caclNullCellHeader |
.1.3.6.1.4.1.9.9.133.1.1.1.1.1 |
The first four bytes of the ATM header to be used for
Null cells. Generally, idle cells are inserted into a cell
stream as a mechanism for rate adaptation between the ATM
data link layer and the physical layer. The header fields:
Generic flow control,Payload type and Cell Loss Priority can
be specified in the value of this object. It applies to both
transmitted as well as received cells.
|
caclNullCellPayload |
.1.3.6.1.4.1.9.9.133.1.1.1.1.2 |
Null cell Payload definition. The idle cell
information field can be specified in this object. It applies
to both transmitted as well as received cells.
The default value is 0x6A.
|
caclHecCosetEnable |
.1.3.6.1.4.1.9.9.133.1.1.1.1.3 |
If enabled, the algorithm of Coset Polynomial Addition is applied
to do header error check calculations.
It applies to transmitted as well as received cells.
|
caclPayloadScramblingEnable |
.1.3.6.1.4.1.9.9.133.1.1.1.1.4 |
An indication of whether Payload Scrambling is enabled.
|
caclTimeElapsed |
.1.3.6.1.4.1.9.9.133.1.1.1.1.5 |
The number of seconds that have elapsed since the
beginning of the near end current error-
measurement period. If, for some reason, such as
an adjustment in the system's time-of-day clock,
the current interval exceeds the maximum value,
the agent will return the maximum value.
|
caclValidIntervals |
.1.3.6.1.4.1.9.9.133.1.1.1.1.6 |
The number of previous near end intervals for
which data was collected. The value will be
96 unless the interface was brought online within
the last 24 hours, in which case the value will be
the number of complete 15 minute near end
intervals since the interface has been online. In
the case where the agent is a proxy, it is
possible that some intervals are unavailable. In
this case, this interval is the maximum interval
number for which data is available.
|
caclInvalidIntervals |
.1.3.6.1.4.1.9.9.133.1.1.1.1.7 |
The number of near end intervals in the range from 0 to
caclValidIntervals for which no data is
available. This object will typically be zero
except in cases where the data for some intervals
are not available (e.g., in proxy situations).
|
caclInRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.1 |
The number of cells received on the interface with
CLP0 bit set.
|
caclInRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.2 |
The number of cells received on the interface with
CLP1 bit set.
|
caclInValidOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.3 |
The number of valid Operation and Maintainance(OAM) cells
received on the interface.
|
caclInErrOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.4 |
The number of errored OAM cells received on the interface.
|
caclInGfcCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.5 |
The number of non-zero GFC cells received on the interface.
|
caclInVpiVciErrCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.6 |
The number of cells received from the interface
with unknown Vpi/Vci values.
|
caclInLastUnknVpi |
.1.3.6.1.4.1.9.9.133.1.2.1.1.7 |
The last unknown Vpi value. This object is valid only
if 'caclInVpiVciErrCells' is non-zero.
|
caclInLastUnknVci |
.1.3.6.1.4.1.9.9.133.1.2.1.1.8 |
The last unknown Vci value. This object is valid only
if 'caclInVpiVciErrCells' is non-zero.
|
caclInXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.9 |
The number of CLP0 cells received from the interface
and transmitted to the switch fabric.
|
caclInXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.10 |
The number of CLP1 cells received from the interface
and transmitted to the switch fabric.
|
caclInValidRMCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.11 |
The number of Valid RM cells received from the interface.
|
caclInRcvIdleCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.12 |
The number of idle cells received from the interface.
|
caclInHecErrDiscCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.13 |
Header Error Check (HEC) calculation is used to provide error
detection and correction from the ATM cell header. This object
is the number of received cells which were discarded because
they had HEC errors.
|
caclInHecErrCorrectedCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.14 |
The number of received cells which had HEC errors
that were corrected.
|
caclInUpcCLP0DiscCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.15 |
In order to allocate resources fairly among different users,
networks police traffic at resource access points. The traffic
enforcement or policing taken at a UNI is called Usage Parameter
Control (UPC). This is the counter associated with the number
of CLP0 cells discarded due to policing.
|
caclInUpcTotalDiscCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.16 |
The total number of cells(CLP0+1) discarded due to policing.
|
caclInUpcTotalNonCompCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.17 |
The number of non-compliant cells (cells that are not compliant
to a specific traffic profile) discarded due to policing.
|
caclOutXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.18 |
The number of CLP0 cells transmitted to interface.
|
caclOutXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.19 |
The number of CLP1 cells transmitted to interface.
|
caclOutValidOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.20 |
The number of Operartion and Maintainance(OAM) cells received
by the interface from the switch fabric.
|
caclOutErrOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.21 |
The number of errored OAM cells received by the interface
from the switch fabric.
|
caclOutVpiVciErrCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.22 |
The number of cells with unknown vpi vci value in
received by the interface from the switch fabric.
|
caclOutRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.23 |
The number of CLP0 cells received by the interface
from the switch fabric.
|
caclOutRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.24 |
The number of CLP1 cells received by the interface
from the switch fabric.
|
caclOutRcvValidRMCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.25 |
The number of Valid RM cells received by the interface
from the switch fabric.
|
caclOutRcvIdleCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.26 |
The number of idle cells received by the interface
from the switch fabric.
|
caclHInRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.27 |
The 64-bit version of caclInRcvCLP0Cells.
|
caclHInRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.28 |
The 64-bit version of caclnRcvCLP1Cells.
|
caclHOutXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.29 |
The 64-bit version of caclOutXmtCLP0Cells.
|
caclHOutXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.30 |
The 64-bit version of caclOutXmtCLP1Cells.
|
caclHighInRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.31 |
The upper 32 bit of the number of cells received on the
interface with CLP0 bit set.
|
caclHighInRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.32 |
The upper 32 bit of the number of cells received on the
interface with CLP1 bit set.
|
caclHighInValidOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.33 |
The upper 32 bit of the number of valid Operation and
Maintainance(OAM) cells received on the interface.
|
caclHighInVpiVciErrCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.34 |
The upper 32 bit of the number of cells received from the
interface with unknown Vpi/Vci values.
|
caclHighInXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.35 |
The upper 32 bit of the number of CLP0 cells received from
the interface and transmitted to the switch fabric.
|
caclHighInXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.36 |
The upper 32 bit of the number of CLP1 cells received from
the interface and transmitted to the switch fabric.
|
caclHighInHecErrDiscCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.37 |
Header Error Check (HEC) calculation is used to provide error
detection and correction from the ATM cell header. This
object is the upper 32 bit of the number of received cells
which were discarded because they had HEC errors.
|
caclHighInHecErrCorrectedCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.38 |
The upper 32 bit of the number of received cells which had
HEC errors that were corrected.
|
caclHighOutXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.39 |
The upper 32 bit of the number of CLP0 cells transmitted to
interface.
|
caclHighOutXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.40 |
The upper 32 bit of the number of CLP1 cells transmitted to
interface.
|
caclHighOutValidOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.41 |
The upper 32 bit of the number of Operartion and
Maintainance(OAM) cells received by the interface from the
switch fabric.
|
caclHighOutRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.42 |
The upper 32 bit of the number of CLP0 cells received by
the interface from the switch fabric.
|
caclHighOutRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.1.1.43 |
The upper 32 bit of the number of CLP1 cells received by
the interface from the switch fabric.
|
caclIntervalNumber |
.1.3.6.1.4.1.9.9.133.1.2.2.1.1 |
A number between 0 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the 15 minutes interval completed 23 hours and 45
minutes prior to interval 1. 0 means the current
interval being collected.
|
caclIntervalInRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.2 |
The number of cells received on the interface with
CLP0 bit set during 15 minute interval.
|
caclIntervalInRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.3 |
The number of cells received on the interface with
CLP1 bit set during 15 minute interval.
|
caclIntervalInValidOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.4 |
The number of valid Operation and Maintainance(OAM) cells
received on the interface during 15 minute interval.
|
caclIntervalInErrOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.5 |
The number of errored OAM cells received on the interface
during 15 minute interval.
|
caclIntervalInGfcCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.6 |
The number of non-zero GFC cells received on the interface
during 15 minute interval.
|
caclIntervalInVpiVciErrCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.7 |
The number of cells received from the interface
with unknown Vpi/Vci values during 15 minute interval.
|
caclIntervalInLastUnknVpi |
.1.3.6.1.4.1.9.9.133.1.2.2.1.8 |
The last unknown Vpi value during 15 minute interval.
This object is valid only if the value of
'caclIntervalInVpiVciErrCells' for the same interval
is non-zero.
|
caclIntervalInLastUnknVci |
.1.3.6.1.4.1.9.9.133.1.2.2.1.9 |
The last unknown Vci value during 15 minute interval.
This object is valid only if the value of
'caclIntervalInVpiVciErrCells' for the same interval
is non-zero.
|
caclIntervalInXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.10 |
The number of CLP0 cells received from the interface
and transmitted to the switch fabric during 15 minute
interval.
|
caclIntervalInXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.11 |
The number of CLP1 cells received from the interface
and transmitted to the switch fabric during 15 minute
interval.
|
caclIntervalInValidRMCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.12 |
The number of Valid RM cells received from the interface
during 15 minute interval.
|
caclIntervalInRcvIdleCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.13 |
The number of idle cells received from the interface
during 15 minute interval.
|
caclIntervalInHecErrDiscCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.14 |
This object is the number of received cells which were
discarded because they had HEC errors during 15 minute
interval.
|
caclIntervalInHecErrCorrCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.15 |
The number of received cells which had HEC errors
that were corrected during 15 minute interval.
|
caclIntervalInUpcCLP0DiscCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.16 |
This is the counter associated with the number of CLP0
cells discarded due to policing during 15 minute interval.
|
caclIntervalInUpcTotalDiscCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.17 |
The total number of cells(CLP0+1) discarded due to policing
during 15 minute interval.
|
caclIntervalInUpcTotNonCmpCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.18 |
The number of non-compliant cells (cells that are not
compliant to a specific traffic profile) discarded due to
policing during 15 minute interval.
|
caclIntervalOutXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.19 |
The number of CLP0 cells transmitted to interface during
15 minute interval.
|
caclIntervalOutXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.20 |
The number of CLP1 cells transmitted to interface during
15 minute interval.
|
caclIntervalOutValidOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.21 |
The number of Operartion and Maintainance(OAM) cells received
by the interface from the switch fabric during 15 minute
interval.
|
caclIntervalOutErrOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.22 |
The number of errored OAM cells received by the interface
from the switch fabric during 15 minute interval.
|
caclIntervalOutVpiVciErrCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.23 |
The number of cells with unknown vpi vci value in
received by the interface from the switch fabric
during 15 minute interval.
|
caclIntervalOutRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.24 |
The number of CLP0 cells received by the interface
from the switch fabric during 15 minute interval.
|
caclIntervalOutRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.25 |
The number of CLP1 cells received by the interface
from the switch fabric during 15 minute interval.
|
caclIntervalOutRcvValidRMCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.26 |
The number of Valid RM cells received by the interface
from the switch fabric during 15 minute interval.
|
caclIntervalOutRcvIdleCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.27 |
The number of idle cells received by the interface
from the switch fabric during 15 minute interval.
|
caclHighIntervalInRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.28 |
The Upper 32 bit of the number of cells received on the
interface with CLP0 bit set during 15 minute interval.
|
caclHighIntervalInRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.29 |
The Upper 32 bit of the number of cells received on the
interface with CLP1 bit set during 15 minute interval.
|
caclHighIntervalInVpiVciErrCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.30 |
The Upper 32 bit of the number of cells received from the
interface with unknown Vpi/Vci values during 15 minute
interval.
|
caclHighIntervalInXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.31 |
The Upper 32 bit of the number of CLP0 cells received
from the interface and transmitted to the switch fabric
during 15 minute interval.
|
caclHighIntervalInXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.32 |
The Upper 32 bit of the number of CLP1 cells received
from the interface and transmitted to the switch fabric
during 15 minute interval.
|
caclHighIntervalInHecErrDiscCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.33 |
This object is the Upper 32 bit of the number of
received cells which were discarded because they had
HEC errors during 15 minute interval.
|
caclHighIntervalInHecErrCorrCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.34 |
The number of received cells which had HEC errors
that were corrected during 15 minute interval.
|
caclHighIntervalOutXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.35 |
The number of CLP0 cells transmitted to interface during 15
minute interval.
|
caclHighIntervalOutXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.36 |
The number of CLP1 cells transmitted to interface during 15
minute interval.
|
caclHighIntervalOutVpiVciErrCells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.37 |
The number of cells with unknown vpi vci value in
received by the interface from the switch fabric
during 15 minute interval.
|
caclHighIntervalOutRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.38 |
The number of CLP0 cells received by the interface
from the switch fabric during 15 minute interval.
|
caclHighIntervalOutRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.2.1.39 |
The number of CLP1 cells received by the interface
from the switch fabric during 15 minute interval.
|
caclHCInValidOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.3.1.1 |
The 64 bit version of the number of valid Operation
and Maintainance(OAM) cells received on the interface.
|
caclHCInVpiVciErrCells |
.1.3.6.1.4.1.9.9.133.1.2.3.1.2 |
The 64 bit version of the number of cells received from the
interface with unknown Vpi/Vci values.
|
caclHCInXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.3.1.3 |
The 64 bit version of the number of CLP0 cells received
from the interface and transmitted to the switch fabric.
|
caclHCInXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.3.1.4 |
The 64 bit version of the number of CLP1 cells received
from the interface and transmitted to the switch
fabric.
|
caclHCInHecErrDiscCells |
.1.3.6.1.4.1.9.9.133.1.2.3.1.5 |
Header Error Check (HEC) calculation is used to provide
error detection and correction from the ATM cell header.
This object is 64 bit version of the the number of
received cells which were discarded because they had
HEC errors.
|
caclHCInHecErrCorrectedCells |
.1.3.6.1.4.1.9.9.133.1.2.3.1.6 |
The 64 bit version of thenumber of received cells which had
HEC errors that were corrected.
|
caclHCOutValidOAMCells |
.1.3.6.1.4.1.9.9.133.1.2.3.1.7 |
The 64 bit version of the number of Operartion and
Maintainance(OAM) cells received by the interface from the
switch fabric.
|
caclHCOutRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.3.1.8 |
The 64 bit version of the number of CLP0 cells received by
the interface from the switch fabric.
|
caclHCOutRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.3.1.9 |
The 64 bit version of the number of CLP1 cells received by
the interface from the switch fabric.
|
caclHCIntervalInRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.1 |
The 64 bit version of the number of cells received on the
interface with CLP0 bit set during 15 minute interval.
|
caclHCIntervalInRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.2 |
The 64 bit version of the number of cells received on the
interface with CLP1 bit set during 15 minute interval.
|
caclHCIntervalInVpiVciErrCells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.3 |
The 64 bit version of the number of cells received from the
interface with unknown Vpi/Vci values during 15 minute
interval.
|
caclHCIntervalInXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.4 |
The 64 bit version of the number of CLP0 cells received
from the interface and transmitted to the switch fabric
during 15 minute interval.
|
caclHCIntervalInXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.5 |
The 64 bit version of the number of CLP1 cells received
from the interface and transmitted to the switch fabric
during 15 minute interval.
|
caclHCIntervalInHecErrDiscCells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.6 |
This object is the 64 bit version of the number of
received cells which were discarded because they had HEC
errors during 15 minute interval.
|
caclHCIntervalInHecErrCorrCells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.7 |
The 64 bit version of the number of received cells which
had HEC errors that were corrected during 15 minute
interval.
|
caclHCIntervalOutXmtCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.8 |
The 64 bit version of the number of CLP0 cells transmitted
to interface during 15 minute interval.
|
caclHCIntervalOutXmtCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.9 |
The 64 bit version of the number of CLP1 cells transmitted
to interface during 15 minute interval.
|
caclHCIntervalOutVpiVciErrCells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.10 |
The 64 bit version of the number of cells with unknown vpi
vci value in received by the interface from the switch
fabric during 15 minute interval.
|
caclHCIntervalOutRcvCLP0Cells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.11 |
The 64 bit version of the number of CLP0 cells received by
the interfacefrom the switch fabric during 15 minute
interval.
|
caclHCIntervalOutRcvCLP1Cells |
.1.3.6.1.4.1.9.9.133.1.2.4.1.12 |
The 64 bit version of the number of CLP1 cells received by
the interface from the switch fabric during 15 minute
interval.
|