CISCO-PROCESS-MIB device MIB details by Cisco
CISCO-PROCESS-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-PROCESS-MIB.
| Vendor: | Cisco |
|---|---|
| Mib: | CISCO-PROCESS-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- CISCO-PROCESS-MIB.my: MIB for CPU and process statistics -- -- August 1998, Ramanathan R. Kavasseri -- -- Copyright (c) 1998, 2001 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- CISCO-PROCESS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI TimeStamp, DisplayString, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ciscoMgmt FROM CISCO-SMI EntPhysicalIndexOrZero FROM CISCO-TC; ciscoProcessMIB MODULE-IDENTITY LAST-UPDATED "200301220000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "The MIB module to describe active system processes." REVISION "200301220000Z" DESCRIPTION "cpmCPUThresholdTable, cpmCPUHistoryTable, cpmCPUProcessHistoryTable are added for CPU thresholding feature." REVISION "200105180000Z" DESCRIPTION "The objects cpmProcExtUtil5Sec, cpmProcExtUtil1Min, cpmProcExtUtil5Min,cpmCPUTotal5sec, cpmCPUTotal1min and cpmCPUTotal5min are deprecated to increase the value range as 0..100. The table cpmProcessExtTable is deprecated. The new objects added are cpmProcessExtRevTable, cpmProcExtMemAllocatedRev, cpmProcExtMemFreedRev, cpmProcExtInvokedRev, cpmProcExtRuntimeRev, cpmProcExtUtil5SecRev, cpmProcExtUtil1MinRev, cpmCPUTotal5MinRev, cpmCPUTotal5secRev, cpmCPUTotal1minRev and cpmCPUTotal5minRev." REVISION "9804150000Z" DESCRIPTION "Initial version of this MIB." ::= { ciscoMgmt 109 } -- This MIB displays memory and CPU utilization on cisco devices. CPU -- utilization will give a general idea of how busy the processor is. -- The numbers are a ratio of the current idle time over the longest -- idle time. Please note that this information should be used as an -- estimate only. ciscoProcessMIBObjects OBJECT IDENTIFIER ::= { ciscoProcessMIB 1 } cpmCPU OBJECT IDENTIFIER ::= { ciscoProcessMIBObjects 1 } cpmProcess OBJECT IDENTIFIER ::= { ciscoProcessMIBObjects 2 } cpmCPUHistory OBJECT IDENTIFIER ::= { cpmProcess 5 } --Cisco CPU Total Table cpmCPUTotalTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmCPUTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of overall CPU statistics. " ::= { cpmCPU 1 } cpmCPUTotalEntry OBJECT-TYPE SYNTAX CpmCPUTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Overall information about the CPU load. Entries in this table come and go as CPUs are added and removed from the system." INDEX { cpmCPUTotalIndex } ::= { cpmCPUTotalTable 1 } CpmCPUTotalEntry ::= SEQUENCE { cpmCPUTotalIndex Unsigned32, cpmCPUTotalPhysicalIndex EntPhysicalIndexOrZero, cpmCPUTotal5sec Gauge32, -- deprecated cpmCPUTotal1min Gauge32, -- deprecated cpmCPUTotal5min Gauge32, -- deprecated cpmCPUTotal5secRev Gauge32, -- deprecated cpmCPUTotal1minRev Gauge32, cpmCPUTotal5minRev Gauge32, cpmCPUMonInterval Unsigned32, cpmCPUTotalMonIntervalValue Gauge32, cpmCPUInterruptMonIntervalValue Gauge32 } cpmCPUTotalIndex OBJECT-TYPE SYNTAX Unsigned32 (1.. 4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely represents a CPU (or group of CPUs) whose CPU load information is reported by a row in this table. This index is assigned arbitrarily by the engine and is not saved over reboots." ::= { cpmCPUTotalEntry 1 } cpmCPUTotalPhysicalIndex OBJECT-TYPE SYNTAX EntPhysicalIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero." ::= { cpmCPUTotalEntry 2 } cpmCPUTotal5sec OBJECT-TYPE SYNTAX Gauge32 (1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The overall CPU busy percentage in the last 5 second period. This object obsoletes the busyPer object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by cpmCPUTotal5secRev which has the changed range of value (0..100)." ::= { cpmCPUTotalEntry 3 } cpmCPUTotal1min OBJECT-TYPE SYNTAX Gauge32 (1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The overall CPU busy percentage in the last 1 minute period. This object obsoletes the avgBusy1 object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by cpmCPUTotal1minRev which has the changed range of value (0..100)." ::= { cpmCPUTotalEntry 4 } cpmCPUTotal5min OBJECT-TYPE SYNTAX Gauge32 (1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The overall CPU busy percentage in the last 5 minute period. This object deprecates the avgBusy5 object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by cpmCPUTotal5minRev which has the changed range of value (0..100)." ::= { cpmCPUTotalEntry 5 } cpmCPUTotal5secRev OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonInterval" ::= { cpmCPUTotalEntry 6 } cpmCPUTotal1minRev OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100)." ::= { cpmCPUTotalEntry 7 } cpmCPUTotal5minRev OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100)." ::= { cpmCPUTotalEntry 8 } cpmCPUMonInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "CPU usage monitoring interval. The value of this object in seconds indicates the how often the CPU utilization is calculated and monitored." ::= { cpmCPUTotalEntry 9 } cpmCPUTotalMonIntervalValue OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the last cpmCPUMonInterval period. This object deprecates the object cpmCPUTotal5secRev." ::= { cpmCPUTotalEntry 10 } cpmCPUInterruptMonIntervalValue OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the interrupt context in the last cpmCPUMonInterval period." ::= { cpmCPUTotalEntry 11 } -- Cisco Processes Common Table cpmProcessTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of generic information on all active processes on this device." ::= { cpmProcess 1 } cpmProcessEntry OBJECT-TYPE SYNTAX CpmProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Generic information about an active process on this device. Entries in this table come and go as processes are created and destroyed by the device." INDEX { cpmCPUTotalIndex, cpmProcessPID } ::= { cpmProcessTable 1 } CpmProcessEntry ::= SEQUENCE { cpmProcessPID Unsigned32, cpmProcessName DisplayString, cpmProcessuSecs Unsigned32, -- deprecated cpmProcessAverageUSecs Unsigned32, cpmProcessTimeCreated TimeStamp } cpmProcessPID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the process ID. cpmTimeCreated should be checked against the last time it was polled, and if it has changed the PID has been reused and the entire entry should be polled again." ::= { cpmProcessEntry 1 } cpmProcessName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name associated with this process. If the name is longer than 32 characters, it will be truncated to the first 31 characters, and a `*' will be appended as the last character to imply this is a truncated process name." ::= { cpmProcessEntry 2 } cpmProcessuSecs OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Average elapsed CPU time in microseconds when the process was active. This object is deprecated by cpmProcessAverageUSecs." ::= { cpmProcessEntry 4 } cpmProcessTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the process was created. The process ID and the time when the process was created, uniquely identifies a process." ::= { cpmProcessEntry 5 } cpmProcessAverageUSecs OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Average elapsed CPU time in microseconds when the process was active. This object deprecates the object cpmProcessuSecs." ::= { cpmProcessEntry 6 } -- Cisco processes detail Table. This table is mandatory on systems -- that have the internal capability to keep the information. cpmProcessExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmProcessExtEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table contains information that may or may not be available on all cisco devices. It contains additional objects for the more general cpmProcessTable. This object is deprecated by cpmProcessExtRevTable." ::= { cpmProcess 2 } cpmProcessExtEntry OBJECT-TYPE SYNTAX CpmProcessExtEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry containing additional information for a particular process. This object is deprecated by cpmProcessExtRevEntry." AUGMENTS { cpmProcessEntry } ::= { cpmProcessExtTable 1 } CpmProcessExtEntry ::= SEQUENCE { cpmProcExtMemAllocated Gauge32, cpmProcExtMemFreed Gauge32, cpmProcExtInvoked Counter32, cpmProcExtRuntime Counter32, cpmProcExtUtil5Sec Gauge32, cpmProcExtUtil1Min Gauge32, cpmProcExtUtil5Min Gauge32, cpmProcExtPriority INTEGER } cpmProcExtMemAllocated OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The sum of all the dynamically allocated memory that this process has received from the system. This includes memory that may have been returned. The sum of freed memory is provided by cpmProcExtMemFreed. This object is deprecated by cpmProcExtMemAllocatedRev." ::= { cpmProcessExtEntry 1 } cpmProcExtMemFreed OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The sum of all memory that this process has returned to the system. This object is deprecated by cpmProcExtMemFreedRev." ::= { cpmProcessExtEntry 2 } cpmProcExtInvoked OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of times since cpmTimeCreated that the process has been invoked. This object is deprecated by cpmProcExtInvokedRev." ::= { cpmProcessExtEntry 3 } cpmProcExtRuntime OBJECT-TYPE SYNTAX Counter32 UNITS "microseconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The amount of CPU time the process has used, in microseconds. This object is deprecated by cpmProcExtRuntimeRev." ::= { cpmProcessExtEntry 4 } cpmProcExtUtil5Sec OBJECT-TYPE SYNTAX Gauge32(1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 5 second period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object is deprecated by cpmProcExtUtil5SecRev which has the changed range of value (0..100)." ::= { cpmProcessExtEntry 5 } cpmProcExtUtil1Min OBJECT-TYPE SYNTAX Gauge32(1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 1 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object is deprecated by cpmProcExtUtil1MinRev which has the changed range of value (0..100)." ::= { cpmProcessExtEntry 6 } cpmProcExtUtil5Min OBJECT-TYPE SYNTAX Gauge32(1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 5 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object is deprecated by cpmProcExtUtil5MinRev which has the changed range of value (0..100)." ::= { cpmProcessExtEntry 7 } cpmProcExtPriority OBJECT-TYPE SYNTAX INTEGER { critical(1), high(2), normal(3), low(4), notAssigned(5) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The priority level at which the process is running. This object is deprecated by cpmProcExtPriorityRev." ::= { cpmProcessExtEntry 8 } cpmProcessExtRevTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmProcessExtRevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information that may or may not be available on all cisco devices. It contains additional objects for the more general cpmProcessTable. This object deprecates cpmProcessExtTable." ::= { cpmProcess 3 } cpmProcessExtRevEntry OBJECT-TYPE SYNTAX CpmProcessExtRevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional information for a particular process. This object deprecates cpmProcessExtEntry." INDEX { cpmCPUTotalIndex, cpmProcessPID } ::= { cpmProcessExtRevTable 1 } CpmProcessExtRevEntry ::= SEQUENCE { cpmProcExtMemAllocatedRev Gauge32, cpmProcExtMemFreedRev Gauge32, cpmProcExtInvokedRev Counter32, cpmProcExtRuntimeRev Counter32, cpmProcExtUtil5SecRev Gauge32, cpmProcExtUtil1MinRev Gauge32, cpmProcExtUtil5MinRev Gauge32, cpmProcExtPriorityRev INTEGER } cpmProcExtMemAllocatedRev OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all the dynamically allocated memory that this process has received from the system. This includes memory that may have been returned. The sum of freed memory is provided by cpmProcExtMemFreedRev. This object deprecates cpmProcExtMemAllocated." ::= { cpmProcessExtRevEntry 1 } cpmProcExtMemFreedRev OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all memory that this process has returned to the system. This object deprecates cpmProcExtMemFreed." ::= { cpmProcessExtRevEntry 2 } cpmProcExtInvokedRev OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times since cpmTimeCreated that the process has been invoked. This object deprecates cpmProcExtInvoked." ::= { cpmProcessExtRevEntry 3 } cpmProcExtRuntimeRev OBJECT-TYPE SYNTAX Counter32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of CPU time the process has used, in microseconds. This object deprecates cpmProcExtRuntime." ::= { cpmProcessExtRevEntry 4 } cpmProcExtUtil5SecRev OBJECT-TYPE SYNTAX Gauge32(0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 5 second period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object deprecates cpmProcExtUtil5Sec and increases the value range to (0..100)." ::= { cpmProcessExtRevEntry 5 } cpmProcExtUtil1MinRev OBJECT-TYPE SYNTAX Gauge32(0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 1 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object deprecates cpmProcExtUtil1Min and increases the value range to (0..100)." ::= { cpmProcessExtRevEntry 6 } cpmProcExtUtil5MinRev OBJECT-TYPE SYNTAX Gauge32(0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 5 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object deprecates cpmProcExtUtil5Min and increases the value range to (0..100)." ::= { cpmProcessExtRevEntry 7 } cpmProcExtPriorityRev OBJECT-TYPE SYNTAX INTEGER { critical(1), high(2), normal(3), low(4), notAssigned(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The priority level at which the process is running. This object deprecates cpmProcExtPriority." ::= { cpmProcessExtRevEntry 8 } -- Threshold Table allows the CPU threshold configurations. -- When the configured threshold is reached a NMS will be notified -- with this event. cpmCPUThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmCPUThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the information about the thresholding values for CPU , configured by the user." ::= { cpmProcess 4 } cpmCPUThresholdEntry OBJECT-TYPE SYNTAX CpmCPUThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about CPU thresholding parameters. cpmCPUTotalIndex identifies the CPU (or group of CPUs) for which this configuration applies." INDEX { cpmCPUTotalIndex, cpmCPUThresholdClass } ::= { cpmCPUThresholdTable 1 } CpmCPUThresholdEntry ::= SEQUENCE { cpmCPUThresholdClass INTEGER, cpmCPURisingThresholdValue Unsigned32, cpmCPURisingThresholdPeriod Unsigned32, cpmCPUFallingThresholdValue Unsigned32, cpmCPUFallingThresholdPeriod Unsigned32, cpmCPUThresholdEntryStatus RowStatus } cpmCPUThresholdClass OBJECT-TYPE SYNTAX INTEGER { total(1), -- Total CPU Utilization interrupt(2), -- CPU Utilization in Interrupt context process(3) -- CPU Utilization in process level -- execution context } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Value of this object indicates the type of utilization, which is monitored. The total(1) indicates the total CPU utilization, interrupt(2) indicates the the CPU utilization in interrupt context and process(3) indicates the CPU utilization in the process level execution context." ::= { cpmCPUThresholdEntry 1 } cpmCPURisingThresholdValue OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage rising threshold value configured by the user. The value indicates, if the percentage CPU utilization is equal to or above this value for cpmCPURisingThresholdPeriod duration then send a cpmCPURisingThreshold notification to the NMS." ::= { cpmCPUThresholdEntry 2 } cpmCPURisingThresholdPeriod OBJECT-TYPE SYNTAX Unsigned32(5..4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This is an observation interval. The value of this object indicates that the CPU utilization should be above cpmCPURisingThresholdValue for this duration to send a cpmCPURisingThreshold notification to the NMS." DEFVAL { 5 } ::= { cpmCPUThresholdEntry 3 } cpmCPUFallingThresholdValue OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage falling threshold value configured by the user. The value indicates, if the percentage CPU utilization is equal to or below this value for cpmCPUFallingThresholdPeriod duration then send a cpmCPUFallingThreshold notification to the NMS." ::= { cpmCPUThresholdEntry 4 } cpmCPUFallingThresholdPeriod OBJECT-TYPE SYNTAX Unsigned32(5..4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This is an observation interval. The value of this object indicates that CPU utilization should be below cpmCPUFallingThresholdValue for this duration to send a cpmCPURisingThreshold notification to the NMS." DEFVAL { 5 } ::= { cpmCPUThresholdEntry 5 } cpmCPUThresholdEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { cpmCPUThresholdEntry 6 } cpmCPUHistoryThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The user configured value of this object gives the minimum percent CPU utilization of a process in the last cpmCPUMonInterval duration required to be a member of history table. When this object is changed the new value will have effect in the next interval." ::= { cpmCPUHistory 1 } cpmCPUHistorySize OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "A value configured by the user which specifies the number of reports in the history table. A report contains set of processes which crossed the cpmCPUHistoryThreshold in the last cpmCPUMonInterval along with the time at which this report is created, total and interrupt CPU utilizations. When this object is changed the new value will have effect in the next interval." ::= { cpmCPUHistory 2 } cpmCPUHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmCPUHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of CPU utilization history entries." ::= { cpmCPUHistory 3 } cpmCPUHistoryEntry OBJECT-TYPE SYNTAX CpmCPUHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A historical sample of CPU utilization statistics. cpmCPUTotalIndex identifies the CPU (or group of CPUs) for which this history is collected. When the cpmCPUHistorySize is reached the least recent entry is lost." INDEX { cpmCPUTotalIndex, cpmCPUHistoryReportId } ::= { cpmCPUHistoryTable 1 } CpmCPUHistoryEntry ::= SEQUENCE { cpmCPUHistoryReportId Unsigned32, cpmCPUHistoryReportSize Unsigned32, cpmCPUHistoryTotalUtil Gauge32, cpmCPUHistoryInterruptUtil Gauge32, cpmCPUHistoryCreatedTime TimeStamp } cpmCPUHistoryReportId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "All the entries which are created at the same time will have same value for this object. When the configured threshold for being a part of History table is reached then the qualified processes become the part of history table. The entries which became the part of history table at one instant will have the same value for this object. When this object reaches the max index value then it will wrap around." ::= { cpmCPUHistoryEntry 1 } cpmCPUHistoryReportSize OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of process entries in a report. This object gives information about how many processes became a part of history table at one instant." ::= { cpmCPUHistoryEntry 2 } cpmCPUHistoryTotalUtil OBJECT-TYPE SYNTAX Gauge32(0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Total percentage of CPU utilization at cpmCPUHistoryCreated." ::= { cpmCPUHistoryEntry 3 } cpmCPUHistoryInterruptUtil OBJECT-TYPE SYNTAX Gauge32(0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of CPU utilization in the interrupt context at cpmCPUHistoryCreated." ::= { cpmCPUHistoryEntry 4 } cpmCPUHistoryCreatedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp with respect to sysUpTime indicating the time at which this report is created." ::= { cpmCPUHistoryEntry 5 } -- History table contains the statistics for the processes -- qualified to be a part of history table. -- The statistics are the CPU utilization of processes -- for past 5 second period. cpmCPUProcessHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmCPUProcessHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of process history entries. This table contains CPU utilization of processes which crossed the cpmCPUHistoryThreshold." ::= { cpmCPUHistory 4 } cpmCPUProcessHistoryEntry OBJECT-TYPE SYNTAX CpmCPUProcessHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A historical sample of process utilization statistics. The entries in this table will have corresponding entires in the cpmCPUHistoryTable. The entries in this table get deleted when the entry associated with this entry in the cpmCPUHistoryTable gets deleted." INDEX { cpmCPUTotalIndex, cpmCPUHistoryReportId, cpmCPUProcessHistoryIndex } ::= { cpmCPUProcessHistoryTable 1 } CpmCPUProcessHistoryEntry ::= SEQUENCE { cpmCPUProcessHistoryIndex Unsigned32, cpmCPUHistoryProcId Unsigned32, cpmCPUHistoryProcName DisplayString, cpmCPUHistoryProcCreated TimeStamp, cpmCPUHistoryProcUtil Gauge32 } cpmCPUProcessHistoryIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the cmpCPUProcessHistory table among those in the same report. This index is between 1 to N, where N is the cpmCPUHistoryReportSize." ::= { cpmCPUProcessHistoryEntry 1 } cpmCPUHistoryProcId OBJECT-TYPE SYNTAX Unsigned32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The process Id associated with this entry." ::= { cpmCPUProcessHistoryEntry 2 } cpmCPUHistoryProcName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The process name associated with this entry." ::= { cpmCPUProcessHistoryEntry 3 } cpmCPUHistoryProcCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the process was created. The process ID and the time when the process was created, uniquely identifies a process." ::= { cpmCPUProcessHistoryEntry 4 } cpmCPUHistoryProcUtil OBJECT-TYPE SYNTAX Gauge32(0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage CPU utilization of a process at cpmCPUHistoryCreatedTime." ::= { cpmCPUProcessHistoryEntry 5 } -- notifications ciscoProcessMIBNotifPrefix OBJECT IDENTIFIER ::= { ciscoProcessMIB 2 } ciscoProcessMIBNotifs OBJECT IDENTIFIER ::= { ciscoProcessMIBNotifPrefix 0 } cpmCPURisingThreshold NOTIFICATION-TYPE OBJECTS { cpmCPURisingThresholdValue, cpmCPUTotalMonIntervalValue, cpmCPUInterruptMonIntervalValue, cpmProcExtUtil5SecRev, cpmProcessTimeCreated } STATUS current DESCRIPTION "A cpmCPURisingThreshold notification is sent when configured rising CPU utilization threshold (cpmCPURisingThresholdValue) is reached and CPU utilization remained above the threshold for configured interval(cpmCPURisingThresholdPeriod) and such a notification is requested. The cpmProcExtUtil5SecRev and cpmProcessTimeCreated objects can be repeated multiple times in a notification indicating the top users of CPU." ::= { ciscoProcessMIBNotifs 1 } cpmCPUFallingThreshold NOTIFICATION-TYPE OBJECTS { cpmCPUFallingThresholdValue, cpmCPUTotalMonIntervalValue, cpmCPUInterruptMonIntervalValue } STATUS current DESCRIPTION "A cpmCPUFallingThresholdTrap is sent when the configured falling threshold (cpmCPURisingThresholdValue) is reached and CPU utilization remained under threshold for configured interval (cpmCPUFallingThresholdPeriod) and such a notification is requested." ::= { ciscoProcessMIBNotifs 2 } -- conformance information ciscoProcessMIBConformance OBJECT IDENTIFIER ::= { ciscoProcessMIB 3 } cpmCompliances OBJECT IDENTIFIER ::= { ciscoProcessMIBConformance 1 } cpmGroups OBJECT IDENTIFIER ::= { ciscoProcessMIBConformance 2 } cProcessMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco Process MIB. This is deprecated and new compliance cProcessMIBComplianceRev is added." MODULE -- this module MANDATORY-GROUPS { cpmCPUTotalGroup, cpmProcessGroup } GROUP cpmProcessExtGroup DESCRIPTION "The cpmProcessExtGroup is optional for all entities." OBJECT cpmProcExtPriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { cpmCompliances 1 } cProcessMIBComplianceRev MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBCompliance." MODULE -- this module MANDATORY-GROUPS { cpmCPUTotalGroupRev, cpmProcessGroupRev} GROUP cpmProcessExtGroupRev DESCRIPTION "The cpmProcessExtGroupRev is optional for all entities. This object is defined after deprecating cpmProcessExtGroup." ::= { cpmCompliances 2 } cProcessMIBComplianceRev1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev." MODULE -- this module MANDATORY-GROUPS { cpmCPUThresholdGroup, cpmCPUTotalGroupRev1 } GROUP cpmCPUHistoryGroup DESCRIPTION "The cpmCPUHistoryGroup is optional and gives the information about process CPU utilization history." GROUP cpmCPUThresholdNotificationGroup DESCRIPTION "The cpmCPUThresholdNotificationGroup is optional and these traps indicates that configured threshold is reached." ::= { cpmCompliances 3 } -- units of conformance cpmCPUTotalGroup OBJECT-GROUP OBJECTS { cpmCPUTotalPhysicalIndex, cpmCPUTotal5sec, cpmCPUTotal1min, cpmCPUTotal5min } STATUS deprecated DESCRIPTION "A collection of objects providing CPU load monitoring information. This group is mandatory for all cisco devices. This group is deprecated since the objects cpmCPUTotal5sec, cpmCPUTotal1min and cpmCPUTotal5min are deprecated. A new object cpmCPUTotalGroupRev is added in place of it." ::= { cpmGroups 1 } cpmProcessGroup OBJECT-GROUP OBJECTS { cpmProcessPID, cpmProcessName, cpmProcessuSecs, cpmProcessTimeCreated } STATUS deprecated DESCRIPTION "A collection of objects providing common process monitoring information. This group is mandatory for all cisco devices. This object is deprecated by cpmProcessGroupRev." ::= { cpmGroups 2 } cpmProcessExtGroup OBJECT-GROUP OBJECTS { cpmProcExtMemAllocated, cpmProcExtMemFreed, cpmProcExtInvoked, cpmProcExtRuntime, cpmProcExtUtil5Sec, cpmProcExtUtil1Min, cpmProcExtUtil5Min, cpmProcExtPriority } STATUS deprecated DESCRIPTION "A collection of objects providing additional and more detailed process monitoring information. This group is mandatory for all cisco devices that have the internal capability to keep this information. This group is deprecated and new group cpmProcessExtGroupRev is added." ::= { cpmGroups 3 } cpmCPUTotalGroupRev OBJECT-GROUP OBJECTS { cpmCPUTotalPhysicalIndex, cpmCPUTotal5secRev, cpmCPUTotal1minRev, cpmCPUTotal5minRev } STATUS deprecated DESCRIPTION "A collection of objects providing CPU load monitoring information. This group is mandatory for all cisco devices. This group deprecates cpmCPUTotalGroup. This group is deprecated since the object cpmCPUTotal5secRev is deprecated. A new object cpmCPUTotalGroupRev1 is added in place of it." ::= { cpmGroups 4 } cpmProcessExtGroupRev OBJECT-GROUP OBJECTS { cpmProcExtMemAllocatedRev, cpmProcExtMemFreedRev, cpmProcExtInvokedRev, cpmProcExtRuntimeRev, cpmProcExtUtil5SecRev, cpmProcExtUtil1MinRev, cpmProcExtUtil5MinRev, cpmProcExtPriorityRev } STATUS current DESCRIPTION "A collection of objects providing additional and more detailed process monitoring information. This group is mandatory for all cisco devices that have the internal capability to keep this information. This group is formed after deprecating cpmProcessExtGroup. cpmProcExtMemAllocatedRev, cpmProcExtMemFreedRev, cpmProcExtInvokedRev, cpmProcExtRuntimeRev, cpmProcExtUtil5SecRev, cpmProcExtUtil1MinRev and cpmProcExtUtil5MinRev are the new objects added." ::= { cpmGroups 5 } cpmProcessGroupRev OBJECT-GROUP OBJECTS { cpmProcessPID, cpmProcessName, cpmProcessAverageUSecs, cpmProcessTimeCreated } STATUS current DESCRIPTION "A collection of objects providing common process monitoring information. This group is mandatory for all cisco devices. This object deprecates cpmProcessGroup." ::= { cpmGroups 6 } cpmCPUTotalGroupRev1 OBJECT-GROUP OBJECTS { cpmCPUTotalPhysicalIndex, cpmCPUTotal1minRev, cpmCPUTotal5minRev, cpmCPUMonInterval, cpmCPUTotalMonIntervalValue, cpmCPUInterruptMonIntervalValue } STATUS current DESCRIPTION "A collection of objects providing CPU load monitoring information. This group is mandatory for all cisco devices. This group deprecates cpmCPUTotalGroupRev." ::= { cpmGroups 7 } cpmCPUThresholdGroup OBJECT-GROUP OBJECTS { cpmCPURisingThresholdValue, cpmCPURisingThresholdPeriod, cpmCPUFallingThresholdValue, cpmCPUFallingThresholdPeriod, cpmCPUThresholdEntryStatus } STATUS current DESCRIPTION "A collection of objects used for configuration of thresholding." ::= { cpmGroups 8 } cpmCPUHistoryGroup OBJECT-GROUP OBJECTS { cpmCPUHistorySize, cpmCPUHistoryThreshold, cpmCPUHistoryTotalUtil, cpmCPUHistoryInterruptUtil, cpmCPUHistoryCreatedTime, cpmCPUHistoryReportSize, cpmCPUHistoryProcId, cpmCPUHistoryProcName, cpmCPUHistoryProcCreated, cpmCPUHistoryProcUtil } STATUS current DESCRIPTION "A collection of objects providing information about CPU utilization history." ::= { cpmGroups 9 } cpmCPUThresholdNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { cpmCPURisingThreshold, cpmCPUFallingThreshold } STATUS current DESCRIPTION "A group of notifications." ::= { cpmGroups 10 } END