CISCO-ATM-SWITCH-ADDR-MIB.mib object view, vendor Cisco
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CISCO-ATM-SWITCH-ADDR-MIB and use it to monitor vendor specific OID's.
CISCO-ATM-SWITCH-ADDR-MIB file content
Object view of CISCO-ATM-SWITCH-ADDR-MIB:
| Scalar Object |
| ciscoAtmSwAddrEntry |
.1.3.6.1.4.1.9.9.51.1.1.1 |
|
An entry in the ciscoAtmSwAddrTable.
|
| Tabular Object |
| ciscoAtmSwAddrIndex |
.1.3.6.1.4.1.9.9.51.1.1.1.1 |
|
A sequence number when address gets created.
1 is the primary address. This is dense table and
this index will be re-sequenced when a entry get
deleted and it can only create new entry when append
in the end of table.
|
| ciscoAtmSwAddrAddress |
.1.3.6.1.4.1.9.9.51.1.1.1.2 |
|
A valid address for a given switch.
|
| ciscoAtmSwAddrRowStatus |
.1.3.6.1.4.1.9.9.51.1.1.1.3 |
|
This object is used to create and delete rows in the
ciscoAtmSwAddrTable.
|
| Table |
| ciscoAtmSwAddrTable |
.1.3.6.1.4.1.9.9.51.1.1 |
|
This table contains an address list on a per switch
basis.
|
| Object Identifier |
| ciscoAtmSwAddrMIB |
.1.3.6.1.4.1.9.9.51 |
|
ATM Switch address MIB
|
| ciscoAtmSwAddrMIBObjects |
.1.3.6.1.4.1.9.9.51.1 |
| ciscoAtmSwAddrMIBConformance |
.1.3.6.1.4.1.9.9.51.3 |
| ciscoAtmSwAddrMIBCompliances |
.1.3.6.1.4.1.9.9.51.3.1 |
| ciscoAtmSwAddrMIBGroups |
.1.3.6.1.4.1.9.9.51.3.2 |
| Group |
| ciscoAtmSwAddrMIBGroup |
.1.3.6.1.4.1.9.9.51.3.2.1 |
