CISCO-MAU-EXT-MIB.mib object view, vendor Cisco
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CISCO-MAU-EXT-MIB and use it to monitor vendor specific OID's.
CISCO-MAU-EXT-MIB file content
Object view of CISCO-MAU-EXT-MIB:
| Scalar Object |
| cmExtJackConfigEntry |
.1.3.6.1.4.1.9.9.398.1.1.1.1 |
|
An entry containing additional management information
for a particular jack.
|
| cmExtIfAutoMdixConfigEntry |
.1.3.6.1.4.1.9.9.398.1.2.1.1 |
|
An entry containing Auto-MDIX configuration
information for a MAU connected to the interface.
|
| Tabular Object |
| cmExtJackState |
.1.3.6.1.4.1.9.9.398.1.1.1.1.1 |
|
Indicates the state of a particular jack.
Within a particular MAU, setting this to 'active' on
a jack which is not the current active jack will
deactivate the current active jack.
Setting the current active jack to 'active' has no
effect.
A value of inactive(2) indicates that the jack is
currently deactiveated. Setting this to 'inactive'
has no effect. Of all the jacks connected to a MAU,
at least one must be active at all times.
|
| cmExtIfAutoMdixEnabled |
.1.3.6.1.4.1.9.9.398.1.2.1.1.1 |
|
Specifies if Auto-MDIX feature is enabled on
the MAU.
|
| Table |
| cmExtJackConfigTable |
.1.3.6.1.4.1.9.9.398.1.1.1 |
|
This table contains management information about MAUs
attached to interfaces with managed jacks. The
objects in this table are in addition to the objects
in the ifJackTable.
|
| cmExtIfAutoMdixConfigTable |
.1.3.6.1.4.1.9.9.398.1.2.1 |
|
This table contains Auto-MDIX configuration
information for MAUs attached to interfaces in the
device. An entry appears in this table for each
active Auto-MDIX capable MAU connected to
interfaces in the device.
|
| Object Identifier |
| ciscoMauExtMIB |
.1.3.6.1.4.1.9.9.398 |
|
A MIB module for extending the MAU-MIB (RFC 3636)
to add objects which provide additional management
information about MAU or Jack not available in
MAU-MIB.
|
| cmExtMIBNotifs |
.1.3.6.1.4.1.9.9.398.0 |
| cmExtMIBObjects |
.1.3.6.1.4.1.9.9.398.1 |
| cmExtMIBConformance |
.1.3.6.1.4.1.9.9.398.2 |
| cmExtMauConfig |
.1.3.6.1.4.1.9.9.398.1.1 |
| cmExtAutoMdixConfig |
.1.3.6.1.4.1.9.9.398.1.2 |
| cmExtMIBCompliances |
.1.3.6.1.4.1.9.9.398.2.1 |
| cmExtMIBGroups |
.1.3.6.1.4.1.9.9.398.2.2 |
| Group |
| cmExtJackConfigGroup |
.1.3.6.1.4.1.9.9.398.2.2.1 |
|
A collection of objects providing the configuration
information about MAUs attached to interfaces with
managed jacks.
|
| cmExtIfAutoMdixConfigGroup |
.1.3.6.1.4.1.9.9.398.2.2.2 |
|
A collection of objects providing the configuration
information of Auto-MDIX feature in the device.
|
