CISCO-ITP-SP-CAPABILITY device MIB details by Cisco
CISCO-ITP-SP-CAPABILITY file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-ITP-SP-CAPABILITY.
Vendor: | Cisco |
---|---|
Mib: | CISCO-ITP-SP-CAPABILITY [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- CISCO-ITP-SP-CAPABILITY.my: Itp Signalling Point Agent -- capability MIB -- -- August 2001, John Linton -- -- Copyright (c) 2001-2002 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-ITP-SP-CAPABILITY DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI AGENT-CAPABILITIES FROM SNMPv2-CONF ciscoAgentCapability FROM CISCO-SMI; ciscoItpSpCapability MODULE-IDENTITY LAST-UPDATED "200201210000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-ss7@cisco.com" DESCRIPTION "Agent capabilities for the CISCO-ITP-SP-MIB." REVISION "200201210000Z" DESCRIPTION "Updated capabilities MIB as required for new group. cItpSpStatsGroup" REVISION "200110240000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoAgentCapability 217 } ciscoItpSpCapabilityV12R024MB1 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco IOS 12.2(4)MB1" STATUS current DESCRIPTION "IOS 12.2(4)MB1 Cisco CISCO-ITP-SP-MIB.my User Agent MIB capabilities." SUPPORTS CISCO-ITP-SP-MIB INCLUDES { cItpSpScalarsGroup, cItpSpPointCodeGroup, cItpSpLinksetGroup, cItpSpLinkGroup, cItpSpNotificationsEnableGroup, cItpSpNotificationsGroup } -- Entries not supported in cItpSpLinkTable ---- VARIATION cItpSpLinkQ752T1E3 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E4 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E5 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E6 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E8 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E10 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E11 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T2E7 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T2E9 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T2E10 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T2E15 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinksetActPriority ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinksetType ACCESS not-implemented DESCRIPTION "Not implemented." ::= { ciscoItpSpCapability 1 } ciscoItpSpCapabilityV12R0204MB3 AGENT-CAPABILITIES PRODUCT-RELEASE "Cisco IOS 12.2(4)MB3" STATUS current DESCRIPTION "IOS 12.2(4)MB3 Cisco CISCO-ITP-SP-MIB.my User Agent MIB capabilities." SUPPORTS CISCO-ITP-SP-MIB INCLUDES { cItpSpScalarsGroup, cItpSpPointCodeGroup, cItpSpLinksetGroup, cItpSpLinkGroup, cItpSpNotificationsEnableGroup, cItpSpNotificationsGroup, cItpSpStatsGroup } -- Entries not supported in cItpSpLinkTable ---- VARIATION cItpSpLinkQ752T1E3 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E4 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E5 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E6 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E8 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E10 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T1E11 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T2E7 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T2E9 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T2E10 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinkQ752T2E15 ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinksetActPriority ACCESS not-implemented DESCRIPTION "Not implemented." VARIATION cItpSpLinksetType ACCESS not-implemented DESCRIPTION "Not implemented." ::= { ciscoItpSpCapability 2 } END