CISCO-CATOS-ACL-QOS-CAPABILITY device MIB details by Cisco

CISCO-CATOS-ACL-QOS-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-CATOS-ACL-QOS-CAPABILITY.

Vendor:	Cisco
Mib:	CISCO-CATOS-ACL-QOS-CAPABILITY  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-CATOS-ACL-QOS-CAPABILITY.my:
-- Cisco CISCO-CATOS-ACL-QOS-MIB AGENT-CAPABILITIES
--
-- August 2003, Edward Pham 
--
-- Copyright (c) 2003, 2004 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-CATOS-ACL-QOS-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoCatOSAclQosCapability MODULE-IDENTITY
        LAST-UPDATED    "200406240000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 West Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-lan-switch-snmp@cisco.com"
        DESCRIPTION
                "The agent capabilities description of 
                 CISCO-CATOS-ACL-QOS-MIB."

        REVISION        "200406240000Z"
        DESCRIPTION
                "Add caqCapabilityV08R0401Cat6KPfc, 
                 caqCapabilityV08R0401Cat6KPfc2,
                 caqCapabilityV08R0401Cat6KPfc3,
                 caqCapabilityV08R0401Cat6KPfc3b
                 agent capability statements."
        REVISION        "200401270000Z"
        DESCRIPTION
                "Add caqCapabilityV08R0301Cat6KPfc, 
                 caqCapabilityV08R0301Cat6KPfc2,
                 caqCapabilityV08R0301Cat6KPfc3
                 agent capability statements."
        REVISION        "200312190000Z"
        DESCRIPTION
                "Correct BITS syntax typo."
        REVISION        "200308251000Z"
        DESCRIPTION
                "Initial version of this MIB module."

        ::= { ciscoAgentCapability 325 }

caqCapabilityV08R0101Cat6KPfc AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.1(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices with PFC
                         card."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqIfAclConfigGroup,
                          caqAclCpbGroup,
                          caqIpAceGroup,
                          caqIpxAceGroup,
                          caqMacAceGroup,
                          caqActionGroup,
                          caqPolicingGroup,
                          caqQosMappingGroup,
                          caqQueueAssignmentGroup,
                          caqQueueGroup,
                          caqQosBridgedFlowPolicerGroup,
                          caqQosStatsGroup,
                          caqSecurityGroup, 
                          caqFlowPolicingCpbGroup,
                          caqQosStatsGroup2,
                          caqIfTrustDeviceGroup,
                          caqQosDefaultActionGroup,
                          caqIfAclConfigGroup2
                        }
        VARIATION       caqDscpMappingERPolicedDscp 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqAggPolicerERExceedPackets 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqSecurityAction 
            SYNTAX      INTEGER { permit(1), deny(2), redirect(3) } 
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

        VARIATION       caqClassifierMapDirection 
            SYNTAX      BITS { ingress(0) } 
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

    ::= { ciscoCatOSAclQosCapability 1 }

caqCapabilityV08R0101Cat6KPfc2 AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.1(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices with PFC2
                         card."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqIfAclConfigGroup,
                          caqAclCpbGroup,
                          caqIpAceGroup,
                          caqIpxAceGroup,
                          caqMacAceGroup,
                          caqActionGroup,
                          caqPolicingGroup,
                          caqQosExcessRateGroup,
                          caqQosMappingGroup,
                          caqQueueAssignmentGroup,
                          caqQueueGroup,
                          caqQosBridgedFlowPolicerGroup,
                          caqQosStatsGroup,
                          caqSecurityGroup, 
                          caqFlowPolicingCpbGroup,
                          caqQosStatsGroup2,
                          caqSecurityPBFGroup,
                          caqQosExcessBurstGroup,
                          caqIfTrustDeviceGroup,
                          caqLoggingGroup,
                          caqArpInspGroup,
                          caqSecurityRateLimitGroup,
                          caqQosDefaultActionGroup,
                          caqIfAclConfigGroup2
                        }
        VARIATION       caqClassifierMapDirection 
            SYNTAX      BITS { ingress(0) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

    ::= { ciscoCatOSAclQosCapability 2 }

caqCapabilityV08R0101Cat6KPfc3 AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.1(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices with PFC3
                         card."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqIfAclConfigGroup,
                          caqAclCpbGroup,
                          caqIpAceGroup,
                          caqMacAceGroup,
                          caqActionGroup,
                          caqPolicingGroup,
                          caqQosExcessRateGroup,
                          caqQosMappingGroup,
                          caqQueueAssignmentGroup,
                          caqQueueGroup,
                          caqQosBridgedFlowPolicerGroup,
                          caqQosStatsGroup,
                          caqSecurityGroup, 
                          caqFlowPolicingCpbGroup,
                          caqSecurityPBFGroup,
                          caqQosExcessBurstGroup,
                          caqIfTrustDeviceGroup,
                          caqLoggingGroup,
                          caqArpInspGroup,
                          caqSecurityRateLimitGroup,
                          caqDscpMutationGroup,
                          caqQosDefaultActionGroup,
                          caqIfAclConfigGroup2,
                          caqDscpRewriteGroup,
                          caqAggPolicerOctetStatsGroup
                        }

    ::= { ciscoCatOSAclQosCapability 3 }

caqCapabilityV08R0101Cat4K AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.1(1) on Catalyst 4000 series
                         devices."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqAclCpbGroup,
                          caqFlowPolicingCpbGroup,
                          caqQueueAssignmentGroup,
                          caqPolicingGroup
                        }

        VARIATION       caqIfTrustStateConfig 
            SYNTAX      INTEGER { trustCoS(2) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."
    
        VARIATION       caqFlowPolicerType 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqFlowPolicerNormalRateRequest
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqFlowPolicerNormalRateGrant 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqFlowPolicerBurstSizeRequest 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqFlowPolicerBurstSizeGrant 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqFlowPolicerNormalRateAction
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqFlowPolicerStatus 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

    ::= { ciscoCatOSAclQosCapability 4 }

caqCapabilityV08R0301Cat6KPfc AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.3(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices with PFC
                         card."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqIfAclConfigGroup,
                          caqAclCpbGroup,
                          caqIpAceGroup,
                          caqIpxAceGroup,
                          caqMacAceGroup,
                          caqActionGroup,
                          caqPolicingGroup,
                          caqQosMappingGroup,
                          caqQueueAssignmentGroup,
                          caqQueueGroup,
                          caqQosBridgedFlowPolicerGroup,
                          caqQosStatsGroup,
                          caqSecurityGroup, 
                          caqFlowPolicingCpbGroup,
                          caqQosStatsGroup2,
                          caqIfTrustDeviceGroup,
                          caqQosDefaultActionGroup,
                          caqIfAclConfigGroup2,
                          caqIpAceExtGroup 
                        }
        VARIATION       caqDscpMappingERPolicedDscp 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqAggPolicerERExceedPackets 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqSecurityAction 
            SYNTAX      INTEGER { permit(1), deny(2), redirect(3) } 
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

        VARIATION       caqClassifierMapDirection 
            SYNTAX      BITS { ingress(0) } 
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

    ::= { ciscoCatOSAclQosCapability 5 }

caqCapabilityV08R0301Cat6KPfc2 AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.3(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices with PFC2
                         card."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqIfAclConfigGroup,
                          caqAclCpbGroup,
                          caqIpAceGroup,
                          caqIpxAceGroup,
                          caqMacAceGroup,
                          caqActionGroup,
                          caqPolicingGroup,
                          caqQosExcessRateGroup,
                          caqQosMappingGroup,
                          caqQueueAssignmentGroup,
                          caqQueueGroup,
                          caqQosBridgedFlowPolicerGroup,
                          caqQosStatsGroup,
                          caqSecurityGroup, 
                          caqFlowPolicingCpbGroup,
                          caqQosStatsGroup2,
                          caqSecurityPBFGroup,
                          caqQosExcessBurstGroup,
                          caqIfTrustDeviceGroup,
                          caqLoggingGroup,
                          caqArpInspGroup,
                          caqSecurityRateLimitGroup,
                          caqQosDefaultActionGroup,
                          caqIfAclConfigGroup2,
                          caqIpAceExtGroup
                        }
        VARIATION       caqClassifierMapDirection 
            SYNTAX      BITS { ingress(0) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

    ::= { ciscoCatOSAclQosCapability 6 }

caqCapabilityV08R0301Cat6KPfc3 AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.3(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices with PFC3
                         card."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqIfAclConfigGroup,
                          caqAclCpbGroup,
                          caqIpAceGroup,
                          caqMacAceGroup,
                          caqActionGroup,
                          caqPolicingGroup,
                          caqQosExcessRateGroup,
                          caqQosMappingGroup,
                          caqQueueAssignmentGroup,
                          caqQueueGroup,
                          caqQosBridgedFlowPolicerGroup,
                          caqQosStatsGroup,
                          caqSecurityGroup, 
                          caqFlowPolicingCpbGroup,
                          caqSecurityPBFGroup,
                          caqQosExcessBurstGroup,
                          caqIfTrustDeviceGroup,
                          caqLoggingGroup,
                          caqArpInspGroup,
                          caqSecurityRateLimitGroup,
                          caqDscpMutationGroup,
                          caqQosDefaultActionGroup,
                          caqIfAclConfigGroup2,
                          caqDscpRewriteGroup,
                          caqAggPolicerOctetStatsGroup,
                          caqIpAceExtGroup,
                          caqIfSecurityAclConfigGroup
                        }

    ::= { ciscoCatOSAclQosCapability 7 }

caqCapabilityV08R0401Cat6KPfc AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.4(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices with PFC
                         card."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqIfAclConfigGroup,
                          caqAclCpbGroup,
                          caqIpAceGroup,
                          caqIpxAceGroup,
                          caqMacAceGroup,
                          caqActionGroup,
                          caqPolicingGroup,
                          caqQosMappingGroup,
                          caqQueueAssignmentGroup,
                          caqQueueGroup,
                          caqQosBridgedFlowPolicerGroup,
                          caqQosStatsGroup,
                          caqSecurityGroup, 
                          caqFlowPolicingCpbGroup,
                          caqQosStatsGroup2,
                          caqIfTrustDeviceGroup,
                          caqQosDefaultActionGroup,
                          caqIfAclConfigGroup2,
                          caqIpAceExtGroup 
                        }
        VARIATION       caqDscpMappingERPolicedDscp 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqAggPolicerERExceedPackets 
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       caqSecurityAction 
            SYNTAX      INTEGER { permit(1), deny(2), redirect(3) } 
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

        VARIATION       caqClassifierMapDirection 
            SYNTAX      BITS { ingress(0) } 
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

    ::= { ciscoCatOSAclQosCapability 8 }

caqCapabilityV08R0401Cat6KPfc2 AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.4(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices with PFC2
                         card."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqIfAclConfigGroup,
                          caqAclCpbGroup,
                          caqIpAceGroup,
                          caqIpxAceGroup,
                          caqMacAceGroup,
                          caqActionGroup,
                          caqPolicingGroup,
                          caqQosExcessRateGroup,
                          caqQosMappingGroup,
                          caqQueueAssignmentGroup,
                          caqQueueGroup,
                          caqQosBridgedFlowPolicerGroup,
                          caqQosStatsGroup,
                          caqSecurityGroup, 
                          caqFlowPolicingCpbGroup,
                          caqQosStatsGroup2,
                          caqSecurityPBFGroup,
                          caqQosExcessBurstGroup,
                          caqIfTrustDeviceGroup,
                          caqLoggingGroup,
                          caqArpInspGroup,
                          caqSecurityRateLimitGroup,
                          caqQosDefaultActionGroup,
                          caqIfAclConfigGroup2,
                          caqIpAceExtGroup,
                          caqAclHitCountGroup,
                          caqAclFeatureGroup,
                          caqVlanAclHitCountGroup
                        }
        VARIATION       caqClassifierMapDirection 
            SYNTAX      BITS { ingress(0) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

        VARIATION       caqAclFeatureCpb 
            SYNTAX      BITS { vlanAclHitCount(0) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

    ::= { ciscoCatOSAclQosCapability 9 }

caqCapabilityV08R0401Cat6KPfc3 AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.4(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices with PFC3
                         card."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqIfAclConfigGroup,
                          caqAclCpbGroup,
                          caqIpAceGroup,
                          caqMacAceGroup,
                          caqActionGroup,
                          caqPolicingGroup,
                          caqQosExcessRateGroup,
                          caqQosMappingGroup,
                          caqQueueAssignmentGroup,
                          caqQueueGroup,
                          caqQosBridgedFlowPolicerGroup,
                          caqQosStatsGroup,
                          caqSecurityGroup, 
                          caqFlowPolicingCpbGroup,
                          caqSecurityPBFGroup,
                          caqQosExcessBurstGroup,
                          caqIfTrustDeviceGroup,
                          caqLoggingGroup,
                          caqArpInspGroup,
                          caqSecurityRateLimitGroup,
                          caqDscpMutationGroup,
                          caqQosDefaultActionGroup,
                          caqIfAclConfigGroup2,
                          caqDscpRewriteGroup,
                          caqAggPolicerOctetStatsGroup,
                          caqIpAceExtGroup,
                          caqIfSecurityAclConfigGroup,
                          caqAclHitCountGroup,
                          caqAclFeatureGroup,
                          caqPortAclHitCountGroup,
                          caqVlanAclHitCountGroup
                        }

        VARIATION       caqAclHitCountAclType 
            SYNTAX      INTEGER { ipSecurity(1), macSecurity(3) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

        VARIATION       caqAceHitCountAclType 
            SYNTAX      INTEGER { ipSecurity(1), macSecurity(3) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

        VARIATION       caqIfAclHitCountAclType 
            SYNTAX      INTEGER { ipSecurity(1), macSecurity(3) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

    ::= { ciscoCatOSAclQosCapability 10 }

caqCapabilityV08R0401Cat6KPfc3b AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.4(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices with PFC3B
                         or PFC3BXL card."
    STATUS              current
    DESCRIPTION         "CISCO-CATOS-ACL-QOS-MIB agent capabilities."

    SUPPORTS            CISCO-CATOS-ACL-QOS-MIB
        INCLUDES        { caqIfConfigGroup,
                          caqIfAclConfigGroup,
                          caqAclCpbGroup,
                          caqIpAceGroup,
                          caqMacAceGroup,
                          caqActionGroup,
                          caqPolicingGroup,
                          caqQosExcessRateGroup,
                          caqQosMappingGroup,
                          caqQueueAssignmentGroup,
                          caqQueueGroup,
                          caqQosBridgedFlowPolicerGroup,
                          caqQosStatsGroup,
                          caqSecurityGroup, 
                          caqFlowPolicingCpbGroup,
                          caqSecurityPBFGroup,
                          caqQosExcessBurstGroup,
                          caqIfTrustDeviceGroup,
                          caqLoggingGroup,
                          caqArpInspGroup,
                          caqSecurityRateLimitGroup,
                          caqDscpMutationGroup,
                          caqQosDefaultActionGroup,
                          caqIfAclConfigGroup2,
                          caqDscpRewriteGroup,
                          caqAggPolicerOctetStatsGroup,
                          caqIpAceExtGroup,
                          caqIfSecurityAclConfigGroup,
                          caqAclHitCountGroup,
                          caqMacAceExtGroup,
                          caqMacPktClassifyVlanGroup,
                          caqAclFeatureGroup,
                          caqPortAclHitCountGroup,
                          caqVlanAclHitCountGroup
                        }

        VARIATION       caqAclHitCountAclType 
            SYNTAX      INTEGER { ipSecurity(1), macSecurity(3) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

        VARIATION       caqAceHitCountAclType 
            SYNTAX      INTEGER { ipSecurity(1), macSecurity(3) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

        VARIATION       caqIfAclHitCountAclType 
            SYNTAX      INTEGER { ipSecurity(1), macSecurity(3) }
            DESCRIPTION "Only limited set of enumerated values
                         are supported."

    ::= { ciscoCatOSAclQosCapability 11 }

END