CISCO-DS1-EXT-MIB device MIB details by Cisco

CISCO-DS1-EXT-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-DS1-EXT-MIB.

Vendor:	Cisco
Mib:	CISCO-DS1-EXT-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- ciscoDs1ExtMIB MIB 
--
-- Extension to DS1-MIB.
--
-- Mar 2001, Subra Hegde
--
-- Sept 2001, Prasanna Mucharikar
--
-- February 2003, Yizhong Shen
--
-- Copyright (c) 2000, 2003 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

 
CISCO-DS1-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,
    Counter32,Integer32,
    Gauge32                  FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    NOTIFICATION-GROUP,
    OBJECT-GROUP             FROM SNMPv2-CONF
    TruthValue,
    TEXTUAL-CONVENTION,
    RowStatus                FROM SNMPv2-TC
    ConfigIterator,
    BulkConfigResult         FROM CISCO-TC
    OwnerString              FROM RMON-MIB
    ifIndex                  FROM IF-MIB
-- DNP      
-- DNP  The following 7 lines are added to support CINDEX
    dsx1ConfigEntry,
    dsx1CurrentEntry,
    dsx1TotalEntry,
    dsx1FarEndCurrentEntry,
    dsx1FarEndIntervalEntry,
    dsx1FarEndTotalEntry,
    dsx1IntervalEntry
                             FROM DS1-MIB
    PerfCurrentCount, 
    PerfIntervalCount,
    PerfTotalCount           FROM PerfHist-TC-MIB
    ciscoMgmt                FROM CISCO-SMI;
 
ciscoDs1ExtMIB MODULE-IDENTITY
    LAST-UPDATED   "200302250000Z"
    ORGANIZATION   "Cisco Systems, Inc."
    CONTACT-INFO
                   "Cisco Systems
                    Customer Service
            Postal: 170 W Tasman Drive
                    San Jose, CA  95134
                    USA
                    Tel: +1 800 553-NETS
            E-mail: cs-wanatm@cisco.com"
    DESCRIPTION
        "The MIB module to describe DS1/E1 interface objects. This is
         an extension to the standard DS1/E1 MIB (RFC 2495).

         Unless mentioned, the DS1 interface refers to both 
         T1/E1 interfaces.

         Terminology ( Taken From RFC2495)

         AIS - Alarm Indication Signal

         LOS - Loss Of Signal

         LOF - Loss Of Frame
         
         Yellow Alarm - Far End LOF.
           
         Red Alarm    - Near End LOF.
 
         BPV - Bipolar Violation for an AMI-coded signal is the 
               occurrence of a pulse of the same polarity as the 
               previous pulse.
               A BPV error event for a B8ZS- or HDB3- coded signal
               is the occurrence of a pulse of the same polarity as 
               the previous pulse without being part of the zero
               substitution code. (See TR-TSV-000773 Section 3.5.1.1)

         EXZ - An Excessive Zeroes error event for an AMI-coded
               signal is the occurrence of more than fifteen
               contiguous zeroes. For a B8ZS coded signal, 
               the defect occurs when more than seven contiguous 
               zeroes are detected.

         LCV - Line Coding Violation is the occurrence of either
               Bipolar Violation (BPV) or Excessive Zeroes (EXZ)
               error event.
         
         PCV - A Path Coding Violation error event is a frame
               synchronization bit error in the D4 and E1-noCRC formats,
               or a CRC or frame synch. bit error in the ESF and E1-CRC 
               formats. (Also known as CV-P; See T1.231 Section 6.5.2.1)

         CS - A Controlled Slip is the replication or deletion of the 
              payload bits of a DS1 frame. (See T1.231 Section 6.1.1.2.3)
              A Controlled Slip may be performed when there is a 
              difference between the timing of a synchronous 
              receiving terminal and the received signal.  A Controlled 
              Slip does not cause an Out of Frame defect.

         LES  - Line Errored Seconds. A LES is a second in which one or
                more LCV error events are detected. (See TR-TSV-000773 
                Section 3.5.1.1)

         ES   - Errored Seconds (ES). For ESF and E1-CRC links an ES
                is a second with one or more PCV or one or more OOF 
                defects OR one or more CS events OR a detected AIS
                defect. (See TR-TSV-000773 Section 3.5.1.1)

                For D4 and EN-noCRC links, the presence of BPVs also 
                triggers an ES.

                This is not incremented during an UAS.

         BES  - Bursty Errored Seconds. A BES is a second with fewer
                than 1 PCV error events, no Severely Errored Frame 
                defects and no detected incoming AIS defects. The
                CS are not included in this parameter.
 
                This is not incremented during an UAS. It applies to 
                ESF signals only.

         SES  - Severely Errored Seconds. A SES for ESF signals is a 
                second with 320 or more PCV error events OR one or 
                more OOF defects OR a detected AIS defect.
                (See TR-TSV-000773 Section 3.5.1.1)

                For E1-CRC signals, a SES is a second with 832 or
                PCV error events OR one or more OOF defects.

                For E1-noCRC signals, a SES is a 2048 LCVs or more.

                For D4 signals, a SES is a count of one second
                intervals with Framing Error events, or an OOF defect,
                or 1544 LCVs or more.

         SEFS - Severely Errored Framing Second. An SESF is a second
                with one or more OOF defects OR a detected AIS defect.
                (Also known as SAS-P (SEF/AIS second).
                (See TR-TSV-000773 Section 3.5.1.1)

         DM   - Degraded Minutes. A DM is one in which the estimated
                error rate exceeds 1E-6 but does not exceed 1E-3.

         UAS  - Unavailable Seconds. The UAS are calculated by counting
                the number of seconds that the interface is unavailable.
         
         CSS  - Controlled Slip Seconds. A CSS is a one-second interval 
                containing one or more controlled slips. This is not
                incremented during an Unavailable Second.

         LSES - Line Severely Errored Seconds is defined as a count of
                1-second intervals with 1544 Bipolar Violations plus
                Excessive Zeros event or one or more LOS defects.

         PSAS - Path SEF/AIS (PSAS) encountered.
        "     
        REVISION      "200302250000Z"
        DESCRIPTION
            "Add new table: cds1CallConfigTable"
        REVISION      "200212300000Z"
        DESCRIPTION
            "Add the following objects to cds1ConfigTable:
                 cds1Repetition, 
                 cds1RepetitionOwner, 
                 cds1RepetitionResult. "
        REVISION      "200109130000Z"
        DESCRIPTION
            "Initial version of the MIB module."

     --  REFERENCE
     --      "RFC 2495, Section 2.4.3, 2.4.4."
    ::= { ciscoMgmt 229 }
 
ciscoDs1MIBObjects  OBJECT IDENTIFIER ::= { ciscoDs1ExtMIB 1 }

cds1Config             OBJECT IDENTIFIER ::= { ciscoDs1MIBObjects 1 }
cds1Alarm              OBJECT IDENTIFIER ::= { ciscoDs1MIBObjects 2 }
cds1Stats              OBJECT IDENTIFIER ::= { ciscoDs1MIBObjects 3 }
cds1NotificationPrefix OBJECT IDENTIFIER ::= { ciscoDs1MIBObjects 4 }

--
-- textual conventions
--

PerfCurrent24HourCount ::= TEXTUAL-CONVENTION
    STATUS  current
    DESCRIPTION
        "A counter associated with a
        performance measurement in the current 24 
        hour measurement interval. The value
        of this counter starts from zero and is
        increased when associated events occur,
        until the end of the 24 hour interval.
        In case where the agent has no valid 
        data available for the current interval the
        corresponding object instance is not
        available and upon a retrieval request
        a corresponding error message shall be
        returned to indicate that this instance
        does not exist (for example, a noSuchName
        error for SNMPv1 and a noSuchInstance for
        SNMPv2 GET operation)."
    SYNTAX  Gauge32


PerfPrevious24HourCount ::= TEXTUAL-CONVENTION
    STATUS  current
    DESCRIPTION
        "A counter associated with a
        performance measurement in the previous 24 
        hour measurement interval. The value
        of this counter starts from zero and is
        increased when associated events occur,
        until the end of the 24 hour interval.
        In case where the agent has no valid 
        data available for the current interval the
        corresponding object instance is not
        available and upon a retrieval request
        a corresponding error message shall be
        returned to indicate that this instance
        does not exist (for example, a noSuchName
        error for SNMPv1 and a noSuchInstance for
        SNMPv2 GET operation)."
    SYNTAX  Gauge32

-- --------------------------------------------------------------
-- DS1 Configuration Table
-- --------------------------------------------------------------

cds1ConfigTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Cds1ConfigEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The DS1 Configuration table. This table has objects
        for configuring DS1 interfaces."
    ::= { cds1Config 1 }

cds1ConfigEntry OBJECT-TYPE
    SYNTAX     Cds1ConfigEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "An entry in the table. There is an entry for each available
       DS1/E1 interface identified by ifType value of ds1(18).
       By default, interfaces are disabled."
    AUGMENTS { dsx1ConfigEntry  }
    ::= { cds1ConfigTable 1 }
 
Cds1ConfigEntry ::=
    SEQUENCE {
        cds1LineType                    INTEGER,
        cds1LoopbackCodeDetection       TruthValue,
        cds1Repetition                  ConfigIterator,
        cds1RepetitionOwner             OwnerString,
        cds1RepetitionResult            BulkConfigResult
    }

cds1LineType OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        dsx1ESF(2),
        dsx1D4(3),
        dsx1E1(4),
        dsx1E1CRC(5),
        dsx1E1MF(6),
        dsx1E1CRCMF(7),
        dsx1Unframed(8),
        dsx1E1Unframed(9),
        dsx1DS2M12(10),
        dsx2E2(11),
        dsx1E1Q50(20),
        dsx1E1Q50CRC(21)
    }
    MAX-ACCESS read-write
    STATUS     current 
    DESCRIPTION
        "This variable indicates  the  variety  of  DS1
        Line  implementing  this  circuit.  The type of
        circuit affects the number of bits  per  second
        that  the circuit can reasonably carry, as well
        as the interpretation of the  usage  and  error
        statistics.

        The reasons behind adding 'cds1Linetype' object (apart 
        from 'dsx1LineType' in DS1-MIB.my) for 'line type', with 
        enums from 'other(1)' to 'dsx2E2(11)' replicated,  are 
        following: 
        1) Addition of the two new enums (viz. 'dsx1E1Q50' and
        'dsx1E1Q50CRC') in the standard DS1-MIB might not take 
        place in near future; that's why it was decided to 
        have a new object 'cds1LineType'. 
        2) A way was needed to be provided to configure 'line type'
        from CLI (Command Line Interface) for service modules 
        supporting line type values from 'dsx1LineType' as well as 
        'cds1LineType', without having to modify two separate 
        parameters and at the same time, making sure that CLI 
        parameter values directly map to the MIB values.

        Hence, enums from 'other(1)' to 'dsx2E2(11)' from object 
        'dsx1LineType' are replicated, and the new enums are added 
        as 'dsx1E1Q50(20)' and 'dsx1E1Q50CRC(21)'. The gap between 
        'dsx2E2(11)' and 'dsx1E1Q50(20)' provides a safe margin 
        in the case of modifications in 'dsx1LineType' in future; 
        so the CLI can still have the same enums as the standard
        MIB.

        It is to be noted that objects 'dsx1LineType' and 
        'cds1LineType' are mutually exclusive. Setting both in a 
        SET request (with the exception of value 'other(1)') 
        should result into an 'INCONSISTENT VALUE' error.

        In the case of successive 'SET' requests, the value 
        associated with the latest request should prevail
        irrespective of the object ('dsx1LineType' or 
        'cds1LineType') used.
        
        Following values reflect the corresponding values
        in 'dsx1LineType' object in DS1-MIB.

        dsx1ESF         Extended SuperFrame DS1 (T1.107)
        dsx1D4          AT&T D4 format DS1 (T1.107)
        dsx1E1          ITU-T Recommendation G.704 (Table 4a)
        dsx1E1-CRC      ITU-T Recommendation G.704 (Table 4b)
        dsxE1-MF        G.704 (Table 4a) with TS16
                        multiframing enabled
        dsx1E1-CRC-MF   G.704 (Table 4b) with TS16
                        multiframing enabled
        dsx1Unframed    DS1 with No Framing
        dsx1E1Unframed  E1 with No Framing (G.703)
        dsx1DS2M12      DS2 frame format (T1.107)
        dsx1E2          E2 frame format (G.704)

        The recommended value for 'dsx1LineType' object is 
        'other'(1) for following values.

        dsx1E1Q50(20)  ITU-T G.704 with TS16 bits 5,7,8 set to
                       101. In all the other cases TS16 bits 5,7,8
                       set to 111.(Table 14)
        dsx1E1Q50CRC(21): dsx1E1Q50 with CRC.

       For clarification, the capacity for each E1 type
       is as listed below:
       dsx1E1Unframed - E1, no framing = 32 x 64k = 2048k
       dsx1E1 or dsx1E1CRC - E1, with framing,
       no signalling = 31 x 64k = 1984k
       dsx1E1MF or dsx1E1CRCMF - E1, with framing,
       signalling = 30 x 64k = 1920k

       For further information See ITU-T Recomm G.704"
       REFERENCE
           "ITU-T G.704."
        ::= { cds1ConfigEntry 1 }

cds1LoopbackCodeDetection OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     current 
    DESCRIPTION
        "This object is used to enable or disable the detection
         of far end loop back requests (inband or 
         out-of-band (ESF)).
         The loopback detection is enabled by setting this object 
         to 'true' and loopback detection is disabled by setting
         this object to 'false'. The value of this object does not 
         have any impact on the way dsx1LoopbackConfig object is
         implemented."
    DEFVAL { false }
    ::= { cds1ConfigEntry 2 }


cds1Repetition OBJECT-TYPE
    SYNTAX     ConfigIterator
    MAX-ACCESS read-write
    STATUS     current 
    DESCRIPTION
        "This object is used to repeatedly apply the writable objects
         of dsx1ConfigTable and cds1ConfigTable specified in the same
         SNMP PDU starting from the row indicated by the index of the
         instance for the number of rows specified in this object.

         The order of operation is iterated through the logical
         order of the DS1 lines. Whether the iteration will be applied
         across the physical boundary or not is depended on the
         system implmentation.

         The GET operation on this object will always return 1."
    DEFVAL { 1 }
    ::= { cds1ConfigEntry 3 }
 
cds1RepetitionOwner OBJECT-TYPE
   SYNTAX           OwnerString
   MAX-ACCESS       read-write
   STATUS           current
   DESCRIPTION
       "This object is used for error checking of the operation
        specified in cds1Repetition.
 
        The value of this object is set by the SNMP manager
        for its own identifier at the same time as issuing the bulk
        operation by setting cds1Repetition.
        Later on, the SNMP manager should check the value of this
        object, if it is the same with the SNMP manager name,
        then the value of cds1RepetitionResult indicates the
        result of bulk operation initiated by this SNMP manager."
    ::= { cds1ConfigEntry 4 }

cds1RepetitionResult OBJECT-TYPE
    SYNTAX           BulkConfigResult 
    MAX-ACCESS       read-only
    STATUS           current 
    DESCRIPTION
       "This object is used for error checking of the operation
        specified in cds1Repetition.
 
        This object indicates the result of bulk configuraton
        initiated by the SNMP manager specified in the value of
        cds1RepetitionOwner."
    ::= { cds1ConfigEntry 5 }

-- ---------------------------------------------------------------------
-- DS1 Call Table
-- ---------------------------------------------------------------------

cds1CallConfigTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Cds1CallConfigEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The DS1 Configuration table for call related parameters.
        "
    ::= { cds1Config 2 }

cds1CallConfigEntry OBJECT-TYPE
    SYNTAX     Cds1CallConfigEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The entry in this table is for DS1/E1 interface which
         need call related configuraton.
        "
    AUGMENTS { dsx1ConfigEntry  }
    ::= { cds1CallConfigTable 1 }
 
Cds1CallConfigEntry ::=
    SEQUENCE {
        cds1CallTrunkConditionEnable        TruthValue
    }

cds1CallTrunkConditionEnable OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     current 
    DESCRIPTION
        "This object specifies whether trunk-condition is enabled.
         The value 'true' means trunk-condition enable and the
         value 'false'  means trunk-condition disable.
         If this object is set to 'true', gateway will apply 
         trunk conditioning on the DS0's of this DS1 interface
         that are in alarm. 
         Trunk Conditioning - gateway will transmit idle code pattern 
         for the first 2.5 secs and then transmit seized code, both
         idle code and seized code are specified by the 'ds0IdleCode'
         and 'ds0SeizedCode' MIB objects in the CISCO-CAS-IF-EXT-MIB.

         This object is applicable for trunking applications only.
        "
    DEFVAL { false }
    ::= { cds1CallConfigEntry 1 }


-- --------------------------------------------------------------
--
-- DS1 Current 15 minute table
--
-- --------------------------------------------------------------

cds1CurrentTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Cds1CurrentEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The DS1 current table contains various statistics
        being collected for the current 15 minute interval."
    ::= { cds1Stats 1 }
 
cds1CurrentEntry OBJECT-TYPE
    SYNTAX     Cds1CurrentEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "An entry in the DS1 current table. An entry in
        this table is automatically created when a line activated."
    AUGMENTS { dsx1CurrentEntry }
    ::= { cds1CurrentTable 1 }
 
Cds1CurrentEntry ::=
    SEQUENCE {
        cds1CurrentLSESs   PerfCurrentCount,
        cds1CurrentPSASs   PerfCurrentCount
        }

cds1CurrentLSESs OBJECT-TYPE
    SYNTAX     PerfCurrentCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of LSES (Line Severely Errored Seconds) 
         encountered by the interface."
    REFERENCE "ANSI T1.231-1997 Section 6.5.1.3"
    ::= { cds1CurrentEntry 1 }

cds1CurrentPSASs OBJECT-TYPE
    SYNTAX     PerfCurrentCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of Path SEF/AIS (PSAS) encountered
         by the ds1 interface."
    REFERENCE "ANSI T1.231-1997 Section 6.5.1.3"
    ::= { cds1CurrentEntry 2 }

-- --------------------------------------------------------------
--
-- DS1 Interval table
--
-- --------------------------------------------------------------

cds1IntervalTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Cds1IntervalEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The DS1 interval table contains various statistics
        collected by each DS1 interface over the previous 24
        hours of operation. The past 24 hours are broken into
        96 completed 15 minute intervals. Each row in this
        table represents one such interval (identified by
        dsx1IntervalNumber) for one specific instance
        (identified by ifIndex)."
    ::= { cds1Stats 2 }
 
cds1IntervalEntry OBJECT-TYPE
    SYNTAX     Cds1IntervalEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "An entry in the DS1 interval table."
    AUGMENTS { dsx1IntervalEntry }
    ::= { cds1IntervalTable 1 }
 
Cds1IntervalEntry ::=
    SEQUENCE {
        cds1IntervalLSESs   PerfIntervalCount,
        cds1IntervalPSASs   PerfIntervalCount
        }

cds1IntervalLSESs OBJECT-TYPE
    SYNTAX     PerfIntervalCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of LSES (Line Severely Errored Seconds)
        encountered by the interface."
    REFERENCE "ANSI T1.231-1997 Section 6.5.1.3"
    ::= { cds1IntervalEntry 1 }

cds1IntervalPSASs OBJECT-TYPE
    SYNTAX     PerfIntervalCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of PSAS encountered by the interface."
    ::= { cds1IntervalEntry 2 }


--
-- The DS1 Total Table
--

cds1TotalTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Cds1TotalEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The DS1 Total Table contains the cumulative sum
        of the various statistics collected for the 96 fifteen
        minutes intervals preceding the current interval."
    ::= { cds1Stats 3 }

cds1TotalEntry OBJECT-TYPE
    SYNTAX     Cds1TotalEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the DS1 Total table."
    AUGMENTS  { dsx1TotalEntry }
    ::= { cds1TotalTable 1 }

Cds1TotalEntry ::=
    SEQUENCE {
        cds1TotalLSESs    PerfTotalCount,
        cds1TotalPSASs    PerfTotalCount
    }

cds1TotalLSESs OBJECT-TYPE
    SYNTAX     PerfTotalCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The sum of Line Severely Errored Seconds (LSES)
        encountered by a DS1 interface in the previous
        96 fifteen minutes intervals."
::= { cds1TotalEntry 1 }

cds1TotalPSASs OBJECT-TYPE
    SYNTAX     PerfTotalCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The sum of Path SEF/AIS (PSAS) encountered by a
        DS1 interface in the previous 96 fifteen minutes 
        intervals"
    ::= { cds1TotalEntry 2 }

--
-- The DS1 Far End Current Table
--

cds1FarEndCurrentTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Cds1FarEndCurrentEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The DS1 Far End Current Table contains various statistics 
        collected for the current 15 minute interval. The
        statistics are collected from the far end messages 
        on the Facilities Data Link (FDL)."
    ::= { cds1Stats 4 }

cds1FarEndCurrentEntry OBJECT-TYPE
    SYNTAX      Cds1FarEndCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the cds1FarEndCurrentTable."
    AUGMENTS  { dsx1FarEndCurrentEntry }
    ::= { cds1FarEndCurrentTable 1 }

Cds1FarEndCurrentEntry ::=
    SEQUENCE {
        cds1FarEndCurrentLOFCs    PerfCurrentCount
    }

cds1FarEndCurrentLOFCs OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of Loss Of Frame Counts in the current
        15 minute interval."
    ::= { cds1FarEndCurrentEntry 1 }


--
-- The DS1 Far End Interval Table
--

cds1FarEndIntervalTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Cds1FarEndIntervalEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The DS1 Far End Interval Table contains various
        statistics collected by each DS1 interface over
        the previous 24 hours of operation.  The past 24
        hours are broken into 96 completed 15 minute
        intervals. Each row in this table represents one
        such interval (identified by
        dsx1FarEndIntervalNumber) for one specific
        instance (identified by ifIndex)."
    ::= { cds1Stats 5 }

cds1FarEndIntervalEntry OBJECT-TYPE
    SYNTAX     Cds1FarEndIntervalEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the DS1 Far End Interval table."
    AUGMENTS { dsx1FarEndIntervalEntry }
    ::= { cds1FarEndIntervalTable 1 }

Cds1FarEndIntervalEntry ::=
    SEQUENCE {
        cds1FarEndIntervalLOFCs    PerfIntervalCount
    }

cds1FarEndIntervalLOFCs OBJECT-TYPE
    SYNTAX     PerfIntervalCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of Loss Of Frame Counts encountered
        by the interface."
::= { cds1FarEndIntervalEntry 1 }

--
-- The DS1 Far End Total Table
--

cds1FarEndTotalTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Cds1FarEndTotalEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The DS1 Far End Total Table contains the
        cumulative sum of the various statistics for the
        96 fifteen minutes intervals preceding the current 
        interval."
    ::= { cds1Stats 6 }

cds1FarEndTotalEntry OBJECT-TYPE
    SYNTAX     Cds1FarEndTotalEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the DS1 Far End Total table."
    AUGMENTS  { dsx1FarEndTotalEntry }
    ::= { cds1FarEndTotalTable 1 }

Cds1FarEndTotalEntry ::=
    SEQUENCE {
        cds1FarEndTotalLOFCs            PerfTotalCount
    }

cds1FarEndTotalLOFCs OBJECT-TYPE
    SYNTAX      PerfTotalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of Loss Of Frame Counts encountered
        by the interface in the previous 96 fifteen minutes 
        interval."
    ::= { cds1FarEndTotalEntry 1 }



--
-- --------------------------------------------------------------
--
-- Statistical Alarm Threshold configuration
--
-- --------------------------------------------------------------
cds1AlarmThresholdGroupTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Cds1AlarmThresholdGroupEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The DS1 alarm threshold configuration table. This table
        contains the objects associated with threshold
        values for different statistics.

        The thresholds may be configured for:

               BES  - Bursty Errored Seconds
               CSS  - Controlled Slip Seconds
               DM   - Degraded Minutes
               ES   - Errored Seconds
               LCV  - Line Code Violations
               LES  - Line Errored Seconds
               LSES - Line Severely Errored Seconds
               PCV  - Path Coding Violations
               PSAS - Path SEF/AIS Second
               SES  - Severely Errored Seconds
               SEFS - Severely Errored Framing Seconds
               UAS  - Unavailable Seconds
       "
    ::= { cds1Alarm 1 }

cds1AlarmThresholdGroupEntry OBJECT-TYPE
    SYNTAX     Cds1AlarmThresholdGroupEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION     
       "This identifies the unique threshold entry in
       cds1AlarmThresholdGroupTable.
       The number of entries allowed is implementation 
       specific.
       The values set in the respective threshold objects
       determine the values which when exceeded in a 15 
       minute or 24 hour window, will raise alarm by 
       generating 'cds1StatThresholdAlarm' trap.
       
       An entry is created by setting 
       'cds1AlarmThresholdGroupRowStatus' to 'createAndGo(4)' 
       and is deleted by setting it to 'destroy(6)'."
    INDEX    { cds1AlarmThresholdGroupIndex }
    ::= { cds1AlarmThresholdGroupTable 1 }

Cds1AlarmThresholdGroupEntry ::=
    SEQUENCE {
        cds1AlarmThresholdGroupIndex             Integer32,
        cds1Current15MinBESsThreshold            Integer32,
        cds1Current24HrBESsThreshold             Integer32,
        cds1Current15MinCSSsThreshold            Integer32,
        cds1Current24HrCSSsThreshold             Integer32,
        cds1Current15MinDMsThreshold             Integer32,
        cds1Current24HrDMsThreshold              Integer32,
        cds1Current15MinESsThreshold             Integer32,
        cds1Current24HrESsThreshold              Integer32,
        cds1Current15MinLCVsThreshold            Integer32,
        cds1Current24HrLCVsThreshold             Integer32,
        cds1Current15MinLESsThreshold            Integer32,
        cds1Current24HrLESsThreshold             Integer32,
        cds1Current15MinLSESsThreshold           Integer32,
        cds1Current24HrLSESsThreshold            Integer32,
        cds1Current15MinPCVsThreshold            Integer32,
        cds1Current24HrPCVsThreshold             Integer32,
        cds1Current15MinPSASsThreshold           Integer32,
        cds1Current24HrPSASsThreshold            Integer32,
        cds1Current15MinSESsThreshold            Integer32,
        cds1Current24HrSESsThreshold             Integer32,
        cds1Current15MinSEFSsThreshold           Integer32,
        cds1Current24HrSEFSsThreshold            Integer32,
        cds1Current15MinUASsThreshold            Integer32,
        cds1Current24HrUASsThreshold             Integer32,
        cds1AlarmThresholdGroupRowStatus         RowStatus
        }


cds1AlarmThresholdGroupIndex OBJECT-TYPE
  SYNTAX     Integer32 (1..2147483647)
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
        "An unique value identifying an entry in 
        cds1AlarmThresholdGroupTable."
   ::= { cds1AlarmThresholdGroupEntry 1 }

cds1Current15MinBESsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for BES."
    REFERENCE 
        "RFC2495"
    DEFVAL { 2147483647 }
    ::= { cds1AlarmThresholdGroupEntry  2  }


cds1Current24HrBESsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for BES."
    REFERENCE 
        "RFC2495"
    DEFVAL { 2147483647 }
    ::= { cds1AlarmThresholdGroupEntry 3 }

cds1Current15MinCSSsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for CSS."
    REFERENCE 
        "RFC2495"
    DEFVAL { 2147483647 }
    ::= { cds1AlarmThresholdGroupEntry 4  }


cds1Current24HrCSSsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for CSS."
    REFERENCE 
        "RFC2495"
    DEFVAL { 2147483647 }
    ::= { cds1AlarmThresholdGroupEntry 5  }

cds1Current15MinDMsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for DM."
    REFERENCE 
        "RFC2495"
    DEFVAL { 2147483647 }
    ::= { cds1AlarmThresholdGroupEntry 6  }


cds1Current24HrDMsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for DM."
    REFERENCE 
        "RFC2495"
    DEFVAL { 2147483647 }
    ::= { cds1AlarmThresholdGroupEntry 7  }

cds1Current15MinESsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for ES."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 12 }
    ::= { cds1AlarmThresholdGroupEntry 8  }

cds1Current24HrESsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for ES."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 121 }
    ::= { cds1AlarmThresholdGroupEntry 9 }

cds1Current15MinLCVsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for LCV."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 14 }
    ::= { cds1AlarmThresholdGroupEntry 10  }


cds1Current24HrLCVsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for LCV."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 134 }
    ::= { cds1AlarmThresholdGroupEntry 11 }

cds1Current15MinLESsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for LES."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 12 }
    ::= { cds1AlarmThresholdGroupEntry 12  }


cds1Current24HrLESsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for LES."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 121 }
    ::= { cds1AlarmThresholdGroupEntry 13 }

cds1Current15MinLSESsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for LSES."
    REFERENCE 
        "ANSI T1.231-1997 Section 6.5.1.3"
    DEFVAL { 10 }
    ::= { cds1AlarmThresholdGroupEntry 14  }


cds1Current24HrLSESsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for LSES."
    REFERENCE 
        "ANSI T1.231-1997 Section 6.5.1.3"
    DEFVAL { 100 }
    ::= { cds1AlarmThresholdGroupEntry 15 }


cds1Current15MinPCVsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for PCV."
    REFERENCE 
        "RFC2495"
    DEFVAL { 2147483647 }
    ::= { cds1AlarmThresholdGroupEntry 16  }

cds1Current24HrPCVsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for PCV."
    REFERENCE 
        "RFC2495"
    DEFVAL { 2147483647 }
    ::= { cds1AlarmThresholdGroupEntry 17 }

cds1Current15MinPSASsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for PSAS."
    REFERENCE 
        "RFC2495"
    DEFVAL { 2147483647 }
    ::= { cds1AlarmThresholdGroupEntry 18  }


cds1Current24HrPSASsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for PSAS."
    REFERENCE 
        "RFC2495"
    DEFVAL { 2147483647 }
    ::= { cds1AlarmThresholdGroupEntry 19  }

cds1Current15MinSESsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for SES."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 10 }
    ::= { cds1AlarmThresholdGroupEntry 20  }

cds1Current24HrSESsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for SES."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 100 }
    ::= { cds1AlarmThresholdGroupEntry 21 }

cds1Current15MinSEFSsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for SEFS."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 2 }
    ::= { cds1AlarmThresholdGroupEntry 22  }

cds1Current24HrSEFSsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for SEFS."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 17 }
    ::= { cds1AlarmThresholdGroupEntry 23 }

cds1Current15MinUASsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 15 minute threshold for UAS."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 10 }
    ::= { cds1AlarmThresholdGroupEntry 24  }


cds1Current24HrUASsThreshold OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "This object identifies 24 hour threshold for UAS."
    REFERENCE 
        "RFC2495, Bellcore TR-TSV-000773"
    DEFVAL { 10 }
    ::= { cds1AlarmThresholdGroupEntry 25 }

cds1AlarmThresholdGroupRowStatus OBJECT-TYPE
    SYNTAX  RowStatus
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
       "The status of this conceptual row.  This object is 
        used for creating, modifying and deleting entries 
        from cds1AlarmThresholdGroupTable.
        To create a row in this table, a manager must set 
        this object to 'createAndGo(4)'.
        An entry can be deleted by setting this object to 
        destroy'(6)'.
        An entry in this table may be modified after 
        creation.
        The active threshold configuration is indicated 
        by the object 'cds1AlarmThresholdActiveGroup'."

    ::= { cds1AlarmThresholdGroupEntry 26 }

--
-- DS1 Alarm Configuration Table
--

cds1AlarmConfigTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Cds1AlarmConfigEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The DS1 alarm configuration table. This table
        contains the objects associated with detecting 
        and declaring alarms for the DS1/E1 interfaces.
       "
    ::= { cds1Alarm 2 }

cds1AlarmConfigEntry OBJECT-TYPE
    SYNTAX     Cds1AlarmConfigEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION     
       "Alarm configuration information for a particular DS1/E1 
        interface. The thresholds for different statistics is
        identified by an entry in cds1AlarmThresholdGroupTable.
        Once the thresholds configured in cds1AlarmThresholdGroupTable
        are exceeded, minor or major alarms are raised depending on 
        the values configured in cds1StatisticalAlarmSeverity.
        Triggering of an alarm is indicated by generating a trap 
        and also through the CLI (Command Line Interface)."
      AUGMENTS { dsx1ConfigEntry }
    ::= { cds1AlarmConfigTable 1 }

Cds1AlarmConfigEntry ::=
    SEQUENCE {
        cds1StatisticalAlarmSeverity             INTEGER,
        cds1StatisticalAlarmState                BITS,
        cds1AlarmUpCount                         Integer32,
        cds1AlarmDownCount                       Integer32,
        cds1AlarmThreshold                       Integer32,
        cds1AlarmThresholdActiveGroup            Integer32
        }

cds1StatisticalAlarmSeverity OBJECT-TYPE
    SYNTAX  INTEGER {
             minor(1),
             major(2),
             none(3)
    }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This variable is used to setup the severity of any of the
         Statistical alarms. So when a Statistical Counter exceeds its
         specified threshold, the system will send the alarm with
         appropriate severity. A value of none(3) indicates that no
         alarm will be raised."
 
    DEFVAL { minor }
    ::= { cds1AlarmConfigEntry 1 }

cds1StatisticalAlarmState OBJECT-TYPE
    SYNTAX     BITS {
                 cds1BES15Min(0),
                 cds1BES24Hr(1),
                 cds1CSS15Min(2),
                 cds1CSS24Hr(3),
                 cds1DM15Min(4),
                 cds1DM24Hr(5),
                 cds1ES15Min(6),
                 cds1ES24Hr(7),
                 cds1PCV15Min(8),
                 cds1PCV24Hr(9),
                 cds1LCV15Min(10),
                 cds1LCV24Hr(11),
                 cds1LES15Min(12),
                 cds1LES24Hr(13),
                 cds1LSES15Min(14),
                 cds1LSES24Hr(15),
                 cds1PSAS15Min(16),
                 cds1PSAS24Hr(17),
                 cds1SES15Min(18),
                 cds1SES24Hr(19),
                 cds1SEFS15Min(20),
                 cds1SEFS24Hr(21),
                 cds1UAS15Min(22),
                 cds1UAS24Hr(23) }
                      
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "This is a bitmap of the DS1 Line Statistical alarms.
        A clear bitmap (i.e. no bit is set) will indicate that
        no alarms are present.
        
        The values of individual bits mean: 

            cds1BES15Min
               BES current 15 minute threshold exceeded
            cds1BES24Hr
               BES 24 hour threshold exceeded
            cds1CSS15Min
               CSS current 15 minute threshold exceeded
            cds1CSS24Hr
               CSS 24 hour threshold exceeded
            cds1DM15Min
               DM current 15 minute threshold exceeded
            cds1DM24Hr
               DM 24 hour threshold exceeded
            cds1ES15Min
               ES current 15 minute threshold exceeded
            cds1ES24Hr
               ES 24 hour threshold exceeded
            cds1PCV15Min
               PCV current 15 minute threshold exceeded
            cds1PCV24Hr
               PCV 24 hour threshold exceeded
            cds1LCV15Min
               LCV current 15 minute threshold exceeded
            cds1LCV24Hr
               LCV 24 hour threshold exceeded
            cds1LES15Min
               LES current 15 minute threshold exceeded
            cds1LES24Hr
               LES 24 hour threshold exceeded
            cds1LSES15Min
               LSES current 15 minute threshold exceeded
            cds1LSES24Hr
               LSES 24 hour threshold exceeded
            cds1PSAS15Min
               PSAS current 15 minute threshold exceeded
            cds1PSAS24Hr
               PSAS 24 Hour threshold exceeded
            cds1SES15Min
               SES current 15 minute threshold exceeded
            cds1SES24Hr
               SES 24 hour threshold exceeded
            cds1SEFS15Min
               SEFS current 15 minute threshold exceeded
            cds1SEFS24Hr
               SEFS 24 hour  threshold exceeded
            cds1UAS15Min
               UAS current 15 minute threshold exceeded
            cds1UAS24Hr
               UAS 24 hour threshold exceeded"

    ::= { cds1AlarmConfigEntry 2 }
 

cds1AlarmUpCount OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This parameter specifies the increment to the Near
        End alarm integration counters. The local alarms are
        LOS and LOF. The integration counter is incremented by
        this value every 100 ms while the alarm persists. When 
        the integration counter exceeds 'cds1AlarmThreshold' 
        an Alarm of the severity specified for the particular 
        alarm is declared.
        The integration counter is an internal counter specific
        to the implementation and dictates the slope of 
        integration."
    DEFVAL {6}
    ::= { cds1AlarmConfigEntry 3 }
 
cds1AlarmDownCount OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This parameter specifies the decrement to the Near
        End alarm integration counters. The  alarms are LOS 
        and LOF. The integration counter is decremented by
        this value every 100 ms while no alarm persists. The 
        counter does not decrement below zero. When the 
        integration counter reaches zero any Alarm previously 
        declared is removed."
    DEFVAL {1}
    ::= { cds1AlarmConfigEntry 4 }
 
cds1AlarmThreshold OBJECT-TYPE
  SYNTAX     Integer32 (0..2147483647)
  MAX-ACCESS read-write
  STATUS     current
  DESCRIPTION
        "The value set in this object determines the value that
        the alarm integration counter must reach for an near end
        alarm to be declared. If the up count is 6, and the 
        threshold 150, an Alarm is integrated in 2.5 seconds.
        If the down count is 1, then alarm will be cleared in
        15 seconds."
   DEFVAL {150}
   ::= { cds1AlarmConfigEntry 5 }

cds1AlarmThresholdActiveGroup OBJECT-TYPE
  SYNTAX     Integer32 (1..2147483647)
  MAX-ACCESS read-write
  STATUS     current
  DESCRIPTION
        "The value of this object identifies the row in the
        cds1AlarmThresholdGroupTable which contains the 
        threshold values for different statistics, and
        is currently active."
   ::= { cds1AlarmConfigEntry 6 }


-- --------------------------------------------------------------
--
-- Current 24 Hour stats table 
--
-- --------------------------------------------------------------
cds1Current24HrStatsTable OBJECT-TYPE
   SYNTAX     SEQUENCE OF Cds1Current24HrStatsEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
      "The DS1 24 hour Statistics table. A 24 hour interval 
      starts at twelve mid-night with reference to node time. 
      In case of a manual change in node time all the counters
      in this table get reset to 0." 
     ::= { cds1Stats 7 }

cds1Current24HrStatsEntry OBJECT-TYPE
    SYNTAX      Cds1Current24HrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
       "An entry in the DS1 current 24 hour table. An entry is 
       created automatically for each DS1 interface that is
       activated.
       ifEntries with ifType=ds1(18) will have an entry in this 
       table."
    INDEX   { ifIndex }
    ::= { cds1Current24HrStatsTable 1 }

Cds1Current24HrStatsEntry ::=
     SEQUENCE {
        cds1Current24HrESs              PerfCurrent24HourCount,
        cds1Current24HrSESs             PerfCurrent24HourCount,
        cds1Current24HrSEFSs            PerfCurrent24HourCount,
        cds1Current24HrUASs             PerfCurrent24HourCount,
        cds1Current24HrCSSs             PerfCurrent24HourCount,
        cds1Current24HrPCVs             PerfCurrent24HourCount,
        cds1Current24HrLESs             PerfCurrent24HourCount,
        cds1Current24HrBESs             PerfCurrent24HourCount,
        cds1Current24HrDMs              PerfCurrent24HourCount,
        cds1Current24HrLCVs             PerfCurrent24HourCount
     }

cds1Current24HrESs OBJECT-TYPE
  SYNTAX     PerfCurrent24HourCount
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "Number of ESs encountered in current 24 hour interval."
  ::= { cds1Current24HrStatsEntry 1 }

cds1Current24HrSESs OBJECT-TYPE
  SYNTAX     PerfCurrent24HourCount
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "Number of SESs encountered in current 24 hour interval."
  ::= { cds1Current24HrStatsEntry 2 }

cds1Current24HrSEFSs OBJECT-TYPE
  SYNTAX     PerfCurrent24HourCount
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "Number of SEFSs encountered in current 24 hour interval."
  ::= { cds1Current24HrStatsEntry 3 }

cds1Current24HrUASs OBJECT-TYPE
  SYNTAX     PerfCurrent24HourCount
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "Number of UASs encountered in current 24 hour interval."
  ::= { cds1Current24HrStatsEntry 4 }

cds1Current24HrCSSs OBJECT-TYPE
  SYNTAX     PerfCurrent24HourCount
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "Number of CSSs encountered in current 24 hour interval."
  ::= { cds1Current24HrStatsEntry 5 }

cds1Current24HrPCVs OBJECT-TYPE
  SYNTAX     PerfCurrent24HourCount
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "Number of PCVs encountered in current 24 hour interval."
  ::= { cds1Current24HrStatsEntry 6 }

cds1Current24HrLESs OBJECT-TYPE
  SYNTAX     PerfCurrent24HourCount
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "Number of LESs encountered in current 24 hour interval."
  ::= { cds1Current24HrStatsEntry 7 }

cds1Current24HrBESs OBJECT-TYPE
  SYNTAX     PerfCurrent24HourCount
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "Number of BESs encountered in current 24 hour interval."
  ::= { cds1Current24HrStatsEntry 8 }

cds1Current24HrDMs OBJECT-TYPE
  SYNTAX     PerfCurrent24HourCount
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "Number of DMs encountered in current 24 hour interval."
  ::= { cds1Current24HrStatsEntry 9 }

cds1Current24HrLCVs OBJECT-TYPE
  SYNTAX     PerfCurrent24HourCount
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "Number of LCVs encountered in current 24 hour interval."
  ::= { cds1Current24HrStatsEntry 10 }

-- --------------------------------------------------------------
--
-- Previous 24 Hour stats table 
--
-- --------------------------------------------------------------
cds1Previous24HrStatsTable OBJECT-TYPE
   SYNTAX     SEQUENCE OF Cds1Previous24HrStatsEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
       "Contains DS1 previous 24 hour Statistics table.
        A 24 hour interval starts at twelve midnight with 
        reference to node time."
     ::= { cds1Stats 8 }

cds1Previous24HrStatsEntry OBJECT-TYPE
     SYNTAX      Cds1Previous24HrStatsEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION 
        "An entry in DS1 previous 24 hour table.
         ifEntries with ifType=ds1(18) will have an entry in 
         this table."
     INDEX   { ifIndex }
     ::= { cds1Previous24HrStatsTable 1 }

Cds1Previous24HrStatsEntry ::=
     SEQUENCE {
        cds1Previous24HrESs              PerfPrevious24HourCount,
        cds1Previous24HrSESs             PerfPrevious24HourCount,
        cds1Previous24HrSEFSs            PerfPrevious24HourCount,
        cds1Previous24HrUASs             PerfPrevious24HourCount,
        cds1Previous24HrCSSs             PerfPrevious24HourCount,
        cds1Previous24HrPCVs             PerfPrevious24HourCount,
        cds1Previous24HrLESs             PerfPrevious24HourCount,
        cds1Previous24HrBESs             PerfPrevious24HourCount,
        cds1Previous24HrDMs              PerfPrevious24HourCount,
        cds1Previous24HrLCVs             PerfPrevious24HourCount,
        cds1Previous24HrLSESs            PerfPrevious24HourCount
     }

cds1Previous24HrESs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Number of ESs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 1 }

cds1Previous24HrSESs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Number of SESs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 2 }

cds1Previous24HrSEFSs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Number of SEFSs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 3 }

cds1Previous24HrUASs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Number of UASs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 4 }

cds1Previous24HrCSSs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Number of CSSs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 5 }

cds1Previous24HrPCVs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Number of PCVs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 6 }

cds1Previous24HrLESs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Number of LESs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 7 }

cds1Previous24HrBESs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Number of BESs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 8 }

cds1Previous24HrDMs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
     "Number of DMs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 9 }

cds1Previous24HrLCVs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Number of LCVs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 10 }

cds1Previous24HrLSESs OBJECT-TYPE
    SYNTAX     PerfPrevious24HourCount
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Number of LSESs encountered in previous 24 hour interval."
    ::= { cds1Previous24HrStatsEntry 11 }

-- --------------------------------------------------------------
--
--  Error Stats Table
--
-- --------------------------------------------------------------
cds1ErrStatsTable OBJECT-TYPE
   SYNTAX     SEQUENCE OF Cds1ErrStatsEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
      "The DS1 error statistics table. This table contains
      the statistics since the systems was up or last
      re-initialized." 
     ::= { cds1Stats 9 }

cds1ErrStatsEntry OBJECT-TYPE
    SYNTAX      Cds1ErrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
       "An entry in the DS1 Error Stats Table.
        ifEntries with ifType=ds1(18) will have an entry in 
        this table."
    INDEX   { ifIndex }
    ::= { cds1ErrStatsTable 1 }

Cds1ErrStatsEntry ::=
     SEQUENCE {
        cds1LOSCounts            Counter32,
        cds1OOFCounts            Counter32,
        cds1RAICounts            Counter32,
        cds1FECounts             Counter32
     }

cds1LOSCounts OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of times the Loss Of Signal defect was detected
        with or without integrating to LOS alarm."
    ::= { cds1ErrStatsEntry 1 }
 
cds1OOFCounts OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of times the Out of Frame (OOF) was detected
        with or without integrating to OOF alarm."
    ::= { cds1ErrStatsEntry 2 }
 
cds1RAICounts OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of times Yellow Alarms was detected
        with or without integrating to RAI alarm."
    ::= { cds1ErrStatsEntry 3 }
 
cds1FECounts OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of Framing Pattern Errors encountered
        by the DS1 interface."
    ::= { cds1ErrStatsEntry 4 }
 

-- --------------------------------------------------------------
--
-- ciscoDs1 Notifications
--
-- --------------------------------------------------------------

cds1Notifications
        OBJECT IDENTIFIER ::= { cds1NotificationPrefix 0 }

cds1StatThresholdAlarm NOTIFICATION-TYPE
    OBJECTS {         
        cds1StatisticalAlarmState
    }
    STATUS  current
    DESCRIPTION
        "A cds1StatThresholdAlarm trap is sent by an agent to 
        notify the NMS about a statistical alarm condition.
        Such an alarm condition exists when a statistical counter 
        exceeds its specified threshold.
        
        For example : If value in object dsx1CurrentBESs exceeds 
        the value in the object cds1Current15MinBESsThreshold, a  
        cds1StatThresholdAlarm trap will be generated."

    ::= { cds1Notifications 1 } 

-- conformance information 

ciscoDs1MIBConformance OBJECT IDENTIFIER ::= { ciscoDs1ExtMIB 3 }
ciscoDs1MIBCompliances OBJECT IDENTIFIER ::=
                          { ciscoDs1MIBConformance 1 }
ciscoDs1MIBGroups      OBJECT IDENTIFIER ::= 
                          { ciscoDs1MIBConformance 2 }

ciscoDs1MIBCompliance MODULE-COMPLIANCE
     STATUS deprecated -- superseded by ciscoDs1MIBComplianceRev1
     DESCRIPTION
        "Compliance statement for Cisco DS1 Extension MIB."
     MODULE -- this module
     MANDATORY-GROUPS { 
         ciscoDs1ConfMIBGroup,
         ciscoDs1CurrentMIBGroup,
         ciscoDs1AlarmConfigGroup,
         ciscoDs1Alarm15MinThreshGroup,
         ciscoDs1Alarm24HrThreshGroup,
         ciscoDs1Current24HrMIBGroup,
         ciscoDs1Previous24HrMIBGroup
        } 

     GROUP ciscoDs1IntervalMIBGroup
     DESCRIPTION
         "Implementation of this group is mandatory for
         a device which is able to measure the interval
         statistics."
          
     GROUP ciscoDs1TotalMIBGroup
     DESCRIPTION
         "Implementation of this group is mandatory for
         a device which is able to measure the total
         statistics."
          
     GROUP ciscoDs1StatsMIBGroup
     DESCRIPTION
         "Implementation of this group is optional."

     GROUP ciscoDs1FarEndStatsMIBGroup
     DESCRIPTION
         "Implementation of this is mandatory for the
         systems supporting far end statistics."
     ::= { ciscoDs1MIBCompliances 1 }

ciscoDs1MIBComplianceRev1 MODULE-COMPLIANCE
     STATUS deprecated -- superseded by ciscoDs1MIBComplianceRev2
     DESCRIPTION
        "Compliance statement for Cisco DS1 Extension MIB."
     MODULE -- this module
     MANDATORY-GROUPS { 
         ciscoDs1ConfMIBGroup,
         ciscoDs1CurrentMIBGroup,
         ciscoDs1AlarmConfigGroup,
         ciscoDs1Alarm15MinThreshGroup,
         ciscoDs1Alarm24HrThreshGroup,
         ciscoDs1Current24HrMIBGroup,
         ciscoDs1Previous24HrMIBGroup
        } 

     GROUP ciscoDs1IntervalMIBGroup
     DESCRIPTION
         "Implementation of this group is mandatory for
         a device which is able to measure the interval
         statistics."
          
     GROUP ciscoDs1TotalMIBGroup
     DESCRIPTION
         "Implementation of this group is mandatory for
         a device which is able to measure the total
         statistics."
          
     GROUP ciscoDs1StatsMIBGroup
     DESCRIPTION
         "Implementation of this group is optional."

     GROUP ciscoDs1FarEndStatsMIBGroup
     DESCRIPTION
         "Implementation of this is mandatory for the
         systems supporting far end statistics."

     GROUP ciscoDs1BulkConfGroup
     DESCRIPTION
         "Implementation of this is mandatory for the
          systems supporting bulk provisioning."
     ::= { ciscoDs1MIBCompliances 2 }

ciscoDs1MIBComplianceRev2 MODULE-COMPLIANCE
     STATUS deprecated -- superseded by ciscoDs1MIBComplianceRev3
     DESCRIPTION
        "Compliance statement for Cisco DS1 Extension MIB."
     MODULE -- this module
     MANDATORY-GROUPS { 
         ciscoDs1ConfMIBGroup,
         ciscoDs1CurrentMIBGroup,
         ciscoDs1AlarmConfigGroup,
         ciscoDs1AlarmThreshGroup,
         ciscoDs1Alarm15MinThreshGroupRev1,
         ciscoDs1Alarm24HrThreshGroupRev1,
         ciscoDs1Current24HrMIBGroup,
         ciscoDs1Previous24HrMIBGroup
        } 

     GROUP ciscoDs1IntervalMIBGroup
     DESCRIPTION
         "Implementation of this group is mandatory for
         a device which is able to measure the interval
         statistics."
          
     GROUP ciscoDs1TotalMIBGroup
     DESCRIPTION
         "Implementation of this group is mandatory for
         a device which is able to measure the total
         statistics."
          
     GROUP ciscoDs1StatsMIBGroup
     DESCRIPTION
         "Implementation of this group is optional."

     GROUP ciscoDs1FarEndStatsMIBGroup
     DESCRIPTION
         "Implementation of this is mandatory for the
         systems supporting far end statistics."

     GROUP ciscoDs1BulkConfGroup
     DESCRIPTION
         "Implementation of this is mandatory for the
          systems supporting bulk provisioning."
     ::= { ciscoDs1MIBCompliances 3 }

ciscoDs1MIBComplianceRev3 MODULE-COMPLIANCE
     STATUS current
     DESCRIPTION
        "Compliance statement for Cisco DS1 Extension MIB."
     MODULE -- this module
     MANDATORY-GROUPS { 
         ciscoDs1ConfMIBGroup,
         ciscoDs1CurrentMIBGroup,
         ciscoDs1AlarmConfigGroup,
         ciscoDs1AlarmThreshGroup,
         ciscoDs1Alarm15MinThreshGroupRev1,
         ciscoDs1Alarm24HrThreshGroupRev1,
         ciscoDs1Current24HrMIBGroup,
         ciscoDs1Previous24HrMIBGroup
        } 

     GROUP ciscoDs1IntervalMIBGroup
     DESCRIPTION
         "Implementation of this group is mandatory for
         a device which is able to measure the interval
         statistics."
          
     GROUP ciscoDs1TotalMIBGroup
     DESCRIPTION
         "Implementation of this group is mandatory for
         a device which is able to measure the total
         statistics."
          
     GROUP ciscoDs1StatsMIBGroup
     DESCRIPTION
         "Implementation of this group is optional."

     GROUP ciscoDs1FarEndStatsMIBGroup
     DESCRIPTION
         "Implementation of this is mandatory for the
         systems supporting far end statistics."

     GROUP ciscoDs1BulkConfGroup
     DESCRIPTION
         "Implementation of this is mandatory for the
          systems supporting bulk provisioning."

     GROUP ciscoDs1CallGroup
     DESCRIPTION
         "Implementation of this is mandatory for the
          systems supporting call on DS1/E1 interface."

    GROUP cds1NEOptionalNotificationsGroup
    DESCRIPTION
        "Implementation of this group is optional."
          
     ::= { ciscoDs1MIBCompliances 4 }

-- units of conformance

ciscoDs1ConfMIBGroup  OBJECT-GROUP
    OBJECTS {
             cds1LineType,
             cds1LoopbackCodeDetection
    }
    STATUS current
    DESCRIPTION
        "Collection of DS1/E1 interface related 
         configuration parameters."
    ::= { ciscoDs1MIBGroups 1}

ciscoDs1CurrentMIBGroup  OBJECT-GROUP
    OBJECTS {
             cds1CurrentLSESs,
             cds1CurrentPSASs
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing statistics
        information for current 15 minute."
    ::= { ciscoDs1MIBGroups 2 }


ciscoDs1IntervalMIBGroup  OBJECT-GROUP
    OBJECTS {
             cds1IntervalLSESs,
             cds1IntervalPSASs
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing statistics
        information for each DS1 interface over the
        previous 24 hour of operation."
    ::= { ciscoDs1MIBGroups 3 }

ciscoDs1TotalMIBGroup  OBJECT-GROUP
    OBJECTS {
             cds1TotalLSESs,
             cds1TotalPSASs
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing statistics
        information applicable to all DS1 interfaces
        for the 24 hour period preceding the current
        interval."
    ::= { ciscoDs1MIBGroups 4 }

ciscoDs1FarEndStatsMIBGroup  OBJECT-GROUP
    OBJECTS {
             cds1FarEndCurrentLOFCs,
             cds1FarEndIntervalLOFCs,
             cds1FarEndTotalLOFCs
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing statistics
        information for the remote end."
    ::= { ciscoDs1MIBGroups 5 }


ciscoDs1AlarmConfigGroup  OBJECT-GROUP
     OBJECTS {
              cds1StatisticalAlarmSeverity,
              cds1StatisticalAlarmState,
              cds1AlarmUpCount,
              cds1AlarmDownCount,
              cds1AlarmThreshold,
              cds1AlarmThresholdActiveGroup
     }
     STATUS current
     DESCRIPTION
         "Statistical alarm configuration group for
         15 Minute thresholds."
     ::= { ciscoDs1MIBGroups 6 }

ciscoDs1Alarm15MinThreshGroup  OBJECT-GROUP
     OBJECTS {
              cds1Current15MinLCVsThreshold,
              cds1Current15MinLESsThreshold,
              cds1Current15MinPCVsThreshold,
              cds1Current15MinSEFSsThreshold,
              cds1Current15MinUASsThreshold,
              cds1Current15MinLSESsThreshold,
              cds1Current15MinSESsThreshold,
              cds1Current15MinBESsThreshold,
              cds1Current15MinDMsThreshold,
              cds1Current15MinESsThreshold,
              cds1Current15MinCSSsThreshold,
              cds1Current15MinPSASsThreshold,
              cds1AlarmThresholdGroupRowStatus
     }
     STATUS deprecated -- replaced by ciscoDs1Alarm15MinThreshGroupRev1
     DESCRIPTION
         "Threshold configuration group for stats collected
         in 15 minute intervals."
     ::= { ciscoDs1MIBGroups 7 }

ciscoDs1Alarm24HrThreshGroup  OBJECT-GROUP
     OBJECTS {
              cds1Current24HrLCVsThreshold,
              cds1Current24HrLESsThreshold,
              cds1Current24HrPCVsThreshold,
              cds1Current24HrSEFSsThreshold,
              cds1Current24HrUASsThreshold,
              cds1Current24HrLSESsThreshold,
              cds1Current24HrSESsThreshold,
              cds1Current24HrBESsThreshold,
              cds1Current24HrCSSsThreshold,
              cds1Current24HrDMsThreshold,
              cds1Current24HrESsThreshold,
              cds1Current24HrPSASsThreshold,
              cds1AlarmThresholdGroupRowStatus
     }
     STATUS deprecated -- replaced by ciscoDs1Alarm24HrThreshGroupRev1
     DESCRIPTION
         "Threshold configuration group for stats collected
         in 24 minute intervals."
     ::= { ciscoDs1MIBGroups 8 }

ciscoDs1Current24HrMIBGroup  OBJECT-GROUP
     OBJECTS {
              cds1Current24HrESs,
              cds1Current24HrSESs,
              cds1Current24HrSEFSs,
              cds1Current24HrUASs,
              cds1Current24HrCSSs,
              cds1Current24HrPCVs,
              cds1Current24HrLESs,
              cds1Current24HrBESs,
              cds1Current24HrDMs,
              cds1Current24HrLCVs
     }
     STATUS current
     DESCRIPTION
          "Group of current 24 hour performance counters."
     ::= { ciscoDs1MIBGroups 9 }


ciscoDs1Previous24HrMIBGroup  OBJECT-GROUP
     OBJECTS {
              cds1Previous24HrESs,
              cds1Previous24HrSESs,
              cds1Previous24HrSEFSs,
              cds1Previous24HrUASs,
              cds1Previous24HrCSSs,
              cds1Previous24HrPCVs,
              cds1Previous24HrLESs,
              cds1Previous24HrBESs,
              cds1Previous24HrDMs,
              cds1Previous24HrLCVs,
              cds1Previous24HrLSESs
     }
     STATUS current
     DESCRIPTION
          "A collection of objects providing statistics
          for previous 24 hour."
     ::= { ciscoDs1MIBGroups 10 }

ciscoDs1StatsMIBGroup  OBJECT-GROUP
     OBJECTS {
              cds1LOSCounts,
              cds1OOFCounts,
              cds1RAICounts,
              cds1FECounts
     }
     STATUS current
     DESCRIPTION
          "A collection of objects related to DS1 statistics."
     ::= { ciscoDs1MIBGroups 11 }


cds1NEOptionalNotificationsGroup NOTIFICATION-GROUP
      NOTIFICATIONS { cds1StatThresholdAlarm }
      STATUS    current
      DESCRIPTION
           "A collection of notifications that may be
            implemented on DS1/E1 interfaces."
      ::= { ciscoDs1MIBGroups 12 }

ciscoDs1BulkConfGroup  OBJECT-GROUP
    OBJECTS {
             cds1Repetition,
             cds1RepetitionOwner,
             cds1RepetitionResult
    }
    STATUS current
    DESCRIPTION
        "Bulk provisioning parameters for DS1/E1 interface."
    ::= { ciscoDs1MIBGroups 13 }

ciscoDs1AlarmThreshGroup  OBJECT-GROUP
     OBJECTS {
               cds1AlarmThresholdGroupRowStatus
     }
     STATUS current
     DESCRIPTION
         "The common group for DS1 alarm threshold configuration.

          Note:
            If this group is supported, at least one of 
            ciscoDs1Alarm15MinThreshGroupRev1
            and ciscoDs1Alarm24HrThreshGroupRev1
            should be supported."
     ::= { ciscoDs1MIBGroups 14 }

ciscoDs1Alarm15MinThreshGroupRev1  OBJECT-GROUP
     OBJECTS {
              cds1Current15MinLCVsThreshold,
              cds1Current15MinLESsThreshold,
              cds1Current15MinPCVsThreshold,
              cds1Current15MinSEFSsThreshold,
              cds1Current15MinUASsThreshold,
              cds1Current15MinLSESsThreshold,
              cds1Current15MinSESsThreshold,
              cds1Current15MinBESsThreshold,
              cds1Current15MinDMsThreshold,
              cds1Current15MinESsThreshold,
              cds1Current15MinCSSsThreshold,
              cds1Current15MinPSASsThreshold
     }
     STATUS current
     DESCRIPTION
         "Threshold configuration group for stats collected
         in 15 minute intervals."
     ::= { ciscoDs1MIBGroups 15 }

ciscoDs1Alarm24HrThreshGroupRev1  OBJECT-GROUP
     OBJECTS {
              cds1Current24HrLCVsThreshold,
              cds1Current24HrLESsThreshold,
              cds1Current24HrPCVsThreshold,
              cds1Current24HrSEFSsThreshold,
              cds1Current24HrUASsThreshold,
              cds1Current24HrLSESsThreshold,
              cds1Current24HrSESsThreshold,
              cds1Current24HrBESsThreshold,
              cds1Current24HrCSSsThreshold,
              cds1Current24HrDMsThreshold,
              cds1Current24HrESsThreshold,
              cds1Current24HrPSASsThreshold
     }
     STATUS current
     DESCRIPTION
         "Threshold configuration group for stats collected
         in 24 minute intervals."
     ::= { ciscoDs1MIBGroups 16 }

ciscoDs1CallGroup  OBJECT-GROUP
     OBJECTS {
              cds1CallTrunkConditionEnable
     }
     STATUS current
     DESCRIPTION
         "Call related parameters for DS1/E1
          interface."
     ::= { ciscoDs1MIBGroups 17 }

END