| lesElanName |
.1.3.6.1.4.1.9.9.39.1.1.1.1.1 |
|
The name associated with the emulated LAN which this
LES services.
|
| lesIndex |
.1.3.6.1.4.1.9.9.39.1.1.1.1.2 |
|
A unique identifier for this LES servicing this
ELAN. This value must remain constant while the entry
is in existence and during the operation of the agent
(i.e. It is allowed to change after reboot). For
implementations that do not allow more than one LES
entity per ELAN per device, it is sufficient to always
report 1 for this object and to only accept one for
row creation.
|
| lesAtmAddrSpec |
.1.3.6.1.4.1.9.9.39.1.1.1.1.3 |
|
The ATM address of the designated LES. Note that
setting this object will have the side effect of
reinitializing the LES and consequently dropping all
clients connected to it. If this object is not
specified at row creation time then the LES will
choose a value for itself and attempt to register with
the switch with that value. If an address is
specified which is not acceptable to the switch then
the lesOperStatus will remain inactive until an
acceptable address is set.
|
| lesAtmAddrMask |
.1.3.6.1.4.1.9.9.39.1.1.1.1.4 |
|
An address mask that when used with the
lesAtmAddrSpec specifies the portion of the LES' ATM
address that is desired to be configured. Note that
setting this object will result in the
reinitialization of the LES,consequently dropping all
clients connected to it. Note that this object cannot
be set at row creation time without also supplying a
value for the lesAtmAddrSpec object. If the LES ATM
address is omitted at creation time then this object
defaults to the value of all zeros (none of the
lesAtmAddrSpec value is relevant). If the LES ATM
address is specified at creation time but this object
omitted, then this object defaults to the value of all
ones (all of the lesAtmAddrSpec is relevant).
|
| lesAtmAddrActual |
.1.3.6.1.4.1.9.9.39.1.1.1.1.5 |
|
The resultant ATM address in use by the LES. This
object is a product of the specified ATM address, mask
and interaction with the switch via the ILMI.
|
| lesIfIndex |
.1.3.6.1.4.1.9.9.39.1.1.1.1.6 |
|
The interface that a LES will receive control
connections on. The value specified for this object
must equate to a value of ifIndex in the ifTable. The
interface will be for that particular ATM port (the
physical interface, not a logical layer on top of
it). This object can only be specified upon row
creation and cannot be altered there after.
|
| lesSubIfNum |
.1.3.6.1.4.1.9.9.39.1.1.1.1.7 |
|
Specifies the sub-interface number that the LES
will reside on. This sub-interface may be shared with
a LEC or BUS of the same ELAN but is not required to
do so. If no value is specified for this object at
row creation time, then a sub-interface will be chosen
by the agent. This object may only be specified at
row creation time and cannot be altered thereafter.
|
| lesColocBusAtmAddrSpec |
.1.3.6.1.4.1.9.9.39.1.1.1.1.8 |
|
For those implementations who do not allow the
separate creation/deletion of the LES and BUS this
object allows the operator to specify the ATM address
of the BUS at LES creation time. For implementations
that allow separate process creation this object is
optional. Otherwise this is the ATM address of the
designated BUS. Note that setting this object will
have the side effect of reinitializing the BUS and
consequently dropping all clients connected to it. If
this object is not specified at row creation time then
the BUS will choose a value for itself and attempt to
register with the switch with that value. If an
address is specified which is not acceptable to the
switch then the busOperStatus will remain inactive
until an acceptable address is set.
|
| lesColocBusAtmAddrMask |
.1.3.6.1.4.1.9.9.39.1.1.1.1.9 |
|
An address mask that when used with the
lesColocatedBusAtmAddr specifies the portion of the
BUS' ATM address desired by management. Note that
setting this object will have the side effect of
reinitializing the BUS and consequently dropping all
clients connected to it. Note that this object cannot
be set at row creation time without also supplying a
value for the lesColocBusAtmAddrSpec object. If the
BUS ATM address is omitted at creation time then this
object defaults to the value of all zeros (none of the
lesColocBusAtmAddrSpec value is relevant). If the BUS
ATM address is specified at creation time but this
object omitted, then this object defaults to the value
of all ones (all of the lesColocBusAtmAddrSpec is
relevant).
|
| lesColocBusAtmAddrActl |
.1.3.6.1.4.1.9.9.39.1.1.1.1.10 |
|
The ATM address in use by the BUS. This object is a
product of the specified ATM address, its mask and
interaction with the switch through the ILMI.
|
| lesUpTime |
.1.3.6.1.4.1.9.9.39.1.1.1.1.11 |
|
The value of sysUpTime when this LES became
activated.
|
| lesLanType |
.1.3.6.1.4.1.9.9.39.1.1.1.1.12 |
|
The type of legacy LAN that this LES emulates.
|
| lesMaxFrm |
.1.3.6.1.4.1.9.9.39.1.1.1.1.13 |
|
The maximum frame size that the specified LAN type
can accept.
|
| lesJoinTimeout |
.1.3.6.1.4.1.9.9.39.1.1.1.1.14 |
|
The number of seconds that must elapse before a
Join request can be timed-out.
|
| lesLecsAtmAddr |
.1.3.6.1.4.1.9.9.39.1.1.1.1.15 |
|
The ATM address associated with the LECS used by
this LES. If no LECS is in use by the LES then this
object will have the value of all 0's (i.e 0x0000...).
If it is desired that the LES get the address of the
LECS through the ILMI then this object may be left
unspecified at row activation. If the ILMI fails then
the lesOperStatus will be inactive(2) and this column
still not present.
|
| lesControlDistVpi |
.1.3.6.1.4.1.9.9.39.1.1.1.1.16 |
|
The virtual path identifier of the control
distribute VCC to all clients, if it exits.
|
| lesControlDistVci |
.1.3.6.1.4.1.9.9.39.1.1.1.1.17 |
|
The virtual channel identifier of the control
distribute VCC to all clients, if it exists.
|
| lesOperStatus |
.1.3.6.1.4.1.9.9.39.1.1.1.1.18 |
|
This object reflects the actual state of the LES
which may differ from that of the lesAdminStatus
object. This can occur when the interface
ifOperStatus is 'down' but the corresponding
lesAdminStatus is 'active'.
|
| lesAdminStatus |
.1.3.6.1.4.1.9.9.39.1.1.1.1.19 |
|
The desired state of the designated LES as
prescribed by the operator. The actions of the agent
will, if at all possible, eventually result in the
desired state being reflected in the lesOperStatus.
|
| lesStatus |
.1.3.6.1.4.1.9.9.39.1.1.1.1.20 |
|
The status of this entry (conceptual row). This row
cannot be set to active until an appropiate value of
lesIfIndex has been specified.
|
| lesSegmentID |
.1.3.6.1.4.1.9.9.39.1.1.1.1.21 |
|
The segment ID of the emulated LAN this LES is
servicing. This object is only valid if the
lesLanType is dot5(2).
|
| lesInErrors |
.1.3.6.1.4.1.9.9.39.1.1.2.1.1 |
|
The number of frames received by the LES which were
either malformed or did not follow standard protocol
(i.e. receiving a LE-ARP request for a multicast
address).
|
| lesInErrorLastLec |
.1.3.6.1.4.1.9.9.39.1.1.2.1.2 |
|
The ATM address of the LE client whose last frame to
the LES resulted in an increment to the lesInErrors
counter.
|
| lesInFlushReplies |
.1.3.6.1.4.1.9.9.39.1.1.2.1.3 |
|
The number of Flush replies that have been received
by the LES and forwarded onto its clients.
|
| lesInJoinReqs |
.1.3.6.1.4.1.9.9.39.1.1.2.1.4 |
|
The number of LE_JOIN_REQUESTs received by this LES
since activation.
|
| lesOutJoinFails |
.1.3.6.1.4.1.9.9.39.1.1.2.1.5 |
|
The number of rejection LE_JOIN_RESPONSEs
transmitted by this LES since activation.
|
| lesJoinLastFailCause |
.1.3.6.1.4.1.9.9.39.1.1.2.1.6 |
|
The cause for the transmission of the last rejection
LE_JOIN_RESPONSE. This is the value of the status
field within the rejection response. If the server
has never issued a rejection response then this object
will have the value of 0.
|
| lesJoinLastFailLec |
.1.3.6.1.4.1.9.9.39.1.1.2.1.7 |
|
The ATM address of the client whose last
LE_JOIN_REQUEST resulted in a rejection by this
server. If the server has never issued a rejection
response then this object will have the value of all
0's (i.e. 0x000...).
|
| lesOutConfigReqs |
.1.3.6.1.4.1.9.9.39.1.1.2.1.8 |
|
The number of LE_CONFIGURE_REQUESTs sent by this LES
since activation.
|
| lesInConfigResps |
.1.3.6.1.4.1.9.9.39.1.1.2.1.9 |
|
The number of successful LE_CONFIGURE_RESPONSEs
received by this LES since activation.
|
| lesInConfigFails |
.1.3.6.1.4.1.9.9.39.1.1.2.1.10 |
|
The number of rejection LE_CONFIGURE_RESPONSEs
received by this LES since activation.
|
| lesInRegisReqs |
.1.3.6.1.4.1.9.9.39.1.1.2.1.11 |
|
The number of LE_REGISTER_REQUESTs received by this
LES since activation.
|
| lesOutRegisFails |
.1.3.6.1.4.1.9.9.39.1.1.2.1.12 |
|
The number of rejection LE_REGISTER_RESPONSEs
transmitted by this LES since activation.
|
| lesRegisLastFailCause |
.1.3.6.1.4.1.9.9.39.1.1.2.1.13 |
|
The cause for the transmission of the last rejection
LE_REGISTER_RESPONSE. This variable has the value of
the status field within the last failure register
response. If the server has never issued a failed
registration response then the value of this object
shall be 0.
|
| lesRegisLastFailLec |
.1.3.6.1.4.1.9.9.39.1.1.2.1.14 |
|
The ATM address of the client whose last
LE_REGISTER_REQUEST to this LES resulted in failure.
If the server has never issued a failed registration
response then the value of this object shall be all
0's (i.e. x0000...).
|
| lesInUnregReqs |
.1.3.6.1.4.1.9.9.39.1.1.2.1.15 |
|
The number of valid LE_UNREGISTER_REQUESTs received
by this LES since activation.
|
| lesInLearpUcasts |
.1.3.6.1.4.1.9.9.39.1.1.2.1.16 |
|
The number of LE_ARP_REQUESTs received by this
LES since activation and responded to directly.
This applies to all LE_ARP requests for addresses
registered by LE clients with the LES. Note that a
LES is not required to answer LE_ARP requests directly
and may forward the request on to the control
distribute regardless. This counter does not apply to
those requests the BUS (the broadcast address).
|
| lesInLearpBroadcasts |
.1.3.6.1.4.1.9.9.39.1.1.2.1.17 |
|
The number of LE_ARP_REQUEST received by the LES for
the broadcast address. These requests are responded
to with the BUS' ATM address.
|
| lesOutLearpFwd |
.1.3.6.1.4.1.9.9.39.1.1.2.1.18 |
|
The number of LE_ARP_REQUEST frames forwarded onto
the control distribute VC.
|
| lesInLearpResps |
.1.3.6.1.4.1.9.9.39.1.1.2.1.19 |
|
The number of LE_ARP_RESPONSEs received by this LES
and forwarded onto the control distribute.
|
| lesInNarpReqs |
.1.3.6.1.4.1.9.9.39.1.1.2.1.20 |
|
The number of Negative LE_ARP requests received by
this LES and forwarded on to the control distribute
VC.
|
| lesInTopolReqs |
.1.3.6.1.4.1.9.9.39.1.1.2.1.21 |
|
The number of LE_TOPOLOGY_REQUESTs received by this
LES since activation.
|
| lesClientLecid |
.1.3.6.1.4.1.9.9.39.1.2.1.1.1 |
|
The LECID selected for an LEC by the LES during the JOIN
phase.
|
| lesClientAtmAddr |
.1.3.6.1.4.1.9.9.39.1.2.1.1.2 |
|
The primary ATM address associated with the designated LEC.
|
| lesClientState |
.1.3.6.1.4.1.9.9.39.1.2.1.1.3 |
|
The current state of the LEC. Note that busConnect is only a
monitorable state if the BUS is colocated with the LES. In the
event that it is not then the client state should proceed
immediately to operational within this table (though it may not
do so in actuality). Note that there is no relation between the
client's internal state and the state reflected here. The
state here is only the LES's observed state of the LEC.
|
| lesClientIfIndex |
.1.3.6.1.4.1.9.9.39.1.2.1.1.4 |
|
The interface of the bi-directional control direct connection
between the LEC and LES.
|
| lesClientControlVpi |
.1.3.6.1.4.1.9.9.39.1.2.1.1.5 |
|
The VPI of the bi-directional control direct connection
between the LEC and LES.
|
| lesClientControlVci |
.1.3.6.1.4.1.9.9.39.1.2.1.1.6 |
|
The VCI of the bi-directional control direct connection
between the LEC and LES.
|
| lesClientStatus |
.1.3.6.1.4.1.9.9.39.1.2.1.1.7 |
|
The status of the (conceptual) row. Note that this
object may only return the active(1) state. The only
value which may be written to this object is the
destroy(6) state which will cause the client to be
dropped from the ELAN.
|
| lesMacRegMacAddress |
.1.3.6.1.4.1.9.9.39.1.3.1.1.1 |
|
The MAC address of a registered client.
|
| lesMacRegAtmAddr |
.1.3.6.1.4.1.9.9.39.1.3.1.1.3 |
|
The ATM address of the LEC that corresponds to the
registered MAC address.
|
| lesMacRegLecid |
.1.3.6.1.4.1.9.9.39.1.3.1.1.4 |
|
The LECID of the client who registered the
designated MAC address.
|
| lesRDRegSegmentId |
.1.3.6.1.4.1.9.9.39.1.3.2.1.1 |
|
The segment ID of a registered client.
|
| lesRDRegBridgeNum |
.1.3.6.1.4.1.9.9.39.1.3.2.1.2 |
|
The bridge number of a registered client going to
the designated segment.
|
| lesRDRegAtmAddr |
.1.3.6.1.4.1.9.9.39.1.3.2.1.3 |
|
The ATM address of the LEC that corresponds to the
registered Route Descriptor.
|
| lesRDRegLecid |
.1.3.6.1.4.1.9.9.39.1.3.2.1.4 |
|
The LECID of the client who registered the
designated Route Descriptor address.
|
