CISCO-SNMP-NOTIFICATION-CAPABILITY device MIB details by Cisco

CISCO-SNMP-NOTIFICATION-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-SNMP-NOTIFICATION-CAPABILITY.

Vendor:	Cisco
Mib:	CISCO-SNMP-NOTIFICATION-CAPABILITY  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-SNMP-NOTIFICATION-CAPABILITY.my:
-- Cisco SNMP-NOTIFICATION-MIB AGENT-CAPABILITIES
--
-- July 2004, Rashmi Purandare
--
-- Copyright (c) 2003, 2004 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-SNMP-NOTIFICATION-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoSnmpNotificationCapability MODULE-IDENTITY
        LAST-UPDATED    "200407280000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 West Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-lan-switch-snmp@cisco.com, cs-snmp@cisco.com"
        DESCRIPTION
                "The capabilities description of SNMP-NOTIFICATION-MIB."

        REVISION        "200407280000Z"
        DESCRIPTION
                "Added capability for VISM Release 3.3."

        REVISION        "200308280000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoAgentCapability 330 }

cSnmpNotifCapCatOSV05R0501 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "Cisco CatOS 5.5(1)."
    STATUS               current
    DESCRIPTION          "SNMP-NOTIFICATION-MIB capabilities."

    SUPPORTS             SNMP-NOTIFICATION-MIB
        INCLUDES         { snmpNotifyGroup, snmpNotifyFilterGroup }

        VARIATION        snmpNotifyTag
            SYNTAX       OCTET STRING (SIZE (0..32))
            DESCRIPTION  "Maximum tag size supported is 32 characters."

        VARIATION        snmpNotifyStorageType
            SYNTAX       INTEGER { volatile(2), nonVolatile(3),
                                   readOnly(5) }
            DESCRIPTION  "Only support volatile(2), nonVolatile(3) and
                          readOnly(5)."

        VARIATION        snmpNotifyFilterProfileStorType
            SYNTAX       INTEGER { volatile(2) }
            DESCRIPTION  "Only support volatile(2)."

        VARIATION        snmpNotifyFilterStorageType
            SYNTAX       INTEGER { volatile(2) }
            DESCRIPTION  "Only support volatile(2)."

    ::= { ciscoSnmpNotificationCapability 1 }

cSnmpNotifCapVISM33 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "Cisco VISM Release 3.3."
    STATUS               current
    DESCRIPTION          "SNMP-NOTIFICATION-MIB capabilities."

    SUPPORTS             SNMP-NOTIFICATION-MIB
    INCLUDES             { snmpNotifyFilterGroup }

-- Capabilities for VISM-PR

    VARIATION       snmpNotifyFilterProfileName
    ACCESS          read-only
    DESCRIPTION     "Read only access is supported."

    VARIATION       snmpNotifyFilterProfileStorType
    SYNTAX          INTEGER { nonVolatile(3) }
    ACCESS          read-only
    DESCRIPTION     "Read only access is supported.
                     All rows will have 
                     snmpNotifyFilterProfileStorType of 
                     nonVolatile (3) since it is stored on
                     the processor card hard disk."

    VARIATION       snmpNotifyFilterProfileRowStatus
    SYNTAX          INTEGER { active (1), notReady (3) }
    ACCESS          read-only
    DESCRIPTION     "Read only access is supported.
                     The rowStatus will be active if the 
                     snmpNotifyFilterProfileName has 
                     corresponding active entries in 
                     snmpNotifyFilterTable. It will be 
                     notReady (3) if the 
                     snmpNotifyFilterProfileName has no
                     corresponding active entries in the
                     snmpNotifyFilterTable."

    VARIATION       snmpNotifyFilterMask
    ACCESS          read-only
    DESCRIPTION     "Read only access is supported."

    VARIATION       snmpNotifyFilterType
    SYNTAX          INTEGER { included (1) }
    ACCESS          read-only
    DESCRIPTION     "Read only access.
                     Only included (1) is supported."

    VARIATION       snmpNotifyFilterStorageType
    SYNTAX          INTEGER { nonVolatile(3) }
    ACCESS          read-only
    DESCRIPTION     "Read only access and nonVolatile(3)
                     is supported."

    VARIATION       snmpNotifyFilterRowStatus
    SYNTAX          INTEGER { active(1), 
                              createAndGo(4), 
                              destroy(6) }
    DESCRIPTION     "Only active(1), createAndGo(4), destroy(6)
                     are supported."

    ::= { ciscoSnmpNotificationCapability 2 }

END