CISCO-IEEE8023-LAG-CAPABILITY device MIB details by Cisco
CISCO-IEEE8023-LAG-CAPABILITY file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-IEEE8023-LAG-CAPABILITY.
Vendor: | Cisco |
---|---|
Mib: | CISCO-IEEE8023-LAG-CAPABILITY [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- CISCO-IEEE8023-LAG-CAPABILITY.my: -- Cisco IEEE8023-LAG-MIB AGENT-CAPABILITIES -- -- September 2003, Edward Pham -- -- Copyright (c) 2003 by Cisco Systesms, Inc. -- All rights reserved. -- ***************************************************************** CISCO-IEEE8023-LAG-CAPABILITY DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI AGENT-CAPABILITIES FROM SNMPv2-CONF ciscoAgentCapability FROM CISCO-SMI; ciscoIeee8023LagCapability MODULE-IDENTITY LAST-UPDATED "200309090000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-lan-switch-snmp@cisco.com" DESCRIPTION "The capabilities description of IEEE8023-LAG-MIB." REVISION "200309090000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoAgentCapability 337 } cIeee8023LagCapV12R0111bEXCat6K AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco IOS 12.1(11b)EX on Catalyst 6000/6500 and Cisco 7600 series devices." STATUS current DESCRIPTION "IEEE8023-LAG-MIB capabilities." SUPPORTS IEEE8023-LAG-MIB INCLUDES { dot3adAggGroup, dot3adAggPortListGroup, dot3adAggPortGroup, dot3adAggPortStatsGroup, dot3adTablesLastChangedGroup } VARIATION dot3adAggActorAdminKey DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggCollectorMaxDelay SYNTAX INTEGER (32768..32768) DESCRIPTION "Only value 32768 is supported." VARIATION dot3adAggPortActorOperKey ACCESS read-only DESCRIPTION "Only support read-only access." VARIATION dot3adAggPortPartnerAdminSystemPriority DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminSystemID DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminKey DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminPort DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminPortPriority DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminState DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." ::= { ciscoIeee8023LagCapability 1 } cIeee8023LagCapV12R0214SXCat6K AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco IOS 12.2(14)SX on Catalyst 6000/6500 and Cisco 7600 series devices." STATUS current DESCRIPTION "IEEE8023-LAG-MIB capabilities." SUPPORTS IEEE8023-LAG-MIB INCLUDES { dot3adAggGroup, dot3adAggPortListGroup, dot3adAggPortGroup, dot3adAggPortStatsGroup, dot3adTablesLastChangedGroup } VARIATION dot3adAggActorAdminKey DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggCollectorMaxDelay SYNTAX INTEGER (32768..32768) DESCRIPTION "Only value 32768 is supported." VARIATION dot3adAggPortActorOperKey ACCESS read-only DESCRIPTION "Only support read-only access." VARIATION dot3adAggPortPartnerAdminSystemPriority DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminSystemID DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminKey DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminPort DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminPortPriority DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminState DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." ::= { ciscoIeee8023LagCapability 2 } cIeee8023LagCapCatOSV08R0101 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco CatOS 8.1(1)." STATUS current DESCRIPTION "IEEE8023-LAG-MIB capabilities." SUPPORTS IEEE8023-LAG-MIB INCLUDES { dot3adAggGroup, dot3adAggPortListGroup, dot3adAggPortGroup, dot3adAggPortStatsGroup, dot3adTablesLastChangedGroup } VARIATION dot3adAggActorAdminKey DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggCollectorMaxDelay SYNTAX INTEGER (32768..32768) DESCRIPTION "Only value 32768 is supported." VARIATION dot3adAggPortActorOperKey ACCESS read-only DESCRIPTION "Only support read-only access." VARIATION dot3adAggPortPartnerAdminSystemPriority DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminKey DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminPort DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminPortPriority DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortPartnerAdminState DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." VARIATION dot3adAggPortActorAdminState DESCRIPTION "Setting this object to value other than the existing value in this object would result in an error." ::= { ciscoIeee8023LagCapability 3 } END