CISCO-ATM-TRAFFIC-MIB.mib object view, vendor Cisco

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file CISCO-ATM-TRAFFIC-MIB and use it to monitor vendor specific OID's.

CISCO-ATM-TRAFFIC-MIB file content

Object view of CISCO-ATM-TRAFFIC-MIB:

Scalar Object
atmTrafficDescrParamExtEntry	.1.3.6.1.4.1.9.10.11.1.2.1.1
An entry in the Traffic Parameter Descriptor extension table.
Tabular Object
atmTrafficExplicitServCategory	.1.3.6.1.4.1.9.10.11.1.2.1.1.1
This objects indicates the Service Category specified by the Traffic Descriptor. If it is defined, the setting of this object determines the Service Category used for the connection. This then limits the possible Traffic Descriptor Types as follows: Explicit Service Category Type may only be ----------------------------------------- cbr atmNoClpNoScr. atmClpNoTaggingNoScr atmClpTaggingNoScr atmNoClpNoScrCdvt abr/ubr atmNoTrafficDescriptor atmNoClpNoScr. atmNoClpNoScrCdvt atmNoClpMcr -- ubr+/abr atmNoClpMcrCdvt -- ubr+/abr vbr atmNoClpScr atmClpNoTaggingScr atmClpTaggingScr atmClpScrMbsCdvt atmNoClpScrMbsCdvt ----------------------------------------- If the settings of Service Category and Traffic Descriptor Type are not compatible, the row can not be made active.
atmTrafficDerivedServCategory	.1.3.6.1.4.1.9.10.11.1.2.1.1.2
This object indicates the Service Category derived from the Traffic Descriptor. If the object atmTrafficExplicitServCategory has a defined value, then this object mirrors that value. If Explicit Service Category has the value notDef, then this object reflects the Service Category derived from the Traffic Descriptor Type as follows: Traffic Descriptor Service Type Category ----------------------------------------- atmNoTrafficDescriptor ubr atmNoClpMcr abr atmNoClpMcrCdvt abr atmNoClpNoScr --| atmClpNoTaggingNoScr |-- cbr atmClpTaggingNoScr | atmNoClpNoScrCdvt --| atmNoClpScr --| atmClpNoTaggingScr |-- vbr-rt atmClpScrMbsCdvt | atmNoClpScrMbsCdvt | atmClpTaggingScr --| -----------------------------------------
atmTrafficDescriptorName	.1.3.6.1.4.1.9.10.11.1.2.1.1.3
A human readable string that contains the unique name of this Traffic Descriptor. This object will return a zero-length string if value is not set.
Table
atmTrafficDescrParamExtTable	.1.3.6.1.4.1.9.10.11.1.2.1
Provide additional information specifying traffic parameters for a VC/VP.
Object Identifier
ciscoAtmTrafficExtMIB	.1.3.6.1.4.1.9.10.11
This MIB module is an extension to traffic OIDs and variables defined in rfc1695.
ciscoAtmTrafficExtMIBObjects	.1.3.6.1.4.1.9.10.11.1
ciscoAtmTrafficTypeExt	.1.3.6.1.4.1.9.10.11.1.1
ciscoAtmTrafficTableExt	.1.3.6.1.4.1.9.10.11.1.2
atmNoClpNoScrCdvt	.1.3.6.1.4.1.9.10.11.1.1.1
Specifies peak cell rate for CLP, and cell delay variation tolerance: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CDVT in cell-times Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor is for cbr, abr or ubr service categories, desiring to specify the cdvt as well as pcr.
atmClpScrMbsCdvt	.1.3.6.1.4.1.9.10.11.1.1.2
This traffic descriptor is for Peak Cell Rate (PCR), Sustained Cell Rate (SCR), Maximum Burst Size applied to SCR, and Cell Delay Variation Tolerance applied to PCR. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0 sustained cell rate in cells per second. Parameter 3: maximum burst size in cells Parameter 4: CDVT in cell-times Parameter 5: not used.
atmNoClpScrMbsCdvt	.1.3.6.1.4.1.9.10.11.1.1.3
This traffic descriptor is for Peak Cell Rate (PCR), Sustained Cell Rate (SCR), Maximum Burst Size applied to SCR, and Cell Delay Variation Tolerance applied to PCR. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0+1 sustained cell rate in cells per second. Parameter 3: maximum burst size in cells Parameter 4: CDVT in cell-times Parameter 5: not used.
atmNoClpMcr	.1.3.6.1.4.1.9.10.11.1.1.4
This traffic descriptor is for Peak Cell Rate (PCR) and Minimum Cell Rate (MCR). The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0+1 minimum cell rate in cells per second. Parameter 3: not used. Parameter 4: not used. Parameter 5: not used.
atmNoClpMcrCdvt	.1.3.6.1.4.1.9.10.11.1.1.5
This traffic descriptor is for Peak Cell Rate (PCR), Minimum Cell Rate (MCR), and Cell Delay Variation Tolerance applied to PCR. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CDVT in cell-times Parameter 3: CLP=0+1 minimum cell rate in cells per second. Parameter 4: not used. Parameter 5: not used.
ciscoAtmTrafficExtMIBConformance	.1.3.6.1.4.1.9.10.11.3
ciscoAtmTrafficExtMIBCompliances	.1.3.6.1.4.1.9.10.11.3.1
ciscoAtmTrafficExtMIBGroups	.1.3.6.1.4.1.9.10.11.3.2
Group
ciscoAtmTrafficTableExtMIBGroup	.1.3.6.1.4.1.9.10.11.3.2.1
A collection of objects which provide extensions to the ATM Traffic Parameter Descriptor Table.
ciscoAtmTrafficNmsGroup	.1.3.6.1.4.1.9.10.11.3.2.2
A collection of objects which provide additional information for a management system.