CISCO-L2-TUNNEL-CONFIG-CAPABILITY device MIB details by Cisco

CISCO-L2-TUNNEL-CONFIG-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-L2-TUNNEL-CONFIG-CAPABILITY.

Vendor:	Cisco
Mib:	CISCO-L2-TUNNEL-CONFIG-CAPABILITY  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-L2-TUNNEL-CONFIG-CAPABILITY.my:
-- Cisco CISCO-L2-TUNNEL-CONFIG-MIB AGENT-CAPABILITIES
--
-- August 2003, Binh Le
--
-- Copyright (c) 2003, 2004 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-L2-TUNNEL-CONFIG-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoL2TunnelConfigCapability MODULE-IDENTITY
        LAST-UPDATED    "200406210000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 West Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-lan-switch-snmp@cisco.com,
                        cs-snmp@cisco.com"
        DESCRIPTION
                "The capabilities description of 
                 CISCO-L2-TUNNEL-CONFIG-MIB."

        REVISION        "200406210000Z"
        DESCRIPTION
                "Added capability statement
                 cL2TunConfCapCatOSV08R0401Cat6k."
        REVISION        "200308280000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoAgentCapability 334 }

cL2TunConfCapCatOSV07R0501Cat6k AGENT-CAPABILITIES
    PRODUCT-RELEASE      "Cisco CatOS 7.5(1) on Catalyst 6000/6500
                         and Cisco 7600 series devices."
    STATUS               current
    DESCRIPTION          "CISCO-L2-TUNNEL-CONFIG-MIB capabilities."

    SUPPORTS             CISCO-L2-TUNNEL-CONFIG-MIB
        INCLUDES         { cltcDot1qTunnelGroup, 
                           cltcTunneledProtocolGroup,
                           cltcTunnelThresholdGroup,
                           cltcTunnelStatisticsGroup, 
                           cltcDot1qAllTaggedGroup }

    ::= { ciscoL2TunnelConfigCapability 1 }

cL2TunnelConfigCapV12R0214SX AGENT-CAPABILITIES
    PRODUCT-RELEASE      "Cisco IOS 12.2(14)SX on Catalyst 6000/6500
                          and Cisco 7600 series devices."
    STATUS               current
    DESCRIPTION          "CISCO-L2-TUNNEL-CONFIG-MIB capabilities."

    SUPPORTS             CISCO-L2-TUNNEL-CONFIG-MIB
        INCLUDES         { cltcDot1qTunnelGroup, 
                           cltcTunneledProtocolGroup,
                           cltcTunnelThresholdGroup,
                           cltcTunnelStatisticsGroup, 
                           cltcDot1qAllTaggedGroup }

        VARIATION        cltcDot1qAllTaggedIfEnabled       
            DESCRIPTION  "Has same value as cltcDot1qAllTaggedEnabled.
                          Setting value on an interface will affect all
                          other ones and cltcDot1qAllTaggedEnabled."

    ::= { ciscoL2TunnelConfigCapability 2 }

cL2TunConfCapCatOSV08R0401 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "Cisco CatOS 8.4(1)."
    STATUS               current
    DESCRIPTION          "CISCO-L2-TUNNEL-CONFIG-MIB capabilities."

    SUPPORTS             CISCO-L2-TUNNEL-CONFIG-MIB
        INCLUDES         { cltcDot1qTunnelGroup, 
                           cltcTunneledProtocolGroup,
                           cltcTunnelThresholdGroup,
                           cltcTunnelStatisticsGroup, 
                           cltcDot1qAllTaggedGroup,
                           cltcTunnelDropStatisticsGroup,
                           cltcNotifsEnableGroup,
                           cltcTunnelThresholdNotifsGroup }

    ::= { ciscoL2TunnelConfigCapability 3 }
END