CISCO-DSL-PROVISION-MIB device MIB details by Cisco
CISCO-DSL-PROVISION-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-DSL-PROVISION-MIB.
| Vendor: | Cisco |
|---|---|
| Mib: | CISCO-DSL-PROVISION-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- CISCO-DSL-PROVISION-MIB.my: Cisco DSL Provision MIB -- -- July 1998, Junming Gao -- -- Copyright (c) 1998, 1999, 2000 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- CISCO-DSL-PROVISION-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, IpAddress FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue FROM SNMPv2-TC ifIndex, InterfaceIndexOrZero FROM IF-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF Unsigned32 FROM CISCO-TC ciscoExperiment FROM CISCO-SMI; ciscoDslProvisionMIB MODULE-IDENTITY LAST-UPDATED "990618000000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-dsl@cisco.com" DESCRIPTION "Cisco DSL (Digital Subscriber Line) Provision MIB Module. It is used to create subscriber PPP over ATM sessions and related tasks." ::= { ciscoExperiment 30 } ciscoDslProvMIBObjects OBJECT IDENTIFIER ::= { ciscoDslProvisionMIB 1 } cdslNrpSlot OBJECT IDENTIFIER ::= { ciscoDslProvMIBObjects 1 } cdslVirtualTemplate OBJECT IDENTIFIER ::= { ciscoDslProvMIBObjects 2 } cdslLocalIpAddrPool OBJECT IDENTIFIER ::= { ciscoDslProvMIBObjects 3 } cdslAtmPvc OBJECT IDENTIFIER ::= { ciscoDslProvMIBObjects 4 } cdslVcClass OBJECT IDENTIFIER ::= { ciscoDslProvMIBObjects 5 } -- DSL Config Information -- NRP (Node Routing Processor) IP Address Information cdslMaxNrps OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of the node routing processors (NRP) allowed in the system." ::= { cdslNrpSlot 1 } cdslNrpNumber OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of NRPs that are present in this system." ::= { cdslNrpSlot 2 } cdslNrpIpAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF CdslNrpIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table reflects the IP addresses of each NRP in the system." ::= { cdslNrpSlot 3 } cdslNrpIpAddressEntry OBJECT-TYPE SYNTAX CdslNrpIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "These entries are used to store the IP Addresses of NRP cards that are inserted in the indexed slot. The IP addresses are used to access these cards." INDEX { cdslNrpSlotIndex } ::= { cdslNrpIpAddressTable 1 } CdslNrpIpAddressEntry ::= SEQUENCE { cdslNrpSlotIndex Integer32, cdslNrpIpAddress IpAddress } cdslNrpSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object specifies the identifier of a slot containing a NRP." ::= { cdslNrpIpAddressEntry 1 } cdslNrpIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the IP addresses associated with the NRP contained in the slot identified by cdslNrpSlotIndex." ::= { cdslNrpIpAddressEntry 2 } -- Virtual Template Interface Information cdslVirtualTemplateNumberTable OBJECT-TYPE SYNTAX SEQUENCE OF CdslVirtualTemplateNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table reflects the number of virtual template that are presently set up in each NRP. A virtual template interface is a logical entity a configuration for a serial-interface but not tied to a physical interface - thatcan be applied dynamically as needed." ::= { cdslVirtualTemplate 1 } cdslVirtualTemplateNumberEntry OBJECT-TYPE SYNTAX CdslVirtualTemplateNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are read only." INDEX { cdslNrpSlotIndex } ::= { cdslVirtualTemplateNumberTable 1 } CdslVirtualTemplateNumberEntry ::= SEQUENCE { cdslMaxVirtualTemplates Unsigned32, cdslVirtualTemplates Gauge32 } cdslMaxVirtualTemplates OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the maximum number of virtual templates allowed in one single NRP." ::= { cdslVirtualTemplateNumberEntry 1 } cdslVirtualTemplates OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of virtual templates presently set up in each NRP identified by cdslNrpSlotIndex." ::= { cdslVirtualTemplateNumberEntry 2 } -- Virtual Template Table cdslVirtualTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF CdslVirtualTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes the virtual templates in the NRP identified by cNrpSlotIndex. Though a virtual template is often called a virtual template interface, it is not reflected in the ifTable." ::= { cdslVirtualTemplate 2 } cdslVirtualTemplateEntry OBJECT-TYPE SYNTAX CdslVirtualTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User may create a new entry or delete an existing entry. Entries may be created without explicitly setting cdslVTRowStatus. While the row status is 'active', objects having read-create access can be changed." INDEX { cdslNrpSlotIndex, cdslVTIndex } ::= { cdslVirtualTemplateTable 1 } CdslVirtualTemplateEntry ::= SEQUENCE { cdslVTIndex Integer32, cdslVTIpAddressMethod INTEGER, cdslVTIpAddress IpAddress, cdslVTIpAddressMask IpAddress, cdslVTIpIfIndex InterfaceIndexOrZero, cdslVTPeerIpAddressMethod INTEGER, cdslVTPeerIpAddrPool DisplayString, cdslVTPppAuthChap Integer32, cdslVTPppAuthMSChap Integer32, cdslVTPppAuthPap Integer32, cdslVTPppChapHost DisplayString, cdslVTPppChapPassword DisplayString, cdslVTPppChapEncrypType TruthValue, cdslVTPppChapRefuse INTEGER, cdslVTPppChapWaitPeer TruthValue, cdslVTPppPapUserName DisplayString, cdslVTPppPapPassword DisplayString, cdslVTPppPapEncrypType TruthValue, cdslVTPppUseTacacs INTEGER, cdslVTRowStatus RowStatus } cdslVTIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents an arbitrary index used to identify the virtual template entry." ::= { cdslVirtualTemplateEntry 1 } cdslVTIpAddressMethod OBJECT-TYPE SYNTAX INTEGER { none(0), ipAddress(1), interfaceIp(2), negotiate(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates how an IP address is obtained to be associated with this virtual template. The actual parameters of these methods are indicated by the objects defined after. none -- means no IP address associated. ipAddress -- means an explicit IP address and mask. interfaceIp -- uses the IP address of an interface if it has one. negotiate -- obtains IP address from a pre-configured DHCP server. In the set operation, only the parameter corresponding to this object is considered. All other parameters are ignored and forgotten." DEFVAL { none } ::= { cdslVirtualTemplateEntry 2 } cdslVTIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address associated with this virtual template entry. This object is only valid when cdslVTIpAddressMethod is 'ipAddress'. To set the value correctly, this object shall be set in the same packet as cdslVTIpAddressMethod." DEFVAL { 0 } ::= { cdslVirtualTemplateEntry 3 } cdslVTIpAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address mask. This object is only valid when cdslVTIpAddressMethod is 'ipAddress'. To set the value correctly, this object shall be set in the same packet as cdslVTIpAddressMethod." DEFVAL { 'ffffffff'h } ::= { cdslVirtualTemplateEntry 4 } cdslVTIpIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the ifIndex of the interface, whose IP address will be used for the virtual template entry. Any interface with an IP address in the routing processor can be selected. This object is only valid when cdslVTIpAddressMethod is 'interfaceIp'. To set the value correctly, this object shall be set in the same packet as cdslVTIpAddressMethod." DEFVAL { 0 } ::= { cdslVirtualTemplateEntry 5 } cdslVTPeerIpAddressMethod OBJECT-TYPE SYNTAX INTEGER { none(0), negotiate(1), ipAddressPool(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates how an IP address is obtained when a peer requesting one. The actual parameters of these methods are indicated by the objects defined after. none -- means no IP address associated. negotiate -- obtains IP address from a pre-configured DHCP server. ipAddressPool -- obtains IP address from an ip address pool specified by cdslVTPeerIpAddrPool to be defined. In the set operation, only the parameter corresponding to the value of this object is considered. All other parameters are ignored and forgotten." DEFVAL { none } ::= { cdslVirtualTemplateEntry 6 } cdslVTPeerIpAddrPool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify peer default local IP address pool name. This object is only valid when cdslVTPeerIpAddressMethod is 'ipAddressPool'. To set the value correctly, this object shall be set in the same packet as cdslVTPeerIpAddressMethod. If set this object to a pool name that does not correspond to any entry in the cdslLocalIpAddrPoolTable, then the global IP address mechanism shall be applied. So to use the global IP address mechanism, one should set this object to a non-existent cdslLocalIpAddrPoolName or an empty string." DEFVAL { "" } ::= { cdslVirtualTemplateEntry 7 } cdslVTPppAuthChap OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify to use Challenge Handshake Authentication Protocol (CHAP) authentication method and the order it is used. The value zero indicates that CHAP is not used. See the description of object cdslVTPppAuthPap for the meaning of non-zero value." DEFVAL { 0 } ::= { cdslVirtualTemplateEntry 8 } cdslVTPppAuthMSChap OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the use of Microsoft's CHAP (MSCHAP) authentication method and the order it is used. The value zero indicates that MSCHAP is not used. See the description of object cdslVTPppAuthPap for the meaning of non-zero value." DEFVAL { 0 } ::= { cdslVirtualTemplateEntry 9 } cdslVTPppAuthPap OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether to use Password Authentication Protocol (PAP) authentication method and the order it is used. This object is one of multiple objects used to specify authentication methods. The other authentication method objects are cdslVTPppAuthChap and cdslVTPppAuthMSChap. A non-zero value for any of these authentication method objects indicates that its associated authentication method is to be employed. The value of these objects indicates the order in which their respective methods should be applied to the process of authenticating users. The lowest non-zero valued authentication method object is used first. If it fails, the second lowest is applied. If all methods fail, the user is rejected. If multiple objects are set to the same value, then the order of the corresponding methods will be adjusted in the order of CHAP, MSCHAP and PAP. Each time one of these auth method value is set, all the auth method object values will be re-assigned to reflect the order change and the values will be in an incremental order started from one. So the return value(s) of a snmpget request for these objects may be different from what they are set. However the order is preserved." DEFVAL { 0 } ::= { cdslVirtualTemplateEntry 10 } cdslVTPppChapHost OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the PPP CHAP host name." DEFVAL { "" } ::= { cdslVirtualTemplateEntry 11 } cdslVTPppChapPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the PPP CHAP password." DEFVAL { "" } ::= { cdslVirtualTemplateEntry 12 } cdslVTPppChapEncrypType OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether to encrypt the PPP CHAP password. Only effective when cdslVTPppChapPassword is non-empty." DEFVAL { false } ::= { cdslVirtualTemplateEntry 13 } cdslVTPppChapRefuse OBJECT-TYPE SYNTAX INTEGER { no(1), refuse(2), refuseCallinOnly(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to refuse CHAP authentication from peers requesting it. To disable this function set the value to no. RefuseCallinOnly indicating the system to refuse to answer CHAP authentication challenges received from the peer, but will still require the peer to answer any CHAP challenges this system sends. " DEFVAL { no } ::= { cdslVirtualTemplateEntry 14 } cdslVTPppChapWaitPeer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify that the system will not authenticate to a peer requesting CHAP authentication until after the peer has authenticated to this system. To disable this function, set this object to 'false'. That is the system will handle the peer authentication requesting even if a peer has not authenticate itself yet." DEFVAL { true } ::= { cdslVirtualTemplateEntry 15 } cdslVTPppPapUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the PPP PAP user name that will be sent to a peer device. Please refer to the description of cdslVTPppPassword to see the interaction." DEFVAL { "" } ::= { cdslVirtualTemplateEntry 16 } cdslVTPppPapPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the PPP PAP authentication password. The system only utilizes the user name and password when both cdslVTPppUserName and cdslVTPppPassword are non-empty strings. To enforce this the following mechanism is applied. When both are empty strings, set any single one into non-empty string would automatically set the other into the same string. When set any into empty string, the other object would be set to empty string too automatically." DEFVAL { "" } ::= { cdslVirtualTemplateEntry 17 } cdslVTPppPapEncrypType OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether to encrypt the PAP password. Only effective when cdslVTPppPapPassword is non-empty." DEFVAL { false } ::= { cdslVirtualTemplateEntry 18 } cdslVTPppUseTacacs OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2), singleLine(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether to enable TACACS for PPP authentication. SingleLine means yes and plus to accept username and password in the username field that is in single line." DEFVAL { no } ::= { cdslVirtualTemplateEntry 19 } cdslVTRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or modify or delete an existing row in this table." DEFVAL { active } ::= { cdslVirtualTemplateEntry 20 } -- Local IP Address Pool cdslLocalIpAddrPoolNumberTable OBJECT-TYPE SYNTAX SEQUENCE OF CdslLocalIpAddrPoolNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indicates the number of IP address pools that are presently set up in each NRP." ::= { cdslLocalIpAddrPool 1 } cdslLocalIpAddrPoolNumberEntry OBJECT-TYPE SYNTAX CdslLocalIpAddrPoolNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are read only." INDEX { cdslNrpSlotIndex } ::= { cdslLocalIpAddrPoolNumberTable 1 } CdslLocalIpAddrPoolNumberEntry ::= SEQUENCE { cdslMaxLocalIpAddrPools Unsigned32, cdslLocalIpAddrPools Gauge32 } cdslMaxLocalIpAddrPools OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of local IP address pools allowed in a NRP." ::= { cdslLocalIpAddrPoolNumberEntry 1 } cdslLocalIpAddrPools OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local IP address pools presently set up." ::= { cdslLocalIpAddrPoolNumberEntry 2 } -- Local IP Address Pool Table cdslLocalIpAddrPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF CdslLocalIpAddrPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the IP local address pool. An IP address pool may have a single entry in the table. The ranges of a pool are represented in the cdslLocalIPAddrRangeTable." ::= { cdslLocalIpAddrPool 2 } cdslLocalIpAddrPoolEntry OBJECT-TYPE SYNTAX CdslLocalIpAddrPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This list contains IP pool entry. The entry is read-only. The creation or the deletion of an entry will be a by-product of the entry in the cdslLocalIPAddrRangeTable. When an entry is created and activated in that table, an entry in this table will come into existance if it is not already so. When an entry is deleted in that table, if there is no other entry existing in that table with the same cdslNrpSlotIndex and cdslLocalIpAddrPoolName, the netry in this table with the same indices will diappear from the table." INDEX { cdslNrpSlotIndex, IMPLIED cdslLocalIpAddrPoolName } ::= { cdslLocalIpAddrPoolTable 1 } CdslLocalIpAddrPoolEntry ::= SEQUENCE { cdslLocalIpAddrPoolName DisplayString, cdslLocalIpAddrPoolFreeAddresses Unsigned32, cdslLocalIpAddrPoolInUseAddresses Unsigned32 } cdslLocalIpAddrPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique and non-empty string for the pool. The name can not be modified once created." ::= { cdslLocalIpAddrPoolEntry 1 } cdslLocalIpAddrPoolFreeAddresses OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP addresses still available for use in the pool. Please notice that the number is for the whole pool, not for the individual range." ::= { cdslLocalIpAddrPoolEntry 2 } cdslLocalIpAddrPoolInUseAddresses OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of addresses currently in use in the pool. Please notice that the number is for the whole pool, not for the individual range." ::= { cdslLocalIpAddrPoolEntry 3 } -- Local IP Address Pool Range Table cdslLocalIpAddrRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF CdslLocalIpAddrRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the IP local address pool ranges. An IP address pool may have a single entry or multiple entries in the table, since an IP address pool can have multiple dis-continuous ranges. Each range will have a separate entry in the table." ::= { cdslLocalIpAddrPool 3 } cdslLocalIpAddrRangeEntry OBJECT-TYPE SYNTAX CdslLocalIpAddrRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This list contains IP pool range entry. User may create a new entry or delete an existing entry. When creating an entry, after its activation, an entry in the cdslLocalIpAddrPoolTable will exist if it is not already so. When destroying an entry, if the range is the only range in the pool, the range entry will be destroyed and the pool entry will disappear from the cdslLocalIpAddrPoolTable." INDEX { cdslNrpSlotIndex, cdslLocalIpAddrRangeLowAddr , cdslLocalIpAddrRangeHighAddr , IMPLIED cdslLocalIpAddrPoolName } ::= { cdslLocalIpAddrRangeTable 1 } CdslLocalIpAddrRangeEntry ::= SEQUENCE { cdslLocalIpAddrRangeLowAddr IpAddress, cdslLocalIpAddrRangeHighAddr IpAddress, cdslLocalIpAddrRangeRowStatus RowStatus } cdslLocalIpAddrRangeLowAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The low range of this IP address pool range. This must be lower than the pool's high range." ::= { cdslLocalIpAddrRangeEntry 1 } cdslLocalIpAddrRangeHighAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The high range of this IP address pool range. This must be higher than the pool's low range." ::= { cdslLocalIpAddrRangeEntry 2 } cdslLocalIpAddrRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or delete an existing row in this table." ::= { cdslLocalIpAddrRangeEntry 3 } -- PPP Over ATM PVC Information cdslPppOverAtmPvcNumberTable OBJECT-TYPE SYNTAX SEQUENCE OF CdslPppOverAtmPvcNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table reflects the number of PVCs of PPP encapsulation presently set up in each NRP." ::= { cdslAtmPvc 1 } cdslPppOverAtmPvcNumberEntry OBJECT-TYPE SYNTAX CdslPppOverAtmPvcNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the responding NRP." INDEX { cdslNrpSlotIndex } ::= { cdslPppOverAtmPvcNumberTable 1 } CdslPppOverAtmPvcNumberEntry ::= SEQUENCE { cdslPppOverAtmPvcs Gauge32 } cdslPppOverAtmPvcs OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of atm pvcs that are presently set up with PPP encapsulation. The number of all atm PVCs and the maximum number of PVCs are provided by AToM Mib." ::= { cdslPppOverAtmPvcNumberEntry 1 } -- PPP Over ATM PVC Table cdslAtmPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF CdslAtmPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes configuration parameters for ATM PVCs with PPP encapsulation. The vc-mode ATM PVC management approach is used as the PVC creating method, which greatly simplifies configuration by using of vc-class. The PVCs which were created using atm pvc cli commands can only be read or deleted from snmp. In case of reading, only the values of vpi, vci, sub-interface number, encapsulation, virtual template number and row status are meaningful. When trying to set any object of these PVCs, a GEN_ERROR returns except for the row status object. To indicate a PVC is created with old pvc syntax, the value of cdslAtmPvcClass will be set into '!'." ::= { cdslAtmPvc 2 } cdslAtmPvcEntry OBJECT-TYPE SYNTAX CdslAtmPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IfIndex by which the table is indexed, is the ATM interface index in which the PVC is created. The only object that is allowed to change the value while the row status is 'active' is cdslAtmPvcClass. Please refer to the description of cdslAtmPvcRowStatus for more information." INDEX { cdslNrpSlotIndex, ifIndex, cdslAtmPvcVpi, cdslAtmPvcVci } ::= { cdslAtmPvcTable 1 } CdslAtmPvcEntry ::= SEQUENCE { cdslAtmPvcVpi Integer32, cdslAtmPvcVci Integer32, cdslAtmPvcName DisplayString, cdslAtmPvcSubIfNumber Integer32, cdslAtmPvcClass DisplayString, cdslAtmPvcQosType INTEGER, cdslAtmPvcAbrPCR Unsigned32, cdslAtmPvcAbrMCR Unsigned32, cdslAtmPvcAbrIORIF Unsigned32, cdslAtmPvcAbrIORDF Unsigned32, cdslAtmPvcBroadcast INTEGER, cdslAtmPvcEncapsulation INTEGER, cdslAtmPvcMuxLinkType INTEGER, cdslAtmPvcVirtualTemplate Integer32, cdslAtmPvcILMIManage INTEGER, cdslAtmPvcInarp Unsigned32, cdslAtmPvcOamRetryUpCount Unsigned32, cdslAtmPvcOamRetryDownCount Unsigned32, cdslAtmPvcOamPvcManaged INTEGER, cdslAtmPvcOamPvcLF Unsigned32, cdslAtmPvcProtocolIpBC TruthValue, cdslAtmPvcProtocolIpxBC TruthValue, cdslAtmPvcUbrPCR Unsigned32, cdslAtmPvcUbrPlusPCR Unsigned32, cdslAtmPvcUbrPlusMCR Unsigned32, cdslAtmPvcVbrNrtPCR Unsigned32, cdslAtmPvcVbrNrtSCR Unsigned32, cdslAtmPvcRowStatus RowStatus } cdslAtmPvcVpi OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The virtual path identifier of the PVC. Please note that it is routing processor's VPI number." ::= { cdslAtmPvcEntry 1 } cdslAtmPvcVci OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The virtual channel identifier of the PVC. Please note that it is routing processor's VCI number." ::= { cdslAtmPvcEntry 2 } cdslAtmPvcName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object can be used to identify the PVC. Unique name for each PVC is desired if assigned." DEFVAL { "" } ::= { cdslAtmPvcEntry 3 } cdslAtmPvcSubIfNumber OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ios sub-interface number if this PVC belongs to an atm sub-interface. Once the pvc exists, the value can not be modified. If the PVC is created under the ATM interface level and not a subinterface level, the object shall be zero." DEFVAL { 0 } ::= { cdslAtmPvcEntry 4 } cdslAtmPvcClass OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the vc-class to inherit when the named vc-class exists. If the object is to set into an empty string, the default value 'default-vc-class' will be used. If the 'default-vc-class' class does exist, it will be created and the encapsulation is set to aal5ciscoppp and the virtual template number is set to the largest virtual template number allowed. If the specified virtual template does not exist, it will be created with no specific configuration. If the specified vc-class does not exist, a new vc-class will be created in the same way as the default-vc-class is. If the specified vc-class exists and its encapsulation is not 'aal5mux' or 'aal5ciscoppp', an error will be returned." DEFVAL { "default-vc-class" } ::= { cdslAtmPvcEntry 5 } cdslAtmPvcQosType OBJECT-TYPE SYNTAX INTEGER { ubrDefault(0), cbr(1), ubr(2), ubrPlus(3), vbrRt(4), vbrNrt(5), abr(6), max(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Quality of Service type of this PVC." ::= { cdslAtmPvcEntry 6 } cdslAtmPvcAbrPCR OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Availabe bit rate (Abr) peak cell rate(PCR) of this PVC." ::= { cdslAtmPvcEntry 7 } cdslAtmPvcAbrMCR OBJECT-TYPE SYNTAX Unsigned32 (0..1) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Abr Minimum Guaranteed Cell Rate(MCR) of this PVC." ::= { cdslAtmPvcEntry 8 } cdslAtmPvcAbrIORIF OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Abr inverse of rate increase factor (1/rif) of this PVC." ::= { cdslAtmPvcEntry 9 } cdslAtmPvcAbrIORDF OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Abr inverse of rate decrease factor (1/rdf) of this PVC." ::= { cdslAtmPvcEntry 10 } cdslAtmPvcBroadcast OBJECT-TYPE SYNTAX INTEGER { false (0), true (1), unknown(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether to allow broadcast or not." ::= { cdslAtmPvcEntry 11 } cdslAtmPvcEncapsulation OBJECT-TYPE SYNTAX INTEGER { default (0), aal5snap(1), aal5mux (2), aal5nlpid (3), aal34smds (4), aal5ilmi (5), aal5qsaal (6), aal5ciscoppp (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates encapsulation method of this PVC." ::= { cdslAtmPvcEntry 12 } cdslAtmPvcMuxLinkType OBJECT-TYPE SYNTAX INTEGER { ip (1), ppp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object can be used to This object is used to specify the link type if the encapsulation is aal5mux. 1 -- ip and 2 -- ppp." DEFVAL { ppp } ::= { cdslAtmPvcEntry 13 } cdslAtmPvcVirtualTemplate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The virtual template number configured for the PVC." ::= { cdslAtmPvcEntry 14 } cdslAtmPvcILMIManage OBJECT-TYPE SYNTAX INTEGER { false (0), true (1), unknown(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether to ilmi manage or not." ::= { cdslAtmPvcEntry 15 } cdslAtmPvcInarp OBJECT-TYPE SYNTAX Unsigned32 (1..60) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the InARP Frequency in minutes (Only meaningful in aal5snap encapsulation)." ::= { cdslAtmPvcEntry 16 } cdslAtmPvcOamRetryUpCount OBJECT-TYPE SYNTAX Unsigned32 (1..600) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the OAM retry count before declaring a VC is up." ::= { cdslAtmPvcEntry 17 } cdslAtmPvcOamRetryDownCount OBJECT-TYPE SYNTAX Unsigned32 (1..600) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the OAM retry count before declaring a VC is down." ::= { cdslAtmPvcEntry 18 } cdslAtmPvcOamPvcManaged OBJECT-TYPE SYNTAX INTEGER { false (0), true (1), unknown(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether to enable VC management on OAM in this PVC." ::= { cdslAtmPvcEntry 19 } cdslAtmPvcOamPvcLF OBJECT-TYPE SYNTAX Unsigned32 (0..600) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the OAM loopback frequency(seconds) for this PVC." ::= { cdslAtmPvcEntry 20 } cdslAtmPvcProtocolIpBC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Pseudo-broadcast on the protocol IP inarp connections or not (Only meaningful in aal5snap encapsulation)." ::= { cdslAtmPvcEntry 21 } cdslAtmPvcProtocolIpxBC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether to allow Pseudo-broadcast on the protocol IPX inarp connections or not (Only meaningful in aal5snap encapsulation)." ::= { cdslAtmPvcEntry 22 } cdslAtmPvcUbrPCR OBJECT-TYPE SYNTAX Unsigned32 (1..155000) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Ubr Peak Cell Rate." ::= { cdslAtmPvcEntry 23 } cdslAtmPvcUbrPlusPCR OBJECT-TYPE SYNTAX Unsigned32 (1..155000) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Ubr+ Peak Cell Rate." ::= { cdslAtmPvcEntry 24 } cdslAtmPvcUbrPlusMCR OBJECT-TYPE SYNTAX Unsigned32 (0..1) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Ubr+ Minimum Guaranteed Cell Rate." ::= { cdslAtmPvcEntry 25 } cdslAtmPvcVbrNrtPCR OBJECT-TYPE SYNTAX Unsigned32 (1..155000) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Vbr-Nrt Peak Cell Rate." ::= { cdslAtmPvcEntry 26 } cdslAtmPvcVbrNrtSCR OBJECT-TYPE SYNTAX Unsigned32 (1..1) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Vbr-Nrt Sustainable Cell Rate." ::= { cdslAtmPvcEntry 27 } cdslAtmPvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or modify or delete an existing row in this table. When the row is created, but the minimun set of parameters is not all set, the status is 'notReady'. There is no PVC corresponding to it. The minimum set of parameters required to activate an entry is cdslAtmPvcSubIfNumber." DEFVAL { active } ::= { cdslAtmPvcEntry 28 } -- VC Class Information cdslVcClassNumberTable OBJECT-TYPE SYNTAX SEQUENCE OF CdslVcClassNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table reflects the number of VC classes that are presently set up in each NRP." ::= { cdslVcClass 1 } cdslVcClassNumberEntry OBJECT-TYPE SYNTAX CdslVcClassNumberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are read only." INDEX { cdslNrpSlotIndex } ::= { cdslVcClassNumberTable 1 } CdslVcClassNumberEntry ::= SEQUENCE { cdslMaxVcClasses Unsigned32, cdslVcClasses Gauge32 } cdslMaxVcClasses OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum number of VC classes allowed." ::= { cdslVcClassNumberEntry 1 } cdslVcClasses OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of VC classes presently set in each NRP identified by cdslNrpSlotIndex." ::= { cdslVcClassNumberEntry 2 } -- VC Class Table cdslVcClassTable OBJECT-TYPE SYNTAX SEQUENCE OF CdslVcClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries in this table are vc-classes with at least one parameter configured. In other words, empty classes (with name only) will not be present in this table." ::= { cdslVcClass 2 } cdslVcClassEntry OBJECT-TYPE SYNTAX CdslVcClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VC Class entry is read-create. Each entry represents a VC class." INDEX { cdslNrpSlotIndex, IMPLIED cdslVcClassName } ::= { cdslVcClassTable 1 } CdslVcClassEntry ::= SEQUENCE { cdslVcClassName DisplayString, cdslVcClassType INTEGER, cdslVcClassQosType INTEGER, cdslVcClassAbrPCR Integer32, cdslVcClassAbrMcr Integer32, cdslVcClassAbrIORIF Integer32, cdslVcClassAbrIORDF Integer32, cdslVcClassBroadcast INTEGER, cdslVcClassEncapsulation INTEGER, cdslVcClassMuxLinkType INTEGER, cdslVcClassVirtualTemplate Integer32, cdslVcClassIdleTimeout Integer32, cdslVcClassIdleMTR Integer32, cdslVcClassILMIManage INTEGER, cdslVcClassInarp Integer32, cdslVcClassOamRetryUpCount Integer32, cdslVcClassOamRetryDownCount Integer32, cdslVcClassOamPvcManaged INTEGER, cdslVcClassOamPvcLF Integer32, cdslVcClassOamSvcManaged INTEGER, cdslVcClassOamSvcLF Integer32, cdslVcClassProtocolIpBC TruthValue, cdslVcClassProtocolIpxBC TruthValue, cdslVcClassTransmitPriority Integer32, cdslVcClassUbrPCR Integer32, cdslVcClassUbrInputPCR Integer32, cdslVcClassUbrPlusPCR Integer32, cdslVcClassUbrPlusMCR Integer32, cdslVcClassUbrPlusInputPCR Integer32, cdslVcClassUbrPlusInputMCR Integer32, cdslVcClassVbrNrtPCR Integer32, cdslVcClassVbrNrtSCR Integer32, cdslVcClassVbrNrtInputBP Integer32, cdslVcClassVbrNrtInputPCR Integer32, cdslVcClassVbrNrtInputSCR Integer32, cdslVcClassVbrNrtInputMBS Integer32, cdslVcClassRowStatus RowStatus } cdslVcClassName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to identify the vc class." ::= { cdslVcClassEntry 1 } cdslVcClassType OBJECT-TYPE SYNTAX INTEGER { atm (1), funi(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of the vc class. Atm is for Asynchronous transfer mode and funi for frame user network interface." ::= { cdslVcClassEntry 2 } cdslVcClassQosType OBJECT-TYPE SYNTAX INTEGER { ubrDefault(0), cbr(1), ubr(2), ubrPlus(3), vbrRt(4), vbrNrt(5), abr(6), max(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the QOS type of the vc class." DEFVAL { ubrDefault } ::= { cdslVcClassEntry 3 } cdslVcClassAbrPCR OBJECT-TYPE SYNTAX Integer32 (56..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies Abr Peak Cell Rate." ::= { cdslVcClassEntry 4 } cdslVcClassAbrMcr OBJECT-TYPE SYNTAX Integer32 (1..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassAbrPCR." ::= { cdslVcClassEntry 5 } cdslVcClassAbrIORIF OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies Abr inverse of rate increase factor (1/rif) to the power of two. Note that the actual value in the system is the power of two of this object. That is, for example, a value 5 of this object means 2**5 = 32 in the system for AbrIORIF. Range (0..15) to the power of two is the range (1..32768)." ::= { cdslVcClassEntry 6 } cdslVcClassAbrIORDF OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "Abr inverse of rate decrease factor (1/rdf) to the power of two. Note that the actual value is the power of two of this object. For example, value 5 of this object means 2**5 = 32. Range (0..15) to the power of two is the range (1..32768)." ::= { cdslVcClassEntry 7 } cdslVcClassBroadcast OBJECT-TYPE SYNTAX INTEGER { false (0), true (1), unknown(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether to allow broadcast or not. When set the value, do not use unknown." DEFVAL { false } ::= { cdslVcClassEntry 8 } cdslVcClassEncapsulation OBJECT-TYPE SYNTAX INTEGER { default (0), aal5snap(1), aal5mux (2), aal5nlpid (3), aal34smds (4), aal5ilmi (5), aal5qsaal (6), aal5ciscoppp (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies encapsulation method." ::= { cdslVcClassEntry 9 } cdslVcClassMuxLinkType OBJECT-TYPE SYNTAX INTEGER { ip (1), ppp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the link type if the encapsulation is aal5mux. 1 for IP and 2 for PPP." DEFVAL { ppp } ::= { cdslVcClassEntry 10 } cdslVcClassVirtualTemplate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The virtual template number. Value zero means not configured." ::= { cdslVcClassEntry 11 } cdslVcClassIdleTimeout OBJECT-TYPE SYNTAX Integer32 (0..2000000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies idle timeout." ::= { cdslVcClassEntry 12 } cdslVcClassIdleMTR OBJECT-TYPE SYNTAX Integer32 (0..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the minimum traffic rate to keep the connection." ::= { cdslVcClassEntry 13 } cdslVcClassILMIManage OBJECT-TYPE SYNTAX INTEGER { false (0), true (1), unknown(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether to allow ilmi manage or not. When set the value, do not use unknown." DEFVAL { false } ::= { cdslVcClassEntry 14 } cdslVcClassInarp OBJECT-TYPE SYNTAX Integer32 (1..60) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies InARP Frequency in minutes." ::= { cdslVcClassEntry 15 } cdslVcClassOamRetryUpCount OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "OAM retry count before declaring a VC is up" ::= { cdslVcClassEntry 16 } cdslVcClassOamRetryDownCount OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "OAM retry count before declaring a VC is down" ::= { cdslVcClassEntry 17 } cdslVcClassOamPvcManaged OBJECT-TYPE SYNTAX INTEGER { false (0), true (1), unknown(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether to enable VC management on OAM in a PVC. When set the value, do not use unknown." DEFVAL { false } ::= { cdslVcClassEntry 18 } cdslVcClassOamPvcLF OBJECT-TYPE SYNTAX Integer32 (0..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the OAM loopback frequency." ::= { cdslVcClassEntry 19 } cdslVcClassOamSvcManaged OBJECT-TYPE SYNTAX INTEGER { false (0), true (1), unknown(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether to enable VC management on OAM on SVC SVC. When set the value, do not use unknown." DEFVAL { false } ::= { cdslVcClassEntry 20 } cdslVcClassOamSvcLF OBJECT-TYPE SYNTAX Integer32 (0..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the OAM loopback frequency for SVC" ::= { cdslVcClassEntry 21 } cdslVcClassProtocolIpBC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether to allow the pseudo-broadcast on the protocol IP inarp connections or not." ::= { cdslVcClassEntry 22 } cdslVcClassProtocolIpxBC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether to allow the pseudo-broadcast on the protocol IPX inarp connections or not." ::= { cdslVcClassEntry 23 } cdslVcClassTransmitPriority OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the transmit priority." ::= { cdslVcClassEntry 24 } cdslVcClassUbrPCR OBJECT-TYPE SYNTAX Integer32 (1..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Ubr Peak Cell Rate." ::= { cdslVcClassEntry 25 } cdslVcClassUbrInputPCR OBJECT-TYPE SYNTAX Integer32 (1..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Ubr Input Peak Cell Rate." ::= { cdslVcClassEntry 26 } cdslVcClassUbrPlusPCR OBJECT-TYPE SYNTAX Integer32 (1..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Ubr+ Peak Cell Rate." ::= { cdslVcClassEntry 27 } cdslVcClassUbrPlusMCR OBJECT-TYPE SYNTAX Integer32 (0..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Ubr+ Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassUbrPlusPCR." ::= { cdslVcClassEntry 28 } cdslVcClassUbrPlusInputPCR OBJECT-TYPE SYNTAX Integer32 (1..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Ubr+ Input Peak Cell Rate." ::= { cdslVcClassEntry 29 } cdslVcClassUbrPlusInputMCR OBJECT-TYPE SYNTAX Integer32 (0..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Ubr+ Input Minimum Cell Rate. It shall be smaller than cdslVcClassUbrPlusInputPCR." ::= { cdslVcClassEntry 30 } cdslVcClassVbrNrtPCR OBJECT-TYPE SYNTAX Integer32 (1..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Vbr-Nrt Peak Cell Rate." ::= { cdslVcClassEntry 31 } cdslVcClassVbrNrtSCR OBJECT-TYPE SYNTAX Integer32 (1..1) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Vbr-Nrt Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtPCR." ::= { cdslVcClassEntry 32 } cdslVcClassVbrNrtInputBP OBJECT-TYPE SYNTAX Integer32 (1..65536) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Vbr-Nrt Input Burst Parameter: rounded on AIP to the nearest 32, used as is on NPM." ::= { cdslVcClassEntry 33 } cdslVcClassVbrNrtInputPCR OBJECT-TYPE SYNTAX Integer32 (1..155000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Vbr-Nrt Input Peak Cell Rate." ::= { cdslVcClassEntry 34 } cdslVcClassVbrNrtInputSCR OBJECT-TYPE SYNTAX Integer32 (1..1) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Vbr-Nrt Input Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtInputPCR." ::= { cdslVcClassEntry 35 } cdslVcClassVbrNrtInputMBS OBJECT-TYPE SYNTAX Integer32 (1..65536) UNITS "cells" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Input Maximum Burst Size." ::= { cdslVcClassEntry 36 } cdslVcClassRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or modify or delete an existing row in this table. The return value of this object is always 'active', if the row exists. To delete the row, set the value to 'destroy'. When creating a new row, 'createAndGo' is the default value and method even if 'createAndWait' is specified. The row and the VC class will be created. When deleting a vc class, if there is still reference to it, it is made invisibile. Otherwise, it is removed physically." DEFVAL { active } ::= { cdslVcClassEntry 37 } -- Notifications ciscoDslProvMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoDslProvisionMIB 2 } -- Conformance ciscoDslProvMIBConformance OBJECT IDENTIFIER ::= { ciscoDslProvisionMIB 3 } ciscoDslProvMIBCompliances OBJECT IDENTIFIER ::= { ciscoDslProvMIBConformance 1 } ciscoDslProvMIBGroups OBJECT IDENTIFIER ::= { ciscoDslProvMIBConformance 2 } -- Compliance ciscoDslProvMIBBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco DSL Provision Management MIB. " MODULE -- this module MANDATORY-GROUPS { ciscoNrpSlotGroup, ciscoVirtualTemplateGroup, ciscoIpPoolGroup, ciscoDslPVCGroup } ::= { ciscoDslProvMIBCompliances 1 } -- Units of Conformance ciscoNrpSlotGroup OBJECT-GROUP OBJECTS { cdslMaxNrps, cdslNrpNumber, cdslNrpIpAddress } STATUS current DESCRIPTION "The DSL Provision NRP Slot Group." ::= { ciscoDslProvMIBGroups 1 } ciscoVirtualTemplateGroup OBJECT-GROUP OBJECTS { cdslMaxVirtualTemplates, cdslVirtualTemplates, cdslVTIpAddressMethod, cdslVTIpAddress, cdslVTIpAddressMask, cdslVTIpIfIndex, cdslVTPeerIpAddressMethod, cdslVTPeerIpAddrPool, cdslVTPppAuthPap, cdslVTPppAuthChap, cdslVTPppAuthMSChap, cdslVTPppChapHost, cdslVTPppChapPassword, cdslVTPppChapEncrypType, cdslVTPppChapRefuse, cdslVTPppChapWaitPeer, cdslVTPppPapUserName, cdslVTPppPapPassword, cdslVTPppPapEncrypType, cdslVTPppUseTacacs, cdslVTRowStatus } STATUS current DESCRIPTION "The DSL Provision Virtual Template Interface Group." ::= { ciscoDslProvMIBGroups 2 } ciscoIpPoolGroup OBJECT-GROUP OBJECTS { cdslLocalIpAddrPools, cdslMaxLocalIpAddrPools, cdslLocalIpAddrPoolFreeAddresses, cdslLocalIpAddrPoolInUseAddresses, cdslLocalIpAddrRangeRowStatus } STATUS current DESCRIPTION "The DSL Provision IP Pool Group." ::= { ciscoDslProvMIBGroups 3 } ciscoDslPVCGroup OBJECT-GROUP OBJECTS { cdslPppOverAtmPvcs, cdslAtmPvcName, cdslAtmPvcSubIfNumber, cdslAtmPvcClass, cdslAtmPvcAbrPCR, cdslAtmPvcAbrIORIF, cdslAtmPvcAbrIORDF, cdslAtmPvcBroadcast, cdslAtmPvcEncapsulation, cdslAtmPvcMuxLinkType, cdslAtmPvcILMIManage, cdslAtmPvcInarp, cdslAtmPvcOamRetryUpCount, cdslAtmPvcOamRetryDownCount, cdslAtmPvcOamPvcManaged, cdslAtmPvcOamPvcLF, cdslAtmPvcProtocolIpBC, cdslAtmPvcProtocolIpxBC, cdslAtmPvcUbrPCR, cdslAtmPvcUbrPlusPCR, cdslAtmPvcUbrPlusMCR, cdslAtmPvcVbrNrtPCR, cdslAtmPvcVbrNrtSCR, cdslAtmPvcVirtualTemplate, cdslAtmPvcRowStatus, cdslAtmPvcQosType, cdslAtmPvcAbrMCR } STATUS current DESCRIPTION "The DSL Provision PVC Group." ::= { ciscoDslProvMIBGroups 4 } ciscoVcClassGroup OBJECT-GROUP OBJECTS { cdslVcClasses, cdslMaxVcClasses, cdslVcClassType, cdslVcClassQosType, cdslVcClassAbrPCR, cdslVcClassAbrMcr, cdslVcClassAbrIORIF, cdslVcClassAbrIORDF, cdslVcClassBroadcast, cdslVcClassEncapsulation, cdslVcClassMuxLinkType, cdslVcClassIdleTimeout, cdslVcClassIdleMTR, cdslVcClassILMIManage, cdslVcClassInarp, cdslVcClassOamRetryUpCount, cdslVcClassOamRetryDownCount, cdslVcClassOamPvcManaged, cdslVcClassOamPvcLF, cdslVcClassOamSvcManaged, cdslVcClassOamSvcLF, cdslVcClassProtocolIpBC, cdslVcClassProtocolIpxBC, cdslVcClassTransmitPriority, cdslVcClassUbrPCR, cdslVcClassUbrInputPCR, cdslVcClassUbrPlusPCR, cdslVcClassUbrPlusMCR, cdslVcClassUbrPlusInputPCR, cdslVcClassUbrPlusInputMCR, cdslVcClassVbrNrtPCR, cdslVcClassVbrNrtSCR, cdslVcClassVbrNrtInputBP, cdslVcClassVbrNrtInputPCR, cdslVcClassVbrNrtInputSCR, cdslVcClassVbrNrtInputMBS, cdslVcClassVirtualTemplate, cdslVcClassRowStatus } STATUS current DESCRIPTION "The DSL Provision VC Class Group." ::= { ciscoDslProvMIBGroups 5 } END