| ciscoLS1010ChassisSysType |
.1.3.6.1.4.1.9.5.11.1.1.1 |
|
The chassis system type.
|
| ciscoLS1010ChassisBkplType |
.1.3.6.1.4.1.9.5.11.1.1.2 |
|
The chassis backplane type.
|
| ciscoLS1010ChassisPs0Type |
.1.3.6.1.4.1.9.5.11.1.1.3 |
|
Type of power supply number 1.
|
| ciscoLS1010ChassisPs0AdminStatus |
.1.3.6.1.4.1.9.5.11.1.1.4 |
|
Enable or disable power supply 1.
|
| ciscoLS1010ChassisPs0Status |
.1.3.6.1.4.1.9.5.11.1.1.5 |
|
Status of power supply number 1.
|
| ciscoLS1010ChassisPs0Led |
.1.3.6.1.4.1.9.5.11.1.1.6 |
|
LED Status of power supply number 1.
|
| ciscoLS1010ChassisPs1Type |
.1.3.6.1.4.1.9.5.11.1.1.7 |
|
Type of power supply number 2.
|
| ciscoLS1010ChassisPs1AdminStatus |
.1.3.6.1.4.1.9.5.11.1.1.8 |
|
Enable or disable power supply 2.
|
| ciscoLS1010ChassisPs1Status |
.1.3.6.1.4.1.9.5.11.1.1.9 |
|
Status of power supply number 2.
|
| ciscoLS1010ChassisPs1Led |
.1.3.6.1.4.1.9.5.11.1.1.10 |
|
LED Status of power supply number 2.
|
| ciscoLS1010ChassisFanStatus |
.1.3.6.1.4.1.9.5.11.1.1.11 |
|
Status of the chassis fan.
|
| ciscoLS1010ChassisFanLed |
.1.3.6.1.4.1.9.5.11.1.1.12 |
|
LED Status of fan.
|
| ciscoLS1010ChassisCardStatusLed |
.1.3.6.1.4.1.9.5.11.1.1.13 |
|
LED Status of CPU card.
|
| ciscoLS1010ChassisEnetLinkLed |
.1.3.6.1.4.1.9.5.11.1.1.14 |
|
Ethernet link status LED of CPU card.
|
| ciscoLS1010Chassis12VoltStatus |
.1.3.6.1.4.1.9.5.11.1.1.15 |
|
The chassis 12V status.
|
| ciscoLS1010ChassisTempStatus |
.1.3.6.1.4.1.9.5.11.1.1.16 |
|
The chassis temperature status.
The values of minorWarning(3), majorWarning(4) and
criticalWarning(5) will be primarily used by C6400
to indicate the core temperature. C6400 will never
report overTemperature(2) status.
In C6400 there are two temperature sensors: core
and inlet. C6400 use this object to represent the
core temperature and the other object
ciscoLS1010ChassisInletTempStatus to represent the
inlet temperature.
|
| ciscoLS1010ChassisPcmciaSlot0Type |
.1.3.6.1.4.1.9.5.11.1.1.17 |
|
Type of PCMCIA slot 0 type.
|
| ciscoLS1010ChassisPcmciaSlot1Type |
.1.3.6.1.4.1.9.5.11.1.1.18 |
|
Type of PCMCIA slot 1 type.
|
| ciscoLS1010ChassisNumSlots |
.1.3.6.1.4.1.9.5.11.1.1.19 |
|
The number of slots in the chassis for plug-in modules.
|
| ciscoLS1010ChassisLastChange |
.1.3.6.1.4.1.9.5.11.1.1.20 |
|
The last time chassis physical content get changed.
|
| ciscoLS1010ChassisFailureAction |
.1.3.6.1.4.1.9.5.11.1.1.21 |
|
The action to take when there is any chassis failure,
which includes either power supply, voltage,
temperature and fan failure.
|
| ciscoLS1010ChassisChangeAction |
.1.3.6.1.4.1.9.5.11.1.1.22 |
|
The action to take when there is any chassis change,
which includes either power supply, fan and boards.
|
| ciscoLS1010ChassisClockingMode |
.1.3.6.1.4.1.9.5.11.1.1.23 |
|
The clocking mode of the ls1010 system. By default,
the mode is non-revertive, which means that the clock
will stick to the current priority, even though higher
priority clock is available.
|
| ciscols1010SystemClockSourceStatus |
.1.3.6.1.4.1.9.5.11.1.1.24 |
|
The network clock source status of 'system' source:
'notSelected' indicates 'system' not selected as the
network clock source.
'selected' indicates ASP freerunning(system) is selected as
network clock source.
|
| ciscols1010SystemClockSourcePriority |
.1.3.6.1.4.1.9.5.11.1.1.25 |
|
The highest priority at which 'system' is configured as
a network clock source.
|
| ciscoLS1010ChassisInletTempStatus |
.1.3.6.1.4.1.9.5.11.1.1.26 |
|
C6400 has two temperature sensors: core and
inlet. C6400 use this object to represent the
inlet temperature and use the object
ciscoLS1010ChassisTempStatus to represent the
core temperature.
|
| ciscoLS1010ModuleEntry |
.1.3.6.1.4.1.9.5.11.1.2.1.1 |
|
Entry containing information about one module in a
slot of the chassis.
|
| ciscoLS1010SubModuleEntry |
.1.3.6.1.4.1.9.5.11.1.3.1.1 |
|
Entry containing information about one sub-module in a
sub-slot of the module.
|
| ciscoLS1010PortEntry |
.1.3.6.1.4.1.9.5.11.1.4.1.1 |
|
Entry containing information for a particular port on
a sub-module.
|
| clsEnetPortEntry |
.1.3.6.1.4.1.9.5.11.1.6.1.1 |
|
Entry contains information of a particular
ethernet port.
|
| clsPortLedEntry |
.1.3.6.1.4.1.9.5.11.1.7.1.1 |
|
Entry contains information of a particular
LED associated with a particular port which
is identified by ifIndex.
|
| ciscoAtmCpuAdminStatus |
.1.3.6.1.4.1.9.5.11.1.5.1 |
|
Reset will reload the CPU board.
|
| ciscoAtmSwitchTotalBuffer |
.1.3.6.1.4.1.9.5.11.1.5.2 |
|
The total cell buffer count in switch's shared memory.
|
| ciscoAtmSwitchFreeBuffer |
.1.3.6.1.4.1.9.5.11.1.5.3 |
|
The free cell buffer count in switch's shared memory.
|
| ciscoAtmSwitchDiscardCells |
.1.3.6.1.4.1.9.5.11.1.5.4 |
|
The total discarded cells of the switch.
|
| ciscoAtmSwitchInvalidCells |
.1.3.6.1.4.1.9.5.11.1.5.5 |
|
The total invalid cells of the switch.
|
| ciscoAtmSwitchInvalidCellHeaderEntry |
.1.3.6.1.4.1.9.5.11.1.5.6.1 |
|
a entry of invalid cell header.
|
| ciscoAtmCpuTerminateOamFlow |
.1.3.6.1.4.1.9.5.11.1.5.7 |
|
Terminate all the incoming OAM cells to the CPU port.
|
| ciscoAtmInterceptEndToEndOamFlow |
.1.3.6.1.4.1.9.5.11.1.5.8 |
|
Indicates whether incoming end-to-end OAM flow
cells are sent to the switch CPU.
If the value is 'true', all incoming
end-to-end OAM flow cells, including those on
transit connections, are sent to the switch
CPU.
This value may be modified at any time. The
modified value will apply to all existing
connections.
Note that if the value is 'false', the switch
can not use the ATM PING application for
end-to-end loopback on transit connections,
since the end-to-end OAM cells on such connections
will not be seen by the switch CPU.
|
| ciscoLS1010ModuleIndex |
.1.3.6.1.4.1.9.5.11.1.2.1.1.1 |
|
A unique value for each module.
|
| ciscoLS1010ModuleType |
.1.3.6.1.4.1.9.5.11.1.2.1.1.2 |
|
The type of module.
|
| ciscoLS1010ModuleSerialNumber |
.1.3.6.1.4.1.9.5.11.1.2.1.1.3 |
|
The serial number of the module.
Deprecated in favor of object
ciscoLS1010ModuleSerialNumberString. This object
returns 0 for modules using an alphanumeric
numbering scheme.
|
| ciscoLS1010ModuleHwVersion |
.1.3.6.1.4.1.9.5.11.1.2.1.1.4 |
|
The hardware version of the module.
|
| ciscoLS1010ModuleSwVersion |
.1.3.6.1.4.1.9.5.11.1.2.1.1.5 |
|
The software version number.
|
| ciscoLS1010ModuleDescr |
.1.3.6.1.4.1.9.5.11.1.2.1.1.6 |
|
A descriptive string used by the agent
to describe the module.
|
| ciscoLS1010ModuleNumSubModules |
.1.3.6.1.4.1.9.5.11.1.2.1.1.7 |
|
The max number of sub-modules supported by this module.
|
| ciscoLS1010ModuleAdminStatus |
.1.3.6.1.4.1.9.5.11.1.2.1.1.8 |
|
This object, when read, always returns a value of
ok(1). Setting this object to one of the
acceptable values gives the following results:
reset: reset the module's control logic
enable: enable the module
disable: disable the module
Setting this object to any other values results in
an error.
|
| ciscoLS1010ModuleOperStatus |
.1.3.6.1.4.1.9.5.11.1.2.1.1.9 |
|
Operational status of the module.
|
| ciscoLS1010ModuleHwVersionMinor |
.1.3.6.1.4.1.9.5.11.1.2.1.1.10 |
|
The minor hardware version of the module.
|
| ciscoLS1010ModuleSerialNumberString |
.1.3.6.1.4.1.9.5.11.1.2.1.1.11 |
|
The serial number of the module.
|
| ciscoLS1010SubModuleIndex |
.1.3.6.1.4.1.9.5.11.1.3.1.1.1 |
|
A unique value for each sub-module within the module.
This value is determined by sub-slot number where the
sub-module is inserted.
|
| ciscoLS1010SubModuleType |
.1.3.6.1.4.1.9.5.11.1.3.1.1.2 |
|
The type of sub-module.
|
| ciscoLS1010SubModuleSerialNumber |
.1.3.6.1.4.1.9.5.11.1.3.1.1.3 |
|
The serial number of the sub-module.
Deprecated in favor of object
ciscoLS1010SubModuleSerialNumberString. This
object returns 0 for submodules using
an alphanumeric numbering scheme.
|
| ciscoLS1010SubModuleHwVersion |
.1.3.6.1.4.1.9.5.11.1.3.1.1.4 |
|
The major hardware version of the sub-module.
Together with ciscoLS1010SubModuleHwVersionMinor,
this completely specifies the hardware version of
the sub-module.
|
| ciscoLS1010SubModuleSwVersion |
.1.3.6.1.4.1.9.5.11.1.3.1.1.5 |
|
The software version number.
|
| ciscoLS1010SubModuleDescr |
.1.3.6.1.4.1.9.5.11.1.3.1.1.6 |
|
A descriptive string used by the agent
to describe the module.
|
| ciscoLS1010SubModuleNumPorts |
.1.3.6.1.4.1.9.5.11.1.3.1.1.7 |
|
The maximum number of ports supported by
this sub-module.
|
| ciscoLS1010SubModuleAdminStatus |
.1.3.6.1.4.1.9.5.11.1.3.1.1.8 |
|
This object can be read/written as reset or ok.
|
| ciscoLS1010SubModuleHwVersionMinor |
.1.3.6.1.4.1.9.5.11.1.3.1.1.9 |
|
The minor hardware version of the sub-module.
Together with ciscoLS1010SubModuleHwVersion,
this completely specifies the hardware version of
the sub-module.
|
| ciscoLS1010SubModuleOperStatus |
.1.3.6.1.4.1.9.5.11.1.3.1.1.10 |
|
Operational status of the submodule.
|
| ciscoLS1010SubModuleSerialNumberString |
.1.3.6.1.4.1.9.5.11.1.3.1.1.11 |
|
The serial number of the sub-module.
|
| ciscoLS1010PortIndex |
.1.3.6.1.4.1.9.5.11.1.4.1.1.1 |
|
An index value that uniquely identifies this port within
a sub-module. The value is determined by the location of
the port on the sub-module. Valid entries are 1 to the
value of subModuleNumPorts for this sub-module.
|
| ciscoLS1010PortIfIndex |
.1.3.6.1.4.1.9.5.11.1.4.1.1.2 |
|
The ifIndex value assigned to this port.
|
| clsEnetPortDuplex |
.1.3.6.1.4.1.9.5.11.1.6.1.1.1 |
|
Indicates whether the port is operating
in half-duplex, full-duplex, or auto mode.
If the port could not agree with the far end on
port duplex, the port will be in auto(2) mode.
Unknown(1) indicates either the port does not
support duplex mode, or the duplex mode is
none of the defined.
|
| clsEnetPortAdminSpeed |
.1.3.6.1.4.1.9.5.11.1.6.1.1.2 |
|
Indicates the desired speed of the port
in bits per second.
The current operational speed of the port
is determined by ifSpeed.
If the port could not agree with the far end on
port speed, the port will be in auto(2) mode,
which will force the port to transmit in speed
whichever is lower.
Unknown(1) indicates either the port does not
support admin speed, or the admin speed is
none of the defined.
|
| clsEnetPortType |
.1.3.6.1.4.1.9.5.11.1.6.1.1.3 |
|
The type of physical layer medium-dependent
interface on the port.
unknown(1) indicates that the port type is none of
those defined. empty(6) indicates that the port is
not present.
|
| clsEnetPortLinkStatus |
.1.3.6.1.4.1.9.5.11.1.6.1.1.4 |
|
This object indicates how the link status
of the port came up.
autoNegotiate(2) -- the port will try to
negotiate the link with the partner port.
If successful, the link will come up,
otherwise the link will remain down.
forceUp(3) -- the port will force the link
up irrespective of its partner port. This
will bring up the link in full duplex only.
Default is autoNegotiate(2).
|
| clsPortLedIndex |
.1.3.6.1.4.1.9.5.11.1.7.1.1.1 |
|
An index that uniquely identifies this LED
among all the LEDs associated with the port
identified by ifIndex.
This value is related to the physical location
of the LED, and is in ascending order from
top to bottom, left to right.
|
| clsPortLedType |
.1.3.6.1.4.1.9.5.11.1.7.1.1.2 |
|
Indicates the type or label of the LED.
|
| clsPortLedStatus |
.1.3.6.1.4.1.9.5.11.1.7.1.1.3 |
|
Indicates the status of the LED.
Unknown(1) indicates either the LED status is
not supported or the status is none of the
defined.
|
| ciscoAtmSwitchInvalidCellHeaderIndex |
.1.3.6.1.4.1.9.5.11.1.5.6.1.1 |
|
A sequence number that identifies a invalid cell header
entry in the table.
|
| ciscoAtmSwitchInvalidCellHeader |
.1.3.6.1.4.1.9.5.11.1.5.6.1.2 |
|
The most recently received invalid cells header.
octet 0 is port number (0-32),
octet 1 bit 7-5 is PTI,
octet 1 bit 4 is CLP,
octet 1 bit 3-0 is GFC,
octet 2 is VPI,
octet 3 is high byte of VCI
octet 4 is low byte of VCI.
|
| ciscoLS1010ChassisMIBGroup |
.1.3.6.1.4.1.9.5.11.3.2.1 |
|
A collection of objects providing rhino chassis information
|
| ciscoLS1010ChassisMIBRev1Group |
.1.3.6.1.4.1.9.5.11.3.2.3 |
|
A collection of objects useful for reporting the hardware
version of sub-modules in the chassis.
|
| ciscoLS1010ChassisMIBClockingGroup |
.1.3.6.1.4.1.9.5.11.3.2.4 |
|
A collection of objects useful for managing clocking.
|
| ciscoLS1010ChassisMIBGroup1 |
.1.3.6.1.4.1.9.5.11.3.2.5 |
|
A collection of objects for managing the LS1010 chassis.
|
| clsEnetPortGroup1 |
.1.3.6.1.4.1.9.5.11.3.2.6 |
|
A collection of objects for managing ethernet ports.
|
| clsPortLedGroup1 |
.1.3.6.1.4.1.9.5.11.3.2.7 |
|
A collection of objects for showing port LEDs.
|
| clsOperStatusGroup |
.1.3.6.1.4.1.9.5.11.3.2.8 |
|
A collection of objects for displaying operational status of
modules and sub-modules in the chassis.
|
| clsInletTempGroup |
.1.3.6.1.4.1.9.5.11.3.2.9 |
|
A collection of objects for reporting inlet temperature.
|
| ciscoLS1010ChassisMIBGroup2 |
.1.3.6.1.4.1.9.5.11.3.2.10 |
|
A collection of objects for managing the
LS1010 chassis.
|
| ciscoLS1010ChassisMIBObsoleteGroup |
.1.3.6.1.4.1.9.5.11.3.2.2 |
|
A collection of objects providing rhino chassis information
which are obsolete.
|
| ciscoLS1010ChassisMIBDeprecatedGroup |
.1.3.6.1.4.1.9.5.11.3.2.11 |
|
A collection of objects providing rhino
chassis information which are obsolete.
|
| ciscoLS1010ChassisMIBNotificationGroup |
.1.3.6.1.4.1.9.5.11.3.2.12 |
|
A collection of notifications supported
by LS1010 chassis.
|
