CISCO-NS-MIB device MIB details by Cisco
CISCO-NS-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-NS-MIB.
Vendor: | Cisco |
---|---|
Mib: | CISCO-NS-MIB [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ********************************************************************* -- CISCO-NS-MIB.my: Name Server Mib -- -- September 2002, H K Vivek -- -- Copyright (c) 2002 by cisco Systems, Inc. -- All rights reserved. -- -- ********************************************************************* CISCO-NS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,OBJECT-TYPE, NOTIFICATION-TYPE, Counter32,Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB TruthValue, TEXTUAL-CONVENTION, TimeStamp FROM SNMPv2-TC ciscoMgmt FROM CISCO-SMI FcNameId, FcAddressId, FcClassOfServices, FcNameIdOrZero FROM CISCO-ST-TC vsanIndex, notifyVsanIndex FROM CISCO-VSAN-MIB; ciscoNsMIB MODULE-IDENTITY LAST-UPDATED "200408300000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-san@cisco.com" DESCRIPTION "The MIB module for the management of the Cisco Name Server which realizes the FC-GS3 requirements for Name Server (NS)." REVISION "200408300000Z" DESCRIPTION "Added fcNameServerPermanentPortName object to fcNameServerTable." REVISION "200402190000Z" DESCRIPTION "Added notifications fcNameServerEntryAdd, fcNameServerEntryDelete." REVISION "200303060000Z" DESCRIPTION "Added fcNameServerPortFunction object." REVISION "200210030000Z" DESCRIPTION "Initial version of this MIB." ::= { ciscoMgmt 293 } ciscoNameServerMIBObjects OBJECT IDENTIFIER ::= { ciscoNsMIB 1 } fcNameServerMIBConformance OBJECT IDENTIFIER ::= { ciscoNsMIB 2 } fcNameServerConfiguration OBJECT IDENTIFIER ::= { ciscoNameServerMIBObjects 1 } fcNameServerStats OBJECT IDENTIFIER ::= { ciscoNameServerMIBObjects 2 } fcNameServerInformation OBJECT IDENTIFIER ::= { ciscoNameServerMIBObjects 3 } fcNameServerNotification OBJECT IDENTIFIER ::= { ciscoNameServerMIBObjects 4 } fcNameServerNotifications OBJECT IDENTIFIER ::= { fcNameServerNotification 0 } -- Textual Conventions FcGs3RejectReasonCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The GS-3 reject reason code for a request. none(1) - no error. invalidCmdCode(2) - req contains an invalid command code. invalidVerLevel(3) - req contains an invalid version number. logicalError(4) - there is a logical error. invalidIUSize(5) - Information Unit (IU) size is invalid. logicalBusy(6) - the module is busy. protocolError(7) - there is a protocol error. unableToPerformCmdReq(8) - the command specified in the req could not be executed. The details of exactly what failed will be in the corresponding reason code explanation. cmdNotSupported(9) - the command is not supported. vendorError(10) - specific vendor error." SYNTAX INTEGER { none(1), invalidCmdCode(2), invalidVerLevel(3), logicalError(4), invalidIUSize(5), logicalBusy(6), protocolError(7), unableToPerformCmdReq(8), cmdNotSupported(9), vendorError(10) } FcNameServerRejReasonExpl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The reject reason code explanation. noAdditionalExplanation(1) - no additional explanation. portIdentifierNotRegistered(2) - port Id not registered. portNameNotRegistered(3) - port name not registered. nodeNameNotRegistered(4) - node name not registered. classOfServiceNotRegistered(5) - class of service not registered. nodeIpAddressNotRegistered(6) - node IP address not registered. ipaNotRegistered(7) - Initial Process Associator (IPA) not registered. fc4TypeNotRegistered(8) - FC4 type not registered. symbolicPortNameNotRegistered(9) - symbolic port name not registered. symbolicNodeNameNotRegistered(10) - symbolic node name not registered. portTypeNotRegistered(11) - type of port not registered. portIpAddressNotRegistered(12) - port IP address not registered. fabricPortNameNotRegistered(13) - fabric port name not registered. hardAddressNotRegistered(14) - hard address not registered fc4DescriptorNotRegistered(15) - FC4 descriptor not registered. fc4FeaturesNotRegistered(16) - FC4 features not registered. accessDenied(17) - access is denied. unacceptablePortIdentifier(18) - port Id is invalid. databaseEmpty(19) - database is empty. noObjectRegInSpecifiedScope(20) - no object has been registered in the specified scope." SYNTAX INTEGER { noAdditionalExplanation(1), portIdentifierNotRegistered(2), portNameNotRegistered(3), nodeNameNotRegistered(4), classOfServiceNotRegistered(5), nodeIpAddressNotRegistered(6), ipaNotRegistered(7), fc4TypeNotRegistered(8), symbolicPortNameNotRegistered(9), symbolicNodeNameNotRegistered(10), portTypeNotRegistered(11), portIpAddressNotRegistered(12), fabricPortNameNotRegistered(13), hardAddressNotRegistered(14), fc4DescriptorNotRegistered(15), fc4FeaturesNotRegistered(16), accessDenied(17), unacceptablePortIdentifier(18), databaseEmpty(19), noObjectRegInSpecifiedScope(20) } -- -- Proxy Port Table -- fcNameServerProxyPortTable OBJECT-TYPE SYNTAX SEQUENCE OF FcNameServerProxyPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of proxy ports on all configured VSANs on the local switch. Only one proxy port is allowed on a VSAN." ::= { fcNameServerConfiguration 1 } fcNameServerProxyPortEntry OBJECT-TYPE SYNTAX FcNameServerProxyPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in this table." INDEX { vsanIndex } ::= { fcNameServerProxyPortTable 1 } FcNameServerProxyPortEntry ::= SEQUENCE { fcNameServerProxyPortName FcNameIdOrZero } fcNameServerProxyPortName OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the proxy port which can register/deregister for other ports on this VSAN. Users can enable third party registrations by setting this object. In order to disable third party registrations, this object should be set to ''H." DEFVAL {''H} ::= { fcNameServerProxyPortEntry 1 } fcNameServerTableLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the last update to the fcNameServerTable. This includes creation of an entry, deletion of an entry and modification of an existing entry. If no updates have taken place since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { fcNameServerConfiguration 2 } fcNameServerNumRows OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Nx_Ports currently registered with this device fabric wide." ::= { fcNameServerConfiguration 3 } -- -- fcNameServerTable -- fcNameServerTable OBJECT-TYPE SYNTAX SEQUENCE OF FcNameServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for all Nx_Ports registered with Fx_Ports on all the VSANs configured on the local switch." ::= { fcNameServerConfiguration 4 } fcNameServerEntry OBJECT-TYPE SYNTAX FcNameServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the fcNameServerTable. This contains information about an Nx_Port represented by fcNameServerPortIdentifier for a particular VSAN identified by vsanIndex." INDEX { vsanIndex, fcNameServerPortIdentifier } ::= { fcNameServerTable 1 } FcNameServerEntry ::= SEQUENCE { fcNameServerPortIdentifier FcAddressId, fcNameServerPortName FcNameId, fcNameServerNodeName FcNameId, fcNameServerClassOfSvc FcClassOfServices, fcNameServerNodeIpAddress OCTET STRING, fcNameServerProcAssoc OCTET STRING, fcNameServerFC4Type OCTET STRING, fcNameServerPortType INTEGER, fcNameServerPortIpAddress OCTET STRING, fcNameServerFabricPortName FcNameId, fcNameServerHardAddress FcAddressId, fcNameServerSymbolicPortName SnmpAdminString, fcNameServerSymbolicNodeName SnmpAdminString, fcNameServerFC4Features OCTET STRING, fcNameServerPortFunction BITS, fcNameServerPermanentPortName FcNameId } fcNameServerPortIdentifier OBJECT-TYPE SYNTAX FcAddressId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Fibre Channel Identifier (FC-ID) of this Nx_Port." ::= { fcNameServerEntry 1 } fcNameServerPortName OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The fibre channel Port_Name (WWN) of this Nx_port. If this object is not set, then it will contain the null value '0000000000000000'h." DEFVAL {'0000000000000000'h} ::= { fcNameServerEntry 2 } fcNameServerNodeName OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The fibre channel Node_Name (WWN) of this Nx_port. If this object is not set, then it will contain the null value '0000000000000000'h." DEFVAL {'0000000000000000'h} ::= { fcNameServerEntry 3 } fcNameServerClassOfSvc OBJECT-TYPE SYNTAX FcClassOfServices MAX-ACCESS read-only STATUS current DESCRIPTION "The class of service indicator. This object is a array of bits that contain a bit map of the classes of service supported by the associated port. If a bit in this object is 1, it indicates that the class of service is supported by the associated port. When a bit is set to 0, it indicates that no class of service is supported by this Nx_port." ::= { fcNameServerEntry 4 } fcNameServerNodeIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the node of this Nx_port, as indicated by the Nx_Port in a GS3 message that it transmitted. The GS3 format specifies a 32-bit IPv4 address or a 128-bit IPv6 address. For the former, the leftmost 96 bits (12 bytes) are set to x'00 00 00 00 00 00 00 00 00 00 FF FF' and the rightmost 32 bits are supposed to contain the IPv4 address." REFERENCE "ANSI NCITS xxx-200x, Fibre Channel - Generic Services-3 (FC-GS-3), T11/Project 1356D/Rev 7.01 Section 5.1.4.40 and Section 5.1.2.5" ::= { fcNameServerEntry 5 } fcNameServerProcAssoc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Fibre Channel initial process associator (IPA)." ::= { fcNameServerEntry 6 } fcNameServerFC4Type OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The FC-4 protocol types supported by this Nx_port. This is an array of 256-bits. Each bit in the array corresponds to a Type value as defined by the fibre channel standards and contained in the Type field of the frame header." REFERENCE "ANSI NCITS xxx-200x, Fibre Channel - Generic Services-3 (FC-GS-3), T11/Project 1356D/Rev 7.01 Section 5.1.2.7." ::= { fcNameServerEntry 7 } fcNameServerPortType OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- port type unknown nPort(2), -- port is N_Port nlPort(3) -- port is NL_Port } MAX-ACCESS read-only STATUS current DESCRIPTION "The port type of this port." ::= { fcNameServerEntry 8 } fcNameServerPortIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the IP address of the associated port in either 32-bit IPv4 format or 128-bit IPv6 format. When this object contains a IPv4 address, the leftmost 96 bits (12 bytes) should contain x'00 00 00 00 00 00 00 00 00 00 FF FF'. The IPv4 address should be present in the rightmost 32 bits. Note that the value of this object is the IP address value that is received in the GS3 message Register IP address (Port) RIPP_ID. It is not validated against any IP address format." REFERENCE "ANSI NCITS xxx-200x, Fibre Channel - Generic Services-3, (FC-GS-3), T11/Project 1356D/Rev 7.01 Section 5.1.4.36 and Section 5.1.2.5" ::= { fcNameServerEntry 9 } fcNameServerFabricPortName OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The Fabric Port Name (WWN) of the Fx_port to which this Nx_port is attached. If this object is not set, then it will contain the null value '0000000000000000'h." DEFVAL {'0000000000000000'h} ::= { fcNameServerEntry 10 } fcNameServerHardAddress OBJECT-TYPE SYNTAX FcAddressId MAX-ACCESS read-only STATUS current DESCRIPTION "The format of this object is identical to the format of Hard Address defined in the Discover Address (ADISC) Extended Link Service (FC-PH-2). Hard Address is the 24-bit NL_Port identifier which consists of - the 8-bit Domain Id in the most significant byte - the 8-bit Area Id in the next most significant byte - the 8-bit AL-PA(Arbitrated Loop Physical Address) which an NL_port attempts acquire during FC-AL initialization in the least significant byte. If the port is not an NL_Port, or if it is an NL_Port but does not have a hard address, then all bits are reported as 0s." ::= { fcNameServerEntry 11 } fcNameServerSymbolicPortName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user-defined name of this port. If this object has not been set, then the value of this object is the zero length string." DEFVAL {''H} ::= { fcNameServerEntry 12 } fcNameServerSymbolicNodeName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user-defined name of the node of this port. If this object has not been set, then the value of this object is the zero length string." DEFVAL {''H} ::= { fcNameServerEntry 13 } fcNameServerFC4Features OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The FC-4 Features associated with this port and the FC-4 Type. Refer to FC-GS3 specification for the format of this object. This object is an array of 4-bit values, one for each TYPE code value. The 5 most significant bits of the TYPE field will be used to identify the word for the FC-4 Features object. - Word 0 contains information related to TYPE code '00' thru' '07'; - Word 1 contains information related to TYPE code '08' thru' 0F'; - and so forth to Word 31 that contains information related to TYPE code 'F8' thru' 'FF'. The 3 least significant bits of the TYPE field will be used to identify the position within the word for the 4-bit FC-4 Features value." REFERENCE "ANSI NCITS xxx-200x, Fibre Channel - Generic Services-3 (FC-GS-3), T11/Project 1356D/Rev 7.01 Section 5.1.2.14" ::= { fcNameServerEntry 14 } fcNameServerPortFunction OBJECT-TYPE SYNTAX BITS { trapPort(0), vep(1), volOwner(2), ipfcPort(3), intPort(4) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The function of this port. trapPort(0) indicates that this port is functioning as a Trap Port. vep(1) indicates that this port is functioning as a Virtual Enclosure Port (VEP). volOwner(2) indicates that this port is functioning as a Volume Owner. ipfcPort(3) indicates that this port is functioning as a IP-FC port. intPort(4) indicates that this port is functioning as an internal port." REFERENCE "CISCO-VEDM-MIB" ::= { fcNameServerEntry 15 } fcNameServerPermanentPortName OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The Permanent Port Name of this Nx_port. If multiple Port_Name(s) are associated with this Nx_port via FDISC (Discover F_Port Service Parameters), the Permanent Port Name is the original Port_Name associated with this Nx_port at login. If this object is not set, then it will contain the null value '0000000000000000'h." REFERENCE "Fibre-Channel - Generic Services - 4 T11/ Project 1505-D/Rev 7.91 Section 5.2.3.16" ::= { fcNameServerEntry 16 } -- Name Server Statistics fcNameServerTotalRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of requests rejected by the local switch across all VSANs." ::= { fcNameServerStats 1 } fcNameServerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FcNameServerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistic counters which are maintained by the Name Server. These counters are maintained per VSAN." ::= { fcNameServerStats 2 } fcNameServerStatsEntry OBJECT-TYPE SYNTAX FcNameServerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in this table." INDEX { vsanIndex } ::= { fcNameServerStatsTable 1 } FcNameServerStatsEntry ::= SEQUENCE { -- Counters for Name Server's GS3 interactions fcNameServerInGetReqs Counter32, fcNameServerOutGetReqs Counter32, fcNameServerInRegReqs Counter32, fcNameServerInDeRegReqs Counter32, fcNameServerInRscns Counter32, fcNameServerOutRscns Counter32, -- Rejected Requests fcNameServerRejects Counter32 } fcNameServerInGetReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Get Requests received by the local switch on this VSAN." ::= { fcNameServerStatsEntry 1 } fcNameServerOutGetReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Get Requests sent by the local switch on this VSAN." ::= { fcNameServerStatsEntry 2 } fcNameServerInRegReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Registration Requests received by the local switch on this VSAN." ::= { fcNameServerStatsEntry 3 } fcNameServerInDeRegReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of De-registration Requests received by the local switch on this VSAN." ::= { fcNameServerStatsEntry 4 } fcNameServerInRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RSCN commands received by the local switch on this VSAN." ::= { fcNameServerStatsEntry 5 } fcNameServerOutRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RSCN commands sent by the local switch on this VSAN." ::= { fcNameServerStatsEntry 6 } fcNameServerRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of requests rejected by the local switch on this VSAN." ::= { fcNameServerStatsEntry 7 } -- Notification information objects fcNameServerRejectReasonCode OBJECT-TYPE SYNTAX FcGs3RejectReasonCode MAX-ACCESS read-only STATUS current DESCRIPTION "The registration reject reason code. This object contains the reason code corresponding to the most recent Name Server Registration request failure." ::= { fcNameServerInformation 1 } fcNameServerRejReasonCodeExp OBJECT-TYPE SYNTAX FcNameServerRejReasonExpl MAX-ACCESS read-only STATUS current DESCRIPTION "The registration reject reason code explanation. This object contains the reason code explanation if the above object has a reason code corresponding to 'Unable to perform command request'. This object like the one above, corresponds to the most recent Name Server Registration request rejection." ::= { fcNameServerInformation 2 } -- Notification control objects fcNameServerRejReqNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if the Name Server should generate 'fcNameServerRejectRegNotify' notifications. If value of this object is 'true', then the notification is generated when a request is rejected. If it is 'false', the notification is not generated." DEFVAL { false } ::= { fcNameServerConfiguration 5 } -- Notifications fcNameServerRejectRegNotify NOTIFICATION-TYPE OBJECTS {fcNameServerPortName, fcNameServerRejectReasonCode, fcNameServerRejReasonCodeExp} STATUS current DESCRIPTION "This notification is generated by the Name Server whenever it rejects a registration request. The Name Server should update the 'fcNameServerRejectReasonCode' and 'fcNameServerRejReasonCodeExp' objects with the corresponding reason code and reason code explanation before sending the notification. These two objects are also included along with the notification to provide the reason for the reject." ::= { fcNameServerNotifications 1 } fcNameServerDatabaseFull NOTIFICATION-TYPE OBJECTS {notifyVsanIndex} STATUS current DESCRIPTION "This notification is generated by the Name Server when the Name Server cannot allocate space for a new entry." ::= { fcNameServerNotifications 2 } fcNameServerEntryAdd NOTIFICATION-TYPE OBJECTS { fcNameServerPortName, fcNameServerPortType } STATUS current DESCRIPTION "This notification is generated by the Name Server when a new entry gets added to the Name Server database." ::= { fcNameServerNotifications 3 } fcNameServerEntryDelete NOTIFICATION-TYPE OBJECTS { fcNameServerPortName, fcNameServerPortType } STATUS current DESCRIPTION "This notification is generated by the Name Server when an existing entry is deleted from the Name Server database." ::= { fcNameServerNotifications 4 } -- Conformance fcNameServerMIBCompliances OBJECT IDENTIFIER ::= {fcNameServerMIBConformance 1} fcNameServerMIBGroups OBJECT IDENTIFIER ::= {fcNameServerMIBConformance 2} fcNameServerMIBCompliance MODULE-COMPLIANCE STATUS deprecated -- superceded by fcNameServerMIBComplianceRev1 DESCRIPTION "The compliance statement for entities which implement the name server." MODULE MANDATORY-GROUPS {fcNameServerDBGroup, fcNameServerStatsGroup, fcNameServerNotifyControlGroup, fcNameServerNotifyGroup} ::= { fcNameServerMIBCompliances 1 } fcNameServerMIBCompliance1 MODULE-COMPLIANCE STATUS deprecated -- superceded by fcNameServerMIBCompliance2 DESCRIPTION "The compliance statement for entities which implement the name server." MODULE MANDATORY-GROUPS {fcNameServerDBGroup1, fcNameServerStatsGroup, fcNameServerNotifyControlGroup, fcNameServerNotifyGroup} ::= { fcNameServerMIBCompliances 2 } fcNameServerMIBCompliance2 MODULE-COMPLIANCE STATUS deprecated -- superceded by fcNameServerMIBCompliance3 DESCRIPTION "The compliance statement for entities which implement the name server." MODULE MANDATORY-GROUPS {fcNameServerDBGroup2, fcNameServerStatsGroup, fcNameServerNotifyControlGroup, fcNameServerNotifyGroupRev1} ::= { fcNameServerMIBCompliances 3 } fcNameServerMIBCompliance3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the name server." MODULE MANDATORY-GROUPS {fcNameServerDBGroup3, fcNameServerStatsGroup, fcNameServerNotifyControlGroup, fcNameServerNotifyGroupRev1} ::= { fcNameServerMIBCompliances 4 } -- Units of conformance fcNameServerDBGroup OBJECT-GROUP OBJECTS {fcNameServerProxyPortName, fcNameServerNumRows, fcNameServerTableLastChange, fcNameServerPortName, fcNameServerNodeName, fcNameServerClassOfSvc, fcNameServerNodeIpAddress, fcNameServerProcAssoc, fcNameServerFC4Type, fcNameServerPortType, fcNameServerPortIpAddress, fcNameServerFabricPortName, fcNameServerHardAddress, fcNameServerSymbolicPortName, fcNameServerSymbolicNodeName, fcNameServerFC4Features} STATUS deprecated DESCRIPTION "A collection of objects for displaying and configuring Name Server objects." ::= { fcNameServerMIBGroups 1 } fcNameServerStatsGroup OBJECT-GROUP OBJECTS {fcNameServerTotalRejects, fcNameServerInGetReqs, fcNameServerOutGetReqs, fcNameServerInRegReqs, fcNameServerInDeRegReqs, fcNameServerInRscns, fcNameServerOutRscns, fcNameServerRejects} STATUS current DESCRIPTION "A collection of objects for displaying Name Server statistics." ::= { fcNameServerMIBGroups 2 } fcNameServerNotifyControlGroup OBJECT-GROUP OBJECTS {fcNameServerRejectReasonCode, fcNameServerRejReasonCodeExp, fcNameServerRejReqNotifyEnable} STATUS current DESCRIPTION "A collection of notification control and notification information objects for monitoring Name Server registrations/de-registrations." ::= { fcNameServerMIBGroups 3 } fcNameServerNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS {fcNameServerRejectRegNotify, fcNameServerDatabaseFull} STATUS deprecated DESCRIPTION "A collection of notifications for monitoring Name Server registrations/de-registrations." ::= { fcNameServerMIBGroups 4 } fcNameServerDBGroup1 OBJECT-GROUP OBJECTS {fcNameServerProxyPortName, fcNameServerNumRows, fcNameServerTableLastChange, fcNameServerPortName, fcNameServerNodeName, fcNameServerClassOfSvc, fcNameServerNodeIpAddress, fcNameServerProcAssoc, fcNameServerFC4Type, fcNameServerPortType, fcNameServerPortIpAddress, fcNameServerFabricPortName, fcNameServerHardAddress, fcNameServerSymbolicPortName, fcNameServerSymbolicNodeName, fcNameServerFC4Features, fcNameServerPortFunction} STATUS deprecated DESCRIPTION "A collection of objects for displaying and configuring Name Server objects." ::= { fcNameServerMIBGroups 5 } fcNameServerNotifyGroupRev1 NOTIFICATION-GROUP NOTIFICATIONS {fcNameServerRejectRegNotify, fcNameServerDatabaseFull, fcNameServerEntryAdd, fcNameServerEntryDelete} STATUS current DESCRIPTION "A collection of notifications for monitoring Name Server registrations/de-registrations." ::= { fcNameServerMIBGroups 6 } fcNameServerDBGroup2 OBJECT-GROUP OBJECTS {fcNameServerProxyPortName, fcNameServerNumRows, fcNameServerTableLastChange, fcNameServerPortName, fcNameServerNodeName, fcNameServerClassOfSvc, fcNameServerNodeIpAddress, fcNameServerProcAssoc, fcNameServerFC4Type, fcNameServerPortType, fcNameServerPortIpAddress, fcNameServerFabricPortName, fcNameServerHardAddress, fcNameServerSymbolicPortName, fcNameServerSymbolicNodeName, fcNameServerFC4Features} STATUS current DESCRIPTION "A collection of objects for displaying and configuring Name Server objects." ::= { fcNameServerMIBGroups 7 } fcNameServerDBGroup3 OBJECT-GROUP OBJECTS {fcNameServerProxyPortName, fcNameServerNumRows, fcNameServerTableLastChange, fcNameServerPortName, fcNameServerNodeName, fcNameServerClassOfSvc, fcNameServerNodeIpAddress, fcNameServerProcAssoc, fcNameServerFC4Type, fcNameServerPortType, fcNameServerPortIpAddress, fcNameServerFabricPortName, fcNameServerHardAddress, fcNameServerSymbolicPortName, fcNameServerSymbolicNodeName, fcNameServerFC4Features, fcNameServerPermanentPortName} STATUS current DESCRIPTION "A collection of objects for displaying and configuring Name Server objects." ::= { fcNameServerMIBGroups 8 } END