CISCO-CHANNEL-MIB device MIB details by Cisco
CISCO-CHANNEL-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-CHANNEL-MIB.
| Vendor: | Cisco |
|---|---|
| Mib: | CISCO-CHANNEL-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- CISCO-CHANNEL-MIB.my: Cisco IBM channel mib -- -- July 1994, Mauro D. Zallocco -- -- Copyright (c) 1994-1997, 1998 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- CISCO-CHANNEL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Counter64, Integer32, IpAddress, TimeTicks FROM SNMPv2-SMI DisplayString, TruthValue, TimeStamp, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ciscoMgmt FROM CISCO-SMI ; channel MODULE-IDENTITY LAST-UPDATED "9703260000Z" ORGANIZATION "cisco IBM engineering Working Group" CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: tac@cisco.com" DESCRIPTION "This is the MIB module for objects used to manage the Cisco Mainframe Channel Connection (CMCC) cards." REVISION "9801060000Z" DESCRIPTION "With the addition of Cisco's new Channel Port Adapter cards, all the references to CIP in the MIB description and object descriptions are changed to CMCC (Cisco Mainframe Channel Connection). The object names in the form of cip... or cipCard... will remain the same, but will be valid objects for the Channel Port Adapter cards." REVISION "9808140000Z" DESCRIPTION "Added cipCardSubChannelResetEvent to cipCardSubChannelTable Added cipCardSubChannelShortBusy to cipCardSubChannelTable Added cipCardSubChannelCMDRetry to cipCardSubChannelTable Added cipCardSubChannelBufferWait to cipCardSubChannelTable Added cipCardSubChannelStatPending to cipCardSubChannelTable Added cipCardSubChannelSuspend to cipCardSubChannelTable Added cipCardSubChannelFBLWait to cipCardSubChannelTable" REVISION "9703260000Z" DESCRIPTION "Added cipCardEntryCpuLoad1m to cipCardTable Added cipCardEntryCpuLoad5m to cipCardTable Added cipCardEntryCpuLoad60m to cipCardTable Added cipCardEntryDmaLoad1m to cipCardTable Added cipCardEntryDmaLoad5m to cipCardTable Added cipCardEntryDmaLoad60m to cipCardTable Added cipCardDtrBrdChannelLoad1m to cipCardDaughterBoardTable Added cipCardDtrBrdChannelLoad5m to cipCardDaughterBoardTable Added cipCardDtrBrdChannelLoad60m to cipCardDaughterBoardTable Added cipCardClawConfigBroadcastEnable to cipCardClawConfigTable Added cipCardClawConfigRowStatus to cipCardClawConfigTable Enhanced the description for cipCardEntryCpuUtilization" REVISION "9606130000Z" DESCRIPTION "Add cipCardSubChannelCmdRetries to cipCardSubChannelTable Add cipCardDtrBrdLastStat and cipCardDtrBrdNextStat to cipCardDaughterBoardTable." REVISION "9509250000Z" DESCRIPTION "Added cipCardApplicationTable. Added conformance section. Added cipCardEntryMajorSwRevisionNr, cipCardEntryMinorSwRevisionNr, cipCardEntryMajorHwRevisionNr and cipCardEntryMinorHwRevisionNr to cipCardTable. Enhanced the description for cipCardSubChannelIndex, cipCardClawConfigPath, cipCardClawConfigDevice, cipCardClawConfigIpAddr" REVISION "9411170000Z" DESCRIPTION "Changed from CHANNEL-MIB to CISCO-CHANNEL-MIB." ::= { ciscoMgmt 20 } cipCard OBJECT IDENTIFIER ::= { channel 1 } cipCardTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of values for the CMCC card which can be accessed to determine the general state of the CMCC. This table extends CardTable in the cisco.mib" ::= {cipCard 1} cipCardEntry OBJECT-TYPE SYNTAX CipCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of values for a CMCC Card. This extends cardTableEntry in the cisco.mib" INDEX { cipCardEntryIndex } ::= { cipCardTable 1 } CipCardEntry ::= SEQUENCE { cipCardEntryIndex Integer32 (0..2147483647), cipCardEntryName DisplayString (SIZE (1..32)), cipCardEntryTotalMemory Integer32, cipCardEntryFreeMemory Integer32, cipCardEntryCpuUtilization INTEGER, cipCardEntryTimeSinceLastReset Counter32, cipCardEntryMajorSwRevisionNr Integer32, cipCardEntryMinorSwRevisionNr Integer32, cipCardEntryMajorHwRevisionNr Integer32, cipCardEntryMinorHwRevisionNr Integer32, cipCardEntryCpuLoad1m INTEGER, cipCardEntryCpuLoad5m INTEGER, cipCardEntryCpuLoad60m INTEGER, cipCardEntryDmaLoad1m INTEGER, cipCardEntryDmaLoad5m INTEGER, cipCardEntryDmaLoad60m INTEGER } cipCardEntryIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index into cardTable (not physical chassis slot number, matches cisco chassis MIB cardindex)." ::= { cipCardEntry 1 } cipCardEntryName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The configured name for the CMCC." ::= {cipCardEntry 2} cipCardEntryTotalMemory OBJECT-TYPE SYNTAX Integer32 UNITS "kilo bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total memory on the card." ::= {cipCardEntry 3} cipCardEntryFreeMemory OBJECT-TYPE SYNTAX Integer32 UNITS "kilo bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total free memory on the card, that is the amount of memory not in use." ::= {cipCardEntry 4} cipCardEntryCpuUtilization OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The average, over the last minute, of the percentage of time that this processor was running. This includes time spent on non-productive polling and time used by routine maintenance tasks. This value is not a measure of the processor's ability to handle more work, which is represented by the cipCardEntryCpuLoad information. The ability to handle more work could also be affected by DMA and channel load, represented by the cipCardEntryDmaLoad and cipCardDtrBrd- ChannelAdapterLoad statistics." ::= {cipCardEntry 5} cipCardEntryTimeSinceLastReset OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time the CMCC card has been running." ::= {cipCardEntry 6} cipCardEntryMajorSwRevisionNr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The major software revision number for the software loaded on the CMCC card." ::= {cipCardEntry 7} cipCardEntryMinorSwRevisionNr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minor software revision number for the software loaded on the CMCC card." ::= {cipCardEntry 8} cipCardEntryMajorHwRevisionNr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The major hardware revision number for the software loaded on the CMCC card." ::= {cipCardEntry 9} cipCardEntryMinorHwRevisionNr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minor hardware revision number for the software loaded on the CMCC card." ::= {cipCardEntry 10} cipCardEntryCpuLoad1m OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The average, over the last minute, of the percentage of time that this processor was utilized to transfer data. It does not include idle time or time used by routine maintenance tasks." ::= {cipCardEntry 11} cipCardEntryCpuLoad5m OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The average, over the last 5 minutes, of the percentage of time that this processor was utilized to transfer data. It does not include idle time or time used by routine maintenance tasks." ::= {cipCardEntry 12} cipCardEntryCpuLoad60m OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The average, over the last 60 minutes, of the percentage of time that this processor was utilized to transfer data. It does not include idle time or time used by routine maintenance tasks." ::= {cipCardEntry 13} cipCardEntryDmaLoad1m OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The average, over the last minute, of the percentage of time the DMA controller was being used to transfer data between the CMCC card and the route processor." ::= {cipCardEntry 14} cipCardEntryDmaLoad5m OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The average, over the last 5 minutes, of the percentage of time the DMA controller was being used to transfer data between the CMCC card and the route processor." ::= {cipCardEntry 15} cipCardEntryDmaLoad60m OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The average, over the last 60 minutes, of the percentage of time the DMA controller was being used to transfer data between the CMCC card and the route processor." ::= {cipCardEntry 16} -- ;;;;;;;;;;;;;;;;;;;;;;; cipCardApplicationTable ;;;;;;;;;;;;;;;;;;;;;;;;; cipCardApplicationTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCardApplicationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the applications loaded on the CMCC card." ::= {cipCard 6} cipCardApplicationEntry OBJECT-TYPE SYNTAX CipCardApplicationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of application information." INDEX { cipCardEntryIndex, cipCardApplicationNameIndex } ::= { cipCardApplicationTable 1 } CipCardApplicationEntry ::= SEQUENCE { cipCardApplicationNameIndex DisplayString (SIZE (32)), cipCardApplicationRevision Integer32, cipCardApplicationCompileInfo DisplayString (SIZE (1..64)) } cipCardApplicationNameIndex OBJECT-TYPE SYNTAX DisplayString(SIZE (32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The application name." ::= {cipCardApplicationEntry 1} cipCardApplicationRevision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The application's software revision number." ::= {cipCardApplicationEntry 2} cipCardApplicationCompileInfo OBJECT-TYPE SYNTAX DisplayString(SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The application's compilation information (date and user-id)" ::= {cipCardApplicationEntry 3} -- ;;;;;;;;;;;;;;;;;;;;;;; cipCardDaughterBoardTable ;;;;;;;;;;;;;;;;;;;;;;;;; cipCardDaughterBoardTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCardDaughterBoardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of objects pertaining to the daughter board on the CMCC card." ::= {cipCard 2} cipCardDaughterBoardEntry OBJECT-TYPE SYNTAX CipCardDaughterBoardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of daughter board values." INDEX { cipCardEntryIndex, cipCardDtrBrdIndex } ::= { cipCardDaughterBoardTable 1 } CipCardDaughterBoardEntry ::= SEQUENCE { cipCardDtrBrdIndex Integer32 (0..2147483647), cipCardDtrBrdType INTEGER, cipCardDtrBrdStatus TruthValue, cipCardDtrBrdSignal TruthValue, cipCardDtrBrdOnline TruthValue, implicitIncidents Counter32, codeViolationErrors Counter32, linkFailureSignalOrSyncLoss Counter32, linkFailureNOSs Counter32, linkFailureSequenceTimeouts Counter32, linkFailureInvalidSequences Counter32, linkIncidentTrapCause INTEGER, cipCardDtrBrdLastStat TimeTicks, cipCardDtrBrdNextStat TimeTicks, cipCardDtrBrdChannelLoad1m INTEGER, cipCardDtrBrdChannelLoad5m INTEGER, cipCardDtrBrdChannelLoad60m INTEGER } cipCardDtrBrdIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This indicates which daughter board is is being referenced for a particular CMCC card." ::= {cipCardDaughterBoardEntry 1} cipCardDtrBrdType OBJECT-TYPE SYNTAX INTEGER { escon (1), -- Enterprise System Connection busAndTag (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the channel path interface type." ::= {cipCardDaughterBoardEntry 2} cipCardDtrBrdStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "cipCardDtrBrdStatus is true when the microcode for the daughter board has been successfully loaded and is executing, false otherwise." ::= {cipCardDaughterBoardEntry 3} cipCardDtrBrdSignal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "For ESCON, cipCardDtrBrdSignal is true when light has been seen on the fiber and synchronization has been established, false otherwise. For the Parallel Channel Adapter (PCA) which provides the Bus and Tag connection, cipCardDtrBrdSignal is true when Operational out has been sensed, false otherwise." ::= {cipCardDaughterBoardEntry 4} cipCardDtrBrdOnline OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "For ESCON, cipCardDtrBrdOnline is true when a path has been established with at least one channel, false otherwise. For PCA, cipCardDtrBrdOnline is true when the PCA is online to the channel. It will respond to at least one device address" ::= {cipCardDaughterBoardEntry 5} implicitIncidents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counts the number of times the ESCON Processor recovers from an internal error." ::= {cipCardDaughterBoardEntry 6} codeViolationErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recognized code-violation errors. A trap is issued when this number exceeds the bit error rate threshold for ESCON. The bit error rate threshold is set at 15 error burst within a 5 minute period. An error burst is the time period of 1.5 seconds plus or minus 0.05 seconds during which one or more code violations errors occur." ::= {cipCardDaughterBoardEntry 7} linkFailureSignalOrSyncLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of link failures recognized as a result of a loss of signal or loss of synchronization that persisted longer than the link interval duration, the link interval duration is one second with a tolerance of +1.5 seconds and -0 seconds." ::= {cipCardDaughterBoardEntry 8} linkFailureNOSs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of link failures recognized as a result of the not-operational sequence (NOS)." ::= {cipCardDaughterBoardEntry 9} linkFailureSequenceTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of link failures recognized as a result of a connection recovery timeout or response timeout occurring while in transmit OLS state." ::= {cipCardDaughterBoardEntry 10} linkFailureInvalidSequences OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of link failures recognized as a result of an invalid sequence for Link-Level-Facility State. Either a UD or UDR sequence was recognized while in wait-for-offline-sequence state." ::= {cipCardDaughterBoardEntry 11} linkIncidentTrapCause OBJECT-TYPE SYNTAX INTEGER { liOther (1), liStatus (2), liImplicitIncidents (3), liBERthreshold (4), liSignalOrSyncLoss (5), liNotOperationalSequence (6), liSequenceTimeouts (7), liInvalidSequences (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the reason for the last link failure. liStatus indicates that the daughter board status has changed. liImplicitIncident indicates that a condition which may cause the recognition of a link incident in the attached node has been recognized. liBERthreshold indicates that the code violation error rate exceeded the threshold. liSignalOrSyncLoss indicates a loss of signal or loss of synchronization that persisted longer than the link interval duration. liNotOperationalSequence indicates the recognition of not-operational sequence, usually due to the operator taking the channel offline. liSequenceTimeout indicates a connection recovery timeout or response timeout occurring while in transmit OLS state. linvalidSequence indicates a UD or UDR sequence was recognized while in wait-for-offline-sequence state. " ::= {cipCardDaughterBoardEntry 12} cipCardDtrBrdLastStat OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates how old the statistics are." ::= {cipCardDaughterBoardEntry 13} cipCardDtrBrdNextStat OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates when statistics will next be read." ::= {cipCardDaughterBoardEntry 14} cipCardDtrBrdChannelLoad1m OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The average, over the last minute, of the percentage of time the channel adapter was busy communicating to a host." ::= {cipCardDaughterBoardEntry 15} cipCardDtrBrdChannelLoad5m OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The average, over the last 5 minutes, of the percentage of time the channel adapter was busy communicating to a host." ::= {cipCardDaughterBoardEntry 16} cipCardDtrBrdChannelLoad60m OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The average, over the last 60 minutes, of the percentage of time the channel adapter was busy communicating to a host." ::= {cipCardDaughterBoardEntry 17} -- ;;;;;;;;;;;;;;;;;;;;;;;;;;; cipCardSubChannelTable ;;;;;;;;;;;;;;;;;;;; cipCardSubChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCardSubChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of objects pertaining to each host connection." ::= {cipCard 3} cipCardSubChannelEntry OBJECT-TYPE SYNTAX CipCardSubChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of host connection statistics." INDEX { cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex } ::= { cipCardSubChannelTable 1 } CipCardSubChannelEntry ::= SEQUENCE { cipCardSubChannelIndex Integer32 (0..2147483647), cipCardSubChannelConnections Counter32, cipCardSubChannelCancels Counter32, cipCardSubChannelSelectiveResets Counter32, cipCardSubChannelSystemResets Counter32, cipCardSubChannelDeviceErrors Counter32, cipCardSubChannelWriteBlocksDropped Counter32, cipCardSubChannelLastSenseData OCTET STRING (SIZE (2)), cipCardSubChannelLastSenseDataTime TimeStamp, cipCardSubChannelCuBusies Counter32, cipCardSubChannelCmdRetries Counter32, cipCardSubChannelResetEvent TruthValue, cipCardSubChannelShortBusy TruthValue, cipCardSubChannelCMDRetry TruthValue, cipCardSubChannelBufferWait TruthValue, cipCardSubChannelStatPending TruthValue, cipCardSubChannelSuspend TruthValue, cipCardSubChannelFBLWait TruthValue } cipCardSubChannelIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates which subchannel is being referenced for a particular daughter board on a CMCC card. This value is constructed as follows: path * 256 + device Path and device are the values in CipCardClawConfigTable." ::= {cipCardSubChannelEntry 1} cipCardSubChannelConnections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times a device was connected to the subchannel. For some devices, this correlates with the number of start subchannels." ::= {cipCardSubChannelEntry 2} cipCardSubChannelCancels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of halt subchannels." ::= {cipCardSubChannelEntry 3} cipCardSubChannelSelectiveResets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of selective resets." ::= {cipCardSubChannelEntry 4} cipCardSubChannelSystemResets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of system resets." ::= {cipCardSubChannelEntry 5} cipCardSubChannelDeviceErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of device level errors." ::= {cipCardSubChannelEntry 6} cipCardSubChannelWriteBlocksDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times a block was received by the channel and a router buffer was not available so the block was discarded." ::= {cipCardSubChannelEntry 7} cipCardSubChannelLastSenseData OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the last sense data sent to the channel by this device." ::= {cipCardSubChannelEntry 8} cipCardSubChannelLastSenseDataTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the time when the last sense data was sent to the channel by this device." ::= {cipCardSubChannelEntry 9} cipCardSubChannelCuBusies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of control unit busies sent to the channel when this device was requested." ::= {cipCardSubChannelEntry 10} cipCardSubChannelCmdRetries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the subchannel went into command retry state. The sum of this value and cipCardSubChannelConnections gives the number of start subchannels." ::= {cipCardSubChannelEntry 11} cipCardSubChannelResetEvent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A state that a device gets into after a system reset and is cleared by a resetting event unit check." ::= {cipCardSubChannelEntry 12} cipCardSubChannelShortBusy OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A transient state that a device can get into during processing of various resets." ::= {cipCardSubChannelEntry 13} cipCardSubChannelCMDRetry OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A state that a device can get into if the mainframe tries to write data to the CMCC when the CMCC has no buffers for it or if the mainframe performs a read operation and the CMCC doesn't have any data to send." ::= {cipCardSubChannelEntry 14} cipCardSubChannelBufferWait OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A state that a device can get into when the mainframe tries to write data to the CMCC and the CMCC has no buffers for all of the write operation." ::= {cipCardSubChannelEntry 15} cipCardSubChannelStatPending OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the CMCC has status to present for a particular device. The indication is cleared when the mainframe excepts the status." ::= {cipCardSubChannelEntry 16} cipCardSubChannelSuspend OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the device task has decided to suspend data transfer for a particular device." ::= {cipCardSubChannelEntry 17} cipCardSubChannelFBLWait OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A state that a device can get into when the mainframe tries to write data to the CMCC and the CMCC has no buffers for all of the write operation." ::= {cipCardSubChannelEntry 18} -- ;;;;;;;;;;;;;;;;;;;;; Claw Related objects ;;;;;;;;;;;;;;;;;;;;;;;;;;; cipCardClaw OBJECT IDENTIFIER ::= {cipCard 4} -- ;;;;;;;;;;;;;;;;;;;;; cipCardClawTable ;;;;;;;;;;;;;;;;;;;;;;;;;;; cipCardClawTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCardClawEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains status and other information not covered in the following tables for the Common Link Access to Workstation (CLAW) protocol." ::= {cipCardClaw 1} cipCardClawEntry OBJECT-TYPE SYNTAX CipCardClawEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of CLAW values." INDEX { cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex, cipCardClawIndex } ::= { cipCardClawTable 1 } CipCardClawEntry ::= SEQUENCE { cipCardClawIndex Integer32 (0..2147483647), cipCardClawConnected TruthValue } cipCardClawIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates which CLAW link is being referenced for a particular subchannel on a daughter board on a CMCC card." ::= {cipCardClawEntry 1} cipCardClawConnected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates CLAW connection status." ::= {cipCardClawEntry 2} -- ;;;;;;;;;;;;;;;;;;;;; cipCardClawConfigTable ;;;;;;;;;;;;;;;;;;;;;;;;;;; cipCardClawConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCardClawConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration information for the Common Link Access to Workstation (CLAW) protocol." ::= {cipCardClaw 2} cipCardClawConfigEntry OBJECT-TYPE SYNTAX CipCardClawConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of CLAW configuration values." INDEX { cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex, cipCardClawIndex } ::= { cipCardClawConfigTable 1 } CipCardClawConfigEntry ::= SEQUENCE { cipCardClawConfigPath OCTET STRING (SIZE(2)), cipCardClawConfigDevice OCTET STRING (SIZE(2)), cipCardClawConfigIpAddr IpAddress, cipCardClawConfigHostName DisplayString (SIZE (1..10)), cipCardClawConfigRouterName DisplayString (SIZE (1..10)), cipCardClawConfigHostAppl DisplayString (SIZE (1..10)), cipCardClawConfigRouterAppl DisplayString (SIZE (1..10)), cipCardClawConfigBroadcastEnable TruthValue, cipCardClawConfigRowStatus RowStatus } cipCardClawConfigPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-create STATUS current DESCRIPTION "Hex path identifier for the escon director switch port containing the fiber from the channel on the host to which this CMCC CLAW task connects. This is a concatenation of the switch port number, the channel logical address (used by the host to associate an logical partition (LPAR) with the control unit), and the control unit logical address (address of a logical control unit used by the host to associate a group of physical devices). For a directly connected channel, the switch port number is usually 01." ::= {cipCardClawConfigEntry 1} cipCardClawConfigDevice OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-create STATUS current DESCRIPTION "Two digit hex device address for the device the SNA host will use to communicate with the CLAW task on the CMCC card. The address must be even." ::= {cipCardClawConfigEntry 2} cipCardClawConfigIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of the host application for the CMCC CLAW task as specified in the HOME statement of the PROFILE TCPIP." ::= {cipCardClawConfigEntry 3} cipCardClawConfigHostName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "CLAW host name for this CLAW device." ::= {cipCardClawConfigEntry 4} cipCardClawConfigRouterName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "CLAW router name for this CLAW device." ::= {cipCardClawConfigEntry 5} cipCardClawConfigHostAppl OBJECT-TYPE SYNTAX DisplayString(SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "CLAW host application name for this CLAW connection." ::= {cipCardClawConfigEntry 6} cipCardClawConfigRouterAppl OBJECT-TYPE SYNTAX DisplayString(SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "CLAW router application name for this CLAW connection." ::= {cipCardClawConfigEntry 7} cipCardClawConfigBroadcastEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Control processing of broadcast frames for the path/device. Enable turns broadcast processing on." ::= {cipCardClawConfigEntry 8} cipCardClawConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used by a management station to create or delete the row entry in cipCardClawConfigTable following the RowStatus textual convention." ::= {cipCardClawConfigEntry 9} -- ;;;;;;;;;;;;;;;;;;;;;;;;;;; cipCardClawDataXferStatsTable ;;;;;;;;;;;;;;;;; cipCardClawDataXferStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCardClawDataXferStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of objects pertaining to data transfer statistics per CLAW Logical Link." ::= {cipCardClaw 3} cipCardClawDataXferStatsEntry OBJECT-TYPE SYNTAX CipCardClawDataXferStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of daughter board statistics." INDEX { cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex, cipCardClawIndex } ::= { cipCardClawDataXferStatsTable 1 } CipCardClawDataXferStatsEntry ::= SEQUENCE { cipCardClawDataXferStatsBlocksRead Counter32, cipCardClawDataXferStatsBlocksWritten Counter32, cipCardClawDataXferStatsBytesRead Counter32, cipCardClawDataXferStatsHCBytesRead Counter64, cipCardClawDataXferStatsBytesWritten Counter32, cipCardClawDataXferStatsHCBytesWritten Counter64, cipCardClawDataXferStatsReadBlocksDropped Counter32, cipCardClawDataXferStatsWriteBlocksDropped Counter32, cipCardClawDataXferStatsBufferGetRetryCount Counter32 } cipCardClawDataXferStatsBlocksRead OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successful read data transfer channel command words (CCWs) from the channel perspective." ::= {cipCardClawDataXferStatsEntry 1} cipCardClawDataXferStatsBlocksWritten OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successful write data transfer CCWs from the channel perspective." ::= {cipCardClawDataXferStatsEntry 2} cipCardClawDataXferStatsBytesRead OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes successfully read from the channel perspective." ::= {cipCardClawDataXferStatsEntry 3} cipCardClawDataXferStatsHCBytesRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes successfully read from the channel perspective. This is the 64-bit (High Capacity) version of clawDataXferStatsBytesRead." ::= {cipCardClawDataXferStatsEntry 4} cipCardClawDataXferStatsBytesWritten OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes successfully written from the channel perspective." ::= {cipCardClawDataXferStatsEntry 5} cipCardClawDataXferStatsHCBytesWritten OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes successfully written from the channel perspective. This is the 64-bit version version of clawDataXferStatsBytesWritten." ::= {cipCardClawDataXferStatsEntry 6} cipCardClawDataXferStatsReadBlocksDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of read blocks dropped." ::= {cipCardClawDataXferStatsEntry 7} cipCardClawDataXferStatsWriteBlocksDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of write blocks dropped." ::= {cipCardClawDataXferStatsEntry 8} cipCardClawDataXferStatsBufferGetRetryCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times a buffer was requested and none were available." ::= {cipCardClawDataXferStatsEntry 9} -- ;;;;;;;;;;;;;;;;;;;;;;; End Of CLAW Objects ;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -- ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -- -- TRAP DEFINITIONS -- -- -- Notifications -- cipCardTraps OBJECT IDENTIFIER ::= { cipCard 5} cipCardLinkFailure NOTIFICATION-TYPE OBJECTS { cipCardDtrBrdIndex, cipCardDtrBrdStatus, cipCardDtrBrdSignal, linkIncidentTrapCause, implicitIncidents, codeViolationErrors, linkFailureSignalOrSyncLoss, linkFailureNOSs, linkFailureSequenceTimeouts, linkFailureInvalidSequences } STATUS deprecated DESCRIPTION "This trap indicates that a significant link event has been recognized resulting in the degradation of the interface line quality. (This trap was deactivated 6/97, below trap is now sent on link failures)" ::= { cipCardTraps 1 } cipCardDtrBrdLinkFailure NOTIFICATION-TYPE OBJECTS { cipCardDtrBrdStatus, cipCardDtrBrdSignal, linkIncidentTrapCause } STATUS current DESCRIPTION "This trap indicates that a significant link event has been recognized resulting in the degradation of the interface line quality." ::= { cipCardTraps 2 } -- -- Conformance Information -- ciscoChannelMibConformance OBJECT IDENTIFIER ::= { channel 2 } ciscoChannelMibCompliances OBJECT IDENTIFIER ::= { ciscoChannelMibConformance 1 } ciscoChannelMibGroups OBJECT IDENTIFIER ::= { ciscoChannelMibConformance 2 } -- -- Compliance Statements -- ciscoChannelMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the TcpIP Offload feature." MODULE MANDATORY-GROUPS { ciscoChannelGroup } ::= { ciscoChannelMibCompliances 1 } ciscoChannelMibComplianceRev1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the TcpIP Offload feature." MODULE MANDATORY-GROUPS { ciscoChannelGroupRev1 } ::= { ciscoChannelMibCompliances 2 } ciscoChannelMibComplianceRev2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the TcpIP Offload & CSNA features." MODULE MANDATORY-GROUPS { ciscoChannelGroupRev1, ciscoChannelGroupRev2 } ::= { ciscoChannelMibCompliances 3 } ciscoChannelGroup OBJECT-GROUP OBJECTS { -- cipCardTable -- cipCardEntryIndex, cipCardEntryName, cipCardEntryTotalMemory, cipCardEntryFreeMemory, cipCardEntryCpuUtilization, cipCardEntryTimeSinceLastReset, cipCardEntryMajorSwRevisionNr, cipCardEntryMinorSwRevisionNr, cipCardEntryMajorHwRevisionNr, cipCardEntryMinorHwRevisionNr, -- cipCardApplicationTable -- cipCardApplicationNameIndex, cipCardApplicationRevision, cipCardApplicationCompileInfo, -- cipCardDaughterBoardTable -- cipCardDtrBrdIndex, cipCardDtrBrdType, cipCardDtrBrdStatus, cipCardDtrBrdSignal, cipCardDtrBrdOnline, implicitIncidents, codeViolationErrors, linkFailureSignalOrSyncLoss, linkFailureNOSs, linkFailureSequenceTimeouts, linkFailureInvalidSequences, linkIncidentTrapCause, -- cipCardSubChannelTable cipCardSubChannelIndex, cipCardSubChannelConnections, cipCardSubChannelCancels, cipCardSubChannelSelectiveResets, cipCardSubChannelSystemResets, cipCardSubChannelDeviceErrors, cipCardSubChannelWriteBlocksDropped, cipCardSubChannelLastSenseData, cipCardSubChannelLastSenseDataTime, cipCardSubChannelCuBusies, -- cipCardClawTable cipCardClawIndex, cipCardClawConnected, -- cipCardClawConfigTable cipCardClawConfigPath, cipCardClawConfigDevice, cipCardClawConfigIpAddr, cipCardClawConfigHostName, cipCardClawConfigRouterName, cipCardClawConfigHostAppl, cipCardClawConfigRouterAppl, -- cipCardClawDataXferStatsTable cipCardClawDataXferStatsBlocksRead, cipCardClawDataXferStatsBlocksWritten, cipCardClawDataXferStatsBytesRead, cipCardClawDataXferStatsHCBytesRead, cipCardClawDataXferStatsBytesWritten, cipCardClawDataXferStatsHCBytesWritten, cipCardClawDataXferStatsReadBlocksDropped, cipCardClawDataXferStatsWriteBlocksDropped, cipCardClawDataXferStatsBufferGetRetryCount } STATUS current DESCRIPTION "A collection of objects providing configuration capability." ::= { ciscoChannelMibGroups 1} ciscoChannelGroupRev1 OBJECT-GROUP OBJECTS { -- cipCardTable -- cipCardEntryIndex, cipCardEntryName, cipCardEntryTotalMemory, cipCardEntryFreeMemory, cipCardEntryCpuUtilization, cipCardEntryTimeSinceLastReset, cipCardEntryMajorSwRevisionNr, cipCardEntryMinorSwRevisionNr, cipCardEntryMajorHwRevisionNr, cipCardEntryMinorHwRevisionNr, -- cipCardApplicationTable -- cipCardApplicationNameIndex, cipCardApplicationRevision, cipCardApplicationCompileInfo, -- cipCardDaughterBoardTable -- cipCardDtrBrdIndex, cipCardDtrBrdType, cipCardDtrBrdStatus, cipCardDtrBrdSignal, cipCardDtrBrdOnline, implicitIncidents, codeViolationErrors, linkFailureSignalOrSyncLoss, linkFailureNOSs, linkFailureSequenceTimeouts, linkFailureInvalidSequences, linkIncidentTrapCause, cipCardDtrBrdLastStat, cipCardDtrBrdNextStat, -- cipCardSubChannelTable cipCardSubChannelIndex, cipCardSubChannelConnections, cipCardSubChannelCancels, cipCardSubChannelSelectiveResets, cipCardSubChannelSystemResets, cipCardSubChannelDeviceErrors, cipCardSubChannelWriteBlocksDropped, cipCardSubChannelLastSenseData, cipCardSubChannelLastSenseDataTime, cipCardSubChannelCuBusies, cipCardSubChannelCmdRetries, -- cipCardClawTable cipCardClawIndex, cipCardClawConnected, -- cipCardClawConfigTable cipCardClawConfigPath, cipCardClawConfigDevice, cipCardClawConfigIpAddr, cipCardClawConfigHostName, cipCardClawConfigRouterName, cipCardClawConfigHostAppl, cipCardClawConfigRouterAppl, -- cipCardClawDataXferStatsTable cipCardClawDataXferStatsBlocksRead, cipCardClawDataXferStatsBlocksWritten, cipCardClawDataXferStatsBytesRead, cipCardClawDataXferStatsHCBytesRead, cipCardClawDataXferStatsBytesWritten, cipCardClawDataXferStatsHCBytesWritten, cipCardClawDataXferStatsReadBlocksDropped, cipCardClawDataXferStatsWriteBlocksDropped, cipCardClawDataXferStatsBufferGetRetryCount } STATUS current DESCRIPTION "A collection of objects providing configuration capability." ::= { ciscoChannelMibGroups 2} ciscoChannelGroupRev2 OBJECT-GROUP OBJECTS { -- cipCardTable -- cipCardEntryIndex cipCardEntryCpuLoad1m, cipCardEntryCpuLoad5m, cipCardEntryCpuLoad60m, cipCardEntryDmaLoad1m, cipCardEntryDmaLoad5m, cipCardEntryDmaLoad60m, -- cipCardDaughterBoardTable -- cipCardDtrBrdIndex cipCardDtrBrdChannelLoad1m, cipCardDtrBrdChannelLoad5m, cipCardDtrBrdChannelLoad60m, -- cipCardClawConfigTable cipCardClawConfigBroadcastEnable, cipCardClawConfigRowStatus } STATUS current DESCRIPTION "A collection of objects providing configuration capability." ::= { ciscoChannelMibGroups 3} ciscoChannelGroupRev3 OBJECT-GROUP OBJECTS { -- cipCardSubChannelTable cipCardSubChannelResetEvent, cipCardSubChannelShortBusy, cipCardSubChannelCMDRetry, cipCardSubChannelBufferWait, cipCardSubChannelStatPending, cipCardSubChannelSuspend, cipCardSubChannelFBLWait } STATUS current DESCRIPTION "A collection of Subchannel device status objects." ::= { ciscoChannelMibGroups 4} END