CISCO-IMA-EXT-CAPABILITY device MIB details by Cisco

CISCO-IMA-EXT-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-IMA-EXT-CAPABILITY.

Vendor:	Cisco
Mib:	CISCO-IMA-EXT-CAPABILITY  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-IMA-EXT-CAPABILITY
--
-- AGENT-CAPABILITIES mib for CISCO-IMA-MIB
--
-- March 2002, Wayne W. Cai
-- Copyright(c) 2002 by Cisco Systems,Inc.
--
-- *****************************************************************

CISCO-IMA-EXT-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        MilliSeconds
                FROM IMA-MIB
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoImaExtCapability MODULE-IDENTITY
        LAST-UPDATED    "200203040000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                        Tel: +1 800 553-NETS

                E-mail: cs-wanatm@cisco.com"
DESCRIPTION
    "The Agent Capabilities for CISCO-IMA-MIB.

     - ciscoImaExtAxsmeCapabilityV3R0 is for 
       Enhanced ATM Switch Service Module(AXSM-E)."
           
REVISION    "200203040000Z"
DESCRIPTION
    "Initial version of this MIB module."

::= { ciscoAgentCapability  255 }

ciscoImaExtAxsmeCapabilityV3R0 AGENT-CAPABILITIES

PRODUCT-RELEASE "MGX8850 Release 3.0"
STATUS          current
DESCRIPTION     "Agent capabilities for CISCO-IMA-MIB
                 for AXSME Service Module in MGX8850 Series."

SUPPORTS        CISCO-IMA-MIB
INCLUDES        { ciscoImaGroupGroup, ciscoImaLinkGroup,
                  ciscoImaAlarmGroup, ciscoImaLinkMappingGroup }

VARIATION       cimaGrpAlarmType
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaLinkAlarmType
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaStuffAndCellIndication
DESCRIPTION     "Supported with limitation.
                 Agent only supports mandatory '000' and '001'
                 stuff events."

VARIATION       cimaGrpNumTxIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaGrpNumRxIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaGrpNumRxErrIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaGrpNumRxInvalidIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaGrpNumRxMissingIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaGrpNumTxMissingIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaLinkLifIntUpTime
SYNTAX          MilliSeconds (2500..2500)
ACCESS          read-only
DESCRIPTION     "Supported with limitation.
                 Agent only supports default 2500 milliseconds."

VARIATION       cimaLinkLifIntDownTime
SYNTAX          MilliSeconds (10000..10000)
ACCESS          read-only
DESCRIPTION     "Supported with limitation.
                 Agent only supports default 10000 milliseconds."

VARIATION       cimaLinkLodsIntUpTime
SYNTAX          MilliSeconds (2500..2500)
ACCESS          read-only
DESCRIPTION     "Supported with limitation.
                 Agent only supports default 2500 milliseconds."

VARIATION       cimaLinkLodsIntDownTime
SYNTAX          MilliSeconds (10000..10000)
ACCESS          read-only
DESCRIPTION     "Supported with limitation.
                 Agent only supports default 10000 milliseconds."

VARIATION       cimaLinkNumTxIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaLinkNumRxErrIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaLinkNumRxInvalidIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaLinkNumRxMissingIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

VARIATION       cimaLinkNumTxMissingIcpCells
ACCESS          not-implemented
DESCRIPTION     "Not Supported."

::= { ciscoImaExtCapability 1 }

END