CISCO-SSL-PROXY-CAPABILITY device MIB details by Cisco

CISCO-SSL-PROXY-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-SSL-PROXY-CAPABILITY.

Vendor:	Cisco
Mib:	CISCO-SSL-PROXY-CAPABILITY  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-SSL-PROXY-CAPABILITY.my: SSL Proxy Agent Capability MIB file
--
-- July 2003, Fatima Yu
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--

CISCO-SSL-PROXY-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;

ciscoSslProxyCapability MODULE-IDENTITY
    LAST-UPDATED    "200310300000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
    "       Cisco Systems
            Customer Service
                        
            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA
                    
            Tel:    +1 800 553-NETS
                   
            E-mail: cs-snmp@cisco.com, cs-ssl@cisco.com"
    DESCRIPTION
            "Agent capabilities for the CISCO-SSL-PROXY-MIB"
    REVISION        "200310300000Z"
    DESCRIPTION
            "Initial version of this MIB module."

    ::= { ciscoAgentCapability 364 }

ciscoSslProxyCapCat6KV02R01 AGENT-CAPABILITIES

PRODUCT-RELEASE "Cisco Catalyst 6000 SSL Module Release 2.1"
STATUS          current
DESCRIPTION     "MIB Agent Capability of Cisco Catalyst 6000 SSL Module
                Release 2.1"

SUPPORTS        CISCO-SSL-PROXY-MIB
    INCLUDES    { cspGlobalConfigGroup, 
                  cspProxyServiceConfigGroup, 
                  cspSslGroup,
                  cspSsl3Group,
                  cspTls1Group,
                  cspSslErrorGroup,
                  cspCpuStatusGroup,
                  cspProxyServiceNotificationGroup
                }
        
--  cspGlobalConfigGroup variations

    VARIATION   cspGcFIPSMode
    ACCESS      read-only
    DESCRIPTION "Write access is not supported"

    VARIATION   cspGcNotifyProxyServOperStatus
    ACCESS      read-only
    DESCRIPTION "Write access is not supported"
    
    VARIATION   cspGcNotifyPSCertExpiring
    ACCESS      read-only
    DESCRIPTION "Write access is not supported"

    VARIATION   cspGcPSCertExpireInterval
    ACCESS      read-only
    DESCRIPTION "Write access is not supported"

--  cspProxyServiceConfigGroup variations

    -- cspPsConfig variations

    VARIATION   cspPsServiceType
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPsVirtualAddressType
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPsVirtualAddress
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPsVirtualPort
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPsServerAddress
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPsServerAddressType
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPsServerPort
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPsAdminStatus
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPsConfigRowStatus
    ACCESS      not-implemented
    DESCRIPTION "This object is not supported"

    -- cspPsPolicyConfig variations

    VARIATION   cspPspVirTcpPolicyName
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPspSerTcpPolicyName
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPspSslPolicyName
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPspHttpHdrPolicyName
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPspUrlRewritePolicyName
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    --  cspPsKeyCertConfig variations 

    VARIATION   cspPskcTrustPointName
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPskcCertFileName
    ACCESS      not-implemented
    DESCRIPTION "This object is not supported"

    VARIATION   cspPskcKeyName
    ACCESS      read-only
    DESCRIPTION "Create/Write access is not supported"

    VARIATION   cspPskcKeyFileName
    ACCESS      not-implemented
    DESCRIPTION "This object is not supported"

    VARIATION   cspPskcConfigRowStatus
    ACCESS      not-implemented
    DESCRIPTION "This object is not supported"

::= { ciscoSslProxyCapability 1 }

END