CISCO-CALL-TRACKER-MODEM-MIB device MIB details by Cisco
CISCO-CALL-TRACKER-MODEM-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-CALL-TRACKER-MODEM-MIB.
| Vendor: | Cisco |
|---|---|
| Mib: | CISCO-CALL-TRACKER-MODEM-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- CISCO-CALL-TRACKER-MODEM-MIB.my: Modem Call Progress and Status -- Tracking MIB -- -- -- Copyright (c) 1996-2000 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-CALL-TRACKER-MODEM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC Unsigned32 FROM CISCO-TC ciscoMgmt FROM CISCO-SMI cctActiveCallId, cctHistoryIndex FROM CISCO-CALL-TRACKER-MIB; ciscoCallTrackerModemMIB MODULE-IDENTITY LAST-UPDATED "200006070000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-dial@cisco.com" DESCRIPTION "This MIB module provides modem call related data for tracking the progress and status of a call. This module extends tables defined in the MIB module ciscoCallTrackerMIB in CISCO-CALL-TRACKER-MIB. " ::= { ciscoMgmt 165 } -- -- Textual Conventions -- -- -- Modulation textual convention -- CctmModulation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents possible modulation standards other - Modulation other than those identified bell103a - bell212a - v21 - v22 - v22bis - v32 - v32bis - vfc - v34 - v17 - v29 - v33 - k56flex - v23 - v32terbo - v34plus - v90 - v27ter - v110 - " SYNTAX INTEGER { other (1), bell103a (2), bell212a (3), v21 (4), v22 (5), v22bis (6), v32 (7), v32bis (8), vfc (9), v34 (10), v17 (11), v29 (12), v33 (13), k56flex (14), v23 (15), v32terbo (16), v34plus (17), v90 (18), v27ter (19), v110 (20) } -- -- Error Correction protocol textual convention -- CctmECProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents possible error correction protocols normal - No EC present direct - mnp - lapmV42 - syncMode - asyncMode - No EC present, same as normal(1) ara1 - ARA 1.0 ara2 - ARA 2.0 other - EC protocol other than those identified " SYNTAX INTEGER { normal (1), direct (2), mnp (3), lapmV42 (4), syncMode (5), asyncMode (6), ara1 (7), ara2 (8), other (9) } -- -- Data Compression textual convention -- CctmDataCompression ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents possible data compression protocols none - No Data Compression present v42bisTx - V.42bis in transmit direction only v42bisRx - V.42bis in receive direction only v42bisBoth - V.42bis in receive and transmit directions mnp5 - " SYNTAX INTEGER { none (1), v42bisTx (2), v42bisRx (3), v42bisBoth (4), mnp5 (5) } -- Call Tracker Modem MIB objects definitions cctmMIBObjects OBJECT IDENTIFIER ::= { ciscoCallTrackerModemMIB 1 } -- The Call Tracker Modem MIB consists of the following groups -- [1] Call Tracker Active Group (cctmActive) -- [2] Call Tracker History Group (cctmHistory) cctmActive OBJECT IDENTIFIER ::= { cctmMIBObjects 1 } cctmHistory OBJECT IDENTIFIER ::= { cctmMIBObjects 2 } -- ***************************************************************** -- Call Tracker Active Group -- ***************************************************************** -- -- -- -- Call Active Table -- cctmActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF CctmActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for active calls in the system which utilize modem resources. It contains general modem session attributes and statistics at the modem link and modem protocol layers. The table extends the cctActiveTable, using the same index, cctActiveCallId. There are no entries for calls not requiring modem services. " ::= { cctmActive 1 } cctmActiveEntry OBJECT-TYPE SYNTAX CctmActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single call. Entries are created and deleted in sync with the entries in cctActiveTable, if the call utilizes modem service. " INDEX { cctActiveCallId } ::= { cctmActiveTable 1 } CctmActiveEntry ::= SEQUENCE { cctmActiveProjectedMaxRxRate Unsigned32, cctmActiveProjectedMaxTxRate Unsigned32, cctmActiveRxRate Unsigned32, cctmActiveTxRate Unsigned32, cctmActiveAttemptedModulation CctmModulation, cctmActiveInitialModulation CctmModulation, cctmActiveModulation CctmModulation, cctmActiveAttemptedECProtocol CctmECProtocol, cctmActiveECProtocol CctmECProtocol, -- If BITS doesn't compile replace with OCTET STRING -- cctmActiveSupportedDC BITS, cctmActiveSupportedDC OCTET STRING, cctmActiveDataCompression CctmDataCompression, cctmActiveRxHighWatermark Gauge32, cctmActiveRxLowWatermark Gauge32, cctmActiveTxHighWatermark Gauge32, cctmActiveTxLowWatermark Gauge32, cctmActiveLocalUpRateShifts Counter32, cctmActiveRemoteUpRateShifts Counter32, cctmActiveLocalDownRateShifts Counter32, cctmActiveRemoteDownRateShifts Counter32, cctmActiveRateShiftFailures Counter32, cctmActiveLocalRetrains Counter32, cctmActiveRemoteRetrains Counter32, cctmActiveRetrainFailures Counter32, cctmActiveRxLinkOctets Counter32, cctmActiveTxLinkOctets Counter32, cctmActiveRxECFrames Counter32, cctmActiveTxECFrames Counter32, cctmActiveRxECNAKs Counter32, cctmActiveTxECNAKs Counter32, cctmActiveRxECFramesBad Counter32, cctmActiveECFramesResent Counter32, cctmActiveECLinkTimeouts Counter32, cctmActiveRxCharLost Counter32 } cctmActiveProjectedMaxRxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum received rate local modem informs remote modem it will support based on initial negotiations. The remote modem will not attempt to transmit at rates greater than what the local modem will accept. The initial negotiated receive rate is in cctActiveRxRate. " ::= { cctmActiveEntry 1 } cctmActiveProjectedMaxTxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum rate the remote modem indicates it can accept based on initial negotiations. The local modem will not attempt to transmit at rates above what the remote modem will accept. The initial negotiated transmit rate is in cctActiveTxRate. " ::= { cctmActiveEntry 2 } cctmActiveRxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Current receive data rate for this call. The value of this object will be the same as reported in cmRXRate from CISCO-MODEM-MGMT-MIB while the call is active. " ::= { cctmActiveEntry 3 } cctmActiveTxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Current transmit data rate for this call. The value of this object will be the same as reported in cmTXRate from CISCO-MODEM-MGMT-MIB while the call is active. " ::= { cctmActiveEntry 4 } cctmActiveAttemptedModulation OBJECT-TYPE SYNTAX CctmModulation MAX-ACCESS read-only STATUS current DESCRIPTION "The initial modulation attempted when the modems began negotiation. " ::= { cctmActiveEntry 5 } cctmActiveInitialModulation OBJECT-TYPE SYNTAX CctmModulation MAX-ACCESS read-only STATUS current DESCRIPTION "The initial negotiated modulation. " ::= { cctmActiveEntry 6 } cctmActiveModulation OBJECT-TYPE SYNTAX CctmModulation MAX-ACCESS read-only STATUS current DESCRIPTION "The current modulation for this call. It is possible for retrains to result in the modulation being renogiated during a call. The value of this object will be the same as reported in cmModulationSchemeUsed from CISCO-MODEM-MGMT-MIB while the call is active. " ::= { cctmActiveEntry 7 } cctmActiveAttemptedECProtocol OBJECT-TYPE SYNTAX CctmECProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The initial modem error correction protocol attempted during call negotiation. The actual EC negotiated is in cctmActiveECProtocol. " ::= { cctmActiveEntry 8 } cctmActiveECProtocol OBJECT-TYPE SYNTAX CctmECProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The modem error correction protocol negotiated for this call. The value of this object will be the same as reported in cmProtocolUsed from CISCO-MODEM-MGMT-MIB while the call is active. " ::= { cctmActiveEntry 9 } -- If BITS doesn't compile replace with OCTET STRING cctmActiveSupportedDC OBJECT-TYPE -- SYNTAX BITS { -- mnp5(0), -- v42bisRx(1), -- v42bisTx(2) -- } SYNTAX OCTET STRING(SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "The data compression protocols supported by the calling modem. This object is a bit map, with each bit representing a different call type as identified below. A 1-bit indicates the DC protocol is supported. A 0-bit indicates the DC protocol is not supported. Bit 0 - MNP5 Bit 1 - V.42bis in the receive direction Bit 2 - V.42bis in the transmit direction V.42bis may be separately available in Rx or Tx directions. If all bits are zero, no data compression is supported. The particular compression selected by the answering modem is reported in cctmActiveDataCompression. " ::= { cctmActiveEntry 10 } cctmActiveDataCompression OBJECT-TYPE SYNTAX CctmDataCompression MAX-ACCESS read-only STATUS current DESCRIPTION "The modem compression protocol selected for this call. " ::= { cctmActiveEntry 11 } cctmActiveRxHighWatermark OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum receive data rate achieved during this call. " ::= { cctmActiveEntry 12 } cctmActiveRxLowWatermark OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum receive data rate during this call. " ::= { cctmActiveEntry 13 } cctmActiveTxHighWatermark OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum transmit data rate achieved during this call. " ::= { cctmActiveEntry 14 } cctmActiveTxLowWatermark OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum transmit data rate during this call. " ::= { cctmActiveEntry 15 } cctmActiveLocalUpRateShifts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of locally initiated rate shifts to increase the data rate which were successful. " ::= { cctmActiveEntry 16 } cctmActiveLocalDownRateShifts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of locally initiated rate shifts to decrease the data rate which were successful. " ::= { cctmActiveEntry 17 } cctmActiveRemoteUpRateShifts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of remotely initiated rate shifts to increase the data rate which were successful. " ::= { cctmActiveEntry 18 } cctmActiveRemoteDownRateShifts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of remotely initiated rate shifts to decrease the data rate which were successful. " ::= { cctmActiveEntry 19 } cctmActiveRateShiftFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of rate shift attempts which failed to complete. A failure to complete a rate renegotiation results in a retrain attempt. " ::= { cctmActiveEntry 20 } cctmActiveLocalRetrains OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of locally initiated retrains for the call. Includes successfully completed retrains and those which failed. " ::= { cctmActiveEntry 21 } cctmActiveRemoteRetrains OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of remotely initiated retrains for the call. Includes successfully completed retrains and those which failed. " ::= { cctmActiveEntry 22 } cctmActiveRetrainFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of retrains which failed to complete. A failure to retrain results in another retrain attempt. The call will terminate if too many consecutive retrain failures occur. The consecutive retrain failure threshold is system specific. " ::= { cctmActiveEntry 23 } cctmActiveRxLinkOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total modem link level octets received during this call. If using Error Correction and Data Compression, this is the compressed data within the EC protocol frames. " ::= { cctmActiveEntry 24 } cctmActiveTxLinkOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total modem link level octets transmitted during this call. If using Error Correction and Data Compression, this is the compressed data within the EC protocol frames. " ::= { cctmActiveEntry 25 } cctmActiveRxECFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error correction data frames received successfully. This does not include damaged frames or control frames. " ::= { cctmActiveEntry 26 } cctmActiveTxECFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error correction data frames transmitted successfully. This does not include data frame resends or control frames. " ::= { cctmActiveEntry 27 } cctmActiveRxECNAKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of EC protocol negative acknowledgements (NAK) received. " ::= { cctmActiveEntry 28 } cctmActiveTxECNAKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of EC protocol negative acknowledgements (NAK) sent. " ::= { cctmActiveEntry 29 } cctmActiveRxECFramesBad OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total error correction frames received during the call which were determined to be bad. " ::= { cctmActiveEntry 30 } cctmActiveECFramesResent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of total retransmitted error correction data frames during the call. " ::= { cctmActiveEntry 31 } cctmActiveECLinkTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter provides the number of EC link protocol timer expirations which have occurred during the call. This corresponds to the T401 timer for LAPM and MNP. These are distinct from normal 'keep alive' and 'window open' timeouts. " ::= { cctmActiveEntry 32 } cctmActiveRxCharLost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of characters received by the modem but were dropped due to host buffer over run. " ::= { cctmActiveEntry 33 } -- ***************************************************************** -- Call Tracker History Group -- ***************************************************************** -- -- Call Tracker History Table -- cctmHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CctmHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides information on terminated modem calls. It contains general modem session attributes and statistics at the modem link and modem protocol layers. The table extends the cctHistoryTable, using the same index, cctHistoryIndex. There are no entries for calls not requiring modem services. " ::= { cctmHistory 1 } cctmHistoryEntry OBJECT-TYPE SYNTAX CctmHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single terminated modem call. Entries are created and deleted in sync with the entries in cctHistoryTable, if the call utilized modem service. " INDEX { cctHistoryIndex } ::= { cctmHistoryTable 1 } CctmHistoryEntry ::= SEQUENCE { cctmHistoryProjectedMaxRxRate Unsigned32, cctmHistoryProjectedMaxTxRate Unsigned32, cctmHistoryFinalRxRate Unsigned32, cctmHistoryFinalTxRate Unsigned32, cctmHistoryAttemptedModulation CctmModulation, cctmHistoryInitialModulation CctmModulation, cctmHistoryFinalModulation CctmModulation, cctmHistoryAttemptedECProtocol CctmECProtocol, cctmHistoryECProtocol CctmECProtocol, -- If BITS doesn't compile replace with OCTET STRING -- cctmHistorySupportedDC BITS, cctmHistorySupportedDC OCTET STRING, cctmHistoryDataCompression CctmDataCompression, cctmHistoryRxHighWatermark Gauge32, cctmHistoryRxLowWatermark Gauge32, cctmHistoryTxHighWatermark Gauge32, cctmHistoryTxLowWatermark Gauge32, cctmHistoryLocalUpRateShifts Counter32, cctmHistoryRemoteUpRateShifts Counter32, cctmHistoryLocalDownRateShifts Counter32, cctmHistoryRemoteDownRateShifts Counter32, cctmHistoryRateShiftFailures Counter32, cctmHistoryLocalRetrains Counter32, cctmHistoryRemoteRetrains Counter32, cctmHistoryRetrainFailures Counter32, cctmHistoryRxLinkOctets Counter32, cctmHistoryTxLinkOctets Counter32, cctmHistoryRxECFrames Counter32, cctmHistoryTxECFrames Counter32, cctmHistoryRxECNAKs Counter32, cctmHistoryTxECNAKs Counter32, cctmHistoryRxECFramesBad Counter32, cctmHistoryECFramesResent Counter32, cctmHistoryECLinkTimeouts Counter32, cctmHistoryRxCharLost Counter32, cctmHistoryDisconnectReason Unsigned32, cctmHistoryDisconnectReasonText DisplayString } cctmHistoryProjectedMaxRxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum received rate local modem informs remote modem it will support based on initial negotiations. The remote modem will not attempt to transmit at rates greater than what the local modem will accept. The initial negotiated receive rate is in cctHistoryRxRate. " ::= { cctmHistoryEntry 1 } cctmHistoryProjectedMaxTxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum rate the remote modem indicates it can accept based on initial negotiations. The local modem will not attempt to transmit at rates above what the remote modem will accept. The initial negotiated transmit rate is in cctHistoryTxRate. " ::= { cctmHistoryEntry 2 } cctmHistoryFinalRxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Final receive data rate for this call. The initial negotiated receive rate is in cctHistoryRxRate. " ::= { cctmHistoryEntry 3 } cctmHistoryFinalTxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "Final transmit data rate for this call. The initial negotiated transmit rate is in cctHistoryTxRate. " ::= { cctmHistoryEntry 4 } cctmHistoryAttemptedModulation OBJECT-TYPE SYNTAX CctmModulation MAX-ACCESS read-only STATUS current DESCRIPTION "The initial modulation attempted when the modems began negotiation. " ::= { cctmHistoryEntry 5 } cctmHistoryInitialModulation OBJECT-TYPE SYNTAX CctmModulation MAX-ACCESS read-only STATUS current DESCRIPTION "The initial negotiated modulation. " ::= { cctmHistoryEntry 6 } cctmHistoryFinalModulation OBJECT-TYPE SYNTAX CctmModulation MAX-ACCESS read-only STATUS current DESCRIPTION "The final modulation for this call. It is possible for retrains to result in the modulation being renogiated during a call. " ::= { cctmHistoryEntry 7 } cctmHistoryAttemptedECProtocol OBJECT-TYPE SYNTAX CctmECProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The initial modem error correction protocol attempted during call negotiation. The actual EC negotiated is in cctmHistoryECProtocol. " ::= { cctmHistoryEntry 8 } cctmHistoryECProtocol OBJECT-TYPE SYNTAX CctmECProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The modem error correction protocol negotiated for this call. " ::= { cctmHistoryEntry 9 } -- If BITS doesn't compile replace with OCTET STRING cctmHistorySupportedDC OBJECT-TYPE -- SYNTAX BITS { -- mnp5(0), -- v42bisRx(1), -- v42bisTx(2) -- } SYNTAX OCTET STRING(SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "The data compression protocols supported by the calling modem. This object is a bit map, with each bit representing a different call type as identified below. A 1-bit indicates the DC protocol is supported. A 0-bit indicates the DC protocol is not supported. Bit 0 - MNP5 Bit 1 - V.42bis in the receive direction Bit 2 - V.42bis in the transmit direction V.42bis may be separately available in Rx or Tx directions. If all bits are zero, no data compression is supported. The particular compression selected by the answering modem is reported in cctmHistoryDataCompression. " ::= { cctmHistoryEntry 10 } cctmHistoryDataCompression OBJECT-TYPE SYNTAX CctmDataCompression MAX-ACCESS read-only STATUS current DESCRIPTION "The modem compression protocol selected for this call. " ::= { cctmHistoryEntry 11 } cctmHistoryRxHighWatermark OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum receive data rate achieved during this call. " ::= { cctmHistoryEntry 12 } cctmHistoryRxLowWatermark OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum receive data rate during this call. " ::= { cctmHistoryEntry 13 } cctmHistoryTxHighWatermark OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum transmit data rate achieved during this call. " ::= { cctmHistoryEntry 14 } cctmHistoryTxLowWatermark OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum transmit data rate during this call. " ::= { cctmHistoryEntry 15 } cctmHistoryLocalUpRateShifts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of locally initiated rate shifts to increase the data rate which were successful. " ::= { cctmHistoryEntry 16 } cctmHistoryLocalDownRateShifts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of locally initiated rate shifts to decrease the data rate which were successful. " ::= { cctmHistoryEntry 17 } cctmHistoryRemoteUpRateShifts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of remotely initiated rate shifts to increase the data rate which were successful. " ::= { cctmHistoryEntry 18 } cctmHistoryRemoteDownRateShifts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of remotely initiated rate shifts to decrease the data rate which were successful. " ::= { cctmHistoryEntry 19 } cctmHistoryRateShiftFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of rate shift attempts which failed to complete. A failure to complete a rate renegotiation results in a retrain attempt. " ::= { cctmHistoryEntry 20 } cctmHistoryLocalRetrains OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of locally initiated retrains for the call. Includes successfully completed retrains and those which failed. " ::= { cctmHistoryEntry 21 } cctmHistoryRemoteRetrains OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of remotely initiated retrains for the call. Includes successfully completed retrains and those which failed. " ::= { cctmHistoryEntry 22 } cctmHistoryRetrainFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of retrains which failed to complete. A failure to retrain results in another retrain attempt. The call will terminate if too many consecutive retrain failures occur. The consecutive retrain failure threshold is system specific. " ::= { cctmHistoryEntry 23 } cctmHistoryRxLinkOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total modem link level octets received during this call. If using Error Correction and Data Compression, this is the compressed data within the EC protocol frames. " ::= { cctmHistoryEntry 24 } cctmHistoryTxLinkOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total modem link level octets transmitted during this call. If using Error Correction and Data Compression, this is the compressed data within the EC protocol frames. " ::= { cctmHistoryEntry 25 } cctmHistoryRxECFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error correction data frames received successfully. This does not include damaged frames or control frames. " ::= { cctmHistoryEntry 26 } cctmHistoryTxECFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error correction data frames transmitted successfully. This does not include data frame resends or control frames. " ::= { cctmHistoryEntry 27 } cctmHistoryRxECNAKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of EC protocol negative acknowledgements (NAK) received. " ::= { cctmHistoryEntry 28 } cctmHistoryTxECNAKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of EC protocol negative acknowledgements (NAK) sent. " ::= { cctmHistoryEntry 29 } cctmHistoryRxECFramesBad OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total error correction frames received during the call which were determined to be bad. " ::= { cctmHistoryEntry 30 } cctmHistoryECFramesResent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of total retransmitted error correction data frames during the call. " ::= { cctmHistoryEntry 31 } cctmHistoryECLinkTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter provides the number of EC link protocol timer expirations which have occurred during the call. This corresponds to the T401 timer for LAPM and MNP. These are distinct from normal 'keep alive' and 'window open' timeouts. " ::= { cctmHistoryEntry 32 } cctmHistoryRxCharLost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of characters received by the modem but were dropped due to host buffer over run. " ::= { cctmHistoryEntry 33 } cctmHistoryDisconnectReason OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Code indicating the reason this call was terminated. " ::= { cctmHistoryEntry 34 } cctmHistoryDisconnectReasonText OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Text description of the disconnect reason indicated by cctHistoryDisconnectReason. Value is zero-length string if no text is available. " ::= { cctmHistoryEntry 35 } -- -- Call Tracker Extended Modem History Table -- cctmXHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CctmXHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides additional, detailed information on terminated modem calls. It contains low level modem session attributes and statistics at the modem link and modem protocol layers. The table extends the cctHistoryTable, using the same index, cctHistoryIndex. " ::= { cctmHistory 2 } cctmXHistoryEntry OBJECT-TYPE SYNTAX CctmXHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The detailed information for a single terminated modem call. Entries are created and deleted in sync with the entries in cctHistoryTable, if the call utilized modem service. " AUGMENTS { cctmHistoryEntry } ::= { cctmXHistoryTable 1 } CctmXHistoryEntry ::= SEQUENCE { cctmXHistoryRxECInfoFrameSize Unsigned32, cctmXHistoryTxECInfoFrameSize Unsigned32, cctmXHistoryRxECWindowSize Unsigned32, cctmXHistoryTxECWindowSize Unsigned32, cctmXHistoryRxLevel Integer32, cctmXHistoryTxLevel Integer32, cctmXHistoryConstellation INTEGER, cctmXHistoryV90Status INTEGER, cctmXHistoryV90Failure INTEGER, cctmXHistoryV90ClientId Unsigned32, cctmXHistoryECWindowClosures Counter32 } cctmXHistoryRxECInfoFrameSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "Negotiated maximum EC frame data payload size in the receive direction. LAPM distinguishes between Rx and Tx. MNP will have the the same information frame size for Rx and Tx, cctmHistoryTxECInfoFrameSize. " ::= { cctmXHistoryEntry 1 } cctmXHistoryTxECInfoFrameSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "Negotiated maximum EC frame data payload size in the transmit direction. LAPM distinguishes between Rx and Tx. MNP will have the the same information frame size for Tx and Rx, cctmHistoryRxECInfoFrameSize. " ::= { cctmXHistoryEntry 2 } cctmXHistoryRxECWindowSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The EC protocol window size in units of frames in the receive direction. This is the maximum number of information frames sent from remote modem that may be outstanding without receiving any acknowledgement from the local modem. If the EC protocol is LAPM, the Rx and Tx windows are separately negotiated and may have different values. If MNP, both windows are negotiated together and have the same value for this object and cctHistoryTxECWindowSize. " ::= { cctmXHistoryEntry 3 } cctmXHistoryTxECWindowSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The EC protocol window size in units of frames in the transmit direction. This is the maximum number of information frames sent from local modem that may be outstanding without receiving any acknowledgement from the remote modem. If the EC protocol is LAPM, the Rx and Tx windows are separately negotiated and may have different values. If MNP, both windows are negotiated together and have the same value for this object and cctHistoryRxECWindowSize. " ::= { cctmXHistoryEntry 4 } cctmXHistoryRxLevel OBJECT-TYPE SYNTAX Integer32 (-128..0) UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The final signal level in the receive direction for applicable modulations. " ::= { cctmXHistoryEntry 5 } cctmXHistoryTxLevel OBJECT-TYPE SYNTAX Integer32 (-128..0) UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The final signal level in the transmit direction for applicable modulations. " ::= { cctmXHistoryEntry 6 } cctmXHistoryConstellation OBJECT-TYPE SYNTAX INTEGER { points4(1), points16(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connection constellation size. " ::= { cctmXHistoryEntry 7 } cctmXHistoryV90Status OBJECT-TYPE SYNTAX INTEGER { notAttempted(1), failure(2), success(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if V.90 modulation was attempted during initial modem negotiation. notAttempted(1) - Client modem did not attempt V.90 failure(2) - Client and server modems attempted V.90, but were not successful success(3) - Client and server modems successfully negotiated V.90 during call setup. " ::= { cctmXHistoryEntry 8 } cctmXHistoryV90Failure OBJECT-TYPE SYNTAX INTEGER { noFailure(1), clientNonPCM(2), clientFallback(3), serverV90Disabled(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides an interpretation of why V.90 modulation was not achieved. noFailure(1) - V.90 was not attempted or it was successful. The value of cctmXHistoryV90Status will be notAttempted(1) or success(3) respectively. clientNonPCM(2) - Client selected a non-PCM connection due to PSTN properties. clientFallback(3) - Client was unable to sustain PCM due to PSTN properties and fellback to a non-PCM connection. serverV90Disabled(4) - Client attempted V.90 but server modem was configured to disable V.90. " ::= { cctmXHistoryEntry 9 } cctmXHistoryV90ClientId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Client modem identification inferred from the V.90 DIL training and sign patterns. " ::= { cctmXHistoryEntry 10 } cctmXHistoryECWindowClosures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the EC protocol window closed without receiving an ACK or NAK from the remote modem. A closure occurs when the maximum number of EC information frames have been sent without receiving any acknowledgement. The window size is provided in cctmHistoryRxECWindowSize. " ::= { cctmXHistoryEntry 11 } -- ***************************************************************** -- Notifications -- ***************************************************************** cctmMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoCallTrackerModemMIB 2 } cctmMIBNotifications OBJECT IDENTIFIER ::= { cctmMIBNotificationPrefix 0 } -- ***************************************************************** -- Conformance and Compliances -- ***************************************************************** cctmMIBConformance OBJECT IDENTIFIER ::= { ciscoCallTrackerModemMIB 3 } cctmMIBCompliances OBJECT IDENTIFIER ::= { cctmMIBConformance 1 } cctmMIBGroups OBJECT IDENTIFIER ::= { cctmMIBConformance 2 } -- compliance statements cctmMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the CISCO CALL TRACKER MODEM MIB" MODULE -- this module MANDATORY-GROUPS { cctmActiveGroup, cctmHistoryGroup } -- optional groups GROUP cctmXHistoryGroup DESCRIPTION "Optional extended call modem statistics." ::= { cctmMIBCompliances 1 } -- units of conformance cctmActiveGroup OBJECT-GROUP OBJECTS { cctmActiveProjectedMaxRxRate, cctmActiveProjectedMaxTxRate, cctmActiveRxRate, cctmActiveTxRate, cctmActiveAttemptedModulation, cctmActiveInitialModulation, cctmActiveModulation, cctmActiveAttemptedECProtocol, cctmActiveECProtocol, cctmActiveSupportedDC, cctmActiveDataCompression, cctmActiveRxHighWatermark, cctmActiveRxLowWatermark, cctmActiveTxHighWatermark, cctmActiveTxLowWatermark, cctmActiveLocalUpRateShifts, cctmActiveRemoteUpRateShifts, cctmActiveLocalDownRateShifts, cctmActiveRemoteDownRateShifts, cctmActiveRateShiftFailures, cctmActiveLocalRetrains, cctmActiveRemoteRetrains, cctmActiveRetrainFailures, cctmActiveRxLinkOctets, cctmActiveTxLinkOctets, cctmActiveRxECFrames, cctmActiveTxECFrames, cctmActiveRxECNAKs, cctmActiveTxECNAKs, cctmActiveRxECFramesBad, cctmActiveECFramesResent, cctmActiveECLinkTimeouts, cctmActiveRxCharLost } STATUS current DESCRIPTION "A collection of objects providing the active call modem information. " ::= { cctmMIBGroups 2 } cctmHistoryGroup OBJECT-GROUP OBJECTS { cctmHistoryProjectedMaxRxRate, cctmHistoryProjectedMaxTxRate, cctmHistoryFinalRxRate, cctmHistoryFinalTxRate, cctmHistoryAttemptedModulation, cctmHistoryInitialModulation, cctmHistoryFinalModulation, cctmHistoryAttemptedECProtocol, cctmHistoryECProtocol, cctmHistorySupportedDC, cctmHistoryDataCompression, cctmHistoryRxHighWatermark, cctmHistoryRxLowWatermark, cctmHistoryTxHighWatermark, cctmHistoryTxLowWatermark, cctmHistoryLocalUpRateShifts, cctmHistoryRemoteUpRateShifts, cctmHistoryLocalDownRateShifts, cctmHistoryRemoteDownRateShifts, cctmHistoryRateShiftFailures, cctmHistoryLocalRetrains, cctmHistoryRemoteRetrains, cctmHistoryRetrainFailures, cctmHistoryRxLinkOctets, cctmHistoryTxLinkOctets, cctmHistoryRxECFrames, cctmHistoryTxECFrames, cctmHistoryRxECNAKs, cctmHistoryTxECNAKs, cctmHistoryRxECFramesBad, cctmHistoryECFramesResent, cctmHistoryECLinkTimeouts, cctmHistoryRxCharLost, cctmHistoryDisconnectReason, cctmHistoryDisconnectReasonText } STATUS current DESCRIPTION "A collection of objects providing the historical call modem information. " ::= { cctmMIBGroups 3 } cctmXHistoryGroup OBJECT-GROUP OBJECTS { cctmXHistoryRxECInfoFrameSize, cctmXHistoryTxECInfoFrameSize, cctmXHistoryRxECWindowSize, cctmXHistoryTxECWindowSize, cctmXHistoryRxLevel, cctmXHistoryTxLevel, cctmXHistoryConstellation, cctmXHistoryV90Status, cctmXHistoryV90Failure, cctmXHistoryV90ClientId, cctmXHistoryECWindowClosures } STATUS current DESCRIPTION "A collection of objects providing the historical detailed call modem information. " ::= { cctmMIBGroups 4 } END