CISCO-CCM-CAPABILITY device MIB details by Cisco
CISCO-CCM-CAPABILITY file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-CCM-CAPABILITY.
Vendor: | Cisco |
---|---|
Mib: | CISCO-CCM-CAPABILITY [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- CISCO-CCM-CAPABILITY.my: Cisco CCM AGENT-CAPABILITIES -- -- June 18, 2001 - Priya Mollyn -- -- Copyright (c) 1999, 2000, 2001, 2002, 2003 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** CISCO-CCM-CAPABILITY DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI AGENT-CAPABILITIES FROM SNMPv2-CONF MacAddress FROM SNMPv2-TC CcmIndexOrZero FROM CISCO-CCM-MIB ciscoAgentCapability FROM CISCO-SMI; ciscoCCMCapability MODULE-IDENTITY LAST-UPDATED "200310030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-selsius@cisco.com" DESCRIPTION "Agent capabilities for CISCO-CCM-MIB" REVISION "200310030000Z" DESCRIPTION "Added the agent capabilities for Cisco Call Manager 4.0 release." REVISION "200203210000Z" DESCRIPTION "Added the agent capabilities for Cisco Call Manager 3.3 release." REVISION "200107020000Z" DESCRIPTION "Added the agent capabilities for Cisco Call Manager 3.0 release." REVISION "200106190000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoAgentCapability 211 } ciscoCCMCapabilityV3R00 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco Call Manager 3.0" STATUS current DESCRIPTION "Cisco Call Manager Agent capabilities" SUPPORTS CISCO-CCM-MIB INCLUDES { ccmInfoGroup, ccmPhoneInfoGroup, ccmGatewayInfoGroup } VARIATION ccmPhoneE911Location ACCESS not-implemented DESCRIPTION "ccmPhoneE911Location is not supported" VARIATION ccmPhoneLastError ACCESS not-implemented DESCRIPTION "ccmPhoneLastError is not supported" VARIATION ccmPhoneTimeLastError ACCESS not-implemented DESCRIPTION "ccmPhoneTimeLastError is not supported" VARIATION ccmPhoneDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmPhoneDevicePoolIndex is not supported" VARIATION ccmGatewayDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmGatewayDevicePoolIndex is not supported" VARIATION ccmGatewayTrunkIndex ACCESS not-implemented DESCRIPTION "ccmGatewayTrunkIndex is not supported" VARIATION ccmGatewayTrunkType ACCESS not-implemented DESCRIPTION "ccmGatewayTrunkType is not supported" VARIATION ccmGatewayTrunkName ACCESS not-implemented DESCRIPTION "ccmGatewayTrunkName is not supported" VARIATION ccmTrunkGatewayIndex ACCESS not-implemented DESCRIPTION "ccmTrunkGatewayIndex is not supported" VARIATION ccmGatewayTrunkStatus ACCESS not-implemented DESCRIPTION "ccmGatewayTrunkStatus is not supported" ::= { ciscoCCMCapability 1 } ciscoCCMCapabilityV3R01 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco Call Manager 3.1" STATUS current DESCRIPTION "Cisco Call Manager Agent capabilities" SUPPORTS CISCO-CCM-MIB INCLUDES { ccmInfoGroupRev1, ccmPhoneInfoGroupRev1, ccmGatewayInfoGroupRev1, ccmMediaDeviceInfoGroup, ccmGatekeeperInfoGroup, ccmCTIDeviceInfoGroup, ccmNotificationsInfoGroup, ccmNotificationsGroup } VARIATION ccmPhoneE911Location ACCESS not-implemented DESCRIPTION "ccmPhoneE911Location is not supported" VARIATION ccmPhoneLastError ACCESS not-implemented DESCRIPTION "ccmPhoneLastError is not supported" VARIATION ccmPhoneTimeLastError ACCESS not-implemented DESCRIPTION "ccmPhoneTimeLastError is not supported" VARIATION ccmPhoneDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmPhoneDevicePoolIndex is not supported" VARIATION ccmGatewayDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmGatewayDevicePoolIndex is not supported" VARIATION ccmMediaDeviceDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmMediaDeviceDevicePoolIndex is not supported" VARIATION ccmGatekeeperDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmGatekeeperDevicePoolIndex is not supported" VARIATION ccmCTIDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmCTIDevicePoolIndex is not supported" VARIATION ccmCTIDeviceAppInfo ACCESS not-implemented DESCRIPTION "ccmCTIDeviceAppInfo is not supported" VARIATION ccmPhonePhysicalAddress SYNTAX MacAddress DESCRIPTION "Represents the MAC address of the phone" ::= { ciscoCCMCapability 2 } ciscoCCMCapabilityV3R03 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco Call Manager 3.3" STATUS obsolete -- superseded by -- ciscoCCMCapabilityV3R03Rev1 DESCRIPTION "Cisco Call Manager Agent capabilities" SUPPORTS CISCO-CCM-MIB INCLUDES { ccmInfoGroupRev2, ccmPhoneInfoGroupRev2, ccmGatewayInfoGroupRev2, ccmMediaDeviceInfoGroupRev1, ccmCTIDeviceInfoGroupRev1, ccmNotificationsInfoGroupRev1, ccmNotificationsGroup, ccmH323DeviceInfoGroup, ccmVoiceMailDeviceInfoGroup } VARIATION ccmPhoneE911Location ACCESS not-implemented DESCRIPTION "ccmPhoneE911Location is not supported" VARIATION ccmPhoneDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmPhoneDevicePoolIndex is not supported" VARIATION ccmGatewayDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmGatewayDevicePoolIndex is not supported" VARIATION ccmMediaDeviceDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmMediaDeviceDevicePoolIndex is not supported" VARIATION ccmCTIDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmCTIDevicePoolIndex is not supported" VARIATION ccmPhoneFailedTable DESCRIPTION "The table containing the list of all phones which attempted to register with the local call manager and failed. The entries which have not been updated and kept at least for the duration specified in the ccmPhoneFailedStorePeriod will be deleted. Reasons for these failures could be due to configuration error, maximum number of phones has been reached, lost contact, etc." VARIATION ccmPhoneStatusUpdateTableStateId DESCRIPTION "The current state of ccmPhoneStatusUpdateTable. The initial value of this object is 0 and it will be incremented everytime when there is a change (addition/deletion/modification) to the ccmPhoneStatusUpdateTable. This value and sysUpTime should be used together to find if the table has changed or not. When the SNMP service is restarted this value will be reset to 0." VARIATION ccmPhStatUpdtTblLastAddedIndex SYNTAX CcmIndexOrZero DESCRIPTION "The ccmPhoneStatusUpdateIndex value of the last entry that was added to the ccmPhoneStatusUpdateTable. This value together with sysUpTime can be used by the manager applications to identify the new entries in the ccmPhoneStatusUpdateTable since their last poll. This value need not be the same as the highest index in the ccmPhoneStatusUpdateTable as the index could have wrapped around. The initial value of this object is 0 which indicates that there has been no entries added to this table. When the SNMP service is restarted this value will be reset to 0." VARIATION ccmPhFailedTblLastAddedIndex SYNTAX CcmIndexOrZero DESCRIPTION "The ccmPhoneFailedIndex value of the last entry that was added to the ccmPhoneFailedTable. This value together with sysUpTime can be used by the manager applications to identify the new entries in the ccmPhoneFailedTable since their last poll. This value need not be the same as the highest index in the ccmPhoneFailedTable as the index could have wrapped around. The initial value of this object is 0 which indicates that there has been no entries added to this table. When the SNMP service is restarted this value will be reset to 0." VARIATION ccmPhoneFailedStorePeriod DESCRIPTION "The time duration for storing each entry in the ccmPhoneFailedTable. The entries which have not been updated and kept at least this period will be deleted. This value should ideally be set to a higher value than the ccmPhoneFailedAlarmInterval object. The default value is 1800 seconds." ::= { ciscoCCMCapability 3 } ciscoCCMCapabilityV3R03Rev1 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco Call Manager 3.3" STATUS current DESCRIPTION "Cisco Call Manager Agent capabilities" SUPPORTS CISCO-CCM-MIB INCLUDES { ccmInfoGroupRev2, ccmPhoneInfoGroupRev2, ccmGatewayInfoGroupRev2, ccmMediaDeviceInfoGroupRev1, ccmCTIDeviceInfoGroupRev1, ccmNotificationsInfoGroupRev1, ccmNotificationsGroup, ccmH323DeviceInfoGroup, ccmVoiceMailDeviceInfoGroup } VARIATION ccmPhoneE911Location ACCESS not-implemented DESCRIPTION "ccmPhoneE911Location is not supported" VARIATION ccmPhoneDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmPhoneDevicePoolIndex is not supported" VARIATION ccmGatewayDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmGatewayDevicePoolIndex is not supported" VARIATION ccmMediaDeviceDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmMediaDeviceDevicePoolIndex is not supported" VARIATION ccmCTIDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmCTIDevicePoolIndex is not supported" ::= { ciscoCCMCapability 4 } ciscoCCMCapabilityV4R00 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco Call Manager 4.0" STATUS current DESCRIPTION "Cisco Call Manager Agent capabilities" SUPPORTS CISCO-CCM-MIB INCLUDES { ccmInfoGroupRev3, ccmPhoneInfoGroupRev3, ccmGatewayInfoGroupRev3, ccmMediaDeviceInfoGroupRev2, ccmCTIDeviceInfoGroupRev2, ccmNotificationsInfoGroupRev2, ccmNotificationsGroupRev1, ccmH323DeviceInfoGroupRev1, ccmVoiceMailDeviceInfoGroupRev1, ccmSIPDeviceInfoGroup } VARIATION ccmPhoneE911Location ACCESS not-implemented DESCRIPTION "ccmPhoneE911Location is not supported" VARIATION ccmPhoneDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmPhoneDevicePoolIndex is not supported" VARIATION ccmGatewayDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmGatewayDevicePoolIndex is not supported" VARIATION ccmMediaDeviceDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmMediaDeviceDevicePoolIndex is not supported" VARIATION ccmCTIDevicePoolIndex ACCESS not-implemented DESCRIPTION "ccmCTIDevicePoolIndex is not supported" ::= { ciscoCCMCapability 5 } END