| cnatConfName |
.1.3.6.1.4.1.9.10.77.1.1.1.1.1 |
|
The locally arbitrary, but unique identifier
associated with this cnatConfEntry.
|
| cnatConfServiceType |
.1.3.6.1.4.1.9.10.77.1.1.1.1.2 |
|
An indication of the direction in which new sessions
are permitted and the extent of translation done within
the IP and transport headers.
|
| cnatConfTimeoutIcmpIdle |
.1.3.6.1.4.1.9.10.77.1.1.1.1.3 |
|
The interval of time for which an ICMP protocol session,
associated with this configuration, is allowed to remain
valid without any activity.
|
| cnatConfTimeoutUdpIdle |
.1.3.6.1.4.1.9.10.77.1.1.1.1.4 |
|
The interval of time for which a UDP protocol session,
associated with this configuration, is allowed to remain
valid without any activity.
|
| cnatConfTimeoutTcpIdle |
.1.3.6.1.4.1.9.10.77.1.1.1.1.5 |
|
The interval of time for which a TCP protocol session,
associated with this configuration, is allowed to remain
valid without any activity. This timeout value applies
to a TCP session during its data transfer phase.
|
| cnatConfTimeoutTcpNeg |
.1.3.6.1.4.1.9.10.77.1.1.1.1.6 |
|
The interval of time for which a TCP protocol session,
associated with this configuration, is allowed to remain
valid without any activity. This timeout value applies
to a TCP session during its establishment and termination
phases.
|
| cnatConfTimeoutOther |
.1.3.6.1.4.1.9.10.77.1.1.1.1.7 |
|
The interval of time for which a protocol session
other than ICMP, UDP and TCP, associated with this
configuration, is allowed to remain valid, without
any activity.
|
| cnatConfMaxBindLeaseTime |
.1.3.6.1.4.1.9.10.77.1.1.1.1.8 |
|
The maximum lease time for the BIND, associated with
this configuration. Unless the lease time is renewed, a
BIND will not be valid past the lease time. As a special
case, a value of 0 may be assumed to indicate no lease
time limit. Typically, this attribute is of relevance
only in conjunction with Realm-Specific-IP (RSIP)
operation.
|
| cnatConfMaxBindIdleTime |
.1.3.6.1.4.1.9.10.77.1.1.1.1.9 |
|
The maximum time, associated with this configuration,
to allow a dynamic BIND to remain valid with no NAT
session hanging off this BIND. By default for NATIVE
NAT maximum Idle time is 0. External agents could
control this parameter differently. Static Binds and
lease time limited BINDs are not affected by this
parameter.
|
| cnatConfStorageType |
.1.3.6.1.4.1.9.10.77.1.1.1.1.10 |
|
The storage type for this conceptual row.
|
| cnatConfStatus |
.1.3.6.1.4.1.9.10.77.1.1.1.1.11 |
|
The status of this conceptual row.
|
| cnatConfStaticAddrMapName |
.1.3.6.1.4.1.9.10.77.1.1.2.1.1 |
|
An arbitrary, but unique identifier associated with this
cnatConfStaticAddrMapEntry. The value of this object is
unique across both the static address map and the dynamic
address map tables.
|
| cnatConfStaticAddrMapType |
.1.3.6.1.4.1.9.10.77.1.1.2.1.2 |
|
Address (and Transport-ID) maps may be defined for both
inbound and outbound direction. Outbound address map
refers to mapping a selected set of addresses from
private realm to a selected set of addresses in external
realm; whereas inbound address map refers to mapping a
set of addresses from the external realm to private
realm.
|
| cnatConfStaticLocalAddrFrom |
.1.3.6.1.4.1.9.10.77.1.1.2.1.3 |
|
This object specifies the first IP address of the range
of IP addresses mapped by this translation entry.
|
| cnatConfStaticLocalAddrTo |
.1.3.6.1.4.1.9.10.77.1.1.2.1.4 |
|
This object specifies the last IP address of the range of
IP addresses mapped by this translation entry. If only
a single address being mapped, the value of this object
is equal to the value of cnatConfStaticLocalAddrFrom. The
number addresses in the range defined by
cnatConfStaticLocalAddrFrom and cnatConfStaticLocalAddrTo
should be equal to the number of addresses in the range
defined by cnatConfStaticGlobalAddrFrom and
cnatConfStaticGlobalAddrTo.
|
| cnatConfStaticLocalPortFrom |
.1.3.6.1.4.1.9.10.77.1.1.2.1.5 |
|
If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port number in the range of ports being
mapped. If the translation specifies a single port, then
the value of this object is equal to the value of
cnatConfStaticLocalPortTo.
|
| cnatConfStaticLocalPortTo |
.1.3.6.1.4.1.9.10.77.1.1.2.1.6 |
|
If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the last port number in the range of ports being mapped.
If the translation specifies a single port, then the
value of this object is equal to the value of
cnatConfStaticLocalPortFrom.
|
| cnatConfStaticGlobalAddrFrom |
.1.3.6.1.4.1.9.10.77.1.1.2.1.7 |
|
This object specifies the first IP address of the range of
IP addresses being mapped to.
|
| cnatConfStaticGlobalAddrTo |
.1.3.6.1.4.1.9.10.77.1.1.2.1.8 |
|
This object specifies the last IP address of the range of
IP addresses being mapped to. If only a single address is
being mapped to, the value of this object is equal to the
value of cnatConfStaticGlobalAddrFrom.The number addresses
in the range defined by cnatConfStaticGlobalAddrFrom and
cnatConfStaticGlobalAddrTo should be equal to the number
of addresses in the range defined by
cnatConfStaticLocalAddrFrom and
cnatConfStaticLocalAddrTo.
|
| cnatConfStaticGlobalPortFrom |
.1.3.6.1.4.1.9.10.77.1.1.2.1.9 |
|
If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port number in the range of ports being mapped
to. If the translation specifies a single port, then the
value of this object is equal to the value
cnatConfStaticGlobalPortTo.
|
| cnatConfStaticGlobalPortTo |
.1.3.6.1.4.1.9.10.77.1.1.2.1.10 |
|
If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual describes
NAPT, then the value of this object specifies the last
port number in the range of ports being to. If the
translation specifies a single port, then the value of
this object is equal to the value of
cnatConfStaticGlobalPortFrom.
|
| cnatConfStaticProtocol |
.1.3.6.1.4.1.9.10.77.1.1.2.1.11 |
|
This object specifies a protocol identifier. If the
value of this object is '0', then this basic NAT entry
applies to all IP traffic. If the value of this object
is non-zero, then this NAT entry only applies to IP
traffic with the specified protocol.
|
| cnatConfStaticAddrMapStorageType |
.1.3.6.1.4.1.9.10.77.1.1.2.1.12 |
|
The storage type for this conceptual row.
|
| cnatConfStaticAddrMapStatus |
.1.3.6.1.4.1.9.10.77.1.1.2.1.13 |
|
The status of this conceptual row.
To create a row in this table, a manager must set this
object to either createAndGo(4) or createAndWait(5).
|
| cnatConfDynAddrMapName |
.1.3.6.1.4.1.9.10.77.1.1.3.1.1 |
|
An arbitrary, but unique identifier associated with this
cnatConfDynAddrMapEntry. The value of this object is
unique across both the static address map and the dynamic
address map tables.
|
| cnatConfDynAddressMapType |
.1.3.6.1.4.1.9.10.77.1.1.3.1.2 |
|
Address (and Transport-ID) maps may be defined for both
inbound and outbound direction. Outbound address map
refers to mapping a selected set of addresses from
private realm to a selected set of addresses in external
realm; whereas inbound address map refers to mapping a
set of addresses from the external realm to private
realm.
|
| cnatConfDynLocalAddrFrom |
.1.3.6.1.4.1.9.10.77.1.1.3.1.3 |
|
This object specifies the first IP address of the range
of IP addresses mapped by this translation entry.
|
| cnatConfDynLocalAddrTo |
.1.3.6.1.4.1.9.10.77.1.1.3.1.4 |
|
This object specifies the last IP address of the range of
IP addresses mapped by this translation entry.
|
| cnatConfDynLocalPortFrom |
.1.3.6.1.4.1.9.10.77.1.1.3.1.5 |
|
If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port number in the range of ports being mapped.
If the translation specifies a single port, then the
value of this object is equal to the value of
cnatConfDynLocalPortTo.
|
| cnatConfDynLocalPortTo |
.1.3.6.1.4.1.9.10.77.1.1.3.1.6 |
|
If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the last port number in the range of ports being mapped.
If the translation specifies a single port, then the
value of this object is equal to the value of
cnatConfDynLocalPortFrom.
|
| cnatConfDynGlobalAddrFrom |
.1.3.6.1.4.1.9.10.77.1.1.3.1.7 |
|
This object specifies the first IP address of the range
of IP addresses being mapped to.
|
| cnatConfDynGlobalAddrTo |
.1.3.6.1.4.1.9.10.77.1.1.3.1.8 |
|
This object specifies the last IP address of the range of
IP addresses being mapped to.
|
| cnatConfDynGlobalPortFrom |
.1.3.6.1.4.1.9.10.77.1.1.3.1.9 |
|
If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the first port number in the range of ports being mapped
to. If the translation specifies a single port, then the
value of this object is equal to the value of
cnatConfDynGlobalPortTo.
|
| cnatConfDynGlobalPortTo |
.1.3.6.1.4.1.9.10.77.1.1.3.1.10 |
|
If this conceptual row describes a basic NAT, then the
value of this object is '0'. If this conceptual row
describes NAPT, then the value of this object specifies
the last port number in the range of ports being mapped
to. If the translation specifies a single port, then the
value of this object is equal to the value of
cnatConfDynGlobalPortFrom.
|
| cnatConfDynProtocol |
.1.3.6.1.4.1.9.10.77.1.1.3.1.11 |
|
This object specifies a protocol identifier. If the
value of this object is '0', then this basic NAT entry
applies to all IP traffic. If the value of this object is
non-zero, then this NAT entry only applies to IP traffic
with the specified protocol.
|
| cnatConfDynAddrMapStorageType |
.1.3.6.1.4.1.9.10.77.1.1.3.1.12 |
|
The storage type for this conceptual row.
|
| cnatConfDynAddrMapStatus |
.1.3.6.1.4.1.9.10.77.1.1.3.1.13 |
|
The status of this conceptual row.
To create a row in this table, a manager must set this
object to either createAndGo(4) or createAndWait(5).
|
| cnatInterfaceIndex |
.1.3.6.1.4.1.9.10.77.1.1.4.1.1 |
|
The ifIndex of the interface on which NAT is enabled.
|
| cnatInterfaceRealm |
.1.3.6.1.4.1.9.10.77.1.1.4.1.2 |
|
This object identifies whether this interface is
connected to the private or the public realm.
|
| cnatInterfaceStorageType |
.1.3.6.1.4.1.9.10.77.1.1.4.1.3 |
|
The storage type for this conceptual row.
|
| cnatInterfaceStatus |
.1.3.6.1.4.1.9.10.77.1.1.4.1.4 |
|
Status of NAT on this interface. An active status
indicates that NAT is enabled on this interface.
|
| cnatAddrBindLocalAddr |
.1.3.6.1.4.1.9.10.77.1.2.2.1.1 |
|
This object represents the private-realm specific network
layer address, which maps to the public-realm address
represented by cnatAddrBindGlobalAddr.
|
| cnatAddrBindGlobalAddr |
.1.3.6.1.4.1.9.10.77.1.2.2.1.2 |
|
This object represents the public-realm network layer
address that maps to the private-realm network layer
address represented by cnatAddrBindLocalAddr.
|
| cnatAddrBindId |
.1.3.6.1.4.1.9.10.77.1.2.2.1.3 |
|
This object represents a BIND id that is dynamically
assigned to each BIND by a NAT enabled device. Each
BIND is represented by a unique BIND id across both,
the Address bind and Address-Port bind tables.
|
| cnatAddrBindDirection |
.1.3.6.1.4.1.9.10.77.1.2.2.1.4 |
|
This object represents the direction of the BIND. A
BIND may be either uni-directional or bi-directional,
same as the orientation of the address map, based on
which this bind is formed. The direction of this bind
is with reference to the private realm.
|
| cnatAddrBindType |
.1.3.6.1.4.1.9.10.77.1.2.2.1.5 |
|
This object indicates whether the BIND is static or
dynamic.
|
| cnatAddrBindConfName |
.1.3.6.1.4.1.9.10.77.1.2.2.1.6 |
|
This object is a pointer to the cnatConfTable entry (and
the parameters of that entry) which was used in creating
this BIND.
|
| cnatAddrBindSessionCount |
.1.3.6.1.4.1.9.10.77.1.2.2.1.7 |
|
Number of sessions currently using this BIND.
|
| cnatAddrBindCurrentIdleTime |
.1.3.6.1.4.1.9.10.77.1.2.2.1.8 |
|
At any given instance of time, this object indicates the
time that this BIND has been idle with no sessions
attached to it. The value represented by this object is
of relevance only when the value of Maximum Idle time
(cnatConfMaxBindIdleTime) is non-zero.
|
| cnatAddrBindInTranslate |
.1.3.6.1.4.1.9.10.77.1.2.2.1.9 |
|
The number of inbound packets that were translated as per
this BIND entry.
|
| cnatAddrBindOutTranslate |
.1.3.6.1.4.1.9.10.77.1.2.2.1.10 |
|
The number of outbound packets that were translated as
per this BIND entry.
|
| cnatAddrPortBindLocalAddr |
.1.3.6.1.4.1.9.10.77.1.2.4.1.1 |
|
This object represents the private-realm specific network
layer address which, in conjunction with
cnatAddrPortBindLocalPort, maps to the public-realm
network layer address and transport id represented by
cnatAddrPortBindGlobalAddr and cnatAddrPortBindGlobalPort
respectively.
|
| cnatAddrPortBindLocalPort |
.1.3.6.1.4.1.9.10.77.1.2.4.1.2 |
|
This object represents the private-realm specific port
number (or query ID in case of ICMP messages) which, in
conjunction with cnatAddrPortBindLocalAddr, maps to the
public-realm network layer address and transport id
represented by cnatAddrPortBindGlobalAddr and
cnatAddrPortBindGlobalPort respectively.
|
| cnatAddrPortBindProtocol |
.1.3.6.1.4.1.9.10.77.1.2.4.1.3 |
|
This object specifies a protocol identifier. If the
value of this object is '0', then this BIND entry
applies to all IP traffic. If the value of this object is
non-zero, then this NAT entry only applies to IP traffic
with the specified protocol.
|
| cnatAddrPortBindGlobalAddr |
.1.3.6.1.4.1.9.10.77.1.2.4.1.4 |
|
This object represents the public-realm specific network
layer address that, in conjunction with
cnatAddrPortBindGlobalPort, maps to the private-realm
network layer address and transport id represented by
cnatAddrPortBindLocalAddr and cnatAddrPortBindLocalPort
respectively.
|
| cnatAddrPortBindGlobalPort |
.1.3.6.1.4.1.9.10.77.1.2.4.1.5 |
|
This object represents the port number (or query id in
case of ICMP) that, in conjunction with
cnatAddrPortBindGlobalAddr, maps to the private-realm
network layer address and transport id represented by
cnatAddrPortBindLocalAddr and cnatAddrPortBindLocalPort
respectively.
|
| cnatAddrPortBindId |
.1.3.6.1.4.1.9.10.77.1.2.4.1.6 |
|
This object represents a BIND id that is dynamically
assigned to each BIND by a NAT enabled device. Each
BIND is represented by a unique BIND id across both,
the Address Bind and Address-Port Bind tables.
|
| cnatAddrPortBindDirection |
.1.3.6.1.4.1.9.10.77.1.2.4.1.7 |
|
This object represents the direction of the BIND. A
BIND may be either uni-directional or bi-directional,
same as the orientation of the address map, based on
which this bind is formed. The direction of this bind
is with reference to the private realm.
|
| cnatAddrPortBindType |
.1.3.6.1.4.1.9.10.77.1.2.4.1.8 |
|
This object indicates whether the BIND is static or
dynamic.
|
| cnatAddrPortBindConfName |
.1.3.6.1.4.1.9.10.77.1.2.4.1.9 |
|
This object is a pointer to the cnatConfTable entry (and
the parameters of that entry) which was used in creating
this BIND.
|
| cnatAddrPortBindSessionCount |
.1.3.6.1.4.1.9.10.77.1.2.4.1.10 |
|
Number of sessions currently using this BIND.
|
| cnatAddrPortBindCurrentIdleTime |
.1.3.6.1.4.1.9.10.77.1.2.4.1.11 |
|
At any given instance of time, this object indicates the
time that this BIND has been idle with no sessions
attached to it. The value represented by this object is
of relevance only when the value of Maximum Idle time
(cnatConfMaxBindIdleTime) is non-zero.
|
| cnatAddrPortBindInTranslate |
.1.3.6.1.4.1.9.10.77.1.2.4.1.12 |
|
The number of inbound packets that were translated as per
this BIND entry.
|
| cnatAddrPortBindOutTranslate |
.1.3.6.1.4.1.9.10.77.1.2.4.1.13 |
|
The number of outbound packets that were translated as per
this BIND entry.
|
| cnatSessionBindId |
.1.3.6.1.4.1.9.10.77.1.2.5.1.1 |
|
This object represents a BIND id that is dynamically
assigned to each BIND by a NAT enabled device. This
bind id is that same as represented by the BindId
objects in the Address bind and Address-Port bind
tables.
|
| cnatSessionId |
.1.3.6.1.4.1.9.10.77.1.2.5.1.2 |
|
The session ID for this NAT session.
|
| cnatSessionDirection |
.1.3.6.1.4.1.9.10.77.1.2.5.1.3 |
|
The direction of this session with respect to the
local network. 'inbound' indicates that this session
was initiated from the public network into the private
network. 'outbound' indicates that this session was
initiated from the private network into the public
network.
|
| cnatSessionUpTime |
.1.3.6.1.4.1.9.10.77.1.2.5.1.4 |
|
The up time of this session in one-hundredths of a
second.
|
| cnatSessionProtocolType |
.1.3.6.1.4.1.9.10.77.1.2.5.1.5 |
|
The protocol type of this session.
TCP and UDP sessions are uniquely identified by the
tuple of (source IP address, source UDP/TCP port,
destination IP address, destination TCP/UCP port).
ICMP query sessions are identified by the tuple of
(source IP address, ICMP query ID, destination IP
address).
|
| cnatSessionOrigPrivateAddr |
.1.3.6.1.4.1.9.10.77.1.2.5.1.6 |
|
The original IP address of the session endpoint that
lies in the private network.
|
| cnatSessionTransPrivateAddr |
.1.3.6.1.4.1.9.10.77.1.2.5.1.7 |
|
The translated IP address of the session endpoint that
lies in the private network. The value of this object
is equal to that of the original public IP Address
(cnatSessionOrigPrivateAddr) when there is no
translation.
|
| cnatSessionOrigPrivatePort |
.1.3.6.1.4.1.9.10.77.1.2.5.1.8 |
|
The original transport port of the session endpoint that
belongs to the private network. If this is an ICMP session
then the value is the ICMP request ID.
|
| cnatSessionTransPrivatePort |
.1.3.6.1.4.1.9.10.77.1.2.5.1.9 |
|
The translated transport port of the session that lies in
the private network. The value of this object is equal to
that of the original transport port
(cnatSessionOrigPrivatePort) when there is no translation.
|
| cnatSessionOrigPublicAddr |
.1.3.6.1.4.1.9.10.77.1.2.5.1.10 |
|
The original IP address of the session endpoint that lies
in the public network.
|
| cnatSessionTransPublicAddr |
.1.3.6.1.4.1.9.10.77.1.2.5.1.11 |
|
The translated IP address of the session endpoint that
belongs to the public network. The value of this object
is equal to that of the original public IP Address
(cnatSessionOrigPublicAddr) when there is no
translation.
|
| cnatSessionOrigPublicPort |
.1.3.6.1.4.1.9.10.77.1.2.5.1.12 |
|
The original transport port of the session endpoint that
belongs to the public network. If this is an ICMP
session then the value contains the ICMP request ID.
|
| cnatSessionTransPublicPort |
.1.3.6.1.4.1.9.10.77.1.2.5.1.13 |
|
The translated transport port of the session endpoint
that belongs to the public network. The value of this
object is equal to that of the original transport port
(cnatSessionOrigPublicPort) when there is no
translation.
|
| cnatSessionCurrentIdletime |
.1.3.6.1.4.1.9.10.77.1.2.5.1.14 |
|
The time in one-hundredths of a second since a packet
belonging to this session was last detected.
|
| cnatSessionSecondBindId |
.1.3.6.1.4.1.9.10.77.1.2.5.1.15 |
|
The natBindId of the 'other' NAT binding incase of Twice
NAT. An instance of this object contains a valid value
only if the binding type for this session is TwiceNAT.
|
| cnatSessionInTranslate |
.1.3.6.1.4.1.9.10.77.1.2.5.1.16 |
|
The number of inbound packets that were translated by
this session.
|
| cnatSessionOutTranslate |
.1.3.6.1.4.1.9.10.77.1.2.5.1.17 |
|
The number of outbound packets that were translated by
this session.
|
| cnatProtocolStatsName |
.1.3.6.1.4.1.9.10.77.1.3.1.1.1 |
|
This object represents the protocol pertaining to which
statistics are reported.
|
| cnatProtocolStatsInTranslate |
.1.3.6.1.4.1.9.10.77.1.3.1.1.2 |
|
The number of inbound packets, pertaining to the protocol
identified by cnatProtocolStatsName, that underwent NAT.
|
| cnatProtocolStatsOutTranslate |
.1.3.6.1.4.1.9.10.77.1.3.1.1.3 |
|
The number of outbound packets, pertaining to the protocol
identified by cnatProtocolStatsName, that underwent NAT.
|
| cnatProtocolStatsRejectCount |
.1.3.6.1.4.1.9.10.77.1.3.1.1.4 |
|
The number of packets, pertaining to the protocol
identified by cnatProtocolStatsName, that had to be
rejected/dropped due to lack of resources. These
rejections could be due to session timeout, resource
unavailability etc.
|
| cnatAddrMapStatsConfName |
.1.3.6.1.4.1.9.10.77.1.3.2.1.1 |
|
The name of the configuration (from the cnatConfTable),
regarding which statistics are being reported. The
configuration name along with Map name uniquely
identifies an entry across both (static and dynamic)
Address Map tables.
|
| cnatAddrMapStatsMapName |
.1.3.6.1.4.1.9.10.77.1.3.2.1.2 |
|
The name of the Address Map (from the
cnatConfStaticAddrMapTable/cnatConfDynAddrMapTable),
regarding which statistics are being reported. The
configuration name along with Map name uniquely
identifies an entry across both (static and dynamic)
Address Map tables.
|
| cnatAddrMapStatsInTranslate |
.1.3.6.1.4.1.9.10.77.1.3.2.1.3 |
|
The number of inbound packets, pertaining to this address
map entry, that were translated.
|
| cnatAddrMapStatsOutTranslate |
.1.3.6.1.4.1.9.10.77.1.3.2.1.4 |
|
The number of outbound packets, pertaining to this
address map entry, that were translated.
|
| cnatAddrMapStatsNoResource |
.1.3.6.1.4.1.9.10.77.1.3.2.1.5 |
|
The number of packets, pertaining to this address map
entry, that were dropped due to lack of addresses in the
address pool identified by this address map. The value of
this object should always be zero in case of static
address map.
|
| cnatAddrMapStatsAddrUsed |
.1.3.6.1.4.1.9.10.77.1.3.2.1.6 |
|
The number of addresses, pertaining to this address map,
that are currently being used from the nat pool. The
value of this object is irrelevant if the address map in
question is a static address map.
|
| cnatInterfacePktsIn |
.1.3.6.1.4.1.9.10.77.1.3.3.1.1 |
|
Number of packets received on this interface that
were translated.
|
| cnatInterfacePktsOut |
.1.3.6.1.4.1.9.10.77.1.3.3.1.2 |
|
Number of translated packets that were sent out this
interface.
|
