CISCO-CIPTCPIP-MIB device MIB details by Cisco

CISCO-CIPTCPIP-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-CIPTCPIP-MIB.

Vendor:	Cisco
Mib:	CISCO-CIPTCPIP-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-CIPTCPIP-MIB - CIP TCP/IP MIB.
--
-- April 1995, Mike Otto
--
-- Copyright (c) 1995-1996, 1998 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--

CISCO-CIPTCPIP-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, 
	Counter32,
	Counter64,
	Integer32,
	Gauge32,
	IpAddress
		FROM SNMPv2-SMI

	MODULE-COMPLIANCE, OBJECT-GROUP
		FROM SNMPv2-CONF

	ifIndex 
		FROM IF-MIB

	ciscoMgmt
		FROM CISCO-SMI;

ciscoCipTcpIpMIB MODULE-IDENTITY
	LAST-UPDATED	"9508210000Z"
	ORGANIZATION	"cisco IBM engineering Working Group"
	CONTACT-INFO
		"       Cisco Systems
			Customer Service

		Postal: 170 W Tasman Drive
			San Jose, CA  95134
			USA

		   Tel: +1 800 553-NETS

		E-mail: cs-snmp@cisco.com"
    DESCRIPTION
      "This is the MIB module for objects used to manage
       the cisco TCP/IP stack running on the Cisco Mainframe
       Channel Connection (CMCC) board.
       
       The First application to use this stack is the IBM
       TCP-Offload feature. The main idea with this application 
       is to replace the TCP/IP stack on the IBM host with a 
       protocol requiring lower host CPU utilization, and have 
       the TCP/IP processing done on the router.
       
       There are multiple sets of MIB-II statistics stored by the 
       TCP/IP implementation. Each instance of the MIB-II objects
       corresponds to an instantiation of the TCP/IP stack which is 
       based on the IP address of the stack.
       
       The IP routing table is not supported here."

	REVISION        "9801060000Z"
	DESCRIPTION
		"With the addition of Cisco's new Channel Port
                 Adapter cards, all the references to CIP in the
                 MIB description and object descriptions are changed
                 to CMCC (Cisco Mainframe Channel Connection). The
                 object names in the form of cip... or cipCard...
                 will remain the same, but will be valid objects
                 for the Channel Port Adapter cards."

	REVISION        "9508210000Z"
	DESCRIPTION
		"Minor cleanup to pacify mib compiler."
	REVISION      "9504280000Z"
	DESCRIPTION
		"Initial version of this MIB module."
::= { ciscoMgmt 32}

cipTcpIpObjects   OBJECT IDENTIFIER ::= { ciscoCipTcpIpMIB 1 }
cipIpObjects      OBJECT IDENTIFIER ::= { cipTcpIpObjects 1 }
cipTcpObjects     OBJECT IDENTIFIER ::= { cipTcpIpObjects 2 }
cipIcmpObjects    OBJECT IDENTIFIER ::= { cipTcpIpObjects 3 }
cipUdpObjects     OBJECT IDENTIFIER ::= { cipTcpIpObjects 4 }


cipIpTable OBJECT-TYPE
  SYNTAX SEQUENCE OF CipIpEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
   "This table contains a list of parameters and statistics
    pertaining to each IP stack. Rows are dynamically added 
    to this table via CMCC TCP application MIBS 
    (ie. CISCO-TCPOFFLOAD-MIB)."
  ::= { cipIpObjects 1 }

cipIpEntry OBJECT-TYPE
  SYNTAX      CipIpEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
    "A list of IP stack values."
  INDEX   { 
    ifIndex,
    cipIpAddress
  }
::= { cipIpTable 1 }

CipIpEntry ::= SEQUENCE
{
  cipIpAddress         IpAddress,
  cipIpForwarding      INTEGER,
  cipIpDefaultTTL      INTEGER,
  cipIpInReceives      Counter32,
  cipIpInHdrErrors     Counter32,
  cipIpInAddrErrors    Counter32,
  cipIpForwDatagrams   Counter32,
  cipIpInUnknownProtos Counter32,
  cipIpInDiscards      Counter32,
  cipIpInDelivers      Counter32,
  cipIpOutRequests     Counter32,
  cipIpOutDiscards     Counter32,
  cipIpOutNoRoutes     Counter32,
  cipIpReasmTimeout    Integer32,
  cipIpReasmReqds      Counter32,
  cipIpReasmOKs        Counter32,
  cipIpReasmFails      Counter32,
  cipIpFragOKs         Counter32,
  cipIpFragFails       Counter32,
  cipIpFragCreates     Counter32,
  cipIpRoutingDiscards Counter32
}

cipIpAddress OBJECT-TYPE 
  SYNTAX      IpAddress
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
    "The IP address for this IP stack."
  ::= { cipIpEntry 1 }

cipIpForwarding OBJECT-TYPE
  SYNTAX  INTEGER {
    forwarding(1),    -- acting as a gateway
    notForwarding(2) -- NOT acting as a gateway
  }
  MAX-ACCESS  read-write
  STATUS  current
  DESCRIPTION
    "The indication of whether this entity is acting
    as an IP gateway in respect to the forwarding of
    datagrams received by, but not addressed to, this
    entity.  IP gateways forward datagrams.  IP hosts
    do not (except those source-routed via the host).

    Note that for some managed nodes, this object may
    take on only a subset of the values possible.
    Accordingly, it is appropriate for an agent to
    return a `badValue' response if a management
    station attempts to change this object to an
    inappropriate value."
  ::= { cipIpEntry 2 }

cipIpDefaultTTL OBJECT-TYPE
  SYNTAX  INTEGER (1..255)
  MAX-ACCESS  read-write
  STATUS  current
  DESCRIPTION
    "The default value inserted into the Time-To-Live
    field of the IP header of datagrams originated at
    this entity, whenever a TTL value is not supplied
    by the transport layer protocol."
  DEFVAL { 64 }
  ::= { cipIpEntry 3 }

cipIpInReceives OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The total number of input datagrams received from
    interfaces, including those received in error,
    for this IP Address instance."
  ::= { cipIpEntry 4 }

cipIpInHdrErrors OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of input datagrams discarded due to
    errors in their IP headers, including bad
    checksums, version number mismatch, other format
    errors, time-to-live exceeded, errors discovered
    in processing their IP options, etc."
  ::= { cipIpEntry 5 }

cipIpInAddrErrors OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of input datagrams discarded because
    the IP address in their IP header's destination
    field was not a valid address to be received at
    this entity.  This count includes invalid
    addresses (e.g., 0.0.0.0) and addresses of
    unsupported Classes (e.g., Class E).  For entities
    which are not IP Gateways and therefore do not
    forward datagrams, this counter includes datagrams
    discarded because the destination address was not
    a local address."
  ::= { cipIpEntry 6 }

cipIpForwDatagrams OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of input datagrams for which this
    entity was not their final IP destination, as a
    result of which an attempt was made to find a
    route to forward them to that final destination.
    In entities which do not act as IP Gateways, this
    counter will include only those packets which were
    Source-Routed via this entity, and the Source-
    Route option processing was successful."
  ::= { cipIpEntry 7 }

cipIpInUnknownProtos OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of locally-addressed datagrams
    received successfully but discarded because of an
    unknown or unsupported protocol."
  ::= { cipIpEntry 8 }

cipIpInDiscards OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of input IP datagrams for which no
    problems were encountered to prevent their
    continued processing, but which were discarded
    (e.g., for lack of buffer space).  Note that this
    counter does not include any datagrams discarded
    while awaiting re-assembly."
  ::= { cipIpEntry 9 }

cipIpInDelivers OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The total number of input datagrams successfully
    delivered to IP user-protocols (including ICMP)."
  ::= { cipIpEntry 10 }

cipIpOutRequests OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The total number of IP datagrams which local IP
    user-protocols (including ICMP) supplied to IP in
    requests for transmission.  Note that this counter
    does not include any datagrams counted in
    ipForwDatagrams."
  ::= { cipIpEntry 11 }

cipIpOutDiscards OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of output IP datagrams for which no
    problem was encountered to prevent their
    transmission to their destination, but which were
    discarded (e.g., for lack of buffer space).  Note
    that this counter would include datagrams counted
    in ipForwDatagrams if any such packets met this
    (discretionary) discard criterion."
  ::= { cipIpEntry 12 }

cipIpOutNoRoutes OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of IP datagrams discarded because no
    route could be found to transmit them to their
    destination.  Note that this counter includes any
    packets counted in ipForwDatagrams which meet this
    `no-route' criterion.  Note that this includes any
    datagrams which a host cannot route because all of
    its default gateways are down."
  ::= { cipIpEntry 13 }

cipIpReasmTimeout OBJECT-TYPE
  SYNTAX  Integer32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The maximum number of seconds which received
    fragments are held while they are awaiting
    reassembly at this entity."
  ::= { cipIpEntry 14 }

cipIpReasmReqds OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of IP fragments received which needed
    to be reassembled at this entity."
  ::= { cipIpEntry 15 }

cipIpReasmOKs OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of IP datagrams successfully re-
    assembled."
  ::= { cipIpEntry 16 }

cipIpReasmFails OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of failures detected by the IP re-
    assembly algorithm (for whatever reason: timed
    out, errors, etc).  Note that this is not
    necessarily a count of discarded IP fragments
    since some algorithms (notably the algorithm in
    RFC 815) can lose track of the number of fragments
    by combining them as they are received."
  ::= { cipIpEntry 17 }

cipIpFragOKs OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of IP datagrams that have been
    successfully fragmented at this entity."
  ::= { cipIpEntry 18 }

cipIpFragFails OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of IP datagrams that have been
    discarded because they needed to be fragmented at
    this entity but could not be, e.g., because their
    Don't Fragment flag was set."
  ::= { cipIpEntry 19 }

cipIpFragCreates OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of IP datagram fragments that have
    been generated as a result of fragmentation at
    this entity."
  ::= { cipIpEntry 20 }

cipIpRoutingDiscards OBJECT-TYPE
  SYNTAX  Counter32
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The number of routing entries which were chosen
    to be discarded even though they are valid.  One
    possible reason for discarding such an entry could
    be to free-up buffer space for other routing
    entries."
  ::= { cipIpEntry 21 }

cipTcpStackTable OBJECT-TYPE
  SYNTAX SEQUENCE OF CipTcpStackEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
   "This table contains a list of parameters pertaining to each
    TCP stack.  Rows are dynamically added to this table via 
    CMCC TCP application MIBS (ie. CISCO-TCPOFFLOAD-MIB)."
  ::= { cipTcpObjects 1 }

cipTcpStackEntry OBJECT-TYPE
  SYNTAX      CipTcpStackEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
    "A list of TCP stack values."
  INDEX   {
    ifIndex,
    cipIpAddress
  }
  ::= { cipTcpStackTable 1 }

CipTcpStackEntry ::= SEQUENCE
{
  cipTcpRtoAlgorithm INTEGER,
  cipTcpRtoMin       Integer32,
  cipTcpRtoMax       Integer32,
  cipTcpMaxConn      Integer32,
  cipTcpActiveOpens  Counter32,
  cipTcpPassiveOpens Counter32,
  cipTcpAttemptFails Counter32,
  cipTcpEstabResets  Counter32,
  cipTcpCurrEstab    Gauge32,
  cipTcpInSegs       Counter32,
  cipTcpOutSegs      Counter32,
  cipTcpRetransSegs  Counter32,
  cipTcpInErrs       Counter32,
  cipTcpOutRsts      Counter32
}

cipTcpRtoAlgorithm OBJECT-TYPE
  SYNTAX  INTEGER {
              other(1),    -- none of the following
              constant(2), -- a constant rto
              rsre(3),     -- MIL-STD-1778, Appendix B
              vanj(4)      -- Van Jacobson's algorithm [10]
          }
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
    "The algorithm used to determine the timeout value
     used for retransmitting unacknowledged octets."
  ::= { cipTcpStackEntry 1 }

cipTcpRtoMin OBJECT-TYPE
  SYNTAX      Integer32
  UNITS       "milliseconds"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The minimum value permitted by a TCP
    implementation for the retransmission timeout,
    measured in milliseconds.  More refined semantics
    for objects of this type depend upon the algorithm
    used to determine the retransmission timeout.  In
    particular, when the timeout algorithm is rsre(3),
    an object of this type has the semantics of the
    LBOUND quantity described in RFC 793."
  ::= { cipTcpStackEntry 2 }

cipTcpRtoMax OBJECT-TYPE
  SYNTAX      Integer32
  UNITS       "milliseconds"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The maximum value permitted by a TCP
    implementation for the retransmission timeout,
    measured in milliseconds.  More refined semantics
    for objects of this type depend upon the algorithm
    used to determine the retransmission timeout.  In
    particular, when the timeout algorithm is rsre(3),
    an object of this type has the semantics of the
    UBOUND quantity described in RFC 793."
  ::= { cipTcpStackEntry 3 }

cipTcpMaxConn OBJECT-TYPE
  SYNTAX      Integer32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The limit on the total number of TCP connections
    the entity can support.  In entities where the
    maximum number of connections is dynamic, this
    object should contain the value -1."
  ::= { cipTcpStackEntry 4 }

cipTcpActiveOpens OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of times TCP connections have made a
    direct transition to the SYN-SENT state from the
    CLOSED state."
  ::= { cipTcpStackEntry 5 }

cipTcpPassiveOpens OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of times TCP connections have made a
    direct transition to the SYN-RCVD state from the
    LISTEN state."
  ::= { cipTcpStackEntry 6 }

cipTcpAttemptFails OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of times TCP connections have made a
    direct transition to the CLOSED state from either
    the SYN-SENT state or the SYN-RCVD state, plus the
    number of times TCP connections have made a direct
    transition to the LISTEN state from the SYN-RCVD
    state."
  ::= { cipTcpStackEntry 7 }

cipTcpEstabResets OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of times TCP connections have made a
    direct transition to the CLOSED state from either
    the ESTABLISHED state or the CLOSE-WAIT state."
  ::= { cipTcpStackEntry 8 }

cipTcpCurrEstab OBJECT-TYPE
  SYNTAX      Gauge32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of TCP connections for which the
    current state is either ESTABLISHED or CLOSE-
    WAIT."
  ::= { cipTcpStackEntry 9 }

cipTcpInSegs OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The total number of segments received, including
    those received in error.  This count includes
    segments received on currently established
    connections."
  ::= { cipTcpStackEntry 10 }

cipTcpOutSegs OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The total number of segments sent, including
    those on current connections but excluding those
    containing only retransmitted octets."
  ::= { cipTcpStackEntry 11 }

cipTcpRetransSegs OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The total number of segments retransmitted - that
    is, the number of TCP segments transmitted
    containing one or more previously transmitted
    octets."
  ::= { cipTcpStackEntry 12 }

cipTcpInErrs OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The total number of segments received in error
    (e.g., bad TCP checksums)."
  ::= { cipTcpStackEntry 13 }

cipTcpOutRsts OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of TCP segments sent containing the
    RST flag."
  ::= { cipTcpStackEntry 14 }

cipTcpConnTable OBJECT-TYPE
  SYNTAX SEQUENCE OF CipTcpConnEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
   "This table contains a list of parameters pertaining to the 
    connections for a particular TCP Offload stack."
  ::= { cipTcpObjects 2 }

cipTcpConnEntry OBJECT-TYPE
  SYNTAX      CipTcpConnEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
    "A list of TCP connection values."
  INDEX   {
    ifIndex,
    cipIpAddress,
    cipTcpConnLocalPort,
    cipTcpConnRemAddress,
    cipTcpConnRemPort
  }
  ::= { cipTcpConnTable 1 }

CipTcpConnEntry ::= SEQUENCE
{
  cipTcpConnLocalPort     INTEGER,
  cipTcpConnRemAddress    IpAddress,
  cipTcpConnRemPort       INTEGER,
  cipTcpConnState         INTEGER,
  cipTcpConnInHCBytes     Counter64,
  cipTcpConnInBytes       Counter32,
  cipTcpConnOutHCBytes    Counter64,
  cipTcpConnOutBytes      Counter32
}

cipTcpConnLocalPort OBJECT-TYPE
  SYNTAX      INTEGER (0..65535)
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
    "The local port number for this TCP connection."
  ::= { cipTcpConnEntry 1 }

cipTcpConnRemAddress OBJECT-TYPE
  SYNTAX      IpAddress
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
    "The remote IP address for this TCP connection."
  ::= { cipTcpConnEntry 2 }

cipTcpConnRemPort OBJECT-TYPE
  SYNTAX      INTEGER (0..65535)
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
    "The remote port number for this TCP connection."
  ::= { cipTcpConnEntry 3 }

cipTcpConnState OBJECT-TYPE
  SYNTAX  INTEGER {
              closed(1),
              listen(2),
              synSent(3),
              synReceived(4),
              established(5),
              finWait1(6),
              finWait2(7),
              closeWait(8),
              lastAck(9),
              closing(10),
              timeWait(11),
              deleteTCB(12)
          }
  MAX-ACCESS  read-write
  STATUS  current
  DESCRIPTION
    "The state of this TCP connection.

     The only value which may be set by a management
     station is deleteTCB(12).  Accordingly, it is
     appropriate for an agent to return a `badValue'
     response if a management station attempts to set
     this object to any other value.

     If a management station sets this object to the
     value deleteTCB(12), then this has the effect of
     deleting the TCB (as defined in RFC 793) of the
     corresponding connection on the managed node,
     resulting in immediate termination of the
     connection.

     As an implementation-specific option, a RST
     segment may be sent from the managed node to the
     other TCP endpoint (note however that RST segments
     are not sent reliably)."
  ::= { cipTcpConnEntry 4 }

cipTcpConnInHCBytes OBJECT-TYPE
  SYNTAX      Counter64
  UNITS       "octets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of bytes sent for this TCP 
     connection.
  
     NOTE:  This is a 64 bit (High Capacity)
            version of the cipCardCsnaStatsBytesTxd
            counter for use with SNMP Version 2 
            Managers"
  ::= { cipTcpConnEntry 5 }

cipTcpConnInBytes OBJECT-TYPE
  SYNTAX      Counter32
  UNITS       "octets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of bytes sent for this TCP 
     connection.
  
     NOTE:  To support SNMP Version 1 
            Managers, this variable is
            supplied as a 32 bit value
            which can wrap very 
            frequently."
  ::= { cipTcpConnEntry 6 }

cipTcpConnOutHCBytes OBJECT-TYPE
  SYNTAX      Counter64
  UNITS       "octets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of bytes received for this TCP 
     connection.
  
     NOTE:  This is a 64 bit (High Capacity)
            version of the cipCardCsnaStatsBytesTxd
            counter for use with SNMP Version 2 
            Managers"
  ::= { cipTcpConnEntry 7 }

cipTcpConnOutBytes OBJECT-TYPE
  SYNTAX      Counter32
  UNITS       "octets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of bytes received for this TCP 
     connection.
  
     NOTE:  To support SNMP Version 1 
            Managers, this variable is
            supplied as a 32 bit value
            which can wrap very 
            frequently."
  ::= { cipTcpConnEntry 8 }

cipIcmpTable OBJECT-TYPE
  SYNTAX SEQUENCE OF CipIcmpEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
   "This table contains a list of parameters pertaining to 
    each ICMP stack. Rows are dynamically added to this 
    table via CMCC TCP application MIBS 
    (ie. CISCO-TCPOFFLOAD-MIB)."
  ::= { cipIcmpObjects 1 }

cipIcmpEntry OBJECT-TYPE
  SYNTAX      CipIcmpEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
    "A list of ICMP values."
  INDEX   { 
    ifIndex,
    cipIpAddress
  }
  ::= { cipIcmpTable 1 }

CipIcmpEntry ::= SEQUENCE
{
  cipIcmpInMsgs           Counter32,
  cipIcmpInErrors         Counter32,
  cipIcmpInDestUnreachs   Counter32,
  cipIcmpInTimeExcds      Counter32,
  cipIcmpInParmProbs      Counter32,
  cipIcmpInSrcQuenchs     Counter32,
  cipIcmpInRedirects      Counter32,
  cipIcmpInEchos          Counter32,
  cipIcmpInAddrMaskReps   Counter32,
  cipIcmpOutMsgs          Counter32,
  cipIcmpOutErrors        Counter32,
  cipIcmpOutDestUnreachs  Counter32,
  cipIcmpOutEchos         Counter32,
  cipIcmpOutEchoReps      Counter32,
  cipIcmpOutTimestamps    Counter32,
  cipIcmpOutTimestampReps Counter32,
  cipIcmpOutAddrMasks     Counter32,
  cipIcmpOutAddrMaskReps  Counter32
}

cipIcmpInMsgs OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The total number of ICMP messages which the
    entity received.  Note that this counter includes
    all those counted by icmpInErrors."
  ::= { cipIcmpEntry 1 }

cipIcmpInErrors OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP messages which the entity
    received but determined as having ICMP-specific
    errors (bad ICMP checksums, bad length, etc.)."
  ::= { cipIcmpEntry 2 }

cipIcmpInDestUnreachs OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Destination Unreachable
    messages received."
  ::= { cipIcmpEntry 3 }

cipIcmpInTimeExcds OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Time Exceeded messages received."
  ::= { cipIcmpEntry 4 }

cipIcmpInParmProbs OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Parameter Problem messages received."
  ::= { cipIcmpEntry 5 }

cipIcmpInSrcQuenchs OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Source Quench messages received."
  ::= { cipIcmpEntry 6 }

cipIcmpInRedirects OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Redirect messages received."
  ::= { cipIcmpEntry 7 }

cipIcmpInEchos OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Echo (request) messages received."
  ::= { cipIcmpEntry 8 }

cipIcmpInAddrMaskReps OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Address Mask Reply messages
    received."
  ::= { cipIcmpEntry 9 }

cipIcmpOutMsgs OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The total number of ICMP messages which this
    entity attempted to send.  Note that this counter
    includes all those counted by icmpOutErrors."
  ::= { cipIcmpEntry 10 }

cipIcmpOutErrors OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP messages which this entity did
    not send due to problems discovered within ICMP
    such as a lack of buffers.  This value should not
    include errors discovered outside the ICMP layer
    such as the inability of IP to route the resultant
    datagram.  In some implementations there may be no
    types of error which contribute to this counter's
    value."
  ::= { cipIcmpEntry 11 }

cipIcmpOutDestUnreachs OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Destination Unreachable messages sent."
  ::= { cipIcmpEntry 12 }

cipIcmpOutEchos OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Echo (request) messages sent."
  ::= { cipIcmpEntry 13 }

cipIcmpOutEchoReps OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Echo Reply messages sent."
  ::= { cipIcmpEntry 14 }

cipIcmpOutTimestamps OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Timestamp (request) messages sent."
  ::= { cipIcmpEntry 15 }

cipIcmpOutTimestampReps OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Timestamp Reply messages sent."
  ::= { cipIcmpEntry 16 }

cipIcmpOutAddrMasks OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Address Mask Request messages sent."
  ::= { cipIcmpEntry 17 }

cipIcmpOutAddrMaskReps OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of ICMP Address Mask Reply messages sent."
  ::= { cipIcmpEntry 18 }


cipUdpTable OBJECT-TYPE
  SYNTAX SEQUENCE OF CipUdpEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
   "This table contains a list of parameters pertaining to 
    each UDP stack. Rows are dynamically added to this 
    table via CMCC TCP application MIBS 
    (ie. CISCO-TCPOFFLOAD-MIB)."
  ::= { cipUdpObjects 1 }

cipUdpEntry OBJECT-TYPE
  SYNTAX      CipUdpEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
    "A list of UDP stack values."
  INDEX   {
    ifIndex,
    cipIpAddress
  }
  ::= { cipUdpTable 1 }

CipUdpEntry ::= SEQUENCE
{
  cipUdpInDatagrams  Counter32,
  cipUdpNoPorts      Counter32,
  cipUdpInErrors     Counter32,
  cipUdpOutDatagrams Counter32
}

cipUdpInDatagrams OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The total number of UDP datagrams delivered to
     UDP users."
  ::= { cipUdpEntry 1 }

cipUdpNoPorts OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The total number of received UDP datagrams for
     which there was no application at the destination
     port."
  ::= { cipUdpEntry 2 }

cipUdpInErrors OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The number of received UDP datagrams that could
     not be delivered for reasons other than the lack
     of an application at the destination port."
  ::= { cipUdpEntry 3 }

cipUdpOutDatagrams OBJECT-TYPE
  SYNTAX      Counter32
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The total number of UDP datagrams sent from this entity."
  ::= { cipUdpEntry 4 }

cipUdpListenersTable OBJECT-TYPE
  SYNTAX SEQUENCE OF CipUdpListenersEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
   "This table contains a list of parameters pertaining to the 
    listeners for a particular UDP stack."
  ::= { cipUdpObjects 2 }

cipUdpListenersEntry OBJECT-TYPE
  SYNTAX      CipUdpListenersEntry
  MAX-ACCESS  not-accessible
  STATUS      current
  DESCRIPTION
    "A list of UDP listener values."
  INDEX   {
    ifIndex,
    cipIpAddress,
    cipUdpLocalPort
  }
  ::= { cipUdpListenersTable 1 }

CipUdpListenersEntry ::= SEQUENCE
{
  cipUdpLocalPort     INTEGER
}

cipUdpLocalPort OBJECT-TYPE
  SYNTAX      INTEGER (0..65535)
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
    "The local port number for this UDP listener."
  ::= { cipUdpListenersEntry 1 }

--
-- Conformance Information
--

ciscoCipTcpIpMibConformance OBJECT IDENTIFIER ::= { ciscoCipTcpIpMIB 2 }
ciscoCipTcpIpMibCompliances OBJECT IDENTIFIER ::= 
  { ciscoCipTcpIpMibConformance 1 }
ciscoCipTcpIpMibGroups OBJECT IDENTIFIER ::= 
  { ciscoCipTcpIpMibConformance 2 }

--
-- Compliance Statements
--

ciscoCipTcpIpMibCompliance MODULE-COMPLIANCE
  STATUS current
  DESCRIPTION
    "The compliance statement for the CMCC TCP/IP Stack."
  MODULE
    MANDATORY-GROUPS {
      ciscoCipTcpIpGroup
    }
    OBJECT cipIpForwarding
    MIN-ACCESS read-only
    DESCRIPTION "Write access not required"
    
    OBJECT cipIpDefaultTTL
    MIN-ACCESS read-only
    DESCRIPTION "Write access not required"
    
    OBJECT cipTcpConnState
    MIN-ACCESS read-only
    DESCRIPTION "Write access not required"
    
  ::= { ciscoCipTcpIpMibCompliances 1 }

ciscoCipTcpIpGroup OBJECT-GROUP
  OBJECTS {
    -- cipIpTable
    cipIpForwarding,
    cipIpDefaultTTL,
    cipIpInReceives,
    cipIpInHdrErrors,
    cipIpInAddrErrors,
    cipIpForwDatagrams,
    cipIpInUnknownProtos,
    cipIpInDiscards,
    cipIpInDelivers,
    cipIpOutRequests,
    cipIpOutDiscards,
    cipIpOutNoRoutes,
    cipIpReasmTimeout,
    cipIpReasmReqds,
    cipIpReasmOKs,
    cipIpReasmFails,
    cipIpFragOKs,
    cipIpFragFails,
    cipIpFragCreates,
    cipIpRoutingDiscards,
    
    -- cipTcpStackTable
    cipTcpRtoAlgorithm,
    cipTcpRtoMin,
    cipTcpRtoMax,
    cipTcpMaxConn,
    cipTcpActiveOpens,
    cipTcpPassiveOpens,
    cipTcpAttemptFails,
    cipTcpEstabResets,
    cipTcpCurrEstab,
    cipTcpInSegs,
    cipTcpOutSegs,
    cipTcpRetransSegs,
    cipTcpInErrs,
    cipTcpOutRsts,
    
    -- cipTcpConnTable
    cipTcpConnState,
    cipTcpConnInBytes,
    cipTcpConnInHCBytes,
    cipTcpConnOutBytes,
    cipTcpConnOutHCBytes,
    
    -- cipIcmpTable
    cipIcmpInMsgs,
    cipIcmpInErrors,
    cipIcmpInDestUnreachs,
    cipIcmpInTimeExcds,
    cipIcmpInParmProbs,
    cipIcmpInSrcQuenchs,
    cipIcmpInRedirects,
    cipIcmpInEchos,
    cipIcmpInAddrMaskReps,
    cipIcmpOutMsgs,
    cipIcmpOutErrors,
    cipIcmpOutDestUnreachs,
    cipIcmpOutEchos,
    cipIcmpOutEchoReps,
    cipIcmpOutTimestamps,
    cipIcmpOutTimestampReps,
    cipIcmpOutAddrMasks,
    cipIcmpOutAddrMaskReps,
    
    -- cipUdpTable
    cipUdpInDatagrams,
    cipUdpNoPorts,
    cipUdpInErrors,
    cipUdpOutDatagrams,
    
    -- cipUdpListenersTable
    cipUdpLocalPort
  }
  STATUS current
  DESCRIPTION
    "A collection of objects providing information for 
     the CMCC TCP/IP protocol stacks."
  ::= { ciscoCipTcpIpMibGroups 1 }
END