| cds1LineType |
.1.3.6.1.4.1.9.9.229.1.1.1.1.1 |
|
This variable indicates the variety of DS1
Line implementing this circuit. The type of
circuit affects the number of bits per second
that the circuit can reasonably carry, as well
as the interpretation of the usage and error
statistics.
The reasons behind adding 'cds1Linetype' object (apart
from 'dsx1LineType' in DS1-MIB.my) for 'line type', with
enums from 'other(1)' to 'dsx2E2(11)' replicated, are
following:
1) Addition of the two new enums (viz. 'dsx1E1Q50' and
'dsx1E1Q50CRC') in the standard DS1-MIB might not take
place in near future; that's why it was decided to
have a new object 'cds1LineType'.
2) A way was needed to be provided to configure 'line type'
from CLI (Command Line Interface) for service modules
supporting line type values from 'dsx1LineType' as well as
'cds1LineType', without having to modify two separate
parameters and at the same time, making sure that CLI
parameter values directly map to the MIB values.
Hence, enums from 'other(1)' to 'dsx2E2(11)' from object
'dsx1LineType' are replicated, and the new enums are added
as 'dsx1E1Q50(20)' and 'dsx1E1Q50CRC(21)'. The gap between
'dsx2E2(11)' and 'dsx1E1Q50(20)' provides a safe margin
in the case of modifications in 'dsx1LineType' in future;
so the CLI can still have the same enums as the standard
MIB.
It is to be noted that objects 'dsx1LineType' and
'cds1LineType' are mutually exclusive. Setting both in a
SET request (with the exception of value 'other(1)')
should result into an 'INCONSISTENT VALUE' error.
In the case of successive 'SET' requests, the value
associated with the latest request should prevail
irrespective of the object ('dsx1LineType' or
'cds1LineType') used.
Following values reflect the corresponding values
in 'dsx1LineType' object in DS1-MIB.
dsx1ESF Extended SuperFrame DS1 (T1.107)
dsx1D4 AT&T D4 format DS1 (T1.107)
dsx1E1 ITU-T Recommendation G.704 (Table 4a)
dsx1E1-CRC ITU-T Recommendation G.704 (Table 4b)
dsxE1-MF G.704 (Table 4a) with TS16
multiframing enabled
dsx1E1-CRC-MF G.704 (Table 4b) with TS16
multiframing enabled
dsx1Unframed DS1 with No Framing
dsx1E1Unframed E1 with No Framing (G.703)
dsx1DS2M12 DS2 frame format (T1.107)
dsx1E2 E2 frame format (G.704)
The recommended value for 'dsx1LineType' object is
'other'(1) for following values.
dsx1E1Q50(20) ITU-T G.704 with TS16 bits 5,7,8 set to
101. In all the other cases TS16 bits 5,7,8
set to 111.(Table 14)
dsx1E1Q50CRC(21): dsx1E1Q50 with CRC.
For clarification, the capacity for each E1 type
is as listed below:
dsx1E1Unframed - E1, no framing = 32 x 64k = 2048k
dsx1E1 or dsx1E1CRC - E1, with framing,
no signalling = 31 x 64k = 1984k
dsx1E1MF or dsx1E1CRCMF - E1, with framing,
signalling = 30 x 64k = 1920k
For further information See ITU-T Recomm G.704
|
| cds1LoopbackCodeDetection |
.1.3.6.1.4.1.9.9.229.1.1.1.1.2 |
|
This object is used to enable or disable the detection
of far end loop back requests (inband or
out-of-band (ESF)).
The loopback detection is enabled by setting this object
to 'true' and loopback detection is disabled by setting
this object to 'false'. The value of this object does not
have any impact on the way dsx1LoopbackConfig object is
implemented.
|
| cds1Repetition |
.1.3.6.1.4.1.9.9.229.1.1.1.1.3 |
|
This object is used to repeatedly apply the writable objects
of dsx1ConfigTable and cds1ConfigTable specified in the same
SNMP PDU starting from the row indicated by the index of the
instance for the number of rows specified in this object.
The order of operation is iterated through the logical
order of the DS1 lines. Whether the iteration will be applied
across the physical boundary or not is depended on the
system implmentation.
The GET operation on this object will always return 1.
|
| cds1RepetitionOwner |
.1.3.6.1.4.1.9.9.229.1.1.1.1.4 |
|
This object is used for error checking of the operation
specified in cds1Repetition.
The value of this object is set by the SNMP manager
for its own identifier at the same time as issuing the bulk
operation by setting cds1Repetition.
Later on, the SNMP manager should check the value of this
object, if it is the same with the SNMP manager name,
then the value of cds1RepetitionResult indicates the
result of bulk operation initiated by this SNMP manager.
|
| cds1RepetitionResult |
.1.3.6.1.4.1.9.9.229.1.1.1.1.5 |
|
This object is used for error checking of the operation
specified in cds1Repetition.
This object indicates the result of bulk configuraton
initiated by the SNMP manager specified in the value of
cds1RepetitionOwner.
|
| cds1CallTrunkConditionEnable |
.1.3.6.1.4.1.9.9.229.1.1.2.1.1 |
|
This object specifies whether trunk-condition is enabled.
The value 'true' means trunk-condition enable and the
value 'false' means trunk-condition disable.
If this object is set to 'true', gateway will apply
trunk conditioning on the DS0's of this DS1 interface
that are in alarm.
Trunk Conditioning - gateway will transmit idle code pattern
for the first 2.5 secs and then transmit seized code, both
idle code and seized code are specified by the 'ds0IdleCode'
and 'ds0SeizedCode' MIB objects in the CISCO-CAS-IF-EXT-MIB.
This object is applicable for trunking applications only.
|
| cds1CurrentLSESs |
.1.3.6.1.4.1.9.9.229.1.3.1.1.1 |
|
The number of LSES (Line Severely Errored Seconds)
encountered by the interface.
|
| cds1CurrentPSASs |
.1.3.6.1.4.1.9.9.229.1.3.1.1.2 |
|
The number of Path SEF/AIS (PSAS) encountered
by the ds1 interface.
|
| cds1IntervalLSESs |
.1.3.6.1.4.1.9.9.229.1.3.2.1.1 |
|
The number of LSES (Line Severely Errored Seconds)
encountered by the interface.
|
| cds1IntervalPSASs |
.1.3.6.1.4.1.9.9.229.1.3.2.1.2 |
|
The number of PSAS encountered by the interface.
|
| cds1TotalLSESs |
.1.3.6.1.4.1.9.9.229.1.3.3.1.1 |
|
The sum of Line Severely Errored Seconds (LSES)
encountered by a DS1 interface in the previous
96 fifteen minutes intervals.
|
| cds1TotalPSASs |
.1.3.6.1.4.1.9.9.229.1.3.3.1.2 |
|
The sum of Path SEF/AIS (PSAS) encountered by a
DS1 interface in the previous 96 fifteen minutes
intervals
|
| cds1FarEndCurrentLOFCs |
.1.3.6.1.4.1.9.9.229.1.3.4.1.1 |
|
The number of Loss Of Frame Counts in the current
15 minute interval.
|
| cds1FarEndIntervalLOFCs |
.1.3.6.1.4.1.9.9.229.1.3.5.1.1 |
|
The number of Loss Of Frame Counts encountered
by the interface.
|
| cds1FarEndTotalLOFCs |
.1.3.6.1.4.1.9.9.229.1.3.6.1.1 |
|
The number of Loss Of Frame Counts encountered
by the interface in the previous 96 fifteen minutes
interval.
|
| cds1AlarmThresholdGroupIndex |
.1.3.6.1.4.1.9.9.229.1.2.1.1.1 |
|
An unique value identifying an entry in
cds1AlarmThresholdGroupTable.
|
| cds1Current15MinBESsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.2 |
|
This object identifies 15 minute threshold for BES.
|
| cds1Current24HrBESsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.3 |
|
This object identifies 24 hour threshold for BES.
|
| cds1Current15MinCSSsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.4 |
|
This object identifies 15 minute threshold for CSS.
|
| cds1Current24HrCSSsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.5 |
|
This object identifies 24 hour threshold for CSS.
|
| cds1Current15MinDMsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.6 |
|
This object identifies 15 minute threshold for DM.
|
| cds1Current24HrDMsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.7 |
|
This object identifies 24 hour threshold for DM.
|
| cds1Current15MinESsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.8 |
|
This object identifies 15 minute threshold for ES.
|
| cds1Current24HrESsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.9 |
|
This object identifies 24 hour threshold for ES.
|
| cds1Current15MinLCVsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.10 |
|
This object identifies 15 minute threshold for LCV.
|
| cds1Current24HrLCVsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.11 |
|
This object identifies 24 hour threshold for LCV.
|
| cds1Current15MinLESsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.12 |
|
This object identifies 15 minute threshold for LES.
|
| cds1Current24HrLESsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.13 |
|
This object identifies 24 hour threshold for LES.
|
| cds1Current15MinLSESsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.14 |
|
This object identifies 15 minute threshold for LSES.
|
| cds1Current24HrLSESsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.15 |
|
This object identifies 24 hour threshold for LSES.
|
| cds1Current15MinPCVsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.16 |
|
This object identifies 15 minute threshold for PCV.
|
| cds1Current24HrPCVsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.17 |
|
This object identifies 24 hour threshold for PCV.
|
| cds1Current15MinPSASsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.18 |
|
This object identifies 15 minute threshold for PSAS.
|
| cds1Current24HrPSASsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.19 |
|
This object identifies 24 hour threshold for PSAS.
|
| cds1Current15MinSESsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.20 |
|
This object identifies 15 minute threshold for SES.
|
| cds1Current24HrSESsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.21 |
|
This object identifies 24 hour threshold for SES.
|
| cds1Current15MinSEFSsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.22 |
|
This object identifies 15 minute threshold for SEFS.
|
| cds1Current24HrSEFSsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.23 |
|
This object identifies 24 hour threshold for SEFS.
|
| cds1Current15MinUASsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.24 |
|
This object identifies 15 minute threshold for UAS.
|
| cds1Current24HrUASsThreshold |
.1.3.6.1.4.1.9.9.229.1.2.1.1.25 |
|
This object identifies 24 hour threshold for UAS.
|
| cds1AlarmThresholdGroupRowStatus |
.1.3.6.1.4.1.9.9.229.1.2.1.1.26 |
|
The status of this conceptual row. This object is
used for creating, modifying and deleting entries
from cds1AlarmThresholdGroupTable.
To create a row in this table, a manager must set
this object to 'createAndGo(4)'.
An entry can be deleted by setting this object to
destroy'(6)'.
An entry in this table may be modified after
creation.
The active threshold configuration is indicated
by the object 'cds1AlarmThresholdActiveGroup'.
|
| cds1StatisticalAlarmSeverity |
.1.3.6.1.4.1.9.9.229.1.2.2.1.1 |
|
This variable is used to setup the severity of any of the
Statistical alarms. So when a Statistical Counter exceeds its
specified threshold, the system will send the alarm with
appropriate severity. A value of none(3) indicates that no
alarm will be raised.
|
| cds1StatisticalAlarmState |
.1.3.6.1.4.1.9.9.229.1.2.2.1.2 |
|
This is a bitmap of the DS1 Line Statistical alarms.
A clear bitmap (i.e. no bit is set) will indicate that
no alarms are present.
The values of individual bits mean:
cds1BES15Min
BES current 15 minute threshold exceeded
cds1BES24Hr
BES 24 hour threshold exceeded
cds1CSS15Min
CSS current 15 minute threshold exceeded
cds1CSS24Hr
CSS 24 hour threshold exceeded
cds1DM15Min
DM current 15 minute threshold exceeded
cds1DM24Hr
DM 24 hour threshold exceeded
cds1ES15Min
ES current 15 minute threshold exceeded
cds1ES24Hr
ES 24 hour threshold exceeded
cds1PCV15Min
PCV current 15 minute threshold exceeded
cds1PCV24Hr
PCV 24 hour threshold exceeded
cds1LCV15Min
LCV current 15 minute threshold exceeded
cds1LCV24Hr
LCV 24 hour threshold exceeded
cds1LES15Min
LES current 15 minute threshold exceeded
cds1LES24Hr
LES 24 hour threshold exceeded
cds1LSES15Min
LSES current 15 minute threshold exceeded
cds1LSES24Hr
LSES 24 hour threshold exceeded
cds1PSAS15Min
PSAS current 15 minute threshold exceeded
cds1PSAS24Hr
PSAS 24 Hour threshold exceeded
cds1SES15Min
SES current 15 minute threshold exceeded
cds1SES24Hr
SES 24 hour threshold exceeded
cds1SEFS15Min
SEFS current 15 minute threshold exceeded
cds1SEFS24Hr
SEFS 24 hour threshold exceeded
cds1UAS15Min
UAS current 15 minute threshold exceeded
cds1UAS24Hr
UAS 24 hour threshold exceeded
|
| cds1AlarmUpCount |
.1.3.6.1.4.1.9.9.229.1.2.2.1.3 |
|
This parameter specifies the increment to the Near
End alarm integration counters. The local alarms are
LOS and LOF. The integration counter is incremented by
this value every 100 ms while the alarm persists. When
the integration counter exceeds 'cds1AlarmThreshold'
an Alarm of the severity specified for the particular
alarm is declared.
The integration counter is an internal counter specific
to the implementation and dictates the slope of
integration.
|
| cds1AlarmDownCount |
.1.3.6.1.4.1.9.9.229.1.2.2.1.4 |
|
This parameter specifies the decrement to the Near
End alarm integration counters. The alarms are LOS
and LOF. The integration counter is decremented by
this value every 100 ms while no alarm persists. The
counter does not decrement below zero. When the
integration counter reaches zero any Alarm previously
declared is removed.
|
| cds1AlarmThreshold |
.1.3.6.1.4.1.9.9.229.1.2.2.1.5 |
|
The value set in this object determines the value that
the alarm integration counter must reach for an near end
alarm to be declared. If the up count is 6, and the
threshold 150, an Alarm is integrated in 2.5 seconds.
If the down count is 1, then alarm will be cleared in
15 seconds.
|
| cds1AlarmThresholdActiveGroup |
.1.3.6.1.4.1.9.9.229.1.2.2.1.6 |
|
The value of this object identifies the row in the
cds1AlarmThresholdGroupTable which contains the
threshold values for different statistics, and
is currently active.
|
| cds1Current24HrESs |
.1.3.6.1.4.1.9.9.229.1.3.7.1.1 |
|
Number of ESs encountered in current 24 hour interval.
|
| cds1Current24HrSESs |
.1.3.6.1.4.1.9.9.229.1.3.7.1.2 |
|
Number of SESs encountered in current 24 hour interval.
|
| cds1Current24HrSEFSs |
.1.3.6.1.4.1.9.9.229.1.3.7.1.3 |
|
Number of SEFSs encountered in current 24 hour interval.
|
| cds1Current24HrUASs |
.1.3.6.1.4.1.9.9.229.1.3.7.1.4 |
|
Number of UASs encountered in current 24 hour interval.
|
| cds1Current24HrCSSs |
.1.3.6.1.4.1.9.9.229.1.3.7.1.5 |
|
Number of CSSs encountered in current 24 hour interval.
|
| cds1Current24HrPCVs |
.1.3.6.1.4.1.9.9.229.1.3.7.1.6 |
|
Number of PCVs encountered in current 24 hour interval.
|
| cds1Current24HrLESs |
.1.3.6.1.4.1.9.9.229.1.3.7.1.7 |
|
Number of LESs encountered in current 24 hour interval.
|
| cds1Current24HrBESs |
.1.3.6.1.4.1.9.9.229.1.3.7.1.8 |
|
Number of BESs encountered in current 24 hour interval.
|
| cds1Current24HrDMs |
.1.3.6.1.4.1.9.9.229.1.3.7.1.9 |
|
Number of DMs encountered in current 24 hour interval.
|
| cds1Current24HrLCVs |
.1.3.6.1.4.1.9.9.229.1.3.7.1.10 |
|
Number of LCVs encountered in current 24 hour interval.
|
| cds1Previous24HrESs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.1 |
|
Number of ESs encountered in previous 24 hour interval.
|
| cds1Previous24HrSESs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.2 |
|
Number of SESs encountered in previous 24 hour interval.
|
| cds1Previous24HrSEFSs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.3 |
|
Number of SEFSs encountered in previous 24 hour interval.
|
| cds1Previous24HrUASs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.4 |
|
Number of UASs encountered in previous 24 hour interval.
|
| cds1Previous24HrCSSs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.5 |
|
Number of CSSs encountered in previous 24 hour interval.
|
| cds1Previous24HrPCVs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.6 |
|
Number of PCVs encountered in previous 24 hour interval.
|
| cds1Previous24HrLESs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.7 |
|
Number of LESs encountered in previous 24 hour interval.
|
| cds1Previous24HrBESs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.8 |
|
Number of BESs encountered in previous 24 hour interval.
|
| cds1Previous24HrDMs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.9 |
|
Number of DMs encountered in previous 24 hour interval.
|
| cds1Previous24HrLCVs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.10 |
|
Number of LCVs encountered in previous 24 hour interval.
|
| cds1Previous24HrLSESs |
.1.3.6.1.4.1.9.9.229.1.3.8.1.11 |
|
Number of LSESs encountered in previous 24 hour interval.
|
| cds1LOSCounts |
.1.3.6.1.4.1.9.9.229.1.3.9.1.1 |
|
The number of times the Loss Of Signal defect was detected
with or without integrating to LOS alarm.
|
| cds1OOFCounts |
.1.3.6.1.4.1.9.9.229.1.3.9.1.2 |
|
The number of times the Out of Frame (OOF) was detected
with or without integrating to OOF alarm.
|
| cds1RAICounts |
.1.3.6.1.4.1.9.9.229.1.3.9.1.3 |
|
The number of times Yellow Alarms was detected
with or without integrating to RAI alarm.
|
| cds1FECounts |
.1.3.6.1.4.1.9.9.229.1.3.9.1.4 |
|
The number of Framing Pattern Errors encountered
by the DS1 interface.
|
