CISCO-CIPCMPC-MIB device MIB details by Cisco
CISCO-CIPCMPC-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-CIPCMPC-MIB.
| Vendor: | Cisco |
|---|---|
| Mib: | CISCO-CIPCMPC-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- CISCO-CIPCMPC-MIB - This MIB manages the CISCO MultiPath Channel -- feature on CMCC cards. -- -- February 1997, Mike Otto -- -- Copyright (c) 1997-1998, 1999 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-CIPCMPC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF RowStatus, TDomain, TimeStamp FROM SNMPv2-TC ifIndex FROM RFC1213-MIB ciscoMgmt FROM CISCO-SMI cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex FROM CISCO-CHANNEL-MIB ChannelPath, ChannelDevice FROM CISCO-CIPCSNA-MIB ChannelTgName FROM CISCO-CIPTG-MIB; ciscoCipCmpcMIB MODULE-IDENTITY LAST-UPDATED "9901250000Z" ORGANIZATION "cisco IBU Engineering Working Group" CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "This is the Management Information Base (MIB) module for objects used to manage the Cisco Multi-Path Channel (MPC) support on Cisco Mainframe Channel Connection (CMCC) cards, also called the CMPC feature. ------------------------------------------------- | Acronym Definitions: | | CIP = Channel Interface Processor | | CMPC = Cisco Multi-Path Channel | | HPR = High Performance Routing | | HPDT = High Performance Data Transfer | | ISR = Intermediate Session Routing | | MPC = Multi-Path Channel | | MPC+ = HPDT MPC | | SNA = Systems Network Architecture | | TG = Transmission Group | ------------------------------------------------- This MIB consists of the following tables: 1) CMPC Subchannel Administration 2) CMPC Subchannel Operational 3) CMPC TG Statistics Refer to the following MIBs for an understanding of Cisco channel terminology and Cisco CMCC terminology: CISCO-CHANNEL-MIB CISCO-CIPCSNA-MIB CISCO-CIPLAN-MIB CISCO-CIPTG-MIB " REVISION "9901250000Z" DESCRIPTION "Since the CMCC now supports MPC and MPC+, the new state, activePlus, was added to cipCmpcSubChannelOperState to indicate the TG is active and using the MPC+ protocol." REVISION "9801060000Z" DESCRIPTION "With the addition of Cisco's new Channel Port Adapter cards, all the references to CIP in the MIB description and object descriptions are changed to CMCC (Cisco Mainframe Channel Connection). The object names in the form of cip... or cipCard... will remain the same, but will be valid objects for the Channel Port Adapter cards." REVISION "9702090000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 72 } cipCmpcObjects OBJECT IDENTIFIER ::= { ciscoCipCmpcMIB 1 } cipCmpcSubChannel OBJECT IDENTIFIER ::= { cipCmpcObjects 1 } cipCmpcTg OBJECT IDENTIFIER ::= { cipCmpcObjects 2 } -- ;;;;;;;;;;;;;;;;;;;;; cipCmpcSubChannelAdminTable ;;;;;;;;;;;;;;;;;;;;;;;;;;; cipCmpcSubChannelAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCmpcSubChannelAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration information used to define subchannels for the Cisco Multi-Path Channel (CMPC) feature on the CMCC card. Each instance of this table is created when a CMPC sub-channel is configured on the router. When the CMPC sub-channel configuration statement is deleted from the router, the instance represented by this table is removed." ::= { cipCmpcSubChannel 1 } cipCmpcSubChannelAdminEntry OBJECT-TYPE SYNTAX CipCmpcSubChannelAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of CMPC configuration values." INDEX { cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex } ::= { cipCmpcSubChannelAdminTable 1 } CipCmpcSubChannelAdminEntry ::= SEQUENCE { cipCmpcSubChannelAdminPath ChannelPath, cipCmpcSubChannelAdminDevice ChannelDevice, cipCmpcSubChannelAdminTgName ChannelTgName, cipCmpcSubChannelAdminDirection INTEGER, cipCmpcSubChannelAdminTgTransport TDomain, cipCmpcSubChannelAdminRowStatus RowStatus } cipCmpcSubChannelAdminPath OBJECT-TYPE SYNTAX ChannelPath MAX-ACCESS read-create STATUS current DESCRIPTION "Channel path for this CMPC instance." ::= { cipCmpcSubChannelAdminEntry 1 } cipCmpcSubChannelAdminDevice OBJECT-TYPE SYNTAX ChannelDevice MAX-ACCESS read-create STATUS current DESCRIPTION "Device address of the subchannel the attached host will use to communicate with this CMPC instance." ::= { cipCmpcSubChannelAdminEntry 2 } cipCmpcSubChannelAdminTgName OBJECT-TYPE SYNTAX ChannelTgName MAX-ACCESS read-create STATUS current DESCRIPTION "This is the name of the CMPC transmission group. Each CMPC subchannel in the same connection transmission group must have the same TG name" ::= { cipCmpcSubChannelAdminEntry 3 } cipCmpcSubChannelAdminDirection OBJECT-TYPE SYNTAX INTEGER { read (1), write (2), readOrWrite (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether the CMPC subchannel is for host reads or host writes." ::= { cipCmpcSubChannelAdminEntry 4 } cipCmpcSubChannelAdminTgTransport OBJECT-TYPE SYNTAX TDomain MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Transmission Group transport type OID for which this CMPC Sub-Channel instance if configured. When the Transmission Group for this CMPC Sub-Channel instance is not configured, this object will be set to the NULL TDomian { 0, 0 }." ::= { cipCmpcSubChannelAdminEntry 5 } cipCmpcSubChannelAdminRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used by a Management Station to create or delete the row entry in the cipCmpcSubChannelAdminTable following the the RowStatus textual convention. Upon successful creation of the row, an Agent automatically creates a corresponding entry in the cipCmpcSubChannelOperTable and cipCmpcSubChannelStatsTable. The Management Station can initiate row deletion, by setting this value to 'destroy (6)'. The Agent will then delete the rows corresponding to this CMPC instance from the cipCmpcSubChannelAdminTable, cipCmpcSubChannelOperTable and cipCmpcSubChannelStatsTable." ::= { cipCmpcSubChannelAdminEntry 6 } -- ;;;;;;;;;;;;;;;;;;;;; cipCmpcSubChannelOperTable ;;;;;;;;;;;;;;;;;;;;;;;;;;; cipCmpcSubChannelOperTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCmpcSubChannelOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains operational information for the Cisco Multi-Path Channel (CMPC) feature on the CMCC card." ::= { cipCmpcSubChannel 2 } cipCmpcSubChannelOperEntry OBJECT-TYPE SYNTAX CipCmpcSubChannelOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of CMPC operational and status values. The entries are created by the Agent. They have read-only access." AUGMENTS { cipCmpcSubChannelAdminEntry } ::= { cipCmpcSubChannelOperTable 1 } CipCmpcSubChannelOperEntry ::= SEQUENCE { cipCmpcSubChannelOperState INTEGER, cipCmpcSubChannelOperMaxbfru Integer32 } cipCmpcSubChannelOperState OBJECT-TYPE SYNTAX INTEGER { shutdown (1), inactive (2), xid2Pending (3), active (4), activePlus (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Activation state of the CMPC subchannel. shutdown - CMCC interface with this CMPC subchannel configured is shutdown. inactive - CMCC physical channel up, CMPC subchannel has not started to activate yet. xid2Pending - VTAM and CMCC CMPC have started negotiating channel connection. active - CMCC CMPC subchannel is active in MPC or non-HPDT mode. activePlus - CMCC CMPC subchannel is active in MPC+ or HPDT mode." ::= { cipCmpcSubChannelOperEntry 1 } cipCmpcSubChannelOperMaxbfru OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of 4096 byte buffers allowed per channel block I/O on this CMPC subchannel. For host write subchannels, this is the maximum number of 4096 byte buffers the host can write to the CMCC for each channel block I/O. Since the CMCC is capable of receiving 16 4096 byte buffers per channel block I/O, the value on host write subchannels will always be 16. For host read subchannels, this is the maximum number of 4096 byte buffers the host can read from the CMCC for each channel block I/O." ::= { cipCmpcSubChannelOperEntry 2 } -- ;;;;;;;;;;;;;;;;;; cipCmpcTgOperTable ;;;;;;;;;;;;;;;;;;;;;;;; cipCmpcTgOperTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCmpcTgOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Operational information for each instance of a CMPC Transmission Group (TG). Each instance of this table is created for every CMPC TG with a unique tg-name configured on a CMCC card." ::= { cipCmpcTg 1 } cipCmpcTgOperEntry OBJECT-TYPE SYNTAX CipCmpcTgOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of CMPC TG Operational objects." INDEX { ifIndex, cipCmpcTgOperName } ::= { cipCmpcTgOperTable 1 } CipCmpcTgOperEntry ::= SEQUENCE { cipCmpcTgOperName ChannelTgName, cipCmpcTgOperLastSeqNumFailureCause INTEGER, cipCmpcTgOperLastSeqNumFailureTime TimeStamp, cipCmpcTgOperExpectedReceiveSeqNum Integer32, cipCmpcTgOperLastSeqNumReceived Integer32, cipCmpcTgOperLastSeqNumSent Integer32 } cipCmpcTgOperName OBJECT-TYPE SYNTAX ChannelTgName MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the name for this instance of a CMPC transmission group (TG)." ::= { cipCmpcTgOperEntry 1 } cipCmpcTgOperLastSeqNumFailureCause OBJECT-TYPE SYNTAX INTEGER { none (1), blockSeqError (2), sweepSeqError (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The last CMPC TG sequence number failure cause. none - No sequence number errors have been detected. blockSeqError - Sequence number received in a cmpc I/O block did not match the expected sequence number. sweepSeqError - Sequence number received in a sweep message does not compare to the expected sequence number. for this CMPC TG." ::= { cipCmpcTgOperEntry 2 } cipCmpcTgOperLastSeqNumFailureTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the value of sysUpTime when this CMPC TG last detected a sequence number error. If the CMPC TG has not failed, then this value shall be zero." ::= { cipCmpcTgOperEntry 3 } cipCmpcTgOperExpectedReceiveSeqNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the sequence number expected from the host by this CMPC TG." ::= { cipCmpcTgOperEntry 4 } cipCmpcTgOperLastSeqNumReceived OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the last sequence number received from the host by this CMPC TG." ::= { cipCmpcTgOperEntry 5 } cipCmpcTgOperLastSeqNumSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the last sequence number sent to the host by this CMPC TG." ::= { cipCmpcTgOperEntry 6 } -- ;;;;;;;;;;;;;;;;;; cipCmpcTgStatsTable ;;;;;;;;;;;;;;;;;;;;;;;; cipCmpcTgStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCmpcTgStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistical information for each instance of a CMPC Transmission Group (TG). Each instance of this table is created for every CMPC TG with a unique tg-name configured on a CMCC card." ::= { cipCmpcTg 2 } cipCmpcTgStatsEntry OBJECT-TYPE SYNTAX CipCmpcTgStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of CMPC TG statistical objects." AUGMENTS { cipCmpcTgOperEntry } ::= { cipCmpcTgStatsTable 1 } CipCmpcTgStatsEntry ::= SEQUENCE { cipCmpcTgStatsConnectReqs Counter32, cipCmpcTgStatsConnectInds Counter32, cipCmpcTgStatsConnectRsps Counter32, cipCmpcTgStatsConnectCnfms Counter32, cipCmpcTgStatsDiscReqs Counter32, cipCmpcTgStatsDiscInds Counter32, cipCmpcTgStatsSweepReqsIn Counter32, cipCmpcTgStatsSweepReqsOut Counter32, cipCmpcTgStatsSweepRspsIn Counter32, cipCmpcTgStatsSweepRspsOut Counter32, cipCmpcTgStatsWraps Counter32 } cipCmpcTgStatsConnectReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of connect requests received from the host by this CMPC TG." ::= { cipCmpcTgStatsEntry 1 } cipCmpcTgStatsConnectInds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of connect indications sent to the host by this CMPC TG." ::= { cipCmpcTgStatsEntry 2 } cipCmpcTgStatsConnectRsps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of connect responses received from the host by this CMPC TG." ::= { cipCmpcTgStatsEntry 3 } cipCmpcTgStatsConnectCnfms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of connect confirms sent to the host by this CMPC TG." ::= { cipCmpcTgStatsEntry 4 } cipCmpcTgStatsDiscReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of disconnect requests received from the host by this CMPC TG." ::= { cipCmpcTgStatsEntry 5 } cipCmpcTgStatsDiscInds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of disconnect Indications sent to the host by this CMPC TG." ::= { cipCmpcTgStatsEntry 6 } cipCmpcTgStatsSweepReqsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sweep requests received from from the host by this CMPC TG." ::= { cipCmpcTgStatsEntry 7 } cipCmpcTgStatsSweepReqsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CMPC sweep requests sent by this CMPC TG." ::= { cipCmpcTgStatsEntry 8 } cipCmpcTgStatsSweepRspsIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CMPC sweep responses received from VTAM by this CMPC TG." ::= { cipCmpcTgStatsEntry 9 } cipCmpcTgStatsSweepRspsOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CMPC sweep responses sent by this CMPC TG." ::= { cipCmpcTgStatsEntry 10 } cipCmpcTgStatsWraps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the CMPC sequence number for this TG has wrapped." ::= { cipCmpcTgStatsEntry 11 } -- -- ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -- -- Notifications -- cipCmpcNotificationPrefix OBJECT IDENTIFIER ::= { ciscoCipCmpcMIB 2 } cipCmpcNotifications OBJECT IDENTIFIER ::= { cipCmpcNotificationPrefix 0 } cipCmpcDirectionMismatch NOTIFICATION-TYPE OBJECTS { cipCmpcSubChannelAdminDirection } STATUS current DESCRIPTION "This trap indicates that the configured direction for the specified CMPC subchannel does not match the direction specified by the host. The CMPC subchannel will not activate as long as this mismatch exists." ::= { cipCmpcNotifications 1 } cipCmpcSeqNumError NOTIFICATION-TYPE OBJECTS { cipCmpcTgOperLastSeqNumFailureCause, cipCmpcTgOperExpectedReceiveSeqNum, cipCmpcTgOperLastSeqNumReceived } STATUS current DESCRIPTION "This trap indicates that the CMPC TG has detected an MPC sequence number error. This error will cause the CMPC TG to disconnect." ::= { cipCmpcNotifications 2 } -- -- ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -- -- Conformance Information -- ciscoCipCmpcMibConformance OBJECT IDENTIFIER ::= { ciscoCipCmpcMIB 3 } ciscoCipCmpcMibCompliances OBJECT IDENTIFIER ::= { ciscoCipCmpcMibConformance 1 } ciscoCipCmpcMibGroups OBJECT IDENTIFIER ::= { ciscoCipCmpcMibConformance 2 } -- -- Compliance Statements -- ciscoCipCmpcMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the Cisco Multi-Path Channel (CMPC) feature." MODULE MANDATORY-GROUPS { ciscoCipCmpcSubChannelGroup, ciscoCipCmpcTgGroup } ::= { ciscoCipCmpcMibCompliances 1 } ciscoCipCmpcSubChannelGroup OBJECT-GROUP OBJECTS { -- Table Header -- cipCmpcSubChannelAdminTable -- cipCmpcSubChannelAdminEntry -- Table Header -- cipCmpcSubChannelOperTable -- cipCmpcSubChannelOperEntry -- Table Indicies -- cipCardEntryIndex -- cipCardDtrBrdIndex -- cipCardSubChannelIndex cipCmpcSubChannelAdminPath, cipCmpcSubChannelAdminDevice, cipCmpcSubChannelAdminTgName, cipCmpcSubChannelAdminDirection, cipCmpcSubChannelAdminTgTransport, cipCmpcSubChannelAdminRowStatus, cipCmpcSubChannelOperState, cipCmpcSubChannelOperMaxbfru } STATUS current DESCRIPTION "A collection of objects providing Cisco Multi-Path Channel (CMPC) Administration, Operational status and Statistics." ::= { ciscoCipCmpcMibGroups 1 } ciscoCipCmpcTgGroup OBJECT-GROUP OBJECTS { -- Table Header -- cipCmpcTgOperTable -- cipCmpcTgOperEntry -- Table Header -- cipCmpcTgStatsTable -- cipCmpcTgStatsEntry -- Table Indicies -- ifIndex -- cipCmpcTgOperName cipCmpcTgOperLastSeqNumFailureCause, cipCmpcTgOperLastSeqNumFailureTime, cipCmpcTgOperExpectedReceiveSeqNum, cipCmpcTgOperLastSeqNumReceived, cipCmpcTgOperLastSeqNumSent, cipCmpcTgStatsConnectReqs, cipCmpcTgStatsConnectInds, cipCmpcTgStatsConnectRsps, cipCmpcTgStatsConnectCnfms, cipCmpcTgStatsDiscReqs, cipCmpcTgStatsDiscInds, cipCmpcTgStatsSweepReqsIn, cipCmpcTgStatsSweepReqsOut, cipCmpcTgStatsSweepRspsIn, cipCmpcTgStatsSweepRspsOut, cipCmpcTgStatsWraps } STATUS current DESCRIPTION "A collection of objects providing CMPC TG Operational and Statistical information." ::= { ciscoCipCmpcMibGroups 2 } END