CISCO-ITP-MLR-CAPABILITY device MIB details by Cisco

CISCO-ITP-MLR-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-ITP-MLR-CAPABILITY.

Vendor:	Cisco
Mib:	CISCO-ITP-MLR-CAPABILITY  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-ITP-MLR-CAPABILITY.my:  Multi-Layer SMS Routing 
--
-- April 2004, John Linton
--
-- Copyright (c) 2004, 2005 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-ITP-MLR-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
                
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
                
        ciscoAgentCapability
                FROM CISCO-SMI; 
                

ciscoMlrCapability MODULE-IDENTITY
                LAST-UPDATED    "200502180000Z"
                ORGANIZATION    "Cisco Systems, Inc."
                CONTACT-INFO
                        "       Cisco Systems
                                Customer Service
                        
                        Postal: 170 West Tasman Drive
                                San Jose, CA  95134
                                USA
                        
                           Tel: +1 800 553-NETS
                        
                        E-mail: cs-ss7@cisco.com"
                DESCRIPTION
                   "Agent capabilities for the CISCO-ITP-MLR-MIB."
                        
                        
                REVISION        "200502180000Z"
                DESCRIPTION
                   "Added ciscoMlrCapabilityV12R0225SW01 capability
                    statement. Replace the ciscoMlrRuleSetGroup
                    group with ciscoMlrRuleSetGroupRev2 to support
                    additional rule parameters."
                        
                REVISION        "200404300000Z"
                DESCRIPTION
                        "Initial version of this MIB module."
        ::= { ciscoAgentCapability 423 }


ciscoMlrCapabilityV12R0221SW01 AGENT-CAPABILITIES

    PRODUCT-RELEASE "Cisco IOS 12.2(21)SW1"
    STATUS           current
    DESCRIPTION     "IOS 12.2(21)SW1 Cisco CISCO-ITP-MLR-MIB.my 
                     User Agent MIB capabilities."

    SUPPORTS        CISCO-ITP-MLR-MIB
        INCLUDES    {   ciscoMlrTableGroup,
                        ciscoMlrTriggerGroup,
                        ciscoMlrAddressGroup,
                        ciscoMlrRuleSetGroup,
                        ciscoMlrResultGroup,
                        ciscoMlrNotificationsGroup
                    }  
    
    ::= { ciscoMlrCapability 1 }
    
ciscoMlrCapabilityV12R0225SW01 AGENT-CAPABILITIES

    PRODUCT-RELEASE "Cisco IOS 12.2(25)SW1"
    STATUS           current
    DESCRIPTION     "IOS 12.2(25)SW1 Cisco CISCO-ITP-MLR-MIB.my 
                     User Agent MIB capabilities."

    SUPPORTS        CISCO-ITP-MLR-MIB
        INCLUDES    {   ciscoMlrTableGroup,
                        ciscoMlrTriggerGroup,
                        ciscoMlrAddressGroup,
                        ciscoMlrRuleSetGroupRev2,
                        ciscoMlrResultGroup,
                        ciscoMlrNotificationsGroup
                    }  
    ::= { ciscoMlrCapability 2 }
END