| ciscoExtScsiGenInstanceEntry |
.1.3.6.1.4.1.9.9.299.1.1.1.1 |
|
An entry contains disk group ID and/or entity
physical index of a disk group/line card/supervisor
depending on the ciscoScsiInstIndex value
assignment as defined above. There is a one-to-one
mapping between an entry here and
ciscoScsiInstanceEntry.
|
| ciscoExtScsiLunDiscSpinLock |
.1.3.6.1.4.1.9.9.299.1.1.2 |
|
This object is used to facilitate triggerring
the LUN/target discovery by multiple managers.
The procedure for triggering LUN/target discovery
is as follows:
1. Retrieve the value of
ciscoExtScsiLunDiscSpinLock and determine the
value for ciscoExtScsiStartLunDisc,
ciscoExtScsiLunDiscOs, ciscoExtScsiLunDiscVsanID,
ciscoExtScsiLunDiscPortId and
ciscoExtScsiDiscType objects.
2. Set the value of ciscoExtScsiLunDiscSpinLock
to the retrieved value, and in the same PDU,
the value of ciscoExtScsiLunDiscOs
to the determined value. If the set fails for
the ciscoExtScsiLunDiscSpinLock object, go back
to step 1.
3. Set the value of ciscoExtScsiLunDiscSpinLock
to the retrieved value plus 1, and in the same
PDU, the value of ciscoExtScsiLunDiscVsanID to
the determined value. If the set fails for
the ciscoExtScsiLunDiscSpinLock object, go back
to step 1.
4. Set the value of ciscoExtScsiLunDiscSpinLock
to the retrieved value plus 2, and in the same
PDU, the value of ciscoExtScsiLunDiscPortId to
the determined value. If the set fails for the
ciscoExtScsiLunDiscSpinLock object, go back to
step 1.
5. Set the value of ciscoExtScsiLunDiscSpinLock
to the retrieved value plus 3, and in the same
PDU, the value of ciscoExtScsiDiscType to
the determined value. If the set fails for
the ciscoExtScsiLunDiscSpinLock object, go
back to step 1.
6. Set the value of ciscoExtScsiLunDiscSpinLock
to the retrieved value plus 4, and in the same
PDU, the value of ciscoExtScsiStartLunDisc to
the determined value. If the set fails for
the ciscoExtScsiLunDiscSpinLock object, go
back to step 1.
Note that if it is possible to include
ciscoExtScsiLunDiscVsanID,
ciscoExtScsiLunDiscPortId, ciscoExtScsiDiscType
and/or ciscoExtScsiStartLunDisc in the
(Set Request) PDU of an earlier step, then steps
3, 4 and/or 5 can be eliminated.
|
| ciscoExtScsiStartLunDisc |
.1.3.6.1.4.1.9.9.299.1.1.3 |
|
If this object is set to 'startLocalDiscovery',
then only the directly attached SCSI target
devices/ports and/or LUNs associated with them
on all VSANs will be discovered.
If this object is set to 'startRemoteDiscovery',
then all SCSI target devices/ports and/or LUNs
associated with them on all VSANs in the whole
fabric, except the directly attached ones, will
be discovered.
If this object is set to 'startDiscovery', then
both the above discoveries will be carried out.
If this object is set to 'startPartialDiscovery',
then all SCSI target devices/ports and/or LUNs
associated with them on the domain IDs and VSANs
specified in the ciscoExtScsiPartialLunDiscTable,
will be discovered. If the
ciscoExtScsiPartialLunDiscTable is empty, then
no SCSI target devices/ports will be discovered.
If this object is set to 'startPortBasedDiscovery',
then all LUNs/targets associated with the port
specified by ciscoExtScsiLunDiscPortId object will
be discovered. If the ciscoExtScsiLunDiscPortId
object is not set to a valid value, then no
LUNs/targets will be discovered. The value of
ciscoExtScsiLunDiscVsanId object should be set to
the value of the VSAN on which the port based
discovery is to be carried out.
No action is taken if this object is set
to 'noop'.
The value of this object when read is
always 'noop'.
After a discovery has been triggered, this
object cannot be set again to trigger
another discovery, when the value of
ciscoExtScsiLunDiscStatus is 'inProgress'.
In all the above cases, if the
ciscoExtScsiLunDiscOs object is set to a
particular Operating System, then the discovery
of the LUNs will take place only for that
Operating System.
|
| ciscoExtScsiLunDiscStatus |
.1.3.6.1.4.1.9.9.299.1.1.4 |
|
This object indicates the outcome of the
LUN/target discovery on the local switch.
This object contains the status of the most
recent discovery.
inProgress(1) - indicates that the discovery is
still in progress.
completed(2) - indicates that the discovery is
complete.
failure(3) - indicates that the discovery
encountered a failure.
|
| ciscoExtScsiLunDiscCompleteTime |
.1.3.6.1.4.1.9.9.299.1.1.5 |
|
This object contains the value of sysUpTime
when the last discovery was completed.
The value of this object will be zero, if
discovery has not been performed since the
last system restart.
|
| ciscoExtScsiIntrDiscTgtEntry |
.1.3.6.1.4.1.9.9.299.1.1.6.1 |
|
An entry (conceptual row) in this table.
|
| ciscoExtScsiIntrDiscLunsEntry |
.1.3.6.1.4.1.9.9.299.1.1.7.1 |
|
An entry (conceptual row) in this table.
|
| ciscoExtScsiNotificationCntl |
.1.3.6.1.4.1.9.9.299.1.1.8 |
|
This object specifies if the
'ciscoExtScsiLunDiscDoneNotify' notification
should be generated or not.
If the value of this object is 'true', then
the notification is generated when a
discovery is completed.
If the value of this object is 'false', then
the notification is not generated.
|
| ciscoExtScsiPartialLunDiscEntry |
.1.3.6.1.4.1.9.9.299.1.1.9.1 |
|
An entry (conceptual row) in this table.
|
| ciscoExtScsiLunDiscOs |
.1.3.6.1.4.1.9.9.299.1.1.10 |
|
This object specifies the Operating System on
which the LUNs/targets need to be discovered.
|
| ciscoExtScsiLunDiscVsanId |
.1.3.6.1.4.1.9.9.299.1.1.11 |
|
This object specifies the VSAN on which the LUNs/
targets need to be discovered, in the case of
port-based discovery. If a port-based discovery is
not being initiated, then the value of this object
will be ignored.
|
| ciscoExtScsiLunDiscPortId |
.1.3.6.1.4.1.9.9.299.1.1.12 |
|
This object specifies the FCID of the port for
which the LUNs/targets need to be discovered, in
the case of port-based discovery. If a port-based
discovery is not being initiated, then the value
of this object will be ignored and should be set
to all zeros.
|
| ciscoExtScsiLunCacheScsiIndex |
.1.3.6.1.4.1.9.9.299.1.1.13 |
|
This object specifies the first index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It helps the
management station to directly access the
discovered LUN entry.
|
| ciscoExtScsiLunCacheDevIndex |
.1.3.6.1.4.1.9.9.299.1.1.14 |
|
This object specifies the second index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It helps the
management station to directly access the
discovered LUN entry.
|
| ciscoExtScsiLunCachePortIndex |
.1.3.6.1.4.1.9.9.299.1.1.15 |
|
This object specifies the third index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It helps the
management station to directly access the
discovered LUN entry.
|
| ciscoExtScsiLunCacheTgtIndex |
.1.3.6.1.4.1.9.9.299.1.1.16 |
|
This object specifies the fourth index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It helps the
management station to directly access the
discovered LUN entry.
|
| ciscoExtScsiDiscType |
.1.3.6.1.4.1.9.9.299.1.1.17 |
|
This object specifies the type of discovery
desired.
Setting this object to 'targets(1), results in
only targets being discovered and the
ciscoExtScsiIntrDiscTgtTable being populated
with them. The corresponding LUNs are not
discovered.
Setting this object to 'luns(2)', results in
targets and LUNs being discovered and the
ciscoExtScsiIntrDiscTgtTable and
ciscoExtScsiIntrDiscLunsTable are populated.
|
| ciscoExtScsiDiskGrpId |
.1.3.6.1.4.1.9.9.299.1.1.1.1.1 |
|
This object contains the disk group
ID of a disk group if the
value of the ciscoScsiInstIndex
corresponds to that of a disk
group. Otherwise, this object will
contain a null string.
|
| ciscoExtScsiLineCardOrSup |
.1.3.6.1.4.1.9.9.299.1.1.1.1.2 |
|
This object contains the entity
physical index of a line card
if the ciscoScsiInstIndex value
corresponds to that of a disk
group or a line card.
Otherwise, this object contains the
entity physical index value of the
supervisor of the system.
|
| ciscoExtScsiIntrDiscTgtVsanId |
.1.3.6.1.4.1.9.9.299.1.1.6.1.1 |
|
The VSAN to which this target belongs to.
|
| ciscoExtScsiIntrDiscTgtDevType |
.1.3.6.1.4.1.9.9.299.1.1.6.1.2 |
|
The device type of the SCSI target.
|
| ciscoExtScsiIntrDiscTgtVendorId |
.1.3.6.1.4.1.9.9.299.1.1.6.1.3 |
|
The vendor Id of the SCSI target.
|
| ciscoExtScsiIntrDiscTgtProductId |
.1.3.6.1.4.1.9.9.299.1.1.6.1.4 |
|
The product Id of the SCSI target.
|
| ciscoExtScsiIntrDiscTgtRevLevel |
.1.3.6.1.4.1.9.9.299.1.1.6.1.5 |
|
The product revision level of the SCSI target.
|
| ciscoExtScsiIntrDiscTgtOtherInfo |
.1.3.6.1.4.1.9.9.299.1.1.6.1.6 |
|
The bytes from 0 to 7 in the INQUIRY command
response data.
|
| ciscoExtScsiIntrDiscLunCapacity |
.1.3.6.1.4.1.9.9.299.1.1.7.1.1 |
|
The capacity of this Lun.
|
| ciscoExtScsiIntrDiscLunNumber |
.1.3.6.1.4.1.9.9.299.1.1.7.1.2 |
|
The number of this LUN.
|
| ciscoExtScsiIntrDiscLunSerialNum |
.1.3.6.1.4.1.9.9.299.1.1.7.1.3 |
|
The serial number of this LUN.
|
| ciscoExtScsiIntrDiscLunOs |
.1.3.6.1.4.1.9.9.299.1.1.7.1.4 |
|
The Operating System for which this LUN was
discovered.
|
| ciscoExtScsiIntrDiscLunPortId |
.1.3.6.1.4.1.9.9.299.1.1.7.1.5 |
|
The port on which this LUN was discovered.
LUNs are present on SCSI target ports. This object
represents the FC-ID (Fibre Channel Identifier) of
the target port on which this LUN was discovered.
|
| ciscoExtScsiPartialLunDomId |
.1.3.6.1.4.1.9.9.299.1.1.9.1.1 |
|
The Domain Id on which the lun discovery needs
to be carried out.
|
| ciscoExtScsiPartialLunRowStatus |
.1.3.6.1.4.1.9.9.299.1.1.9.1.2 |
|
The status of this conceptual row.
|
