CISCO-ISCSI-GW-MIB device MIB details by Cisco
CISCO-ISCSI-GW-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-ISCSI-GW-MIB.
| Vendor: | Cisco |
|---|---|
| Mib: | CISCO-ISCSI-GW-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ********************************************************************* -- CISCO-ISCSI-GW-MIB.my: iSCSI-FC Gateway Mib -- -- October 2002, Vinay Gaonkar -- -- Copyright (c) 2002,2003,2004 by cisco Systems, Inc. -- All rights reserved. -- -- ********************************************************************* CISCO-ISCSI-GW-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF RowStatus, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB InterfaceIndex,ifIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI ListIndexOrZero, ListIndex, CiscoPort FROM CISCO-TC FcNameId, FcNameIdOrZero, VsanIndex FROM CISCO-ST-TC ScsiName,ScsiLUNOrZero, ciscoScsiLuEntry FROM CISCO-SCSI-MIB cIscsiInstIndex, cIscsiNodeAttributesEntry, cIscsiInstanceAttributesEntry, cIscsiSessionAttributesEntry FROM CISCO-ISCSI-MIB FcList FROM CISCO-ZS-MIB; ciscoIscsiGwMIB MODULE-IDENTITY LAST-UPDATED "200411160000Z" ORGANIZATION "Cisco Systems Inc. " CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-san@cisco.com" DESCRIPTION "MIB module for monitoring and configuring iSCSI gateway functions. An iSCSI gateway represents FC (Fibre Channel) targets/initiators as iSCSI targets/initiators respectively and vice versa. It means that an iSCSI target/initiator is presented to the FC network as a virtual FC target/initiator which can be accessed by the real FC initiators or can access real FC targets, respectively. It is up to the gateway implementation how to represent the targets/initiators in each of the domains. For example, a gateway implementation may choose to represent multiple FC targets either as one iSCSI target or multiple iSCSI targets (one to one). Same applies to initiators also." REVISION "200411160000Z" DESCRIPTION "Added new objects iscsiIfTcpRndTrpTimeEst. Added new group cigIscsiIfGroupRev4. Added new object iscsiIfTcpLocalTcpPort. Deprecated iscsiIfTcpLocalPort. Added a new compliance ciscoiScsiGwMIBCompliance4." REVISION "200312080000Z" DESCRIPTION "Added new objects iscsiIfIntrIdentificationMode, iscsiIntrIdentificationMode and iscsiInitiatorIdleTimeout. Added a new compliance ciscoiScsiGwMIBCompliance3." REVISION "200311140000Z" DESCRIPTION "Added new objects iscsiAuthMethod,iscsi2FcNodeAuthUser, iscsiIfForwardingMode, and iscsiIfIntrProxyMode. Added new compliance ciscoiScsiGwMIBCompliance1. Added new table iscsiGigEIfTable and new comformance group cigIscsiGigEIfGroup. Added new objects fc2IscsiNodeTrespassMode and fc2IscsiNodeRevertToPrimaryPort to fc2IscsiNodeTable." REVISION "200308180000Z" DESCRIPTION "Added a new table iscsiSessionAttributesExtTable. Added iscsiIfTable. Added scsiLuExtRemoteSecLun to scsiLyExtTable. Added new object iscsi2FcNodeFcAddrAssignment to iscsi2FcNodeTable. Changed MAX-ACCESS of iscsi2FcNodeDiscovered to read-create. Added a MIN-ACCESS to to this object to be backward compatible. Added new conformance groups cigLuConfigurationGroupRev1 and cigConfigurationGroupRev1. Also added a new compliance ciscoiScsiGwMIBCompliance1." REVISION "200305220000Z" DESCRIPTION "Fixed the MIB compile errors during MIB release." REVISION "200304100000Z" DESCRIPTION "Changed the syntax of CIscsiTargetDomains to BITS from INTEGER. Added a new table iscsiImprtExprtTgtsConfTable instead of the two scalar objects iscsiImportTargets and iscsiExportTargets. Added two new objects iscsi2FcNodeDiscovered and fc2IscsiNodeDiscovered to iscsi2FcNodeTable and fc2IscsiNodeTable respectively. Added new object fc2IscsiNodeAllIntrAccessAllowed. Changed the range of iscsi2FcPortNumFCAddr to 0-64 from 0-255." REVISION "200302110000Z" DESCRIPTION "Added an enumeration 'none' to the CIscsiTargetDomains TC. Changed the DESCRIPTION of iscsiImportTargets and iscsiExportTargets to reflect this change." REVISION "200210050000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 317 } ciscoiScsiGwMIBNotifications OBJECT IDENTIFIER ::= { ciscoIscsiGwMIB 0 } ciscoiScsiGwMIBObjects OBJECT IDENTIFIER ::= { ciscoIscsiGwMIB 1 } ciscoiScsiGwMIBConformance OBJECT IDENTIFIER ::= { ciscoIscsiGwMIB 2 } ciScsiConfig OBJECT IDENTIFIER ::= { ciscoiScsiGwMIBObjects 1 } ciScsiStatistics OBJECT IDENTIFIER ::= { ciscoiScsiGwMIBObjects 2 } -- Textual Conventions CIscsiTargetDomains ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value which identifies zero or more target domains. One bit is defined for each defined domain, and a domain is identified if its bit is set." SYNTAX BITS { fibreChannel (0) } CIscsiNodeRoles ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Role of the iSCSI node. A node can operate as in one or both of two roles: a target role and/or an initiator role. An initiator starts a iSCSI session with a target to to do any iSCSI transaction." SYNTAX BITS { targetTypeNode(0), initiatorTypeNode(1) } IscsiName ::= TEXTUAL-CONVENTION DISPLAY-HINT "223a" STATUS current DESCRIPTION "This data type is a local refinement of the SnmpAdminString used to define an iSCSI Name." REFERENCE "iSCSI Protocol Specification, Section 3.2.6, iSCSI Names." SYNTAX OCTET STRING (SIZE(16..223)) IscsiAuthMethod ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The authentication method." SYNTAX BITS { none (0), chap (1) } CIscsiIntrIdentificationMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The initiator identification mode. An initiator is identified either by its iSCSI name (name) or by its IP address (ipaddress)." SYNTAX INTEGER { name (1), ipaddress (2) } -- the iSCSI Configuration group iscsiImprtExprtTgtsConfTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiImprtExprtTgtsConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the configuration of automatic importing and exporting of targets into and from iSCSI domain. If a targets is discovered in other domains, it is automatically imported if it is configured for automatic importing. Similarly, if an iSCSI target is discovered, it is automatically exported to other domains if it is configured to do so." ::= { ciScsiConfig 1 } iscsiImprtExprtTgtsConfEntry OBJECT-TYPE SYNTAX IscsiImprtExprtTgtsConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information on configuration of importing/exporting of the targets into/from iSCSI domain." AUGMENTS {cIscsiInstanceAttributesEntry} ::= { iscsiImprtExprtTgtsConfTable 1 } IscsiImprtExprtTgtsConfEntry ::= SEQUENCE { iscsiImprtExprtTgtsConfImport CIscsiTargetDomains, iscsiImprtExprtTgtsConfExport CIscsiTargetDomains } iscsiImprtExprtTgtsConfImport OBJECT-TYPE SYNTAX CIscsiTargetDomains MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies zero or more target domains. If a target domain is identified, then all the targets in that domain are automatically imported into iSCSI domain. Note that a target is not imported if it is already in the iSCSI domain. If value of this object is '00'H, then no targets are automatically imported." DEFVAL { {} } ::= { iscsiImprtExprtTgtsConfEntry 1 } iscsiImprtExprtTgtsConfExport OBJECT-TYPE SYNTAX CIscsiTargetDomains MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies zero or more target domains. If a target domain is identified, then all the targets in the iSCSI domain are automatically exported to that domain. Note that only the real iSCSI targets are exported. No targets are exported if the value of the object is '00'H." DEFVAL { {} } ::= { iscsiImprtExprtTgtsConfEntry 2 } iscsiAuthMethod OBJECT-TYPE SYNTAX IscsiAuthMethod MAX-ACCESS read-write STATUS current DESCRIPTION "The global authentication method for iSCSI." DEFVAL { {} } ::= { ciScsiConfig 2 } -- -- iscsi2FcNodeTable -- iscsi2FcNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF Iscsi2FcNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all the nodes in the iSCSI domain which are currently represented in the FC domain. Entries in this table are automatically created when an iSCSI initiator logs (starts a session) into a target or an iSCSI target is discovered. Entries are also created when targets are exported from the iSCSI domain into FC. Entries in this table are automatically removed when an iSCSI initiator logs out of all targets or an iSCSI target disappears. Entries also can be created and deleted using the iscsi2FcNodeRowStatus object. If the entry created in this table exposes either iSCSI initiator or iSCSI target or both from the local device, then a entry has to be created implicitly by the agent in the cIscsiNodeAttributesTable when an entry is created in this table. A row in this table can not be made 'active' until values are explicitly provided for that row's instances of iscsi2FcNodeName and iscsi2FcNodeRole. The following objects cannot be modified when the iscsi2FcNodeRowStatus is 'active' : iscsi2FcNodeName iscsi2FcNodeRole To modify the above objects, the entry must be deleted and re-created with new values of above objects. Every node in this table is associated with a iSCSI instance which is uniquely identified by cIscsiInstIndex." ::= { ciScsiConfig 3 } iscsi2FcNodeEntry OBJECT-TYPE SYNTAX Iscsi2FcNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry representing an iSCSI node which is presented as a FC node to the FC domain." INDEX { cIscsiInstIndex, iscsi2FcNodeIndex } ::= { iscsi2FcNodeTable 1 } Iscsi2FcNodeEntry ::= SEQUENCE { iscsi2FcNodeIndex Unsigned32, iscsi2FcNodeName IscsiName, iscsi2FcNodeRole CIscsiNodeRoles, iscsi2FcNodePersistentFCAddr TruthValue, iscsi2FcPortPersistentFCAddr TruthValue, iscsi2FcPortNumFCAddr Unsigned32, iscsi2FcNodeFCAddr FcNameIdOrZero, iscsi2FcPortFCAddrListIndex ListIndexOrZero, iscsi2FcNodeVsanList2k FcList, iscsi2FcNodeVsanList4k FcList, iscsi2FcNodeDiscovered TruthValue, iscsi2FcNodeRowStatus RowStatus, iscsi2FcNodeFcAddrAssignment INTEGER, iscsi2FcNodeAuthUser SnmpAdminString } iscsi2FcNodeIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer value, which identifies an iSCSI node in a FC domain." ::= { iscsi2FcNodeEntry 1 } iscsi2FcNodeName OBJECT-TYPE SYNTAX IscsiName MAX-ACCESS read-create STATUS current DESCRIPTION "A character string that is a globally unique identifier for the node represented by this entry. The node name is independent of the location of the node, and can be resolved into a set of addresses through various discovery services." ::= { iscsi2FcNodeEntry 2 } iscsi2FcNodeRole OBJECT-TYPE SYNTAX CIscsiNodeRoles MAX-ACCESS read-create STATUS current DESCRIPTION "The role of the node represented by this entry. Note that a gateway implementation may choose not to allow a node to operate in both roles." ::= { iscsi2FcNodeEntry 3 } iscsi2FcNodePersistentFCAddr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates if the node FC Address (iscsi2FcNodeFCAddr) is made persistent or not. If this object is 'true', then the same FC address is assigned to the node if it were to be represented again in the FC domain with the same node name. Note that the node FC address is either automatically assigned or manually configured." ::= { iscsi2FcNodeEntry 4 } iscsi2FcPortPersistentFCAddr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates if the port FC addresses (given by iscsi2FcPortFCAddrListIndex) of this node is made persistent or not. If this object is 'true', then the same FC address is assigned to the ports of the node if it were to be represented again in the FC domain with the same node name. Note that the port FC address is either automatically assigned or manually configured. If this object is 'false', then iscsi2FcPortNumFCAddr and iscsi2FcPortFCAddrListIndex are not valid as port FC addresses are dynamically assigned/released." ::= { iscsi2FcNodeEntry 5 } iscsi2FcPortNumFCAddr OBJECT-TYPE SYNTAX Unsigned32 (0..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of persistent port FC addresses that are automatically assigned to ports associated with this node. The fcAddressListTable contains the FC addresses that are assigned for the node represented by this entry. If the value of this object is 0, then the port FC addresses are not automatically assigned. Otherwise : - the entries in the fcAddressListTable corresponding to this automatic assignment as indicated by the object iscsi2FcPortFCAddrListIndex cannot be either modified or deleted. - new entries cannot be created in the fcAddressListTable with fcAddressListIndex which is equal to corresponding iscsi2FcPortFCAddrListIndex for this instance. - the corresponding iscsi2FcPortFCAddrListIndex cannot be changed. If the value of the object iscsi2FcPortPersistentFCAddr is 'false', then this object cannot be modified." ::= { iscsi2FcNodeEntry 6 } iscsi2FcNodeFCAddr OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The persistent FC address of the node. If this object is zero-length and iscsi2FcNodePersistentFCAddr is 'true' then the FC address of the node represented by this entry is automatically assigned and made persistent. If this object is non-zero length and iscsi2FcNodePersistentFCAddr is 'true', then this value is always used as FC address of the node represented by this entry. If iscsi2FcNodePersistentFCAddr is 'false, this object is not valid. The FC address for the node represented by this entry is dynamically assigned/released when the node represented by this entry is created/destroyed." ::= { iscsi2FcNodeEntry 7 } iscsi2FcPortFCAddrListIndex OBJECT-TYPE SYNTAX ListIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The index of a list in the fcAddressListTable which lists all the FC port addresses associated with this node. The object value of the iscsi2FcPortPersistentFCAddr indicates if the addresses are persistent or not. Note that this object cannot be modified if the corresponding value of iscsi2FcPortNumFCAddr is non-zero. If the value of the object iscsi2FcPortPersistentFCAddr is 'false', then this object cannot be modified." ::= { iscsi2FcNodeEntry 8 } iscsi2FcNodeVsanList2k OBJECT-TYPE SYNTAX FcList MAX-ACCESS read-create STATUS current DESCRIPTION "The list of VSANs the node represented by this entry can access. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSANs 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, is represented by a single bit within the value of this object. The corresponding VSAN is allowed on the node represented by this entry if and only if that bit has a value of '1'. If this object has a value which is less than 256 bytes long, then the VSANs which are not represented are not considered to be in this list. If this object is a zero-length string, the node represented by this entry can access only the default VSAN." DEFVAL {''H} ::= { iscsi2FcNodeEntry 9 } iscsi2FcNodeVsanList4k OBJECT-TYPE SYNTAX FcList MAX-ACCESS read-create STATUS current DESCRIPTION "The list of VSANs the node represented by this entry can access. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2047 through 2054, the second octet specifying VSANs 2055 through 2062, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, is represented by a single bit within the value of this object. The corresponding VSAN is allowed on the node represented by this entry if and only if that bit has a value of '1'. If this object has a value which is less than 256 bytes long, then the VSANs which are not represented are not considered to be in the list. If this object is a zero-length string, the node represented by this entry can access only the default VSAN." DEFVAL {''H} ::= { iscsi2FcNodeEntry 10 } iscsi2FcNodeDiscovered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This objects indicates if the node represented by this entry was either automatically discovered or configured manually. If the value of this object is 'true', then the node represented by this entry is automatically discovered. If it is 'false', then the node represented by this entry was manually configured. An auto discovered node can be made manually configured node by setting this object to 'false'. Note that setting to 'false' when current value of the object is 'false' results in error. Also, object cannot be set to 'true'." ::= { iscsi2FcNodeEntry 11 } iscsi2FcNodeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this row." ::= { iscsi2FcNodeEntry 12 } iscsi2FcNodeFcAddrAssignment OBJECT-TYPE SYNTAX INTEGER { auto (1), manual (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies how the FC address of this node is assigned. If set to 'auto', the FC address is automatically assigned to this node. If it is 'manual', then the FC address has to be configured manually. An auto assigned node FC address can be made manually configured by setting this object to 'manual' and vice versa." DEFVAL { auto } ::= { iscsi2FcNodeEntry 13 } iscsi2FcNodeAuthUser OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the user which is to be sent with iSCSI authentication to the target, if authentication is enabled (iscsiIfAuthMethod other than 'none') interface on which carries session between initiator and target." DEFVAL { ''H } ::= { iscsi2FcNodeEntry 14 } -- fc2IscsiNodeTable fc2IscsiNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF Fc2IscsiNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all the FC nodes which the gateway presents as iSCSI nodes to the iSCSI domain. Entries in this table are automatically created when FC nodes are discovered. Entries in this table are automatically removed when FC nodes go offline. Entries also can be created/deleted using the fc2IscsiNodeRowStatus object. An entry can be created by to configure a node statically instead of allowing it to be discovered. A row in this table can not be made 'active' until values are explicitly provided for that row's instances of fc2IscsiNodeName and fc2IscsiNodeRole. The following objects cannot be modified when the fc2IscsiNodeRowStatus is 'active' : - fc2IscsiNodeRole - fc2IscsiNodeName To modify the above objects, the entry must be deleted and re-created with new values of above objects. To create an iSCSI target from whole a FC target, use fc2ScsiPortFCAddrListIndex. To create an iSCSI target from Logical Units on the FC targets, create an entry in this table. And then create an entry (s) in the scsiLuExtTable using fc2IscsiNodeName of an entry in this table as scsiLuExtLocalTargetAddress value." ::= { ciScsiConfig 4 } fc2IscsiNodeEntry OBJECT-TYPE SYNTAX Fc2IscsiNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry representing a FC node which is presented as an iSCSI node to the iSCSI domain." AUGMENTS {cIscsiNodeAttributesEntry} ::= { fc2IscsiNodeTable 1 } Fc2IscsiNodeEntry ::= SEQUENCE { fc2IscsiNodeRole CIscsiNodeRoles, fc2IscsiNodeName IscsiName, fc2IscsiPortFCAddrListIndex ListIndexOrZero, fc2IscsiNodePermitListIndex ListIndexOrZero, fc2IscsiNodeAdvIntfListIndex ListIndexOrZero, fc2IscsiNodeAllIntrAccessAllowed TruthValue, fc2IscsiNodeDiscovered TruthValue, fc2IscsiNodeRowStatus RowStatus, fc2IscsiNodeTrespassMode TruthValue, fc2IscsiNodeRevertToPrimaryPort TruthValue } fc2IscsiNodeRole OBJECT-TYPE SYNTAX CIscsiNodeRoles MAX-ACCESS read-create STATUS current DESCRIPTION "Role of the node represented by this entry. Note that a gateway implementation may choose not to allow a node to operate in both roles." ::= { fc2IscsiNodeEntry 1 } fc2IscsiNodeName OBJECT-TYPE SYNTAX IscsiName MAX-ACCESS read-create STATUS current DESCRIPTION "The iSCSI name of the node represented by this entry." ::= { fc2IscsiNodeEntry 2 } fc2IscsiPortFCAddrListIndex OBJECT-TYPE SYNTAX ListIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The index of a list in the fcAddressListTable which lists all the FC node addresses associated with the node represented by this entry. Use this object to represent the whole FC targets." ::= { fc2IscsiNodeEntry 3 } fc2IscsiNodePermitListIndex OBJECT-TYPE SYNTAX ListIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The index of a list in the iscsiNodeNameListTable which lists all the iSCSI nodes that are permitted to access the node represented by this entry. If fc2IscsiNodeAllIntrAccessAllowed is 'false' and the value of this object is 0, then no initiators are allowed to access this target." ::= { fc2IscsiNodeEntry 4 } fc2IscsiNodeAdvIntfListIndex OBJECT-TYPE SYNTAX ListIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The index of a list in the nodeAdvIntfListTable which lists all the interfaces on which the node represented by this entry could be advertised." ::= { fc2IscsiNodeEntry 5 } fc2IscsiNodeAllIntrAccessAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates if all the initiators can access the target represented by this entry. If this object is 'true', then all the initiators can access this target even those which are not in the initiator permit list (fc2IscsiNodePermitListIndex) of the target represented by this entry. If this object is false, then only initiators which are in the permit list are allowed access to the target represented by this entry. Note that this object is valid only if the role of the node represented by this entry is 'targetTypeNode'." DEFVAL { false } ::= { fc2IscsiNodeEntry 6 } fc2IscsiNodeDiscovered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This objects indicates if the node represented by this entry was either automatically discovered or configured manually. If the value of this object is 'true', then the node represented by this entry is automatically discovered. If it is 'false', then the node represented by this entry was manually configured." ::= { fc2IscsiNodeEntry 7 } fc2IscsiNodeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this row." ::= { fc2IscsiNodeEntry 8 } fc2IscsiNodeTrespassMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The trespass mode for this node. Every iSCSI target represents one or more port(s) on the FC target (fc2ScsiPortFCAddrListIndex). If this object is 'true', the node instructs the FC node to present all LUN I/O requests to secondary port (fcSecondaryAddress) if the primary port (fcAddress) is down. Note that this object is valid only if fc2IscsiNodeRole is 'targetTypeNode'." DEFVAL { false } ::= { fc2IscsiNodeEntry 9 } fc2IscsiNodeRevertToPrimaryPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates if it is required to revert back to primary port the FC target if it comes back online. Every iSCSI target represent one or more port(s) on the FC target (fc2ScsiPortFCAddrListIndex). Only one of the ports is the primary port. If the primary port goes down, the designated secondary port takes over. This objects indicates if the primary port has to be used used once it comes back up. Note that this object is valid only if fc2IscsiNodeRole is 'targetTypeNode'." DEFVAL { false } ::= { fc2IscsiNodeEntry 10 } -- fcAddressListTable fcAddressListTable OBJECT-TYPE SYNTAX SEQUENCE OF FcAddressListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of FC addresses. Entries in this table are automatically created/deleted when the FC addresses are automatically assigned/released to/from the entities which are using this table to create FC address lists. Entries in this table are also created/deleted using fcAddressRowStatus. A row in this table can not be made 'active' until a value is explicitly provided for that row's instances of fcAddress. Also, the following object cannot be modified when 'fcAddressRowStatus' is 'active' : - fcAddress To modify the above object, the entry must be deleted and re-created with new value of above object." ::= { ciScsiConfig 5 } fcAddressListEntry OBJECT-TYPE SYNTAX FcAddressListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry information about a FC address which is part of a list. Entries with same fcAddressListIndex form a list." INDEX { fcAddressListIndex, fcAddressIndex } ::= { fcAddressListTable 1 } FcAddressListEntry ::= SEQUENCE { fcAddressListIndex ListIndex, fcAddressIndex Unsigned32, fcAddress FcNameId, fcSecondaryAddress FcNameIdOrZero, fcAddressRowStatus RowStatus } fcAddressListIndex OBJECT-TYPE SYNTAX ListIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of a list of FC addresses." ::= { fcAddressListEntry 1 } fcAddressIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer value, which identifies a FC address." ::= { fcAddressListEntry 2 } fcAddress OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-create STATUS current DESCRIPTION "The FC address for this entry." ::= { fcAddressListEntry 3 } fcSecondaryAddress OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The secondary FC address for this entry. This is the FC address used if the 'fcAddress' cannot be reached. Note that every 'fcAddress' may not need a secondary FC Address." DEFVAL { ''H } ::= { fcAddressListEntry 4 } fcAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this row." ::= { fcAddressListEntry 5} -- nodeNameListTable iscsiNodeNameListTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiNodeNameListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of iSCSI node names. A row in this table can not be made 'active' until a value is explicitly provided for that row's instances of iscsiNodeName. Also, the following objects cannot be modified when 'iscsiNodeNameRowStatus' is 'active' : - iscsiNodeName To modify the above object, the entry must be deleted and re-created with new value of above object." ::= { ciScsiConfig 6 } iscsiNodeNameListEntry OBJECT-TYPE SYNTAX IscsiNodeNameListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry information about an iSCSI node name which is part of a list. Entries with same nodeNameListIndex form a list." INDEX { iscsiNodeNameListIndex, iscsiNodeNameIndex } ::= { iscsiNodeNameListTable 1 } IscsiNodeNameListEntry ::= SEQUENCE { iscsiNodeNameListIndex ListIndex, iscsiNodeNameIndex Unsigned32, iscsiNodeName IscsiName, iscsiNodeNameRowStatus RowStatus } iscsiNodeNameListIndex OBJECT-TYPE SYNTAX ListIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of a list of iSCSI node names." ::= { iscsiNodeNameListEntry 1 } iscsiNodeNameIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer value, which identifies a iSCSI node name." ::= { iscsiNodeNameListEntry 2 } iscsiNodeName OBJECT-TYPE SYNTAX IscsiName MAX-ACCESS read-create STATUS current DESCRIPTION "The iSCSI node name." ::= { iscsiNodeNameListEntry 3 } iscsiNodeNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this row." ::= { iscsiNodeNameListEntry 4 } -- nodeAdvIntfListTable nodeAdvIntfListTable OBJECT-TYPE SYNTAX SEQUENCE OF NodeAdvIntfListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of advertised interface list. A FC node represented in the iSCSI domain as an iSCSI node is advertised only on the interfaces which are allowed advertised interface list of the iSCSI node. A row in this table can not be made 'active' until a value is explicitly provided for that row's instances of nodeAdvIntfIfIndex. Also, the following object cannot be modified when 'nodeAdvIntfRowStatus' is 'active' : - nodeAdvIntfIfIndex To modify the above object, the entry must be deleted and re-created with new value of above object." ::= { ciScsiConfig 7 } nodeAdvIntfListEntry OBJECT-TYPE SYNTAX NodeAdvIntfListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry with containing ifIndex of an interface which is part of the interface list. Entries with same nodeAdvIntfListIndex form a list." INDEX { nodeAdvIntfListIndex, nodeAdvIntfIndex} ::= { nodeAdvIntfListTable 1 } NodeAdvIntfListEntry ::= SEQUENCE { nodeAdvIntfListIndex Unsigned32, nodeAdvIntfIndex Unsigned32, nodeAdvIntfIfIndex InterfaceIndex, nodeAdvIntfIfRowStatus RowStatus } nodeAdvIntfListIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of a list of advertized interface list." ::= { nodeAdvIntfListEntry 1 } nodeAdvIntfIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of an interface entry." ::= { nodeAdvIntfListEntry 2 } nodeAdvIntfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the interface." ::= { nodeAdvIntfListEntry 3 } nodeAdvIntfIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this row." ::= { nodeAdvIntfListEntry 4 } -- extension to the scsiLuTable from SCSI-MIB. scsiLuExtTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiLuExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension of the scsiLuTable to support creation of iSCSI virtual targets from LUs on remote FC targets. To create iSCSI virtual targets from a set of LUs on FC targets, entries needs to be created in this table. The iSCSI targets can be created in different ways. For example: - multiple iSCSI targets can be created from either one LU or a subset of LUs from a single FC target device. - a single iSCSI target can be created from LUs of multiple FC target devices. Note that a gateway implementation may choose to support only a subset of these features. To create a virtual iSCSI target from LUs on the remote FC targets, create an entry (s) in this table with local LUs to map to remote LUs and value of scsiLuExtLocalTargetAddress to same as the iSCSI node name of the virtual iSCSI node being created. A row in this table can not be made 'active' until a value is explicitly provided for that row's instances of following objects : - scsiLuExtRemotePortFcAddress - scsiLuExtLocalTargetAddress - scsiLuExtLocalLun - scsiLuExtRemoteLun Also, the following objects cannot be modified when 'scsiLuExtRowStatus 'active' : - scsiLuExtRemotePortFcAddress - scsiLuExtLocalTargetAddress - scsiLuExtLocalLun - scsiLuExtRemoteLun To modify the above objects, the entry must be deleted and re-created with new values of above objects." ::= { ciScsiConfig 8 } scsiLuExtEntry OBJECT-TYPE SYNTAX ScsiLuExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry representing a LU." AUGMENTS { ciscoScsiLuEntry } ::= { scsiLuExtTable 1 } ScsiLuExtEntry ::= SEQUENCE { scsiLuExtRemotePortFcAddress FcNameId, scsiLuExtRemotePortSecFcAddress FcNameIdOrZero, scsiLuExtLocalTargetAddress ScsiName, scsiLuExtRemoteLun ScsiLUNOrZero, scsiLuExtLocalLun ScsiLUNOrZero, scsiLuExtRowStatus RowStatus, scsiLuExtRemoteSecLun ScsiLUNOrZero } scsiLuExtRemotePortFcAddress OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-create STATUS current DESCRIPTION "The FC address of the remote Fibre Channel port via which the remote LU (scsiLuExtRemoteLun) is accessed." ::= { scsiLuExtEntry 1 } scsiLuExtRemotePortSecFcAddress OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The secondary FC address of the remote Fibre Channel port via which the remote LU (scsiLuExtRemoteSecLun) is accessed." DEFVAL { ''H } ::= { scsiLuExtEntry 2 } scsiLuExtLocalTargetAddress OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the SCSI name of the local SCSI target through which this LU (scsiLuExtLocalLun) can be accessed. The format of a SCSI name is dependent on the type of transport used to access the target. For example, when the local SCSI target is accessible via iSCSI, then this object contains the iSCSI node name of the local target." ::= { scsiLuExtEntry 3 } scsiLuExtRemoteLun OBJECT-TYPE SYNTAX ScsiLUNOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The Logical Unit Number of the remote LU." ::= { scsiLuExtEntry 4 } scsiLuExtLocalLun OBJECT-TYPE SYNTAX ScsiLUNOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The configured default Logical Unit Number of this LU." ::= { scsiLuExtEntry 5 } scsiLuExtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this row." ::= { scsiLuExtEntry 6 } scsiLuExtRemoteSecLun OBJECT-TYPE SYNTAX ScsiLUNOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The Logical Unit Number of the remote LU corresponding to FC address scsiLuExtRemotePortSecFcAddress." ::= { scsiLuExtEntry 7 } -- iSCSI interface configuration iscsiIfTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of iSCSI interfaces." ::= { ciScsiConfig 9 } iscsiIfEntry OBJECT-TYPE SYNTAX IscsiIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about an iSCSI interface." INDEX { ifIndex } ::= { iscsiIfTable 1 } IscsiIfEntry ::= SEQUENCE { iscsiIfTcpKeepAliveTimeout Unsigned32, iscsiIfTcpMaxBandwidth Unsigned32, iscsiIfTcpMaxRetransmissions Unsigned32, iscsiIfTcpMinRetransmitTime Unsigned32, iscsiIfTcpPMTUEnable TruthValue, iscsiIfTcpQOS Unsigned32, iscsiIfTcpSACKEnable TruthValue, iscsiIfTcpSendBufferSize Unsigned32, iscsiIfTcpMinBandwidth Unsigned32, iscsiIfTcpPMTUResetTimeout Unsigned32, iscsiIfTcpLocalPort CiscoPort, iscsiIfForwardingMode INTEGER, iscsiIfIntrProxyMode TruthValue, iscsiIfIntrProxyModeNodeFcAddr FcNameIdOrZero, iscsiIfIntrProxyModePortFcAddr FcNameIdOrZero, iscsiIfIntrProxyModeFcAddrAsgnmt INTEGER, iscsiIfIntrIdentificationMode CIscsiIntrIdentificationMode, iscsiIfTcpRndTrpTimeEst Unsigned32, iscsiIfTcpLocalTcpPort CiscoPort } iscsiIfTcpKeepAliveTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..7200) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP Keep alive timeout for this iSCSI interface. If the value is 0, the keep-alive timeout feature is disabled." ::= { iscsiIfEntry 1 } iscsiIfTcpMaxBandwidth OBJECT-TYPE SYNTAX Unsigned32 (1000..1000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP maximum bandwidth for this iSCSI interface." ::= { iscsiIfEntry 2 } iscsiIfTcpMaxRetransmissions OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP maximum retransmissions for this iSCSI interface." ::= { iscsiIfEntry 3 } iscsiIfTcpMinRetransmitTime OBJECT-TYPE SYNTAX Unsigned32 (250..5000) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP minimum restransmit time for this iSCSI interface." ::= { iscsiIfEntry 4 } iscsiIfTcpPMTUEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This objects indicates if the Path MTU discovery option is enabled or not for this iSCSI interface." REFERENCE "For more information on PMTU, refer RFC 1191." ::= { iscsiIfEntry 5 } iscsiIfTcpQOS OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP QOS code point for this iSCSI interface." REFERENCE "RFC 2474, RFC 2780." ::= { iscsiIfEntry 6 } iscsiIfTcpSACKEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the Selective Acknowledgement (SACK) option is enabled or not for this iSCSI interface." REFERENCE "For more information on SACK, refer RFC 2018, RFC 2883." ::= { iscsiIfEntry 7 } iscsiIfTcpSendBufferSize OBJECT-TYPE SYNTAX Unsigned32 (0..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP send buffer size for this iSCSI interface." ::= { iscsiIfEntry 8 } iscsiIfTcpMinBandwidth OBJECT-TYPE SYNTAX Unsigned32 (1000..1000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP minimum bandwidth for this iSCSI interface." ::= { iscsiIfEntry 9 } iscsiIfTcpPMTUResetTimeout OBJECT-TYPE SYNTAX Unsigned32 (60..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout after which the PMTU resets to original value on this interface." ::= { iscsiIfEntry 10 } iscsiIfTcpLocalPort OBJECT-TYPE SYNTAX CiscoPort MAX-ACCESS read-only STATUS deprecated --superceded by iscsiIfTcpLocalTcpPort DESCRIPTION "The local TCP port of this interface." ::= { iscsiIfEntry 11 } iscsiIfForwardingMode OBJECT-TYPE SYNTAX INTEGER { passThrough (1), storeAndForward (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The forwarding mode of this interface." ::= { iscsiIfEntry 12 } iscsiIfIntrProxyMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The initiator proxy mode for this interface. If this object is 'true', then all the initiators coming on this interface would use the initiator configuration provided by this interface. The initiator configuration include port WWN and node WWN." ::= { iscsiIfEntry 13 } iscsiIfIntrProxyModeNodeFcAddr OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "The Node FC address used by the initiators on this interface when the initiator proxy mode is on (iscsiIfIntrProxyMode equal to 'true')." ::= { iscsiIfEntry 14 } iscsiIfIntrProxyModePortFcAddr OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "The Port FC address used by the initiators on this interface when the initiator proxy mode is on (iscsiIfIntrProxyMode equal to 'true')." ::= { iscsiIfEntry 15 } iscsiIfIntrProxyModeFcAddrAsgnmt OBJECT-TYPE SYNTAX INTEGER { auto (1), manual (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This objects tells how the initiator proxy mode FC addresses (iscsiIfIntrProxyModeNodeFcAddr and iscsiIfIntrProxyModePortFcAddr) are assigned. If value of this object is 'auto', then the FC addresses are automatically assigned. If it is 'manual', then they have to be manually configured." ::= { iscsiIfEntry 16 } iscsiIfIntrIdentificationMode OBJECT-TYPE SYNTAX CIscsiIntrIdentificationMode MAX-ACCESS read-write STATUS current DESCRIPTION "This objects indicates how the initiator is identified on this interface, either by its iSCSI name (name) or by its IP address (ipaddress)." ::= { iscsiIfEntry 17 } iscsiIfTcpRndTrpTimeEst OBJECT-TYPE SYNTAX Unsigned32 (0..300000) UNITS "microseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This is an estimate of the round trip delay of the network pipe used for the B-D product computation, which lets us derive the TCP receive window to advertise." ::= { iscsiIfEntry 18 } iscsiIfTcpLocalTcpPort OBJECT-TYPE SYNTAX CiscoPort MAX-ACCESS read-write STATUS current DESCRIPTION "The local TCP port of this interface." ::= { iscsiIfEntry 19 } -- -- iSCSI configuration for GigE interfaces -- iscsiGigEIfTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiGigEIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Gigabit Ethernet (GigE) interfaces. It contains iSCSI-specific configuration objects for the GigE interface." ::= { ciScsiConfig 10 } iscsiGigEIfEntry OBJECT-TYPE SYNTAX IscsiGigEIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about a GigE interface." INDEX { ifIndex } ::= { iscsiGigEIfTable 1 } IscsiGigEIfEntry ::= SEQUENCE { iscsiGigEIfAuthMethod IscsiAuthMethod, iscsiGigEIfIsnsServerProfileName SnmpAdminString, iscsiGigEIfIscsiSessions Unsigned32 } iscsiGigEIfAuthMethod OBJECT-TYPE SYNTAX IscsiAuthMethod MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication method for this interface." ::= { iscsiGigEIfEntry 1 } iscsiGigEIfIsnsServerProfileName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The iSNS server profile name for this interface. The iSNS server profiles are defined in cIsnsClntServerProfileTable from CISCO-ISNS-CLIENT-MIB." ::= { iscsiGigEIfEntry 2 } iscsiGigEIfIscsiSessions OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of iSCSI sessions running over this interface." ::= { iscsiGigEIfEntry 3 } -- -- Gateway idle timeout -- iscsiInitiatorIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time for which the gateway (representing a FC target) waits from the time of last iSCSI session to a iSCSI initiator went down, before purging the information about that iSCSI initiator." ::= { ciScsiConfig 11 } iscsiIntrIdentificationMode OBJECT-TYPE SYNTAX CIscsiIntrIdentificationMode MAX-ACCESS read-write STATUS current DESCRIPTION "This objects indicates how the initiator is identified on local device, either by its iSCSI name (name) or by its IP address (ipaddress)." ::= { ciScsiConfig 12 } -- -- Status and Statistics -- iscsiSessionAttributesExtTable OBJECT-TYPE SYNTAX SEQUENCE OF IscsiSessionAttributesExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects which provide more information about iSCSI sessions which are not in cIscsiSessionAttributesTable." ::= { ciScsiStatistics 1 } iscsiSessionAttributesExtEntry OBJECT-TYPE SYNTAX IscsiSessionAttributesExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about an iSCSI session which is not in cIscsiSessionAttributesEntry." AUGMENTS {cIscsiSessionAttributesEntry} ::= { iscsiSessionAttributesExtTable 1 } IscsiSessionAttributesExtEntry ::= SEQUENCE { iscsiSsnVsan VsanIndex } iscsiSsnVsan OBJECT-TYPE SYNTAX VsanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The vsan to which this session belongs to." ::= { iscsiSessionAttributesExtEntry 1 } -- Conformance ciscoiScsiGwMIBCompliances OBJECT IDENTIFIER ::= { ciscoiScsiGwMIBConformance 1 } ciscoiScsiGwMIBGroups OBJECT IDENTIFIER ::= { ciscoiScsiGwMIBConformance 2 } ciscoiScsiGwMIBCompliance MODULE-COMPLIANCE STATUS deprecated -- superceeded by -- ciscoiScsiGwMIBCompliance1 DESCRIPTION "The compliance statement for entities which implement the CISCO-ISCSI-GW-MIB." MODULE MANDATORY-GROUPS { cigConfigurationGroup } GROUP cigLuConfigurationGroup DESCRIPTION "Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets." OBJECT iscsi2FcNodeRole SYNTAX BITS { initiatorTypeNode (1) } DESCRIPTION "Only initiatorTypeNode role need to be supported." OBJECT fc2IscsiNodeRole SYNTAX BITS { targetTypeNode (0) } DESCRIPTION "Only targetTypeNode role need to be supported." OBJECT iscsi2FcNodeRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT fc2IscsiNodeRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT fcAddressRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT iscsiNodeNameRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT scsiLuExtRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." ::= { ciscoiScsiGwMIBCompliances 1 } ciscoiScsiGwMIBCompliance1 MODULE-COMPLIANCE STATUS deprecated -- superceeded by -- ciscoiScsiGwMIBCompliance2 DESCRIPTION "The compliance statement for entities which implement the CISCO-ISCSI-GW-MIB." MODULE MANDATORY-GROUPS { cigConfigurationGroupRev1, cigSessionStatsGroup, cigIscsiIfGroup } GROUP cigLuConfigurationGroupRev1 DESCRIPTION "Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets." OBJECT iscsi2FcNodeRole SYNTAX BITS { initiatorTypeNode (1) } DESCRIPTION "Only initiatorTypeNode role need to be supported." OBJECT fc2IscsiNodeRole SYNTAX BITS { targetTypeNode (0) } DESCRIPTION "Only targetTypeNode role need to be supported." OBJECT iscsi2FcNodeRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT fc2IscsiNodeRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT fcAddressRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT iscsiNodeNameRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT scsiLuExtRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT iscsi2FcNodeDiscovered MIN-ACCESS read-only DESCRIPTION "Only read-only need to be supported." ::= { ciscoiScsiGwMIBCompliances 2 } ciscoiScsiGwMIBCompliance2 MODULE-COMPLIANCE STATUS deprecated -- superceeed by ciscoiScsiGwMIBCompliance3 DESCRIPTION "The compliance statement for entities which implement the CISCO-ISCSI-GW-MIB." MODULE MANDATORY-GROUPS { cigConfigurationGroupRev2, cigSessionStatsGroup, cigIscsiIfGroupRev1, cigIscsiAuthGroup, cigIscsiGigEIfGroup } GROUP cigLuConfigurationGroupRev1 DESCRIPTION "Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets." OBJECT iscsi2FcNodeRole SYNTAX BITS { initiatorTypeNode (1) } DESCRIPTION "Only initiatorTypeNode role need to be supported." OBJECT fc2IscsiNodeRole SYNTAX BITS { targetTypeNode (0) } DESCRIPTION "Only targetTypeNode role need to be supported." OBJECT iscsi2FcNodeRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} MIN-ACCESS read-create DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT fc2IscsiNodeRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT fcAddressRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT iscsiNodeNameRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT scsiLuExtRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT iscsi2FcNodeDiscovered MIN-ACCESS read-only DESCRIPTION "Only read-only need to be supported." ::= { ciscoiScsiGwMIBCompliances 3 } ciscoiScsiGwMIBCompliance3 MODULE-COMPLIANCE STATUS deprecated -- superceeded by -- ciscoiScsiGwMIBCompliance4 DESCRIPTION "The compliance statement for entities which implement the CISCO-ISCSI-GW-MIB." MODULE MANDATORY-GROUPS { cigConfigurationGroupRev3, cigSessionStatsGroup, cigIscsiIfGroupRev3, cigIscsiAuthGroup, cigIscsiGigEIfGroup } GROUP cigLuConfigurationGroupRev1 DESCRIPTION "Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets." OBJECT iscsi2FcNodeRole SYNTAX BITS { initiatorTypeNode (1) } DESCRIPTION "Only initiatorTypeNode role need to be supported." OBJECT fc2IscsiNodeRole SYNTAX BITS { targetTypeNode (0) } DESCRIPTION "Only targetTypeNode role need to be supported." OBJECT iscsi2FcNodeRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT fc2IscsiNodeRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT fcAddressRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT iscsiNodeNameRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT scsiLuExtRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT iscsi2FcNodeDiscovered MIN-ACCESS read-only DESCRIPTION "Only read-only need to be supported." ::= { ciscoiScsiGwMIBCompliances 4 } ciscoiScsiGwMIBCompliance4 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the CISCO-ISCSI-GW-MIB." MODULE MANDATORY-GROUPS { cigConfigurationGroupRev3, cigSessionStatsGroup, cigIscsiIfGroupRev4, cigIscsiAuthGroup, cigIscsiGigEIfGroup } GROUP cigLuConfigurationGroupRev1 DESCRIPTION "Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets." OBJECT iscsi2FcNodeRole SYNTAX BITS { initiatorTypeNode (1) } DESCRIPTION "Only initiatorTypeNode role need to be supported." OBJECT fc2IscsiNodeRole SYNTAX BITS { targetTypeNode (0) } DESCRIPTION "Only targetTypeNode role need to be supported." OBJECT iscsi2FcNodeRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT fc2IscsiNodeRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT fcAddressRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT iscsiNodeNameRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT scsiLuExtRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6)} DESCRIPTION "Only 'createAndGo', 'destroy' and 'active' need to be supported." OBJECT iscsi2FcNodeDiscovered MIN-ACCESS read-only DESCRIPTION "Only read-only need to be supported." ::= { ciscoiScsiGwMIBCompliances 5 } -- Units of Conformance cigConfigurationGroup OBJECT-GROUP OBJECTS { iscsiImprtExprtTgtsConfImport, iscsiImprtExprtTgtsConfExport, iscsi2FcNodeName, iscsi2FcNodeRole, iscsi2FcNodePersistentFCAddr, iscsi2FcPortPersistentFCAddr, iscsi2FcPortNumFCAddr, iscsi2FcNodeFCAddr, iscsi2FcPortFCAddrListIndex, iscsi2FcNodeVsanList2k, iscsi2FcNodeVsanList4k, iscsi2FcNodeDiscovered, iscsi2FcNodeRowStatus, fc2IscsiNodeRole, fc2IscsiNodeName, fc2IscsiPortFCAddrListIndex, fc2IscsiNodePermitListIndex, fc2IscsiNodeAdvIntfListIndex, fc2IscsiNodeAllIntrAccessAllowed, fc2IscsiNodeDiscovered, fc2IscsiNodeRowStatus, fcAddress, fcSecondaryAddress, fcAddressRowStatus, iscsiNodeName, iscsiNodeNameRowStatus, nodeAdvIntfIfIndex, nodeAdvIntfIfRowStatus } STATUS deprecated -- superceeded by cigConfigurationGroupRev1 DESCRIPTION "A collection of objects for iSCSI Gateway configuration." ::= { ciscoiScsiGwMIBGroups 1 } cigLuConfigurationGroup OBJECT-GROUP OBJECTS { scsiLuExtRemotePortFcAddress, scsiLuExtRemotePortSecFcAddress, scsiLuExtLocalTargetAddress, scsiLuExtRemoteLun, scsiLuExtLocalLun, scsiLuExtRowStatus } STATUS deprecated -- superceeded by -- cigLuConfigurationGroupRev1 DESCRIPTION "A collection of objects for creation virtual iSCSI targets from remote LUs." ::= { ciscoiScsiGwMIBGroups 2 } cigSessionStatsGroup OBJECT-GROUP OBJECTS { iscsiSsnVsan } STATUS current DESCRIPTION "A collection of objects for iSCSI session statistics." ::= { ciscoiScsiGwMIBGroups 3 } cigConfigurationGroupRev1 OBJECT-GROUP OBJECTS { iscsiImprtExprtTgtsConfImport, iscsiImprtExprtTgtsConfExport, iscsi2FcNodeName, iscsi2FcNodeRole, iscsi2FcNodePersistentFCAddr, iscsi2FcPortPersistentFCAddr, iscsi2FcPortNumFCAddr, iscsi2FcNodeFCAddr, iscsi2FcPortFCAddrListIndex, iscsi2FcNodeVsanList2k, iscsi2FcNodeVsanList4k, iscsi2FcNodeDiscovered, iscsi2FcNodeRowStatus, iscsi2FcNodeFcAddrAssignment, fc2IscsiNodeRole, fc2IscsiNodeName, fc2IscsiPortFCAddrListIndex, fc2IscsiNodePermitListIndex, fc2IscsiNodeAdvIntfListIndex, fc2IscsiNodeAllIntrAccessAllowed, fc2IscsiNodeDiscovered, fc2IscsiNodeRowStatus, fcAddress, fcSecondaryAddress, fcAddressRowStatus, iscsiNodeName, iscsiNodeNameRowStatus, nodeAdvIntfIfIndex, nodeAdvIntfIfRowStatus } STATUS deprecated -- superceeded by cigConfigurationGroupRev2 DESCRIPTION "A collection of objects for iSCSI Gateway configuration." ::= { ciscoiScsiGwMIBGroups 4 } cigLuConfigurationGroupRev1 OBJECT-GROUP OBJECTS { scsiLuExtRemotePortFcAddress, scsiLuExtRemotePortSecFcAddress, scsiLuExtLocalTargetAddress, scsiLuExtRemoteLun, scsiLuExtLocalLun, scsiLuExtRowStatus, scsiLuExtRemoteSecLun } STATUS current DESCRIPTION "A collection of objects for creation virtual iSCSI targets from remote LUs." ::= { ciscoiScsiGwMIBGroups 5 } cigIscsiIfGroup OBJECT-GROUP OBJECTS { iscsiIfTcpKeepAliveTimeout, iscsiIfTcpMaxBandwidth, iscsiIfTcpMaxRetransmissions, iscsiIfTcpMinRetransmitTime, iscsiIfTcpPMTUEnable, iscsiIfTcpQOS, iscsiIfTcpSACKEnable, iscsiIfTcpSendBufferSize, iscsiIfTcpMinBandwidth, iscsiIfTcpPMTUResetTimeout, iscsiIfTcpLocalPort } STATUS deprecated -- superceeded by cigIscsiIfGroupRev1 DESCRIPTION "A collection of objects for iSCSI interface configuration and monitoring." ::= { ciscoiScsiGwMIBGroups 6 } cigIscsiIfGroupRev1 OBJECT-GROUP OBJECTS { iscsiIfTcpKeepAliveTimeout, iscsiIfTcpMaxBandwidth, iscsiIfTcpMaxRetransmissions, iscsiIfTcpMinRetransmitTime, iscsiIfTcpPMTUEnable, iscsiIfTcpQOS, iscsiIfTcpSACKEnable, iscsiIfTcpSendBufferSize, iscsiIfTcpMinBandwidth, iscsiIfTcpPMTUResetTimeout, iscsiIfTcpLocalPort, iscsiIfForwardingMode, iscsiIfIntrProxyMode, iscsiIfIntrProxyModeNodeFcAddr, iscsiIfIntrProxyModePortFcAddr, iscsiIfIntrProxyModeFcAddrAsgnmt } STATUS deprecated -- superceeded by cigIscsiIfGroupRev2 DESCRIPTION "A collection of objects for iSCSI interface configuration and monitoring." ::= { ciscoiScsiGwMIBGroups 7 } cigIscsiAuthGroup OBJECT-GROUP OBJECTS { iscsiAuthMethod, iscsi2FcNodeAuthUser, iscsiGigEIfAuthMethod } STATUS current DESCRIPTION "A collection of objects for iSCSI authentication." ::= { ciscoiScsiGwMIBGroups 8 } cigConfigurationGroupRev2 OBJECT-GROUP OBJECTS { iscsiImprtExprtTgtsConfImport, iscsiImprtExprtTgtsConfExport, iscsi2FcNodeName, iscsi2FcNodeRole, iscsi2FcNodePersistentFCAddr, iscsi2FcPortPersistentFCAddr, iscsi2FcPortNumFCAddr, iscsi2FcNodeFCAddr, iscsi2FcPortFCAddrListIndex, iscsi2FcNodeVsanList2k, iscsi2FcNodeVsanList4k, iscsi2FcNodeDiscovered, iscsi2FcNodeRowStatus, iscsi2FcNodeFcAddrAssignment, fc2IscsiNodeRole, fc2IscsiNodeName, fc2IscsiPortFCAddrListIndex, fc2IscsiNodePermitListIndex, fc2IscsiNodeAdvIntfListIndex, fc2IscsiNodeAllIntrAccessAllowed, fc2IscsiNodeDiscovered, fc2IscsiNodeRowStatus, fc2IscsiNodeTrespassMode, fc2IscsiNodeRevertToPrimaryPort, fcAddress, fcSecondaryAddress, fcAddressRowStatus, iscsiNodeName, iscsiNodeNameRowStatus, nodeAdvIntfIfIndex, nodeAdvIntfIfRowStatus } STATUS deprecated -- superceeded by cigConfigurationGroupRev3 DESCRIPTION "A collection of objects for iSCSI Gateway configuration." ::= { ciscoiScsiGwMIBGroups 9 } cigIscsiGigEIfGroup OBJECT-GROUP OBJECTS { iscsiGigEIfIsnsServerProfileName, iscsiGigEIfIscsiSessions } STATUS current DESCRIPTION "A collection of objects for iSCSI GigE interface configurations." ::= { ciscoiScsiGwMIBGroups 10 } cigIscsiIfGroupRev2 OBJECT-GROUP OBJECTS { iscsiIfTcpKeepAliveTimeout, iscsiIfTcpMaxBandwidth, iscsiIfTcpMaxRetransmissions, iscsiIfTcpMinRetransmitTime, iscsiIfTcpPMTUEnable, iscsiIfTcpQOS, iscsiIfTcpSACKEnable, iscsiIfTcpSendBufferSize, iscsiIfTcpMinBandwidth, iscsiIfTcpPMTUResetTimeout, iscsiIfTcpLocalPort, iscsiIfForwardingMode, iscsiIfIntrProxyMode, iscsiIfIntrProxyModeNodeFcAddr, iscsiIfIntrProxyModePortFcAddr, iscsiIfIntrProxyModeFcAddrAsgnmt } STATUS deprecated -- superceeded by cigIscsiIfGroupRev3 DESCRIPTION "A collection of objects for iSCSI interface configuration and monitoring." ::= { ciscoiScsiGwMIBGroups 11 } cigConfigurationGroupRev3 OBJECT-GROUP OBJECTS { iscsiImprtExprtTgtsConfImport, iscsiImprtExprtTgtsConfExport, iscsi2FcNodeName, iscsi2FcNodeRole, iscsi2FcNodePersistentFCAddr, iscsi2FcPortPersistentFCAddr, iscsi2FcPortNumFCAddr, iscsi2FcNodeFCAddr, iscsi2FcPortFCAddrListIndex, iscsi2FcNodeVsanList2k, iscsi2FcNodeVsanList4k, iscsi2FcNodeDiscovered, iscsi2FcNodeRowStatus, iscsi2FcNodeFcAddrAssignment, fc2IscsiNodeRole, fc2IscsiNodeName, fc2IscsiPortFCAddrListIndex, fc2IscsiNodePermitListIndex, fc2IscsiNodeAdvIntfListIndex, fc2IscsiNodeAllIntrAccessAllowed, fc2IscsiNodeDiscovered, fc2IscsiNodeRowStatus, fc2IscsiNodeTrespassMode, fc2IscsiNodeRevertToPrimaryPort, fcAddress, fcSecondaryAddress, fcAddressRowStatus, iscsiNodeName, iscsiNodeNameRowStatus, nodeAdvIntfIfIndex, nodeAdvIntfIfRowStatus, iscsiInitiatorIdleTimeout, iscsiIntrIdentificationMode } STATUS current DESCRIPTION "A collection of objects for iSCSI Gateway configuration." ::= { ciscoiScsiGwMIBGroups 12 } cigIscsiIfGroupRev3 OBJECT-GROUP OBJECTS { iscsiIfTcpKeepAliveTimeout, iscsiIfTcpMaxBandwidth, iscsiIfTcpMaxRetransmissions, iscsiIfTcpMinRetransmitTime, iscsiIfTcpPMTUEnable, iscsiIfTcpQOS, iscsiIfTcpSACKEnable, iscsiIfTcpSendBufferSize, iscsiIfTcpMinBandwidth, iscsiIfTcpPMTUResetTimeout, iscsiIfTcpLocalPort, iscsiIfForwardingMode, iscsiIfIntrProxyMode, iscsiIfIntrProxyModeNodeFcAddr, iscsiIfIntrProxyModePortFcAddr, iscsiIfIntrProxyModeFcAddrAsgnmt, iscsiIfIntrIdentificationMode } STATUS deprecated -- superceded by cigIscsiIfGroupRev4 DESCRIPTION "A collection of objects for iSCSI interface configuration and monitoring." ::= { ciscoiScsiGwMIBGroups 13 } cigIscsiIfGroupRev4 OBJECT-GROUP OBJECTS { iscsiIfTcpKeepAliveTimeout, iscsiIfTcpMaxBandwidth, iscsiIfTcpMaxRetransmissions, iscsiIfTcpMinRetransmitTime, iscsiIfTcpPMTUEnable, iscsiIfTcpQOS, iscsiIfTcpSACKEnable, iscsiIfTcpSendBufferSize, iscsiIfTcpMinBandwidth, iscsiIfTcpPMTUResetTimeout, iscsiIfForwardingMode, iscsiIfIntrProxyMode, iscsiIfIntrProxyModeNodeFcAddr, iscsiIfIntrProxyModePortFcAddr, iscsiIfIntrProxyModeFcAddrAsgnmt, iscsiIfIntrIdentificationMode, iscsiIfTcpLocalTcpPort, iscsiIfTcpRndTrpTimeEst } STATUS current DESCRIPTION "An collection of objects for iSCSI interface configuration and monitoring." ::= { ciscoiScsiGwMIBGroups 14 } END