
        ::= {caclStatsEntry 30 }

 
caclHighInRcvCLP0Cells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The upper 32 bit of the number of cells received on the 
          interface with CLP0 bit set."
       ::= {caclStatsEntry 31 }
 
caclHighInRcvCLP1Cells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The upper 32 bit of the number of cells received on the 
          interface with CLP1 bit set."
       ::= {caclStatsEntry 32 }
                
caclHighInValidOAMCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The upper 32 bit of the number of valid Operation and 
          Maintainance(OAM) cells received  on the interface."
       ::= {caclStatsEntry 33 }

 
caclHighInVpiVciErrCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The upper 32 bit of the number of cells received from the 
          interface with unknown Vpi/Vci values."
       ::= { caclStatsEntry 34 }

caclHighInXmtCLP0Cells   OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The upper 32 bit of the number of CLP0 cells received from 
           the interface and transmitted to the switch fabric."
        ::= {caclStatsEntry 35 }
        
caclHighInXmtCLP1Cells   OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The upper 32 bit of the number of CLP1 cells received from 
           the interface and transmitted to the switch fabric."
        ::= {caclStatsEntry 36 }

caclHighInHecErrDiscCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "Header Error Check (HEC) calculation is used to provide error
           detection and correction from the ATM cell header. This 
           object is the upper 32 bit of the number of received cells 
           which were discarded because they had HEC errors."
       ::= { caclStatsEntry  37 }
 
caclHighInHecErrCorrectedCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The upper 32 bit of the number of received cells which had 
           HEC errors that were corrected."
       ::= { caclStatsEntry  38 }

caclHighOutXmtCLP0Cells   OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The upper 32 bit of the number of CLP0 cells transmitted to 
          interface."
       ::= { caclStatsEntry 39 }
 
caclHighOutXmtCLP1Cells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The upper 32 bit of the number of CLP1 cells transmitted to 
          interface."
       ::= { caclStatsEntry  40 }
 
 
caclHighOutValidOAMCells  OBJECT-TYPE
       SYNTAX  Counter32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The upper 32 bit of the  number of Operartion and 
          Maintainance(OAM) cells received by the interface from the 
          switch fabric."
       ::= {caclStatsEntry 41 }

caclHighOutRcvCLP0Cells     OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The upper 32 bit of the number of CLP0 cells received by 
           the interface from the switch fabric." 
        ::= {caclStatsEntry 42 }
                
caclHighOutRcvCLP1Cells   OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only   
        STATUS  current
        DESCRIPTION
           "The upper 32 bit of the number of CLP1 cells received by 
           the interface from the switch fabric."
        ::= {caclStatsEntry 43 }

-- --------------------------------------------------------------------
--
--      ATM Cell layer interval statistics
--  
-- --------------------------------------------------------------------

caclIntervalStatsTable OBJECT-TYPE
   SYNTAX  SEQUENCE OF CaclIntervalStatsEntry
   MAX-ACCESS  not-accessible
   STATUS  current
   DESCRIPTION 
      "The ATM Cell layer interval stats table. This table contains 
       statistics for the current (incomplete) interval and upto
       96 previous (completed) 15-minute intervals."
   ::= { caclStats 2 }
 
caclIntervalStatsEntry  OBJECT-TYPE
        SYNTAX CaclIntervalStatsEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION 
           "An entry for the ATM Cell layer interval statistics for a 
            physical line. Entries are created automatically for each 
            line. The table is indexed by the ifIndex and interval 
            number. Interval number 0 is the current interval being 
            collected."
        INDEX   { ifIndex, caclIntervalNumber }
        ::= { caclIntervalStatsTable 1 }        
 
CaclIntervalStatsEntry ::=
    SEQUENCE {
       caclIntervalNumber                    INTEGER,
       caclIntervalInRcvCLP0Cells            Gauge32,
       caclIntervalInRcvCLP1Cells            Gauge32,
       caclIntervalInValidOAMCells           Gauge32,
       caclIntervalInErrOAMCells             Gauge32,
       caclIntervalInGfcCells                Gauge32,
       caclIntervalInVpiVciErrCells          Gauge32,
       caclIntervalInLastUnknVpi             Integer32,
       caclIntervalInLastUnknVci             Integer32,
       caclIntervalInXmtCLP0Cells            Gauge32,
       caclIntervalInXmtCLP1Cells            Gauge32,
       caclIntervalInValidRMCells            Gauge32,
       caclIntervalInRcvIdleCells            Gauge32,
       caclIntervalInHecErrDiscCells         Gauge32,
       caclIntervalInHecErrCorrCells         Gauge32,
       caclIntervalInUpcCLP0DiscCells        Gauge32,
       caclIntervalInUpcTotalDiscCells       Gauge32,
       caclIntervalInUpcTotNonCmpCells       Gauge32,
       caclIntervalOutXmtCLP0Cells           Gauge32,
       caclIntervalOutXmtCLP1Cells           Gauge32,
       caclIntervalOutValidOAMCells          Gauge32,
       caclIntervalOutErrOAMCells            Gauge32,
       caclIntervalOutVpiVciErrCells         Gauge32,
       caclIntervalOutRcvCLP0Cells           Gauge32,
       caclIntervalOutRcvCLP1Cells           Gauge32,
       caclIntervalOutRcvValidRMCells        Gauge32,
       caclIntervalOutRcvIdleCells           Gauge32,
       caclHighIntervalInRcvCLP0Cells        Gauge32,
       caclHighIntervalInRcvCLP1Cells        Gauge32,
       caclHighIntervalInVpiVciErrCells      Gauge32,
       caclHighIntervalInXmtCLP0Cells        Gauge32,
       caclHighIntervalInXmtCLP1Cells        Gauge32,
       caclHighIntervalInHecErrDiscCells     Gauge32,
       caclHighIntervalInHecErrCorrCells     Gauge32,       
       caclHighIntervalOutXmtCLP0Cells       Gauge32,
       caclHighIntervalOutXmtCLP1Cells       Gauge32,
       caclHighIntervalOutVpiVciErrCells     Gauge32,
       caclHighIntervalOutRcvCLP0Cells       Gauge32,
       caclHighIntervalOutRcvCLP1Cells       Gauge32
      }

caclIntervalNumber OBJECT-TYPE
        SYNTAX  INTEGER (0..96)
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
          "A number between 0 and 96, where 1 is the most
           recently completed 15 minute interval and 96 is
           the 15 minutes interval completed 23 hours and 45
           minutes prior to interval 1. 0 means the current
           interval being collected."
        ::= { caclIntervalStatsEntry 1 }

 
caclIntervalInRcvCLP0Cells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of cells received on the interface with
           CLP0 bit set during 15 minute interval."
       ::= { caclIntervalStatsEntry 2 }
 
caclIntervalInRcvCLP1Cells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of cells received on the interface with
           CLP1 bit set during 15 minute interval."
       ::= { caclIntervalStatsEntry 3 }
                
caclIntervalInValidOAMCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of valid Operation and Maintainance(OAM) cells 
           received  on the interface during 15 minute interval."
       ::= { caclIntervalStatsEntry 4 }

caclIntervalInErrOAMCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of errored OAM cells received on the interface
           during 15 minute interval."
       ::= { caclIntervalStatsEntry 5 }
 
caclIntervalInGfcCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of non-zero GFC  cells received on the interface
             during 15 minute interval."
       ::= { caclIntervalStatsEntry 6 }
 
caclIntervalInVpiVciErrCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of cells received from the interface 
           with unknown Vpi/Vci values during 15 minute interval."
       ::= { caclIntervalStatsEntry 7 }
 
caclIntervalInLastUnknVpi  OBJECT-TYPE
       SYNTAX Integer32 (0..4095) 
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The last unknown Vpi value during 15 minute interval.
           This object is valid only if the value of 
           'caclIntervalInVpiVciErrCells' for the same interval 
           is non-zero." 
       ::= { caclIntervalStatsEntry 8 }
 
caclIntervalInLastUnknVci  OBJECT-TYPE
       SYNTAX Integer32 (0..65535) 
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The last unknown Vci value during 15 minute interval.
           This object is valid only if the value of
           'caclIntervalInVpiVciErrCells' for the same interval
           is non-zero." 
       ::= { caclIntervalStatsEntry 9 }
 
caclIntervalInXmtCLP0Cells   OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of CLP0 cells received from the interface
            and transmitted to the switch fabric during 15 minute
            interval."
        ::= {caclIntervalStatsEntry 10 }
        
caclIntervalInXmtCLP1Cells   OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of CLP1 cells received from the interface
            and transmitted to the switch fabric during 15 minute
            interval."
        ::= {caclIntervalStatsEntry 11 }
                
caclIntervalInValidRMCells    OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of Valid RM cells received from the interface
             during 15 minute interval."
        ::= {caclIntervalStatsEntry 12 }
               
caclIntervalInRcvIdleCells     OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of idle cells received from the interface
             during 15 minute interval."
        ::= {caclIntervalStatsEntry 13 }
                
caclIntervalInHecErrDiscCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "This object is the number of received cells which were 
           discarded because they had HEC errors during 15 minute 
           interval."
       ::= { caclIntervalStatsEntry 14 }
 
caclIntervalInHecErrCorrCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of received cells which had HEC errors
           that were corrected during 15 minute interval."
       ::= { caclIntervalStatsEntry  15 }
 
caclIntervalInUpcCLP0DiscCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "This is the counter associated with the number of CLP0
           cells discarded due to policing during 15 minute interval."
       ::= { caclIntervalStatsEntry 16 }
 
caclIntervalInUpcTotalDiscCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The total number of cells(CLP0+1) discarded due to policing
           during 15 minute interval."
       ::= { caclIntervalStatsEntry 17 }
 
caclIntervalInUpcTotNonCmpCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of non-compliant cells (cells that are not 
           compliant to a specific traffic profile) discarded due to 
           policing during 15 minute interval."
       ::= { caclIntervalStatsEntry 18 }
 
caclIntervalOutXmtCLP0Cells   OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of CLP0 cells transmitted to interface during 
           15 minute interval."
       ::= { caclIntervalStatsEntry 19 }
 
caclIntervalOutXmtCLP1Cells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of CLP1 cells transmitted to interface during 
           15 minute interval."
       ::= { caclIntervalStatsEntry 20 }
  
caclIntervalOutValidOAMCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of Operartion and Maintainance(OAM) cells received 
           by the interface from the switch fabric during 15 minute 
           interval."
       ::= { caclIntervalStatsEntry 21 }
 
caclIntervalOutErrOAMCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of errored OAM cells received by the interface 
           from the switch fabric during 15 minute interval."
       ::= { caclIntervalStatsEntry 22 }
 
caclIntervalOutVpiVciErrCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of cells with unknown vpi vci value in
           received by the interface from the switch fabric 
           during 15 minute interval."
       ::= { caclIntervalStatsEntry 23 }
 
caclIntervalOutRcvCLP0Cells     OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of CLP0 cells received by the interface
            from the switch fabric during 15 minute interval." 
        ::= { caclIntervalStatsEntry 24 }
                
caclIntervalOutRcvCLP1Cells   OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only   
        STATUS  current
        DESCRIPTION
           "The number of CLP1 cells received by the interface
            from the switch fabric during 15 minute interval."
        ::= { caclIntervalStatsEntry 25 }
                
caclIntervalOutRcvValidRMCells  OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of Valid RM cells received by the interface
            from the switch fabric during 15 minute interval."
        ::= { caclIntervalStatsEntry 26 }
    
caclIntervalOutRcvIdleCells     OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of idle cells received by the interface
            from the switch fabric during 15 minute interval."
        ::= { caclIntervalStatsEntry 27 }

caclHighIntervalInRcvCLP0Cells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The Upper 32 bit of the number of cells received on the 
           interface with CLP0 bit set during 15 minute interval."
       ::= { caclIntervalStatsEntry 28 }
 
caclHighIntervalInRcvCLP1Cells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The Upper 32 bit of the number of cells received on the 
           interface with CLP1 bit set during 15 minute interval."
       ::= { caclIntervalStatsEntry 29 }

caclHighIntervalInVpiVciErrCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The Upper 32 bit of the number of cells received from the 
           interface with unknown Vpi/Vci values during 15 minute 
           interval."
       ::= { caclIntervalStatsEntry 30 }

caclHighIntervalInXmtCLP0Cells   OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The Upper 32 bit of the number of CLP0 cells received 
            from the interface  and transmitted to the switch fabric 
            during 15 minute interval."
        ::= {caclIntervalStatsEntry 31 }
        
caclHighIntervalInXmtCLP1Cells   OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The Upper 32 bit of the number of CLP1 cells received 
            from the interface and transmitted to the switch fabric 
            during 15 minute interval."
        ::= {caclIntervalStatsEntry 32 }

caclHighIntervalInHecErrDiscCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "This object is the Upper 32 bit of the number of 
           received cells which were discarded because they had
           HEC errors during 15 minute interval."
       ::= { caclIntervalStatsEntry 33 }
 
caclHighIntervalInHecErrCorrCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of received cells which had HEC errors
           that were corrected during 15 minute interval."
       ::= { caclIntervalStatsEntry  34 }

caclHighIntervalOutXmtCLP0Cells   OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of CLP0 cells transmitted to interface during 15 
           minute interval."
       ::= { caclIntervalStatsEntry 35 }
 
caclHighIntervalOutXmtCLP1Cells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The number of CLP1 cells transmitted to interface during 15 
           minute interval."
       ::= { caclIntervalStatsEntry 36 }

 caclHighIntervalOutVpiVciErrCells  OBJECT-TYPE
       SYNTAX  Gauge32
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  number of cells with unknown vpi vci value in
           received by the interface from the switch fabric 
           during 15 minute interval."
       ::= { caclIntervalStatsEntry 37 }
 
caclHighIntervalOutRcvCLP0Cells     OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The number of CLP0 cells received by the interface
            from the switch fabric during 15 minute interval." 
        ::= { caclIntervalStatsEntry 38 }
                
caclHighIntervalOutRcvCLP1Cells   OBJECT-TYPE
        SYNTAX  Gauge32
        MAX-ACCESS  read-only   
        STATUS  current
        DESCRIPTION
           "The number of CLP1 cells received by the interface
            from the switch fabric during 15 minute interval."
        ::= { caclIntervalStatsEntry 39 }

--   Extension to the caclStatsTable table

caclXStatsTable OBJECT-TYPE
       SYNTAX  SEQUENCE OF CaclXStatsEntry
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION 
          "The ATM Cell layer stats table is for the cell layer over 
           a physical line. There is an entry for each SONET, DS3 or 
           DS1 line. The table maintains objects that apply to ATM 
           end-systems, as well as objects that apply only to ATM 
           switches.
           In all the following descriptions of objects,
           CLP-0 means Cell Loss Priority = 0, and
           CLP-1 means Cell Loss Priority = 1.
           ATM cells with CLP=0 have a higher priority in regard to cell
           loss than ATM cells with CLP=1.  Therefore, during resource
           congestions, CLP=1 cells are dropped before any CLP=0 cell is
           dropped.
           Ingress direction means coming from network to the switch.
           Egress direction means going from switch to the network."
   ::= { caclStats 3 }
 
caclXStatsEntry  OBJECT-TYPE
        SYNTAX CaclXStatsEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION 
           "An entry for the ATM Cell layer statistics for a physical 
            line. These are realtime statistics which are collected per
            cell layer over a physical line. Entries are created 
            automatically for each line.
            The table is indexed by the ifIndex value of the
            atm(37) interface."
        AUGMENTS    {caclStatsEntry}	    
        ::= { caclXStatsTable 1 }        
 
CaclXStatsEntry ::=
SEQUENCE {
       caclHCInValidOAMCells         Counter64,
       caclHCInVpiVciErrCells        Counter64,
       caclHCInXmtCLP0Cells          Counter64,         
       caclHCInXmtCLP1Cells          Counter64,         
       caclHCInHecErrDiscCells       Counter64,
       caclHCInHecErrCorrectedCells  Counter64,
       caclHCOutValidOAMCells        Counter64,
       caclHCOutRcvCLP0Cells         Counter64,                
       caclHCOutRcvCLP1Cells         Counter64 
}

caclHCInValidOAMCells  OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64 bit version of the number of valid Operation 
           and Maintainance(OAM) cells received  on the interface."
       ::= {caclXStatsEntry 1 }

 
caclHCInVpiVciErrCells   OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64 bit version of the number of cells received from the 
           interface with unknown Vpi/Vci values."
       ::= { caclXStatsEntry 2 }

caclHCInXmtCLP0Cells   OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The 64 bit version of the number of CLP0 cells received 
            from the interface and transmitted to the switch fabric."
        ::= {caclXStatsEntry 3 }
        
caclHCInXmtCLP1Cells   OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The 64 bit version of the number of CLP1 cells received 
            from the interface and transmitted to the switch 
            fabric."
        ::= {caclXStatsEntry 4 }

caclHCInHecErrDiscCells  OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "Header Error Check (HEC) calculation is used to provide 
           error detection and correction from the ATM cell header. 
           This object is 64 bit version of the the number of 
           received cells which were discarded because they had 
           HEC errors."
       ::= { caclXStatsEntry  5 }
 
caclHCInHecErrCorrectedCells  OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64 bit version of thenumber of received cells which had 
           HEC errors that were corrected."
       ::= { caclXStatsEntry   6 }
 
caclHCOutValidOAMCells  OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  64 bit version of the number of Operartion and 
           Maintainance(OAM) cells received by the interface from the 
           switch fabric."
       ::= {caclXStatsEntry  7 }

caclHCOutRcvCLP0Cells     OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The 64 bit version of the number of CLP0 cells received by 
            the interface from the switch fabric." 
        ::= {caclXStatsEntry  8 }
                
caclHCOutRcvCLP1Cells   OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only   
        STATUS  current
        DESCRIPTION
           "The 64 bit version of the number of CLP1 cells received by 
            the interface from the switch fabric."
        ::= {caclXStatsEntry  9 }

 
--   Extension to the caclIntervalStatsTable

caclXIntervalStatsTable OBJECT-TYPE
   SYNTAX  SEQUENCE OF CaclXIntervalStatsEntry
   MAX-ACCESS  not-accessible
   STATUS  current
   DESCRIPTION 
      "The ATM Cell layer interval stats table. This table contains 
       statistics for the current (incomplete) interval and upto
       96 previous (completed) 15-minute intervals."
   ::= { caclStats 4 }
 
caclXIntervalStatsEntry  OBJECT-TYPE
        SYNTAX CaclXIntervalStatsEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION 
           "An entry for the ATM Cell layer interval statistics for a 
            physical line. Entries are created automatically for each 
            line. The table is indexed by the ifIndex and interval 
            number. Interval number 0 is the current interval being 
            collected."
        INDEX   { ifIndex, caclIntervalNumber }
        ::= { caclXIntervalStatsTable 1 }        
 
CaclXIntervalStatsEntry ::=
    SEQUENCE {
       caclHCIntervalInRcvCLP0Cells          Counter64,
       caclHCIntervalInRcvCLP1Cells          Counter64,
       caclHCIntervalInVpiVciErrCells        Counter64,
       caclHCIntervalInXmtCLP0Cells          Counter64,
       caclHCIntervalInXmtCLP1Cells          Counter64,
       caclHCIntervalInHecErrDiscCells       Counter64,
       caclHCIntervalInHecErrCorrCells       Counter64,       
       caclHCIntervalOutXmtCLP0Cells         Counter64,
       caclHCIntervalOutXmtCLP1Cells         Counter64,
       caclHCIntervalOutVpiVciErrCells       Counter64,
       caclHCIntervalOutRcvCLP0Cells         Counter64,
       caclHCIntervalOutRcvCLP1Cells         Counter64   
}
      
caclHCIntervalInRcvCLP0Cells     OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64 bit version of the number of cells received on the 
           interface with CLP0 bit set during 15 minute interval."
       ::= { caclXIntervalStatsEntry  1 }
 
caclHCIntervalInRcvCLP1Cells   OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64 bit version of the number of cells received on the 
           interface with CLP1 bit set during 15 minute interval."
       ::= { caclXIntervalStatsEntry  2 }

caclHCIntervalInVpiVciErrCells   OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64 bit version of the number of cells received from the 
           interface with unknown Vpi/Vci values during 15 minute 
           interval."
       ::= { caclXIntervalStatsEntry  3 }

caclHCIntervalInXmtCLP0Cells   OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The 64 bit version of the number of CLP0 cells received 
            from the interface and transmitted to the switch fabric 
            during 15 minute interval."
        ::= {caclXIntervalStatsEntry 4 }
        
caclHCIntervalInXmtCLP1Cells   OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The 64 bit version of the number of CLP1 cells received 
            from the interface and transmitted to the switch fabric 
            during 15 minute interval."
        ::= {caclXIntervalStatsEntry  5 }

caclHCIntervalInHecErrDiscCells  OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "This object is the 64 bit version of the number of 
           received cells which were discarded because they had HEC 
           errors during 15 minute interval."
       ::= { caclXIntervalStatsEntry  6 }
 
caclHCIntervalInHecErrCorrCells  OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64 bit version of the number of received cells which 
           had HEC errors that were corrected during 15 minute 
           interval."
       ::= { caclXIntervalStatsEntry   7 }

caclHCIntervalOutXmtCLP0Cells   OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64 bit version of the number of CLP0 cells transmitted 
           to interface during 15 minute interval."
       ::= { caclXIntervalStatsEntry  8 }
 
caclHCIntervalOutXmtCLP1Cells  OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The 64 bit version of the number of CLP1 cells transmitted 
           to interface during 15 minute interval."
       ::= { caclXIntervalStatsEntry   9 }

 
caclHCIntervalOutVpiVciErrCells  OBJECT-TYPE
       SYNTAX  Counter64
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "The  64 bit version of the number of cells with unknown vpi 
           vci value in  received by the interface from the switch 
           fabric during 15 minute interval."
       ::= { caclXIntervalStatsEntry   10 }
 
caclHCIntervalOutRcvCLP0Cells     OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "The 64 bit version of the number of CLP0 cells received by 
            the interfacefrom the switch fabric during 15 minute 
            interval." 
        ::= { caclXIntervalStatsEntry  11 }
                
caclHCIntervalOutRcvCLP1Cells   OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only   
        STATUS  current
        DESCRIPTION
           "The 64 bit version of the number of CLP1 cells received by 
            the interface from the switch fabric during 15 minute 
            interval."
        ::= { caclXIntervalStatsEntry 12 }

 -- conformance information
 
caclMIBConformance OBJECT IDENTIFIER ::= {ciscoAtmCellLayerMIBObjects 3}

caclMIBCompliances OBJECT IDENTIFIER
     ::= {caclMIBConformance 1}
caclMIBGroups  OBJECT IDENTIFIER
     ::= {caclMIBConformance 2}

caclMIBCompliance MODULE-COMPLIANCE
    STATUS deprecated -- replaced by caclMIBCompliance1
    DESCRIPTION
       "The Compliance statement for the Cisco ATM Cell layer MIB."
    MODULE -- this module
    MANDATORY-GROUPS { caclMIBGroup }
    GROUP caclATMSwitchStatsMIBGroup
    DESCRIPTION
       "Required if the system is an ATM switch."
    GROUP caclATMEndSyatemStatsMIBGroup
    DESCRIPTION
       "Required if the system is an End System."
    GROUP caclHighSpeedATMMIBGroup
    DESCRIPTION
       "Required if the system has interface speed of OC12 or higher."
    ::= {caclMIBCompliances 1}
 

caclMIBCompliance1 MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
       "The Compliance statement for the Cisco ATM Cell layer MIB."
    MODULE -- this module
    MANDATORY-GROUPS { caclMIBGroup }
    GROUP caclATMSwitchStatsMIBGroup1
    DESCRIPTION
       "Required if the system is an ATM switch."
    GROUP caclATMStatsMIBGroup
    DESCRIPTION
       "Required if the system is an ATM switch or an End System."
    GROUP caclHighSpeedATMMIBGroup1
    DESCRIPTION
       "Required if the system has interface speed of OC12 or higher."  
    GROUP caclIntervalStatsMIBGroup1
    DESCRIPTION
       "Required if the system supports interval statistics."
    GROUP caclHCIntervalStatsMIBGroup
    DESCRIPTION
       "Required if the system supports interval statistics and has 
       interface speed of OC12 or higher."
    ::= {caclMIBCompliances 2}
  
-- units of conformance
caclMIBGroup OBJECT-GROUP
        OBJECTS { 
                 caclNullCellHeader,      
                 caclNullCellPayload,
                 caclHecCosetEnable,  
                 caclPayloadScramblingEnable
                 }
       STATUS current
       DESCRIPTION
          "A collection of objects which provide ATM cell layer configuration
           parmeters."
       ::= { caclMIBGroups 1}

caclATMSwitchStatsMIBGroup OBJECT-GROUP
        OBJECTS {
            caclInRcvCLP0Cells,
            caclInRcvCLP1Cells,
            caclInValidOAMCells,
            caclInErrOAMCells,
            caclInGfcCells,
            caclInVpiVciErrCells,
            caclInLastUnknVpi,
            caclInLastUnknVci,
            caclInXmtCLP0Cells,         
            caclInXmtCLP1Cells,         
            caclInValidRMCells,         
            caclInRcvIdleCells,         
            caclInHecErrDiscCells,
            caclInHecErrCorrectedCells,
            caclInUpcCLP0DiscCells,
            caclInUpcTotalDiscCells,
            caclInUpcTotalNonCompCells,
            caclOutXmtCLP0Cells,
            caclOutXmtCLP1Cells,
            caclOutValidOAMCells,
            caclOutErrOAMCells,
            caclOutVpiVciErrCells,
            caclOutRcvCLP0Cells,                
            caclOutRcvCLP1Cells,                
            caclOutRcvValidRMCells,
            caclOutRcvIdleCells
            }
       STATUS deprecated -- replaced by caclATMStatsMIBGroup and
                         -- caclATMSwitchStatsMIBGroup1
       DESCRIPTION
          "A collection of objects which provide statistics for ATM switch
           interfaces."
       ::= { caclMIBGroups 2}
      
caclATMEndSyatemStatsMIBGroup OBJECT-GROUP
        OBJECTS {
            caclInRcvCLP0Cells,
            caclInRcvCLP1Cells,
            caclInValidOAMCells,
            caclInErrOAMCells,
            caclInGfcCells,
            caclInVpiVciErrCells,
            caclInLastUnknVpi,
            caclInLastUnknVci,
            caclInValidRMCells,         
            caclInRcvIdleCells,         
            caclInHecErrDiscCells,
            caclInHecErrCorrectedCells,
            caclInUpcCLP0DiscCells,
            caclInUpcTotalDiscCells,
            caclInUpcTotalNonCompCells,
            caclOutXmtCLP0Cells,
            caclOutXmtCLP1Cells,
            caclOutValidOAMCells,
            caclOutErrOAMCells,
            caclOutVpiVciErrCells
            }
       STATUS deprecated  -- replaced by caclATMStatsMIBGroup
       DESCRIPTION
          "A collection of objects which provide statistics for ATM end-system
           interfaces."
       ::= { caclMIBGroups 3}
             
caclHighSpeedATMMIBGroup OBJECT-GROUP
        OBJECTS {
            caclHInRcvCLP0Cells,
            caclHInRcvCLP1Cells,
            caclHOutXmtCLP0Cells,
            caclHOutXmtCLP1Cells
            }              
       STATUS deprecated -- replaced by caclHighSpeedATMMIBGroup1
       DESCRIPTION
          "These statistics apply to ATM interfaces with speed of 
           OC12 or higher."
       ::= { caclMIBGroups 4}

caclIntervalStatsMIBGroup OBJECT-GROUP
        OBJECTS {
               caclTimeElapsed,
               caclValidIntervals,
               caclInvalidIntervals,
               caclIntervalInRcvCLP0Cells,
               caclIntervalInRcvCLP1Cells,
               caclIntervalInValidOAMCells,
               caclIntervalInErrOAMCells,
               caclIntervalInGfcCells,
               caclIntervalInVpiVciErrCells,
               caclIntervalInLastUnknVpi,
               caclIntervalInLastUnknVci,
               caclIntervalInXmtCLP0Cells,
               caclIntervalInXmtCLP1Cells,
               caclIntervalInValidRMCells,
               caclIntervalInRcvIdleCells,
               caclIntervalInHecErrDiscCells,
               caclIntervalInHecErrCorrCells,
               caclIntervalInUpcCLP0DiscCells,
               caclIntervalInUpcTotalDiscCells,
               caclIntervalInUpcTotNonCmpCells,
               caclIntervalOutXmtCLP0Cells,
               caclIntervalOutXmtCLP1Cells,
               caclIntervalOutValidOAMCells,
               caclIntervalOutErrOAMCells,
               caclIntervalOutVpiVciErrCells,
               caclIntervalOutRcvCLP0Cells,
               caclIntervalOutRcvCLP1Cells,     
               caclIntervalOutRcvValidRMCells,
               caclIntervalOutRcvIdleCells
     
        }
        STATUS deprecated  -- replaced by caclIntervalStatsMIBGroup1
        DESCRIPTION
           "A collection of interval statistics."
       ::= { caclMIBGroups 5 }


caclATMSwitchStatsMIBGroup1 OBJECT-GROUP
        OBJECTS {
            caclInXmtCLP0Cells,         
            caclInXmtCLP1Cells,
            caclOutRcvCLP0Cells,                
            caclOutRcvCLP1Cells,                
            caclOutRcvValidRMCells,
            caclOutRcvIdleCells,
            caclHighInXmtCLP0Cells,         
            caclHighInXmtCLP1Cells,         
            caclHighOutRcvCLP0Cells,
            caclHighOutRcvCLP1Cells   
         }
       STATUS current
       DESCRIPTION
          "A collection of objects which provide statistics 
           for ATM switch interfaces."
       ::= { caclMIBGroups 6}

caclATMStatsMIBGroup OBJECT-GROUP
        OBJECTS {
            caclInRcvCLP0Cells,
            caclInRcvCLP1Cells,
            caclInValidOAMCells,
            caclInErrOAMCells,
            caclInGfcCells,
            caclInVpiVciErrCells,
            caclInLastUnknVpi,
            caclInLastUnknVci,
            caclInValidRMCells,         
            caclInRcvIdleCells,         
            caclInHecErrDiscCells,
            caclInHecErrCorrectedCells,
            caclInUpcCLP0DiscCells,
            caclInUpcTotalDiscCells,
            caclInUpcTotalNonCompCells,
            caclOutXmtCLP0Cells,
            caclOutXmtCLP1Cells,
            caclOutValidOAMCells,
            caclOutErrOAMCells,
            caclOutVpiVciErrCells,
            caclHighInRcvCLP0Cells,
            caclHighInRcvCLP1Cells,
            caclHighInValidOAMCells,
            caclHighInVpiVciErrCells,
            caclHighInHecErrDiscCells,
            caclHighInHecErrCorrectedCells,
            caclHighOutXmtCLP0Cells,
            caclHighOutXmtCLP1Cells,
            caclHighOutValidOAMCells
            }
       STATUS current
       DESCRIPTION
          "A collection of objects which provide statistics 
           for ATM switch and ATM end-system interfaces."
       ::= { caclMIBGroups 7}

caclHighSpeedATMMIBGroup1 OBJECT-GROUP
        OBJECTS {
            caclHInRcvCLP0Cells,
            caclHInRcvCLP1Cells,
            caclHOutXmtCLP0Cells,
            caclHOutXmtCLP1Cells,
            caclHCInValidOAMCells,
            caclHCInVpiVciErrCells,
            caclHCInXmtCLP0Cells,         
            caclHCInXmtCLP1Cells,         
            caclHCInHecErrDiscCells,
            caclHCInHecErrCorrectedCells,
            caclHCOutValidOAMCells,
            caclHCOutRcvCLP0Cells,                
            caclHCOutRcvCLP1Cells
            }              
       STATUS current
       DESCRIPTION
          "These statistics apply to ATM interfaces with speed of 
           OC12 or higher."
       ::= { caclMIBGroups 8}

caclIntervalStatsMIBGroup1 OBJECT-GROUP
        OBJECTS {
               caclTimeElapsed,
               caclValidIntervals,
               caclInvalidIntervals,
               caclIntervalInRcvCLP0Cells,
               caclIntervalInRcvCLP1Cells,
               caclIntervalInValidOAMCells,
               caclIntervalInErrOAMCells,
               caclIntervalInGfcCells,
               caclIntervalInVpiVciErrCells,
               caclIntervalInLastUnknVpi,
               caclIntervalInLastUnknVci,
               caclIntervalInXmtCLP0Cells,
               caclIntervalInXmtCLP1Cells,
               caclIntervalInValidRMCells,
               caclIntervalInRcvIdleCells,
               caclIntervalInHecErrDiscCells,
               caclIntervalInHecErrCorrCells,
               caclIntervalInUpcCLP0DiscCells,
               caclIntervalInUpcTotalDiscCells,
               caclIntervalInUpcTotNonCmpCells,
               caclIntervalOutXmtCLP0Cells,
               caclIntervalOutXmtCLP1Cells,
               caclIntervalOutValidOAMCells,
               caclIntervalOutErrOAMCells,
               caclIntervalOutVpiVciErrCells,
               caclIntervalOutRcvCLP0Cells,
               caclIntervalOutRcvCLP1Cells,     
               caclIntervalOutRcvValidRMCells,
               caclIntervalOutRcvIdleCells,
               caclHighIntervalInRcvCLP0Cells,
               caclHighIntervalInRcvCLP1Cells,
               caclHighIntervalInVpiVciErrCells,
               caclHighIntervalInXmtCLP0Cells,
               caclHighIntervalInXmtCLP1Cells,
	       caclHighIntervalInHecErrDiscCells,
               caclHighIntervalInHecErrCorrCells,       
               caclHighIntervalOutXmtCLP0Cells,
               caclHighIntervalOutXmtCLP1Cells,
               caclHighIntervalOutVpiVciErrCells,
               caclHighIntervalOutRcvCLP0Cells,
               caclHighIntervalOutRcvCLP1Cells

        }
        STATUS current
        DESCRIPTION
           "A collection of interval statistics."
       ::= { caclMIBGroups  9}


caclHCIntervalStatsMIBGroup OBJECT-GROUP
        OBJECTS {
               caclHCIntervalInRcvCLP0Cells,
               caclHCIntervalInRcvCLP1Cells,
               caclHCIntervalInVpiVciErrCells,
               caclHCIntervalInXmtCLP0Cells,
               caclHCIntervalInXmtCLP1Cells,
	       caclHCIntervalInHecErrDiscCells,
               caclHCIntervalInHecErrCorrCells,       
               caclHCIntervalOutXmtCLP0Cells,
               caclHCIntervalOutXmtCLP1Cells,
               caclHCIntervalOutVpiVciErrCells,
               caclHCIntervalOutRcvCLP0Cells,
               caclHCIntervalOutRcvCLP1Cells
        }
        STATUS current
        DESCRIPTION
           "A collection of interval statistics."
       ::= { caclMIBGroups 10 }


END